Merge branch 'submit1' of viper:/spare/repo/irq-remove-2.6 into irqcleanups
[pandora-kernel.git] / arch / arm / mach-ixp23xx / core.c
1 /*
2  * arch/arm/mach-ixp23xx/core.c
3  *
4  * Core routines for IXP23xx chips
5  *
6  * Author: Deepak Saxena <dsaxena@plexity.net>
7  *
8  * Copyright 2005 (c) MontaVista Software, Inc.
9  *
10  * Based on 2.4 code Copyright 2004 (c) Intel Corporation
11  *
12  * This file is licensed under the terms of the GNU General Public
13  * License version 2. This program is licensed "as is" without any
14  * warranty of any kind, whether express or implied.
15  */
16
17 #include <linux/kernel.h>
18 #include <linux/init.h>
19 #include <linux/spinlock.h>
20 #include <linux/sched.h>
21 #include <linux/interrupt.h>
22 #include <linux/serial.h>
23 #include <linux/tty.h>
24 #include <linux/bitops.h>
25 #include <linux/serial.h>
26 #include <linux/serial_8250.h>
27 #include <linux/serial_core.h>
28 #include <linux/device.h>
29 #include <linux/mm.h>
30 #include <linux/time.h>
31 #include <linux/timex.h>
32
33 #include <asm/types.h>
34 #include <asm/setup.h>
35 #include <asm/memory.h>
36 #include <asm/hardware.h>
37 #include <asm/mach-types.h>
38 #include <asm/irq.h>
39 #include <asm/system.h>
40 #include <asm/tlbflush.h>
41 #include <asm/pgtable.h>
42
43 #include <asm/mach/map.h>
44 #include <asm/mach/time.h>
45 #include <asm/mach/irq.h>
46 #include <asm/mach/arch.h>
47
48
49 /*************************************************************************
50  * Chip specific mappings shared by all IXP23xx systems
51  *************************************************************************/
52 static struct map_desc ixp23xx_io_desc[] __initdata = {
53         { /* XSI-CPP CSRs */
54                 .virtual        = IXP23XX_XSI2CPP_CSR_VIRT,
55                 .pfn            = __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS),
56                 .length         = IXP23XX_XSI2CPP_CSR_SIZE,
57                 .type           = MT_DEVICE,
58         }, { /* Expansion Bus Config */
59                 .virtual        = IXP23XX_EXP_CFG_VIRT,
60                 .pfn            = __phys_to_pfn(IXP23XX_EXP_CFG_PHYS),
61                 .length         = IXP23XX_EXP_CFG_SIZE,
62                 .type           = MT_DEVICE,
63         }, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */
64                 .virtual        = IXP23XX_PERIPHERAL_VIRT,
65                 .pfn            = __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS),
66                 .length         = IXP23XX_PERIPHERAL_SIZE,
67                 .type           = MT_DEVICE,
68         }, { /* CAP CSRs */
69                 .virtual        = IXP23XX_CAP_CSR_VIRT,
70                 .pfn            = __phys_to_pfn(IXP23XX_CAP_CSR_PHYS),
71                 .length         = IXP23XX_CAP_CSR_SIZE,
72                 .type           = MT_DEVICE,
73         }, { /* MSF CSRs */
74                 .virtual        = IXP23XX_MSF_CSR_VIRT,
75                 .pfn            = __phys_to_pfn(IXP23XX_MSF_CSR_PHYS),
76                 .length         = IXP23XX_MSF_CSR_SIZE,
77                 .type           = MT_DEVICE,
78         }, { /* PCI I/O Space */
79                 .virtual        = IXP23XX_PCI_IO_VIRT,
80                 .pfn            = __phys_to_pfn(IXP23XX_PCI_IO_PHYS),
81                 .length         = IXP23XX_PCI_IO_SIZE,
82                 .type           = MT_DEVICE,
83         }, { /* PCI Config Space */
84                 .virtual        = IXP23XX_PCI_CFG_VIRT,
85                 .pfn            = __phys_to_pfn(IXP23XX_PCI_CFG_PHYS),
86                 .length         = IXP23XX_PCI_CFG_SIZE,
87                 .type           = MT_DEVICE,
88         }, { /* PCI local CFG CSRs */
89                 .virtual        = IXP23XX_PCI_CREG_VIRT,
90                 .pfn            = __phys_to_pfn(IXP23XX_PCI_CREG_PHYS),
91                 .length         = IXP23XX_PCI_CREG_SIZE,
92                 .type           = MT_DEVICE,
93         }, { /* PCI MEM Space */
94                 .virtual        = IXP23XX_PCI_MEM_VIRT,
95                 .pfn            = __phys_to_pfn(IXP23XX_PCI_MEM_PHYS),
96                 .length         = IXP23XX_PCI_MEM_SIZE,
97                 .type           = MT_DEVICE,
98         }
99 };
100
101 void __init ixp23xx_map_io(void)
102 {
103         iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc));
104 }
105
106
107 /***************************************************************************
108  * IXP23xx Interrupt Handling
109  ***************************************************************************/
110 enum ixp23xx_irq_type {
111         IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE
112 };
113
114 static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type);
115
116 static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
117 {
118         int line = irq - IRQ_IXP23XX_GPIO6 + 6;
119         u32 int_style;
120         enum ixp23xx_irq_type irq_type;
121         volatile u32 *int_reg;
122
123         /*
124          * Only GPIOs 6-15 are wired to interrupts on IXP23xx
125          */
126         if (line < 6 || line > 15)
127                 return -EINVAL;
128
129         switch (type) {
130         case IRQT_BOTHEDGE:
131                 int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
132                 irq_type = IXP23XX_IRQ_EDGE;
133                 break;
134         case IRQT_RISING:
135                 int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
136                 irq_type = IXP23XX_IRQ_EDGE;
137                 break;
138         case IRQT_FALLING:
139                 int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
140                 irq_type = IXP23XX_IRQ_EDGE;
141                 break;
142         case IRQT_HIGH:
143                 int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
144                 irq_type = IXP23XX_IRQ_LEVEL;
145                 break;
146         case IRQT_LOW:
147                 int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
148                 irq_type = IXP23XX_IRQ_LEVEL;
149                 break;
150         default:
151                 return -EINVAL;
152         }
153
154         ixp23xx_config_irq(irq, irq_type);
155
156         if (line >= 8) {        /* pins 8-15 */
157                 line -= 8;
158                 int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R;
159         } else {                /* pins 0-7 */
160                 int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R;
161         }
162
163         /*
164          * Clear pending interrupts
165          */
166         *IXP23XX_GPIO_GPISR = (1 << line);
167
168         /* Clear the style for the appropriate pin */
169         *int_reg &= ~(IXP23XX_GPIO_STYLE_MASK <<
170                         (line * IXP23XX_GPIO_STYLE_SIZE));
171
172         /* Set the new style */
173         *int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE));
174
175         return 0;
176 }
177
178 static void ixp23xx_irq_mask(unsigned int irq)
179 {
180         volatile unsigned long *intr_reg;
181
182         if (irq >= 56)
183                 irq += 8;
184
185         intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
186         *intr_reg &= ~(1 << (irq % 32));
187 }
188
189 static void ixp23xx_irq_ack(unsigned int irq)
190 {
191         int line = irq - IRQ_IXP23XX_GPIO6 + 6;
192
193         if ((line < 6) || (line > 15))
194                 return;
195
196         *IXP23XX_GPIO_GPISR = (1 << line);
197 }
198
199 /*
200  * Level triggered interrupts on GPIO lines can only be cleared when the
201  * interrupt condition disappears.
202  */
203 static void ixp23xx_irq_level_unmask(unsigned int irq)
204 {
205         volatile unsigned long *intr_reg;
206
207         ixp23xx_irq_ack(irq);
208
209         if (irq >= 56)
210                 irq += 8;
211
212         intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
213         *intr_reg |= (1 << (irq % 32));
214 }
215
216 static void ixp23xx_irq_edge_unmask(unsigned int irq)
217 {
218         volatile unsigned long *intr_reg;
219
220         if (irq >= 56)
221                 irq += 8;
222
223         intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
224         *intr_reg |= (1 << (irq % 32));
225 }
226
227 static struct irqchip ixp23xx_irq_level_chip = {
228         .ack            = ixp23xx_irq_mask,
229         .mask           = ixp23xx_irq_mask,
230         .unmask         = ixp23xx_irq_level_unmask,
231         .set_type       = ixp23xx_irq_set_type
232 };
233
234 static struct irqchip ixp23xx_irq_edge_chip = {
235         .ack            = ixp23xx_irq_ack,
236         .mask           = ixp23xx_irq_mask,
237         .unmask         = ixp23xx_irq_edge_unmask,
238         .set_type       = ixp23xx_irq_set_type
239 };
240
241 static void ixp23xx_pci_irq_mask(unsigned int irq)
242 {
243         *IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq));
244 }
245
246 static void ixp23xx_pci_irq_unmask(unsigned int irq)
247 {
248         *IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq));
249 }
250
251 /*
252  * TODO: Should this just be done at ASM level?
253  */
254 static void pci_handler(unsigned int irq, struct irqdesc *desc)
255 {
256         u32 pci_interrupt;
257         unsigned int irqno;
258         struct irqdesc *int_desc;
259
260         pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS;
261
262         desc->chip->ack(irq);
263
264         /* See which PCI_INTA, or PCI_INTB interrupted */
265         if (pci_interrupt & (1 << 26)) {
266                 irqno = IRQ_IXP23XX_INTB;
267         } else if (pci_interrupt & (1 << 27)) {
268                 irqno = IRQ_IXP23XX_INTA;
269         } else {
270                 BUG();
271         }
272
273         int_desc = irq_desc + irqno;
274         desc_handle_irq(irqno, int_desc);
275
276         desc->chip->unmask(irq);
277 }
278
279 static struct irqchip ixp23xx_pci_irq_chip = {
280         .ack    = ixp23xx_pci_irq_mask,
281         .mask   = ixp23xx_pci_irq_mask,
282         .unmask = ixp23xx_pci_irq_unmask
283 };
284
285 static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type)
286 {
287         switch (type) {
288         case IXP23XX_IRQ_LEVEL:
289                 set_irq_chip(irq, &ixp23xx_irq_level_chip);
290                 set_irq_handler(irq, do_level_IRQ);
291                 break;
292         case IXP23XX_IRQ_EDGE:
293                 set_irq_chip(irq, &ixp23xx_irq_edge_chip);
294                 set_irq_handler(irq, do_edge_IRQ);
295                 break;
296         }
297         set_irq_flags(irq, IRQF_VALID);
298 }
299
300 void __init ixp23xx_init_irq(void)
301 {
302         int irq;
303
304         /* Route everything to IRQ */
305         *IXP23XX_INTR_SEL1 = 0x0;
306         *IXP23XX_INTR_SEL2 = 0x0;
307         *IXP23XX_INTR_SEL3 = 0x0;
308         *IXP23XX_INTR_SEL4 = 0x0;
309
310         /* Mask all sources */
311         *IXP23XX_INTR_EN1 = 0x0;
312         *IXP23XX_INTR_EN2 = 0x0;
313         *IXP23XX_INTR_EN3 = 0x0;
314         *IXP23XX_INTR_EN4 = 0x0;
315
316         /*
317          * Configure all IRQs for level-sensitive operation
318          */
319         for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) {
320                 ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL);
321         }
322
323         for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) {
324                 set_irq_chip(irq, &ixp23xx_pci_irq_chip);
325                 set_irq_handler(irq, do_level_IRQ);
326                 set_irq_flags(irq, IRQF_VALID);
327         }
328
329         set_irq_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler);
330 }
331
332
333 /*************************************************************************
334  * Timer-tick functions for IXP23xx
335  *************************************************************************/
336 #define CLOCK_TICKS_PER_USEC    (CLOCK_TICK_RATE / USEC_PER_SEC)
337
338 static unsigned long next_jiffy_time;
339
340 static unsigned long
341 ixp23xx_gettimeoffset(void)
342 {
343         unsigned long elapsed;
344
345         elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH);
346
347         return elapsed / CLOCK_TICKS_PER_USEC;
348 }
349
350 static irqreturn_t
351 ixp23xx_timer_interrupt(int irq, void *dev_id)
352 {
353         /* Clear Pending Interrupt by writing '1' to it */
354         *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
355         while ((signed long)(*IXP23XX_TIMER_CONT - next_jiffy_time) >= LATCH) {
356                 timer_tick();
357                 next_jiffy_time += LATCH;
358         }
359
360         return IRQ_HANDLED;
361 }
362
363 static struct irqaction ixp23xx_timer_irq = {
364         .name           = "IXP23xx Timer Tick",
365         .handler        = ixp23xx_timer_interrupt,
366         .flags          = IRQF_DISABLED | IRQF_TIMER,
367 };
368
369 void __init ixp23xx_init_timer(void)
370 {
371         /* Clear Pending Interrupt by writing '1' to it */
372         *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
373
374         /* Setup the Timer counter value */
375         *IXP23XX_TIMER1_RELOAD =
376                 (LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE;
377
378         *IXP23XX_TIMER_CONT = 0;
379         next_jiffy_time = LATCH;
380
381         /* Connect the interrupt handler and enable the interrupt */
382         setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq);
383 }
384
385 struct sys_timer ixp23xx_timer = {
386         .init           = ixp23xx_init_timer,
387         .offset         = ixp23xx_gettimeoffset,
388 };
389
390
391 /*************************************************************************
392  * IXP23xx Platform Initializaion
393  *************************************************************************/
394 static struct resource ixp23xx_uart_resources[] = {
395         {
396                 .start          = IXP23XX_UART1_PHYS,
397                 .end            = IXP23XX_UART1_PHYS + 0x0fff,
398                 .flags          = IORESOURCE_MEM
399         }, {
400                 .start          = IXP23XX_UART2_PHYS,
401                 .end            = IXP23XX_UART2_PHYS + 0x0fff,
402                 .flags          = IORESOURCE_MEM
403         }
404 };
405
406 static struct plat_serial8250_port ixp23xx_uart_data[] = {
407         {
408                 .mapbase        = IXP23XX_UART1_PHYS,
409                 .membase        = (char *)(IXP23XX_UART1_VIRT + 3),
410                 .irq            = IRQ_IXP23XX_UART1,
411                 .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
412                 .iotype         = UPIO_MEM,
413                 .regshift       = 2,
414                 .uartclk        = IXP23XX_UART_XTAL,
415         }, {
416                 .mapbase        = IXP23XX_UART2_PHYS,
417                 .membase        = (char *)(IXP23XX_UART2_VIRT + 3),
418                 .irq            = IRQ_IXP23XX_UART2,
419                 .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
420                 .iotype         = UPIO_MEM,
421                 .regshift       = 2,
422                 .uartclk        = IXP23XX_UART_XTAL,
423         },
424         { },
425 };
426
427 static struct platform_device ixp23xx_uart = {
428         .name                   = "serial8250",
429         .id                     = 0,
430         .dev.platform_data      = ixp23xx_uart_data,
431         .num_resources          = 2,
432         .resource               = ixp23xx_uart_resources,
433 };
434
435 static struct platform_device *ixp23xx_devices[] __initdata = {
436         &ixp23xx_uart,
437 };
438
439 void __init ixp23xx_sys_init(void)
440 {
441         *IXP23XX_EXP_UNIT_FUSE |= 0xf;
442         platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
443 }