hwmon: (applesmc) Ignore some temperature registers
[pandora-kernel.git] / arch / arm / boot / dts / vexpress-v2m.dtsi
1 /*
2  * ARM Ltd. Versatile Express
3  *
4  * Motherboard Express uATX
5  * V2M-P1
6  *
7  * HBI-0190D
8  *
9  * Original memory map ("Legacy memory map" in the board's
10  * Technical Reference Manual)
11  *
12  * WARNING! The hardware described in this file is independent from the
13  * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
14  * correspondence between the two configurations.
15  *
16  * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
17  * CHANGES TO vexpress-v2m-rs1.dtsi!
18  */
19
20 / {
21         aliases {
22                 arm,v2m_timer = &v2m_timer01;
23         };
24
25         motherboard {
26                 compatible = "simple-bus";
27                 #address-cells = <2>; /* SMB chipselect number and offset */
28                 #size-cells = <1>;
29                 #interrupt-cells = <1>;
30
31                 flash@0,00000000 {
32                         compatible = "arm,vexpress-flash", "cfi-flash";
33                         reg = <0 0x00000000 0x04000000>,
34                               <1 0x00000000 0x04000000>;
35                         bank-width = <4>;
36                 };
37
38                 psram@2,00000000 {
39                         compatible = "arm,vexpress-psram", "mtd-ram";
40                         reg = <2 0x00000000 0x02000000>;
41                         bank-width = <4>;
42                 };
43
44                 vram@3,00000000 {
45                         compatible = "arm,vexpress-vram";
46                         reg = <3 0x00000000 0x00800000>;
47                 };
48
49                 ethernet@3,02000000 {
50                         compatible = "smsc,lan9118", "smsc,lan9115";
51                         reg = <3 0x02000000 0x10000>;
52                         interrupts = <15>;
53                         phy-mode = "mii";
54                         reg-io-width = <4>;
55                         smsc,irq-active-high;
56                         smsc,irq-push-pull;
57                 };
58
59                 usb@3,03000000 {
60                         compatible = "nxp,usb-isp1761";
61                         reg = <3 0x03000000 0x20000>;
62                         interrupts = <16>;
63                         port1-otg;
64                 };
65
66                 iofpga@7,00000000 {
67                         compatible = "arm,amba-bus", "simple-bus";
68                         #address-cells = <1>;
69                         #size-cells = <1>;
70                         ranges = <0 7 0 0x20000>;
71
72                         sysreg@00000 {
73                                 compatible = "arm,vexpress-sysreg";
74                                 reg = <0x00000 0x1000>;
75                         };
76
77                         sysctl@01000 {
78                                 compatible = "arm,sp810", "arm,primecell";
79                                 reg = <0x01000 0x1000>;
80                         };
81
82                         /* PCI-E I2C bus */
83                         v2m_i2c_pcie: i2c@02000 {
84                                 compatible = "arm,versatile-i2c";
85                                 reg = <0x02000 0x1000>;
86
87                                 #address-cells = <1>;
88                                 #size-cells = <0>;
89
90                                 pcie-switch@60 {
91                                         compatible = "idt,89hpes32h8";
92                                         reg = <0x60>;
93                                 };
94                         };
95
96                         aaci@04000 {
97                                 compatible = "arm,pl041", "arm,primecell";
98                                 reg = <0x04000 0x1000>;
99                                 interrupts = <11>;
100                         };
101
102                         mmci@05000 {
103                                 compatible = "arm,pl180", "arm,primecell";
104                                 reg = <0x05000 0x1000>;
105                                 interrupts = <9 10>;
106                         };
107
108                         kmi@06000 {
109                                 compatible = "arm,pl050", "arm,primecell";
110                                 reg = <0x06000 0x1000>;
111                                 interrupts = <12>;
112                         };
113
114                         kmi@07000 {
115                                 compatible = "arm,pl050", "arm,primecell";
116                                 reg = <0x07000 0x1000>;
117                                 interrupts = <13>;
118                         };
119
120                         v2m_serial0: uart@09000 {
121                                 compatible = "arm,pl011", "arm,primecell";
122                                 reg = <0x09000 0x1000>;
123                                 interrupts = <5>;
124                         };
125
126                         v2m_serial1: uart@0a000 {
127                                 compatible = "arm,pl011", "arm,primecell";
128                                 reg = <0x0a000 0x1000>;
129                                 interrupts = <6>;
130                         };
131
132                         v2m_serial2: uart@0b000 {
133                                 compatible = "arm,pl011", "arm,primecell";
134                                 reg = <0x0b000 0x1000>;
135                                 interrupts = <7>;
136                         };
137
138                         v2m_serial3: uart@0c000 {
139                                 compatible = "arm,pl011", "arm,primecell";
140                                 reg = <0x0c000 0x1000>;
141                                 interrupts = <8>;
142                         };
143
144                         wdt@0f000 {
145                                 compatible = "arm,sp805", "arm,primecell";
146                                 reg = <0x0f000 0x1000>;
147                                 interrupts = <0>;
148                         };
149
150                         v2m_timer01: timer@11000 {
151                                 compatible = "arm,sp804", "arm,primecell";
152                                 reg = <0x11000 0x1000>;
153                                 interrupts = <2>;
154                         };
155
156                         v2m_timer23: timer@12000 {
157                                 compatible = "arm,sp804", "arm,primecell";
158                                 reg = <0x12000 0x1000>;
159                         };
160
161                         /* DVI I2C bus */
162                         v2m_i2c_dvi: i2c@16000 {
163                                 compatible = "arm,versatile-i2c";
164                                 reg = <0x16000 0x1000>;
165
166                                 #address-cells = <1>;
167                                 #size-cells = <0>;
168
169                                 dvi-transmitter@39 {
170                                         compatible = "sil,sii9022-tpi", "sil,sii9022";
171                                         reg = <0x39>;
172                                 };
173
174                                 dvi-transmitter@60 {
175                                         compatible = "sil,sii9022-cpi", "sil,sii9022";
176                                         reg = <0x60>;
177                                 };
178                         };
179
180                         rtc@17000 {
181                                 compatible = "arm,pl031", "arm,primecell";
182                                 reg = <0x17000 0x1000>;
183                                 interrupts = <4>;
184                         };
185
186                         compact-flash@1a000 {
187                                 compatible = "arm,vexpress-cf", "ata-generic";
188                                 reg = <0x1a000 0x100
189                                        0x1a100 0xf00>;
190                                 reg-shift = <2>;
191                         };
192
193                         clcd@1f000 {
194                                 compatible = "arm,pl111", "arm,primecell";
195                                 reg = <0x1f000 0x1000>;
196                                 interrupts = <14>;
197                         };
198                 };
199         };
200 };