1 Atmel AT91 device tree bindings.
2 ================================
4 Boards with a SoC of the Atmel AT91 or SMART family shall have the following
7 Required root node properties:
8 compatible: must be one of:
11 * "atmel,at91sam9" for SoCs using an ARM926EJ-S core, shall be extended with
12 the specific SoC family or compatible:
16 o "atmel,at91sam9x5" for the 5 series, shall be extended with the specific
28 * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
30 o "atmel,sama5d2" shall be extended with the specific SoC compatible:
32 o "atmel,sama5d3" shall be extended with the specific SoC compatible:
38 o "atmel,sama5d4" shall be extended with the specific SoC compatible:
44 PIT Timer required properties:
45 - compatible: Should be "atmel,at91sam9260-pit"
46 - reg: Should contain registers location and length
47 - interrupts: Should contain interrupt for the PIT which is the IRQ line
48 shared across all System Controller members.
50 System Timer (ST) required properties:
51 - compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
52 - reg: Should contain registers location and length
53 - interrupts: Should contain interrupt for the ST which is the IRQ line
54 shared across all System Controller members.
56 - watchdog: compatible should be "atmel,at91rm9200-wdt"
58 TC/TCLIB Timer required properties:
59 - compatible: Should be "atmel,<chip>-tcb".
60 <chip> can be "at91rm9200" or "at91sam9x5"
61 - reg: Should contain registers location and length
62 - interrupts: Should contain all interrupts for the TC block
63 Note that you can specify several interrupt cells if the TC
64 block has one interrupt per channel.
65 - clock-names: tuple listing input clock names.
66 Required elements: "t0_clk"
67 Optional elements: "t1_clk", "t2_clk"
68 - clocks: phandles to input clocks.
72 One interrupt per TC block:
73 tcb0: timer@fff7c000 {
74 compatible = "atmel,at91rm9200-tcb";
75 reg = <0xfff7c000 0x100>;
78 clock-names = "t0_clk";
81 One interrupt per TC channel in a TC block:
82 tcb1: timer@fffdc000 {
83 compatible = "atmel,at91rm9200-tcb";
84 reg = <0xfffdc000 0x100>;
85 interrupts = <26 4 27 4 28 4>;
87 clock-names = "t0_clk";
90 RSTC Reset Controller required properties:
91 - compatible: Should be "atmel,<chip>-rstc".
92 <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
93 - reg: Should contain registers location and length
98 compatible = "atmel,at91sam9260-rstc";
99 reg = <0xfffffd00 0x10>;
102 RAMC SDRAM/DDR Controller required properties:
103 - compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
104 "atmel,at91sam9260-sdramc",
105 "atmel,at91sam9g45-ddramc",
106 "atmel,sama5d3-ddramc",
107 - reg: Should contain registers location and length
111 ramc0: ramc@ffffe800 {
112 compatible = "atmel,at91sam9g45-ddramc";
113 reg = <0xffffe800 0x200>;
116 SHDWC Shutdown Controller
119 - compatible: Should be "atmel,<chip>-shdwc".
120 <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
121 - reg: Should contain registers location and length
124 - atmel,wakeup-mode: String, operation mode of the wakeup mode.
125 Supported values are: "none", "high", "low", "any".
126 - atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
128 optional at91sam9260 properties:
129 - atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
131 optional at91sam9rl properties:
132 - atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
133 - atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
135 optional at91sam9x5 properties:
136 - atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
141 compatible = "atmel,at91sam9260-rstc";
142 reg = <0xfffffd00 0x10>;
145 Special Function Registers (SFR)
147 Special Function Registers (SFR) manage specific aspects of the integrated
148 memory, bridge implementations, processor and other functionality not controlled
152 - compatible: Should be "atmel,<chip>-sfr", "syscon".
153 <chip> can be "sama5d3" or "sama5d4".
154 - reg: Should contain registers location and length
157 compatible = "atmel,sama5d3-sfr", "syscon";
158 reg = <0xf0038000 0x60>;