ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084
[pandora-kernel.git] / arch / arm / common / mcpm_entry.c
1 /*
2  * arch/arm/common/mcpm_entry.c -- entry point for multi-cluster PM
3  *
4  * Created by:  Nicolas Pitre, March 2012
5  * Copyright:   (C) 2012-2013  Linaro Limited
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  */
11
12 #include <linux/kernel.h>
13 #include <linux/init.h>
14 #include <linux/irqflags.h>
15
16 #include <asm/mcpm.h>
17 #include <asm/cacheflush.h>
18 #include <asm/idmap.h>
19 #include <asm/cputype.h>
20
21 extern unsigned long mcpm_entry_vectors[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER];
22
23 void mcpm_set_entry_vector(unsigned cpu, unsigned cluster, void *ptr)
24 {
25         unsigned long val = ptr ? virt_to_phys(ptr) : 0;
26         mcpm_entry_vectors[cluster][cpu] = val;
27         sync_cache_w(&mcpm_entry_vectors[cluster][cpu]);
28 }
29
30 extern unsigned long mcpm_entry_early_pokes[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER][2];
31
32 void mcpm_set_early_poke(unsigned cpu, unsigned cluster,
33                          unsigned long poke_phys_addr, unsigned long poke_val)
34 {
35         unsigned long *poke = &mcpm_entry_early_pokes[cluster][cpu][0];
36         poke[0] = poke_phys_addr;
37         poke[1] = poke_val;
38         __sync_cache_range_w(poke, 2 * sizeof(*poke));
39 }
40
41 static const struct mcpm_platform_ops *platform_ops;
42
43 int __init mcpm_platform_register(const struct mcpm_platform_ops *ops)
44 {
45         if (platform_ops)
46                 return -EBUSY;
47         platform_ops = ops;
48         return 0;
49 }
50
51 int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster)
52 {
53         if (!platform_ops)
54                 return -EUNATCH; /* try not to shadow power_up errors */
55         might_sleep();
56         return platform_ops->power_up(cpu, cluster);
57 }
58
59 typedef void (*phys_reset_t)(unsigned long);
60
61 void mcpm_cpu_power_down(void)
62 {
63         phys_reset_t phys_reset;
64
65         if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down))
66                 return;
67         BUG_ON(!irqs_disabled());
68
69         /*
70          * Do this before calling into the power_down method,
71          * as it might not always be safe to do afterwards.
72          */
73         setup_mm_for_reboot();
74
75         platform_ops->power_down();
76
77         /*
78          * It is possible for a power_up request to happen concurrently
79          * with a power_down request for the same CPU. In this case the
80          * power_down method might not be able to actually enter a
81          * powered down state with the WFI instruction if the power_up
82          * method has removed the required reset condition.  The
83          * power_down method is then allowed to return. We must perform
84          * a re-entry in the kernel as if the power_up method just had
85          * deasserted reset on the CPU.
86          *
87          * To simplify race issues, the platform specific implementation
88          * must accommodate for the possibility of unordered calls to
89          * power_down and power_up with a usage count. Therefore, if a
90          * call to power_up is issued for a CPU that is not down, then
91          * the next call to power_down must not attempt a full shutdown
92          * but only do the minimum (normally disabling L1 cache and CPU
93          * coherency) and return just as if a concurrent power_up request
94          * had happened as described above.
95          */
96
97         phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
98         phys_reset(virt_to_phys(mcpm_entry_point));
99
100         /* should never get here */
101         BUG();
102 }
103
104 int mcpm_cpu_power_down_finish(unsigned int cpu, unsigned int cluster)
105 {
106         int ret;
107
108         if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down_finish))
109                 return -EUNATCH;
110
111         ret = platform_ops->power_down_finish(cpu, cluster);
112         if (ret)
113                 pr_warn("%s: cpu %u, cluster %u failed to power down (%d)\n",
114                         __func__, cpu, cluster, ret);
115
116         return ret;
117 }
118
119 void mcpm_cpu_suspend(u64 expected_residency)
120 {
121         phys_reset_t phys_reset;
122
123         if (WARN_ON_ONCE(!platform_ops || !platform_ops->suspend))
124                 return;
125         BUG_ON(!irqs_disabled());
126
127         /* Very similar to mcpm_cpu_power_down() */
128         setup_mm_for_reboot();
129         platform_ops->suspend(expected_residency);
130         phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
131         phys_reset(virt_to_phys(mcpm_entry_point));
132         BUG();
133 }
134
135 int mcpm_cpu_powered_up(void)
136 {
137         if (!platform_ops)
138                 return -EUNATCH;
139         if (platform_ops->powered_up)
140                 platform_ops->powered_up();
141         return 0;
142 }
143
144 struct sync_struct mcpm_sync;
145
146 /*
147  * __mcpm_cpu_going_down: Indicates that the cpu is being torn down.
148  *    This must be called at the point of committing to teardown of a CPU.
149  *    The CPU cache (SCTRL.C bit) is expected to still be active.
150  */
151 void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster)
152 {
153         mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_GOING_DOWN;
154         sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu);
155 }
156
157 /*
158  * __mcpm_cpu_down: Indicates that cpu teardown is complete and that the
159  *    cluster can be torn down without disrupting this CPU.
160  *    To avoid deadlocks, this must be called before a CPU is powered down.
161  *    The CPU cache (SCTRL.C bit) is expected to be off.
162  *    However L2 cache might or might not be active.
163  */
164 void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster)
165 {
166         dmb();
167         mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_DOWN;
168         sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu);
169         sev();
170 }
171
172 /*
173  * __mcpm_outbound_leave_critical: Leave the cluster teardown critical section.
174  * @state: the final state of the cluster:
175  *     CLUSTER_UP: no destructive teardown was done and the cluster has been
176  *         restored to the previous state (CPU cache still active); or
177  *     CLUSTER_DOWN: the cluster has been torn-down, ready for power-off
178  *         (CPU cache disabled, L2 cache either enabled or disabled).
179  */
180 void __mcpm_outbound_leave_critical(unsigned int cluster, int state)
181 {
182         dmb();
183         mcpm_sync.clusters[cluster].cluster = state;
184         sync_cache_w(&mcpm_sync.clusters[cluster].cluster);
185         sev();
186 }
187
188 /*
189  * __mcpm_outbound_enter_critical: Enter the cluster teardown critical section.
190  * This function should be called by the last man, after local CPU teardown
191  * is complete.  CPU cache expected to be active.
192  *
193  * Returns:
194  *     false: the critical section was not entered because an inbound CPU was
195  *         observed, or the cluster is already being set up;
196  *     true: the critical section was entered: it is now safe to tear down the
197  *         cluster.
198  */
199 bool __mcpm_outbound_enter_critical(unsigned int cpu, unsigned int cluster)
200 {
201         unsigned int i;
202         struct mcpm_sync_struct *c = &mcpm_sync.clusters[cluster];
203
204         /* Warn inbound CPUs that the cluster is being torn down: */
205         c->cluster = CLUSTER_GOING_DOWN;
206         sync_cache_w(&c->cluster);
207
208         /* Back out if the inbound cluster is already in the critical region: */
209         sync_cache_r(&c->inbound);
210         if (c->inbound == INBOUND_COMING_UP)
211                 goto abort;
212
213         /*
214          * Wait for all CPUs to get out of the GOING_DOWN state, so that local
215          * teardown is complete on each CPU before tearing down the cluster.
216          *
217          * If any CPU has been woken up again from the DOWN state, then we
218          * shouldn't be taking the cluster down at all: abort in that case.
219          */
220         sync_cache_r(&c->cpus);
221         for (i = 0; i < MAX_CPUS_PER_CLUSTER; i++) {
222                 int cpustate;
223
224                 if (i == cpu)
225                         continue;
226
227                 while (1) {
228                         cpustate = c->cpus[i].cpu;
229                         if (cpustate != CPU_GOING_DOWN)
230                                 break;
231
232                         wfe();
233                         sync_cache_r(&c->cpus[i].cpu);
234                 }
235
236                 switch (cpustate) {
237                 case CPU_DOWN:
238                         continue;
239
240                 default:
241                         goto abort;
242                 }
243         }
244
245         return true;
246
247 abort:
248         __mcpm_outbound_leave_critical(cluster, CLUSTER_UP);
249         return false;
250 }
251
252 int __mcpm_cluster_state(unsigned int cluster)
253 {
254         sync_cache_r(&mcpm_sync.clusters[cluster].cluster);
255         return mcpm_sync.clusters[cluster].cluster;
256 }
257
258 extern unsigned long mcpm_power_up_setup_phys;
259
260 int __init mcpm_sync_init(
261         void (*power_up_setup)(unsigned int affinity_level))
262 {
263         unsigned int i, j, mpidr, this_cluster;
264
265         BUILD_BUG_ON(MCPM_SYNC_CLUSTER_SIZE * MAX_NR_CLUSTERS != sizeof mcpm_sync);
266         BUG_ON((unsigned long)&mcpm_sync & (__CACHE_WRITEBACK_GRANULE - 1));
267
268         /*
269          * Set initial CPU and cluster states.
270          * Only one cluster is assumed to be active at this point.
271          */
272         for (i = 0; i < MAX_NR_CLUSTERS; i++) {
273                 mcpm_sync.clusters[i].cluster = CLUSTER_DOWN;
274                 mcpm_sync.clusters[i].inbound = INBOUND_NOT_COMING_UP;
275                 for (j = 0; j < MAX_CPUS_PER_CLUSTER; j++)
276                         mcpm_sync.clusters[i].cpus[j].cpu = CPU_DOWN;
277         }
278         mpidr = read_cpuid_mpidr();
279         this_cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
280         for_each_online_cpu(i)
281                 mcpm_sync.clusters[this_cluster].cpus[i].cpu = CPU_UP;
282         mcpm_sync.clusters[this_cluster].cluster = CLUSTER_UP;
283         sync_cache_w(&mcpm_sync);
284
285         if (power_up_setup) {
286                 mcpm_power_up_setup_phys = virt_to_phys(power_up_setup);
287                 sync_cache_w(&mcpm_power_up_setup_phys);
288         }
289
290         return 0;
291 }