arch/arm/mach-ep93xx/edb93xx.c

   1 /*
   2  * arch/arm/mach-ep93xx/edb93xx.c
   3  * Cirrus Logic EDB93xx Development Board support.
   4  *
   5  * EDB93XX, EDB9301, EDB9307A
   6  * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com>
   7  *
   8  * EDB9302
   9  * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
  10  *
  11  * EDB9302A, EDB9315, EDB9315A
  12  * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
  13  *
  14  * EDB9307
  15  * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
  16  *
  17  * EDB9312
  18  * Copyright (C) 2006 Infosys Technologies Limited
  19  *                    Toufeeq Hussain <toufeeq_hussain@infosys.com>
  20  *
  21  * This program is free software; you can redistribute it and/or modify
  22  * it under the terms of the GNU General Public License as published by
  23  * the Free Software Foundation; either version 2 of the License, or (at
  24  * your option) any later version.
  25  */
  26
  27 #include <linux/kernel.h>
  28 #include <linux/init.h>
  29 #include <linux/platform_device.h>
  30 #include <linux/gpio.h>
  31 #include <linux/i2c.h>
  32 #include <linux/i2c-gpio.h>
  33 #include <linux/spi/spi.h>
  34
  35 #include <sound/cs4271.h>
  36
  37 #include <mach/hardware.h>
  38 #include <mach/fb.h>
  39 #include <mach/ep93xx_spi.h>
  40
  41 #include <asm/mach-types.h>
  42 #include <asm/mach/arch.h>
  43
  44
  45 static void __init edb93xx_register_flash(void)
  46 {
  47         if (machine_is_edb9307() || machine_is_edb9312() ||
  48             machine_is_edb9315()) {
  49                 ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
  50         } else {
  51                 ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
  52         }
  53 }
  54
  55 static struct ep93xx_eth_data __initdata edb93xx_eth_data = {
  56         .phy_id         = 1,
  57 };
  58
  59
  60 /*************************************************************************
  61  * EDB93xx i2c peripheral handling
  62  *************************************************************************/
  63 static struct i2c_gpio_platform_data __initdata edb93xx_i2c_gpio_data = {
  64         .sda_pin                = EP93XX_GPIO_LINE_EEDAT,
  65         .sda_is_open_drain      = 0,
  66         .scl_pin                = EP93XX_GPIO_LINE_EECLK,
  67         .scl_is_open_drain      = 0,
  68         .udelay                 = 0,    /* default to 100 kHz */
  69         .timeout                = 0,    /* default to 100 ms */
  70 };
  71
  72 static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
  73         {
  74                 I2C_BOARD_INFO("isl1208", 0x6f),
  75         },
  76 };
  77
  78 static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
  79         {
  80                 I2C_BOARD_INFO("ds1337", 0x68),
  81         },
  82 };
  83
  84 static void __init edb93xx_register_i2c(void)
  85 {
  86         if (machine_is_edb9302a() || machine_is_edb9307a() ||
  87             machine_is_edb9315a()) {
  88                 ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
  89                                     edb93xxa_i2c_board_info,
  90                                     ARRAY_SIZE(edb93xxa_i2c_board_info));
  91         } else if (machine_is_edb9307() || machine_is_edb9312() ||
  92                    machine_is_edb9315()) {
  93                 ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
  94                                     edb93xx_i2c_board_info,
  95                                     ARRAY_SIZE(edb93xx_i2c_board_info));
  96         }
  97 }
  98
  99
 100 /*************************************************************************
 101  * EDB93xx SPI peripheral handling
 102  *************************************************************************/
 103 static struct cs4271_platform_data edb93xx_cs4271_data = {
 104         .gpio_nreset    = -EINVAL,      /* filled in later */
 105 };
 106
 107 static int edb93xx_cs4271_hw_setup(struct spi_device *spi)
 108 {
 109         return gpio_request_one(EP93XX_GPIO_LINE_EGPIO6,
 110                                 GPIOF_OUT_INIT_HIGH, spi->modalias);
 111 }
 112
 113 static void edb93xx_cs4271_hw_cleanup(struct spi_device *spi)
 114 {
 115         gpio_free(EP93XX_GPIO_LINE_EGPIO6);
 116 }
 117
 118 static void edb93xx_cs4271_hw_cs_control(struct spi_device *spi, int value)
 119 {
 120         gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value);
 121 }
 122
 123 static struct ep93xx_spi_chip_ops edb93xx_cs4271_hw = {
 124         .setup          = edb93xx_cs4271_hw_setup,
 125         .cleanup        = edb93xx_cs4271_hw_cleanup,
 126         .cs_control     = edb93xx_cs4271_hw_cs_control,
 127 };
 128
 129 static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
 130         {
 131                 .modalias               = "cs4271",
 132                 .platform_data          = &edb93xx_cs4271_data,
 133                 .controller_data        = &edb93xx_cs4271_hw,
 134                 .max_speed_hz           = 6000000,
 135                 .bus_num                = 0,
 136                 .chip_select            = 0,
 137                 .mode                   = SPI_MODE_3,
 138         },
 139 };
 140
 141 static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
 142         .num_chipselect = ARRAY_SIZE(edb93xx_spi_board_info),
 143 };
 144
 145 static void __init edb93xx_register_spi(void)
 146 {
 147         if (machine_is_edb9301() || machine_is_edb9302())
 148                 edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
 149         else if (machine_is_edb9302a() || machine_is_edb9307a())
 150                 edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
 151         else if (machine_is_edb9315a())
 152                 edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
 153
 154         ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
 155                             ARRAY_SIZE(edb93xx_spi_board_info));
 156 }
 157
 158
 159 /*************************************************************************
 160  * EDB93xx I2S
 161  *************************************************************************/
 162 static struct platform_device edb93xx_audio_device = {
 163         .name           = "edb93xx-audio",
 164         .id             = -1,
 165 };
 166
 167 static int __init edb93xx_has_audio(void)
 168 {
 169         return (machine_is_edb9301() || machine_is_edb9302() ||
 170                 machine_is_edb9302a() || machine_is_edb9307a() ||
 171                 machine_is_edb9315a());
 172 }
 173
 174 static void __init edb93xx_register_i2s(void)
 175 {
 176         if (edb93xx_has_audio()) {
 177                 ep93xx_register_i2s();
 178                 platform_device_register(&edb93xx_audio_device);
 179         }
 180 }
 181
 182
 183 /*************************************************************************
 184  * EDB93xx pwm
 185  *************************************************************************/
 186 static void __init edb93xx_register_pwm(void)
 187 {
 188         if (machine_is_edb9301() ||
 189             machine_is_edb9302() || machine_is_edb9302a()) {
 190                 /* EP9301 and EP9302 only have pwm.1 (EGPIO14) */
 191                 ep93xx_register_pwm(0, 1);
 192         } else if (machine_is_edb9307() || machine_is_edb9307a()) {
 193                 /* EP9307 only has pwm.0 (PWMOUT) */
 194                 ep93xx_register_pwm(1, 0);
 195         } else {
 196                 /* EP9312 and EP9315 have both */
 197                 ep93xx_register_pwm(1, 1);
 198         }
 199 }
 200
 201
 202 /*************************************************************************
 203  * EDB93xx framebuffer
 204  *************************************************************************/
 205 static struct ep93xxfb_mach_info __initdata edb93xxfb_info = {
 206         .num_modes      = EP93XXFB_USE_MODEDB,
 207         .bpp            = 16,
 208         .flags          = 0,
 209 };
 210
 211 static int __init edb93xx_has_fb(void)
 212 {
 213         /* These platforms have an ep93xx with video capability */
 214         return machine_is_edb9307() || machine_is_edb9307a() ||
 215                machine_is_edb9312() || machine_is_edb9315() ||
 216                machine_is_edb9315a();
 217 }
 218
 219 static void __init edb93xx_register_fb(void)
 220 {
 221         if (!edb93xx_has_fb())
 222                 return;
 223
 224         if (machine_is_edb9307a() || machine_is_edb9315a())
 225                 edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0;
 226         else
 227                 edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3;
 228
 229         ep93xx_register_fb(&edb93xxfb_info);
 230 }
 231
 232
 233 static void __init edb93xx_init_machine(void)
 234 {
 235         ep93xx_init_devices();
 236         edb93xx_register_flash();
 237         ep93xx_register_eth(&edb93xx_eth_data, 1);
 238         edb93xx_register_i2c();
 239         edb93xx_register_spi();
 240         edb93xx_register_i2s();
 241         edb93xx_register_pwm();
 242         edb93xx_register_fb();
 243 }
 244
 245
 246 #ifdef CONFIG_MACH_EDB9301
 247 MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 248         /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 249         .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 250         .map_io         = ep93xx_map_io,
 251         .init_irq       = ep93xx_init_irq,
 252         .timer          = &ep93xx_timer,
 253         .init_machine   = edb93xx_init_machine,
 254 MACHINE_END
 255 #endif
 256
 257 #ifdef CONFIG_MACH_EDB9302
 258 MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 259         /* Maintainer: George Kashperko <george@chas.com.ua> */
 260         .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 261         .map_io         = ep93xx_map_io,
 262         .init_irq       = ep93xx_init_irq,
 263         .timer          = &ep93xx_timer,
 264         .init_machine   = edb93xx_init_machine,
 265 MACHINE_END
 266 #endif
 267
 268 #ifdef CONFIG_MACH_EDB9302A
 269 MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 270         /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 271         .boot_params    = EP93XX_SDCE0_PHYS_BASE + 0x100,
 272         .map_io         = ep93xx_map_io,
 273         .init_irq       = ep93xx_init_irq,
 274         .timer          = &ep93xx_timer,
 275         .init_machine   = edb93xx_init_machine,
 276 MACHINE_END
 277 #endif
 278
 279 #ifdef CONFIG_MACH_EDB9307
 280 MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 281         /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
 282         .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 283         .map_io         = ep93xx_map_io,
 284         .init_irq       = ep93xx_init_irq,
 285         .timer          = &ep93xx_timer,
 286         .init_machine   = edb93xx_init_machine,
 287 MACHINE_END
 288 #endif
 289
 290 #ifdef CONFIG_MACH_EDB9307A
 291 MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 292         /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 293         .boot_params    = EP93XX_SDCE0_PHYS_BASE + 0x100,
 294         .map_io         = ep93xx_map_io,
 295         .init_irq       = ep93xx_init_irq,
 296         .timer          = &ep93xx_timer,
 297         .init_machine   = edb93xx_init_machine,
 298 MACHINE_END
 299 #endif
 300
 301 #ifdef CONFIG_MACH_EDB9312
 302 MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 303         /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
 304         .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 305         .map_io         = ep93xx_map_io,
 306         .init_irq       = ep93xx_init_irq,
 307         .timer          = &ep93xx_timer,
 308         .init_machine   = edb93xx_init_machine,
 309 MACHINE_END
 310 #endif
 311
 312 #ifdef CONFIG_MACH_EDB9315
 313 MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 314         /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 315         .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 316         .map_io         = ep93xx_map_io,
 317         .init_irq       = ep93xx_init_irq,
 318         .timer          = &ep93xx_timer,
 319         .init_machine   = edb93xx_init_machine,
 320 MACHINE_END
 321 #endif
 322
 323 #ifdef CONFIG_MACH_EDB9315A
 324 MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 325         /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 326         .boot_params    = EP93XX_SDCE0_PHYS_BASE + 0x100,
 327         .map_io         = ep93xx_map_io,
 328         .init_irq       = ep93xx_init_irq,
 329         .timer          = &ep93xx_timer,
 330         .init_machine   = edb93xx_init_machine,
 331 MACHINE_END
 332 #endif