1 README file for the dc395x SCSI driver
2 ==========================================
6 The driver has been tested with CD-R and CD-R/W drives. These should
7 be safe to use. Testing with hard disks has not been done to any
8 great degree and caution should be exercised if you want to attempt
9 to use this driver with hard disks.
11 This is a 2.5 only driver. For a 2.4 driver please see the original
12 driver (which this driver started from) at
13 http://www.garloff.de/kurt/linux/dc395/
15 Problems, questions and patches should be submitted to the mailing
16 list. Details on the list, including archives, are available at
17 http://lists.twibble.org/mailman/listinfo/dc395x/
21 The driver uses the settings from the EEPROM set in the SCSI BIOS
22 setup. If there is no EEPROM, the driver uses default values.
23 Both can be overriden by command line parameters (module or kernel
26 The following parameters are available:
29 Default: 0, Acceptable values: 0 or 1
31 If safe is set to 1 then the adapter will use conservative
32 ("safe") default settings. This sets:
34 shortcut for dc395x=7,4,9,15,2,10
37 Default: 7, Acceptable values: 0 to 15
39 Sets the host adapter SCSI ID.
42 Default: 1, Acceptable value: 0 to 7
53 Bitmap for device configuration
55 DevMode bit definition:
56 Bit Val(hex) Val(dec) Meaning
57 *0 0x01 1 Parity check
58 *1 0x02 2 Synchronous Negotiation
59 *2 0x04 4 Disconnection
60 *3 0x08 8 Send Start command on startup. (Not used)
61 *4 0x10 16 Tagged Command Queueing
62 *5 0x20 32 Wide Negotiation
65 Bitmap for adapter configuration
67 AdaptMode bit definition
68 Bit Val(hex) Val(dec) Meaning
69 *0 0x01 1 Support more than two drives. (Not used)
70 *1 0x02 2 Use DOS compatible mapping for HDs greater than 1GB.
71 *2 0x04 4 Reset SCSI Bus on startup.
72 *3 0x08 8 Active Negation: Improves SCSI Bus noise immunity.
73 4 0x10 16 Immediate return on BIOS seek command. (Not used)
74 (*)5 0x20 32 Check for LUNs >= 1.
77 Default: 3, Acceptable values: 0-5
79 The number of tags is 1<<x, if x has been specified
82 Default: 1, Acceptable values: 0-180
84 The seconds to not accept commands after a SCSI Reset
87 For the built in driver the parameters should be prefixed with
88 dc395x. (eg "dc395x.safe=1")
93 The driver is free software. It is protected by the GNU General Public
94 License (GPL). Please read it, before using this driver. It should be
95 included in your kernel sources and with your distribution. It carries the
96 filename COPYING. If you don't have it, please ask me to send you one by
98 Note: The GNU GPL says also something about warranty and liability.
99 Please be aware the following: While we do my best to provide a working and
100 reliable driver, there is a chance, that it will kill your valuable data.
101 We refuse to take any responsibility for that. The driver is provided as-is
102 and YOU USE IT AT YOUR OWN RESPONSIBILITY.