2 * Copyright (C) 2009 Texas Instruments Inc.
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
9 #include <linux/kernel.h>
10 #include <linux/init.h>
11 #include <linux/platform_device.h>
12 #include <linux/input.h>
13 #include <linux/gpio.h>
15 #include <asm/mach-types.h>
16 #include <asm/mach/arch.h>
18 #include <plat/common.h>
19 #include <plat/board.h>
20 #include <plat/gpmc-smc91x.h>
24 #include <mach/board-zoom.h>
27 #include "sdram-hynix-h8mbx00u0mer-0em.h"
29 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
31 static struct omap_smc91x_platform_data board_smc91x_data = {
33 .flags = GPMC_MUX_ADD_DATA | IORESOURCE_IRQ_LOWLEVEL,
36 static void __init board_smc91x_init(void)
38 board_smc91x_data.gpio_irq = 158;
39 gpmc_smc91x_init(&board_smc91x_data);
44 static inline void board_smc91x_init(void)
48 #endif /* defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) */
50 static void enable_board_wakeup_source(void)
52 /* T2 interrupt line (keypad) */
53 omap_mux_init_signal("sys_nirq",
54 OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
57 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
59 .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
60 .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
61 .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
64 .reset_gpio_port[0] = 126,
65 .reset_gpio_port[1] = 61,
66 .reset_gpio_port[2] = -EINVAL
69 static struct omap_board_config_kernel sdp_config[] __initdata = {
72 static void __init omap_sdp_init_irq(void)
74 omap_board_config = sdp_config;
75 omap_board_config_size = ARRAY_SIZE(sdp_config);
76 omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
77 h8mbx00u0mer0em_sdrc_params);
82 #ifdef CONFIG_OMAP_MUX
83 static struct omap_board_mux board_mux[] __initdata = {
84 { .reg_offset = OMAP_MUX_TERMINATOR },
87 #define board_mux NULL
90 static void __init omap_sdp_init(void)
92 omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
94 zoom_peripherals_init();
96 enable_board_wakeup_source();
97 usb_ehci_init(&ehci_pdata);
100 MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
101 .phys_io = 0x48000000,
102 .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
103 .boot_params = 0x80000100,
104 .map_io = omap3_map_io,
105 .reserve = omap_reserve,
106 .init_irq = omap_sdp_init_irq,
107 .init_machine = omap_sdp_init,
108 .timer = &omap_timer,