ARM: OMAP: remove plat/board.h file
[pandora-kernel.git] / arch / arm / mach-omap1 / board-voiceblue.c
1 /*
2  * linux/arch/arm/mach-omap1/board-voiceblue.c
3  *
4  * Modified from board-generic.c
5  *
6  * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
7  *
8  * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 as
12  * published by the Free Software Foundation.
13  */
14
15 #include <linux/delay.h>
16 #include <linux/gpio.h>
17 #include <linux/platform_device.h>
18 #include <linux/interrupt.h>
19 #include <linux/irq.h>
20 #include <linux/init.h>
21 #include <linux/kernel.h>
22 #include <linux/mtd/physmap.h>
23 #include <linux/notifier.h>
24 #include <linux/reboot.h>
25 #include <linux/serial_8250.h>
26 #include <linux/serial_reg.h>
27 #include <linux/smc91x.h>
28 #include <linux/export.h>
29
30 #include <asm/mach-types.h>
31 #include <asm/mach/arch.h>
32 #include <asm/mach/map.h>
33
34 #include <plat/board-voiceblue.h>
35 #include <plat/flash.h>
36 #include <plat/mux.h>
37 #include <plat/tc.h>
38
39 #include <mach/hardware.h>
40 #include <mach/usb.h>
41
42 #include "common.h"
43
44 static struct plat_serial8250_port voiceblue_ports[] = {
45         {
46                 .mapbase        = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
47                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
48                 .iotype         = UPIO_MEM,
49                 .regshift       = 1,
50                 .uartclk        = 3686400,
51         },
52         {
53                 .mapbase        = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
54                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
55                 .iotype         = UPIO_MEM,
56                 .regshift       = 1,
57                 .uartclk        = 3686400,
58         },
59         {
60                 .mapbase        = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
61                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
62                 .iotype         = UPIO_MEM,
63                 .regshift       = 1,
64                 .uartclk        = 3686400,
65         },
66         {
67                 .mapbase        = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
68                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
69                 .iotype         = UPIO_MEM,
70                 .regshift       = 1,
71                 .uartclk        = 3686400,
72         },
73         { },
74 };
75
76 static struct platform_device serial_device = {
77         .name                   = "serial8250",
78         .id                     = PLAT8250_DEV_PLATFORM1,
79 };
80
81 static int __init ext_uart_init(void)
82 {
83         if (!machine_is_voiceblue())
84                 return -ENODEV;
85
86         voiceblue_ports[0].irq = gpio_to_irq(12);
87         voiceblue_ports[1].irq = gpio_to_irq(13);
88         voiceblue_ports[2].irq = gpio_to_irq(14);
89         voiceblue_ports[3].irq = gpio_to_irq(15);
90         serial_device.dev.platform_data = voiceblue_ports;
91         return platform_device_register(&serial_device);
92 }
93 arch_initcall(ext_uart_init);
94
95 static struct physmap_flash_data voiceblue_flash_data = {
96         .width          = 2,
97         .set_vpp        = omap1_set_vpp,
98 };
99
100 static struct resource voiceblue_flash_resource = {
101         .start  = OMAP_CS0_PHYS,
102         .end    = OMAP_CS0_PHYS + SZ_32M - 1,
103         .flags  = IORESOURCE_MEM,
104 };
105
106 static struct platform_device voiceblue_flash_device = {
107         .name           = "physmap-flash",
108         .id             = 0,
109         .dev            = {
110                 .platform_data  = &voiceblue_flash_data,
111         },
112         .num_resources  = 1,
113         .resource       = &voiceblue_flash_resource,
114 };
115
116 static struct smc91x_platdata voiceblue_smc91x_info = {
117         .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT,
118         .leda   = RPC_LED_100_10,
119         .ledb   = RPC_LED_TX_RX,
120 };
121
122 static struct resource voiceblue_smc91x_resources[] = {
123         [0] = {
124                 .start  = OMAP_CS2_PHYS + 0x300,
125                 .end    = OMAP_CS2_PHYS + 0x300 + 16,
126                 .flags  = IORESOURCE_MEM,
127         },
128         [1] = {
129                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
130         },
131 };
132
133 static struct platform_device voiceblue_smc91x_device = {
134         .name           = "smc91x",
135         .id             = 0,
136         .dev    = {
137                 .platform_data  = &voiceblue_smc91x_info,
138         },
139         .num_resources  = ARRAY_SIZE(voiceblue_smc91x_resources),
140         .resource       = voiceblue_smc91x_resources,
141 };
142
143 static struct platform_device *voiceblue_devices[] __initdata = {
144         &voiceblue_flash_device,
145         &voiceblue_smc91x_device,
146 };
147
148 static struct omap_usb_config voiceblue_usb_config __initdata = {
149         .hmc_mode       = 3,
150         .register_host  = 1,
151         .register_dev   = 1,
152         .pins[0]        = 2,
153         .pins[1]        = 6,
154         .pins[2]        = 6,
155 };
156
157 #define MACHINE_PANICED         1
158 #define MACHINE_REBOOTING       2
159 #define MACHINE_REBOOT          4
160 static unsigned long machine_state;
161
162 static int panic_event(struct notifier_block *this, unsigned long event,
163          void *ptr)
164 {
165         if (test_and_set_bit(MACHINE_PANICED, &machine_state))
166                 return NOTIFY_DONE;
167
168         /* Flash power LED */
169         omap_writeb(0x78, OMAP_LPG1_LCR);
170         omap_writeb(0x01, OMAP_LPG1_PMR);       /* Enable clock */
171
172         return NOTIFY_DONE;
173 }
174
175 static struct notifier_block panic_block = {
176         .notifier_call  = panic_event,
177 };
178
179 static int __init voiceblue_setup(void)
180 {
181         if (!machine_is_voiceblue())
182                 return -ENODEV;
183
184         /* Setup panic notifier */
185         atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
186
187         return 0;
188 }
189 postcore_initcall(voiceblue_setup);
190
191 static int wdt_gpio_state;
192
193 void voiceblue_wdt_enable(void)
194 {
195         gpio_direction_output(0, 0);
196         gpio_set_value(0, 1);
197         gpio_set_value(0, 0);
198         wdt_gpio_state = 0;
199 }
200
201 void voiceblue_wdt_disable(void)
202 {
203         gpio_set_value(0, 0);
204         gpio_set_value(0, 1);
205         gpio_set_value(0, 0);
206         gpio_direction_input(0);
207 }
208
209 void voiceblue_wdt_ping(void)
210 {
211         if (test_bit(MACHINE_REBOOT, &machine_state))
212                 return;
213
214         wdt_gpio_state = !wdt_gpio_state;
215         gpio_set_value(0, wdt_gpio_state);
216 }
217
218 static void voiceblue_restart(char mode, const char *cmd)
219 {
220         /*
221          * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
222          * "Global Software Reset Affects Traffic Controller Frequency".
223          */
224         if (cpu_is_omap5912()) {
225                 omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
226                 omap_writew(0x8, ARM_RSTCT1);
227         }
228
229         set_bit(MACHINE_REBOOT, &machine_state);
230         voiceblue_wdt_enable();
231         while (1) ;
232 }
233
234 EXPORT_SYMBOL(voiceblue_wdt_enable);
235 EXPORT_SYMBOL(voiceblue_wdt_disable);
236 EXPORT_SYMBOL(voiceblue_wdt_ping);
237
238 static void __init voiceblue_init(void)
239 {
240         /* mux pins for uarts */
241         omap_cfg_reg(UART1_TX);
242         omap_cfg_reg(UART1_RTS);
243         omap_cfg_reg(UART2_TX);
244         omap_cfg_reg(UART2_RTS);
245         omap_cfg_reg(UART3_TX);
246         omap_cfg_reg(UART3_RX);
247
248         /* Watchdog */
249         gpio_request(0, "Watchdog");
250         /* smc91x reset */
251         gpio_request(7, "SMC91x reset");
252         gpio_direction_output(7, 1);
253         udelay(2);      /* wait at least 100ns */
254         gpio_set_value(7, 0);
255         mdelay(50);     /* 50ms until PHY ready */
256         /* smc91x interrupt pin */
257         gpio_request(8, "SMC91x irq");
258         /* 16C554 reset*/
259         gpio_request(6, "16C554 reset");
260         gpio_direction_output(6, 0);
261         /* 16C554 interrupt pins */
262         gpio_request(12, "16C554 irq");
263         gpio_request(13, "16C554 irq");
264         gpio_request(14, "16C554 irq");
265         gpio_request(15, "16C554 irq");
266         irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
267         irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
268         irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
269         irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
270
271         voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
272         voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
273         platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
274         omap_serial_init();
275         omap1_usb_init(&voiceblue_usb_config);
276         omap_register_i2c_bus(1, 100, NULL, 0);
277
278         /* There is a good chance board is going up, so enable power LED
279          * (it is connected through invertor) */
280         omap_writeb(0x00, OMAP_LPG1_LCR);
281         omap_writeb(0x00, OMAP_LPG1_PMR);       /* Disable clock */
282 }
283
284 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
285         /* Maintainer: Ladislav Michl <michl@2n.cz> */
286         .atag_offset    = 0x100,
287         .map_io         = omap15xx_map_io,
288         .init_early     = omap1_init_early,
289         .reserve        = omap_reserve,
290         .init_irq       = omap1_init_irq,
291         .init_machine   = voiceblue_init,
292         .init_late      = omap1_init_late,
293         .timer          = &omap1_timer,
294         .restart        = voiceblue_restart,
295 MACHINE_END