1 * STMicroelectronics 10/100/1000 Ethernet driver (GMAC)
4 - compatible: Should be "st,spear600-gmac"
5 - reg: Address and length of the register set for the device
6 - interrupt-parent: Should be the phandle for the interrupt controller
7 that services interrupts for this device
8 - interrupts: Should contain the STMMAC interrupts
9 - interrupt-names: Should contain the interrupt names "macirq"
10 "eth_wake_irq" if this interrupt is supported in the "interrupts"
12 - phy-mode: String, operation mode of the PHY interface.
13 Supported values are: "mii", "rmii", "gmii", "rgmii".
16 - mac-address: 6 bytes, mac address
20 gmac0: ethernet@e0800000 {
21 compatible = "st,spear600-gmac";
22 reg = <0xe0800000 0x8000>;
23 interrupt-parent = <&vic1>;
25 interrupt-names = "macirq", "eth_wake_irq";
26 mac-address = [000000000000]; /* Filled in by U-Boot */