Merge branch 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
[pandora-kernel.git] / arch / arm / mach-pxa / balloon3.c
1 /*
2  *  linux/arch/arm/mach-pxa/balloon3.c
3  *
4  *  Support for Balloonboard.org Balloon3 board.
5  *
6  *  Author:     Nick Bane, Wookey, Jonathan McDowell
7  *  Created:    June, 2006
8  *  Copyright:  Toby Churchill Ltd
9  *  Derived from mainstone.c, by Nico Pitre
10  *
11  *  This program is free software; you can redistribute it and/or modify
12  *  it under the terms of the GNU General Public License version 2 as
13  *  published by the Free Software Foundation.
14  */
15
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/sysdev.h>
19 #include <linux/interrupt.h>
20 #include <linux/sched.h>
21 #include <linux/bitops.h>
22 #include <linux/fb.h>
23 #include <linux/gpio.h>
24 #include <linux/ioport.h>
25 #include <linux/mtd/mtd.h>
26 #include <linux/mtd/partitions.h>
27 #include <linux/types.h>
28
29 #include <asm/setup.h>
30 #include <asm/mach-types.h>
31 #include <asm/irq.h>
32 #include <asm/sizes.h>
33
34 #include <asm/mach/arch.h>
35 #include <asm/mach/map.h>
36 #include <asm/mach/irq.h>
37 #include <asm/mach/flash.h>
38
39 #include <mach/pxa27x.h>
40 #include <mach/balloon3.h>
41 #include <mach/audio.h>
42 #include <mach/pxafb.h>
43 #include <mach/mmc.h>
44 #include <mach/udc.h>
45 #include <mach/pxa27x-udc.h>
46 #include <mach/irda.h>
47 #include <mach/ohci.h>
48
49 #include <plat/i2c.h>
50
51 #include "generic.h"
52 #include "devices.h"
53
54 static unsigned long balloon3_irq_enabled;
55
56 static unsigned long balloon3_features_present =
57                 (1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
58                 (1 << BALLOON3_FEATURE_AUDIO) |
59                 (1 << BALLOON3_FEATURE_TOPPOLY);
60
61 int balloon3_has(enum balloon3_features feature)
62 {
63         return (balloon3_features_present & (1 << feature)) ? 1 : 0;
64 }
65 EXPORT_SYMBOL_GPL(balloon3_has);
66
67 int __init parse_balloon3_features(char *arg)
68 {
69         if (!arg)
70                 return 0;
71
72         return strict_strtoul(arg, 0, &balloon3_features_present);
73 }
74 early_param("balloon3_features", parse_balloon3_features);
75
76 static void balloon3_mask_irq(unsigned int irq)
77 {
78         int balloon3_irq = (irq - BALLOON3_IRQ(0));
79         balloon3_irq_enabled &= ~(1 << balloon3_irq);
80         __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
81 }
82
83 static void balloon3_unmask_irq(unsigned int irq)
84 {
85         int balloon3_irq = (irq - BALLOON3_IRQ(0));
86         balloon3_irq_enabled |= (1 << balloon3_irq);
87         __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
88 }
89
90 static struct irq_chip balloon3_irq_chip = {
91         .name           = "FPGA",
92         .ack            = balloon3_mask_irq,
93         .mask           = balloon3_mask_irq,
94         .unmask         = balloon3_unmask_irq,
95 };
96
97 static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
98 {
99         unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
100                                         balloon3_irq_enabled;
101
102         do {
103                 /* clear useless edge notification */
104                 if (desc->chip->ack)
105                         desc->chip->ack(BALLOON3_AUX_NIRQ);
106                 while (pending) {
107                         irq = BALLOON3_IRQ(0) + __ffs(pending);
108                         generic_handle_irq(irq);
109                         pending &= pending - 1;
110                 }
111                 pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
112                                 balloon3_irq_enabled;
113         } while (pending);
114 }
115
116 static void __init balloon3_init_irq(void)
117 {
118         int irq;
119
120         pxa27x_init_irq();
121         /* setup extra Balloon3 irqs */
122         for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
123                 set_irq_chip(irq, &balloon3_irq_chip);
124                 set_irq_handler(irq, handle_level_irq);
125                 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
126         }
127
128         set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
129         set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
130
131         pr_debug("%s: chained handler installed - irq %d automatically "
132                 "enabled\n", __func__, BALLOON3_AUX_NIRQ);
133 }
134
135 static void balloon3_backlight_power(int on)
136 {
137         pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
138         gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
139 }
140
141 static unsigned long balloon3_lcd_pin_config[] = {
142         /* LCD - 16bpp Active TFT */
143         GPIO58_LCD_LDD_0,
144         GPIO59_LCD_LDD_1,
145         GPIO60_LCD_LDD_2,
146         GPIO61_LCD_LDD_3,
147         GPIO62_LCD_LDD_4,
148         GPIO63_LCD_LDD_5,
149         GPIO64_LCD_LDD_6,
150         GPIO65_LCD_LDD_7,
151         GPIO66_LCD_LDD_8,
152         GPIO67_LCD_LDD_9,
153         GPIO68_LCD_LDD_10,
154         GPIO69_LCD_LDD_11,
155         GPIO70_LCD_LDD_12,
156         GPIO71_LCD_LDD_13,
157         GPIO72_LCD_LDD_14,
158         GPIO73_LCD_LDD_15,
159         GPIO74_LCD_FCLK,
160         GPIO75_LCD_LCLK,
161         GPIO76_LCD_PCLK,
162         GPIO77_LCD_BIAS,
163
164         GPIO99_GPIO,            /* Backlight */
165 };
166
167 static struct pxafb_mode_info balloon3_lcd_modes[] = {
168         {
169                 .pixclock               = 38000,
170                 .xres                   = 480,
171                 .yres                   = 640,
172                 .bpp                    = 16,
173                 .hsync_len              = 8,
174                 .left_margin            = 8,
175                 .right_margin           = 8,
176                 .vsync_len              = 2,
177                 .upper_margin           = 4,
178                 .lower_margin           = 5,
179                 .sync                   = 0,
180         },
181 };
182
183 static struct pxafb_mach_info balloon3_pxafb_info = {
184         .modes                  = balloon3_lcd_modes,
185         .num_modes              = ARRAY_SIZE(balloon3_lcd_modes),
186         .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
187         .pxafb_backlight_power  = balloon3_backlight_power,
188 };
189
190 static unsigned long balloon3_mmc_pin_config[] = {
191         GPIO32_MMC_CLK,
192         GPIO92_MMC_DAT_0,
193         GPIO109_MMC_DAT_1,
194         GPIO110_MMC_DAT_2,
195         GPIO111_MMC_DAT_3,
196         GPIO112_MMC_CMD,
197 };
198
199 static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
200 {
201         struct pxamci_platform_data *p_d = dev->platform_data;
202
203         if ((1 << vdd) & p_d->ocr_mask) {
204                 pr_debug("%s: on\n", __func__);
205                 /* FIXME something to prod here? */
206         } else {
207                 pr_debug("%s: off\n", __func__);
208                 /* FIXME something to prod here? */
209         }
210 }
211
212 static struct pxamci_platform_data balloon3_mci_platform_data = {
213         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
214         .setpower       = balloon3_mci_setpower,
215 };
216
217 static int balloon3_udc_is_connected(void)
218 {
219         pr_debug("%s: udc connected\n", __func__);
220         return 1;
221 }
222
223 static void balloon3_udc_command(int cmd)
224 {
225         switch (cmd) {
226         case PXA2XX_UDC_CMD_CONNECT:
227                 UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
228                 pr_debug("%s: connect\n", __func__);
229                 break;
230         case PXA2XX_UDC_CMD_DISCONNECT:
231                 UP2OCR &= ~UP2OCR_DPPUE;
232                 pr_debug("%s: disconnect\n", __func__);
233                 break;
234         }
235 }
236
237 static struct pxa2xx_udc_mach_info balloon3_udc_info = {
238         .udc_is_connected = balloon3_udc_is_connected,
239         .udc_command      = balloon3_udc_command,
240 };
241
242 static struct pxaficp_platform_data balloon3_ficp_platform_data = {
243         .transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
244 };
245
246 static unsigned long balloon3_ohci_pin_config[] = {
247         GPIO88_USBH1_PWR,
248         GPIO89_USBH1_PEN,
249 };
250
251 static struct pxaohci_platform_data balloon3_ohci_platform_data = {
252         .port_mode      = PMM_PERPORT_MODE,
253         .flags          = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
254 };
255
256 static unsigned long balloon3_pin_config[] __initdata = {
257         /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
258         GPIO42_BTUART_RXD,
259         GPIO43_BTUART_TXD,
260         GPIO44_BTUART_CTS,
261         GPIO45_BTUART_RTS,
262
263         /* Wakeup GPIO */
264         GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
265
266         /* NAND & IDLE LED GPIOs */
267         GPIO9_GPIO,
268         GPIO10_GPIO,
269 };
270
271 static struct gpio_led balloon3_gpio_leds[] = {
272         {
273                 .name                   = "balloon3:green:idle",
274                 .default_trigger        = "heartbeat",
275                 .gpio                   = BALLOON3_GPIO_LED_IDLE,
276                 .active_low             = 1,
277         },
278         {
279                 .name                   = "balloon3:green:nand",
280                 .default_trigger        = "nand-disk",
281                 .gpio                   = BALLOON3_GPIO_LED_NAND,
282                 .active_low             = 1,
283         },
284 };
285
286 static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
287         .leds           = balloon3_gpio_leds,
288         .num_leds       = ARRAY_SIZE(balloon3_gpio_leds),
289 };
290
291 static struct platform_device balloon3led_device = {
292         .name   = "leds-gpio",
293         .id     = -1,
294         .dev    = {
295                 .platform_data  = &balloon3_gpio_leds_platform_data,
296         },
297 };
298
299 static void __init balloon3_init(void)
300 {
301         pr_info("Initialising Balloon3\n");
302
303         /* system bus arbiter setting
304          * - Core_Park
305          * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
306          */
307         ARB_CNTRL = ARB_CORE_PARK | 0x234;
308
309         pxa_set_ffuart_info(NULL);
310         pxa_set_btuart_info(NULL);
311         pxa_set_stuart_info(NULL);
312
313         pxa_set_i2c_info(NULL);
314         if (balloon3_has(BALLOON3_FEATURE_AUDIO))
315                 pxa_set_ac97_info(NULL);
316
317         if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
318                 pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
319                 gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT,
320                         "LCD Backlight Power");
321                 gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
322                 set_pxa_fb_info(&balloon3_pxafb_info);
323         }
324
325         if (balloon3_has(BALLOON3_FEATURE_MMC)) {
326                 pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
327                 pxa_set_mci_info(&balloon3_mci_platform_data);
328         }
329         pxa_set_ficp_info(&balloon3_ficp_platform_data);
330         if (balloon3_has(BALLOON3_FEATURE_OHCI)) {
331                 pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config));
332                 pxa_set_ohci_info(&balloon3_ohci_platform_data);
333         }
334         pxa_set_udc_info(&balloon3_udc_info);
335
336         pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
337
338         platform_device_register(&balloon3led_device);
339 }
340
341 static struct map_desc balloon3_io_desc[] __initdata = {
342         {       /* CPLD/FPGA */
343                 .virtual        =  BALLOON3_FPGA_VIRT,
344                 .pfn            = __phys_to_pfn(BALLOON3_FPGA_PHYS),
345                 .length         = BALLOON3_FPGA_LENGTH,
346                 .type           = MT_DEVICE,
347         },
348 };
349
350 static void __init balloon3_map_io(void)
351 {
352         pxa_map_io();
353         iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
354 }
355
356 MACHINE_START(BALLOON3, "Balloon3")
357         /* Maintainer: Nick Bane. */
358         .phys_io        = 0x40000000,
359         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
360         .map_io         = balloon3_map_io,
361         .init_irq       = balloon3_init_irq,
362         .timer          = &pxa_timer,
363         .init_machine   = balloon3_init,
364         .boot_params    = PHYS_OFFSET + 0x100,
365 MACHINE_END