arch/arm/boot/dts/stih415-pinctrl.dtsi

   1 /*
   2  * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
   3  * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 as
   7  * publishhed by the Free Software Foundation.
   8  */
   9 #include "st-pincfg.h"
  10 #include <dt-bindings/interrupt-controller/arm-gic.h>
  11 / {
  12
  13         aliases {
  14                 gpio0   = &PIO0;
  15                 gpio1   = &PIO1;
  16                 gpio2   = &PIO2;
  17                 gpio3   = &PIO3;
  18                 gpio4   = &PIO4;
  19                 gpio5   = &PIO5;
  20                 gpio6   = &PIO6;
  21                 gpio7   = &PIO7;
  22                 gpio8   = &PIO8;
  23                 gpio9   = &PIO9;
  24                 gpio10  = &PIO10;
  25                 gpio11  = &PIO11;
  26                 gpio12  = &PIO12;
  27                 gpio13  = &PIO13;
  28                 gpio14  = &PIO14;
  29                 gpio15  = &PIO15;
  30                 gpio16  = &PIO16;
  31                 gpio17  = &PIO17;
  32                 gpio18  = &PIO18;
  33                 gpio19  = &PIO100;
  34                 gpio20  = &PIO101;
  35                 gpio21  = &PIO102;
  36                 gpio22  = &PIO103;
  37                 gpio23  = &PIO104;
  38                 gpio24  = &PIO105;
  39                 gpio25  = &PIO106;
  40                 gpio26  = &PIO107;
  41         };
  42
  43         soc {
  44                 pin-controller-sbc {
  45                         #address-cells  = <1>;
  46                         #size-cells     = <1>;
  47                         compatible      = "st,stih415-sbc-pinctrl";
  48                         st,syscfg       = <&syscfg_sbc>;
  49                         reg             = <0xfe61f080 0x4>;
  50                         reg-names       = "irqmux";
  51                         interrupts      = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
  52                         interrupts-names = "irqmux";
  53                         ranges          = <0 0xfe610000 0x5000>;
  54
  55                         PIO0: gpio@fe610000 {
  56                                 gpio-controller;
  57                                 #gpio-cells     = <1>;
  58                                 interrupt-controller;
  59                                 #interrupt-cells = <2>;
  60                                 reg             = <0 0x100>;
  61                                 st,bank-name    = "PIO0";
  62                         };
  63                         PIO1: gpio@fe611000 {
  64                                 gpio-controller;
  65                                 #gpio-cells     = <1>;
  66                                 interrupt-controller;
  67                                 #interrupt-cells = <2>;
  68                                 reg             = <0x1000 0x100>;
  69                                 st,bank-name    = "PIO1";
  70                         };
  71                         PIO2: gpio@fe612000 {
  72                                 gpio-controller;
  73                                 #gpio-cells     = <1>;
  74                                 interrupt-controller;
  75                                 #interrupt-cells = <2>;
  76                                 reg             = <0x2000 0x100>;
  77                                 st,bank-name    = "PIO2";
  78                         };
  79                         PIO3: gpio@fe613000 {
  80                                 gpio-controller;
  81                                 #gpio-cells     = <1>;
  82                                 interrupt-controller;
  83                                 #interrupt-cells = <2>;
  84                                 reg             = <0x3000 0x100>;
  85                                 st,bank-name    = "PIO3";
  86                         };
  87                         PIO4: gpio@fe614000 {
  88                                 gpio-controller;
  89                                 #gpio-cells     = <1>;
  90                                 interrupt-controller;
  91                                 #interrupt-cells = <2>;
  92                                 reg             = <0x4000 0x100>;
  93                                 st,bank-name    = "PIO4";
  94                         };
  95
  96                         sbc_serial1 {
  97                                 pinctrl_sbc_serial1:sbc_serial1 {
  98                                         st,pins {
  99                                                 tx      = <&PIO2 6 ALT3 OUT>;
 100                                                 rx      = <&PIO2 7 ALT3 IN>;
 101                                         };
 102                                 };
 103                         };
 104
 105                         sbc_i2c0 {
 106                                 pinctrl_sbc_i2c0_default: sbc_i2c0-default {
 107                                         st,pins {
 108                                                 sda = <&PIO4 6 ALT1 BIDIR>;
 109                                                 scl = <&PIO4 5 ALT1 BIDIR>;
 110                                         };
 111                                 };
 112                         };
 113
 114                         sbc_i2c1 {
 115                                 pinctrl_sbc_i2c1_default: sbc_i2c1-default {
 116                                         st,pins {
 117                                                 sda = <&PIO3 2 ALT2 BIDIR>;
 118                                                 scl = <&PIO3 1 ALT2 BIDIR>;
 119                                         };
 120                                 };
 121                         };
 122
 123                         rc{
 124                                 pinctrl_ir: ir0 {
 125                                         st,pins {
 126                                                 ir = <&PIO4 0 ALT2 IN>;
 127                                         };
 128                                 };
 129                         };
 130
 131                         gmac1 {
 132                                 pinctrl_mii1: mii1 {
 133                                                 st,pins {
 134                                                  txd0   = <&PIO0 0 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
 135                                                  txd1   = <&PIO0 1 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
 136                                                  txd2   = <&PIO0 2 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
 137                                                  txd3   = <&PIO0 3 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
 138                                                  txer   = <&PIO0 4 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
 139                                                  txen   = <&PIO0 5 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
 140                                                  txclk  = <&PIO0 6 ALT1 IN   NICLK      0       CLK_A>;
 141                                                  col    = <&PIO0 7 ALT1 IN   BYPASS     1000>;
 142                                                  mdio   = <&PIO1 0 ALT1 OUT  BYPASS     0>;
 143                                                  mdc    = <&PIO1 1 ALT1 OUT  NICLK      0       CLK_A>;
 144                                                  crs    = <&PIO1 2 ALT1 IN   BYPASS     1000>;
 145                                                  mdint  = <&PIO1 3 ALT1 IN   BYPASS     0>;
 146                                                  rxd0   = <&PIO1 4 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
 147                                                  rxd1   = <&PIO1 5 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
 148                                                  rxd2   = <&PIO1 6 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
 149                                                  rxd3   = <&PIO1 7 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
 150                                                  rxdv   = <&PIO2 0 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
 151                                                  rx_er  = <&PIO2 1 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
 152                                                  rxclk  = <&PIO2 2 ALT1 IN   NICLK      0       CLK_A>;
 153                                                  phyclk = <&PIO2 3 ALT1 IN   NICLK      1000    CLK_A>;
 154                                         };
 155                                 };
 156
 157                                 pinctrl_rgmii1: rgmii1-0 {
 158                                         st,pins {
 159                                                  txd0 =  <&PIO0 0 ALT1 OUT DE_IO        1000    CLK_A>;
 160                                                  txd1 =  <&PIO0 1 ALT1 OUT DE_IO        1000    CLK_A>;
 161                                                  txd2 =  <&PIO0 2 ALT1 OUT DE_IO        1000    CLK_A>;
 162                                                  txd3 =  <&PIO0 3 ALT1 OUT DE_IO        1000    CLK_A>;
 163                                                  txen =  <&PIO0 5 ALT1 OUT DE_IO        0       CLK_A>;
 164                                                  txclk = <&PIO0 6 ALT1 IN       NICLK   0       CLK_A>;
 165                                                  mdio =  <&PIO1 0 ALT1 OUT      BYPASS  0>;
 166                                                  mdc =   <&PIO1 1 ALT1 OUT      NICLK   0       CLK_A>;
 167                                                  rxd0 =  <&PIO1 4 ALT1 IN DE_IO 0       CLK_A>;
 168                                                  rxd1 =  <&PIO1 5 ALT1 IN DE_IO 0       CLK_A>;
 169                                                  rxd2 =  <&PIO1 6 ALT1 IN DE_IO 0       CLK_A>;
 170                                                  rxd3 =  <&PIO1 7 ALT1 IN DE_IO 0       CLK_A>;
 171
 172                                                  rxdv =   <&PIO2 0 ALT1 IN DE_IO        500     CLK_A>;
 173                                                  rxclk =  <&PIO2 2 ALT1 IN      NICLK   0       CLK_A>;
 174                                                  phyclk = <&PIO2 3 ALT4 OUT     NICLK   0       CLK_B>;
 175
 176                                                  clk125= <&PIO3 7 ALT4 IN       NICLK   0       CLK_A>;
 177                                         };
 178                                 };
 179                         };
 180                 };
 181
 182                 pin-controller-front {
 183                         #address-cells  = <1>;
 184                         #size-cells     = <1>;
 185                         compatible      = "st,stih415-front-pinctrl";
 186                         st,syscfg       = <&syscfg_front>;
 187                         reg             = <0xfee0f080 0x4>;
 188                         reg-names       = "irqmux";
 189                         interrupts      = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
 190                         interrupts-names = "irqmux";
 191                         ranges          = <0 0xfee00000 0x8000>;
 192
 193                         PIO5: gpio@fee00000 {
 194                                 gpio-controller;
 195                                 #gpio-cells     = <1>;
 196                                 interrupt-controller;
 197                                 #interrupt-cells = <2>;
 198                                 reg             = <0 0x100>;
 199                                 st,bank-name    = "PIO5";
 200                         };
 201                         PIO6: gpio@fee01000 {
 202                                 gpio-controller;
 203                                 #gpio-cells     = <1>;
 204                                 interrupt-controller;
 205                                 #interrupt-cells = <2>;
 206                                 reg             = <0x1000 0x100>;
 207                                 st,bank-name    = "PIO6";
 208                         };
 209                         PIO7: gpio@fee02000 {
 210                                 gpio-controller;
 211                                 #gpio-cells     = <1>;
 212                                 interrupt-controller;
 213                                 #interrupt-cells = <2>;
 214                                 reg             = <0x2000 0x100>;
 215                                 st,bank-name    = "PIO7";
 216                         };
 217                         PIO8: gpio@fee03000 {
 218                                 gpio-controller;
 219                                 #gpio-cells     = <1>;
 220                                 interrupt-controller;
 221                                 #interrupt-cells = <2>;
 222                                 reg             = <0x3000 0x100>;
 223                                 st,bank-name    = "PIO8";
 224                         };
 225                         PIO9: gpio@fee04000 {
 226                                 gpio-controller;
 227                                 #gpio-cells     = <1>;
 228                                 interrupt-controller;
 229                                 #interrupt-cells = <2>;
 230                                 reg             = <0x4000 0x100>;
 231                                 st,bank-name    = "PIO9";
 232                         };
 233                         PIO10: gpio@fee05000 {
 234                                 gpio-controller;
 235                                 #gpio-cells     = <1>;
 236                                 interrupt-controller;
 237                                 #interrupt-cells = <2>;
 238                                 reg             = <0x5000 0x100>;
 239                                 st,bank-name    = "PIO10";
 240                         };
 241                         PIO11: gpio@fee06000 {
 242                                 gpio-controller;
 243                                 #gpio-cells     = <1>;
 244                                 interrupt-controller;
 245                                 #interrupt-cells = <2>;
 246                                 reg             = <0x6000 0x100>;
 247                                 st,bank-name    = "PIO11";
 248                         };
 249                         PIO12: gpio@fee07000 {
 250                                 gpio-controller;
 251                                 #gpio-cells     = <1>;
 252                                 interrupt-controller;
 253                                 #interrupt-cells = <2>;
 254                                 reg             = <0x7000 0x100>;
 255                                 st,bank-name    = "PIO12";
 256                         };
 257
 258                         i2c0 {
 259                                 pinctrl_i2c0_default: i2c0-default {
 260                                         st,pins {
 261                                                 sda = <&PIO9 3 ALT1 BIDIR>;
 262                                                 scl = <&PIO9 2 ALT1 BIDIR>;
 263                                         };
 264                                 };
 265                         };
 266
 267                         i2c1 {
 268                                 pinctrl_i2c1_default: i2c1-default {
 269                                         st,pins {
 270                                                 sda = <&PIO12 1 ALT1 BIDIR>;
 271                                                 scl = <&PIO12 0 ALT1 BIDIR>;
 272                                         };
 273                                 };
 274                         };
 275                 };
 276
 277                 pin-controller-rear {
 278                         #address-cells  = <1>;
 279                         #size-cells     = <1>;
 280                         compatible      = "st,stih415-rear-pinctrl";
 281                         st,syscfg       = <&syscfg_rear>;
 282                         reg             = <0xfe82f080 0x4>;
 283                         reg-names       = "irqmux";
 284                         interrupts      = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
 285                         interrupts-names = "irqmux";
 286                         ranges          = <0 0xfe820000 0x8000>;
 287
 288                         PIO13: gpio@fe820000 {
 289                                 gpio-controller;
 290                                 #gpio-cells     = <1>;
 291                                 interrupt-controller;
 292                                 #interrupt-cells = <2>;
 293                                 reg             = <0 0x100>;
 294                                 st,bank-name    = "PIO13";
 295                         };
 296                         PIO14: gpio@fe821000 {
 297                                 gpio-controller;
 298                                 #gpio-cells     = <1>;
 299                                 interrupt-controller;
 300                                 #interrupt-cells = <2>;
 301                                 reg             = <0x1000 0x100>;
 302                                 st,bank-name    = "PIO14";
 303                         };
 304                         PIO15: gpio@fe822000 {
 305                                 gpio-controller;
 306                                 #gpio-cells     = <1>;
 307                                 interrupt-controller;
 308                                 #interrupt-cells = <2>;
 309                                 reg             = <0x2000 0x100>;
 310                                 st,bank-name    = "PIO15";
 311                         };
 312                         PIO16: gpio@fe823000 {
 313                                 gpio-controller;
 314                                 #gpio-cells     = <1>;
 315                                 interrupt-controller;
 316                                 #interrupt-cells = <2>;
 317                                 reg             = <0x3000 0x100>;
 318                                 st,bank-name    = "PIO16";
 319                         };
 320                         PIO17: gpio@fe824000 {
 321                                 gpio-controller;
 322                                 #gpio-cells     = <1>;
 323                                 interrupt-controller;
 324                                 #interrupt-cells = <2>;
 325                                 reg             = <0x4000 0x100>;
 326                                 st,bank-name    = "PIO17";
 327                         };
 328                         PIO18: gpio@fe825000 {
 329                                 gpio-controller;
 330                                 #gpio-cells     = <1>;
 331                                 interrupt-controller;
 332                                 #interrupt-cells = <2>;
 333                                 reg             = <0x5000 0x100>;
 334                                 st,bank-name    = "PIO18";
 335                         };
 336
 337                         serial2 {
 338                                 pinctrl_serial2: serial2-0 {
 339                                         st,pins {
 340                                                 tx      = <&PIO17 4 ALT2 OUT>;
 341                                                 rx      = <&PIO17 5 ALT2 IN>;
 342                                         };
 343                                 };
 344                         };
 345
 346                         gmac0{
 347                                 pinctrl_mii0: mii0 {
 348                                         st,pins {
 349                                          mdint =        <&PIO13 6 ALT2  IN      BYPASS          0>;
 350                                          txen =         <&PIO13 7 ALT2  OUT     SE_NICLK_IO     0       CLK_A>;
 351
 352                                          txd0 =         <&PIO14 0 ALT2  OUT     SE_NICLK_IO     0       CLK_A>;
 353                                          txd1 =         <&PIO14 1 ALT2  OUT     SE_NICLK_IO     0       CLK_A>;
 354                                          txd2 =         <&PIO14 2 ALT2  OUT     SE_NICLK_IO     0       CLK_B>;
 355                                          txd3 =         <&PIO14 3 ALT2  OUT     SE_NICLK_IO     0       CLK_B>;
 356
 357                                          txclk =        <&PIO15 0 ALT2  IN      NICLK           0       CLK_A>;
 358                                          txer =         <&PIO15 1 ALT2  OUT     SE_NICLK_IO     0       CLK_A>;
 359                                          crs =          <&PIO15 2 ALT2  IN      BYPASS          1000>;
 360                                          col =          <&PIO15 3 ALT2  IN      BYPASS          1000>;
 361                                          mdio  =        <&PIO15 4 ALT2  OUT     BYPASS  3000>;
 362                                          mdc   =        <&PIO15 5 ALT2  OUT     NICLK   0       CLK_B>;
 363
 364                                          rxd0 =         <&PIO16 0 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
 365                                          rxd1 =         <&PIO16 1 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
 366                                          rxd2 =         <&PIO16 2 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
 367                                          rxd3 =         <&PIO16 3 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
 368                                          rxdv =         <&PIO15 6 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
 369                                          rx_er =        <&PIO15 7 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
 370                                          rxclk =        <&PIO17 0 ALT2  IN      NICLK           0       CLK_A>;
 371                                          phyclk =       <&PIO13 5 ALT2  OUT     NICLK   1000    CLK_A>;
 372
 373                                         };
 374                                 };
 375
 376                         pinctrl_gmii0: gmii0 {
 377                                 st,pins {
 378                                          mdint =        <&PIO13 6       ALT2 IN         BYPASS  0>;
 379                                          mdio  =        <&PIO15 4       ALT2 OUT        BYPASS  3000>;
 380                                          mdc   =        <&PIO15 5       ALT2 OUT        NICLK   0       CLK_B>;
 381                                          txen =         <&PIO13 7       ALT2 OUT        SE_NICLK_IO     3000    CLK_A>;
 382
 383                                          txd0 =         <&PIO14 0       ALT2 OUT        SE_NICLK_IO     3000    CLK_A>;
 384                                          txd1 =         <&PIO14 1       ALT2 OUT        SE_NICLK_IO     3000    CLK_A>;
 385                                          txd2 =         <&PIO14 2       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
 386                                          txd3 =         <&PIO14 3       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
 387                                          txd4 =         <&PIO14 4       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
 388                                          txd5 =         <&PIO14 5       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
 389                                          txd6 =         <&PIO14 6       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
 390                                          txd7 =         <&PIO14 7       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
 391
 392                                          txclk =        <&PIO15 0       ALT2 IN         NICLK   0       CLK_A>;
 393                                          txer =         <&PIO15 1       ALT2 OUT        SE_NICLK_IO     3000    CLK_A>;
 394                                          crs =          <&PIO15 2       ALT2 IN         BYPASS  1000>;
 395                                          col =          <&PIO15 3       ALT2 IN         BYPASS  1000>;
 396                                          rxdv =         <&PIO15 6       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 397                                          rx_er =        <&PIO15 7       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 398
 399                                          rxd0 =         <&PIO16 0       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 400                                          rxd1 =         <&PIO16 1       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 401                                          rxd2 =         <&PIO16 2       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 402                                          rxd3 =         <&PIO16 3       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 403                                          rxd4 =         <&PIO16 4       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 404                                          rxd5 =         <&PIO16 5       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 405                                          rxd6 =         <&PIO16 6       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 406                                          rxd7 =         <&PIO16 7       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 407
 408                                          rxclk =        <&PIO17 0       ALT2 IN NICLK   0       CLK_A>;
 409                                          clk125 =       <&PIO17 6       ALT1 IN NICLK   0       CLK_A>;
 410                                          phyclk =       <&PIO13 5       ALT4 OUT NICLK   0       CLK_B>;
 411
 412
 413                                         };
 414                                 };
 415                         };
 416                 };
 417
 418                 pin-controller-left {
 419                         #address-cells  = <1>;
 420                         #size-cells     = <1>;
 421                         compatible      = "st,stih415-left-pinctrl";
 422                         st,syscfg       = <&syscfg_left>;
 423                         reg             = <0xfd6bf080 0x4>;
 424                         reg-names       = "irqmux";
 425                         interrupts      = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 426                         interrupts-names = "irqmux";
 427                         ranges          = <0 0xfd6b0000 0x3000>;
 428
 429                         PIO100: gpio@fd6b0000 {
 430                                 gpio-controller;
 431                                 #gpio-cells     = <1>;
 432                                 interrupt-controller;
 433                                 #interrupt-cells = <2>;
 434                                 reg             = <0 0x100>;
 435                                 st,bank-name    = "PIO100";
 436                         };
 437                         PIO101: gpio@fd6b1000 {
 438                                 gpio-controller;
 439                                 #gpio-cells     = <1>;
 440                                 interrupt-controller;
 441                                 #interrupt-cells = <2>;
 442                                 reg             = <0x1000 0x100>;
 443                                 st,bank-name    = "PIO101";
 444                         };
 445                         PIO102: gpio@fd6b2000 {
 446                                 gpio-controller;
 447                                 #gpio-cells     = <1>;
 448                                 interrupt-controller;
 449                                 #interrupt-cells = <2>;
 450                                 reg             = <0x2000 0x100>;
 451                                 st,bank-name    = "PIO102";
 452                         };
 453                 };
 454
 455                 pin-controller-right {
 456                         #address-cells  = <1>;
 457                         #size-cells     = <1>;
 458                         compatible      = "st,stih415-right-pinctrl";
 459                         st,syscfg       = <&syscfg_right>;
 460                         reg             = <0xfd33f080 0x4>;
 461                         reg-names       = "irqmux";
 462                         interrupts      = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 463                         interrupts-names = "irqmux";
 464                         ranges          = <0 0xfd330000 0x5000>;
 465
 466                         PIO103: gpio@fd330000 {
 467                                 gpio-controller;
 468                                 #gpio-cells     = <1>;
 469                                 interrupt-controller;
 470                                 #interrupt-cells = <2>;
 471                                 reg             = <0 0x100>;
 472                                 st,bank-name    = "PIO103";
 473                         };
 474                         PIO104: gpio@fd331000 {
 475                                 gpio-controller;
 476                                 #gpio-cells     = <1>;
 477                                 interrupt-controller;
 478                                 #interrupt-cells = <2>;
 479                                 reg             = <0x1000 0x100>;
 480                                 st,bank-name    = "PIO104";
 481                         };
 482                         PIO105: gpio@fd332000 {
 483                                 gpio-controller;
 484                                 #gpio-cells     = <1>;
 485                                 interrupt-controller;
 486                                 #interrupt-cells = <2>;
 487                                 reg             = <0x2000 0x100>;
 488                                 st,bank-name    = "PIO105";
 489                         };
 490                         PIO106: gpio@fd333000 {
 491                                 gpio-controller;
 492                                 #gpio-cells     = <1>;
 493                                 interrupt-controller;
 494                                 #interrupt-cells = <2>;
 495                                 reg             = <0x3000 0x100>;
 496                                 st,bank-name    = "PIO106";
 497                         };
 498                         PIO107: gpio@fd334000 {
 499                                 gpio-controller;
 500                                 #gpio-cells     = <1>;
 501                                 interrupt-controller;
 502                                 #interrupt-cells = <2>;
 503                                 reg             = <0x4000 0x100>;
 504                                 st,bank-name    = "PIO107";
 505                         };
 506                 };
 507         };
 508 };