1 # Copyright 2008 Openmoko, Inc.
2 # Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
6 # temporary until we can eliminate all drivers using it.
9 depends on ARCH_S3C64XX
12 Base platform code for any Samsung S3C64XX device
15 # Configuration options for the S3C6410 CPU
20 Enable S3C6400 CPU support
25 Enable S3C6410 CPU support
31 config S3C64XX_SETUP_SDHCI
32 select S3C64XX_SETUP_SDHCI_GPIO
35 Internal configuration for default SDHCI setup for S3C6400 and
38 # platform specific device setup
40 config S3C64XX_SETUP_I2C0
44 Common setup code for i2c bus 0.
46 Note, currently since i2c0 is always compiled, this setup helper
47 is always compiled with it.
49 config S3C64XX_SETUP_I2C1
52 Common setup code for i2c bus 1.
54 config S3C64XX_SETUP_FB_24BPP
57 Common setup code for S3C64XX with an 24bpp RGB display helper.
59 config S3C64XX_SETUP_SDHCI_GPIO
62 Common setup code for S3C64XX SDHCI GPIO configurations
64 # S36400 Macchine support
71 select S3C64XX_SETUP_SDHCI
73 Machine support for the Samsung SMDK6400
75 # S3C6410 machine support
81 select S3C64XX_SETUP_FB_24BPP
83 Machine support for the A&W6410
88 select SAMSUNG_DEV_ADC
94 select S3C_DEV_USB_HOST
95 select S3C_DEV_USB_HSOTG
96 select S3C64XX_SETUP_SDHCI
97 select S3C64XX_SETUP_I2C1
98 select S3C64XX_SETUP_FB_24BPP
100 Machine support for the Samsung SMDK6410
102 # At least some of the SMDK6410s were shipped with the card detect
103 # for the MMC/SD slots connected to the same input. This means that
104 # either the boards need to be altered to have channel0 to an alternate
105 # configuration or that only one slot can be used.
108 prompt "SMDK6410 MMC/SD slot setup"
109 depends on MACH_SMDK6410
111 config SMDK6410_SD_CH0
112 bool "Use channel 0 only"
113 depends on MACH_SMDK6410
115 Select CON7 (channel 0) as the MMC/SD slot, as
116 at least some SMDK6410 boards come with the
117 resistors fitted so that the card detects for
118 channels 0 and 1 are the same.
120 config SMDK6410_SD_CH1
121 bool "Use channel 1 only"
122 depends on MACH_SMDK6410
124 Select CON6 (channel 1) as the MMC/SD slot, as
125 at least some SMDK6410 boards come with the
126 resistors fitted so that the card detects for
127 channels 0 and 1 are the same.
131 config SMDK6410_WM1190_EV1
132 bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
133 depends on MACH_SMDK6410
135 select REGULATOR_WM8350
136 select S3C24XX_GPIO_EXTRA64
137 select MFD_WM8350_I2C
138 select MFD_WM8350_CONFIG_MODE_0
139 select MFD_WM8350_CONFIG_MODE_3
140 select MFD_WM8352_CONFIG_MODE_0
142 The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
143 and audio daughtercard for the Samsung SMDK6410 reference
144 platform. Enabling this option will build support for this
145 module into the kernel. The presence of the module will be
146 detected at runtime so the the resulting kernel can be used
147 with or without the 1190-EV1 fitted.
149 config SMDK6410_WM1192_EV1
150 bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
151 depends on MACH_SMDK6410
153 select REGULATOR_WM831X
154 select S3C24XX_GPIO_EXTRA64
157 The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
158 daughtercard for the Samsung SMDK6410 reference platform.
159 Enabling this option will build support for this module into
160 the kernel. The presence of the daughtercard will be
161 detected at runtime so the the resulting kernel can be used
162 with or without the 1192-EV1 fitted.
168 select S3C_DEV_HSMMC1
169 select S3C64XX_SETUP_I2C1
171 Machine support for the Samsung NCP
178 select S3C_DEV_USB_HOST
179 select S3C64XX_SETUP_FB_24BPP
182 Machine support for the Airgoo HMT