arch/arm/boot/dts/am335x-bone-common.dtsi

   1 /*
   2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 / {
  10         model = "TI AM335x BeagleBone";
  11         compatible = "ti,am335x-bone", "ti,am33xx";
  12
  13         cpus {
  14                 cpu@0 {
  15                         cpu0-supply = <&dcdc2_reg>;
  16                 };
  17         };
  18
  19         memory {
  20                 device_type = "memory";
  21                 reg = <0x80000000 0x10000000>; /* 256 MB */
  22         };
  23
  24         am33xx_pinmux: pinmux@44e10800 {
  25                 pinctrl-names = "default";
  26                 pinctrl-0 = <&clkout2_pin>;
  27
  28                 user_leds_s0: user_leds_s0 {
  29                         pinctrl-single,pins = <
  30                                 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a5.gpio1_21 */
  31                                 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)    /* gpmc_a6.gpio1_22 */
  32                                 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a7.gpio1_23 */
  33                                 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)    /* gpmc_a8.gpio1_24 */
  34                         >;
  35                 };
  36
  37                 i2c0_pins: pinmux_i2c0_pins {
  38                         pinctrl-single,pins = <
  39                                 0x188 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_sda.i2c0_sda */
  40                                 0x18c (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_scl.i2c0_scl */
  41                         >;
  42                 };
  43
  44                 uart0_pins: pinmux_uart0_pins {
  45                         pinctrl-single,pins = <
  46                                 0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
  47                                 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
  48                         >;
  49                 };
  50
  51                 clkout2_pin: pinmux_clkout2_pin {
  52                         pinctrl-single,pins = <
  53                                 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
  54                         >;
  55                 };
  56
  57                 cpsw_default: cpsw_default {
  58                         pinctrl-single,pins = <
  59                                 /* Slave 1 */
  60                                 0x110 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxerr.mii1_rxerr */
  61                                 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
  62                                 0x118 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxdv.mii1_rxdv */
  63                                 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
  64                                 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
  65                                 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
  66                                 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
  67                                 0x12c (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_txclk.mii1_txclk */
  68                                 0x130 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxclk.mii1_rxclk */
  69                                 0x134 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxd3.mii1_rxd3 */
  70                                 0x138 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxd2.mii1_rxd2 */
  71                                 0x13c (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxd1.mii1_rxd1 */
  72                                 0x140 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxd0.mii1_rxd0 */
  73                         >;
  74                 };
  75
  76                 cpsw_sleep: cpsw_sleep {
  77                         pinctrl-single,pins = <
  78                                 /* Slave 1 reset value */
  79                                 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
  80                                 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
  81                                 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
  82                                 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
  83                                 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
  84                                 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
  85                                 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
  86                                 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
  87                                 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
  88                                 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
  89                                 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
  90                                 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
  91                                 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
  92                         >;
  93                 };
  94
  95                 davinci_mdio_default: davinci_mdio_default {
  96                         pinctrl-single,pins = <
  97                                 /* MDIO */
  98                                 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /* mdio_data.mdio_data */
  99                                 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)                   /* mdio_clk.mdio_clk */
 100                         >;
 101                 };
 102
 103                 davinci_mdio_sleep: davinci_mdio_sleep {
 104                         pinctrl-single,pins = <
 105                                 /* MDIO reset value */
 106                                 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 107                                 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 108                         >;
 109                 };
 110
 111                 mmc1_pins: pinmux_mmc1_pins {
 112                         pinctrl-single,pins = <
 113                                 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
 114                         >;
 115                 };
 116
 117                 emmc_pins: pinmux_emmc_pins {
 118                         pinctrl-single,pins = <
 119                                 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
 120                                 0x84 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_csn2.mmc1_cmd */
 121                                 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
 122                                 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
 123                                 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
 124                                 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
 125                                 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
 126                                 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
 127                                 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
 128                                 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
 129                         >;
 130                 };
 131         };
 132
 133         ocp {
 134                 uart0: serial@44e09000 {
 135                         pinctrl-names = "default";
 136                         pinctrl-0 = <&uart0_pins>;
 137
 138                         status = "okay";
 139                 };
 140
 141                 musb: usb@47400000 {
 142                         status = "okay";
 143
 144                         control@44e10000 {
 145                                 status = "okay";
 146                         };
 147
 148                         usb-phy@47401300 {
 149                                 status = "okay";
 150                         };
 151
 152                         usb-phy@47401b00 {
 153                                 status = "okay";
 154                         };
 155
 156                         usb@47401000 {
 157                                 status = "okay";
 158                         };
 159
 160                         usb@47401800 {
 161                                 status = "okay";
 162                                 dr_mode = "host";
 163                         };
 164
 165                         dma-controller@07402000  {
 166                                 status = "okay";
 167                         };
 168                 };
 169
 170                 i2c0: i2c@44e0b000 {
 171                         pinctrl-names = "default";
 172                         pinctrl-0 = <&i2c0_pins>;
 173
 174                         status = "okay";
 175                         clock-frequency = <400000>;
 176
 177                         tps: tps@24 {
 178                                 reg = <0x24>;
 179                         };
 180
 181                 };
 182         };
 183
 184         leds {
 185                 pinctrl-names = "default";
 186                 pinctrl-0 = <&user_leds_s0>;
 187
 188                 compatible = "gpio-leds";
 189
 190                 led@2 {
 191                         label = "beaglebone:green:heartbeat";
 192                         gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 193                         linux,default-trigger = "heartbeat";
 194                         default-state = "off";
 195                 };
 196
 197                 led@3 {
 198                         label = "beaglebone:green:mmc0";
 199                         gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 200                         linux,default-trigger = "mmc0";
 201                         default-state = "off";
 202                 };
 203
 204                 led@4 {
 205                         label = "beaglebone:green:usr2";
 206                         gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 207                         default-state = "off";
 208                 };
 209
 210                 led@5 {
 211                         label = "beaglebone:green:usr3";
 212                         gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 213                         default-state = "off";
 214                 };
 215         };
 216 };
 217
 218 /include/ "tps65217.dtsi"
 219
 220 &tps {
 221         regulators {
 222                 dcdc1_reg: regulator@0 {
 223                         regulator-always-on;
 224                 };
 225
 226                 dcdc2_reg: regulator@1 {
 227                         /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 228                         regulator-name = "vdd_mpu";
 229                         regulator-min-microvolt = <925000>;
 230                         regulator-max-microvolt = <1325000>;
 231                         regulator-boot-on;
 232                         regulator-always-on;
 233                 };
 234
 235                 dcdc3_reg: regulator@2 {
 236                         /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 237                         regulator-name = "vdd_core";
 238                         regulator-min-microvolt = <925000>;
 239                         regulator-max-microvolt = <1150000>;
 240                         regulator-boot-on;
 241                         regulator-always-on;
 242                 };
 243
 244                 ldo1_reg: regulator@3 {
 245                         regulator-always-on;
 246                 };
 247
 248                 ldo2_reg: regulator@4 {
 249                         regulator-always-on;
 250                 };
 251
 252                 ldo3_reg: regulator@5 {
 253                         regulator-always-on;
 254                 };
 255
 256                 ldo4_reg: regulator@6 {
 257                         regulator-always-on;
 258                 };
 259         };
 260
 261         vmmcsd_fixed: fixedregulator@0 {
 262                 compatible = "regulator-fixed";
 263                 regulator-name = "vmmcsd_fixed";
 264                 regulator-min-microvolt = <3300000>;
 265                 regulator-max-microvolt = <3300000>;
 266         };
 267 };
 268
 269 &cpsw_emac0 {
 270         phy_id = <&davinci_mdio>, <0>;
 271         phy-mode = "mii";
 272 };
 273
 274 &cpsw_emac1 {
 275         phy_id = <&davinci_mdio>, <1>;
 276         phy-mode = "mii";
 277 };
 278
 279 &mac {
 280         pinctrl-names = "default", "sleep";
 281         pinctrl-0 = <&cpsw_default>;
 282         pinctrl-1 = <&cpsw_sleep>;
 283
 284 };
 285
 286 &davinci_mdio {
 287         pinctrl-names = "default", "sleep";
 288         pinctrl-0 = <&davinci_mdio_default>;
 289         pinctrl-1 = <&davinci_mdio_sleep>;
 290 };
 291
 292 &mmc1 {
 293         status = "okay";
 294         pinctrl-names = "default";
 295         pinctrl-0 = <&mmc1_pins>;
 296         cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 297         cd-inverted;
 298 };