3 menu "Intel PXA2xx/PXA3xx Implementations"
5 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
8 bool "Intel DBPXA250 Development Platform (aka Lubbock)"
11 select PXA_HAVE_BOARD_IRQS
14 bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
17 select PXA_HAVE_BOARD_IRQS
23 select PXA_HAVE_BOARD_IRQS
25 config MACH_ZYLONITE300
26 bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
31 config MACH_ZYLONITE320
32 bool "PXA3xx Development Platform (aka Zylonite) PXA320"
37 bool "PXA3xx Form Factor Platform (aka Littleton)"
43 bool "PXA930 Evaluation Board (aka TavorEVB)"
48 bool "PXA930 Handheld Platform (aka SAAR)"
52 comment "Third Party Dev Platforms (sorted by vendor name)"
55 bool "Accelent Xscale IDP"
59 bool "Arcom/Eurotech VIPER SBC"
64 select PXA_HAVE_BOARD_IRQS
65 select PXA_HAVE_ISA_IRQS
68 config MACH_ARCOM_ZEUS
69 bool "Arcom/Eurotech ZEUS SBC"
72 select PXA_HAVE_BOARD_IRQS
73 select PXA_HAVE_ISA_IRQS
77 bool "Balloon 3 board"
80 select PXA_HAVE_BOARD_IRQS
83 bool "Enable Cogent CSB726 System On a Module"
87 Say Y here if you intend to run this kernel on a Cogent
88 CSB726 System On Module.
91 bool "Enable support for CSB701 baseboard"
92 depends on MACH_CSB726
95 bool "CompuLab CM-X255/CM-X270 modules"
101 bool "CompuLab EM-x270 platform"
105 bool "CompuLab eXeda platform"
109 bool "CompuLab CM-X300 modules"
116 bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
121 bool "Gumstix XScale 255 boards"
124 Say Y here if you intend to run this kernel on
125 Basix, Connex, ws-200ax, ws-400ax systems
128 prompt "Gumstix Carrier/Expansion Board"
129 depends on ARCH_GUMSTIX
131 config GUMSTIX_AM200EPD
132 bool "Enable AM200EPD board support"
134 config GUMSTIX_AM300EPD
135 bool "Enable AM300EPD board support"
139 config MACH_INTELMOTE2
140 bool "Intel Mote 2 Platform"
143 select PXA_HAVE_BOARD_IRQS
145 config MACH_STARGATE2
146 bool "Intel Stargate 2 Platform"
149 select PXA_HAVE_BOARD_IRQS
152 bool "Iskratel Electronics XCEP"
155 select MTD_PARTITIONS
157 select MTD_CFI_INTELEXT
162 PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
163 Tuned for usage in Libera instruments for particle accelerators.
166 bool "PXA based Keith und Koep Trizeps DIMM-Modules"
169 bool "Keith und Koep Trizeps4 DIMM-Module"
170 depends on TRIZEPS_PXA
171 select TRIZEPS_PCMCIA
174 config MACH_TRIZEPS4WL
175 bool "Keith und Koep Trizeps4-WL DIMM-Module"
176 depends on TRIZEPS_PXA
177 select TRIZEPS_PCMCIA
181 prompt "Select base board for Trizeps module"
182 depends on TRIZEPS_PXA
184 config MACH_TRIZEPS_CONXS
185 bool "ConXS Eval Board"
187 config MACH_TRIZEPS_UCONXS
188 bool "uConXS Eval Board"
190 config MACH_TRIZEPS_ANY
198 Generic option for Arcom Viper/Zeus PCMCIA
200 config TRIZEPS_PCMCIA
203 Enable PCMCIA support for Trizeps modules
205 config MACH_LOGICPD_PXA270
206 bool "LogicPD PXA270 Card Engine Development Platform"
209 select PXA_HAVE_BOARD_IRQS
212 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
215 select PXA_HAVE_BOARD_IRQS
217 config MACH_PCM990_BASEBOARD
218 bool "PHYTEC PCM-990 development board"
220 depends on MACH_PCM027
223 prompt "display on pcm990"
224 depends on MACH_PCM990_BASEBOARD
226 config PCM990_DISPLAY_SHARP
227 bool "sharp lq084v1dg21 stn display"
229 config PCM990_DISPLAY_NEC
230 bool "nec nl6448bc20_18d tft display"
232 config PCM990_DISPLAY_NONE
238 bool "Toradex Colibri PXA270"
241 config MACH_COLIBRI_PXA270_EVALBOARD
242 bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
243 depends on MACH_COLIBRI
245 config MACH_COLIBRI_PXA270_INCOME
246 bool "Income s.r.o. PXA270 SBC"
247 depends on MACH_COLIBRI
250 select PXA_HAVE_BOARD_IRQS
252 config MACH_COLIBRI300
253 bool "Toradex Colibri PXA300/310"
258 config MACH_COLIBRI320
259 bool "Toradex Colibri PXA320"
266 select HAVE_PATA_PLATFORM
268 PXA270 based Single Board Computer.
270 comment "End-user Products (sorted by vendor name)"
273 bool "HP iPAQ hx4700"
277 select PXA_HAVE_BOARD_IRQS
284 bool "HTC Himalaya Support"
288 bool "Enable HTC Magician Support"
292 select PXA_HAVE_BOARD_IRQS
295 bool "Mitac Mio A701 Support"
301 Say Y here if you intend to run this kernel on a
302 MIO A701. Currently there is only basic support
306 bool "Motorola EZX Platform"
310 select PXA_HAVE_BOARD_IRQS
313 bool "Motorola EZX A780"
318 bool "Motorola EZX E680"
322 config MACH_EZX_A1200
323 bool "Motorola EZX A1200"
328 bool "Motorola EZX A910"
333 bool "Motorola EZX E6"
338 bool "Motorola EZX E2"
343 bool "Nec Mobilepro 900/c"
347 bool "PXA based Palm PDAs"
351 bool "Palm Tungsten|E2"
353 depends on ARCH_PXA_PALM
356 Say Y here if you intend to run this kernel on a Palm Tungsten|E2
360 bool "Palm Tungsten|C"
362 depends on ARCH_PXA_PALM
365 Say Y here if you intend to run this kernel on a Palm Tungsten|C
369 bool "Palm Tungsten|T5"
371 depends on ARCH_PXA_PALM
375 Say Y here if you intend to run this kernel on a Palm Tungsten|T5
381 depends on ARCH_PXA_PALM
385 Say Y here if you intend to run this kernel on a Palm T|X
391 depends on ARCH_PXA_PALM
395 Say Y here if you intend to run this kernel on Palm Zire 72
399 bool "Palm LifeDrive"
401 depends on ARCH_PXA_PALM
405 Say Y here if you intend to run this kernel on a Palm LifeDrive
410 depends on ARCH_PXA_PALM
413 bool "Palm Centro 685 (GSM)"
415 depends on ARCH_PXA_PALM
420 Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
426 depends on ARCH_PXA_PALM
431 Say Y here if you intend to run this kernel on Palm Treo 680
434 config MACH_RAUMFELD_RC
435 bool "Raumfeld Controller"
440 config MACH_RAUMFELD_CONNECTOR
441 bool "Raumfeld Connector"
445 config MACH_RAUMFELD_SPEAKER
446 bool "Raumfeld Speaker"
451 bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
455 Say Y here if you intend to run this kernel on a
456 Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
457 SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
458 SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
461 config PXA_SHARPSL_DETECT_MACH_ID
462 bool "Detect machine ID at run-time in the decompressor"
463 depends on PXA_SHARPSL
465 Say Y here if you want the zImage decompressor to detect
466 the Zaurus machine ID at run-time. For latest kexec-based
467 boot loader, this is not necessary.
470 bool "Enable Sharp SL-5600 (Poodle) Support"
471 depends on PXA_SHARPSL
474 select PXA_HAVE_BOARD_IRQS
477 bool "Enable Sharp SL-C700 (Corgi) Support"
478 depends on PXA_SHARPSL
480 select PXA_SHARP_C7xx
483 bool "Enable Sharp SL-C750 (Shepherd) Support"
484 depends on PXA_SHARPSL
486 select PXA_SHARP_C7xx
489 bool "Enable Sharp SL-C760 (Husky) Support"
490 depends on PXA_SHARPSL
492 select PXA_SHARP_C7xx
495 bool "Enable Sharp SL-1000 (Akita) Support"
496 depends on PXA_SHARPSL
498 select PXA_SHARP_Cxx00
504 bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
505 depends on PXA_SHARPSL
507 select PXA_SHARP_Cxx00
510 bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
511 depends on PXA_SHARPSL
513 select PXA_SHARP_Cxx00
516 bool "Enable Sharp SL-6000x (Tosa) Support"
517 depends on PXA_SHARPSL
519 select PXA_HAVE_BOARD_IRQS
522 tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
526 This is a simple driver that is able to control
527 the state of built in bluetooth chip on tosa.
529 config TOSA_USE_EXT_KEYCODES
530 bool "Tosa keyboard: use extended keycodes"
534 Say Y here to enable the tosa keyboard driver to generate extended
535 (>= 127) keycodes. Be aware, that they can't be correctly interpreted
536 by either console keyboard driver or by Kdrive keybd driver.
538 Say Y only if you know, what you are doing!
541 bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
545 config ARCH_PXA_ESERIES
546 bool "PXA based Toshiba e-series PDAs"
548 select PXA_HAVE_BOARD_IRQS
553 depends on ARCH_PXA_ESERIES
555 Say Y here if you intend to run this kernel on a Toshiba
561 depends on ARCH_PXA_ESERIES
563 Say Y here if you intend to run this kernel on a Toshiba
569 depends on ARCH_PXA_ESERIES
571 Say Y here if you intend to run this kernel on a Toshiba
577 depends on ARCH_PXA_ESERIES
579 Say Y here if you intend to run this kernel on a Toshiba
585 depends on ARCH_PXA_ESERIES
587 Say Y here if you intend to run this kernel on a Toshiba
593 depends on ARCH_PXA_ESERIES
595 Say Y here if you intend to run this kernel on a Toshiba
599 bool "Zipit Z2 Handheld"
602 select PXA_HAVE_BOARD_IRQS
610 Select code specific to PXA21x/25x/26x variants
616 Select code specific to PXA27x variants
622 Select code specific to PXA26x (codename Dalhart)
628 Select code specific to PXA3xx variants
634 PXA300 (codename Monahans-L)
640 PXA310 (codename Monahans-LV)
646 PXA320 (codename Monahans-P)
652 PXA930 (codename Tavor-P)
658 PXA935 (codename Tavor-P65)
664 PXA950 (codename Tavor-PV2)
666 config PXA_SHARP_C7xx
670 Enable support for all Sharp C7xx models
672 config PXA_SHARP_Cxx00
676 Enable common support for Sharp Cxx00 models
681 select SHARPSL_PM_MAX1111
683 config SHARPSL_PM_MAX1111
685 depends on !CORGI_SSP_DEPRECATED
687 select SENSORS_MAX1111
689 config PXA_HAVE_BOARD_IRQS
692 config PXA_HAVE_ISA_IRQS