1 /*****************************************/
3 /*****************************************/
5 Kernel connector - new netlink based userspace <-> kernel space easy
6 to use communication module.
8 The Connector driver makes it easy to connect various agents using a
9 netlink based network. One must register a callback and an identifier.
10 When the driver receives a special netlink message with the appropriate
11 identifier, the appropriate callback will be called.
13 From the userspace point of view it's quite straightforward:
20 But if kernelspace wants to use the full power of such connections, the
21 driver writer must create special sockets, must know about struct sk_buff
22 handling, etc... The Connector driver allows any kernelspace agents to use
23 netlink based networking for inter-process communication in a significantly
26 int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
27 void cn_netlink_send(struct cn_msg *msg, u32 __group, int gfp_mask);
35 idx and val are unique identifiers which must be registered in the
36 connector.h header for in-kernel usage. void (*callback) (void *) is a
37 callback function which will be called when a message with above idx.val
38 is received by the connector core. The argument for that function must
39 be dereferenced to struct cn_msg *.
48 __u32 len; /* Length of the following data */
52 /*****************************************/
54 /*****************************************/
56 int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
58 Registers new callback with connector core.
60 struct cb_id *id - unique connector's user identifier.
61 It must be registered in connector.h for legal in-kernel users.
62 char *name - connector's callback symbolic name.
63 void (*callback) (struct cn..) - connector's callback.
64 cn_msg and the sender's credentials
67 void cn_del_callback(struct cb_id *id);
69 Unregisters new callback with connector core.
71 struct cb_id *id - unique connector's user identifier.
74 int cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask);
76 Sends message to the specified groups. It can be safely called from
77 softirq context, but may silently fail under strong memory pressure.
78 If there are no listeners for given group -ESRCH can be returned.
80 struct cn_msg * - message header(with attached data).
81 u32 __group - destination group.
82 If __group is zero, then appropriate group will
83 be searched through all registered connector users,
84 and message will be delivered to the group which was
85 created for user with the same ID as in msg.
86 If __group is not zero, then message will be delivered
87 to the specified group.
88 int gfp_mask - GFP mask.
90 Note: When registering new callback user, connector core assigns
91 netlink group to the user which is equal to its id.idx.
93 /*****************************************/
95 /*****************************************/
97 The current framework offers a transport layer with fixed headers. The
98 recommended protocol which uses such a header is as following:
100 msg->seq and msg->ack are used to determine message genealogy. When
101 someone sends a message, they use a locally unique sequence and random
102 acknowledge number. The sequence number may be copied into
103 nlmsghdr->nlmsg_seq too.
105 The sequence number is incremented with each message sent.
107 If you expect a reply to the message, then the sequence number in the
108 received message MUST be the same as in the original message, and the
109 acknowledge number MUST be the same + 1.
111 If we receive a message and its sequence number is not equal to one we
112 are expecting, then it is a new message. If we receive a message and
113 its sequence number is the same as one we are expecting, but its
114 acknowledge is not equal to the acknowledge number in the original
115 message + 1, then it is a new message.
117 Obviously, the protocol header contains the above id.
119 The connector allows event notification in the following form: kernel
120 driver or userspace process can ask connector to notify it when
121 selected ids will be turned on or off (registered or unregistered its
122 callback). It is done by sending a special command to the connector
123 driver (it also registers itself with id={-1, -1}).
125 As example of this usage can be found in the cn_test.c module which
126 uses the connector to request notification and to send messages.
128 /*****************************************/
130 /*****************************************/
132 Netlink itself is not a reliable protocol. That means that messages can
133 be lost due to memory pressure or process' receiving queue overflowed,
134 so caller is warned that it must be prepared. That is why the struct
135 cn_msg [main connector's message header] contains u32 seq and u32 ack
138 /*****************************************/
140 /*****************************************/
142 2.6.14 has a new netlink socket implementation, which by default does not
143 allow people to send data to netlink groups other than 1.
144 So, if you wish to use a netlink socket (for example using connector)
145 with a different group number, the userspace application must subscribe to
146 that group first. It can be achieved by the following pseudocode:
148 s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
150 l_local.nl_family = AF_NETLINK;
151 l_local.nl_groups = 12345;
154 if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
161 int on = l_local.nl_groups;
162 setsockopt(s, 270, 1, &on, sizeof(on));
165 Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket
166 option. To drop a multicast subscription, one should call the above socket
167 option with the NETLINK_DROP_MEMBERSHIP parameter which is defined as 0.
169 2.6.14 netlink code only allows to select a group which is less or equal to
170 the maximum group number, which is used at netlink_kernel_create() time.
171 In case of connector it is CN_NETLINK_USERS + 0xf, so if you want to use
172 group number 12345, you must increment CN_NETLINK_USERS to that number.
173 Additional 0xf numbers are allocated to be used by non-in-kernel users.
175 Due to this limitation, group 0xffffffff does not work now, so one can
176 not use add/remove connector's group notifications, but as far as I know,
177 only cn_test.c test module used it.
179 Some work in netlink area is still being done, so things can be changed in
180 2.6.15 timeframe, if it will happen, documentation will be updated for that