arch/arm/mach-omap2/usb-host.c

   1 /*
   2  * usb-host.c - OMAP USB Host
   3  *
   4  * This file will contain the board specific details for the
   5  * Synopsys EHCI/OHCI host controller on OMAP3430 and onwards
   6  *
   7  * Copyright (C) 2007-2011 Texas Instruments
   8  * Author: Vikram Pandita <vikram.pandita@ti.com>
   9  * Author: Keshava Munegowda <keshava_mgowda@ti.com>
  10  *
  11  * Generalization by:
  12  * Felipe Balbi <balbi@ti.com>
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License version 2 as
  16  * published by the Free Software Foundation.
  17  */
  18
  19 #include <linux/types.h>
  20 #include <linux/errno.h>
  21 #include <linux/delay.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/slab.h>
  24 #include <linux/dma-mapping.h>
  25
  26 #include <asm/io.h>
  27
  28 #include <mach/hardware.h>
  29 #include <mach/irqs.h>
  30 #include <plat/usb.h>
  31
  32 #include "mux.h"
  33
  34 #ifdef CONFIG_MFD_OMAP_USB_HOST
  35
  36 #define OMAP_USBHS_DEVICE       "usbhs-omap"
  37
  38 static struct resource usbhs_resources[] = {
  39         {
  40                 .name   = "uhh",
  41                 .flags  = IORESOURCE_MEM,
  42         },
  43         {
  44                 .name   = "tll",
  45                 .flags  = IORESOURCE_MEM,
  46         },
  47         {
  48                 .name   = "ehci",
  49                 .flags  = IORESOURCE_MEM,
  50         },
  51         {
  52                 .name   = "ehci-irq",
  53                 .flags  = IORESOURCE_IRQ,
  54         },
  55         {
  56                 .name   = "ohci",
  57                 .flags  = IORESOURCE_MEM,
  58         },
  59         {
  60                 .name   = "ohci-irq",
  61                 .flags  = IORESOURCE_IRQ,
  62         }
  63 };
  64
  65 static struct platform_device usbhs_device = {
  66         .name           = OMAP_USBHS_DEVICE,
  67         .id             = 0,
  68         .num_resources  = ARRAY_SIZE(usbhs_resources),
  69         .resource       = usbhs_resources,
  70 };
  71
  72 static struct usbhs_omap_platform_data          usbhs_data;
  73 static struct ehci_hcd_omap_platform_data       ehci_data;
  74 static struct ohci_hcd_omap_platform_data       ohci_data;
  75
  76 /* MUX settings for EHCI pins */
  77 /*
  78  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
  79  */
  80 static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
  81 {
  82         switch (port_mode[0]) {
  83         case OMAP_EHCI_PORT_MODE_PHY:
  84                 omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
  85                 omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
  86                 omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
  87                 omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
  88                 omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
  89                 omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
  90                 omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
  91                 omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
  92                 omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
  93                 omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
  94                 omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
  95                 omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
  96                 break;
  97         case OMAP_EHCI_PORT_MODE_TLL:
  98                 omap_mux_init_signal("hsusb1_tll_stp",
  99                         OMAP_PIN_INPUT_PULLUP);
 100                 omap_mux_init_signal("hsusb1_tll_clk",
 101                         OMAP_PIN_INPUT_PULLDOWN);
 102                 omap_mux_init_signal("hsusb1_tll_dir",
 103                         OMAP_PIN_INPUT_PULLDOWN);
 104                 omap_mux_init_signal("hsusb1_tll_nxt",
 105                         OMAP_PIN_INPUT_PULLDOWN);
 106                 omap_mux_init_signal("hsusb1_tll_data0",
 107                         OMAP_PIN_INPUT_PULLDOWN);
 108                 omap_mux_init_signal("hsusb1_tll_data1",
 109                         OMAP_PIN_INPUT_PULLDOWN);
 110                 omap_mux_init_signal("hsusb1_tll_data2",
 111                         OMAP_PIN_INPUT_PULLDOWN);
 112                 omap_mux_init_signal("hsusb1_tll_data3",
 113                         OMAP_PIN_INPUT_PULLDOWN);
 114                 omap_mux_init_signal("hsusb1_tll_data4",
 115                         OMAP_PIN_INPUT_PULLDOWN);
 116                 omap_mux_init_signal("hsusb1_tll_data5",
 117                         OMAP_PIN_INPUT_PULLDOWN);
 118                 omap_mux_init_signal("hsusb1_tll_data6",
 119                         OMAP_PIN_INPUT_PULLDOWN);
 120                 omap_mux_init_signal("hsusb1_tll_data7",
 121                         OMAP_PIN_INPUT_PULLDOWN);
 122                 break;
 123         case OMAP_USBHS_PORT_MODE_UNUSED:
 124                 /* FALLTHROUGH */
 125         default:
 126                 break;
 127         }
 128
 129         switch (port_mode[1]) {
 130         case OMAP_EHCI_PORT_MODE_PHY:
 131                 omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
 132                 omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
 133                 omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
 134                 omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
 135                 omap_mux_init_signal("hsusb2_data0",
 136                         OMAP_PIN_INPUT_PULLDOWN);
 137                 omap_mux_init_signal("hsusb2_data1",
 138                         OMAP_PIN_INPUT_PULLDOWN);
 139                 omap_mux_init_signal("hsusb2_data2",
 140                         OMAP_PIN_INPUT_PULLDOWN);
 141                 omap_mux_init_signal("hsusb2_data3",
 142                         OMAP_PIN_INPUT_PULLDOWN);
 143                 omap_mux_init_signal("hsusb2_data4",
 144                         OMAP_PIN_INPUT_PULLDOWN);
 145                 omap_mux_init_signal("hsusb2_data5",
 146                         OMAP_PIN_INPUT_PULLDOWN);
 147                 omap_mux_init_signal("hsusb2_data6",
 148                         OMAP_PIN_INPUT_PULLDOWN);
 149                 omap_mux_init_signal("hsusb2_data7",
 150                         OMAP_PIN_INPUT_PULLDOWN);
 151                 break;
 152         case OMAP_EHCI_PORT_MODE_TLL:
 153                 omap_mux_init_signal("hsusb2_tll_stp",
 154                         OMAP_PIN_INPUT_PULLUP);
 155                 omap_mux_init_signal("hsusb2_tll_clk",
 156                         OMAP_PIN_INPUT_PULLDOWN);
 157                 omap_mux_init_signal("hsusb2_tll_dir",
 158                         OMAP_PIN_INPUT_PULLDOWN);
 159                 omap_mux_init_signal("hsusb2_tll_nxt",
 160                         OMAP_PIN_INPUT_PULLDOWN);
 161                 omap_mux_init_signal("hsusb2_tll_data0",
 162                         OMAP_PIN_INPUT_PULLDOWN);
 163                 omap_mux_init_signal("hsusb2_tll_data1",
 164                         OMAP_PIN_INPUT_PULLDOWN);
 165                 omap_mux_init_signal("hsusb2_tll_data2",
 166                         OMAP_PIN_INPUT_PULLDOWN);
 167                 omap_mux_init_signal("hsusb2_tll_data3",
 168                         OMAP_PIN_INPUT_PULLDOWN);
 169                 omap_mux_init_signal("hsusb2_tll_data4",
 170                         OMAP_PIN_INPUT_PULLDOWN);
 171                 omap_mux_init_signal("hsusb2_tll_data5",
 172                         OMAP_PIN_INPUT_PULLDOWN);
 173                 omap_mux_init_signal("hsusb2_tll_data6",
 174                         OMAP_PIN_INPUT_PULLDOWN);
 175                 omap_mux_init_signal("hsusb2_tll_data7",
 176                         OMAP_PIN_INPUT_PULLDOWN);
 177                 break;
 178         case OMAP_USBHS_PORT_MODE_UNUSED:
 179                 /* FALLTHROUGH */
 180         default:
 181                 break;
 182         }
 183
 184         switch (port_mode[2]) {
 185         case OMAP_EHCI_PORT_MODE_PHY:
 186                 printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
 187                 break;
 188         case OMAP_EHCI_PORT_MODE_TLL:
 189                 omap_mux_init_signal("hsusb3_tll_stp",
 190                         OMAP_PIN_INPUT_PULLUP);
 191                 omap_mux_init_signal("hsusb3_tll_clk",
 192                         OMAP_PIN_INPUT_PULLDOWN);
 193                 omap_mux_init_signal("hsusb3_tll_dir",
 194                         OMAP_PIN_INPUT_PULLDOWN);
 195                 omap_mux_init_signal("hsusb3_tll_nxt",
 196                         OMAP_PIN_INPUT_PULLDOWN);
 197                 omap_mux_init_signal("hsusb3_tll_data0",
 198                         OMAP_PIN_INPUT_PULLDOWN);
 199                 omap_mux_init_signal("hsusb3_tll_data1",
 200                         OMAP_PIN_INPUT_PULLDOWN);
 201                 omap_mux_init_signal("hsusb3_tll_data2",
 202                         OMAP_PIN_INPUT_PULLDOWN);
 203                 omap_mux_init_signal("hsusb3_tll_data3",
 204                         OMAP_PIN_INPUT_PULLDOWN);
 205                 omap_mux_init_signal("hsusb3_tll_data4",
 206                         OMAP_PIN_INPUT_PULLDOWN);
 207                 omap_mux_init_signal("hsusb3_tll_data5",
 208                         OMAP_PIN_INPUT_PULLDOWN);
 209                 omap_mux_init_signal("hsusb3_tll_data6",
 210                         OMAP_PIN_INPUT_PULLDOWN);
 211                 omap_mux_init_signal("hsusb3_tll_data7",
 212                         OMAP_PIN_INPUT_PULLDOWN);
 213                 break;
 214         case OMAP_USBHS_PORT_MODE_UNUSED:
 215                 /* FALLTHROUGH */
 216         default:
 217                 break;
 218         }
 219
 220         return;
 221 }
 222
 223 static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 224 {
 225         switch (port_mode[0]) {
 226         case OMAP_EHCI_PORT_MODE_PHY:
 227                 omap_mux_init_signal("usbb1_ulpiphy_stp",
 228                         OMAP_PIN_OUTPUT);
 229                 omap_mux_init_signal("usbb1_ulpiphy_clk",
 230                         OMAP_PIN_INPUT_PULLDOWN);
 231                 omap_mux_init_signal("usbb1_ulpiphy_dir",
 232                         OMAP_PIN_INPUT_PULLDOWN);
 233                 omap_mux_init_signal("usbb1_ulpiphy_nxt",
 234                         OMAP_PIN_INPUT_PULLDOWN);
 235                 omap_mux_init_signal("usbb1_ulpiphy_dat0",
 236                         OMAP_PIN_INPUT_PULLDOWN);
 237                 omap_mux_init_signal("usbb1_ulpiphy_dat1",
 238                         OMAP_PIN_INPUT_PULLDOWN);
 239                 omap_mux_init_signal("usbb1_ulpiphy_dat2",
 240                         OMAP_PIN_INPUT_PULLDOWN);
 241                 omap_mux_init_signal("usbb1_ulpiphy_dat3",
 242                         OMAP_PIN_INPUT_PULLDOWN);
 243                 omap_mux_init_signal("usbb1_ulpiphy_dat4",
 244                         OMAP_PIN_INPUT_PULLDOWN);
 245                 omap_mux_init_signal("usbb1_ulpiphy_dat5",
 246                         OMAP_PIN_INPUT_PULLDOWN);
 247                 omap_mux_init_signal("usbb1_ulpiphy_dat6",
 248                         OMAP_PIN_INPUT_PULLDOWN);
 249                 omap_mux_init_signal("usbb1_ulpiphy_dat7",
 250                         OMAP_PIN_INPUT_PULLDOWN);
 251                         break;
 252         case OMAP_EHCI_PORT_MODE_TLL:
 253                 omap_mux_init_signal("usbb1_ulpitll_stp",
 254                         OMAP_PIN_INPUT_PULLUP);
 255                 omap_mux_init_signal("usbb1_ulpitll_clk",
 256                         OMAP_PIN_INPUT_PULLDOWN);
 257                 omap_mux_init_signal("usbb1_ulpitll_dir",
 258                         OMAP_PIN_INPUT_PULLDOWN);
 259                 omap_mux_init_signal("usbb1_ulpitll_nxt",
 260                         OMAP_PIN_INPUT_PULLDOWN);
 261                 omap_mux_init_signal("usbb1_ulpitll_dat0",
 262                         OMAP_PIN_INPUT_PULLDOWN);
 263                 omap_mux_init_signal("usbb1_ulpitll_dat1",
 264                         OMAP_PIN_INPUT_PULLDOWN);
 265                 omap_mux_init_signal("usbb1_ulpitll_dat2",
 266                         OMAP_PIN_INPUT_PULLDOWN);
 267                 omap_mux_init_signal("usbb1_ulpitll_dat3",
 268                         OMAP_PIN_INPUT_PULLDOWN);
 269                 omap_mux_init_signal("usbb1_ulpitll_dat4",
 270                         OMAP_PIN_INPUT_PULLDOWN);
 271                 omap_mux_init_signal("usbb1_ulpitll_dat5",
 272                         OMAP_PIN_INPUT_PULLDOWN);
 273                 omap_mux_init_signal("usbb1_ulpitll_dat6",
 274                         OMAP_PIN_INPUT_PULLDOWN);
 275                 omap_mux_init_signal("usbb1_ulpitll_dat7",
 276                         OMAP_PIN_INPUT_PULLDOWN);
 277                         break;
 278         case OMAP_USBHS_PORT_MODE_UNUSED:
 279         default:
 280                         break;
 281         }
 282         switch (port_mode[1]) {
 283         case OMAP_EHCI_PORT_MODE_PHY:
 284                 omap_mux_init_signal("usbb2_ulpiphy_stp",
 285                         OMAP_PIN_OUTPUT);
 286                 omap_mux_init_signal("usbb2_ulpiphy_clk",
 287                         OMAP_PIN_INPUT_PULLDOWN);
 288                 omap_mux_init_signal("usbb2_ulpiphy_dir",
 289                         OMAP_PIN_INPUT_PULLDOWN);
 290                 omap_mux_init_signal("usbb2_ulpiphy_nxt",
 291                         OMAP_PIN_INPUT_PULLDOWN);
 292                 omap_mux_init_signal("usbb2_ulpiphy_dat0",
 293                         OMAP_PIN_INPUT_PULLDOWN);
 294                 omap_mux_init_signal("usbb2_ulpiphy_dat1",
 295                         OMAP_PIN_INPUT_PULLDOWN);
 296                 omap_mux_init_signal("usbb2_ulpiphy_dat2",
 297                         OMAP_PIN_INPUT_PULLDOWN);
 298                 omap_mux_init_signal("usbb2_ulpiphy_dat3",
 299                         OMAP_PIN_INPUT_PULLDOWN);
 300                 omap_mux_init_signal("usbb2_ulpiphy_dat4",
 301                         OMAP_PIN_INPUT_PULLDOWN);
 302                 omap_mux_init_signal("usbb2_ulpiphy_dat5",
 303                         OMAP_PIN_INPUT_PULLDOWN);
 304                 omap_mux_init_signal("usbb2_ulpiphy_dat6",
 305                         OMAP_PIN_INPUT_PULLDOWN);
 306                 omap_mux_init_signal("usbb2_ulpiphy_dat7",
 307                         OMAP_PIN_INPUT_PULLDOWN);
 308                         break;
 309         case OMAP_EHCI_PORT_MODE_TLL:
 310                 omap_mux_init_signal("usbb2_ulpitll_stp",
 311                         OMAP_PIN_INPUT_PULLUP);
 312                 omap_mux_init_signal("usbb2_ulpitll_clk",
 313                         OMAP_PIN_INPUT_PULLDOWN);
 314                 omap_mux_init_signal("usbb2_ulpitll_dir",
 315                         OMAP_PIN_INPUT_PULLDOWN);
 316                 omap_mux_init_signal("usbb2_ulpitll_nxt",
 317                         OMAP_PIN_INPUT_PULLDOWN);
 318                 omap_mux_init_signal("usbb2_ulpitll_dat0",
 319                         OMAP_PIN_INPUT_PULLDOWN);
 320                 omap_mux_init_signal("usbb2_ulpitll_dat1",
 321                         OMAP_PIN_INPUT_PULLDOWN);
 322                 omap_mux_init_signal("usbb2_ulpitll_dat2",
 323                         OMAP_PIN_INPUT_PULLDOWN);
 324                 omap_mux_init_signal("usbb2_ulpitll_dat3",
 325                         OMAP_PIN_INPUT_PULLDOWN);
 326                 omap_mux_init_signal("usbb2_ulpitll_dat4",
 327                         OMAP_PIN_INPUT_PULLDOWN);
 328                 omap_mux_init_signal("usbb2_ulpitll_dat5",
 329                         OMAP_PIN_INPUT_PULLDOWN);
 330                 omap_mux_init_signal("usbb2_ulpitll_dat6",
 331                         OMAP_PIN_INPUT_PULLDOWN);
 332                 omap_mux_init_signal("usbb2_ulpitll_dat7",
 333                         OMAP_PIN_INPUT_PULLDOWN);
 334                         break;
 335         case OMAP_USBHS_PORT_MODE_UNUSED:
 336         default:
 337                         break;
 338         }
 339 }
 340
 341 static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 342 {
 343         switch (port_mode[0]) {
 344         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 345         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 346         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 347         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 348                 omap_mux_init_signal("mm1_rxdp",
 349                         OMAP_PIN_INPUT_PULLDOWN);
 350                 omap_mux_init_signal("mm1_rxdm",
 351                         OMAP_PIN_INPUT_PULLDOWN);
 352                 /* FALLTHROUGH */
 353         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 354         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 355                 omap_mux_init_signal("mm1_rxrcv",
 356                         OMAP_PIN_INPUT_PULLDOWN);
 357                 /* FALLTHROUGH */
 358         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 359         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 360                 omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT);
 361                 /* FALLTHROUGH */
 362         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 363         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 364                 omap_mux_init_signal("mm1_txse0",
 365                         OMAP_PIN_INPUT_PULLDOWN);
 366                 omap_mux_init_signal("mm1_txdat",
 367                         OMAP_PIN_INPUT_PULLDOWN);
 368                 break;
 369         case OMAP_USBHS_PORT_MODE_UNUSED:
 370                 /* FALLTHROUGH */
 371         default:
 372                 break;
 373         }
 374         switch (port_mode[1]) {
 375         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 376         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 377         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 378         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 379                 omap_mux_init_signal("mm2_rxdp",
 380                         OMAP_PIN_INPUT_PULLDOWN);
 381                 omap_mux_init_signal("mm2_rxdm",
 382                         OMAP_PIN_INPUT_PULLDOWN);
 383                 /* FALLTHROUGH */
 384         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 385         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 386                 omap_mux_init_signal("mm2_rxrcv",
 387                         OMAP_PIN_INPUT_PULLDOWN);
 388                 /* FALLTHROUGH */
 389         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 390         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 391                 omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT);
 392                 /* FALLTHROUGH */
 393         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 394         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 395                 omap_mux_init_signal("mm2_txse0",
 396                         OMAP_PIN_INPUT_PULLDOWN);
 397                 omap_mux_init_signal("mm2_txdat",
 398                         OMAP_PIN_INPUT_PULLDOWN);
 399                 break;
 400         case OMAP_USBHS_PORT_MODE_UNUSED:
 401                 /* FALLTHROUGH */
 402         default:
 403                 break;
 404         }
 405         switch (port_mode[2]) {
 406         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 407         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 408         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 409         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 410                 omap_mux_init_signal("mm3_rxdp",
 411                         OMAP_PIN_INPUT_PULLDOWN);
 412                 omap_mux_init_signal("mm3_rxdm",
 413                         OMAP_PIN_INPUT_PULLDOWN);
 414                 /* FALLTHROUGH */
 415         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 416         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 417                 omap_mux_init_signal("mm3_rxrcv",
 418                         OMAP_PIN_INPUT_PULLDOWN);
 419                 /* FALLTHROUGH */
 420         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 421         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 422                 omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT);
 423                 /* FALLTHROUGH */
 424         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 425         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 426                 omap_mux_init_signal("mm3_txse0",
 427                         OMAP_PIN_INPUT_PULLDOWN);
 428                 omap_mux_init_signal("mm3_txdat",
 429                         OMAP_PIN_INPUT_PULLDOWN);
 430                 break;
 431         case OMAP_USBHS_PORT_MODE_UNUSED:
 432                 /* FALLTHROUGH */
 433         default:
 434                 break;
 435         }
 436 }
 437
 438 static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 439 {
 440         switch (port_mode[0]) {
 441         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 442         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 443         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 444         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 445                 omap_mux_init_signal("usbb1_mm_rxdp",
 446                         OMAP_PIN_INPUT_PULLDOWN);
 447                 omap_mux_init_signal("usbb1_mm_rxdm",
 448                         OMAP_PIN_INPUT_PULLDOWN);
 449
 450         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 451         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 452                 omap_mux_init_signal("usbb1_mm_rxrcv",
 453                         OMAP_PIN_INPUT_PULLDOWN);
 454
 455         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 456         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 457                 omap_mux_init_signal("usbb1_mm_txen",
 458                         OMAP_PIN_INPUT_PULLDOWN);
 459
 460
 461         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 462         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 463                 omap_mux_init_signal("usbb1_mm_txdat",
 464                         OMAP_PIN_INPUT_PULLDOWN);
 465                 omap_mux_init_signal("usbb1_mm_txse0",
 466                         OMAP_PIN_INPUT_PULLDOWN);
 467                 break;
 468
 469         case OMAP_USBHS_PORT_MODE_UNUSED:
 470         default:
 471                 break;
 472         }
 473
 474         switch (port_mode[1]) {
 475         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 476         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 477         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 478         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 479                 omap_mux_init_signal("usbb2_mm_rxdp",
 480                         OMAP_PIN_INPUT_PULLDOWN);
 481                 omap_mux_init_signal("usbb2_mm_rxdm",
 482                         OMAP_PIN_INPUT_PULLDOWN);
 483
 484         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 485         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 486                 omap_mux_init_signal("usbb2_mm_rxrcv",
 487                         OMAP_PIN_INPUT_PULLDOWN);
 488
 489         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 490         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 491                 omap_mux_init_signal("usbb2_mm_txen",
 492                         OMAP_PIN_INPUT_PULLDOWN);
 493
 494
 495         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 496         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 497                 omap_mux_init_signal("usbb2_mm_txdat",
 498                         OMAP_PIN_INPUT_PULLDOWN);
 499                 omap_mux_init_signal("usbb2_mm_txse0",
 500                         OMAP_PIN_INPUT_PULLDOWN);
 501                 break;
 502
 503         case OMAP_USBHS_PORT_MODE_UNUSED:
 504         default:
 505                 break;
 506         }
 507 }
 508
 509 void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 510 {
 511         int     i;
 512
 513         for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
 514                 usbhs_data.port_mode[i] = pdata->port_mode[i];
 515                 ohci_data.port_mode[i] = pdata->port_mode[i];
 516                 ehci_data.port_mode[i] = pdata->port_mode[i];
 517                 ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i];
 518                 ehci_data.regulator[i] = pdata->regulator[i];
 519         }
 520         ehci_data.phy_reset = pdata->phy_reset;
 521         ohci_data.es2_compatibility = pdata->es2_compatibility;
 522         usbhs_data.ehci_data = &ehci_data;
 523         usbhs_data.ohci_data = &ohci_data;
 524
 525         if (cpu_is_omap34xx()) {
 526                 usbhs_resources[0].start = OMAP34XX_UHH_CONFIG_BASE;
 527                 usbhs_resources[0].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1;
 528                 usbhs_resources[1].start = OMAP34XX_USBTLL_BASE;
 529                 usbhs_resources[1].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1;
 530                 usbhs_resources[2].start        = OMAP34XX_EHCI_BASE;
 531                 usbhs_resources[2].end  = OMAP34XX_EHCI_BASE + SZ_1K - 1;
 532                 usbhs_resources[3].start = INT_34XX_EHCI_IRQ;
 533                 usbhs_resources[4].start        = OMAP34XX_OHCI_BASE;
 534                 usbhs_resources[4].end  = OMAP34XX_OHCI_BASE + SZ_1K - 1;
 535                 usbhs_resources[5].start = INT_34XX_OHCI_IRQ;
 536                 setup_ehci_io_mux(pdata->port_mode);
 537                 setup_ohci_io_mux(pdata->port_mode);
 538         } else if (cpu_is_omap44xx()) {
 539                 usbhs_resources[0].start = OMAP44XX_UHH_CONFIG_BASE;
 540                 usbhs_resources[0].end = OMAP44XX_UHH_CONFIG_BASE + SZ_1K - 1;
 541                 usbhs_resources[1].start = OMAP44XX_USBTLL_BASE;
 542                 usbhs_resources[1].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1;
 543                 usbhs_resources[2].start = OMAP44XX_HSUSB_EHCI_BASE;
 544                 usbhs_resources[2].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1;
 545                 usbhs_resources[3].start = OMAP44XX_IRQ_EHCI;
 546                 usbhs_resources[4].start = OMAP44XX_HSUSB_OHCI_BASE;
 547                 usbhs_resources[4].end = OMAP44XX_HSUSB_OHCI_BASE + SZ_1K - 1;
 548                 usbhs_resources[5].start = OMAP44XX_IRQ_OHCI;
 549                 setup_4430ehci_io_mux(pdata->port_mode);
 550                 setup_4430ohci_io_mux(pdata->port_mode);
 551         }
 552
 553         if (platform_device_add_data(&usbhs_device,
 554                                 &usbhs_data, sizeof(usbhs_data)) < 0) {
 555                 printk(KERN_ERR "USBHS platform_device_add_data failed\n");
 556                 goto init_end;
 557         }
 558
 559         if (platform_device_register(&usbhs_device) < 0)
 560                 printk(KERN_ERR "USBHS platform_device_register failed\n");
 561
 562 init_end:
 563         return;
 564 }
 565
 566 #else
 567
 568 void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 569 {
 570 }
 571
 572 #endif
 573
 574