3 menu "Intel PXA2xx/PXA3xx Implementations"
5 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
8 bool "Intel DBPXA250 Development Platform (aka Lubbock)"
11 select PXA_HAVE_BOARD_IRQS
14 bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
17 select PXA_HAVE_BOARD_IRQS
24 select PXA_HAVE_BOARD_IRQS
26 config MACH_ZYLONITE300
27 bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
32 config MACH_ZYLONITE320
33 bool "PXA3xx Development Platform (aka Zylonite) PXA320"
38 bool "PXA3xx Form Factor Platform (aka Littleton)"
45 bool "PXA930 Evaluation Board (aka TavorEVB)"
50 bool "PXA930 Handheld Platform (aka SAAR)"
54 comment "Third Party Dev Platforms (sorted by vendor name)"
57 bool "Accelent Xscale IDP"
61 bool "Arcom/Eurotech VIPER SBC"
66 select PXA_HAVE_BOARD_IRQS
67 select PXA_HAVE_ISA_IRQS
70 config MACH_ARCOM_ZEUS
71 bool "Arcom/Eurotech ZEUS SBC"
74 select PXA_HAVE_BOARD_IRQS
75 select PXA_HAVE_ISA_IRQS
79 bool "Balloon 3 board"
82 select PXA_HAVE_BOARD_IRQS
85 bool "Enable Cogent CSB726 System On a Module"
89 Say Y here if you intend to run this kernel on a Cogent
90 CSB726 System On Module.
93 bool "Enable support for CSB701 baseboard"
94 depends on MACH_CSB726
97 bool "CompuLab CM-X255/CM-X270 modules"
104 bool "CompuLab EM-x270 platform"
108 bool "CompuLab eXeda platform"
112 bool "CompuLab CM-X300 modules"
119 bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
124 bool "Gumstix XScale 255 boards"
127 Say Y here if you intend to run this kernel on
128 Basix, Connex, ws-200ax, ws-400ax systems
131 prompt "Gumstix Carrier/Expansion Board"
132 depends on ARCH_GUMSTIX
134 config GUMSTIX_AM200EPD
135 bool "Enable AM200EPD board support"
137 config GUMSTIX_AM300EPD
138 bool "Enable AM300EPD board support"
142 config MACH_INTELMOTE2
143 bool "Intel Mote 2 Platform"
146 select PXA_HAVE_BOARD_IRQS
148 config MACH_STARGATE2
149 bool "Intel Stargate 2 Platform"
152 select PXA_HAVE_BOARD_IRQS
155 bool "Iskratel Electronics XCEP"
158 select MTD_PARTITIONS
160 select MTD_CFI_INTELEXT
166 PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
167 Tuned for usage in Libera instruments for particle accelerators.
170 bool "PXA based Keith und Koep Trizeps DIMM-Modules"
173 bool "Keith und Koep Trizeps4 DIMM-Module"
174 depends on TRIZEPS_PXA
175 select TRIZEPS_PCMCIA
178 config MACH_TRIZEPS4WL
179 bool "Keith und Koep Trizeps4-WL DIMM-Module"
180 depends on TRIZEPS_PXA
181 select TRIZEPS_PCMCIA
186 prompt "Select base board for Trizeps module"
187 depends on TRIZEPS_PXA
189 config MACH_TRIZEPS_CONXS
190 bool "ConXS Eval Board"
192 config MACH_TRIZEPS_UCONXS
193 bool "uConXS Eval Board"
195 config MACH_TRIZEPS_ANY
203 Generic option for Arcom Viper/Zeus PCMCIA
205 config TRIZEPS_PCMCIA
208 Enable PCMCIA support for Trizeps modules
210 config MACH_LOGICPD_PXA270
211 bool "LogicPD PXA270 Card Engine Development Platform"
214 select PXA_HAVE_BOARD_IRQS
217 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
221 select PXA_HAVE_BOARD_IRQS
223 config MACH_PCM990_BASEBOARD
224 bool "PHYTEC PCM-990 development board"
226 depends on MACH_PCM027
229 prompt "display on pcm990"
230 depends on MACH_PCM990_BASEBOARD
232 config PCM990_DISPLAY_SHARP
233 bool "sharp lq084v1dg21 stn display"
235 config PCM990_DISPLAY_NEC
236 bool "nec nl6448bc20_18d tft display"
238 config PCM990_DISPLAY_NONE
244 bool "Toradex Colibri PXA270"
247 config MACH_COLIBRI300
248 bool "Toradex Colibri PXA300/310"
253 config MACH_COLIBRI320
254 bool "Toradex Colibri PXA320"
258 comment "End-user Products (sorted by vendor name)"
261 bool "HP iPAQ hx4700"
266 select PXA_HAVE_BOARD_IRQS
273 bool "HTC Himalaya Support"
277 bool "Enable HTC Magician Support"
282 select PXA_HAVE_BOARD_IRQS
285 bool "Mitac Mio A701 Support"
291 Say Y here if you intend to run this kernel on a
292 MIO A701. Currently there is only basic support
296 bool "Motorola EZX Platform"
300 select PXA_HAVE_BOARD_IRQS
303 bool "Motorola EZX A780"
308 bool "Motorola EZX E680"
312 config MACH_EZX_A1200
313 bool "Motorola EZX A1200"
318 bool "Motorola EZX A910"
323 bool "Motorola EZX E6"
328 bool "Motorola EZX E2"
333 bool "Nec Mobilepro 900/c"
337 bool "PXA based Palm PDAs"
341 bool "Palm Tungsten|E2"
343 depends on ARCH_PXA_PALM
346 Say Y here if you intend to run this kernel on a Palm Tungsten|E2
350 bool "Palm Tungsten|C"
352 depends on ARCH_PXA_PALM
355 Say Y here if you intend to run this kernel on a Palm Tungsten|C
359 bool "Palm Tungsten|T5"
361 depends on ARCH_PXA_PALM
365 Say Y here if you intend to run this kernel on a Palm Tungsten|T5
371 depends on ARCH_PXA_PALM
375 Say Y here if you intend to run this kernel on a Palm T|X
381 depends on ARCH_PXA_PALM
385 Say Y here if you intend to run this kernel on Palm Zire 72
389 bool "Palm LifeDrive"
391 depends on ARCH_PXA_PALM
395 Say Y here if you intend to run this kernel on a Palm LifeDrive
400 depends on ARCH_PXA_PALM
403 bool "Palm Centro 685 (GSM)"
405 depends on ARCH_PXA_PALM
410 Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
416 depends on ARCH_PXA_PALM
421 Say Y here if you intend to run this kernel on Palm Treo 680
424 config MACH_RAUMFELD_RC
425 bool "Raumfeld Controller"
430 config MACH_RAUMFELD_CONNECTOR
431 bool "Raumfeld Connector"
436 config MACH_RAUMFELD_SPEAKER
437 bool "Raumfeld Speaker"
443 bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
447 Say Y here if you intend to run this kernel on a
448 Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
449 SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
450 SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
456 select SHARPSL_PM_MAX1111
458 config SHARPSL_PM_MAX1111
460 depends on !CORGI_SSP_DEPRECATED
462 select SENSORS_MAX1111
464 config CORGI_SSP_DEPRECATED
467 select PXA_SSP_LEGACY
469 This option will include corgi_ssp.c and corgi_lcd.c
470 that corgi_ts.c and other legacy drivers (corgi_bl.c
471 and sharpsl_pm.c) may depend on.
474 bool "Enable Sharp SL-5600 (Poodle) Support"
475 depends on PXA_SHARPSL
479 select PXA_HAVE_BOARD_IRQS
482 bool "Enable Sharp SL-C700 (Corgi) Support"
483 depends on PXA_SHARPSL
485 select PXA_SHARP_C7xx
488 bool "Enable Sharp SL-C750 (Shepherd) Support"
489 depends on PXA_SHARPSL
491 select PXA_SHARP_C7xx
494 bool "Enable Sharp SL-C760 (Husky) Support"
495 depends on PXA_SHARPSL
497 select PXA_SHARP_C7xx
500 bool "Enable Sharp SL-1000 (Akita) Support"
501 depends on PXA_SHARPSL
503 select PXA_SHARP_Cxx00
509 bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
510 depends on PXA_SHARPSL
512 select PXA_SHARP_Cxx00
515 bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
516 depends on PXA_SHARPSL
518 select PXA_SHARP_Cxx00
521 bool "Enable Sharp SL-6000x (Tosa) Support"
522 depends on PXA_SHARPSL
524 select PXA_HAVE_BOARD_IRQS
527 bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
531 config ARCH_PXA_ESERIES
532 bool "PXA based Toshiba e-series PDAs"
534 select PXA_HAVE_BOARD_IRQS
539 depends on ARCH_PXA_ESERIES
541 Say Y here if you intend to run this kernel on a Toshiba
547 depends on ARCH_PXA_ESERIES
549 Say Y here if you intend to run this kernel on a Toshiba
555 depends on ARCH_PXA_ESERIES
557 Say Y here if you intend to run this kernel on a Toshiba
563 depends on ARCH_PXA_ESERIES
565 Say Y here if you intend to run this kernel on a Toshiba
571 depends on ARCH_PXA_ESERIES
573 Say Y here if you intend to run this kernel on a Toshiba
579 depends on ARCH_PXA_ESERIES
581 Say Y here if you intend to run this kernel on a Toshiba
590 Select code specific to PXA21x/25x/26x variants
596 Select code specific to PXA27x variants
602 Select code specific to PXA26x (codename Dalhart)
608 Select code specific to PXA3xx variants
614 PXA300 (codename Monahans-L)
620 PXA310 (codename Monahans-LV)
626 PXA320 (codename Monahans-P)
632 PXA930 (codename Tavor-P)
638 PXA935 (codename Tavor-P65)
644 PXA950 (codename Tavor-PV2)
646 config PXA_SHARP_C7xx
651 Enable support for all Sharp C7xx models
653 config PXA_SHARP_Cxx00
658 Enable common support for Sharp Cxx00 models
663 Enable support for PXA2xx SSP ports
665 config PXA_SSP_LEGACY
668 Support of legacy SSP API
671 tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
675 This is a simple driver that is able to control
676 the state of built in bluetooth chip on tosa.
678 config PXA_HAVE_BOARD_IRQS
681 config PXA_HAVE_ISA_IRQS