3 menu "TI OMAP2/3/4 Specific Features"
5 config ARCH_OMAP2PLUS_TYPICAL
6 bool "Typical OMAP configuration"
12 select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
14 select SERIAL_OMAP_CONSOLE
17 select MENELAUS if ARCH_OMAP2
18 select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
19 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
22 Compile a kernel suitable for booting most boards
24 config SOC_HAS_OMAP2_SDRC
25 bool "OMAP2 SDRAM Controller support"
29 depends on ARCH_OMAP2PLUS
32 select MULTI_IRQ_HANDLER
33 select SOC_HAS_OMAP2_SDRC
37 depends on ARCH_OMAP2PLUS
40 select USB_ARCH_HAS_EHCI if USB_SUPPORT
43 select ARM_CPU_SUSPEND if PM
44 select MULTI_IRQ_HANDLER
45 select SOC_HAS_OMAP2_SDRC
50 depends on ARCH_OMAP2PLUS
55 select LOCAL_TIMERS if SMP
56 select PL310_ERRATA_588369
57 select PL310_ERRATA_727915
58 select ARM_ERRATA_720789
61 select USB_ARCH_HAS_EHCI if USB_SUPPORT
62 select ARM_CPU_SUSPEND if PM
70 comment "OMAP Core Type"
74 bool "OMAP2420 support"
78 select SOC_HAS_OMAP2_SDRC
81 bool "OMAP2430 support"
84 select SOC_HAS_OMAP2_SDRC
87 bool "OMAP3430 support"
90 select SOC_HAS_OMAP2_SDRC
101 select ARM_CPU_SUSPEND if PM
102 select MULTI_IRQ_HANDLER
104 config OMAP_PACKAGE_ZAF
107 config OMAP_PACKAGE_ZAC
110 config OMAP_PACKAGE_CBC
113 config OMAP_PACKAGE_CBB
116 config OMAP_PACKAGE_CUS
119 config OMAP_PACKAGE_CBP
122 config OMAP_PACKAGE_CBL
125 config OMAP_PACKAGE_CBS
128 comment "OMAP Board Type"
129 depends on ARCH_OMAP2PLUS
131 config MACH_OMAP_GENERIC
132 bool "Generic OMAP2+ board"
133 depends on ARCH_OMAP2PLUS
136 Support for generic TI OMAP2+ boards using Flattened Device Tree.
137 More information at Documentation/devicetree
139 config MACH_OMAP2_TUSB6010
141 depends on ARCH_OMAP2 && SOC_OMAP2420
142 default y if MACH_NOKIA_N8X0
145 bool "OMAP 2420 H4 board"
146 depends on SOC_OMAP2420
148 select OMAP_PACKAGE_ZAF
149 select OMAP_DEBUG_DEVICES
151 config MACH_OMAP_APOLLON
152 bool "OMAP 2420 Apollon board"
153 depends on SOC_OMAP2420
155 select OMAP_PACKAGE_ZAC
157 config MACH_OMAP_2430SDP
158 bool "OMAP 2430 SDP board"
159 depends on SOC_OMAP2430
161 select OMAP_PACKAGE_ZAC
163 config MACH_OMAP3_BEAGLE
164 bool "OMAP3 BEAGLE board"
165 depends on ARCH_OMAP3
167 select OMAP_PACKAGE_CBB
169 config MACH_DEVKIT8000
170 bool "DEVKIT8000 board"
171 depends on ARCH_OMAP3
173 select OMAP_PACKAGE_CUS
176 bool "OMAP3 LDP board"
177 depends on ARCH_OMAP3
179 select OMAP_PACKAGE_CBB
181 config MACH_OMAP3530_LV_SOM
182 bool "OMAP3 Logic 3530 LV SOM board"
183 depends on ARCH_OMAP3
184 select OMAP_PACKAGE_CBB
187 Support for the LogicPD OMAP3530 SOM Development kit
188 for full description please see the products webpage at
189 http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit
191 config MACH_OMAP3_TORPEDO
192 bool "OMAP3 Logic 35x Torpedo board"
193 depends on ARCH_OMAP3
194 select OMAP_PACKAGE_CBB
197 Support for the LogicPD OMAP35x Torpedo Development kit
198 for full description please see the products webpage at
199 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
202 bool "Gumstix Overo board"
203 depends on ARCH_OMAP3
205 select OMAP_PACKAGE_CBB
208 bool "OMAP 3530 EVM board"
209 depends on ARCH_OMAP3
211 select OMAP_PACKAGE_CBB
213 config MACH_OMAP3517EVM
214 bool "OMAP3517/ AM3517 EVM board"
215 depends on ARCH_OMAP3
217 select OMAP_PACKAGE_CBB
219 config MACH_CRANEBOARD
220 bool "AM3517/05 CRANE board"
221 depends on ARCH_OMAP3
222 select OMAP_PACKAGE_CBB
224 config MACH_OMAP3_PANDORA
226 depends on ARCH_OMAP3
228 select OMAP_PACKAGE_CBB
229 select REGULATOR_FIXED_VOLTAGE if REGULATOR
231 config MACH_OMAP3_TOUCHBOOK
232 bool "OMAP3 Touch Book"
233 depends on ARCH_OMAP3
236 config MACH_OMAP_3430SDP
237 bool "OMAP 3430 SDP board"
238 depends on ARCH_OMAP3
240 select OMAP_PACKAGE_CBB
242 config MACH_NOKIA_N800
245 config MACH_NOKIA_N810
248 config MACH_NOKIA_N810_WIMAX
251 config MACH_NOKIA_N8X0
252 bool "Nokia N800/N810"
253 depends on SOC_OMAP2420
255 select OMAP_PACKAGE_ZAC
256 select MACH_NOKIA_N800
257 select MACH_NOKIA_N810
258 select MACH_NOKIA_N810_WIMAX
260 config MACH_NOKIA_RM680
261 bool "Nokia RM-680/696 board"
262 depends on ARCH_OMAP3
264 select OMAP_PACKAGE_CBB
265 select MACH_NOKIA_RM696
267 config MACH_NOKIA_RX51
268 bool "Nokia RX-51 board"
269 depends on ARCH_OMAP3
271 select OMAP_PACKAGE_CBB
273 config MACH_OMAP_ZOOM2
274 bool "OMAP3 Zoom2 board"
275 depends on ARCH_OMAP3
277 select OMAP_PACKAGE_CBB
279 select SERIAL_CORE_CONSOLE
280 select SERIAL_8250_CONSOLE
281 select REGULATOR_FIXED_VOLTAGE if REGULATOR
283 config MACH_OMAP_ZOOM3
284 bool "OMAP3630 Zoom3 board"
285 depends on ARCH_OMAP3
287 select OMAP_PACKAGE_CBP
289 select SERIAL_CORE_CONSOLE
290 select SERIAL_8250_CONSOLE
291 select REGULATOR_FIXED_VOLTAGE if REGULATOR
294 bool "CompuLab CM-T35/CM-T3730 modules"
295 depends on ARCH_OMAP3
298 select OMAP_PACKAGE_CUS
301 bool "CompuLab CM-T3517 module"
302 depends on ARCH_OMAP3
304 select OMAP_PACKAGE_CBB
311 depends on ARCH_OMAP3
313 select OMAP_PACKAGE_CBB
316 bool "IGEP OMAP3 module"
317 depends on ARCH_OMAP3
319 select OMAP_PACKAGE_CBB
323 bool "OMAP3 SBC STALKER board"
324 depends on ARCH_OMAP3
326 select OMAP_PACKAGE_CUS
328 config MACH_OMAP_3630SDP
329 bool "OMAP3630 SDP board"
330 depends on ARCH_OMAP3
332 select OMAP_PACKAGE_CBP
334 config MACH_TI8168EVM
335 bool "TI8168 Evaluation Module"
336 depends on SOC_TI81XX
339 config MACH_TI8148EVM
340 bool "TI8148 Evaluation Module"
341 depends on SOC_TI81XX
344 config MACH_OMAP_4430SDP
345 bool "OMAP 4430 SDP board"
347 depends on ARCH_OMAP4
348 select OMAP_PACKAGE_CBL
349 select OMAP_PACKAGE_CBS
350 select REGULATOR_FIXED_VOLTAGE if REGULATOR
352 config MACH_OMAP4_PANDA
353 bool "OMAP4 Panda Board"
355 depends on ARCH_OMAP4
356 select OMAP_PACKAGE_CBL
357 select OMAP_PACKAGE_CBS
358 select REGULATOR_FIXED_VOLTAGE if REGULATOR
361 bool "OMAP3 debugging peripherals"
362 depends on ARCH_OMAP3
366 Say Y here to enable debugging hardware of omap3
368 config OMAP3_SDRC_AC_TIMING
369 bool "Enable SDRC AC timing register changes"
370 depends on ARCH_OMAP3
373 If you know that none of your system initiators will attempt to
374 access SDRAM during CORE DVFS, select Y here. This should boost
375 SDRAM performance at lower CORE OPPs. There are relatively few
376 users who will wish to say yes at this point - almost everyone will
377 wish to say no. Selecting yes without understanding what is
378 going on could result in system crashes;
380 config OMAP4_ERRATA_I688
381 bool "OMAP4 errata: Async Bridge Corruption"
382 depends on ARCH_OMAP4
383 select ARCH_HAS_BARRIERS
385 If a data is stalled inside asynchronous bridge because of back
386 pressure, it may be accepted multiple times, creating pointer
387 misalignment that will corrupt next transfers on that data path
388 until next reset of the system (No recovery procedure once the
389 issue is hit, the path remains consistently broken). Async bridge
390 can be found on path between MPU to EMIF and MPU to L3 interconnect.
391 This situation can happen only when the idle is initiated by a
392 Master Request Disconnection (which is trigged by software when
393 executing WFI on CPU).
394 The work-around for this errata needs all the initiators connected
395 through async bridge must ensure that data path is properly drained
396 before issuing WFI. This condition will be met if one Strongly ordered
397 access is performed to the target right before executing the WFI.
398 In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained.
399 IO barrier ensure that there is no synchronisation loss on initiators
400 operating on both interconnect port simultaneously.