3 menu "Intel PXA2xx/PXA3xx Implementations"
6 bool "ARMv7 (PXA95x) based systems"
9 comment "Marvell Dev Platforms (sorted by hardware release time)"
11 bool "PXA95x Development Platform (aka TavorEVB III)"
15 bool "PXA955 Handheld Platform (aka SAARB)"
19 config PXA_V7_MACH_AUTO
21 depends on ARCH_PXA_V7
22 depends on !MACH_SAARB
26 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
29 bool "Intel DBPXA250 Development Platform (aka Lubbock)"
34 bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
43 config MACH_ZYLONITE300
44 bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
49 config MACH_ZYLONITE320
50 bool "PXA3xx Development Platform (aka Zylonite) PXA320"
55 bool "PXA3xx Form Factor Platform (aka Littleton)"
61 bool "PXA930 Evaluation Board (aka TavorEVB)"
66 bool "PXA930 Handheld Platform (aka SAAR)"
70 comment "Third Party Dev Platforms (sorted by vendor name)"
73 bool "Accelent Xscale IDP"
77 bool "Arcom/Eurotech VIPER SBC"
82 select PXA_HAVE_ISA_IRQS
85 config MACH_ARCOM_ZEUS
86 bool "Arcom/Eurotech ZEUS SBC"
89 select PXA_HAVE_ISA_IRQS
93 bool "Balloon 3 board"
98 bool "Enable Cogent CSB726 System On a Module"
102 Say Y here if you intend to run this kernel on a Cogent
103 CSB726 System On Module.
106 bool "Enable support for CSB701 baseboard"
107 depends on MACH_CSB726
110 bool "CompuLab CM-X255/CM-X270 modules"
111 select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
115 select MIGHT_HAVE_PCI
118 bool "CompuLab EM-x270 platform"
122 bool "CompuLab eXeda platform"
126 bool "CompuLab CM-X300 modules"
133 bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
138 bool "Gumstix XScale 255 boards"
141 Say Y here if you intend to run this kernel on
142 Basix, Connex, ws-200ax, ws-400ax systems
145 prompt "Gumstix Carrier/Expansion Board"
146 depends on ARCH_GUMSTIX
148 config GUMSTIX_AM200EPD
149 bool "Enable AM200EPD board support"
151 config GUMSTIX_AM300EPD
152 bool "Enable AM300EPD board support"
156 config MACH_INTELMOTE2
157 bool "Intel Mote 2 Platform"
161 config MACH_STARGATE2
162 bool "Intel Stargate 2 Platform"
167 bool "Iskratel Electronics XCEP"
171 select MTD_CFI_INTELEXT
176 PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
177 Tuned for usage in Libera instruments for particle accelerators.
180 bool "PXA based Keith und Koep Trizeps DIMM-Modules"
183 bool "Keith und Koep Trizeps4 DIMM-Module"
184 depends on TRIZEPS_PXA
185 select TRIZEPS_PCMCIA
188 config MACH_TRIZEPS4WL
189 bool "Keith und Koep Trizeps4-WL DIMM-Module"
190 depends on TRIZEPS_PXA
191 select TRIZEPS_PCMCIA
195 prompt "Select base board for Trizeps module"
196 depends on TRIZEPS_PXA
198 config MACH_TRIZEPS_CONXS
199 bool "ConXS Eval Board"
201 config MACH_TRIZEPS_UCONXS
202 bool "uConXS Eval Board"
204 config MACH_TRIZEPS_ANY
212 Generic option for Arcom Viper/Zeus PCMCIA
214 config TRIZEPS_PCMCIA
217 Enable PCMCIA support for Trizeps modules
219 config MACH_LOGICPD_PXA270
220 bool "LogicPD PXA270 Card Engine Development Platform"
225 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
229 config MACH_PCM990_BASEBOARD
230 bool "PHYTEC PCM-990 development board"
232 depends on MACH_PCM027
235 prompt "display on pcm990"
236 depends on MACH_PCM990_BASEBOARD
238 config PCM990_DISPLAY_SHARP
239 bool "sharp lq084v1dg21 stn display"
241 config PCM990_DISPLAY_NEC
242 bool "nec nl6448bc20_18d tft display"
244 config PCM990_DISPLAY_NONE
250 bool "Toradex Colibri PXA270"
253 config MACH_COLIBRI_PXA270_INCOME
254 bool "Income s.r.o. PXA270 SBC"
255 depends on MACH_COLIBRI
259 config MACH_COLIBRI300
260 bool "Toradex Colibri PXA300/310"
265 config MACH_COLIBRI320
266 bool "Toradex Colibri PXA320"
270 config MACH_COLIBRI_EVALBOARD
271 bool "Toradex Colibri Evaluation Carrier Board support"
272 depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
277 select HAVE_PATA_PLATFORM
279 PXA270 based Single Board Computer.
281 comment "End-user Products (sorted by vendor name)"
284 bool "HP iPAQ hx4700"
294 bool "HTC Himalaya Support"
298 bool "Enable HTC Magician Support"
304 bool "Mitac Mio A701 Support"
310 Say Y here if you intend to run this kernel on a
311 MIO A701. Currently there is only basic support
315 bool "Motorola EZX Platform"
321 bool "Motorola EZX A780"
326 bool "Motorola EZX E680"
330 config MACH_EZX_A1200
331 bool "Motorola EZX A1200"
336 bool "Motorola EZX A910"
341 bool "Motorola EZX E6"
346 bool "Motorola EZX E2"
351 bool "Nec Mobilepro 900/c"
355 bool "PXA based Palm PDAs"
362 bool "Palm Tungsten|E2"
364 depends on ARCH_PXA_PALM
367 Say Y here if you intend to run this kernel on a Palm Tungsten|E2
371 bool "Palm Tungsten|C"
373 depends on ARCH_PXA_PALM
376 Say Y here if you intend to run this kernel on a Palm Tungsten|C
380 bool "Palm Tungsten|T5"
382 depends on ARCH_PXA_PALM
387 Say Y here if you intend to run this kernel on a Palm Tungsten|T5
393 depends on ARCH_PXA_PALM
398 Say Y here if you intend to run this kernel on a Palm T|X
404 depends on ARCH_PXA_PALM
409 Say Y here if you intend to run this kernel on Palm Zire 72
413 bool "Palm LifeDrive"
415 depends on ARCH_PXA_PALM
420 Say Y here if you intend to run this kernel on a Palm LifeDrive
425 depends on ARCH_PXA_PALM
428 bool "Palm Centro 685 (GSM)"
430 depends on ARCH_PXA_PALM
436 Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
442 depends on ARCH_PXA_PALM
448 Say Y here if you intend to run this kernel on Palm Treo 680
451 config MACH_RAUMFELD_RC
452 bool "Raumfeld Controller"
458 config MACH_RAUMFELD_CONNECTOR
459 bool "Raumfeld Connector"
464 config MACH_RAUMFELD_SPEAKER
465 bool "Raumfeld Speaker"
471 bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
475 Say Y here if you intend to run this kernel on a
476 Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
477 SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
478 SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
481 config PXA_SHARPSL_DETECT_MACH_ID
482 bool "Detect machine ID at run-time in the decompressor"
483 depends on PXA_SHARPSL
485 Say Y here if you want the zImage decompressor to detect
486 the Zaurus machine ID at run-time. For latest kexec-based
487 boot loader, this is not necessary.
490 bool "Enable Sharp SL-5600 (Poodle) Support"
491 depends on PXA_SHARPSL
496 bool "Enable Sharp SL-C700 (Corgi) Support"
497 depends on PXA_SHARPSL
499 select PXA_SHARP_C7xx
502 bool "Enable Sharp SL-C750 (Shepherd) Support"
503 depends on PXA_SHARPSL
505 select PXA_SHARP_C7xx
508 bool "Enable Sharp SL-C760 (Husky) Support"
509 depends on PXA_SHARPSL
511 select PXA_SHARP_C7xx
514 bool "Enable Sharp SL-1000 (Akita) Support"
515 depends on PXA_SHARPSL
517 select PXA_SHARP_Cxx00
523 bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
524 depends on PXA_SHARPSL
526 select PXA_SHARP_Cxx00
529 bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
530 depends on PXA_SHARPSL
532 select PXA_SHARP_Cxx00
535 bool "Enable Sharp SL-6000x (Tosa) Support"
536 depends on PXA_SHARPSL
540 tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
544 This is a simple driver that is able to control
545 the state of built in bluetooth chip on tosa.
547 config TOSA_USE_EXT_KEYCODES
548 bool "Tosa keyboard: use extended keycodes"
552 Say Y here to enable the tosa keyboard driver to generate extended
553 (>= 127) keycodes. Be aware, that they can't be correctly interpreted
554 by either console keyboard driver or by Kdrive keybd driver.
556 Say Y only if you know, what you are doing!
559 bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
563 config ARCH_PXA_ESERIES
564 bool "PXA based Toshiba e-series PDAs"
572 depends on ARCH_PXA_ESERIES
574 Say Y here if you intend to run this kernel on a Toshiba
580 depends on ARCH_PXA_ESERIES
582 Say Y here if you intend to run this kernel on a Toshiba
588 depends on ARCH_PXA_ESERIES
590 Say Y here if you intend to run this kernel on a Toshiba
596 depends on ARCH_PXA_ESERIES
598 Say Y here if you intend to run this kernel on a Toshiba
604 depends on ARCH_PXA_ESERIES
606 Say Y here if you intend to run this kernel on a Toshiba
612 depends on ARCH_PXA_ESERIES
614 Say Y here if you intend to run this kernel on a Toshiba
618 bool "Zipit Z2 Handheld"
628 Select code specific to PXA21x/25x/26x variants
634 Select code specific to PXA27x variants
640 Select code specific to PXA26x (codename Dalhart)
646 Select code specific to PXA3xx variants
652 PXA300 (codename Monahans-L)
657 select PXA310_ULPI if USB_ULPI
659 PXA310 (codename Monahans-LV)
665 PXA320 (codename Monahans-P)
671 PXA930 (codename Tavor-P)
677 PXA935 (codename Tavor-P65)
683 Select code specific to PXA95x variants
689 PXA950 (codename MG1)
691 config PXA_SHARP_C7xx
695 Enable support for all Sharp C7xx models
697 config PXA_SHARP_Cxx00
701 Enable common support for Sharp Cxx00 models
706 select SHARPSL_PM_MAX1111
708 config SHARPSL_PM_MAX1111
713 select SENSORS_MAX1111
715 config PXA_HAVE_ISA_IRQS