1 commit f33e9653c9c09868995d788511d573771c209fe5
2 Author: Anatolij Gustschin <agust@denx.de>
3 Date: Fri Feb 15 00:13:20 2008 +0100
5 Fix compile warning on lib_ppc/board.c
7 Signed-off-by: Anatolij Gustschin <agust@denx.de>
9 commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
10 Author: Anatolij Gustschin <agust@denx.de>
11 Date: Thu Feb 14 18:22:04 2008 +0100
13 Add Radeon Mobility 9200 pci device id to the radeon driver
15 This patch extends PCI device id table of the
16 radeon driver so that the driver will also support
17 Radeon Mobility 9200 (M9+) based boards.
19 Signed-off-by: Anatolij Gustschin <agust@denx.de>
21 commit 1b8607e1f7143548c6062c28371449ec69588c00
22 Author: Anatolij Gustschin <agust@denx.de>
23 Date: Thu Feb 14 18:19:50 2008 +0100
25 Extend ATI Radeon driver to support more video modes
27 Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
28 800x600, 640x480 at 24, 16 and 8 bpp.
30 Signed-off-by: Anatolij Gustschin <agust@denx.de>
32 commit 4124382de029d361162a4b8cecc773eb8f26e2a8
33 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
34 Date: Sun Feb 10 17:05:20 2008 +0100
36 xsengine: fix typo and few coding style
38 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40 commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
41 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
42 Date: Fri Feb 8 21:25:58 2008 +0100
44 Fix wrong memory limit calculation in memory-test
46 If the length of the memory address range passed to the "mtest" command is
47 not of the form 2^x - 1, not all address lines are tested. This bug is
48 inherited from the original software at
49 http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
52 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
54 commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
55 Author: Wolfgang Denk <wd@denx.de>
56 Date: Fri Feb 15 00:11:39 2008 +0100
60 Signed-off-by: Wolfgang Denk <wd@denx.de>
62 commit f6921e3dc331293c873ec4d109fd5517a42a90b3
63 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
64 Date: Tue Feb 5 13:30:43 2008 +0900
66 sh: Fix register address of SH7722
68 The address of SH7722 is wrong by old document.
69 This patch fixes this problem.
71 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
73 commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
74 Author: Mike Frysinger <vapier@gentoo.org>
75 Date: Mon Feb 4 17:44:23 2008 -0500
77 only update version header as needed
79 Constantly rebuilding the version header will force useless relinking, so we
80 simply need to compare the new header with the existing one before updating
83 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
85 commit 208447f8e953f347425eb92c8e28d59e6d911363
86 Author: Mike Frysinger <vapier@gentoo.org>
87 Date: Mon Jan 28 05:56:19 2008 -0500
89 Do not specify a CROSS_COMPILE default when executing size
91 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
93 commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
94 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
95 Date: Wed Feb 13 11:19:19 2008 +0100
97 Fix return value of mtest when CFG_ALT_MEMTEST set
99 Fix a missing return statement from a non-void function.
101 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
103 commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
104 Author: Timur Tabi <timur@freescale.com>
105 Date: Wed Jan 9 14:35:26 2008 -0600
107 85xx, 86xx: Determine I2C clock frequencies and store in global_data
109 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
111 Update the get_clocks() function in 85xx and 86xx to determine the I2C
112 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
114 Signed-off-by: Timur Tabi <timur@freescale.com>
116 commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
117 Author: Wolfgang Denk <wd@denx.de>
118 Date: Thu Feb 14 23:18:01 2008 +0100
120 TQM834x: clean up configuration
122 Get board name consistent with Linux and elsewhere;
123 get rid of local network definitions etc.
125 Signed-off-by: Wolfgang Denk <wd@denx.de>
127 commit 38cc09c55b1d7f233789052c6fc462e5377669a9
128 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
129 Date: Thu Feb 14 08:02:12 2008 +0100
131 TFTP: fix search of ':' in BootFile
133 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
135 commit 0bc9efada170096c6b273f19165e32936d330d80
136 Author: Wolfgang Denk <wd@denx.de>
137 Date: Thu Feb 14 22:46:55 2008 +0100
139 Coding style cleanup; update CHANGELOG.
141 Signed-off-by: Wolfgang Denk <wd@denx.de>
143 commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
144 Author: Wolfgang Denk <wd@denx.de>
145 Date: Thu Feb 14 22:43:22 2008 +0100
147 PPC: Use r2 instead of r29 as global data pointer
149 R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
150 will refuse to use load/store multiple insns; instead, it issues a
151 list of simple load/store instructions upon function entry and exit,
152 resulting in bigger code size, which in turn makes the build for a
157 Signed-off-by: Wolfgang Denk <wd@denx.de>
159 commit 3c234efa693bc59906c2be55c7918ecbb55392ea
160 Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
161 Date: Wed Jan 30 09:08:49 2008 +0100
163 ARM: make the machid configurable via the environment
165 If the variable "machid" exists, let do_bootm_linux use that instead
166 of bd->bi_arch_number.
168 Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
170 commit dd24058407c5add45cc60aec6c757ddc1a17e1b0
171 Author: Vlad Lungu <vlad@comsys.ro>
172 Date: Wed Jan 23 16:34:46 2008 +0200
174 Use #ifdef CONFIG_FSLDMAFEC
176 MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
179 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
181 commit 26c7bab81e08dc7bd696c48f753428a829629bd8
182 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
183 Date: Sat Jan 19 10:25:59 2008 +0900
185 common/miiphyutil.c: Cleanup MII_DEBUG and debug()
187 Current MII_DEBUG is confusing in two ways. One is useless define-then-
188 undef at the top of the file. The other is there is only one debug() in
189 this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
190 While there are many useful printf()/puts() debug codes, but they are for
191 DEBUG, not for MII_DEBUG.
193 This patch tries to put them all together into MII_DEBUG and debug().
195 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
197 commit 751b9b5189f3274b03c809172631316d6b002c82
198 Author: Kyungmin Park <kmpark@infradead.org>
199 Date: Thu Jan 17 16:43:25 2008 +0900
201 OneNAND Initial Program Loader (IPL) support
203 This patch enables the OneNAND boot within U-Boot.
204 Before this work, we used another OneNAND IPL called X-Loader based
205 on open source. With this work, we can build the oneboot.bin image
206 without other program.
208 The build sequence is simple.
209 First, it compiles the u-boot.bin
210 Second, it compiles OneNAND IPL
211 Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
212 The mechanism is similar with NAND boot except it boots from itself.
214 Another thing is that you can only use the OneNAND IPL only to work
215 other bootloader such as RedBoot and so on.
217 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
219 commit 21f6f9636f0e978397548751347425fbf8d42bb3
220 Author: Andy Fleming <afleming@freescale.com>
221 Date: Wed Jan 16 13:06:59 2008 -0600
223 Fix CONFIG_MMC usage in fat code
225 A #if statement in fat.c depended on CONFIG_MMC, instead of
226 defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
227 as "1" rather than just defined. Now it's better.
229 Signed-off-by: Andy Fleming <afleming@freescale.com>
231 commit f57d7d364ce189e39b0a64338d2f8012c074a2bd
232 Author: Rafal Jaworowski <raj@semihalf.com>
233 Date: Tue Jan 15 12:52:31 2008 +0100
235 ppc: Refactor cache routines, so there is only one common set.
237 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
239 commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba
240 Author: Jon Loeliger <jdl@jdl.com>
241 Date: Wed Jan 23 15:55:02 2008 -0600
243 86xx: Fix compilation warning in sys_eprom.c
245 sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
247 Signed-off-by: Jon Loeliger <jdl@freescale.com>
249 commit b7f6193e76651e1fd606e46eb11915b53cb6618b
250 Author: Niklaus Giger <niklaus.giger@netstal.com>
251 Date: Tue Feb 5 10:26:42 2008 +0100
253 ppc4xx: HCU4/5. Fix make O=../xx
255 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
257 commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3
258 Author: Larry Johnson <lrj@acm.org>
259 Date: Tue Jan 22 08:51:59 2008 -0500
261 ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
263 Signed-off-by: Larry Johnson <lrj@acm.org>
265 commit fe891ecf4d187e9d11dde869ed4623af52b54451
266 Author: Hiroshi Ito <ito@mlb.co.jp>
267 Date: Thu Jan 31 18:35:04 2008 +0900
269 NFS Timeout with large files.
271 Retry to send NFS packet before reaching timeout.
273 Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
275 commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0
276 Author: Johannes Stezenbach <js@sig21.net>
277 Date: Tue Jan 29 00:11:25 2008 +0100
279 Add dependencies to avoid race conditions with parallel make.
281 Signed-off-by: Johannes Stezenbach <js@sig21.net>
283 commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6
284 Author: Mike Frysinger <vapier@gentoo.org>
285 Date: Mon Jan 28 05:46:01 2008 -0500
287 Mark board_init_[fr] as noreturn
289 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
291 commit 161b2af4d7b48fd602ce333c355a4df0337892bb
292 Author: Mike Frysinger <vapier@gentoo.org>
293 Date: Mon Jan 28 05:28:50 2008 -0500
295 Only use TEXT_BASE if defined by the board
297 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
299 commit 1b769881750030f10743808b9d6013e11f559350
300 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
301 Date: Fri Jan 25 07:54:47 2008 +0100
303 Fix remaining CONFIG_COMMANDS
308 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
310 commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9
311 Author: Niklaus Giger <niklaus.giger@netstal.com>
312 Date: Mon Jan 21 16:46:00 2008 +0100
316 One should never add a backup file ending in with ~ to the git repository.
318 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
320 commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0
321 Author: Kumar Gala <galak@kernel.crashing.org>
322 Date: Thu Jan 17 00:02:10 2008 -0600
324 Remove duplicate defines for ARRAY_SIZE
326 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
328 commit c77ce474b1c57b13e9d36d9830f147966c143694
329 Author: Stelian Pop <stelian@popies.net>
330 Date: Mon Jan 14 22:08:14 2008 +0100
332 Fix incorrect address test in AT91F_DataflashSelect().
334 Signed-off-by: Stelian Pop <stelian@popies.net>
336 commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d
337 Author: Kumar Gala <galak@kernel.crashing.org>
338 Date: Wed Feb 13 15:09:58 2008 -0600
340 Fix building of fdt_support.c if DEBUG set
342 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
344 commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03
345 Author: Jon Loeliger <jdl@freescale.com>
346 Date: Tue Feb 12 14:53:28 2008 -0600
348 Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
350 These replace direct structure references for IMMR sections.
352 Signed-off-by: Jon Loeliger <jdl@freescale.com>
354 commit c62776be8dca4097ca03d4f9415f08d4887b45d0
355 Author: Wolfgang Denk <wd@denx.de>
356 Date: Tue Feb 12 00:45:06 2008 +0100
358 Get rid of "#undef DEBUG" from board config files.
360 Signed-off-by: Wolfgang Denk <wd@denx.de>
362 commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8
363 Author: Timur Tabi <timur@freescale.com>
364 Date: Tue Jan 15 17:09:41 2008 -0600
366 Remove #undef DEBUG from MPC83xx board header files
368 Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
369 The inclusion of this line makes it impossible to enable debug code in
370 other source files, because "#define DEBUG" typically needs to be defined
371 before any header files are included.
373 Signed-off-by: Timur Tabi <timur@freescale.com>
375 commit 69018ce2e086e9caf35b914d675b82bc4888f077
376 Author: Kumar Gala <galak@kernel.crashing.org>
377 Date: Thu Jan 17 08:25:45 2008 -0600
379 QE: Move FDT support into a common file
381 Move the flat device tree setup for QE related devices into
382 a common file shared between 83xx & 85xx platforms that have QE's.
384 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
386 commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
387 Author: Grzegorz Bernacki <gjb@semihalf.com>
388 Date: Mon Jan 28 10:15:02 2008 +0100
390 ADS5121e: DDR2 init/timing update.
392 Signed-off-by: John Rigby <jrigby@freescale.com>
393 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
395 commit ac9152830d7fdebace8a260b7737ef2870c21ca0
396 Author: John Rigby <jrigby@freescale.com>
397 Date: Wed Jan 30 13:36:57 2008 -0700
401 Changes to match 5121 device tree going mainline in 2.6.25.
403 Change OF_SOC from "soc5121" to plain "soc".
404 Remove unneeded "ref-frequency" fixups.
405 Remove "address" enetaddr fixup.
407 Add bus-frequency fixup for old OF_SOC so old
408 kernels with old device trees will work with new
409 u-boot with 66MHz IPS clock
411 Signed-off-by: John Rigby <jrigby@freescale.com>
413 commit de55d18df3ff2ea614624e74793de7c43520e0e7
414 Author: John Rigby <jrigby@freescale.com>
415 Date: Wed Jan 30 13:36:56 2008 -0700
417 Change IPS freq to 66MHz
419 Recommended frequency is 66MHz
420 Change divider from 4 to 3.
422 Signed-off-by: John Rigby <jrigby@freescale.com>
424 commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974
425 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
426 Date: Mon Jan 14 22:38:55 2008 +0100
428 xsengine: rename board_post_init to board_late_init
430 missing migration from "Cleanup of some init functions"
431 in c837dcb1a316745092567bfe4fb266d0941884ff
433 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
435 commit 8dafa87476b0d7170e219c2f5e3842c833a91807
436 Author: Larry Johnson <lrj@acm.org>
437 Date: Sat Jan 12 23:35:33 2008 -0500
439 Add attribute POST_PREREL to ECC memory POST
441 Signed-off-by: Larry Johnson <lrj@acm.org>
443 commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938
444 Author: Kumar Gala <galak@kernel.crashing.org>
445 Date: Thu Jan 17 08:25:45 2008 -0600
447 QE: Move FDT support into a common file
449 Move the flat device tree setup for QE related devices into
450 a common file shared between 83xx & 85xx platforms that have QE's.
452 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
454 commit d38da537943cd36356b9d3d9d9b60533554b81d8
455 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
456 Date: Wed Jan 23 17:20:14 2008 +0100
458 AVR32: Make SDRAM refresh rate configurable
460 The existing code assumes the SDRAM row refresh period should always
461 be 15.6 us. This is not always true, and indeed on the ATNGW100, the
462 refresh rate should really be 7.81 us.
464 Add a refresh_period member to struct sdram_info and initialize it
465 properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
466 panic() until the refresh_period member is updated properly.
468 Big thanks to Gerhard Berghofer for pointing out this issue.
470 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
472 commit 61151cccb660cdb06a07fb283de6089913d7bde0
473 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
474 Date: Thu Apr 19 10:10:11 2007 +0200
476 ATSTK1000: Fix potential flash programming bug
478 The (now obsolete) atngw100 flash programming code was having problems
479 programming the onboard at49bv642 chip. The atstk1000 flash
480 programming code may have the same bug, so import fix for this problem
481 from the AVR32 Linux BSP.
483 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
485 commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11
486 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
487 Date: Thu Nov 22 17:04:13 2007 +0100
489 ATSTK1004: Fix comment about default load address
491 The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
492 wouldn't have worked anyway since the board can only access 4MB of
495 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
497 commit 8269ab53608d8db2aa06969c337ab0b0518211e5
498 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
499 Date: Thu Nov 22 17:01:24 2007 +0100
501 ATSTK1002: Use SDRAM + 4MB as default load address
503 Many people run into problems when they compile a big kernel and load
504 the uImage at the default SDRAM + 2MB address as the kernel will
505 overwrite the uImage as it is being unpacked. Increase the default
506 load address so that we can load a 4MB kernel image without any
509 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
511 commit 2bcacc2d841b77f3d2d3910db722003742727e9f
512 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
513 Date: Thu Nov 22 16:51:39 2007 +0100
515 ATNGW100: Fix default mtest range
517 Let mtest cover the whole SDRAM except the last megabyte, which is
520 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
522 commit 9856a6b3104e0bc210b0868dfe691c52bf03c227
523 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
524 Date: Tue Jan 22 15:31:56 2008 +0900
526 sh: Fix register address of SH7722.
528 The address of SH7722 is wrong by old document.
529 This patch fixes this problem.
531 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
533 commit 30942b18b66f35f2ceedab39af10e9eccaa943cc
534 Author: Mike Frysinger <vapier@gentoo.org>
535 Date: Mon Feb 4 19:26:57 2008 -0500
537 new command for displaying strings at specified memory locations
539 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
541 commit b58d8b48e25b0c866d167cc577f118f528cd9e0a
542 Author: Mike Frysinger <vapier@gentoo.org>
543 Date: Mon Feb 4 19:26:57 2008 -0500
545 rewrite/cleanup Blackfin RTC driver
547 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
549 commit 94a91e248b71c3ff951fc27cff6909e82ca37d15
550 Author: Mike Frysinger <vapier@gentoo.org>
551 Date: Mon Feb 4 19:26:57 2008 -0500
553 generate u-boot.ldr for Blackfin targets
555 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
557 commit b779f7a59530436040f157f7841db7ab796542df
558 Author: Mike Frysinger <vapier@gentoo.org>
559 Date: Mon Feb 4 19:26:57 2008 -0500
563 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
565 commit cc2977acc3bbbb7850f16645dd1081f95335868d
566 Author: Mike Frysinger <vapier@gentoo.org>
567 Date: Mon Feb 4 19:26:57 2008 -0500
569 move Blackfin cpu object list to respective cpu directories
571 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
573 commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505
574 Author: Mike Frysinger <vapier@gentoo.org>
575 Date: Mon Feb 4 19:26:57 2008 -0500
577 interface to Blackfin on-chip One-Time-Programmable memory
579 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
581 commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788
582 Author: Mike Frysinger <vapier@gentoo.org>
583 Date: Mon Feb 4 19:26:56 2008 -0500
585 add support for memory commands with Blackfin L1 instruction memory
587 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
589 commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464
590 Author: Mike Frysinger <vapier@gentoo.org>
591 Date: Mon Feb 4 19:26:56 2008 -0500
593 use C code rather than inline assembly
595 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
597 commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9
598 Author: Mike Frysinger <vapier@gentoo.org>
599 Date: Mon Feb 4 19:26:56 2008 -0500
601 add Blackfin-specific reginfo command
603 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
605 commit 0858b835e7ea501ea084d34cef75932f098342bb
606 Author: Mike Frysinger <vapier@gentoo.org>
607 Date: Mon Feb 4 19:26:55 2008 -0500
609 add support for Blackfin symbol prefixes to examples
611 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
613 commit 8dc48d71a4be753ea9f84956cd33600de35fad04
614 Author: Mike Frysinger <vapier@gentoo.org>
615 Date: Mon Feb 4 19:26:55 2008 -0500
617 add Blackfin-specific bdinfo command
619 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
621 commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a
622 Author: Mike Frysinger <vapier@gentoo.org>
623 Date: Mon Feb 4 19:26:55 2008 -0500
625 move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
627 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
629 commit 60fa72d65610c7ef33e1d6db858979d05ff0df58
630 Author: Mike Frysinger <vapier@gentoo.org>
631 Date: Mon Feb 4 19:26:55 2008 -0500
633 unify the Blackfin board targets
635 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
637 commit d4d7730853e5d675f76ec666807da3028c91d592
638 Author: Mike Frysinger <vapier@gentoo.org>
639 Date: Mon Feb 4 19:26:55 2008 -0500
641 punt Blackfin VDSP headers and import sanitized/auto-generated ones
643 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
645 commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd
646 Author: Mike Frysinger <vapier@gentoo.org>
647 Date: Mon Feb 4 19:26:54 2008 -0500
649 always pull in asm/blackfin.h for Blackfin ports
651 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
653 commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc
654 Author: Mike Frysinger <vapier@gentoo.org>
655 Date: Mon Feb 4 19:26:54 2008 -0500
657 add missing __raw versions of Blackfin read/write io functions
659 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
661 commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d
662 Author: Mike Frysinger <vapier@gentoo.org>
663 Date: Mon Feb 4 19:26:54 2008 -0500
665 add the default Blackfin logo used by Blackfin boards with splash screens
667 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
669 commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1
670 Author: Mike Frysinger <vapier@gentoo.org>
671 Date: Mon Feb 4 19:26:54 2008 -0500
673 add some more Blackfin docs
675 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
677 commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf
678 Author: Mike Frysinger <vapier@gentoo.org>
679 Date: Mon Feb 4 19:26:54 2008 -0500
681 make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
683 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
685 commit 4087bc88cebec75c432a7fe9f6afb545b0919831
686 Author: Mike Frysinger <vapier@gentoo.org>
687 Date: Mon Feb 4 19:26:54 2008 -0500
689 fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
691 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
693 commit b45264ee85cbd92020640a32e02fb434fd557108
694 Author: Mike Frysinger <vapier@gentoo.org>
695 Date: Mon Feb 4 19:26:53 2008 -0500
697 add gitignores for Blackfin pieces
699 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
701 commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29
702 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
703 Date: Fri Jan 18 01:14:03 2008 +0100
705 TFTP: add host ip addr support
707 allow to use a different server as set in serverip
708 add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
709 if not defined the max length will be at 128
711 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
713 commit e56b4b494cd92def577969f9678395aa22d34c9f
714 Author: Timur Tabi <timur@freescale.com>
715 Date: Wed Jan 9 14:35:26 2008 -0600
717 85xx,86xx: Determine I2C clock frequencies and store in global_data
719 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
721 Update the get_clocks() function in 85xx and 86xx to determine the I2C
722 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
724 Signed-off-by: Timur Tabi <timur@freescale.com>
726 commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2
727 Author: Wolfgang Denk <wd@denx.de>
728 Date: Thu Dec 27 10:56:54 2007 +0100
730 OMAP5912: fix FIFO handling in UART driver
732 According to the OMAP5912 Serial Interfaces Reference Guide (see
733 http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
734 FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
735 changed when the baud clock is not running, i. e. when both DLL and
738 Thus make sure that DLL and DLH are 0 when writing the FCR.
740 Signed-off-by: Wolfgang Denk <wd@denx.de>
742 commit 16158778b5f52f201e95ded2d2d9084b0ed5670d
743 Author: Harald Welte <laforge@openmoko.org>
744 Date: Wed Dec 19 15:10:52 2007 +0100
746 ARM: S3C24x0 SoC NAND controller support
748 This patch adds NAND support to the S3C24x0 SoC code in u-boot
750 Signed-off-by: Harald Welte <laforge@openmoko.org>
752 commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163
753 Author: Harald Welte <laforge@openmoko.org>
754 Date: Wed Dec 19 14:24:40 2007 +0100
756 ARM: s3c24xx: Multiple serial port support
758 This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
760 Signed-off-by: Harald Welte <laforge@openmoko.org>
762 commit a25f72f1f73a11de68251fb88c89991e202e68fa
763 Author: Harald Welte <laforge@openmoko.org>
764 Date: Wed Dec 19 14:16:57 2007 +0100
766 ARM: arm920t: Allow use of 'gd' pointer from IRQ
768 This patch allows us to use the 'gd' pointer (and thus environment
769 and everything else associated with it) from interrupt context on
772 Signed-off-by: Harald Welte <laforge@openmoko.org>
774 commit be19bd5cd0f454b63298844a0b5377e029b2caad
775 Author: Harald Welte <laforge@openmoko.org>
776 Date: Wed Dec 19 14:19:38 2007 +0100
778 ARM: arm920/s3c24xx: IRQ demulitplexer callback
780 This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
781 plus a stub implementation of it for the S3C2410.
783 The purpose is to allow arm920t implementations such as the s3c24x0 to
784 implement interrupt handlers in u-boot without having to touch core
787 Signed-off-by: Harald Welte <laforge@openmoko.org>
789 commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda
790 Author: Hebbar <gururajakr@sanyo.co.in>
791 Date: Tue Dec 18 16:03:07 2007 -0800
793 ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
795 Add ifdef to bdinfo command to display ethernet information
796 only if CONFIG_CMD_NET is defined for arm modules.
798 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
800 commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884
801 Author: Hebbar <gururajakr@sanyo.co.in>
802 Date: Tue Dec 18 16:00:54 2007 -0800
804 ARM: add I2C init function call in lib_arm/board.c
806 Adds I2C init func call to init sequence for ARM boards. This is
807 present in ppc,blackfin and other processor init sequence.
809 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
811 commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae
812 Author: Stefan Roese <sr@denx.de>
813 Date: Fri Feb 1 09:38:29 2008 +0100
815 ppc4xx: Fix ndfc HW ECC byte order
817 The current ndfc HW ECC implementation swaps the first two ECC bytes.
818 But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
819 so this swapping in the HW ECC driver is bogus. This patch fixes this
820 problem and now really uses the SMC ECC byte order.
822 Thanks to Sean MacLennan for pointing this out.
824 Signed-off-by: Stefan Roese <sr@denx.de>
826 commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1
827 Author: Stefan Roese <sr@denx.de>
828 Date: Wed Jan 30 15:35:50 2008 +0100
830 ppc4xx: Fix GPIO configuration for pcs440ep
832 The SRD0_PFC0 register was not configured correctly to enable the GPIO's
833 49-63 for GPIO. They have been configured as trace signals. This patch
834 fixes this by clearing the corresponding bit.
836 Signed-off-by: Stefan Roese <sr@denx.de>
838 commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821
839 Author: Stefan Roese <sr@denx.de>
840 Date: Wed Jan 30 14:48:28 2008 +0100
842 ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
844 Signed-off-by: Stefan Roese <sr@denx.de>
846 commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368
847 Author: Ladislav Michl <ladis@linux-mips.org>
848 Date: Fri Dec 7 00:42:32 2007 +0100
850 ARM: Board voiceblue update
852 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
854 commit 2c5260f711168d5ee91c70ddbb7d897013eefc46
855 Author: Ladislav Michl <ladis@linux-mips.org>
856 Date: Thu Dec 6 23:24:57 2007 +0100
858 ARM: AT91RM9200 based boards config cleanup
860 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
862 Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
865 commit 481f28b1db5cd21deb55f69399ba240e107af4c7
866 Author: Ladislav Michl <ladis@linux-mips.org>
867 Date: Thu Dec 6 22:59:16 2007 +0100
869 ARM: Fix at91rm9200dk base address
871 Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
872 renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
873 with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
874 However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
875 CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
876 I'm sending this patch 4th (!) time in hope it produces at least some
879 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
881 Fix at91rm9200dk base and environment address.
883 commit c95219fae2a7add7daa2f91aedca65b1698465c7
884 Author: stefano babic <sbabic@denx.de>
885 Date: Tue Nov 20 10:40:24 2007 +0100
887 MMC for PXA 27X (resubmit)
889 MMC support for X_Scale PXA is broken and does not work.
890 Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
891 There were already some patches around the world but none of them was
892 merged into the official u-boot tree.
894 This patch makes order fixing this issue. Resubmit after code cleanup.
896 Applied and tested on PXA 270 (TrizepsIV module).
898 Signed-off-by: Stefano Babic <sbabic@denx.de>
900 commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33
901 Author: stefano babic <sbabic@denx.de>
902 Date: Tue Nov 20 10:37:04 2007 +0100
904 Fix gcc issues in pxa-regs.h
906 Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
907 issues generates wrong code.
908 (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
909 This patch fixes the problem and solves the gcc-4 issues as the linux
912 Signed-off-by: Stefano Babic <sbabic@denx.de>
913 Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>
915 commit 7047b388876e7b905b2ec4edb8010543e3641b85
916 Author: Jens Gehrlein <sew_s@tqs.de>
917 Date: Tue Jan 29 08:45:03 2008 +0100
921 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
922 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
924 commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec
925 Author: Jens Gehrlein <sew_s@tqs.de>
926 Date: Tue Jan 29 08:45:02 2008 +0100
928 TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
930 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
931 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
933 commit 8931ab176025b03cfc320b3fd1eca432a88ed560
934 Author: Ben Warren <biggerbadderben@gmail.com>
935 Date: Sat Jan 26 23:41:19 2008 -0500
937 Fix conditional compilation of mpx8xxx_spi driver
939 This driver should only compile if CONFIG_MPC8XXX_SPI is set
941 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
942 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
944 commit 63f732d3d3880feb531f48af247c025bf01462b0
945 Author: Rafal Jaworowski <raj@semihalf.com>
946 Date: Tue Jan 29 17:00:34 2008 +0100
948 API: Provide dummy halt() in the glue layer.
950 This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG.
952 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
954 commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826
955 Author: Rafal Jaworowski <raj@semihalf.com>
956 Date: Tue Jan 29 16:57:38 2008 +0100
958 API: Convert conditional building to the new scheme.
960 This fixes a build breakage with CONFIG_API enabled, which appeared after
961 the recent changes in the U-Boot build system.
963 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
965 commit 98b742489c09780be6a832eeaa4e5eff824792bb
966 Author: Wolfgang Denk <wd@denx.de>
967 Date: Fri Jan 25 09:56:17 2008 +0100
969 inka4x0: remove dead code
971 Signed-off-by: Wolfgang Denk <wd@denx.de>
973 commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa
974 Author: Becky Bruce <becky.bruce@freescale.com>
975 Date: Wed Jan 23 16:31:06 2008 -0600
977 86xx: Add reginfo command
979 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
981 commit ddcebcb638715a6278da93b553d5016f99823816
982 Author: Becky Bruce <becky.bruce@freescale.com>
983 Date: Wed Jan 23 16:31:05 2008 -0600
985 86xx: Add print_laws function to fsl_law.c
987 This can be used for debug, and will be used by board code
988 to help implement reginfo.
990 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
992 commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3
993 Author: Becky Bruce <becky.bruce@freescale.com>
994 Date: Wed Jan 23 16:31:04 2008 -0600
996 86xx: Remove old-style law setup code
998 This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.
1000 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
1002 commit 713d8186649dae874613d495b0cecaa039a98b30
1003 Author: Becky Bruce <becky.bruce@freescale.com>
1004 Date: Wed Jan 23 16:31:03 2008 -0600
1006 86xx: Convert sbc8641d to use new law setup code.
1008 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
1010 commit 031976f6364b93833e989f57e9f1e023e0be8c4c
1011 Author: Becky Bruce <becky.bruce@freescale.com>
1012 Date: Wed Jan 23 16:31:02 2008 -0600
1014 86xx: Convert mpc8610hpcd to new law setup method.
1016 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
1018 commit 4933b91f8a49e436681f163df3173beb91cac44a
1019 Author: Becky Bruce <becky.bruce@freescale.com>
1020 Date: Wed Jan 23 16:31:01 2008 -0600
1022 86xx: Support new law setup method and convert mpc8641
1024 Adds the support code in cpu/mpc86xx for the new law setup code
1025 recently created fsl_law.c, and changes the MPC8641HPCN config
1028 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
1030 commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1
1031 Author: Becky Bruce <becky.bruce@freescale.com>
1032 Date: Wed Jan 23 16:31:00 2008 -0600
1034 86xx: Rearrange the sequence in start.S
1036 * split the BAT initialization so that only 2 BATs (for the boot page
1037 and stack) are programmed very early on. The rest are initialized later.
1038 * Move other BAT setup, ccsrbar setup, and law setup later in the code
1039 after translation has been enabled.
1041 These changes will facilitate the moving of law and BAT initialization
1042 to C code, and will aid with 36-bit physical addressing support.
1044 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
1046 commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0
1047 Author: Wolfgang Denk <wd@denx.de>
1048 Date: Wed Jan 23 14:41:37 2008 +0100
1050 Coding Style Cleanup; update CHANGELOG
1052 Signed-off-by: Wolfgang Denk <wd@denx.de>
1054 commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f
1055 Author: Wolfgang Denk <wd@denx.de>
1056 Date: Wed Jan 23 14:31:17 2008 +0100
1058 Coding Style Cleanup; update CHANGELOG
1060 Signed-off-by: Wolfgang Denk <wd@denx.de>
1062 commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace
1063 Author: Dave Liu <r63238@freescale.com>
1064 Date: Fri Jan 18 10:07:04 2008 +0800
1066 mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
1068 The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
1069 cause the 83xx immap broken, so the DMA and PCI will
1072 The patch fix the struct spi8xxx and rm struct spi83xx.
1074 Signed-off-by: Dave Liu <daveliu@freescale.com>
1075 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1077 commit 6b4439444286e0fcd01596df504e6ca897ad3e5a
1078 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1079 Date: Sat Apr 14 17:11:49 2007 +0200
1081 AVR32: ATNGW100 board support
1083 Add support for the ATNGW100 Network Gateway reference design,
1084 including flash, ethernet and MMC support.
1086 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1088 commit e006927a0b9a54e8ee7685d8ac748aaad6801862
1089 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1090 Date: Sat Nov 24 18:15:31 2007 +0100
1092 AVR32: Initialize ipaddr, loadaddr and bootfile at startup
1094 I don't know why the relevant layers can't do this by itself, but this
1097 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1099 commit 799891ef7b1b3432032ec23466df6b665a797fa4
1100 Author: Michael Schwingen <michael@schwingen.org>
1101 Date: Fri Jan 18 00:04:28 2008 +0100
1103 Add AcTux board support
1107 The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
1109 contain changes for multiple boards, the board-specific files follow as
1112 Signed-off-by: Michael Schwingen <michael@schwingen.org>
1114 commit 66a4344a4d910a11125df7768899ad529719855e
1115 Author: Michael Schwingen <michael@schwingen.org>
1116 Date: Wed Jan 16 19:53:23 2008 +0100
1118 add AcTux-4 board support
1120 Signed-off-by: Michael Schwingen <michael@schwingen.org>
1122 commit bc24345e4101a5c996d6b48ce497b09c53025dc6
1123 Author: Michael Schwingen <michael@schwingen.org>
1124 Date: Wed Jan 16 19:51:55 2008 +0100
1126 add AcTux-3 board support
1128 Signed-off-by: Michael Schwingen <michael@schwingen.org>
1130 commit aebf00fc4d1343b24715373893f7b20bf462d1e9
1131 Author: Michael Schwingen <michael@schwingen.org>
1132 Date: Wed Jan 16 19:51:14 2008 +0100
1134 add AcTux-2 board support
1136 Signed-off-by: Michael Schwingen <michael@schwingen.org>
1138 commit ea99e8f05b7240fd657739e286664664ae160abe
1139 Author: Michael Schwingen <michael@schwingen.org>
1140 Date: Wed Jan 16 19:50:37 2008 +0100
1142 add AcTux-1 board support
1144 Signed-off-by: Michael Schwingen <michael@schwingen.org>
1146 commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64
1147 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1148 Date: Mon Jan 14 19:20:08 2008 +0100
1150 ARM: remove useless function board_post_init
1152 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1154 commit 96bd462942022e4569b582c072a0ed26de1cd19b
1155 Author: Michael Schwingen <michael@schwingen.org>
1156 Date: Thu Jan 10 14:59:46 2008 +0100
1160 enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
1161 No handshaking is done, but the active RTS signal allows to
1162 connect to the target using a PC which is using RTS/CTS
1163 handshake, and does no harm if the PC is set to ignore RTS.
1165 Signed-off-by: Michael Schwingen <michael@schwingen.org>
1167 commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93
1168 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1169 Date: Mon Jan 7 08:41:34 2008 +0100
1171 IXP: add dynamic microcode addr
1173 allow to load the microde from flash or ram by download it through
1174 the serial or other.
1176 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1177 Acked-by: Stefan Roese <sr@denx.de>
1179 commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564
1180 Author: Michael Schwingen <michael@schwingen.org>
1181 Date: Sat Nov 10 15:44:12 2007 +0100
1183 load ixp42x NPE firmware from separate flash block, remove dead code
1187 the following patch adds support to move the IXP42X NPE firmware to a
1188 separate flash block, whose start address is defined in
1189 CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
1190 NPE-enabled u-boot without copyright problems due to the NPE firmware.
1192 I hope the patch applies, I get whitespace-related differences in the NPE
1193 files due to trailing whitespace in the original versions.
1195 Signed-off-by: Michael Schwingen <michael@schwingen.org>
1196 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1198 commit 57a127201eb3d8cc19170a008e0bd7af608bd72f
1199 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1200 Date: Tue Jan 15 14:15:46 2008 -0600
1202 ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
1204 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1205 Signed-off by: John Rigby <jrigby@freescale.com>
1207 commit 1aee111135d8660a164d4f6bf7d66b032ea535cf
1208 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1209 Date: Tue Jan 15 14:02:49 2008 -0600
1211 ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
1213 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1214 Signed-off by: John Rigby <jrigby@freescale.com>
1216 commit 777d1abd9796f1c2e148417cc10657e847d318ce
1217 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1218 Date: Tue Jan 15 14:00:25 2008 -0600
1220 ColdFire: Add MCF547x_8x FEC driver
1222 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1223 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1224 Signed-off by: John Rigby <jrigby@freescale.com>
1226 commit 72f56adc0b25d43875ad067bae6be1bcea86b79f
1227 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1228 Date: Tue Jan 15 13:54:09 2008 -0600
1230 ColdFire: Add MCF547x_8x dma code and header files
1232 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1233 Signed-off by: John Rigby <jrigby@freescale.com>
1235 commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87
1236 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1237 Date: Tue Jan 15 13:52:03 2008 -0600
1239 ColdFire: Add MCF547x_8x dma code - 2
1241 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1242 Signed-off by: John Rigby <jrigby@freescale.com>
1244 commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f
1245 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1246 Date: Tue Jan 15 13:48:52 2008 -0600
1248 ColdFire: Add MCF547x_8x dma code - 1
1250 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1251 Signed-off by: John Rigby <jrigby@freescale.com>
1253 commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3
1254 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1255 Date: Tue Jan 15 13:39:44 2008 -0600
1257 ColdFire: Add MCF547x_8x related header files
1259 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1260 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1261 Signed-off by: John Rigby <jrigby@freescale.com>
1263 commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5
1264 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1265 Date: Tue Jan 15 13:37:34 2008 -0600
1267 ColdFire: Add MCF547x_8x cpu arch
1269 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1270 Signed-off by: John Rigby <jrigby@freescale.com>
1272 commit e2756f4b54aba0e0523b81dd145666829cf7fd59
1273 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1274 Date: Mon Jan 14 17:47:23 2008 -0600
1276 ColdFire: Add MCF5227x cpu and M52277EVB support-3
1278 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1279 Signed-off by: John Rigby <jrigby@freescale.com>
1281 commit c87581027994c148131b2f11aa75501f782ec19a
1282 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1283 Date: Mon Jan 14 17:46:19 2008 -0600
1285 ColdFire: Add MCF5227x cpu and MCF52277EVB support-2
1287 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1288 Signed-off by: John Rigby <jrigby@freescale.com>
1290 commit 1552af70ecab11b9f3dceff7528ed15faf678b9d
1291 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1292 Date: Mon Jan 14 17:43:33 2008 -0600
1294 ColdFire: Add MCF5227x cpu and M52277EVB support-1
1296 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1297 Signed-off by: John Rigby <jrigby@freescale.com>
1299 commit 397b7b81a1f1008798ae1206913508cc89cb3a7d
1300 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1301 Date: Mon Jan 14 17:35:44 2008 -0600
1303 ColdFire: Fix CFI Flash low level Read/Write macro
1305 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1306 Signed-off by: John Rigby <jrigby@freescale.com>
1308 commit aa5f1f9dc815a76f6dffb580798599c028fe7feb
1309 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1310 Date: Mon Jan 14 17:23:08 2008 -0600
1312 ColdFire: Add M5373EVB platform support - 2
1314 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1315 Signed-off by: John Rigby <jrigby@freescale.com>
1317 commit 1ac559d4aa358f63b48c62b564224c06feeb4e36
1318 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1319 Date: Mon Jan 14 17:19:54 2008 -0600
1321 ColdFire: Add M5373EVB platform support - 1
1323 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1324 Signed-off by: John Rigby <jrigby@freescale.com>
1326 commit 320d61991fa3190ee41765601ed017b6b5ff7b2b
1327 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1328 Date: Mon Jan 14 17:17:03 2008 -0600
1330 ColdFire: Update FlexBus CS for MCF532x
1332 Definition update and change from 16bit to 32bit
1334 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1335 Signed-off by: John Rigby <jrigby@freescale.com>
1337 commit 2e72ad0644b940817a89a3590ce0d7b99c05c396
1338 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1339 Date: Mon Jan 14 17:11:47 2008 -0600
1341 ColdFire: PCI and misc updates for MCF5445x
1343 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1344 Signed-off by: John Rigby <jrigby@freescale.com>
1346 commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee
1347 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1348 Date: Mon Jan 14 17:06:55 2008 -0600
1350 ColdFire: MCF5445x header files cleanup
1352 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1353 Signed-off by: John Rigby <jrigby@freescale.com>
1355 commit d9aae6260993a93f7fcf13abff85a601f4f50ea7
1356 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1357 Date: Mon Jan 14 16:59:42 2008 -0600
1359 ColdFire: MCF532x header files cleanup
1361 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1362 Signed-off by: John Rigby <jrigby@freescale.com>
1364 commit 7af7751d047e74b2ec58400f97b879c56446b3e8
1365 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
1366 Date: Mon Jan 14 15:30:15 2008 -0600
1368 ColdFire: Add modules header files
1370 Add CF specific modules header files
1372 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
1373 Signed-off-by: John Rigby <jrigby@freescale.com>
1375 commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5
1376 Author: Kim Phillips <kim.phillips@freescale.com>
1377 Date: Thu Jan 17 12:48:00 2008 -0600
1379 codingstyle cleanup for spi driver
1381 ..and rm unused CONFIG_FSL_SPI define
1383 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1385 commit d59feffb42c9f174116db7a82a311df98983dfce
1386 Author: Haiying Wang <Haiying.Wang@freescale.com>
1387 Date: Wed Jan 16 17:12:12 2008 -0500
1389 FSL: Fix common EEPROM_data structure definition
1391 - Fix EEPROM_data structure definition according to System EEPROM Data Format.
1392 - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
1395 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
1397 commit 6bee764bd6da510a4aad614880300c968bc7318d
1398 Author: Timur Tabi <timur@freescale.com>
1399 Date: Wed Jan 16 15:48:12 2008 -0600
1401 86xx: enable command-line editing
1403 Enable command-line editing for all MPC86xx boards.
1405 Signed-off-by: Timur Tabi <timur@freescale.com>
1407 commit 80ddd22626d321a772ebfba304eb7830cb4f6bac
1408 Author: Ben Warren <biggerbadderben@gmail.com>
1409 Date: Wed Jan 16 22:37:42 2008 -0500
1411 Implement hard SPI driver on MPC8349EMDS
1413 This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
1414 This board has an ST M25P40 4Mbit EEPROM on its SPI bus
1416 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1417 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1419 commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
1420 Author: Ben Warren <biggerbadderben@gmail.com>
1421 Date: Wed Jan 16 22:37:35 2008 -0500
1423 Add support for a Freescale non-CPM SPI controller
1425 This patch adds support for the SPI controller found on Freescale PowerPC
1426 processors such as the MCP834x family. Additionally, a new config option,
1427 CONFIG_HARD_SPI, is added for general purpose SPI controller use.
1429 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1430 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1432 commit a8cb43a89be6cfd283257a603dd9841503ccce0f
1433 Author: Dave Liu <r63238@freescale.com>
1434 Date: Thu Jan 17 18:23:19 2008 +0800
1436 mpc83xx: Fix the fatal conflict of merge
1438 The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
1439 will cause the mpc8315erdb board can't boot up.
1441 The patch fix that bug, and remove the duplicated #ifdef
1442 CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
1445 Signed-off-by: Dave Liu <daveliu@freescale.com>
1446 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1448 commit 3259eeaa4148125a81417477f62c05bd67f60587
1449 Author: Larry Johnson <lrj@acm.org>
1450 Date: Thu Jan 17 08:50:09 2008 -0500
1452 Merge Sequoia beautification into Korat code
1454 Signed-off-by: Larry Johnson <lrj@acm.org>
1456 commit e16925773211291b562e77187061e9dd1d757217
1457 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1458 Date: Thu Jan 17 07:45:05 2008 +0100
1460 net: add 'ethrotate' environment variable
1462 [PATCH] net: add 'ethrotate' environment variable
1464 This patch replaces the buildtime configuration option
1465 CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
1466 configuration veriable. See README.
1468 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1469 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1471 commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f
1472 Author: Stefan Roese <sr@denx.de>
1473 Date: Thu Jan 17 14:29:04 2008 +0100
1475 ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
1477 Signed-off-by: Stefan Roese <sr@denx.de>
1479 commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d
1480 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1481 Date: Thu Jan 17 18:07:32 2008 +0900
1483 sh: Remove CONFIG_COMMANDS from MS7720SE config file
1485 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1487 commit 055606bd25e88c0cd04ad348a679a04b1b616bee
1488 Author: Niklaus Giger <niklaus.giger@netstal.com>
1489 Date: Wed Jan 16 18:39:20 2008 +0100
1491 ppc4xx: Netstal HCU4 board: added various fixes and POST
1493 - Moved some common code to netstal/common/nm_bsp.c.
1494 - sdram initialisation goes go netstal/common/fixed_sdram.c.
1495 - Added support for POST.
1496 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
1498 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
1500 commit 69b0634a4ee98c9791815600d43b99f626a952f3
1501 Author: Niklaus Giger <niklaus.giger@netstal.com>
1502 Date: Thu Jan 17 12:53:56 2008 +0100
1504 ppc4xx: netstal/common define routines used by all boards
1506 Added some routines used by all Netstal boards:
1507 - nm_bsp.c: - nm_show_print and
1508 - common_misc_init_r
1509 - set_params_for_sw_install. Very specific code to handle our SW
1510 installation procedure
1511 - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
1512 to handle sdram initialization.
1513 - nm.h: Common header
1515 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
1517 commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8
1518 Author: Niklaus Giger <niklaus.giger@netstal.com>
1519 Date: Wed Jan 16 18:39:18 2008 +0100
1521 ppc4xx: Netstal HCU5 board: added various fixes and POST
1523 - Moved some common code to nestal/common/nm_bsp.c.
1524 - Added support for the vxWorks EDR.
1525 - Enable trace for Lauterbach, if present.
1526 - Added support for POST.
1527 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
1529 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
1531 commit 4371090e5da77edc7bf9f296364db4801639d9c4
1532 Author: Niklaus Giger <niklaus.giger@netstal.com>
1533 Date: Wed Jan 16 18:39:08 2008 +0100
1535 ppc4xx: Netstal HCU5 board. Added POST. Various fixes
1538 - Reduced rom_size from 384 to 320 kB
1539 - Environment is now in flash
1543 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
1545 commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7
1546 Author: Niklaus Giger <niklaus.giger@netstal.com>
1547 Date: Wed Jan 16 18:37:50 2008 +0100
1549 ppc4xx: Netstal HCU4 board. Added POST. Various fixes
1552 - Reduced rom_size from 384 to 320 kB
1553 - Environment is now in flash
1557 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
1559 commit 1a3ac86b79fcb690275c85861c8efa6a3899060a
1560 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1561 Date: Thu Jan 17 10:53:08 2008 +0100
1563 ppc4xx: Complete DU440 board support
1565 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1567 commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f
1568 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1569 Date: Thu Jan 17 10:52:30 2008 +0100
1571 ppc4xx: Add DU440 board support
1573 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1575 commit ac331da07db3860f11fa1d0fd3db7c810bce1198
1576 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1577 Date: Thu Jan 17 15:53:52 2008 +0900
1579 sh: Update SuperH SCIF driver
1581 This patch fixed wrong SH7720 CPU macro and changed macro that
1582 calculated value of SCBRR register.
1584 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1586 commit 334e442e6fac59be91244063e9b3f6ca25e8daf8
1587 Author: Grzegorz Bernacki <gjb@semihalf.com>
1588 Date: Wed Jan 16 15:12:47 2008 +0100
1590 Set ips dividor to 1/4 of csb clock.
1592 Previous setting cause ips clock to be out of spec. This bug was found by John
1593 Rigby from Freescale.
1595 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
1597 commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89
1598 Author: Kumar Gala <galak@kernel.crashing.org>
1599 Date: Thu Jan 17 02:19:18 2008 -0600
1601 85xx: Get ride of old TLB setup code
1603 Now that all boards have been converted, remove old config code and the
1604 config option for the new style.
1606 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1608 commit 3b558e26a5ef31635787d6d6e97d70939d4f892d
1609 Author: Kumar Gala <galak@kernel.crashing.org>
1610 Date: Thu Jan 17 02:02:10 2008 -0600
1612 85xx: Convert TQM85xx to new TLB setup
1614 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1616 commit 74121b470c14f7eaf284ee838bffca6f9521069e
1617 Author: Kumar Gala <galak@kernel.crashing.org>
1618 Date: Thu Jan 17 01:56:32 2008 -0600
1620 85xx: Convert STXGP3 & STXSSA to new TLB setup
1622 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1624 commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0
1625 Author: Kumar Gala <galak@kernel.crashing.org>
1626 Date: Thu Jan 17 01:44:34 2008 -0600
1628 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
1630 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1632 commit 818218bac6a11591e2542c344d2330e0f4e1968b
1633 Author: Kumar Gala <galak@kernel.crashing.org>
1634 Date: Thu Jan 17 01:31:34 2008 -0600
1636 85xx: Convert PM854/PM856 to new TLB setup
1638 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1640 commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0
1641 Author: Kumar Gala <galak@kernel.crashing.org>
1642 Date: Thu Jan 17 01:25:33 2008 -0600
1644 85xx: Convert MPC8540EVAL to new TLB setup
1646 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1648 commit 73aa9ac2b46f1cfd039106ebd6b9865016005234
1649 Author: Kumar Gala <galak@kernel.crashing.org>
1650 Date: Thu Jan 17 01:12:22 2008 -0600
1652 85xx: Convert MPC8568 MDS to new TLB setup
1654 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1656 commit 0db37dc2eed30884db2daa24dbd9a113b5d00610
1657 Author: Kumar Gala <galak@kernel.crashing.org>
1658 Date: Thu Jan 17 01:01:09 2008 -0600
1660 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
1662 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1664 commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc
1665 Author: Kumar Gala <galak@kernel.crashing.org>
1666 Date: Thu Jan 17 00:52:29 2008 -0600
1668 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
1670 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1672 commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8
1673 Author: Kumar Gala <galak@kernel.crashing.org>
1674 Date: Thu Jan 17 00:32:17 2008 -0600
1676 85xx: Convert ATUM8548 to new TLB setup
1678 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1680 commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab
1681 Author: Kumar Gala <galak@kernel.crashing.org>
1682 Date: Wed Jan 16 23:11:57 2008 -0600
1684 85xx: Convert MPC8544 DS to new TLB setup
1686 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1688 commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee
1689 Author: Kumar Gala <galak@kernel.crashing.org>
1690 Date: Wed Jan 16 22:38:34 2008 -0600
1692 85xx: Reworked initial processor init
1694 Reworked the initial processor initialzation sequence:
1695 * introduced cpu_early_init_f that is run in address space 1 (AS=1)
1696 * Moved TLB/LAW and CCSR init into cpu_early_init_f()
1697 * Reworked initial asm code to do most of the core init before TLBs
1699 The main reasons for these changes are to allow handling of 36-bit phys
1700 addresses in the future and some of the issues that will exist when we
1703 There are a few caveats on what can be initialized via the LAW and TLB
1705 * TLB entry 14/15 can't be initialized via the TLB table
1706 * any LAW that covers the implicit boot window (4G-8M to 4G) must map to
1707 the code that is currently executing.
1709 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1711 commit 44a23cfd6360a68eaa41f945190618a55519eac3
1712 Author: Kumar Gala <galak@kernel.crashing.org>
1713 Date: Wed Jan 16 22:33:22 2008 -0600
1715 85xx: Introduce new tlb API
1717 Add a set of functions to manipulate TLB entries:
1718 * set_tlb() - write a tlb entry
1719 * invalidate_tlb() - invalidate a tlb array
1720 * disable_tlb() - disable a variable size tlb entry
1721 * init_tlbs() - setup initial tlbs based on static table
1723 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1725 commit be88b1699863c262818f3af7f60173b4d48df8fc
1726 Author: Stefan Roese <sr@denx.de>
1727 Date: Thu Jan 17 07:50:17 2008 +0100
1729 ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
1731 Signed-off-by: Stefan Roese <sr@denx.de>
1733 commit c8c41d4a80b1a8ad5984a287d81ea780496259f8
1734 Author: Kumar Gala <galak@kernel.crashing.org>
1735 Date: Wed Jan 16 10:04:42 2008 -0600
1737 85xx: Use proper defines for PCI addresses
1739 We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
1740 While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
1741 be used for configuring the PCI ATMU.
1743 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1745 commit 54a5070115eff38e9b324b78abdfa0b4520580b9
1746 Author: Kumar Gala <galak@kernel.crashing.org>
1747 Date: Wed Jan 16 09:22:29 2008 -0600
1749 85xx: Remove old style of LAW init
1751 All boards are now using the new fsl_law code so we can drop the old version.
1753 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1755 commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f
1756 Author: Kumar Gala <galak@kernel.crashing.org>
1757 Date: Wed Jan 16 09:15:29 2008 -0600
1759 85xx: convert remaining 85xx boards over to use new LAW init code
1761 Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
1762 to use new LAW init code.
1764 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1766 commit 572b13afc42710f2957c382a710360429c0e099b
1767 Author: Kumar Gala <galak@kernel.crashing.org>
1768 Date: Wed Jan 16 09:11:53 2008 -0600
1770 85xx: convert STXGP3/STXSSA over to use new LAW init code
1772 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1774 commit 45f2166ac0233a9263058378f39612bd11f61196
1775 Author: Kumar Gala <galak@kernel.crashing.org>
1776 Date: Wed Jan 16 09:06:48 2008 -0600
1778 85xx: convert PM854/PM856 over to use new LAW init code
1780 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1782 commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a
1783 Author: Kumar Gala <galak@kernel.crashing.org>
1784 Date: Wed Jan 16 09:05:27 2008 -0600
1786 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
1788 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1790 commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa
1791 Author: Kumar Gala <galak@kernel.crashing.org>
1792 Date: Wed Jan 16 01:45:10 2008 -0600
1794 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
1796 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1798 commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238
1799 Author: Kumar Gala <galak@kernel.crashing.org>
1800 Date: Wed Jan 16 01:32:06 2008 -0600
1802 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
1804 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1806 commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75
1807 Author: Kumar Gala <galak@kernel.crashing.org>
1808 Date: Wed Jan 16 01:16:16 2008 -0600
1810 85xx: convert MPC8544 DS over to use new LAW init code
1812 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1814 commit 83d40dfd79fe868796275802f60116d84b9e4395
1815 Author: Kumar Gala <galak@kernel.crashing.org>
1816 Date: Wed Jan 16 01:13:58 2008 -0600
1818 85xx: Move LAW init code into C
1820 Move the initialization of the LAWs into C code and provide an API
1821 to allow modification of LAWs after init.
1823 Board code is responsible to provide a law_table and num_law_entries.
1825 We should be able to use the same code on 86xx as well.
1827 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1829 commit bed8ce838a609aaab136d43b25e6df2a520bc854
1830 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1831 Date: Sat Dec 22 15:03:12 2007 +0100
1833 qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
1835 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1837 commit 0764c164fed6277d359cf132d55187ea34290114
1838 Author: Vlad Lungu <vlad@comsys.ro>
1839 Date: Wed Jan 16 19:27:51 2008 +0200
1841 MIPS:Target support for qemu -M mips
1843 With serial, NE2000, IDE support. Tested in big-endian mode.
1844 Memory size hard-coded to 128M for now, so don't play with
1847 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
1849 commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f
1850 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1851 Date: Fri Jan 11 00:01:37 2008 +0100
1853 Fix nfs command help to reflect that the serverip is optional
1855 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1856 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1858 commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b
1859 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1860 Date: Mon Dec 10 22:32:14 2007 +0100
1862 bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr
1864 and move is_valid_ether_addr board file
1866 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1867 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1869 commit c2f896b8fc4722e36915903e1942e138e68ce804
1870 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
1871 Date: Wed Jan 16 16:13:31 2008 +0900
1873 drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).
1875 rx_status on the memory is basically in LE, but needs to be handled in CPU
1876 endian. le32_to_cpu() takes up this mission. Even if on the sane hardware,
1879 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
1880 Cc: Masami Komiya <mkomiya@sonare.it>
1881 Cc: Lucas Jin <lucasjin@gmail.com>
1882 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1884 commit 96a236746fe6a7b84802afb4ed31536696d34812
1885 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
1886 Date: Wed Jan 16 16:12:26 2008 +0900
1888 drivers/net/rtl8139.c: Fix cache coherency issues
1890 Current driver is meant for cache coherent systems. This patch adds
1891 flush_cache() routines to support cache non-coherent systems.
1893 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
1894 Cc: Masami Komiya <mkomiya@sonare.it>
1895 Cc: Lucas Jin <lucasjin@gmail.com>
1896 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1898 commit d1276c76c1e2b5035296689280ba1acb2c425104
1899 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
1900 Date: Wed Jan 16 16:11:14 2008 +0900
1902 drivers/net/rtl8139.c: Fix tx timeout
1904 "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
1905 does, the condition "(currticks() < to)" becomes invalid and immediately
1906 leads to tx timeout error. This patch introduces the fine-graded udely(10)
1907 loops to ease the impact of wrapping around.
1909 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
1910 Cc: Masami Komiya <mkomiya@sonare.it>
1911 Cc: Lucas Jin <lucasjin@gmail.com>
1912 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1914 commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a
1915 Author: Dave Liu <r63238@freescale.com>
1916 Date: Fri Jan 11 18:45:28 2008 +0800
1918 TSEC: Add the support for RealTek RTL8211B PHY
1920 Add the support of RealTek RTL8211B PHY, the RTL8211B
1921 PHY only supports RGMII and MII mode.
1923 Signed-off-by: Dave Liu <daveliu@freescale.com>
1924 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1926 commit 84a3047b72b70e862b0b7a8e2058077457f89a32
1927 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
1928 Date: Wed Jan 16 09:40:41 2008 +0100
1930 Remove annoying debug printout for PHY less boards.
1932 PHY less board prints out lots of "read wrong ...":
1933 read wrong value : mii_id 3,mii_reg 2, base e0102320
1934 read wrong value : mii_id 3,mii_reg 3, base e0102320
1935 UEC: PHY is Generic MII (ffffffff)
1936 read wrong value : mii_id 3,mii_reg 4, base e0102320
1937 read wrong value : mii_id 3,mii_reg 0, base e0102320
1938 read wrong value : mii_id 3,mii_reg 1, base e0102320
1939 read wrong value : mii_id 3,mii_reg 1, base e0102320
1940 read wrong value : mii_id 3,mii_reg 5, base e0102320
1941 read wrong value : mii_id 3,mii_reg 1, base e0102320
1942 read wrong value : mii_id 3,mii_reg 1, base e0102320
1943 read wrong value : mii_id 3,mii_reg 5, base e0102320
1944 FSL UEC0: Full Duplex
1945 FSL UEC0: Speed 100BT
1946 FSL UEC0: Link is up
1947 Using FSL UEC0 device
1949 Make this printout depend on UEC_VERBOSE_DEBUG and
1950 remove its definition in uec_phy.c
1952 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
1953 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1955 commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6
1956 Author: Kim Phillips <kim.phillips@freescale.com>
1957 Date: Tue Jan 15 14:11:00 2008 -0600
1959 net: reduce boot latency on QE UEC based boards
1961 actually polling for PHY autonegotiation to finish enables us to remove the
1962 5 second boot prompt latency present on QE based boards.
1964 call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from
1965 uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait
1966 code shamelessly stolen from tsec driver.
1968 also rm unused CONFIG_RMII_MODE code.
1970 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1971 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
1972 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1974 commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3
1975 Author: michael.firth@bt.com <michael.firth@bt.com>
1976 Date: Wed Jan 16 11:40:51 2008 +0000
1978 TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus
1980 The current TSEC driver limits MDIO access to the devices that have been configured as attached
1981 to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.
1983 Signed-off-by: Michael Firth <michael.firth@bt.com>
1984 Acked-by: Andy Fleming <afleming@freescale.com>
1985 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1987 commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3
1988 Author: Kim Phillips <kim.phillips@freescale.com>
1989 Date: Wed Jan 16 00:38:05 2008 -0600
1991 Add support for the MPC837xERDB
1993 MPC837xERDB board support includes:
1994 * DDR2 330MHz hardcoded (soldered on the board)
1995 * Local Bus NOR Flash
1997 * eTSEC RGMII (TSEC0 - RTL8211B with MII;
1998 * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware
2001 Signed-off-by: Kevin Lam <kevin.lam@freescale.com>
2002 Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
2003 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2005 commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
2006 Author: Kim Phillips <kim.phillips@freescale.com>
2007 Date: Wed Jan 16 12:06:16 2008 -0600
2009 mpc83xx: add support for more system clock performance controls
2011 System registers that are modified are the Arbiter Configuration
2012 Register (ACR), the System Priority Control Register (SPCR), and the
2013 System Clock Configuration Register (SCCR).
2015 Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com>
2016 Signed-off by: Joe D'Abbraccio <ljd015@freescale.com>
2017 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2019 commit 16c3cde050e2d243e62b37486f1558570787beb8
2020 Author: James Yang <james.yang@freescale.com>
2021 Date: Wed Jan 16 11:58:08 2008 -0600
2023 FSL: Generalize PIXIS reset command parsing.
2025 Before, the order of arguments to the pixis_reset
2026 command needed to be supplied in a hard-coded order.
2027 Generalize the command parsing to allow any order.
2029 Signed-off-by: James Yang <james.yang@freescale.com>
2030 Acked-by: Jon Loeliger <jdl@freescale.com>
2032 commit ad8f8687b78c3e917b173f038926695383c55555
2033 Author: Jon Loeliger <jdl@freescale.com>
2034 Date: Tue Jan 15 13:42:41 2008 -0600
2036 FSL: Convert board/freescale/common/Makefile to use CONFIG_
2038 Convert the board/freescale/common/Makefile to use
2039 CONFIG_* options to select which files to conditionally
2040 compile into the board/freescale/common library rather
2041 than conditionally compiling entire files.
2048 CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.
2050 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2052 commit 7c2221eb230372a9e537c4f6636b147b0909325f
2053 Author: Roy Zang <tie-fei.zang@freescale.com>
2054 Date: Tue Jan 15 16:38:38 2008 +0800
2056 Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver
2058 Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver.
2059 Remove unused ethernet CONFIG_ options.
2061 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2062 Acked-by: Jon Loeliger <jdl@freescale.com>
2064 commit 711a7946277d2e29af481011e8635e9975c54e45
2065 Author: Kim Phillips <kim.phillips@freescale.com>
2066 Date: Tue Jan 15 14:05:14 2008 -0600
2068 mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
2070 continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601
2072 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2074 commit 363eea9ff7f19a2cba17f262bd17559f166e134e
2075 Author: Kim Phillips <kim.phillips@freescale.com>
2076 Date: Tue Jan 15 09:51:12 2008 -0600
2078 mpc83xx: clean up mpc8360emds.c warnings
2080 mpc8360emds.c: In function 'ft_board_setup':
2081 mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
2082 mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
2083 mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
2084 mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
2085 mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
2086 mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
2088 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2090 commit f09880ea72a1c806db223ce594c5fb1b6542ff6a
2091 Author: Kim Phillips <kim.phillips@freescale.com>
2092 Date: Mon Jan 14 16:14:46 2008 -0600
2094 mpc83xx: fix phy-connection-type fixup code
2096 use tree passed to us in local blob, not global fdt.
2098 Also use fdt_path_offset to convert to relative offset, since absolute
2099 reference is needed to check for rgmii-id mode string value.
2101 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2103 commit 2b4c952be7c4357a13e839d48df80853820c33eb
2104 Author: Kumar Gala <galak@kernel.crashing.org>
2105 Date: Mon Jan 14 09:01:40 2008 -0600
2107 mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
2109 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2110 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2112 commit e1d8ed2c08da14b168658cc5fa78529d461aea70
2113 Author: Poonam Aggrwal <b10812@freescale.com>
2114 Date: Mon Jan 14 09:41:14 2008 +0530
2116 Changes in uboot DDR configuration for MPC8313eRDB
2118 These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
2119 DDR configuration in u-boot code. Some are related to performance, some
2120 affect stability and some correct few basic errors in the current
2123 The changes have been tested and found to give better memory latency
2124 figures on MPC8313eRDB.LMBench figures prove it.
2128 - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
2129 (this may improve performance for application with many read
2130 or write to open pages).
2131 - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
2132 001 (activating all the CS when only one is used may cause
2133 unwanted noise on the system)
2135 - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
2137 - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
2139 - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
2140 comply with the 3 ODT clk requirements)
2141 - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
2142 - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
2144 - DDR_SDRAM_MODE[AL]changed from 0 to 1.
2145 - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
2147 - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
2148 - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
2150 The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
2151 The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf
2153 Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com>
2154 Cc: Bill HighSmith <Bill.Highsmith@freescale.com>
2155 Cc: Razzaz Mazyar <MRazzaz@freescale.com>
2156 Cc: Josep P J <PJ.Joseph@freescale.com>
2157 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2159 commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95
2160 Author: Jerry Van Baren <gvb.uboot@gmail.com>
2161 Date: Sat Jan 12 13:24:14 2008 -0500
2163 Enable the isdram command on the MPC8360EMDS board
2165 The isdram command prints out decoded information the "serial presence
2166 detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when
2167 debugging memory configuration problems.
2169 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2170 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2172 commit 8bd522ce4afda3d4868ee8c913f5394094326be1
2173 Author: Dave Liu <r63238@freescale.com>
2174 Date: Fri Jan 11 18:48:24 2008 +0800
2176 mpc83xx: Add the support for MPC8315ERDB board
2179 - Boot from NOR Flash
2180 - DDR2 266MHz hardcoded configuration
2181 - Local bus NOR Flash R/W operation
2182 - I2C, UART, MII and RTC
2186 Signed-off-by: Dave Liu <daveliu@freescale.com>
2187 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2189 commit b05884efa614e4d8a9413158fc228e0dc02ab704
2190 Author: Dave Liu <r63238@freescale.com>
2191 Date: Fri Jan 11 18:46:50 2008 +0800
2193 mpc83xx: Add config of eTSEC emergency priority in SPCR
2195 The TSEC emergency priority definition of 831x/837x
2196 is different than the definition of 834x in SPCR register.
2198 Add the other config of TSEC emergency priority into
2201 Signed-off-by: Dave Liu <daveliu@freescale.com>
2202 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2204 commit 9b958234b0783f13d92f007f753fd2c3ae2c8680
2205 Author: Dave Liu <r63238@freescale.com>
2206 Date: Fri Jan 11 18:42:19 2008 +0800
2208 mpc83xx: Remove cache config from MPC8360ERDK.h
2210 The MPC8360ERDK board support patch is added before
2211 the commit 2c5b48fc205c3e2752910da8f39209ed075929e5
2212 so, miss clean up it.
2214 The patch clean up the miss cache config.
2216 Signed-off-by: Dave Liu <daveliu@freescale.com>
2217 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2219 commit cd9d23053d435c08fc8695017b5cb9003fcda786
2220 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2221 Date: Mon Jan 14 23:09:32 2008 +0300
2223 nand: FSL UPM NAND driver
2225 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2227 commit 6cb2239ae76faee64434286c4f8fc71374702dd2
2228 Author: Kyungmin Park <kmpark@infradead.org>
2229 Date: Tue Jan 15 08:59:44 2008 +0900
2231 OneNAND: Separate U-Boot dependent code from OneNAND
2233 OneNAND: Separate U-Boot dependent code from OneNAND
2235 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2237 commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164
2238 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2239 Date: Wed Jan 16 10:33:46 2008 +0100
2241 ppc4xx: Sequoia coding style cleanup and beautification
2243 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2245 commit 4b3cc6ece9c455504cf12909fae38d085d848ac0
2246 Author: Larry Johnson <lrj@acm.org>
2247 Date: Tue Jan 15 14:35:58 2008 -0500
2249 ppc4xx: Refactor ECC POST for AMCC Denali core
2251 The ECC POST reported intermittent failures running after power-up on
2252 the Korat PPC440EPx board. Even when the test passed, the debugging
2253 output occasionally reported additional unexpected ECC errors.
2255 This refactoring has three main objectives: (1) minimize the code
2256 executed with ECC enabled during the tests, (2) add more checking of the
2257 results so any unexpected ECC errors would cause the test to fail, and
2258 (3) use synchronization (only) where required by the processor.
2260 Signed-off-by: Larry Johnson <lrj@acm.org>
2262 commit 2465665b73ac2f688af945b1ed510752afa816a4
2263 Author: David Saada <David.Saada@ecitele.com>
2264 Date: Tue Jan 15 10:40:24 2008 +0200
2266 QE UEC: Extend number of supported UECs to 4
2268 This patch extends the number of supported UECs to 4. Note that the
2269 problem of QE thread resources exhaustion is resolved by setting the
2270 correct number of QE threads according to Ethernet type (GBE or FE).
2272 Signed-off-by: David Saada <david.saada@ecitele.com>
2273 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2275 commit 58d204256cb1ce1bd323847d9f644acf70a72e6a
2276 Author: Wolfgang Denk <wd@denx.de>
2277 Date: Wed Jan 16 00:01:01 2008 +0100
2279 LWMON5: enable hush shell as command line parser
2281 Signed-off-by: Wolfgang Denk <wd@denx.de>
2283 commit 66ffb1883feedddc813d8a507d060f2a940eb2b2
2284 Author: Wolfgang Denk <wd@denx.de>
2285 Date: Tue Jan 15 17:22:28 2008 +0100
2287 ADS5121: disable watchdog; enable image timestamps
2289 Signed-off-by: Wolfgang Denk <wd@denx.de>
2291 commit 2b4f778fe9d1de61d7445bae7b325340aba6968d
2292 Author: Wolfgang Denk <wd@denx.de>
2293 Date: Tue Jan 15 17:21:28 2008 +0100
2295 TK885D: fixes for bigger flash sector sizes on new modules;
2296 adjust default environment;
2297 disable SCC ethernet (not used on this board).
2299 Signed-off-by: Wolfgang Denk <wd@denx.de>
2301 commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607
2302 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2303 Date: Tue Jan 15 17:48:13 2008 +0900
2305 pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver
2307 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2309 commit 76e49aa7fb8e76cc49092c1acd53fff921e26360
2310 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2311 Date: Tue Jan 15 23:25:25 2008 +0900
2313 sh: Add support SH7710/SH7712
2315 SH7710/SH7712 of SH3 CPU are supported.
2316 SH771X is called SH-Ether, and has the Ether controller in CPU.
2317 The driver of Ether is not included in this patch.
2319 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2321 commit 63a11be68306870e04d3851ed9fa41955cdf4894
2322 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2323 Date: Tue Jan 15 23:06:17 2008 +0900
2325 sh: Add support of map_physmem() and unmap_physmem() to SuperH
2327 This patch add the support of map_physmem() and unmap_physmem()
2328 used with Common Flash Interface(CFI) driver.
2330 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2332 commit db3995fe5164ac5d630b7ecb96286a9828dfbb54
2333 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2334 Date: Wed Jan 9 14:42:27 2008 +0900
2336 sh: Add maintainer of MS7720SE to the MAINTAINER file
2338 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2340 commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3
2341 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2342 Date: Wed Jan 9 14:39:58 2008 +0900
2344 sh: Fix board name in MS7720SE's config.mk
2346 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2348 commit c0a04d93734d768b39dbb72fb501b65614c8615d
2349 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2350 Date: Wed Jan 9 14:37:36 2008 +0900
2352 sh: Add MS7720SE to MAKEALL
2354 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2356 commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae
2357 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2358 Date: Mon Dec 3 22:58:50 2007 +0900
2360 sh: Add support for MS7720RP02 board
2362 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2363 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2364 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2366 commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed
2367 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2368 Date: Wed Jan 9 14:30:02 2008 +0900
2370 sh: Add support for SH7720 in serial_sh driver.
2372 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2373 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2374 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2376 commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403
2377 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2378 Date: Mon Dec 3 22:58:45 2007 +0900
2380 sh: Add support SH3 and SH7720
2382 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2383 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2384 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2386 commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd
2387 Author: Stefan Roese <sr@denx.de>
2388 Date: Tue Jan 15 10:11:02 2008 +0100
2390 ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c
2392 Signed-off-by: Stefan Roese <sr@denx.de>
2394 commit 17bef68097ab3692500a36fb31115bff7910aa99
2395 Author: Niklaus Giger <niklausgiger@gmx.ch>
2396 Date: Mon Jan 14 14:04:42 2008 +0100
2398 ppc_4xx: Fix post spr.c for PPC405
2400 post/cpu/ppc4xx/spr.c contained a few checks for registers only present
2401 for PPC440 and derivates processor.
2403 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
2405 commit 06c428bcd4413014b43236e77765022071424fa6
2406 Author: Dave Liu <r63238@freescale.com>
2407 Date: Mon Jan 14 11:12:01 2008 +0800
2409 QE: fix compile warning
2411 qe.c: In function 'qe_upload_firmware':
2412 qe.c:390: warning: pointer targets in passing argument 2
2413 uec.c: In function 'uec_initialize':
2414 uec.c:1236: warning: 'uec_info' may be used uninitialized
2416 Signed-off-by: Dave Liu <daveliu@freescale.com>
2418 commit a0dd99d51efa55fe023e19c97ead92683725eb11
2419 Author: Stefan Roese <sr@denx.de>
2420 Date: Mon Jan 14 10:05:05 2008 +0100
2422 ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
2424 Now that bit 29 is the USB PHY reset bit, update the Kilauea port
2425 to remove the USB PHY reset after powerup. The CPLD will keep the
2426 USB PHY in reset (active low) until the bit is set to 1 in
2427 board_early_init_f().
2429 Signed-off-by: Stefan Roese <sr@denx.de>
2431 commit f43ad53908f1ea83a7c26c3505bbe84382e47aad
2432 Author: Wolfgang Denk <wd@denx.de>
2433 Date: Sun Jan 13 23:26:45 2008 +0100
2435 ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
2437 Signed-off-by: Wolfgang Denk <wd@denx.de>
2439 commit 8d103071b7b0e3ec888859bfcb9d422565e6d750
2440 Author: Wolfgang Denk <wd@denx.de>
2441 Date: Sun Jan 13 23:37:50 2008 +0100
2443 ADS5121: Fix typo in ads5121.c, adjust default environment
2445 Signed-off-by: Wolfgang Denk <wd@denx.de>
2447 commit 51b67d06faa670c65de6f29ec5b5aace74b2a047
2448 Author: John Rigby <jrigby@freescale.com>
2449 Date: Fri Aug 24 18:18:43 2007 -0600
2451 ADS5121: MAX slew rate for PATA pins
2453 Signed-off-by: John Rigby <jrigby@freescale.com>
2455 commit dd531aac34aaad138f16cacdb51d61908d59c0e2
2456 Author: Wolfgang Denk <wd@denx.de>
2457 Date: Sun Jan 13 21:05:52 2008 +0100
2459 Fix Makefile dependency problem with parallel builds.
2461 Signed-off-by: Wolfgang Denk <wd@denx.de>
2463 commit 89967841e3ea02e3d0e5e1295ab687576e5b1089
2464 Author: Wolfgang Denk <wd@denx.de>
2465 Date: Sun Jan 13 19:51:39 2008 +0100
2467 MPC8544DS: fix board Makefile for silent build (with -s)
2469 Signed-off-by: Wolfgang Denk <wd@denx.de>
2471 commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88
2472 Author: Wolfgang Denk <wd@denx.de>
2473 Date: Sun Jan 13 16:44:08 2008 +0100
2475 PMC440 board: fix board Makefile for out-of-tree building
2477 Signed-off-by: Wolfgang Denk <wd@denx.de>
2479 commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2
2480 Author: Wolfgang Denk <wd@denx.de>
2481 Date: Sun Jan 13 16:07:44 2008 +0100
2483 Makalu: fix compile warning
2485 Signed-off-by: Wolfgang Denk <wd@denx.de>
2487 commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0
2488 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2489 Date: Sun Jan 13 12:36:12 2008 +0100
2491 cmd_nand : fix compiler warning.
2493 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2495 commit 8225d1e3ac0ab147cdde4b0042812583380afb8a
2496 Author: Michael Schwingen <rincewind@discworld.dascon.de>
2497 Date: Sat Jan 12 20:29:47 2008 +0100
2499 CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
2501 Signed-off-by: Michael Schwingen <michael@schwingen.org>
2502 Acked-by: Stefan Roese <sr@denx.de>
2504 commit 2b2f43ed6a30ece77f76191c845ac95267daa31a
2505 Author: Wolfgang Denk <wd@denx.de>
2506 Date: Sun Jan 13 02:19:44 2008 +0100
2508 MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
2510 Signed-off-by: Wolfgang Denk <wd@denx.de>
2512 commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d
2513 Author: Wolfgang Denk <wd@denx.de>
2514 Date: Sun Jan 13 02:19:13 2008 +0100
2516 MPC8xx FEC driver: fix compiler warning.
2518 Signed-off-by: Wolfgang Denk <wd@denx.de>
2520 commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b
2521 Author: Wolfgang Denk <wd@denx.de>
2522 Date: Sun Jan 13 00:59:21 2008 +0100
2524 Fix Makefile dependencies issues; allow silent build
2526 - get rid of "version" target whichdidn't really work
2527 - make autoconf.mk depend on version_autogenerated.h to make sure
2528 to rebuild files as needed
2529 - add XECHO macro to allow for silent build using "make -s"
2531 Signed-off-by: Wolfgang Denk <wd@denx.de>
2533 commit e343ab83d5135b558aa58db9be8fc7faa68d77ed
2534 Author: Wolfgang Denk <wd@denx.de>
2535 Date: Sun Jan 13 00:55:47 2008 +0100
2537 ADS5121e: fix compile warning
2539 Signed-off-by: Wolfgang Denk <wd@denx.de>
2541 commit f2b6f4610627fe3d607620e25082916a01538875
2542 Author: Wolfgang Denk <wd@denx.de>
2543 Date: Sun Jan 13 00:55:18 2008 +0100
2545 MUNICes: fix board Makefile for remote build directory
2547 Signed-off-by: Wolfgang Denk <wd@denx.de>
2549 commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a
2550 Author: Oliver Weber <almoeli@gmx.de>
2551 Date: Wed Jan 9 17:04:38 2008 +0100
2553 MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
2555 Signed-off-by: Oliver Weber <almoeli@gmx.de>
2557 commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f
2558 Author: Andreas Engel <andreas.engel@ericsson.com>
2559 Date: Wed Jan 9 17:10:56 2008 +0100
2561 Make bootretry work when command line editing is enabled
2563 Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
2564 This patch fixes the problem.
2566 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
2568 commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4
2569 Author: Larry Johnson <lrj@acm.org>
2570 Date: Fri Jan 11 23:26:18 2008 -0500
2572 Refactor code for "i2c sdram" command
2574 Signed-off-by: Larry Johnson <lrj@acm.org>
2576 commit 0df6b8446c4721b91ce311548114891130371083
2577 Author: Larry Johnson <lrj@acm.org>
2578 Date: Thu Jan 10 22:23:39 2008 -0500
2580 Fix "i2c sdram" command for DDR2 DIMMs
2582 Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
2583 "i2c sdram" command. This patch provides correct alternative
2584 interpretations when DDR2 memory is detected.
2586 Signed-off-by: Larry Johnson <lrj@acm.org>
2588 commit 64134f011254123618798ff77c42ba196b2ec485
2589 Author: Wolfgang Denk <wd@denx.de>
2590 Date: Sat Jan 12 20:31:39 2008 +0100
2592 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
2594 With recent toolchain versions, some boards would not build because
2595 or errors like this one (here for ocotea board when building with
2597 ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]
2599 For many boards, the .bss section is big enough that it wraps around
2600 at the end of the address space (0xFFFFFFFF), so the problem will not
2601 be visible unless you use a 64 bit tool chain for development. On
2602 some boards however, changes to the code size (due to different
2603 optimizations) we bail out with section overlaps like above.
2605 The fix is to add the NOLOAD attribute to the .bss and .sbss
2606 sections, telling the linker that .bss does not consume any space in
2609 Signed-off-by: Wolfgang Denk <wd@denx.de>
2611 commit 3afac79ec27b91df185f090b31dad9620779f440
2612 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2613 Date: Fri Jan 11 20:42:58 2008 -0600
2615 USB: Add Philips 1561 PCI-OHCI ids
2616 (needed for M5475EVB)
2618 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
2620 commit 5e8def6731cd7bec74bff42a16b139de04010353
2621 Author: Wolfgang Denk <wd@denx.de>
2622 Date: Sat Jan 12 15:51:34 2008 +0100
2624 Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
2627 Signed-off-by: Heiko Schocher <hs@denx.de>
2628 Signed-off-by: Wolfgang Denk <wd@denx.de>
2630 commit 5d49e0e152a8b81cc0602271e8fd259371f559b7
2631 Author: Grzegorz Bernacki <gjb@semihalf.com>
2632 Date: Fri Jan 11 12:03:43 2008 +0100
2634 MPC512X: Cleanup bus clock names.
2636 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2638 commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d
2639 Author: Grzegorz Bernacki <gjb@semihalf.com>
2640 Date: Tue Jan 8 17:16:59 2008 +0100
2642 MPC512X: Fixed typo in macro name.
2644 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2646 commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363
2647 Author: Grzegorz Bernacki <gjb@semihalf.com>
2648 Date: Tue Jan 8 17:16:15 2008 +0100
2650 ads5121: Added support for FDT.
2652 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2654 commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719
2655 Author: Wolfgang Denk <wd@denx.de>
2656 Date: Sat Jan 12 01:05:50 2008 +0100
2658 Coding Style cleanup; update CHANGELOG.
2660 Signed-off-by: Wolfgang Denk <wd@denx.de>
2662 commit f6db945649e5e9d0c7efe33b507d243cdc86cf03
2663 Author: Heiko Schocher <hs@denx.de>
2664 Date: Fri Jan 11 15:15:17 2008 +0100
2666 Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
2668 Signed-off-by: Timur Tabi <timur@freescale.com>
2669 Signed-off-by: Heiko Schocher <hs@denx.de>
2671 commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c
2672 Author: Heiko Schocher <hs@denx.de>
2673 Date: Fri Jan 11 15:15:16 2008 +0100
2675 MUNICes: Set the right CFG_DEFAULT_MBAR value.
2677 Signed-off-by: Heiko Schocher <hs@denx.de>
2679 commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2
2680 Author: Heiko Schocher <hs@denx.de>
2681 Date: Fri Jan 11 15:15:15 2008 +0100
2683 added the config File for the MUNICes board.
2685 Signed-off-by: Heiko Schocher <hs@denx.de>
2687 commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d
2688 Author: Heiko Schocher <hs@denx.de>
2689 Date: Fri Jan 11 15:15:14 2008 +0100
2691 added basic support for the MUNICes board.
2693 Signed-off-by: Heiko Schocher <hs@denx.de>
2695 commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19
2696 Author: Wolfgang Denk <wd@denx.de>
2697 Date: Sat Jan 12 00:39:37 2008 +0100
2699 Update CHANGELOG and MAINTAINERS files.
2701 Signed-off-by: Wolfgang Denk <wd@denx.de>
2703 commit 5ba7390c3cb579172be66888a371707b47b5be4e
2704 Author: Anatolij Gustschin <agust@denx.de>
2705 Date: Fri Jan 11 02:15:02 2008 +0100
2707 Fix compilation problem in common/cmd_bmp.c
2709 common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
2710 isn't defined. This patch fix this.
2712 Signed-off-by: Anatolij Gustschin <agust@denx.de>
2714 commit 5aa437baae5fe629abeab99bef793a2a1fc71b58
2715 Author: Heiko Schocher <hs@denx.de>
2716 Date: Fri Jan 11 01:12:09 2008 +0100
2718 Fix defaultconfig for the mgcoge board.
2720 Signed-off-by: Heiko Schocher <hs@denx.de>
2722 commit ac9db066b26935f31bff15c98168b19faeb603f3
2723 Author: Heiko Schocher <hs@denx.de>
2724 Date: Fri Jan 11 01:12:08 2008 +0100
2726 Added support for the mgcoge board from keymile.
2728 Signed-off-by: Heiko Schocher <hs@denx.de>
2730 commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818
2731 Author: Heiko Schocher <hs@denx.de>
2732 Date: Fri Jan 11 01:12:07 2008 +0100
2734 Enable SMC microcode relocation patch for SMC1.
2736 Signed-off-by: Heiko Schocher <hs@denx.de>
2738 commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7
2739 Author: Heiko Schocher <hs@denx.de>
2740 Date: Fri Jan 11 01:12:06 2008 +0100
2742 Added support for the mgsuvd board from keymile.
2744 Signed-off-by: Heiko Schocher <hs@denx.de>
2746 commit bf05293973b348f6946c9df92cd3c65ece42d0be
2747 Author: James Yang <james.yang@freescale.com>
2748 Date: Thu Jan 10 16:02:07 2008 -0600
2750 Fix 64-bit vsprintf.
2752 There were some size and unsigned problems.
2753 Also add support for "ll" size modifier in format string like glibc
2755 Signed-off-by: James Yang <James.Yang@freescale.com>
2756 Acked-by: Jon Loeliger <jdl@freescale.com>
2758 commit 92fa37eac530860643afa26ae347af3d23d67309
2759 Author: Larry Johnson <lrj@acm.org>
2760 Date: Wed Jan 9 12:42:35 2008 -0500
2762 Remove superfluous preprocessor conditionals from LM73 driver
2764 (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
2766 (2) Use conditional Makefile.o.
2768 Signed-off-by: Larry Johnson <lrj@acm.org>
2770 commit efc6f447c1b940d1650c4b854c5598a595ddc3da
2771 Author: Guennadi Liakhovetski <lg@denx.de>
2772 Date: Thu Jan 10 17:59:07 2008 +0100
2774 Add support for the TK885D baseboard from TELE-DATA
2776 The TK885D board uses a TQM885D module from TQ, this port adds an
2777 own configuration file and adds a last_stage_init() method to
2778 configure the two PHYs, depending on the phy_auto_nego environment
2781 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2783 commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89
2784 Author: Kumar Gala <galak@kernel.crashing.org>
2785 Date: Thu Jan 10 02:22:05 2008 -0600
2787 Fix compiler warning
2789 main.c: In function 'readline_into_buffer':
2790 main.c:927: warning: unused variable 'p_buf'
2792 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2794 commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
2795 Author: Anatolij Gustschin <agust@denx.de>
2796 Date: Fri Jan 11 14:30:01 2008 +0100
2798 Add Fujitsu CoralP/Lime video driver
2800 Signed-off-by: Anatolij Gustschin <agust@denx.de>
2801 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
2803 commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058
2804 Author: Anatolij Gustschin <agust@denx.de>
2805 Date: Fri Jan 11 02:39:47 2008 +0100
2807 Fix video console newline and carriage return handling
2809 Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
2810 are not displayed correctly. This is an attempt to fix
2811 this issue. Also add carriage return handling.
2813 Signed-off-by: Anatolij Gustschin <agust@denx.de>
2814 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
2816 commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093
2817 Author: Stefan Roese <sr@denx.de>
2818 Date: Fri Jan 11 15:53:58 2008 +0100
2820 ppc4xx: Fix sdram init on Sequoia boards
2822 Clear possible errors in MCSR resulting from data-eye-search.
2823 If not done, then we could get an interrupt later on when
2824 exceptions are enabled.
2826 Signed-off-by: Stefan Roese <sr@denx.de>
2828 commit d610a60730b7464f6f659db49d264d89a7c71061
2829 Author: Anatolij Gustschin <agust@denx.de>
2830 Date: Fri Jan 11 15:31:09 2008 +0100
2832 ppc4xx: Rework Lime support for lwmon5
2834 Rework Lime support for lwmon5 using new video driver
2836 Signed-off-by: Anatolij Gustschin <agust@denx.de>
2838 commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0
2839 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2840 Date: Fri Jan 11 14:55:16 2008 +0100
2842 ppc4xx: Update PMC440 config file
2844 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2846 commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea
2847 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2848 Date: Fri Jan 11 14:55:08 2008 +0100
2850 ppx4xx: Fix sdram init on PMC440 boards
2852 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2854 commit 061aad4d320dddce26247699dcf2875ee2ea1366
2855 Author: Dave Liu <r63238@freescale.com>
2856 Date: Thu Jan 10 23:09:33 2008 +0800
2858 mpc83xx: Fix the bug of 266MHz data rate DDR
2860 The DDR doesn't work on the 266MHz data rate,
2861 the patch fix the bug.
2863 Signed-off-by: Dave Liu <daveliu@freescale.com>
2864 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2866 commit ded08317ad9e340b887bf2eb46e9565a0f610a93
2867 Author: Dave Liu <r63238@freescale.com>
2868 Date: Thu Jan 10 23:08:26 2008 +0800
2870 mpc83xx: Make the code more readable
2872 Format the code, make it more readable
2874 Signed-off-by: Dave Liu <daveliu@freescale.com>
2875 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2877 commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0
2878 Author: Dave Liu <r63238@freescale.com>
2879 Date: Thu Jan 10 23:07:23 2008 +0800
2881 mpc83xx: Reduce the latency of DDR
2883 Reduce the AL from 2 to 1 clock to improve the performance.
2885 Signed-off-by: Dave Liu <daveliu@freescale.com>
2886 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2888 commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28
2889 Author: Dave Liu <r63238@freescale.com>
2890 Date: Thu Jan 10 23:06:05 2008 +0800
2892 mpc83xx: Fix the wrong definition of MPC8315E
2894 According to the latest user manual of MPC8315E,
2895 1) The SVCOD of HRCWL is different than 837x
2896 2) The SCCR has changes
2898 Signed-off-by: Dave Liu <daveliu@freescale.com>
2899 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2901 commit ec2638ea08a537a1bd409db873aaaa33a053ebae
2902 Author: Dave Liu <r63238@freescale.com>
2903 Date: Thu Jan 10 23:05:00 2008 +0800
2905 mpc83xx: Fix the typo in mpc83xx.h
2907 The SPCR about TSEC priority is wrong.
2909 Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
2910 Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
2911 Signed-off-by: Dave Liu <daveliu@freescale.com>
2912 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2914 commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b
2915 Author: Dave Liu <r63238@freescale.com>
2916 Date: Thu Jan 10 23:04:13 2008 +0800
2918 mpc83xx: Fix the typo in global data struct
2920 Fix the typo in global_data.h
2922 Signed-off-by: Dave Liu <daveliu@freescale.com>
2923 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2925 commit 2c5b48fc205c3e2752910da8f39209ed075929e5
2926 Author: Dave Liu <r63238@freescale.com>
2927 Date: Thu Jan 10 23:03:03 2008 +0800
2929 mpc83xx: Remove cache config from config.h
2931 clean up the cache config from configs.h of board
2933 Signed-off-by: Dave Liu <daveliu@freescale.com>
2934 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2936 commit fab6f556bbbbd1bb35a5433161f7f173c18df559
2937 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2938 Date: Wed Jan 9 20:57:47 2008 +0300
2940 mpc83xx: add support for the MPC8360E-RDK
2942 This is MPC8360E based board with:
2943 - 256MB fixed SDRAM;
2944 - 8MB Intel Strata NOR flash;
2945 - StMICRO 64MiB NAND flash;
2946 - two 10/100/1000 ethernet ports connected via Broadcom
2948 - two 10/100 ethernet ports connected via National
2950 - one PCI and one miniPCI slots;
2951 - four serial ports (two NS16550-compatible, two UCCs);
2952 - four USB ports working through MPC8360E "FHCI" USB controller;
2953 - Fujitsu MB86277 graphics controller;
2954 - Analog to Digital Converter/Touchscreen controller, AD7843
2957 Features not supported in this patch are:
2958 - StMICRO 64MiB NAND flash (patch sent);
2959 - MINT framebuffer initialization (patch is pending);
2960 - Fetching production information from the EEPROM via I2C;
2962 - Two slow UCCs used as RS-485 UARTs.
2964 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2965 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2967 commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb
2968 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
2969 Date: Wed Jan 9 20:57:40 2008 +0300
2971 mpc83xx: add "fsl, qe" compatible fixups
2973 New device trees will use "fsl,qe" compatible properties.
2975 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2976 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2978 commit 977b57583a7c34010e566a09a679ec3c1836f996
2979 Author: Kim Phillips <kim.phillips@freescale.com>
2980 Date: Wed Jan 9 15:24:06 2008 -0600
2982 mpc83xx: add missing CONFIG_HAS_ETH0 defines
2984 the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
2985 is defined; add the define to the missing board configs.
2987 Thanks to Emilian Medve for finding this.
2989 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2991 commit b830b7f1635984ba607219fcbd78597c28eeb529
2992 Author: Becky Bruce <bgill@freescale.com>
2993 Date: Thu Jan 10 14:00:28 2008 -0600
2995 86xx: Support 2GB DIMMs
2997 Configure the number of bits used to address the banks inside the SDRAM
2998 device. The default register value of 0 means 2 bits to address 4 banks.
2999 Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
3001 Signed-off-by: Becky Bruce <bgill@freescale.com>
3003 commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
3004 Author: Niklaus Giger <niklausgiger@gmx.ch>
3005 Date: Thu Jan 10 18:50:33 2008 +0100
3007 ppc4xx: Make Sequoia boot vxWorks
3010 TLB 0 a entry for the Machine Check interrupt
3011 TLB 1 a entry for the RAM
3012 TLB 2 a entry for the EBC
3013 TLB 3 a entry for the boot flash
3015 After changing the baudrate to 9600 I had no problems to boot the
3016 vxWorks image as distributed by WindRiver (Revision 2.0/1 from
3019 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
3021 commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d
3022 Author: Larry Johnson <lrj@arlinx.com>
3023 Date: Wed Jan 9 23:10:27 2008 -0500
3025 ppc4xx: Fix dflush() to restore DVLIM register
3027 Signed-off-by: Larry Johnson <lrj@acm.org>
3029 commit 252f60b068d1f94190b5bcfda169db582387e15e
3030 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3031 Date: Thu Jan 10 03:52:44 2008 -0500
3033 Nios2: remove common/cmd_bdinfo.c unused variable.
3035 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3036 Signed-off-by: Scott McNutt <smcnutt@psyent.com>
3038 commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c
3039 Author: Ben Warren <biggerbadderben@gmail.com>
3040 Date: Wed Jan 9 18:15:53 2008 -0500
3042 Fix Ethernet init() return codes
3044 Change return values of init() functions in all Ethernet drivers to conform
3050 All drivers going forward should return 0 on success. Current drivers that
3051 return 1 on success were left as-is to minimize changes.
3053 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3054 Acked-by: Stefan Roese <sr@denx.de>
3055 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3056 Acked-by: Kim Phillips <kim.phillips@freescale.com>
3057 Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
3058 Acked-By: Timur Tabi <timur@freescale.com>
3060 commit d3a6532cbe263d992f49e86ac95bede28e96f9c8
3061 Author: Wolfgang Denk <wd@denx.de>
3062 Date: Thu Jan 10 00:55:14 2008 +0100
3064 Coding Style cleanup; update CHANGELOG
3066 Signed-off-by: Wolfgang Denk <wd@denx.de>
3068 commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
3069 Author: Kim Phillips <kim.phillips@freescale.com>
3070 Date: Wed Jan 9 16:56:54 2008 -0600
3072 Add QE brg freq and correct qe bus freq fdt update code
3074 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3075 Signed-off-by: Andy Fleming <afleming@freescale.com>
3077 commit 890dfef06c2d169a3356359596890754dfb8ee1c
3078 Author: Andy Fleming <afleming@freescale.com>
3079 Date: Wed Jan 9 16:34:51 2008 -0600
3081 Remove cache config from ATUM8548 and sbc8548 configs
3083 These boards weren't updated by Kumar's config patch because they
3084 weren't in the tree, yet.
3086 Signed-off-by: Andy Fleming <afleming@freescale.com>
3088 commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
3089 Author: Timur Tabi <timur@freescale.com>
3090 Date: Mon Jan 7 13:31:19 2008 -0600
3092 85xx: add ability to upload QE firmware
3094 Define the layout of a binary blob that contains a QE firmware and instructions
3095 on how to upload it. Add function qe_upload_firmware() to parse the blob and
3096 perform the actual upload. Add command-line command "qe fw" to take a firmware
3097 blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
3098 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
3099 'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
3101 Signed-off-by: Timur Tabi <timur@freescale.com>
3103 commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
3104 Author: Kumar Gala <galak@kernel.crashing.org>
3105 Date: Tue Jan 8 01:22:21 2008 -0600
3107 85xx: Remove cache config from configs.h
3109 Either use the standard defines in asm/cache.h or grab the information
3110 at runtime from the L1CFG SPR.
3112 Also, minor cleanup in cache.h to make the code a bit more readable.
3114 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3116 commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
3117 Author: robert lazarski <robertlazarski@gmail.com>
3118 Date: Fri Dec 21 10:39:27 2007 -0500
3120 mpc85xx: Add support for ATUM8548 (updated)
3122 Add support for Instituto Atlantico's ATUM8548 board
3124 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
3125 Signed-off-by: Andy Fleming <afleming@freescale.com>
3127 commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
3128 Author: robert lazarski <robertlazarski@gmail.com>
3129 Date: Fri Dec 21 10:36:37 2007 -0500
3131 mpc85xx: Add support for ATUM8548 (updated)
3133 Add support for Instituto Atlantico's ATUM8548 board
3135 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
3137 commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
3138 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
3139 Date: Thu Dec 13 06:45:14 2007 -0600
3141 mpc85xx: Add support for SBC8548 (updated)
3143 Add support for Wind River's SBC8548 reference board.
3145 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
3147 commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
3148 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
3149 Date: Thu Dec 13 06:45:08 2007 -0600
3151 mpc85xx: Add support for SBC8548 (updated)
3153 Add support for Wind River's SBC8548 reference board.
3155 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
3156 Signed-off by: Andy Fleming <afleming@freescale.com>
3158 commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
3159 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3160 Date: Mon Oct 22 19:58:19 2007 +0400
3162 MPC8568E-MDS: set up QE pario for UART1
3164 To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
3165 be set up appropriately.
3167 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3169 commit ad162249cb371e9e38971676f09be791e5f3cf4a
3170 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3171 Date: Mon Oct 22 18:12:46 2007 +0400
3173 MPC8568E-MDS: reset UCCs to use them reliably
3175 In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
3178 p.s Similar code exists in the Linux kernel board file (for capability
3179 reasons with older U-Boots), but should be removed some day.
3181 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3183 commit 2146cf56821c3364786ca94a7306008c5824b238
3184 Author: Kumar Gala <galak@kernel.crashing.org>
3185 Date: Wed Dec 19 01:18:15 2007 -0600
3187 Reworked FSL Book-E TLB macros to be more readable
3189 The old macros made it difficult to know what WIMGE and perm bits
3190 were set for a TLB entry. Actually use the bit masks for these items
3191 since they are only a single bit.
3193 Also moved the macros into mmu.h out of e500.h since they aren't specific
3196 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3198 commit 1d47273d46925929f8f2c1913cd96d7257aade88
3199 Author: Kumar Gala <galak@kernel.crashing.org>
3200 Date: Tue Dec 18 23:21:51 2007 -0600
3202 Use FSL Book-E MMU macros from Linux Kernel
3204 Grab the FSL Book-E MAS register macros from Linux. Also added
3205 defines for page sizes up to 4TB and removed SHAREN since it doesnt
3208 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3210 commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
3211 Author: Andy Fleming <afleming@freescale.com>
3212 Date: Wed Jan 9 13:51:32 2008 -0600
3214 Fix my own merge stupidity
3216 Way back in August I merged Heiko's patch:
3217 566a494f592: [PCS440EP] upgrade the PCS440EP board
3219 with Jon's CONFIG_COMMANDS patches.
3221 This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
3223 However, in the process, I left out some of Heiko's good changes.
3225 Now Heiko's and Jon's patches are properly merged in fat_register_device()
3227 Signed-off-by: Andy Fleming <afleming@freescale.com>
3229 commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
3230 Author: James Yang <James.Yang@freescale.com>
3231 Date: Wed Jan 9 11:17:49 2008 -0600
3233 Expose parse_line() globally.
3235 Add new function readline_into_buffer() that allows the
3236 output of readline to be put into a pointer to char buffer.
3238 This refactoring allows other functions besides the
3239 main command loop to also use the same input mechanism.
3241 Signed-off-by: James Yang <James.Yang@freescale.com>
3242 Acked-by: Jon Loeliger <jdl@freescale.com>
3244 commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
3245 Author: Guennadi Liakhovetski <lg@denx.de>
3246 Date: Wed Jan 9 01:15:25 2008 +0100
3248 trivial: fix consequences of a bad merge
3250 Fix what looks like a merge artifact.
3252 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3254 commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
3255 Author: Zhang Wei <wei.zhang@freescale.com>
3256 Date: Thu Jan 3 10:51:15 2008 +0800
3258 Add Ctrl combo key support to usb keyboard driver.
3260 Ctrl combo key support is added, which is very useful to input Ctrl-C
3261 for interrupt current job.
3262 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
3263 key input when tstc() is called.
3265 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3267 commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
3268 Author: Marcel Ziswiler <marcel@ziswiler.com>
3269 Date: Sun Dec 30 03:30:56 2007 +0100
3271 fix various comments
3273 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
3275 commit 7817cb2083d982923752fe0f12b67c0e7c09a027
3276 Author: Marcel Ziswiler <marcel@ziswiler.com>
3277 Date: Sun Dec 30 03:30:46 2007 +0100
3279 fix comments with new drivers organization
3281 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
3283 commit a9b410dc7d2a4721c408b13abfc037988150f145
3284 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
3285 Date: Fri Dec 28 12:50:59 2007 +0900
3287 Remove the obsolete terse version of do_mii()
3289 We now have more useful version of do_mii() and everybody use it.
3290 Gerald Van Baren says:
3292 > When I originally wrote the mii command 6(!) years ago, I wrote a
3293 > verbose version that printed human readable decomposition of the flags,
3294 > etc., and a terse one that didn't print as much stuff and thus had a
3295 > smaller memory footprint.
3297 > It sounds like the terse version has withered and died, apparently
3298 > people are only using the verbose version (which is very understandable,
3301 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
3302 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
3304 commit 01c687aa6e065bd4faf80f723361e798941dd6b0
3305 Author: Mike Frysinger <vapier@gentoo.org>
3306 Date: Thu Dec 27 13:42:56 2007 -0500
3308 Do not reference sha1.c when building mkimage.
3310 remove sha1.o from mkimage linking since it isn't actually used.
3312 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
3314 commit b9173af73e524d37c812f210173cf83385c5171a
3315 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
3316 Date: Thu Dec 27 15:39:54 2007 +0900
3318 common/cmd_mii.c: Add sanity argc check
3320 If type mii command without arguments, we suffer from uninitialized argv[]
3321 entries; for example we MIPS get stuck by TLB error.
3323 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
3325 commit 500856eb1707ed17d9204baa61dd59948d3b2899
3326 Author: Rafal Jaworowski <raj@semihalf.com>
3327 Date: Wed Jan 9 19:39:36 2008 +0100
3329 API for external applications.
3331 This is an API for external (standalone) applications running on top of
3332 U-Boot, and is meant to be more extensible and robust than the existing
3333 jumptable mechanism. It is similar to UNIX syscall approach. See api/README
3336 Included is the demo application using this new framework (api_examples).
3338 Please note this is still an experimental feature, and is turned off by
3341 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
3343 commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1
3344 Author: Jon Loeliger <jdl@freescale.com>
3345 Date: Wed Jan 9 12:14:55 2008 -0600
3347 86xx: Remove cache config from configs.h
3349 Just use the standard defines in asm/cache.h.
3351 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3353 commit 26a41790f8eba19ad450e18ae91351daf485b3e2
3354 Author: Rafal Jaworowski <raj@semihalf.com>
3355 Date: Wed Jan 9 18:05:27 2008 +0100
3357 Globalize envmatch()
3359 The newly introduced API (routines related to env vars) will need to call
3362 Signed-off-by: Rafal Zabdyr <armo@semihalf.com>
3364 commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f
3365 Author: Jon Loeliger <jdl@freescale.com>
3366 Date: Fri Jan 4 12:07:27 2008 -0600
3368 Convert MPC8610HPCD to use libfdt.
3370 Assumes the presence of the aliases node in the DTS to
3371 locate the pci and serial nodes for fixups.
3373 Use consistent fdtaddr and fdtfile in environment variables.
3375 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3377 commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60
3378 Author: Jon Loeliger <jdl@freescale.com>
3379 Date: Fri Jan 4 11:58:23 2008 -0600
3381 8610: Fix lingering compile warnings.
3385 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3387 commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
3388 Author: Wolfgang Denk <wd@denx.de>
3389 Date: Wed Jan 9 15:14:46 2008 +0100
3391 Coding Style cleanup, update CHANGELOG
3393 Signed-off-by: Wolfgang Denk <wd@denx.de>
3395 commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
3396 Author: Mike Frysinger <vapier@gentoo.org>
3397 Date: Tue Dec 18 04:29:55 2007 -0500
3399 fix easylogo on big endian dev systems
3401 didnt realize how out of shape easylogo actually was until i tried using it.
3402 this patch does byte swapping as need be on the input tga header since the tga
3403 is in little endian but the host could just as well be big endian. i didnt
3404 bother using bswap macros or such stuff from system headers as nothing in
3405 POSIX dictates byte swapping functionality.
3407 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
3409 commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
3410 Author: Mike Frysinger <vapier@gentoo.org>
3411 Date: Tue Dec 18 03:23:25 2007 -0500
3415 - make the Makefile not suck
3416 - include proper headers for prototypes
3417 - fix obvious broken handling of strchr() when handling '.' in filenames
3419 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
3421 commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
3422 Author: raptorbrino@aim.com <raptorbrino@aim.com>
3423 Date: Thu Dec 13 21:23:28 2007 -0500
3425 Fix build problems under Cygwin
3427 This patch allows u-boot to build without error in a cygwin
3428 environment. Cygwin does not define __u64 in it's
3429 include/asm/types.h file. The -idirafter flag in the u-boot
3430 build causes the inclusion of the cygwin types.h file as opposed
3431 to u-bot/include/asm/types.h file which does define __u64.
3432 Subsequently, sha1.c compile fails due to unknown symbol.
3434 Signed-off-by: Brian Miller <raptorbrino@netscape.net>
3436 commit 43ef1c381f9195504a2488f5cb909227eb97d475
3437 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
3438 Date: Fri Nov 30 17:29:59 2007 +0100
3440 cmd_bmp: Add support for displaying gzip compressed bmps
3442 The existing code can show information about a gzip compressed BMP
3443 image, but can't actually display it.
3445 Therefore, move the decompression code out of bmp_info() and use it in
3446 bmp_display() as well in order to display a compressed BMP image.
3448 Also, clean things up a bit and fix a memory leak while we're at it.
3450 [hskinnemoen@atmel.com: a bit of refactoring]
3451 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
3453 commit d197ffd8172c6fdef38733424640a9a47295d6e9
3454 Author: Guennadi Liakhovetski <lg@denx.de>
3455 Date: Thu Nov 29 21:15:56 2007 +0100
3457 Fix and optimize MII operations on FEC (MPC8xx) controllers
3459 This patch fixes several issues at least on a MPC885 based system with two
3460 FEC interfaces used in MII mode.
3462 1. PHY discovery should first read PHY_PHYIDR2 register and only then
3463 PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
3464 otherwise the values read are wrong. Also notice, that PHY discovery
3465 cannot work on MPC88x / MPC87x in setups with both FECs active at all
3466 in its present form, because for both interfaces the registers from FEC
3467 1 are used to communicate over MII.
3469 2. Remove code duplication for resetting the FEC by isolating it into a
3472 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
3474 4. Optimize mii_init() to only reset the FEC 1 controller once.
3476 5. Fix a typo in mii_init() using index i instead of j thus potentially
3477 leading to unpredictable results.
3479 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3481 commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
3482 Author: Guennadi Liakhovetski <lg@denx.de>
3483 Date: Tue Nov 20 13:14:20 2007 +0100
3485 Fix endianness conversions in rtl8169 driver
3487 It is unclear on what platforms this driver has been tested, since
3488 noone up to now defines CONFIG_RTL8169 in the board configuration
3489 header. Now it has been fixed for a big-endian mpc8241 based
3490 linkstation platform. This patch presents the necessary endianness
3493 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3495 commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
3496 Author: Zhang Wei <wei.zhang@freescale.com>
3497 Date: Thu Jan 3 10:51:15 2008 +0800
3499 Add Ctrl combo key support to usb keyboard driver.
3501 Ctrl combo key support is added, which is very useful to input Ctrl-C
3502 for interrupt current job.
3503 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
3504 key input when tstc() is called.
3506 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3507 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
3509 commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
3510 Author: Wolfgang Denk <wd@denx.de>
3511 Date: Wed Jan 9 13:43:38 2008 +0100
3513 Coding Style clenaup; update CHANGELOG
3515 Signed-off-by: Wolfgang Denk <wd@denx.de>
3517 commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
3518 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3519 Date: Thu Dec 27 17:13:11 2007 +0100
3521 Remove bit swapping in Xilinx Spartan bitfile loading
3523 This patch removes the unnecessary bit swapping when
3524 booting .bit files with the 'fpga loadb' command.
3526 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3528 commit 437fc7327f0611f82937858f2d80e4cd61b40984
3529 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3530 Date: Thu Dec 27 17:13:05 2007 +0100
3532 Fix MSB check in Xilinx Spartan slave serial mode
3534 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3536 commit 3bff4ffa33729a42645e328a21e8d16488872958
3537 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3538 Date: Thu Dec 27 17:12:56 2007 +0100
3540 Add new Xilinx Spartan FPGA types
3542 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3544 commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
3545 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3546 Date: Thu Dec 27 17:12:43 2007 +0100
3548 Add pre and post configuration callbacks for Spartan FPGAs
3550 This patch adds a post configuration callback for Spartan2/3 FPGAs.
3551 pre and post configuration callback are now optional and
3552 not called when the function pointer is set to NULL.
3554 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3556 commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
3557 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3558 Date: Thu Dec 27 17:12:34 2007 +0100
3560 Improve configuration of FPGA subsystem
3562 This patch removes the FPGA subsystem configuration through
3563 the CONFIG_FPGA bitmask configuration option.
3565 See README for the new options:
3568 CONFIG_FPGA_<vendor>,
3569 CONFIG_FPGA_<family>
3571 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3573 commit 95c6bc7d4a3588b452baca610f8c795a83630477
3574 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3575 Date: Thu Dec 27 16:55:17 2007 +0100
3577 Add Epson RX8025 RTC support
3579 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3581 commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
3582 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3583 Date: Thu Dec 27 16:57:23 2007 +0100
3585 serial: Make default_serial_console() a weak function
3587 With this patch it is possible to reimplement default_serial_console()
3588 in board specific code. This will be done in the upcomming PMC440
3589 U-Boot port. This also allows the lwmon board maintainer to
3590 remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
3592 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3594 commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
3595 Author: Harald Welte <laforge@openmoko.org>
3596 Date: Wed Dec 19 14:14:47 2007 +0100
3598 add 'terminal program' functionality
3600 This patch adds a 'cu' like serial terminal command to u-boot
3601 using which you can access other serial ports from the system console.
3603 OpenMoko uses this in their Neo1973 phones to get access to the GSM
3604 Modem and GPS chip from the bootloader.
3606 Signed-off-by: Harald Welte <laforge@openmoko.org>
3608 commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
3609 Author: Harald Welte <laforge@openmoko.org>
3610 Date: Wed Dec 19 14:12:53 2007 +0100
3612 Re-introduce the 'nand read.oob' and 'nand write.oob' commands
3613 that used to exist with the legacy NAND code
3615 Signed-off-by: Harald Welte <laforge@openmoko.org>
3617 commit f540c42d9564854b19ce9bbb70affe172529fe70
3618 Author: Harald Welte <laforge@openmoko.org>
3619 Date: Wed Dec 19 14:09:58 2007 +0100
3621 Fix building with CRAMFS but not JFFS2 support
3623 Signed-off-by: Harald Welte <laforge@openmoko.org>
3625 commit 23d0baf967fecdaf1804f045f6339337c5607eec
3626 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3627 Date: Sat Dec 22 15:52:58 2007 +0100
3629 Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
3631 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3632 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3634 commit 23776ff292966a85d811126933830bed48211826
3635 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3636 Date: Tue Dec 11 10:53:12 2007 +0100
3638 ARM: support board-specific ethernet PHY init
3640 Add until the new phylib will be arrived
3642 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3644 commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
3645 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3646 Date: Sat Dec 8 16:34:08 2007 +0100
3648 IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
3650 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3652 commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
3653 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3654 Date: Sun Dec 9 11:01:10 2007 +0100
3656 Add missing file in gitignore and comments
3658 based on Linux source tree's .gitignore files
3660 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3662 commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
3663 Author: Wolfgang Denk <wd@denx.de>
3664 Date: Wed Jan 9 11:36:21 2008 +0100
3666 Coding Style cleanup, update CHANGELOG
3668 Signed-off-by: Wolfgang Denk <wd@denx.de>
3670 commit b2e2142c500c48a57f18f9dd30e66c13caea0971
3671 Author: Stefan Roese <sr@denx.de>
3672 Date: Wed Jan 9 10:38:58 2008 +0100
3674 POST: Execute SPR test after relocation
3676 On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
3677 self modifying code and this doesn't work with stack in d-cache, since
3678 I can't move the code from d-cache to i-cache. We move the SPR test to
3679 be executed a little later, after relocation. Then stack is located in
3680 SDRAM and this self-modifying code is no problem anymore.
3682 Signed-off-by: Stefan Roese <sr@denx.de>
3684 commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
3685 Author: Stefan Roese <sr@denx.de>
3686 Date: Wed Jan 9 10:28:20 2008 +0100
3688 ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
3690 This patch configures the LWMON5 port to use d-cache as init-ram and
3691 the unused GPT0_COMP6 as POST WORD storage.
3693 Signed-off-by: Stefan Roese <sr@denx.de>
3695 commit 1754f50b710194f886b6f2831803d8960171a14d
3696 Author: Stefan Roese <sr@denx.de>
3697 Date: Wed Jan 9 10:25:46 2008 +0100
3699 ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
3701 The privious 4xx POST implementation only supported storing the POST
3702 WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
3703 we need to store the POST WORD in some other non volatile location.
3704 This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
3707 Signed-off-by: Stefan Roese <sr@denx.de>
3709 commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
3710 Author: Stefan Roese <sr@denx.de>
3711 Date: Wed Jan 9 10:23:16 2008 +0100
3713 ppc4xx: Add 44x cache locking to better support init-ram in d-cache
3715 This patch adds support for locking the init-ram/stack in d-cache,
3716 so that other regions may use d-cache as well
3718 Note, that this current implementation locks exactly 4k of d-cache,
3719 so please make sure that you don't define a bigger init-ram area. Take
3720 a look at the lwmon5 440EPx implementation as a reference.
3722 Signed-off-by: Stefan Roese <sr@denx.de>
3724 commit 0ddb89601a8d29e808db450366752ffdc6267c53
3725 Author: Wolfgang Denk <wd@denx.de>
3726 Date: Wed Jan 9 10:16:33 2008 +0100
3728 Fix memset bug in ext2fs_read_file()
3730 ext2fs_read_file() had the function arguments swapped.
3732 Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
3734 Signed-off-by: Wolfgang Denk <wd@denx.de>
3736 commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
3737 Author: Markus Klotzbücher <mk@denx.de>
3738 Date: Tue Jan 5 08:17:15 1988 +0100
3740 Fix problems with usb storage devices on MPC5200 /TQM5200
3742 The MPC5200 OHCI controller operates in big endian, so
3743 CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
3745 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
3747 commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
3748 Author: Wolfgang Denk <wd@denx.de>
3749 Date: Tue Jan 8 22:58:27 2008 +0100
3751 Fix compile problem with new env code.
3753 Signed-off-by: Wolfgang Denk <wd@denx.de>
3755 commit 64b3727b9779d86127cd576e392a987de5ebb9fd
3756 Author: Markus Klotzbücher <mk@denx.de>
3757 Date: Tue Nov 27 10:23:20 2007 +0100
3759 tools: fix fw_printenv tool to compile again
3761 This patch updates the fw_printenv/fw_setenv userspace tool to include
3762 the correct MTD header in order to compile against current kernel
3763 headers. Backward compatibility is preserved by introducing an option
3764 MTD_VERSION which can be set to "old" for compilation using the old MTD
3765 headers. Along with this a number of warnings are fixed.
3767 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
3769 commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
3770 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3771 Date: Tue Jan 8 15:40:09 2008 +0100
3773 ppc4xx: assign PCI interrupts on seuqoia boards
3775 Some operating systems rely on assigned PCI interrupts.
3777 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3779 commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
3780 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3781 Date: Tue Jan 8 15:50:49 2008 +0100
3783 ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
3785 This patch allows the use of 4xx interrupt vector number defines
3786 in board specific code outside cpu/ppc4xx.
3788 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3790 commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
3791 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3792 Date: Tue Jan 8 15:39:01 2008 +0100
3794 ppc4xx: Fix UIC2 vector number base
3796 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3798 commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
3799 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3800 Date: Tue Jan 8 12:49:58 2008 +0100
3802 ppc4xx: Update PLB/PCI divider for PMC440 board
3804 This patch updates the PLB/PCI divider when running at
3805 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
3807 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3809 commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
3810 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3811 Date: Tue Jan 8 11:13:09 2008 +0100
3813 ppc4xx: Disable error message when no NAND chip is installed on PMC440
3815 Add CFG_NAND_QUIET_TEST option to disable error message when
3816 no NAND chip is installed on PMC440 boards.
3818 Disable a couple of config defines that are only used for NAND_U_BOOT.
3820 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3822 commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
3823 Author: Wolfgang Denk <wd@denx.de>
3824 Date: Tue Jan 8 22:58:27 2008 +0100
3826 Fix compile problem with new env code.
3828 Signed-off-by: Wolfgang Denk <wd@denx.de>
3830 commit 6de66b35426312a21174a9bf0576a094e2904bea
3831 Author: Markus Klotzbücher <mk@denx.de>
3832 Date: Tue Nov 27 10:23:20 2007 +0100
3834 tools: fix fw_printenv tool to compile again
3836 This patch updates the fw_printenv/fw_setenv userspace tool to include
3837 the correct MTD header in order to compile against current kernel
3838 headers. Backward compatibility is preserved by introducing an option
3839 MTD_VERSION which can be set to "old" for compilation using the old MTD
3840 headers. Along with this a number of warnings are fixed.
3842 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
3844 commit ad3006fe7e84667021753b74247b0bafd97ba35f
3845 Author: Gerald Van Baren <vanbaren@cideas.com>
3846 Date: Mon Jan 7 23:47:32 2008 -0500
3848 LIBFDT: use memmove() instead of memcpy()
3850 This is partial patch from the DTC/libfdt
3851 commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
3852 Author: David Gibson <david@gibson.dropbear.id.au>
3853 Date: Wed Nov 21 11:56:14 2007 +1100
3855 The patch also fixes one genuine bug caught by valgrind -
3856 _packblocks() in fdt_rw.c was using memcpy() where it should have been
3859 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
3861 commit aec7135bc300e3340d18f203347ee00c5b5f68c0
3862 Author: David Gibson <david@gibson.dropbear.id.au>
3863 Date: Mon Dec 17 14:42:07 2007 +1100
3865 libfdt: Add more documentation (patch the seventh)
3867 This patch adds more documenting comments to libfdt.h. Specifically,
3868 these document the read/write functions (not including fdt_open_into()
3869 and fdt_pack(), for now).
3871 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3873 commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
3874 Author: David Gibson <david@gibson.dropbear.id.au>
3875 Date: Mon Dec 17 14:41:52 2007 +1100
3877 libfdt: Add more documentation (patch the sixth)
3879 This patch adds some more documenting comments to libfdt.h.
3880 Specifically this documents all the write-in-place functions.
3882 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3884 commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
3885 Author: Gerald Van Baren <vanbaren@cideas.com>
3886 Date: Sat Dec 29 22:45:27 2007 -0500
3888 Fine grained per property /chosen updating.
3890 Implement a suggestion by Scott Wood to make the /chosen handling fine
3891 grained. Don't overwrite pre-existing properties on a per-property basis,
3892 so if /chosen exists but a necessary /chosen/property doesn't, it gets
3893 created. If a /chosen property exists, it is NOT overwritten unless the
3894 "force" flag is true.
3896 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
3898 commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
3899 Author: Gerald Van Baren <vanbaren@cideas.com>
3900 Date: Sat Jan 5 15:33:29 2008 -0500
3902 Improve the FDT help message.
3904 Add a note that "fdt copy" makes the new address active.
3905 Remove most of the extra hints at the end of the fdt help.
3907 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
3909 commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
3910 Author: Gerald Van Baren <vanbaren@cideas.com>
3911 Date: Sat Jan 5 14:52:04 2008 -0500
3913 Support setting FDT properties with optional values.
3915 Fix a bug found and documented by Bartlomiej Sieka where the optional
3916 value on "fdt set <path> <prop> [<val>]" wasn't optional.
3918 => fdt mknode / testnode
3919 => fdt print /testnode
3922 => fdt set /testnode testprop
3923 => fdt print /testnode
3928 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
3930 commit 22fb2246df91bfc840d87f0c5910818bad55577a
3931 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3932 Date: Fri Dec 28 11:56:30 2007 +0100
3934 Add fdt_find_and_setprop() to fdt_support.h
3936 fdt_find_and_setprop() is used by several 4xx boards and it's
3937 missing in the appropriate header. This patch eliminates a
3938 warning when building U-Boot for such boards.
3940 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3941 Acked-by: Stefan Roese <sr@denx.de>
3943 commit 802b769bac17b0560d3535a42c502469ee190cd1
3944 Author: Stefan Roese <sr@denx.de>
3945 Date: Tue Jan 8 18:39:30 2008 +0100
3947 ppc4xx: Return 0 on success in 4xx ethernet driver
3949 Signed-off-by: Stefan Roese <sr@denx.de>
3951 commit 6775c68683a53c7abc778774641aac6f833a2cbf
3952 Author: Kim Phillips <kim.phillips@freescale.com>
3953 Date: Tue Jan 8 09:59:49 2008 -0600
3955 mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
3957 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3959 commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
3960 Author: Kim Phillips <kim.phillips@freescale.com>
3961 Date: Thu Dec 20 16:28:34 2007 -0600
3963 mpc83xx: rm remaining FLAT_TREE code
3965 ..in board pci.c files
3967 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3969 commit b3458d2cd55d01732e30a76d898afd99e871cd67
3970 Author: Kim Phillips <kim.phillips@freescale.com>
3971 Date: Thu Dec 20 15:57:28 2007 -0600
3973 mpc83xx: remove FLAT_TREE code
3975 need to rm it from pci code, too!
3977 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3979 commit 5b8bc606c61456566af6912f818a153b6b06f242
3980 Author: Kim Phillips <kim.phillips@freescale.com>
3981 Date: Thu Dec 20 14:09:22 2007 -0600
3983 mpc83xx: convert to using do_fixup_*()
3985 convert to using simpler mpc85xx style fdt update code; streamline by
3986 eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
3987 the old school FLAT_TREE code from 83xx (since the sbc8349 was just
3988 converted over to using libfdt).
3990 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3992 commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
3993 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
3994 Date: Thu Dec 20 12:58:51 2007 -0500
3996 sbc8349: enable libfdt by default on WRS SBC8349 board.
3998 Make libfdt the default for the WRS SBC8349 board.
3999 Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
4000 done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
4002 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
4004 commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
4005 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
4006 Date: Thu Dec 20 12:58:16 2007 -0500
4008 sbc8349: migrate board to libfdt
4010 This adds libfdt support code for the Wind River sbc8349 board.
4012 Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
4013 the other Freescale 83xx boards.
4015 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
4017 commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
4018 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
4019 Date: Thu Dec 20 12:56:19 2007 -0500
4021 sbc8349: Remove board specific ECC code
4023 ECC code is now shared for all 83xx boards, so remove board specific one.
4024 See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
4026 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
4028 commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
4029 Author: Kim Phillips <kim.phillips@freescale.com>
4030 Date: Thu Dec 20 01:30:48 2007 -0600
4032 mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
4034 continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
4036 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4038 commit ccf21c311e68d48399eff1e72936052885f6e3f7
4039 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
4040 Date: Thu Dec 6 16:43:40 2007 +0100
4042 Add support CONFIG_UEC_ETH3 in MPC83xx
4044 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
4046 commit e6af9932d31171e35db880e7b2f29f903b1b7660
4047 Author: Kumar Gala <galak@kernel.crashing.org>
4048 Date: Mon Nov 26 11:00:54 2007 -0600
4050 Remove CONFIG options related to OF that we dont use
4052 The MPC8360E MDS config defined:
4054 CONFIG_OF_HAS_UBOOT_ENV
4056 Which we don't use or ever needed. This seems like copy-paste feature creep.
4058 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4060 commit f602082b4b7ed4ee16432067cc67a0a24fedc715
4061 Author: Kim Phillips <kim.phillips@freescale.com>
4062 Date: Mon Dec 10 14:16:22 2007 -0600
4064 mpc83xx: supress compiler warning
4066 mpc8360emds.c: In function ‘ft_board_setup’:
4067 mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
4068 mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
4070 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4072 commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
4073 Author: Kim Phillips <kim.phillips@freescale.com>
4074 Date: Tue Nov 27 14:17:29 2007 -0600
4076 mpc83xx: fix remaining fdt_find_node_by_path references
4078 rename to fdt_path_offset
4080 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4082 commit 921d4b19ad1be704df58725485d9292dc0414adf
4083 Author: Kim Phillips <kim.phillips@freescale.com>
4084 Date: Mon Nov 19 12:30:09 2007 -0600
4086 mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
4088 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
4089 This change guarantees that the environment will be located on the
4090 first flash sector after the U-Boot image.
4092 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4094 commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
4095 Author: Kim Phillips <kim.phillips@freescale.com>
4096 Date: Fri Nov 9 14:28:08 2007 -0600
4098 mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
4100 u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
4101 properties in the device tree so the PHY gets configured for internal delay on
4102 RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
4104 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4106 commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
4107 Author: Dave Liu <r63238@freescale.com>
4108 Date: Tue Sep 18 12:41:15 2007 +0800
4110 mpc83xx: update the CREDITS and MAINTAINERS
4112 update the CREDITS and MAINTAINERS.
4114 Signed-off-by: Dave Liu <daveliu@freescale.com>
4116 commit b21add4b42af7b767448251b599b91066a160e0d
4117 Author: Dave Liu <r63238@freescale.com>
4118 Date: Tue Sep 18 12:40:21 2007 +0800
4120 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
4122 Add the MAINTAINER and MAKEALL entries for mpc837xemds
4124 Signed-off-by: Dave Liu <daveliu@freescale.com>
4126 commit f8900ce9094c462355eb792eea264ff16ac8fd16
4127 Author: Dave Liu <r63238@freescale.com>
4128 Date: Tue Sep 18 12:38:53 2007 +0800
4130 mpc83xx: Add the MPC837xEMDS board readme
4132 Add the README.mpc837xemds to /doc
4134 Signed-off-by: Dave Liu <daveliu@freescale.com>
4136 commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
4137 Author: Dave Liu <r63238@freescale.com>
4138 Date: Tue Sep 18 12:37:57 2007 +0800
4140 mpc83xx: Add the support of MPC837xEMDS board
4142 The MPC837xEMDS board support:
4143 * DDR2 400MHz hardcoded and SPD init
4144 * Local bus NOR Flash
4145 * I2C, UART, MII and RTC
4149 Signed-off-by: Dave Liu <daveliu@freescale.com>
4151 commit 555da61702771fe0f76f3de23b4e7590f3704161
4152 Author: Dave Liu <r63238@freescale.com>
4153 Date: Tue Sep 18 12:36:58 2007 +0800
4155 mpc83xx: Add the support of MPC8315E SoC
4157 The MPC8315E SoC including e300c3 core and new IP blocks,
4158 such as TDM, PCI Express and SATA controller.
4160 Signed-off-by: Dave Liu <daveliu@freescale.com>
4162 commit 03051c3d35c9981ceaa059005660e699f3eacf1c
4163 Author: Dave Liu <r63238@freescale.com>
4164 Date: Tue Sep 18 12:36:11 2007 +0800
4166 mpc83xx: Add the support of MPC837x SoC
4168 The MPC837x SoC including e300c4 core and new IP blocks,
4169 such as SDHC, PCI Express and SATA controller.
4171 Signed-off-by: Dave Liu <daveliu@freescale.com>
4173 commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
4174 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
4175 Date: Wed Nov 14 18:54:53 2007 +0300
4177 MPC8360E-MDS: configure and enable second UART
4179 Despite user manual, BCSR9.7 is negated (high) on HRST, so
4180 UART2 is disabled. Fix that and configure QE pins properly.
4182 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
4184 commit b2893e1fcb28fad8c8b317104df8cee0142c7631
4185 Author: Timur Tabi <timur@freescale.com>
4186 Date: Mon Nov 5 09:34:06 2007 -0600
4188 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
4190 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
4191 currently-defined 83xx boards. This change guarantees that the environment
4192 will be located on the first flash sector after the U-Boot image.
4194 Signed-off-by: Timur Tabi <timur@freescale.com>
4195 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4197 commit e05329516a13616b53240cd85b739217c2bf87f1
4198 Author: Larry Johnson <lrj@acm.org>
4199 Date: Fri Jan 4 13:27:02 2008 -0500
4201 ppc4xx: Remove weak binding from common Denali data-eye search code
4203 Now that there are no board-specific versions of
4204 "denali_core_search_data_eye()", the weak binding on the common version
4207 Signed-off-by: Larry Johnson <lrj@acm.org>
4209 commit 5ba576c01602fd328800a427964c36a0a05c5dce
4210 Author: Stefan Roese <sr@denx.de>
4211 Date: Sat Jan 5 09:13:46 2008 +0100
4213 ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
4215 Signed-off-by: Stefan Roese <sr@denx.de>
4217 commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
4218 Author: Stefan Roese <sr@denx.de>
4219 Date: Sat Jan 5 09:12:41 2008 +0100
4221 ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
4223 On Katmai the complete auto-calibration somehow doesn't seem to
4224 produce the best results, meaning optimal values for RQFD/RFFD.
4225 This was discovered by GDA using a high bandwidth scope,
4226 analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
4227 so now on Katmai "only" RFFD is auto-calibrated.
4229 This patch also adds RDCC calibration as mentioned on page 7 of
4230 the AMCC PowerPC440SP/SPe DDR2 application note:
4231 "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
4233 Signed-off-by: Stefan Roese <sr@denx.de>
4235 commit 49db47b8ae6afff2b898be312948ff501357dc80
4236 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4237 Date: Wed Jan 2 16:48:42 2008 +0100
4239 ppc4xx: Remove sdram.h from PMC440 board
4241 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4243 commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
4244 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4245 Date: Wed Jan 2 16:48:34 2008 +0100
4247 ppc4xx: use common denali core defines and data eye search code for PMC440
4249 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4251 commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
4252 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4253 Date: Wed Jan 2 12:05:14 2008 +0100
4255 ppc4xx: More cleanup for esd's LCD code
4257 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4259 commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
4260 Author: Stefan Roese <sr@denx.de>
4261 Date: Fri Jan 4 12:00:01 2008 +0100
4263 ppc4xx: Fix Sequoia NAND booting target
4265 The Sequoia NAND booting target now uses the recently extracted
4266 cpu/ppc4xx/denali_data_eye.c file too.
4268 Signed-off-by: Stefan Roese <sr@denx.de>
4270 commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
4271 Author: Lawrence R. Johnson <lrj@acm.org>
4272 Date: Thu Jan 3 15:02:02 2008 -0500
4274 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
4276 Signed-off-by: Larry Johnson <lrj@acm.org>
4278 commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
4279 Author: Lawrence R. Johnson <lrj@acm.org>
4280 Date: Fri Jan 4 02:11:56 2008 -0500
4282 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
4284 Note: this patch changes the configuration of some GPIO registers:
4286 Register Old Value New Value
4287 --------------- ---------- ----------
4288 DCR GPIO0_TCR 0x0000000F 0x0000F0CF
4289 DCR GPIO0_TSRH 0x55005000 0x00000000
4290 DCR GPIO1_TCR 0xC2000000 0xE2000000
4291 DCR GPIO1_TSRL 0x0C000000 0x00200000
4292 DCR GPIO1_ISR2L 0x00050000 0x00110000
4294 Signed-off-by: Larry Johnson <lrj@acm.org>
4296 commit 5ab884b254ca2e707ab50545cd705f30108cf491
4297 Author: Lawrence R. Johnson <lrj@acm.org>
4298 Date: Thu Jan 3 18:54:00 2008 -0500
4300 ppc4xx: Add functionality to GPIO support
4302 This patch makes two additions to GPIO support:
4304 First, it adds function gpio_read_in_bit() to read the a bit from the
4305 GPIO Input Register (GPIOx_IR) in the same way that function
4306 gpio_read_out_bit() reads a bit from the GPIO Output Register
4309 Second, it modifies function gpio_set_chip_configuration() to provide
4310 an additional option for configuring the GPIO from the
4311 "CFG_4xx_GPIO_TABLE".
4313 According to the 440EPx User's Manual, when an alternate output is used,
4314 the three-state control is configured in one of two ways, depending on
4315 the particular output. The first option is to select the corresponding
4316 alternate three-state control in the GPIOx_TRSH/L registers. The second
4317 option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
4318 the GPIOx_TRSH/L registers, and set the corresponding bit in the
4319 GPIOx_TCR register to enable the output. For example, the Manual
4320 specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
4321 the alternate three-state control (first option), and specifies
4322 configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
4323 enabled in the GPIOx_TCR register (second option).
4325 Currently, gpio_set_chip_configuration() configures all alternate signal
4326 outputs to use the first option. This patch allow the second option to
4327 be selected by setting the "out_val" element in the table entry to
4328 "GPIO_OUT_1". The first option is used when the "out_val" element is
4329 set to "GPIO_OUT_0". Because "out_val" is not currently used when an
4330 alternate signal is selected, and because all current GPIO tables set
4331 "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
4332 not change any existing configurations.
4334 Signed-off-by: Larry Johnson <lrj@acm.org>
4336 commit 196404cdc1de495d6182e84731c200fc5748df15
4337 Author: Larry Johnson <lrj@arlinx.com>
4338 Date: Sun Dec 30 01:01:54 2007 -0500
4340 PPC4xx: Remove sdram.h from board/lwmon5
4342 These definitions are now in "include/ppc440.h".
4344 Signed-off-by: Larry Johnson <lrj@acm.org>
4346 commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
4347 Author: Larry Johnson <lrj@arlinx.com>
4348 Date: Sun Dec 30 01:01:32 2007 -0500
4350 PPC4xx: Use common code for LWMON5 board SDRAM support
4352 This patch also modifies the functionality of the code so that the data-eye
4353 search is now done with with the cache disabled.
4355 Signed-off-by: Larry Johnson <lrj@acm.org>
4357 commit 62cc3951ab72135d9c101f1845b794e63a0fa189
4358 Author: Larry Johnson <lrj@arlinx.com>
4359 Date: Sun Dec 30 01:01:14 2007 -0500
4361 PPC4xx: Remove sdram.h from board/amcc/sequoia
4363 These definitions are now in "include/ppc440.h".
4365 Signed-off-by: Larry Johnson <lrj@acm.org>
4367 commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
4368 Author: Larry Johnson <lrj@arlinx.com>
4369 Date: Sun Dec 30 01:00:50 2007 -0500
4371 PPC4xx: Use common code for Sequoia board SDRAM support
4373 Signed-off-by: Larry Johnson <lrj@acm.org>
4375 commit 8b0c5c127690335758100c25eaec2b84db97c101
4376 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4377 Date: Thu Dec 27 16:58:41 2007 +0100
4379 net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
4381 When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
4382 networking stack does not automatically switch to
4383 another interface. This patch does not touch the default
4386 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4387 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4389 commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
4390 Author: Upakul Barkakaty <upakul@gmail.com>
4391 Date: Thu Nov 29 12:16:13 2007 +0530
4393 NET: Proper return code handling in eth_init() function in file eth.c
4395 This patch modifies the return code handling in the eth_init()
4396 function, to be compatible with the handling of the return codes in
4397 the other network stack files. It now returns a 0 on Success and -1 on
4400 Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
4401 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4403 commit 5ca2d0953e4579a80810966cca2077e20d912c97
4404 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4405 Date: Mon Nov 19 20:27:04 2007 +0900
4407 net/eth.c: Fix env_enetaddr signed overflow
4409 Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
4412 U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
4420 Warning: NEC-Candy MAC addresses don't match:
4421 Address in SROM is 00:00:4C:80:92:A2
4422 Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
4424 This patch changes env_enetaddr type from `char' to `unsigned char'.
4426 Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
4427 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4428 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4430 commit f85b60710571b37293d2233933b76e2aa3db5635
4431 Author: Rafal Jaworowski <raj@semihalf.com>
4432 Date: Thu Dec 27 18:19:02 2007 +0100
4434 Introduce new eth_receive routine
4436 The purpose of this routine is receiving a single network frame, outside of
4437 U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
4438 U-Boot will let them utilise networking facilities. For sending a raw frame
4439 the already existing eth_send() can be used.
4441 The direct consumer of this routine is the newly introduced API layer for
4442 external applications (enabled with CONFIG_API).
4444 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
4445 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
4446 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4448 commit 5c740711f0ea5b51414b341b71597c4a0751be74
4449 Author: Jon Loeliger <jdl@freescale.com>
4450 Date: Thu Jan 3 10:41:04 2008 -0600
4452 8610: Move include of config.h earlier.
4454 Include config.h earlier in the set of #includes
4455 so as to avoid a incidental and duplicate definition
4456 of CFG_CACHELINE_SIZE.
4458 Signed-off-by: Jon Loeliger
4460 commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
4461 Author: Jon Loeliger <jdl@freescale.com>
4462 Date: Tue Dec 4 10:53:34 2007 -0600
4464 Don't slam #undef DEBUG in the 8641HPCN config file.
4466 Doing so prevents it from being individually set
4467 and useful in other files.
4469 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4471 commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
4472 Author: Jon Loeliger <jdl@freescale.com>
4473 Date: Wed Nov 28 14:47:18 2007 -0600
4475 Convert MPC8641HPCN to use libfdt.
4477 Assumes the presence of the aliases node in the DTS to
4478 locate the ethernet, pci and serial nodes for fixups.
4480 Use consistent fdtaddr and fdtfile in environment variables.
4482 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4484 commit ce37422d0002e10490e268392e0c4e3028e52cec
4485 Author: Stefan Roese <sr@denx.de>
4486 Date: Wed Jan 2 14:06:26 2008 +0100
4488 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
4490 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
4491 flash chips connected to a 32bit wide port.
4493 Signed-off-by: Stefan Roese <sr@denx.de>
4495 commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
4496 Author: Wolfgang Denk <wd@denx.de>
4497 Date: Wed Jan 2 15:58:44 2008 +0100
4499 Fix compile problem introduced by "cleanup" commit 3dfd708c
4501 Signed-off-by: Wolfgang Denk <wd@denx.de>
4503 commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
4504 Author: Wolfgang Denk <wd@denx.de>
4505 Date: Wed Jan 2 15:54:45 2008 +0100
4507 Make scripts and Makefiles POSIX compliant
4509 The bash builtin versions of the "test" (resp. "[") command allow
4510 using "==" for string comparisons, but POSIX compatible implemen-
4511 tations (like /usr/bin/test) insist on using "=" only. On such systems
4514 $ /usr/bin/test a == a && echo OK
4515 /usr/bin/test: ==: binary operator expected
4517 This patch fixes Makefiles and scripts to use POSIX style.
4519 Signed-off-by: Wolfgang Denk <wd@denx.de>
4521 commit 47cc23cbe9a669c510183f4f049bf703ef445f3b
4522 Author: Stefan Roese <sr@denx.de>
4523 Date: Wed Jan 2 14:05:37 2008 +0100
4525 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
4527 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
4528 flash chips connected to a 32bit wide port.
4530 Signed-off-by: Stefan Roese <sr@denx.de>
4532 commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
4533 Author: Wolfgang Denk <wd@denx.de>
4534 Date: Wed Jan 2 12:38:43 2008 +0100
4536 Minor coding style cleanup.
4538 Signed-off-by: Wolfgang Denk <wd@denx.de>
4540 commit e174ac34adf5d5653df12bc3cf19c52063a71269
4541 Author: Stefan Roese <sr@denx.de>
4542 Date: Fri Dec 28 17:29:56 2007 +0100
4544 ppc4xx: Coding style cleanup
4546 Signed-off-by: Stefan Roese <sr@denx.de>
4548 commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
4549 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4550 Date: Fri Dec 28 17:07:24 2007 +0100
4552 ppc4xx: Complete PMC440 board support
4554 This patch brings the PMC440 board configuration file.
4555 Finally it enables the PMC440 board support.
4557 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4559 commit 407843a582560fc5231299561ab3c2b6b6cd3397
4560 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4561 Date: Fri Dec 28 17:07:18 2007 +0100
4563 ppc4xx: Add FPGA support and BSP commands for PMC440 boards
4565 This patch adds some BSP commands and FPGA booting support
4566 for esd's PMC440 boards.
4568 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4570 commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
4571 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4572 Date: Fri Dec 28 17:07:14 2007 +0100
4574 ppc4xx: Add initial esd PMC440 board files
4576 This patch adds the first files for the new esd PMC440 boards.
4577 The next two patches will complete the PMC440 board support.
4579 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4581 commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
4582 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4583 Date: Fri Dec 28 17:10:36 2007 +0100
4585 ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
4587 - add EEPROM write protection for esd PLU405 boards.
4588 - initialize NAND GPIOs
4589 - use correct io accessors
4592 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4594 commit 77660c4b59055d621d2a8595bd4c18bb277268fc
4595 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4596 Date: Fri Dec 28 17:10:44 2007 +0100
4598 ppc4xx: use correct io accessors for esd's LCD code
4600 This patch fixes esd's LCD dectection code to work correctly with
4603 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4605 commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
4606 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4607 Date: Fri Dec 28 17:10:42 2007 +0100
4609 ppc4xx: Maintenance patch for VOH405 boards
4611 - add EEPROM write protection
4612 - initialize NAND GPIOs
4613 - use correct io accessors
4614 - slow down I2C clock to 100kHz
4615 - enable ext. I2C bus
4618 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4620 commit c05569066dbcba3fdf36d4d1943df265dc316a86
4621 Author: Stefan Roese <sr@denx.de>
4622 Date: Fri Dec 28 16:08:08 2007 +0100
4624 ppc4xx: Enable 405EP PCI arbiter per default on all boards
4626 In an attmemt to clean up the 4xx start.S file, I removed the enabling
4627 of the internal 405EP PCI arbiter. This is needed for multiple other
4628 405EP platforms, like most of the esd 405EP. Now the internal PCI
4629 arbiter is enabled again per default as it has been before.
4631 Signed-off-by: Stefan Roese <sr@denx.de>
4632 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4634 commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
4635 Author: Stefan Roese <sr@denx.de>
4636 Date: Fri Dec 28 15:53:46 2007 +0100
4638 ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
4640 Signed-off-by: Stefan Roese <sr@denx.de>
4641 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4643 commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
4644 Author: Stefan Roese <sr@denx.de>
4645 Date: Fri Dec 28 06:06:04 2007 +0100
4647 ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
4649 Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
4650 platforms mentioned above.
4652 Signed-off-by: Stefan Roese <sr@denx.de>
4654 commit b568fd25574181a3b12ae3d66b2913903442cb83
4655 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4656 Date: Thu Dec 27 17:03:46 2007 +0100
4658 Remove CPCI440 board
4660 This board never left prototyping state and it
4661 became a millstone round my neck. So remove it.
4663 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4665 commit c591dffe0cbacd896ccbad06011fe6d6afa080da
4666 Author: Larry Johnson <lrj@arlinx.com>
4667 Date: Thu Dec 27 11:28:51 2007 -0500
4669 Add support for Korat PPC440EPx board
4671 These patches add support for the PPC440EPx-based "Korat" board to
4672 U-Boot. They are based primarily on support for the Sequoia board.
4674 Signed-off-by: Larry Johnson <lrj@acm.org>
4676 commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
4677 Author: Larry Johnson <lrj@arlinx.com>
4678 Date: Sat Dec 22 15:16:25 2007 -0500
4680 Add configuration file for Korat board
4682 This patch supplies the configuration file for the Korat PPC440EPx-
4685 Signed-off-by: Larry Johnson <lrj@acm.org>
4687 commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
4688 Author: Larry Johnson <lrj@arlinx.com>
4689 Date: Sat Dec 22 15:16:11 2007 -0500
4691 Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
4693 Signed-off-by: Larry Johnson <lrj@acm.org>
4695 commit aba19604d848b2838cfb9ebe818909e6a216058e
4696 Author: Larry Johnson <lrj@arlinx.com>
4697 Date: Thu Dec 27 10:54:48 2007 -0500
4699 Add 440EPx DDR2 SPD DIMM support
4701 This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
4702 controller. It should also work on the 440GRx. It is based on the DDR2
4703 SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
4705 This code has been tested on prototype Korat boards with three Kingston
4706 DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
4707 (two ranks). The Korat board has a single DIMM socket, but support has
4708 been provided (though not tested) for boards with two DIMM sockets.
4710 Signed-off-by: Larry Johnson <lrj@acm.org>
4712 commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
4713 Author: Larry Johnson <lrj@arlinx.com>
4714 Date: Sat Dec 22 15:15:30 2007 -0500
4716 Copy 440EPx/GRx SDRAM data-eye search to common directory
4718 This patch creates a non-board-specific file for performing the SDRAM
4719 data-eye search. It also adds ECC error checking to the test of valid
4720 data on readback when ECC is enabled.
4722 Signed-off-by: Larry Johnson <lrj@acm.org>
4724 commit c46f53333b22b1f9098676bea8884fc7db820cf3
4725 Author: Larry Johnson <lrj@arlinx.com>
4726 Date: Sat Dec 22 15:15:13 2007 -0500
4728 Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
4730 This patch adds the Denali SDRAM controller definitions to "ppc440.h".
4731 It also fixes two typos in the definitions, so the board-specific
4732 "sdram.h" files containing these definitions are also fixed to avoid
4735 Signed-off-by: Larry Johnson <lrj@acm.org>
4737 commit c348578bf612d0c56d8d376d23cae16defbd86af
4738 Author: Larry Johnson <lrj@arlinx.com>
4739 Date: Thu Dec 27 10:50:55 2007 -0500
4741 Add Ethernet 1000BASE-X support for PPC4xx
4743 This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
4744 is defined, the PHY will advertise it's capabilities for autonegotiation
4745 based on the capabilities shown in the PHY's status registers, including
4746 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
4747 advertise hard-coded capabilities, as before.
4749 Signed-off-by: Larry Johnson <lrj@acm.org>
4751 commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
4752 Author: Larry Johnson <lrj@arlinx.com>
4753 Date: Thu Dec 27 09:52:17 2007 -0500
4755 Add driver for National Semiconductor LM73 temperature sensor
4757 This driver is based on the driver for the LM75.
4759 Signed-off-by: Larry Johnson <lrj@acm.org>
4761 commit 12618278688ea9b3d76536960a5ad2e3790fac40
4762 Author: Larry Johnson <lrj@arlinx.com>
4763 Date: Sat Dec 22 15:14:00 2007 -0500
4765 Add driver for STMicroelectronics M41T60 RTC
4767 This driver is based on the driver for the M41T11. In the intended
4768 application, the RTC will be powered by a large capacitor, rather than a
4769 battery. The driver therefore checks to see whether the RTC has lost
4770 power. The chip's OUT bit is normally reset from its power-up state. If
4771 the OUT bit is read as set, or if the date and time are not valid, then the
4772 RTC is assumed to have lost power, and its date and time are reset to
4773 1900-01-01 00:00:00.
4775 Support for adjusting the speed of the clock to improve accuracy is
4776 provided through an environment variable.
4778 Signed-off-by: Larry Johnson <lrj@acm.org>
4780 commit d3471173e14b7544bb60339eda8d3d3906694b0a
4781 Author: Larry Johnson <lrj@arlinx.com>
4782 Date: Sat Dec 22 15:34:39 2007 -0500
4784 Use out_be32() and friends to access memory-mapped registers in sequoia.c
4786 Signed-off-by: Larry Johnson <lrj@acm.org>
4788 commit c68f59fe3ec16769f82b5fca7421983c336d3aac
4789 Author: Larry Johnson <lrj@arlinx.com>
4790 Date: Sat Dec 22 15:34:20 2007 -0500
4792 Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
4794 Signed-off-by: Larry Johnson <lrj@acm.org>
4796 commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
4797 Author: Larry Johnson <lrj@arlinx.com>
4798 Date: Sat Dec 22 15:23:50 2007 -0500
4800 Cosmetic changes to ECC POST for AMCC Denali core
4802 Signed-off-by: Larry Johnson <lrj@acm.org>
4804 commit 2e583d6c81034f80a267b89fa55498ae063ccef1
4805 Author: Stefan Roese <sr@denx.de>
4806 Date: Wed Dec 26 20:20:19 2007 +0100
4808 ppc4xx: Fix compilation problem in 405 cache POST test
4810 Signed-off-by: Stefan Roese <sr@denx.de>
4812 commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
4813 Author: Stefan Roese <sr@denx.de>
4814 Date: Sat Dec 22 12:20:09 2007 +0100
4816 ppc4xx: Move virtual address of POST cache test to bigger address
4818 On Sequoia & LWMON5 the virtual address of the POST cache test is now
4819 moved to a bigger address. This enables usage of more memory on those
4822 Signed-off-by: Stefan Roese <sr@denx.de>
4824 commit d91722102cf63f77a0148ed3f3d54a26d87575e9
4825 Author: Stefan Roese <sr@denx.de>
4826 Date: Sat Dec 22 12:18:26 2007 +0100
4828 ppc4xx: Fix problem in 44x cache POST routine
4830 As repoted by Larry Johnson, running "diag run cache" caused a crash
4831 in U-Boot. This problem was introduced by a patch that removed the
4832 TLB entry for the cache test after the test has completed. Since this
4833 TLB was only setup once, a 2nd attempt to run this cache test
4834 failed with a crash. Now this TLB entry is created every time the
4837 Signed-off-by: Stefan Roese <sr@denx.de>
4839 commit b0265b576bb8fa9465f99e99c323768b562fadc2
4840 Author: Stefan Roese <sr@denx.de>
4841 Date: Fri Dec 21 07:51:29 2007 +0100
4843 ppc4xx: Update Makalu fdt support
4845 Signed-off-by: Stefan Roese <sr@denx.de>
4847 commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
4848 Author: Stefan Roese <sr@denx.de>
4849 Date: Wed Dec 19 09:05:40 2007 +0100
4851 ppc4xx: Add fdt support to AMCC Katmai eval board
4853 Signed-off-by: Stefan Roese <sr@denx.de>
4855 commit 328a340392a5df9aaf00792be989df73e750859e
4856 Author: Stefan Roese <sr@denx.de>
4857 Date: Tue Dec 18 08:44:51 2007 +0100
4859 ppc4xx: fdt: Cleanup setup of cpu node setup
4861 Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
4862 without using the absolute path to the cpu node. This makes it possible
4863 to use this U-Boot version with both versions of cpu-node naming
4864 "cpu@0" and the former "PowerPC,440EPx@0".
4866 Signed-off-by: Stefan Roese <sr@denx.de>
4868 commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
4869 Author: Stefan Roese <sr@denx.de>
4870 Date: Mon Dec 17 17:26:21 2007 +0100
4872 ppc4xx: Fix lwmon5 compilation problem
4874 Now that the 440EPx ECC test is not board specific anymore
4875 remove this Makefile.
4877 Signed-off-by: Stefan Roese <sr@denx.de>
4879 commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
4880 Author: Anatolij Gustschin <agustschin@t-online.de>
4881 Date: Wed Dec 5 17:43:20 2007 +0100
4883 Fix ppc4xx clear_bss() code
4885 ppc4xx clear_bss() fails if BSS segment size is not
4886 divisible by 4 without remainder. This patch provides
4887 fix for this problem.
4889 Signed-off-by: Anatolij Gustschin <agust@denx.de>
4891 commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
4892 Author: Niklaus Giger <niklausgiger@gmx.ch>
4893 Date: Fri Nov 30 18:35:11 2007 +0100
4895 PPC4xx: Minimal changes to add vxWorks support
4897 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
4899 commit 052440b022ca8981d39b6f8c10d1aa6326f47480
4900 Author: Markus Klotzbücher <mk@denx.de>
4901 Date: Fri Nov 23 13:09:18 2007 +0100
4903 ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
4905 When using dhcp/bootp the "netmask" environment variable is not
4906 set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
4907 desireable, so the following patch adds this this option to the board
4910 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
4911 Signed-off-by: Stefan Roese <sr@denx.de>
4913 commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
4914 Author: Larry Johnson <lrj@arlinx.com>
4915 Date: Sat Oct 27 12:48:15 2007 -0400
4917 Fix/enhance ECC POST for 440EPx/GRx
4919 This patch allows the ECC POST to be used for different boards with the
4920 PPC440 Denali SDRAM controller. Modifications include skipping the test
4921 if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
4922 to prevent timing errors.
4924 Signed-off-by: Larry Johnson <lrj@acm.org>
4926 commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
4927 Author: Larry Johnson <lrj@arlinx.com>
4928 Date: Sat Oct 27 12:48:05 2007 -0400
4930 PPC4xx: Move/rename ECC POST for 440EPx/GRx
4932 Signed-off-by: Larry Johnson <lrj@acm.org>
4934 commit c29d2d3680046d430022c55e50fcb27f5866517e
4935 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4936 Date: Fri Dec 14 11:20:33 2007 +0100
4938 ppc4xx: use correct io accessors for 4xx ethernet POST
4940 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4942 commit ba79fde58a48c0a6ff8e2a96caba951594142203
4943 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4944 Date: Fri Dec 14 11:19:56 2007 +0100
4946 ppc4xx: fix flush + invalidate_dcache_range arguments
4948 flush + invalidate_dcache_range() expect the start and stop+1 address.
4949 So the stop address is the first address behind (!) the range.
4951 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4953 commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
4954 Author: Stefan Roese <sr@denx.de>
4955 Date: Fri Dec 14 08:41:29 2007 +0100
4957 ppc4xx: fdt: use fdt_fixup_ethernet()
4959 By using aliases in the dts file, the ethernet node fixup is
4960 much easier with the recently added functions.
4962 Please note that the dts file needs the aliases for this to work.
4964 Signed-off-by: Stefan Roese <sr@denx.de>
4966 commit 136288847e3b04f2ff357a067ad45e10afa0a24c
4967 Author: Stefan Roese <sr@denx.de>
4968 Date: Thu Dec 13 14:52:53 2007 +0100
4970 ppc4xx: Bring 4xx fdt support up-to-date
4972 This patch update the 4xx fdt support. It enabled fdt booting
4973 on the AMCC Kilauea and Sequoia for now. More can follow later
4976 Signed-off-by: Stefan Roese <sr@denx.de>
4978 commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
4979 Author: Stefan Roese <sr@denx.de>
4980 Date: Thu Dec 27 07:50:54 2007 +0100
4982 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
4984 The check for an sufficiently erased destination was missing in the
4985 buffered write function of the cfi flash driver (when
4986 CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
4987 writing to such a region will fail with the currect error message.
4989 Signed-off-by: Stefan Roese <sr@denx.de>
4991 commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
4992 Author: Martin Krause <martin.krause@tqs.de>
4993 Date: Mon Nov 12 10:56:17 2007 +0100
4995 Some configuration updates for the TQM5200 based TB5200 board:
4997 - enable command line history
4998 - increase malloc space (because of bigger flash sectors)
5000 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5002 commit e318d9e9021a0af7508171f84ed09d0e79f0284e
5003 Author: Martin Krause <martin.krause@tqs.de>
5004 Date: Thu Sep 27 11:10:08 2007 +0200
5006 TQM8xx: use the CFI flash driver on all TQM8xx boards
5008 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5010 commit 11d9eec479b470eab9242ab937fca70a876d9376
5011 Author: Martin Krause <martin.krause@tqs.de>
5012 Date: Wed Sep 26 17:55:56 2007 +0200
5014 TQM885D: adjust for doubled flash sector size + some minor fixes
5016 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5018 commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
5019 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
5020 Date: Wed Sep 26 17:55:54 2007 +0200
5022 TQM885D: Exchanged SDRAM timing by a more relaxed timing.
5024 CAS-Latency=2, Write Recovery Time tWR=2
5025 The max. supported bus frequency is 66 MHz. Therefore, changed
5026 threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
5028 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5030 commit b988b8cd443989be65161888eea0127ad03f846f
5031 Author: Martin Krause <martin.krause@tqs.de>
5032 Date: Wed Sep 26 17:55:56 2007 +0200
5034 TQM885D: use calculated cpuclk instead of measuring it
5036 On the TQM885D the measurement of cpuclk with the PIT reference
5037 timer ist not necessary. Since all module variants use the same
5038 external 10 MHz oscillator, the cpuclk only depends on the PLL
5039 configuration - which is readable by software.
5041 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5043 commit 492c7049869348d31168de8dad89651315e468e0
5044 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
5045 Date: Thu Sep 27 14:54:46 2007 +0200
5047 TQM885D: fix SDRAM refresh
5049 At 133 MHz the current SDRAM refresh rate is too fast
5050 (measured 4 * 1.17 us).
5051 CFG_MAMR_PTA changes from 39 to 128. This result
5052 in a refresh rate of 4 * 7.8 us at the default clock
5053 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
5054 This is a compromise until a new method is found to
5055 adjust the refresh rate.
5057 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5059 commit dabad4b9bc46908e301f73ce76b38b23626a96e9
5060 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
5061 Date: Thu Sep 27 14:54:46 2007 +0200
5063 TQM860M: Support for 10col SDRAMs, max. 128 MiB
5065 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5067 commit 61fb15c516fef5631e305f1976d7b3a679725856
5068 Author: Wolfgang Denk <wd@denx.de>
5069 Date: Thu Dec 27 01:52:50 2007 +0100
5071 Fix coding style issues; update CHANGELOG.
5073 Signed-off-by: Wolfgang Denk <wd@denx.de>
5075 commit 467bcee11fe26ad422f2de971aa70866079870f2
5076 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5077 Date: Fri Dec 14 15:36:18 2007 +0100
5079 cfi_flash: Add manufacturer-specific fixups
5081 Run fixups based on the JEDEC manufacturer ID independent of the
5084 This changes current behaviour: Previously, geometry reversal for AMD
5085 chips were done based on the command set ID, while they are now done
5086 based on the JEDEC manufacturer and device ID.
5088 Also add fixup for top-boot Atmel chips. A fixup is needed for
5089 AT49BV6416(T) too, but since u-boot currently only reads the low byte
5090 of the device ID, there's no way to tell it apart from AT49BV642D,
5091 which should not have this fixup. Since AT49BV642D support is
5092 necessary to get ATNGW100 board support into mainline, I've commented
5093 out the fixup for now.
5095 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5097 commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
5098 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5099 Date: Fri Dec 14 15:36:17 2007 +0100
5101 cfi_flash: Add cmdset-specific init functions
5103 Move things like reading JEDEC IDs and fixing up geometry reversal
5104 into separate functions. The geometry reversal fixup is now performed
5105 by altering the qry structure directly, which makes the sector init
5106 code slightly cleaner.
5108 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5110 commit e23741f4a6d8047520ef0d4971762749b3587d32
5111 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5112 Date: Fri Dec 14 15:36:16 2007 +0100
5114 cfi_flash: Read whole QRY structure in one go
5116 Read out the whole CFI Standard Query structure after successful cfi
5117 identification. This allows subsequent code to access this information
5118 directly without having to go through flash_read_uchar() and friends.
5120 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5122 commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
5123 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5124 Date: Mon Dec 17 11:02:44 2007 +0100
5126 AVR32: Fix logic inversion in disable_interrupts()
5128 disable_interrupts() should return nonzero if interrupts were
5129 _enabled_ before, not disabled.
5131 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5133 commit acac475212cbedb17b321a363a1c878e2b47b37f
5134 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5135 Date: Fri Dec 14 16:51:22 2007 +0100
5137 AVR32: Enable interrupts at bootup
5139 The timer code depends on the timer interrupt to keep track of the
5140 upper 32 bits of the cycle counter. This obviously doesn't work when
5141 interrupts are disabled the whole time.
5143 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5145 commit 9570bcd87f4db255514f43b6701746c412f8fef0
5146 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5147 Date: Thu Nov 15 10:03:45 2007 +0100
5149 AVR32: Fix wrong pin setup for USART3
5151 As reported by Gerhard Berghofer:
5153 in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
5154 instead of PB18 and PB19.
5156 which is obviously correct. There's currently no code that uses
5157 USART3, but custom boards may run into problems.
5159 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5161 commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
5162 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5163 Date: Thu Nov 1 12:44:20 2007 +0100
5165 README: Remove ATSTK1000 daughterboard list
5167 As noted by Kim Phillips, these lists tend to become out of date.
5169 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5171 commit c81cbbad21cb0ae983e2e796211202234cdc8be2
5172 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5173 Date: Tue Oct 30 14:56:36 2007 +0100
5175 Add ATSTK100[234] to MAINTAINERS
5177 Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
5178 "mother". Also update the entry for ATSTK1000 to be not only about the
5179 AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
5181 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5183 commit 64ff2357b1727213803591813dbc779c924bf772
5184 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5185 Date: Mon Oct 29 13:02:54 2007 +0100
5187 AVR32: Add support for the ATSTK1004 board
5189 ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
5190 which is a derivative of AT32AP7000.
5192 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5194 commit 667568db157f374b85abd7e03596ddd1f0b25681
5195 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5196 Date: Mon Oct 29 13:02:54 2007 +0100
5198 AVR32: Add support for the ATSTK1003 board
5200 ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
5201 which is a derivative of AT32AP7000.
5203 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5205 commit 5fee84a794a51ec830548cda485a770efb018b92
5206 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5207 Date: Mon Oct 29 13:23:33 2007 +0100
5209 AVR32: Make some AT32AP700x peripherals optional
5211 Add a chip-features file providing definitions of the form
5213 AT32AP700x_CHIP_HAS_<peripheral>
5215 to indicate the availability of the given peripheral on the currently
5218 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5220 commit 36f28f8a9605ee5dcfa330482cfc62171261af97
5221 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5222 Date: Mon Oct 29 13:09:56 2007 +0100
5224 AVR32: Rename at32ap7000 -> at32ap700x
5226 The SoC-specific code for all the AT32AP700x CPUs is practically
5227 identical; the only difference is that some chips have less features
5228 than others. By doing this rename, we can add support for the AP7000
5229 derivatives simply by making some features conditional.
5231 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5233 commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
5234 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5235 Date: Fri Jun 29 18:22:34 2007 +0200
5237 atmel_mci: Show SR when block read fails
5239 Show controller status as well as card status when an error occurs
5242 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5244 commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
5245 Author: Stefan Roese <sr@denx.de>
5246 Date: Thu Dec 13 14:52:53 2007 +0100
5248 ppc4xx: Bring 4xx fdt support up-to-date
5250 This patch update the 4xx fdt support. It enabled fdt booting
5251 on the AMCC Kilauea and Sequoia for now. More can follow later
5254 Signed-off-by: Stefan Roese <sr@denx.de>
5256 commit 12d30aa79779c2aa7a998bbae4c075f822a53004
5257 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5258 Date: Thu Dec 13 12:56:34 2007 +0100
5260 cfi_flash: Use map_physmem() and unmap_physmem()
5262 Use map_physmem() and unmap_physmem() to convert from physical to
5263 virtual addresses. This gives the arch a chance to provide an uncached
5264 mapping for flash accesses.
5266 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5268 commit 4d7d6936eb29af7cca330937808312aa5f61454d
5269 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5270 Date: Thu Dec 13 12:56:33 2007 +0100
5272 Introduce map_physmem() and unmap_physmem()
5274 map_physmem() returns a virtual address which can be used to access a
5275 given physical address without involving the cache. unmap_physmem()
5276 should be called when the virtual address returned by map_physmem() is
5279 This patch adds a stub implementation which simply returns the
5280 physical address cast to a uchar * for all architectures except AVR32,
5281 which converts the physical address to an uncached virtual mapping.
5282 unmap_physmem() is a no-op on all architectures, but if any
5283 architecture needs to do such mappings through the TLB, this is the
5284 hook where those TLB entries can be invalidated.
5286 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5288 commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
5289 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5290 Date: Thu Dec 13 12:56:32 2007 +0100
5292 cfi_flash: Introduce read and write accessors
5294 Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
5295 them to access the flash memory. This makes it clearer when the flash
5296 is actually being accessed; merely dereferencing a volatile pointer
5297 looks just like any other kind of access.
5299 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5301 commit 812711ce6b3a386125dcf0d6a59588e461abbb87
5302 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5303 Date: Thu Dec 13 12:56:31 2007 +0100
5305 Implement __raw_{read,write}[bwl] on all architectures
5307 This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
5308 m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
5311 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5313 commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
5314 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5315 Date: Sat Oct 6 18:55:36 2007 +0200
5317 cfi_flash: Reorder functions and eliminate extra prototypes
5319 Reorder the functions in cfi_flash.c so that each function only uses
5320 functions that have been defined before it. This allows the static
5321 prototype declarations near the top to be eliminated and might allow
5322 gcc to do a better job inlining functions.
5324 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5326 commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
5327 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5328 Date: Thu Dec 13 12:56:29 2007 +0100
5330 cfi_flash: Make some needlessly global functions static
5332 Make functions not declared in any header file static.
5334 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5336 commit 7e5b9b471518c5652febc68ba62b432193d6abf4
5337 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5338 Date: Thu Dec 13 12:56:28 2007 +0100
5340 cfi_flash: Break long lines
5342 This patch tries to keep all lines in the cfi_flash driver below 80
5343 columns. There are a few lines left which don't fit this requirement
5344 because I couldn't find any trivial way to break them (i.e. it would
5345 take some restructuring, which I intend to do in a later patch.)
5347 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5349 commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
5350 Author: Bartlomiej Sieka <tur@semihalf.com>
5351 Date: Tue Dec 11 13:59:57 2007 +0100
5353 CFI: synchronize command offsets with Linux CFI driver
5355 Fixes non-working CFI Flash on the Inka4x0 board.
5357 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
5359 commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
5360 Author: Kumar Gala <galak@kernel.crashing.org>
5361 Date: Fri Dec 7 12:17:34 2007 -0600
5363 Handle MPC85xx PCIe reset errata (PCI-Ex 38)
5365 On the MPC85xx boards that have PCIe enable the PCIe errata fix.
5366 (MPC8544DS, MPC8548CDS, MPC8568MDS).
5368 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5370 commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
5371 Author: Kumar Gala <galak@kernel.crashing.org>
5372 Date: Fri Dec 7 12:04:30 2007 -0600
5374 Update Freescale MPC85xx ADS/CDS/MDS board config
5376 * Enabled CONFIG_CMD_ELF
5378 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5380 commit d435793229ce29a42797c1edc39f5b34f987f91a
5381 Author: Kumar Gala <galak@kernel.crashing.org>
5382 Date: Fri Dec 7 04:59:26 2007 -0600
5384 Handle Asynchronous DDR clock on 85xx
5386 The MPC8572 introduces the concept of an asynchronous DDR clock with
5387 regards to the platform clock.
5389 Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
5392 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5394 commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
5395 Author: Kumar Gala <galak@kernel.crashing.org>
5396 Date: Thu Nov 29 10:34:28 2007 -0600
5398 Update Freescale MPC85xx ADS/CDS/MDS board config
5400 * Removed some misc environment setup
5401 * Enabled CONFIG_CMDLINE_EDITING
5403 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5405 commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
5406 Author: Kumar Gala <galak@kernel.crashing.org>
5407 Date: Thu Nov 29 10:47:44 2007 -0600
5409 Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
5411 Minor path corrections needed to ensure buildability.
5413 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5415 commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
5416 Author: Kumar Gala <galak@kernel.crashing.org>
5417 Date: Thu Nov 29 10:16:18 2007 -0600
5419 Move the MPC8540 ADS board under board/freescale.
5421 Minor path corrections needed to ensure buildability.
5423 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5425 commit 870ceac5b3a3486c109396e005af81ae762b5710
5426 Author: Kumar Gala <galak@kernel.crashing.org>
5427 Date: Thu Nov 29 10:14:50 2007 -0600
5429 Move the MPC8560 ADS board under board/freescale.
5431 Minor path corrections needed to ensure buildability.
5433 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5435 commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
5436 Author: Kumar Gala <galak@kernel.crashing.org>
5437 Date: Thu Nov 29 10:13:47 2007 -0600
5439 Move the MPC8568 MDS board under board/freescale.
5441 Minor path corrections needed to ensure buildability.
5443 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5445 commit a853d56c59b33415304531443633808736acfc6e
5446 Author: Kumar Gala <galak@kernel.crashing.org>
5447 Date: Thu Nov 29 02:18:59 2007 -0600
5449 Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
5451 We already had defines for LAWAR_TRGT_IF_* that we should use
5452 rather than creating new ones. Also, added some missing defines for
5455 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5457 commit 04db400892da37b76a585e332a0c137954ad2015
5458 Author: Kumar Gala <galak@kernel.crashing.org>
5459 Date: Thu Nov 29 02:10:09 2007 -0600
5461 Stop using immap_t on 85xx
5463 In the future the offsets to various blocks may not be in same location.
5464 Move to using CFG_MPC85xx_*_ADDR as the base of the registers
5465 instead of getting it via &immap.
5467 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5469 commit 2714223f8e04ab3e4133ff65872eef366d90bfea
5470 Author: Kumar Gala <galak@kernel.crashing.org>
5471 Date: Thu Nov 29 01:23:09 2007 -0600
5473 Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
5475 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5477 commit c480861bf000156e6a3e932c258db59ff2212dd3
5478 Author: Kumar Gala <galak@kernel.crashing.org>
5479 Date: Thu Nov 29 01:06:19 2007 -0600
5481 Update MPC8568 MDS to use libfdt
5483 Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
5484 ethernet, pci, and serial for the various fixups that are done.
5486 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5488 commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
5489 Author: Haiying Wang <Haiying.Wang@freescale.com>
5490 Date: Wed Nov 14 15:52:06 2007 -0500
5492 Add PCI Express support on MPC8568MDS
5494 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
5495 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5497 commit b90d25497625b90ffa3f2911a0895ca237556ff5
5498 Author: Kumar Gala <galak@kernel.crashing.org>
5499 Date: Thu Nov 29 00:11:44 2007 -0600
5501 Update MPC85xx CDS to use libfdt
5503 Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
5504 ethernet, pci, and serial for the various fixups that are done.
5506 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5508 commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
5509 Author: Kumar Gala <galak@kernel.crashing.org>
5510 Date: Wed Nov 28 22:54:27 2007 -0600
5512 Update MPC8540 ADS to use libfdt
5514 Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
5515 ethernet, pci, and serial for the various fixups that are done.
5517 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5519 commit 5ce715802f6c50dc78b3405b92f184b1e3710519
5520 Author: Kumar Gala <galak@kernel.crashing.org>
5521 Date: Wed Nov 28 22:40:31 2007 -0600
5523 Update MPC8560 ADS to use libfdt
5525 Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
5526 ethernet, pci, and serial for the various fixups that are done.
5528 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5530 commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
5531 Author: Kumar Gala <galak@kernel.crashing.org>
5532 Date: Wed Nov 28 00:36:33 2007 -0600
5534 Stop using immap_t for cpm offset on 85xx
5536 In the future the offsets to various blocks may not be in same location.
5537 Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
5538 instead of getting it via &immap->im_cpm.
5540 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5542 commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
5543 Author: Kumar Gala <galak@kernel.crashing.org>
5544 Date: Tue Nov 27 23:25:02 2007 -0600
5546 Stop using immap_t for guts offset on 85xx
5548 In the future the offsets to various blocks may not be in same location.
5549 Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
5550 instead of getting it via &immap->im_gur.
5552 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5554 commit 50c03c8cf494d91cdec39670d95337c743e16ec9
5555 Author: Kumar Gala <galak@kernel.crashing.org>
5556 Date: Tue Nov 27 22:42:34 2007 -0600
5558 Update MPC8544 DS config
5560 * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
5561 * Removed some misc environment setup
5562 * Moved to using fdtfile & fdtaddr as fdt env var names
5563 * Enabled CONFIG_CMDLINE_EDITING
5565 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5567 commit addce57e2e4c49e77ffb2020a84690713bb18b47
5568 Author: Kumar Gala <galak@kernel.crashing.org>
5569 Date: Mon Nov 26 17:12:24 2007 -0600
5571 Update MPC8544DS to use libfdt
5573 Updated the MPC8544DS config to use libfdt and assume use of aliases for
5574 ethernet, pci, and serial for the various fixups that are done.
5576 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5578 commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
5579 Author: Kumar Gala <galak@kernel.crashing.org>
5580 Date: Thu Nov 29 00:15:30 2007 -0600
5582 Add libfdt based ft_cpu_setup for mpc85xx
5584 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5586 commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
5587 Author: Stefan Roese <sr@denx.de>
5588 Date: Tue Dec 11 13:38:19 2007 +0100
5590 ppc4xx: Correct GPIO offset in gpio_config()
5592 Thanks to Gary Jennejohn for pointing this out.
5594 Signed-off-by: Stefan Roese <sr@denx.de>
5596 commit 8809a2713b1ceaf3da55d9d785470294f15de06a
5597 Author: Stefan Roese <sr@denx.de>
5598 Date: Tue Dec 11 11:46:01 2007 +0100
5600 rtc: Fix merging problem
5602 Signed-off-by: Stefan Roese <sr@denx.de>
5604 commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
5605 Author: Stefan Roese <sr@denx.de>
5606 Date: Sat Dec 8 14:47:34 2007 +0100
5608 ppc4xx: 405EX: Correctly enable USB pins
5610 This patch selects the USB data pins in the 405EX GPIO and MFC (multi
5611 function control) registers. This is done for the AMCC Kilauea and
5614 Signed-off-by: Stefan Roese <sr@denx.de>
5616 commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
5617 Author: Stefan Roese <sr@denx.de>
5618 Date: Sat Dec 8 08:25:09 2007 +0100
5620 CFI: Coding style cleanup
5622 Signed-off-by: Stefan Roese <sr@denx.de>
5624 commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
5625 Author: Michael Schwingen <michael@schwingen.org>
5626 Date: Fri Dec 7 23:35:02 2007 +0100
5628 CFI: support JEDEC flash roms in CFI-flash framework
5630 The following patch adds support for non-CFI flash ROMS, by hooking into the
5631 CFI flash code and using most of its code, as recently discussed here in the
5632 thread "Mixing CFI and non-CFI flashs".
5634 Signed-off-by: Michael Schwingen <michael@schwingen.org>
5635 Signed-off-by: Stefan Roese <sr@denx.de>
5637 commit c01b17dd856fa120b2970f50d9598546a4927ec3
5638 Author: Gerald Van Baren <vanbaren@cideas.com>
5639 Date: Wed Nov 28 21:24:50 2007 -0500
5641 Conditionally compile fdt_fixup_ethernet()
5643 Fix compiler warnings: On boards that don't have ethernets defined,
5644 don't compile fdt_fixup_ethernet().
5646 commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
5647 Author: Kumar Gala <galak@kernel.crashing.org>
5648 Date: Tue Nov 27 21:59:46 2007 -0600
5650 Convert boards that set memory node to use fdt_fixup_memory()
5652 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5654 commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
5655 Author: Kumar Gala <galak@kernel.crashing.org>
5656 Date: Mon Nov 26 17:06:15 2007 -0600
5658 Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
5660 We use a combination of the serialN alias and CONFIG_CONS_INDEX to
5661 determine which serial alias we should set linux,stdout-path to.
5663 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5665 commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
5666 Author: Kumar Gala <galak@kernel.crashing.org>
5667 Date: Mon Nov 26 14:57:45 2007 -0600
5669 Add common memory fixup function
5671 Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
5673 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5675 commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
5676 Author: Kumar Gala <galak@kernel.crashing.org>
5677 Date: Mon Nov 26 11:19:12 2007 -0600
5679 Conditionally compile fdt_support.c
5681 Modify common/Makefile to conditionally compile fdt_support.c based
5682 on CONFIG_OF_LIBFDT.
5684 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5686 commit d88e7ba0980773479e1a64badb293116071b7ef0
5687 Author: Kumar Gala <galak@kernel.crashing.org>
5688 Date: Mon Nov 26 10:41:40 2007 -0600
5690 Fix build breakage due to libfdt import
5692 The IDS8247 got lost in the update and need an API update
5693 do to rename of functions in libfdt.
5695 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5697 commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
5698 Author: Gerald Van Baren <vanbaren@cideas.com>
5699 Date: Fri Nov 23 19:43:20 2007 -0500
5701 Add spaces around the = in the fdt print format.
5703 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
5705 commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
5706 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5707 Date: Fri Dec 7 01:25:38 2007 +0900
5709 sh: Moved driver of the SuperH dependence
5711 The composition of the directory in the drivers/ changed.
5712 I moved SuperH serial driver and marubun PCMCIA driver.
5714 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5716 commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
5717 Author: Wolfgang Denk <wd@denx.de>
5718 Date: Thu Dec 6 10:21:19 2007 +0100
5722 Signed-off-by: Wolfgang Denk <wd@denx.de>
5724 commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
5725 Author: Wolfgang Denk <wd@denx.de>
5726 Date: Thu Dec 6 10:21:03 2007 +0100
5728 ADS5121 Board: fix compile problem.
5730 Signed-off-by: Wolfgang Denk <wd@denx.de>
5732 commit a27044b14a9e93678a82d7b35f202b93e7687abc
5733 Author: Stefan Roese <sr@denx.de>
5734 Date: Thu Dec 6 05:58:43 2007 +0100
5736 ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
5738 This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
5739 setting the FIXD bit in the SDR0_MFR register. Here a description of the
5743 ------------------------------
5744 If a DMA is performed between memory and PCI with the DMA 1 Controller
5745 using prefetch, and as a result uses a special purpose buffer selected by
5746 the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
5747 the first part of the transfer sequence is performed twice. The
5748 PPC440SPe PCI Controller requests more data than was needed such that in
5749 the case of enforce memory protection, a host CPU exception can occur.
5750 No data is corrupted, because data transfer is stopped in the PCI
5751 Controller. Prefetch enable is specified by setting DMA Configuration
5752 Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
5754 Behavior that may be observed in a running system
5755 ---------------------------------------------------------------------------
5757 1. DMA performance is decreased because of the double access on the PCI bus
5759 2. If an illegal access to some address on the PCI bus is detected at the
5760 system level, a machine check or similar system error may occur.
5762 Workarounds Available
5763 ----------------------------------
5765 1. Do not program prefetch. Note that a prefetch command cannot be programmed
5766 without selecting a special purpose buffer.
5767 2. To avoid crossing a physical boundary of the PCI slave device, add 512
5768 bytes of address to the PCI address range.
5770 This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
5771 from AMCC and slighly changed.
5773 Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
5774 Signed-off-by: Stefan Roese <sr@denx.de>
5776 commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
5777 Author: Stefan Roese <sr@denx.de>
5778 Date: Tue Dec 4 16:29:48 2007 +0100
5780 ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
5782 Signed-off-by: Stefan Roese <sr@denx.de>
5784 commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
5785 Author: Wolfgang Denk <wd@denx.de>
5786 Date: Mon Dec 3 00:15:28 2007 +0100
5788 Prepare for 1.3.1-rc1
5790 Signed-off-by: Wolfgang Denk <wd@denx.de>
5792 commit e15e33433e7c05111968dc9b434a52fd42cbd221
5793 Author: Stefan Roese <sr@denx.de>
5794 Date: Fri Nov 30 07:15:41 2007 +0100
5796 ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
5798 This manual PCIe reset triggering solves the problem seen with the
5799 Intel EPRO/1000 card, which was not detected (link not established)
5800 upon power-up reset.
5802 Signed-off-by: Stefan Roese <sr@denx.de>
5804 commit 260eea5676ca46903a335686cc020b29c4ca46fe
5805 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5806 Date: Thu Nov 29 01:21:54 2007 +0900
5808 sh: Add SuperH boards maintainer to MAINTAINERS file
5810 Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
5812 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5814 commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
5815 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5816 Date: Thu Nov 29 00:13:04 2007 +0900
5818 sh: Add ms7750se support in MAKEALL
5820 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5822 commit c7144373427a178332bf9754131c8c34c52c200a
5823 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5824 Date: Tue Nov 27 09:44:53 2007 +0100
5826 sh: Add sh3 and sh4 support in MAKEALL
5828 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5829 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5831 commit 130080874a3d28450098481a262c5f7c855e908d
5832 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5833 Date: Sun Nov 25 02:51:17 2007 +0900
5835 sh: Add document for SuperH.
5837 This document is a summary of information concerning SuperH of U-Boot.
5839 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5841 commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
5842 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5843 Date: Sun Nov 25 02:39:31 2007 +0900
5845 sh: Add marubun's pcmcia driver
5847 Marubun pcmcia is a chip for PCMCIA used with SuperH.
5848 Of course, this can be used even by other architectures.
5849 When use this driver, came to be able to use CompactFlash
5852 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5854 commit febd86b969b975289ed948f1ac0eb9722da41ced
5855 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5856 Date: Sun Nov 25 02:32:13 2007 +0900
5858 sh: Update SuperH SCIF driver
5860 - Changed volatile unsigned to vu_.
5861 - Changed Makefile for kconfig.
5863 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5865 commit 8be760903645af09871be50ad0a6f9ebb62b311d
5866 Author: Stefan Roese <sr@denx.de>
5867 Date: Tue Nov 27 11:57:35 2007 +0100
5869 ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
5871 After an error in the AMCC 405EX users manual now correctly configure
5872 IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
5875 Signed-off-by: Stefan Roese <sr@denx.de>
5877 commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
5878 Author: Wolfgang Denk <wd@denx.de>
5879 Date: Mon Nov 26 19:18:21 2007 +0100
5881 Cleanup coding style; update CHANGELOG
5883 Signed-off-by: Wolfgang Denk <wd@denx.de>
5885 commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
5886 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5887 Date: Sun Nov 25 22:39:25 2007 +0100
5889 MAKEALL: add missing 512x boards in ppc
5891 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5893 commit a340c325e668ca7386c2276387681720be9c3757
5894 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5895 Date: Sun Nov 25 18:45:47 2007 +0100
5897 Makefile : fix tags ctags etags with new drivers organization
5899 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5901 commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
5902 Author: Stefan Roese <sr@denx.de>
5903 Date: Mon Nov 26 15:06:14 2007 +0100
5905 ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
5907 As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
5910 Signed-off-by: Stefan Roese <sr@denx.de>
5912 commit ca1ce226287270bb01e25b8e3674c701f12edf19
5913 Author: Stefan Roese <sr@denx.de>
5914 Date: Mon Nov 26 15:01:45 2007 +0100
5916 ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
5918 Signed-off-by: Stefan Roese <sr@denx.de>
5920 commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
5921 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5922 Date: Sun Nov 25 18:45:47 2007 +0100
5924 Makefile : fix tags ctags etags with new drivers organization
5926 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5928 commit 59829cc189378c142c13d2aa8d9a897d8bef3961
5929 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5930 Date: Sat Nov 24 21:26:56 2007 +0100
5932 drivers/mtd : move mtd drivers to drivers/mtd
5934 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5936 commit 318c0b90431f2648552e5ade78833f42652ce859
5937 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5938 Date: Sat Nov 24 21:17:55 2007 +0100
5940 drivers/misc : move misc drivers to drivers/misc
5942 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5944 commit 33daf5b7858807cb4ce4158c2c56524671c14c08
5945 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5946 Date: Sat Nov 24 21:13:59 2007 +0100
5948 drivers/block : move block drivers to drivers/block
5950 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5952 commit 0c698dcaa70275eb8814f665b545547cee013892
5953 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5954 Date: Sat Nov 24 20:59:50 2007 +0100
5956 drivers/rtc : move rtc drivers to drivers/rtc
5958 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5960 commit f868cc5a50757d94f36c312395481cb0f187d9e6
5961 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5962 Date: Sat Nov 24 20:14:44 2007 +0100
5964 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
5966 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5968 commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
5969 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5970 Date: Sat Nov 24 19:46:45 2007 +0100
5972 drivers/input : move input drivers to drivers/input
5974 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5976 commit e4558666293364fc3af1c1d9381ca933fa0f1275
5977 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5978 Date: Sat Nov 24 19:40:11 2007 +0100
5980 drivers/usb : move usb drivers to drivers/usb
5982 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5984 commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
5985 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5986 Date: Sat Nov 24 19:33:38 2007 +0100
5988 drivers/serial : move serial drivers to drivers/serial
5990 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5992 commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
5993 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5994 Date: Wed Nov 21 21:19:24 2007 +0100
5996 drivers/net : move net drivers to drivers/net
5998 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6000 commit 352d259130b349fe9593b8dada641bd78a9659e5
6001 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6002 Date: Tue Nov 20 20:41:48 2007 +0100
6004 drivers/video : move video drivers to drivers/video
6006 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6008 commit 73646217186aa17afc8e305c5f06f06dd335eaad
6009 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6010 Date: Tue Nov 20 20:33:09 2007 +0100
6012 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
6014 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6016 commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
6017 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6018 Date: Tue Nov 20 20:28:09 2007 +0100
6020 drivers/pci : move pci drivers to drivers/pci
6022 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6024 commit 9162352817579840d7802da6d85872b3ca003c97
6025 Author: Gerald Van Baren <vanbaren@cideas.com>
6026 Date: Thu Nov 22 17:23:23 2007 -0500
6028 Fix fdt printing for updated libfdt
6030 Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
6032 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
6034 commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
6035 Author: Kumar Gala <galak@kernel.crashing.org>
6036 Date: Wed Nov 21 13:30:15 2007 -0600
6038 Add additional fdt fixup helper functions
6040 Added the following fdt fixup helpers:
6041 * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
6042 * do_fixup_by_compat{_u32} - Find matching nodes by compat
6044 The _u32 variants work the same only the property they are setting
6045 is know to be a 32-bit integer instead of a byte buffer.
6047 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6049 commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
6050 Author: Kumar Gala <galak@kernel.crashing.org>
6051 Date: Wed Nov 21 11:11:03 2007 -0600
6053 Add fdt_fixup_ethernet helper to set mac addresses
6055 Added a fixup helper that uses aliases to set mac addresses
6056 in the device tree based on the bd_t
6058 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6060 commit dbaf07ce620aab249e3502b20a986234a6af1d3a
6061 Author: Kumar Gala <galak@kernel.crashing.org>
6062 Date: Wed Nov 21 14:07:46 2007 -0600
6064 Fix warnings from import of libfdt
6066 cmd_fdt.c: In function fdt_print:
6067 cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
6068 cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
6069 cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
6070 cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
6072 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6074 commit 8d04f02f6224e6983f4812ea4da704950ec8539c
6075 Author: Kumar Gala <galak@kernel.crashing.org>
6076 Date: Wed Oct 24 11:04:22 2007 -0500
6078 Update libfdt from device tree compiler (dtc)
6080 Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
6081 the device tree compiler (dtc) project.
6083 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6085 commit e93becf80d732b64aef81b23e8b6ece02c40533d
6086 Author: Kumar Gala <galak@kernel.crashing.org>
6087 Date: Sat Nov 3 19:46:28 2007 -0500
6089 Move do_fixup* for libfdt into common code
6091 Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
6092 into common/fdt_support.c and renamed:
6094 do_fixup() -> do_fixup_by_path()
6095 do_fixup_u32() -> do_fixup_by_path_u32()
6097 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6099 commit f738b4a75998f42a7408defadc9baac7a31c92db
6100 Author: Kumar Gala <galak@kernel.crashing.org>
6101 Date: Thu Oct 25 16:15:07 2007 -0500
6103 Make no options to fdt print default to '/'
6105 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6107 commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
6108 Author: Kumar Gala <galak@kernel.crashing.org>
6109 Date: Wed Oct 24 10:21:57 2007 -0500
6111 Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
6114 fdt_node_is_compatible
6115 fdt_find_node_by_type
6116 fdt_find_compatible_node
6118 To ease merge of newer libfdt as we aren't using them anywhere at this time.
6120 Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
6123 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6125 commit 98e2867cc85409b919f862e6c16026461ec955df
6126 Author: Grant Likely <grant.likely@secretlab.ca>
6127 Date: Wed Nov 21 09:19:37 2007 -0700
6129 [BUILD] Remove libraries when updating autoconf.mk
6131 Fix library problems caused by conditional compilation. Using
6132 autoconf.mk to decide which files to compile has caused a problem when
6133 changing configuration from one board to another without clearing out
6134 the library (*.a) files.
6136 It used to be that the linker was always passed the same list of .o
6137 files when building the .a files. However, that is not longer true
6138 with conditional compilation. Now, a different board config will have
6139 a different file list passed to the linker. The problem occurs when
6140 a library has already been built and the board config is changed.
6142 Since the linker will update instead of replace a preexisting library,
6143 then if the file list changes to remove some object files the old
6144 objects will still exist in the library.
6146 The solution is to remove all old library files when autoconf.mk is
6149 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6151 commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
6152 Author: Kumar Gala <galak@kernel.crashing.org>
6153 Date: Wed Nov 21 08:49:50 2007 -0600
6155 [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
6157 Modify libfdt/Makefile to conditionally compile the *.c files based
6158 on the board config.
6160 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6162 commit 4a43719a7738712811d822ca8125427b27a55cdc
6163 Author: Grant Likely <grant.likely@secretlab.ca>
6164 Date: Mon Sep 24 09:05:31 2007 -0600
6166 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
6168 Modify common/Makefile to conditionally compile the cmd_*.c files based
6169 on the board config.
6171 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6173 commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
6174 Author: Grant Likely <grant.likely@secretlab.ca>
6175 Date: Mon Sep 24 09:05:31 2007 -0600
6177 [BUILD] Generate include/autoconf.mk from board config files
6179 Use cpp and sed to postprocess config.h and import the defined values
6180 into include/autoconf.mk. autoconf.mk is then included by config.mk to
6181 give 'make' access to the board configuration.
6183 Doing this enables conditional compilation at the Makefile level instead
6184 of by wrapping every .c file with #ifdef/#endif wrappers.
6186 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6188 commit 68b88999da87ab88e71e1306192905be3450198e
6189 Author: Jon Loeliger <jdl@freescale.com>
6190 Date: Tue Nov 20 15:02:26 2007 -0600
6192 8610HPCD: Enable the 8610 Display Interface Unit
6194 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6196 commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
6197 Author: Jon Loeliger <jdl@freescale.com>
6198 Date: Tue Nov 20 15:00:53 2007 -0600
6200 Move 8610 DIU interface structure definitions to header file.
6202 These two structures are still needed during the
6203 initialization and setup of the DIU hardware.
6204 So move them to the fsl_diu_fb.h file for now.
6207 Noticed-by: York Sun <yorksun@freescale.com>
6208 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6210 commit 080c646dbf474a109c3f85718fb01ce042a38c45
6211 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6212 Date: Tue Nov 20 20:14:18 2007 +0100
6214 drivers/i2c : move i2c drivers to drivers/i2c
6216 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6218 commit 9a337ddc154a10a26f117fd147b009abcdeba75a
6219 Author: Wolfgang Denk <wd@denx.de>
6220 Date: Mon Nov 19 22:20:24 2007 +0100
6222 Prepare for 1.3.0 release.
6224 Signed-off-by: Wolfgang Denk <wd@denx.de>
6226 commit f30ad49b16bf998b03c1a5228b6c86369d61c258
6227 Author: Haiying Wang <Haiying.Wang@freescale.com>
6228 Date: Mon Nov 19 10:02:13 2007 -0500
6230 Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
6232 CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
6234 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
6236 commit f8c320609366176b31104d9bf5e295232e1c7f1d
6237 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
6238 Date: Mon Nov 19 11:14:16 2007 +0900
6240 [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
6242 lowlevel_init.S: Assembler messages:
6243 lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
6245 Looking at codes, the `memtest' and `clearmem' are intentional mixed
6246 use of `global symbols' and `label' for debugging purpose. To make it
6247 build, just disable global-symbols-use for now. As a result `memtest'
6248 still remains as unused, but leave it be...
6250 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
6252 commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
6253 Author: Wolfgang Denk <wd@denx.de>
6254 Date: Mon Nov 19 12:59:14 2007 +0100
6256 Fix build problems with mp2usb board
6258 Signed-off-by: Wolfgang Denk <wd@denx.de>
6260 commit 6bf4c686afca1e86e1c384d59218f914605713bf
6261 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6262 Date: Sun Nov 18 18:36:11 2007 +0100
6264 s3c24x0: Fix usb_ohci.c missing in Makefile
6265 and usb_ohci.c warning differ in signedness
6267 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6269 commit 6073f61e078da5ddb521b56256bcc36508589883
6270 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6271 Date: Sun Nov 18 12:55:02 2007 +0100
6273 pb1x00 board: Fix u16 status declaration when PCMCIA is defined
6275 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6277 commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
6278 Author: Wolfgang Denk <wd@denx.de>
6279 Date: Sun Nov 18 17:11:09 2007 +0100
6281 Fix compiler warnings for ARM systems.
6283 Signed-off-by: Wolfgang Denk <wd@denx.de>
6285 commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
6286 Author: Wolfgang Denk <wd@denx.de>
6287 Date: Sun Nov 18 16:36:27 2007 +0100
6289 Fix compiler warnings for PPC systems. Update CHANGELOG.
6291 Signed-off-by: Wolfgang Denk <wd@denx.de>
6293 commit 653811a3c2b35856bf12e196dcc8c4694e28e420
6294 Author: Stefan Roese <sr@denx.de>
6295 Date: Sun Nov 18 14:44:44 2007 +0100
6297 ppc4xx: Correct 405EX PCIe UTL register mapping
6299 Map 4k mem space for UTL registers for each port.
6301 Signed-off-by: Stefan Roese <sr@denx.de>
6303 commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
6304 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6305 Date: Sat Nov 17 11:31:10 2007 +0100
6307 Fix warning differ in signedness in net/net.c and net/nfs.c
6309 commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
6310 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6311 Date: Sat Nov 17 20:42:45 2007 +0900
6313 gth2.c: Fix a warning on gth2 build.
6315 gth2.c: In function 'misc_init_r':
6316 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
6318 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6320 commit 2309c130aa4c84b91bd874a41269c923eb61b555
6321 Author: Stefan Roese <sr@denx.de>
6322 Date: Sat Nov 17 07:58:25 2007 +0100
6324 Fix warning differ in signedness in common/cmd_scsi.c
6326 Signed-off-by: Stefan Roese <sr@denx.de>
6328 commit 9ea61b57968554eaf0f474ec7e088b17d367f474
6329 Author: Stefan Roese <sr@denx.de>
6330 Date: Sat Nov 17 14:52:29 2007 +0100
6332 ppc4xx: Update AMCC Kilauea config file
6334 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
6336 Signed-off-by: Stefan Roese <sr@denx.de>
6338 commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
6339 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6340 Date: Sat Nov 17 20:05:26 2007 +0900
6342 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
6344 Current trick to pick up GNU assembler minor version does not work with the
6345 latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
6348 $ sde-as --version |grep "GNU assembler"
6349 GNU assembler 2.15.94 mipssde-6.02.02-20050602
6350 $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
6352 $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
6356 $ mips-linux-as --version |grep "GNU assembler"
6357 GNU assembler (GNU Binutils) 2.18
6358 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
6360 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
6364 As a result of above, you'll see many noises with such binutils:
6367 /bin/sh: line 0: [: : integer expression expected
6368 /bin/sh: line 0: [: : integer expression expected
6369 make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
6370 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
6371 /bin/sh: line 0: [: : integer expression expected
6372 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
6373 /bin/sh: line 0: [: : integer expression expected
6374 mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
6375 /bin/sh: line 0: [: : integer expression expected
6377 This patch simplifies the trick and makes it work with both versions of gas.
6378 I also replace an expensive `awk (or gawk)' with `cut'.
6380 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6382 commit 16664f72850846e645616da1c0fa5afcd6d15f15
6383 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6384 Date: Sat Nov 17 20:05:26 2007 +0900
6386 [MIPS] Remove useless instructions for initializing $gp.
6388 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6390 commit 03c031d5660ea946c39af6e2e16267da857c609f
6391 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6392 Date: Sat Oct 27 15:27:06 2007 +0900
6394 [MIPS] MIPS 4K core: Coding style cleanups
6398 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6400 commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
6401 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6402 Date: Sat Nov 17 20:05:20 2007 +0900
6404 [MIPS] gth2.c: Fix a warning on gth2 build.
6406 gth2.c: In function 'misc_init_r':
6407 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
6409 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6411 commit 4fbd0741b2b6441da10be93e10267122581b7079
6412 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6413 Date: Sat Oct 27 15:22:33 2007 +0900
6415 [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
6417 au1x00_eth.c: In function 'au1x00_miiphy_write':
6418 au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
6420 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6422 commit f01320459736f156707425cf8112f98606301aa4
6423 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6424 Date: Sat Oct 27 15:00:25 2007 +0900
6426 [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
6428 au1x00_eth.c: In function 'au1x00_enet_initialize':
6429 au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
6430 au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
6431 au1x00_eth.c:246: error: for each function it appears in.)
6432 au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
6433 au1x00_eth.c: In function 'au1x00_miiphy_write':
6434 au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
6435 make[1]: *** [au1x00_eth.o] Error 1
6437 Fixed by moving these two functions forward.
6439 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6441 commit b09258c5393edd1087c5f39ae68338f16b49f8b3
6442 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6443 Date: Sat Oct 27 15:00:25 2007 +0900
6445 MAKEALL: Added missing pb1000 board
6447 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6449 commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
6450 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6451 Date: Sat Oct 27 15:00:24 2007 +0900
6453 [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
6455 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6457 commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
6458 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6459 Date: Sat Oct 27 15:00:24 2007 +0900
6461 [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
6463 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6465 commit 5947f6999aafa7c54c1390983d264a8463dfea8e
6466 Author: Wolfgang Denk <wd@denx.de>
6467 Date: Sat Nov 17 02:34:38 2007 +0100
6469 Update CHANGELOIG, prepare for -rc4
6471 Signed-off-by: Wolfgang Denk <wd@denx.de>
6473 commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
6474 Author: Luotao Fu <l.fu@pengutronix.de>
6475 Date: Wed Nov 14 18:58:33 2007 +0100
6477 Fix the i2c frequency and default address in rsdproto board
6479 rsdproto board support has wrong I2C frequency and wrong return value
6482 Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
6484 commit 429c180edad038f91c989cb14b478228092e7054
6485 Author: Wolfgang Denk <wd@denx.de>
6486 Date: Sat Nov 17 01:45:38 2007 +0100
6488 powerpc: Backout relocation changes for MPC5121, too.
6490 Apply Grant Likely's backout to MPC5121 code, too.
6492 Pointed out by Rafal Jaworowski <raj@semihalf.com>
6494 Signed-off-by: Wolfgang Denk <wd@denx.de>
6496 commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
6497 Author: Grant Likely <grant.likely@secretlab.ca>
6498 Date: Tue Nov 13 22:18:33 2007 -0700
6500 powerpc: Backout relocation changes.
6502 Ugh. I *hate* to back this change out, but these compiler flags don't
6503 work for relocation on all versions of GCC. I've not been able to
6504 reproduce the environment in my setup (and hence, not been able to
6505 find a combination that *does* work), so I've got no choice but to go
6506 back to the old gcc flags and linker script.
6508 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6510 commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
6511 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6512 Date: Tue Nov 13 09:11:05 2007 +0100
6514 Fixed mips_io_port_base build errors.
6516 This patch has been sent on:
6519 Although mips_io_port_base is currently a part of IDE command, it is quite
6520 fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
6521 it to MIPS general part, and introduce `set_io_port_base()' from Linux.
6523 This patch is triggered by multiple definition of `mips_io_port_base' build
6524 error on gth2 (and tb0229 also needs this fix.)
6526 board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
6527 /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
6528 common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
6529 make: *** [u-boot] Error 1
6531 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6532 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6534 commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
6535 Author: Wolfgang Denk <wd@denx.de>
6536 Date: Sat Nov 17 01:30:40 2007 +0100
6538 Fix a bug in the slave serial programming mode for the Xilinx
6539 Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
6540 the most significant bit was set, which did not work on any
6541 architecture where "char" defaulted to be an unsigned type.
6543 Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
6545 Signed-off-by: Wolfgang Denk <wd@denx.de>
6547 commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
6548 Author: Jon Loeliger <jdl@freescale.com>
6549 Date: Thu Nov 1 12:23:29 2007 -0500
6551 86xx: Fix broken variable reference when #def DEBUGing.
6553 Sometimes you can't reference the DDR2 controller variables.
6555 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6557 commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
6558 Author: Jason Jin <Jason.jin@freescale.com>
6559 Date: Fri Oct 26 18:32:00 2007 +0800
6561 make 8610 board use pixis reset
6563 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
6565 commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
6566 Author: Jason Jin <Jason.jin@freescale.com>
6567 Date: Mon Oct 29 19:26:21 2007 +0800
6569 Unify pixis_reset altbank across board families
6571 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
6572 into the separate board config files.
6574 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
6575 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6577 commit 64bf555465c7926be13e1046ac0d0f05ac72829c
6578 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6579 Date: Wed Nov 7 08:19:21 2007 +0100
6581 Fix warning: pointer targets in assignment differ in signedness
6583 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6585 commit 7a60ee7c6248a958c5757d3660a1702723a2786d
6586 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6587 Date: Wed Nov 7 08:19:19 2007 +0100
6589 Fix warning differ in signedness in common/cmd_ide.c
6591 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6593 commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
6594 Author: Stefan Roese <sr@denx.de>
6595 Date: Fri Nov 16 14:16:54 2007 +0100
6597 ppc4xx: Enable 405EX PCIe UTL register configuration
6599 Till now the UTL registers on 405EX were not initialized but left with
6600 their default values. This patch new initializes some of the UTL
6603 Signed-off-by: Stefan Roese <sr@denx.de>
6605 commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
6606 Author: Stefan Roese <sr@denx.de>
6607 Date: Fri Nov 16 14:00:59 2007 +0100
6609 ppc4xx: Update AMCC Makalu for board rev 1.1
6611 This patch adds changes needed for Makalu rev 1.1:
6613 - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
6614 - Enable 2nd ethernet port EMAC1
6615 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
6616 - Reset PCIe ports via GPIO upon bootup
6618 Signed-off-by: Stefan Roese <sr@denx.de>
6620 commit 4d4faae65e115e327425cd514c1a35146a85166b
6621 Author: Grant Likely <grant.likely@secretlab.ca>
6622 Date: Mon Sep 24 09:05:31 2007 -0600
6624 Group PCI and PCMCIA drivers in drivers/Makefile
6626 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6628 commit 5798f87dc10a496d79d3177b9f5a76488987fd35
6629 Author: Grant Likely <grant.likely@secretlab.ca>
6630 Date: Mon Sep 24 09:05:31 2007 -0600
6632 Group block/flash drivers in drivers/Makefile
6634 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6636 commit df58c81551700f058b44cacf55a7997fa63bfe0a
6637 Author: Grant Likely <grant.likely@secretlab.ca>
6638 Date: Mon Sep 24 09:05:31 2007 -0600
6640 Group USB drivers in drivers/Makefile
6642 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6644 commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
6645 Author: Grant Likely <grant.likely@secretlab.ca>
6646 Date: Mon Sep 24 09:05:30 2007 -0600
6648 Group i2c drivers in drivers/Makefile
6650 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6652 commit ec00c76de0e5971273905998d62d6bb119324218
6653 Author: Grant Likely <grant.likely@secretlab.ca>
6654 Date: Mon Sep 24 09:05:30 2007 -0600
6656 Group console drivers in drivers/Makefile
6658 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6660 commit 754f230aa01b8c789fc31f8013c2487954073300
6661 Author: Grant Likely <grant.likely@secretlab.ca>
6662 Date: Mon Sep 24 09:05:30 2007 -0600
6664 Group network drivers in drivers/Makefile
6666 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6668 commit f0037c56b0d12cd46215124667b9f83d60ef9391
6669 Author: Grant Likely <grant.likely@secretlab.ca>
6670 Date: Mon Sep 24 09:05:30 2007 -0600
6672 Build: split COBJS value into multiple lines
6674 This change is in preparation for condtitionial compile support in the
6675 build system. By spliting them all into seperate lines now, subsequent
6676 patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
6677 be less invasive and easier to review
6679 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6681 commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
6682 Author: Grant Likely <grant.likely@secretlab.ca>
6683 Date: Mon Sep 24 09:05:30 2007 -0600
6685 Add .gitignore files
6687 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6688 Acked-by: Kim Phillips <kim.phillips@freescale.com>
6690 commit 955413f35f054a82e40042f1dbcf501c6a05719b
6691 Author: Grant Likely <grant.likely@secretlab.ca>
6692 Date: Thu Nov 15 08:27:52 2007 -0700
6694 Revert "Correct relocation fixup for mpc5xx"
6696 This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
6697 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6699 commit e15633888a058aacb31a62d2cf1278e1e4c236ab
6700 Author: Grant Likely <grant.likely@secretlab.ca>
6701 Date: Thu Nov 15 08:24:32 2007 -0700
6703 Revert "Correct fixup relocation for MPC5xxx"
6705 This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
6706 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6708 commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
6709 Author: Grant Likely <grant.likely@secretlab.ca>
6710 Date: Thu Nov 15 08:21:04 2007 -0700
6712 Revert "Correct fixup relocation for mpc8220"
6714 This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
6715 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6717 commit 70922342369e5e39b286fe21e768a239ca07a514
6718 Author: Grant Likely <grant.likely@secretlab.ca>
6719 Date: Thu Nov 15 08:20:57 2007 -0700
6721 Revert "Correct fixup relocation for mpc824x"
6723 This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
6724 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6726 commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
6727 Author: Grant Likely <grant.likely@secretlab.ca>
6728 Date: Thu Nov 15 08:20:50 2007 -0700
6730 Revert "Correct fixup relocation for mpc8260"
6732 This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
6733 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6735 commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
6736 Author: Grant Likely <grant.likely@secretlab.ca>
6737 Date: Thu Nov 15 08:20:43 2007 -0700
6739 Revert "Correct fixup relocation for mpc83xx"
6741 This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
6742 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6744 commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
6745 Author: Grant Likely <grant.likely@secretlab.ca>
6746 Date: Thu Nov 15 08:20:25 2007 -0700
6748 Revert "[MPC512x] Correct fixup relocation"
6750 This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
6751 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
6753 commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
6754 Author: Stefan Roese <sr@denx.de>
6755 Date: Thu Nov 15 14:25:09 2007 +0100
6757 ppc4xx: Small AMCC Kilauea cleanup
6759 Remove not needed pci_target_init() function.
6761 Signed-off-by: Stefan Roese <sr@denx.de>
6763 commit aee747f19b460a0e9da20ff21e90fdaac1cec359
6764 Author: Stefan Roese <sr@denx.de>
6765 Date: Thu Nov 15 14:23:55 2007 +0100
6767 ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
6769 - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
6770 - Cleanup of the 4xx GPIO functions
6771 - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
6773 Signed-off-by: Stefan Roese <sr@denx.de>
6775 commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
6776 Author: Stefan Roese <sr@denx.de>
6777 Date: Thu Nov 15 14:20:08 2007 +0100
6779 ppc4xx: AMCC Taihu board config file cleanup
6781 This patch makes the AMCC Taihu a little more compatible to the other
6784 Signed-off-by: Stefan Roese <sr@denx.de>
6786 commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
6787 Author: Marian Balakowicz <m8@semihalf.com>
6788 Date: Thu Nov 15 13:37:28 2007 +0100
6790 [INKA4x0] NG hardware: flash support
6792 Disabled and remove inka4x0 custom flash driver, use CFI flash
6795 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6797 commit 5fb6d7191e206cdde0e23140fd8111caed93a595
6798 Author: Marian Balakowicz <m8@semihalf.com>
6799 Date: Thu Nov 15 13:29:55 2007 +0100
6801 [INKA4x0] NG hardware: SDRAM support
6803 Add support for three new DDR chips that may be present on a NG
6804 INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
6806 Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
6808 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6810 commit f23cb34c367bb27585a4fdb8a75277370e7d0596
6811 Author: Marian Balakowicz <m8@semihalf.com>
6812 Date: Thu Nov 15 13:24:43 2007 +0100
6814 [INKA4x0] NG hardware: platform code update
6816 - Cleanup compile warnings.
6817 - Add missing '\0' in default environment.
6818 - Increase CFG_MONITOR_LEN to 256 KiB.
6819 - Add required CFG_USE_PPCENV.
6821 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6823 commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
6824 Author: Peter Pearse <peter.pearse@arm.com>
6825 Date: Thu Nov 15 08:58:00 2007 +0000
6827 Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
6828 Remove warnings re onenand_read() & write()
6830 commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
6831 Author: Peter Pearse <peter.pearse@arm.com>
6832 Date: Thu Nov 15 08:45:13 2007 +0000
6836 commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
6837 Author: Roy Zang <tie-fei.zang@freescale.com>
6838 Date: Thu Sep 13 18:52:28 2007 +0800
6840 Enable ULi1575 Ethernet support in 8610HPCD config
6842 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
6843 Acked-by: Jon Loeliger <jdl@freescale.com>
6845 commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
6846 Author: Stefan Roese <sr@denx.de>
6847 Date: Tue Nov 13 08:18:20 2007 +0100
6849 ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
6851 Signed-off-by: Stefan Roese <sr@denx.de>
6853 commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
6854 Author: Stefan Roese <sr@denx.de>
6855 Date: Tue Nov 13 08:06:11 2007 +0100
6857 ppc4xx: Fix 405EX PCIe UTLSET register setup
6859 Signed-off-by: Stefan Roese <sr@denx.de>
6861 commit 1ce55151c85d068f70317a8d65c61058b891afb4
6862 Author: Heiko Schocher <hs@denx.de>
6863 Date: Tue Nov 13 07:50:29 2007 +0100
6865 [UC101] SRAM now with 2 MB working.
6867 Signed-off-by: Heiko Schocher <hs@denx.de>
6869 commit 2d14684341109a69616e4d6016cd61402d55086f
6870 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6871 Date: Fri Nov 9 15:37:53 2007 +0100
6873 ppc4xx: Use generic usb-ohci driver for sequoia board
6875 This patch makes the sequoia board use the generic usb-ohci driver
6876 instead of cpu/ppc4xx/usb_ohci.c.
6878 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6879 Signed-off-by: Stefan Roese <sr@denx.de>
6881 commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
6882 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6883 Date: Fri Nov 9 15:37:23 2007 +0100
6885 ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
6887 This patch disables the 44x d-cache on 'usb start' and
6888 reenables it on 'usb stop'. This should be seen as a
6889 temporary fix until the generic usb-ohci driver can
6890 life with d-cache enabled.
6892 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6893 Signed-off-by: Stefan Roese <sr@denx.de>
6895 commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
6896 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6897 Date: Fri Nov 9 15:36:44 2007 +0100
6899 ppc4xx: Remove redundant code from 4xx network driver
6901 This patch removes some redundant code and decrements the end
6902 address of cache flush and invalidate by 1.
6904 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6905 Signed-off-by: Stefan Roese <sr@denx.de>
6907 commit 5ca9881aad8c413ac2a82868a5e3719178254502
6908 Author: Peter Pearse <peter.pearse@arm.com>
6909 Date: Fri Nov 9 15:24:26 2007 +0000
6911 Add apollon board support
6912 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
6914 commit b53313dbfc74525d85f1e7e0102f902d5c863beb
6915 Author: Stefan Roese <sr@denx.de>
6916 Date: Fri Nov 9 12:19:58 2007 +0100
6918 ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
6920 Signed-off-by: Stefan Roese <sr@denx.de>
6922 commit c7f69c340277935a6c19a956421852da944a365f
6923 Author: Stefan Roese <sr@denx.de>
6924 Date: Fri Nov 9 12:18:54 2007 +0100
6926 ppc4xx: Make output a little shorter on I2C bootrom detection
6928 Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
6929 already print a line with the information which I2C bootrom is
6930 used for bootstrap configuration. So we don't need this extra line
6931 with "I2C boot EEPROM en-/dis-abled".
6933 This patch also has a little code cleanup integrated.
6935 Signed-off-by: Stefan Roese <sr@denx.de>
6937 commit 8d737a28152ec12873f8544cca1fb39a49e5e693
6938 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6939 Date: Thu Nov 8 12:50:18 2007 -0600
6941 ColdFire: MCF5329 - Remove reset registers from CCM
6943 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6945 commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
6946 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6947 Date: Thu Nov 8 12:31:11 2007 -0600
6949 ColdFire: MCF5329 - Add Reset structure to immap_5329.h
6951 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6953 commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
6954 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6955 Date: Thu Nov 8 12:19:01 2007 -0600
6957 ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
6959 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6961 commit 225a24b5e062ad94627424508ae814f51dbe1a34
6962 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6963 Date: Wed Nov 7 18:00:54 2007 -0600
6965 ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
6967 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6969 commit 248c7c14835f34d5d910b45e5600050e58ca6cab
6970 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6971 Date: Wed Nov 7 17:56:15 2007 -0600
6973 ColdFire: MCF532x - Update do_reset() using core reset
6975 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6977 commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
6978 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6979 Date: Wed Nov 7 17:51:00 2007 -0600
6981 ColdFire: Update cpu flag for 4.2-xx compiler
6983 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6985 commit 070ba56115b4da63b46e974287fa4550d4023386
6986 Author: York Sun <yorksun@freescale.com>
6987 Date: Wed Oct 31 14:59:04 2007 -0500
6989 8610: Add console frame buffer support to FSL 8610 DIU driver.
6991 Add cfb console support to FSL 8610 DIU driver.
6992 Inspect board version from PIXIS to obtain correct pixel format.
6994 Use #define CONFIG_VIDEO in config file to enable fb console.
6996 To switch monitor, set monitor variable to
6997 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
6998 followed by "diufb init".
7000 Preserve logo bitmap at the top of the fb console.
7002 Signed-off-by: York Sun <yorksun@freescale.com>
7003 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7005 commit a877880c6949e948bd63cd6ea4e216573d2f53dd
7006 Author: York Sun <yorksun@freescale.com>
7007 Date: Mon Oct 29 13:58:39 2007 -0500
7009 8610: Add 8610 DIU display driver
7011 1280x1024 and 1024x768 @ 32 bpp are supported now.
7012 DVI, Single-link LVDS, Double-link LVDS are all supported.
7014 Environmental variable "monitor" is used to specify monitor port.
7016 A new command "diufb" is introduced to reinitialize monitor
7017 and display a BMP file in the memory. So far, 1-bit, 4-bit,
7018 8-bit and 24-bit BMP formats are supported.
7021 - initialize the diu driver
7022 Enable the port specified in the environmental variable "monitor"
7025 - display bmp file in memory.
7026 The bmp image should be no bigger than the resolution, 1280x1024
7027 for DVI and double-link LVDS, 1024x768 for single-link LVDS.
7029 Note, this driver allocate memory but doesn't free it after use
7030 It is written on purpose -- to avoid a failure of reallocation
7031 due to memory fragement.
7033 ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
7035 Signed-off-by: York Sun <yorksun@freescale.com>
7036 Signed-off-by: Jon loeliger <jdl@freescale.com>
7038 commit 52e5ddfecdda308f75782fae206b677b1810f5f9
7039 Author: York Sun <yorksun@freescale.com>
7040 Date: Wed Oct 31 10:43:59 2007 -0500
7042 FSL: Add a freescale bitmap logo.
7044 This Freescale logo is a 340 x 128 x 4bpp BMP file
7045 that can be displayed by the DIU Framebuffer driver.
7047 Signed-off-by: York Sun <yorksun@freescale.com>
7048 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7050 commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
7051 Author: York Sun <yorksun@freescale.com>
7052 Date: Mon Oct 29 13:57:53 2007 -0500
7054 8610: Make some extra debug environment variables conditional.
7056 One may #define ENV_DEBUG to get them back again.
7058 Signed-off-by: York Sun <yorksun@freescale.com>
7060 commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
7061 Author: Jason Jin <Jason.jin@freescale.com>
7062 Date: Mon Oct 29 19:26:21 2007 +0800
7064 8610: Actually enable pixis_reset CONFIGs
7066 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
7068 commit f3bceaab230b4748d0afc4109b6837308f018b40
7069 Author: Jason Jin <Jason.jin@freescale.com>
7070 Date: Fri Oct 26 18:31:59 2007 +0800
7072 Fix the BAT definition of PCI IO on 8610 board
7074 The address in the BAT register is aligned with the BAT size.
7075 The original definition actually did not define BAT for PCIE2 IO.
7076 This patch fix this.
7078 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
7080 commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
7081 Author: Jason Jin <Jason.jin@freescale.com>
7082 Date: Mon Oct 29 19:26:21 2007 +0800
7084 Unify pixis_reset altbank across board families
7086 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
7087 into the separate board config files.
7089 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
7090 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7092 commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
7093 Author: Jason Jin <Jason.jin@freescale.com>
7094 Date: Fri Oct 26 18:32:00 2007 +0800
7096 make 8610 board use pixis reset
7098 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
7100 commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
7101 Author: Jon Loeliger <jdl@freescale.com>
7102 Date: Thu Nov 1 12:23:29 2007 -0500
7104 86xx: Fix broken variable reference when #def DEBUGing.
7106 Sometimes you can't reference the DDR2 controller variables.
7108 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7110 commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
7111 Author: Roy Zang <tie-fei.zang@freescale.com>
7112 Date: Mon Nov 5 17:39:24 2007 +0800
7114 Implement general ULi 526x Ethernet driver support in U-boot
7116 This patch implements general ULi 526x Ethernet driver.
7117 Until now, it is the only native Ethernet port on
7118 MPC8610HPCD board, but it could be used on other boards
7119 with ULi 526x Ethernet port as well.
7121 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
7122 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
7123 Acked-by: Jon Loeliger <jdl@freescale.com>
7124 Signed-off-by: Ben Warren <bwarren@qstreams.com>
7126 commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
7127 Author: Larry Johnson <lrj@arlinx.com>
7128 Date: Thu Nov 1 08:46:50 2007 -0500
7130 NET: Add Ethernet 1000BASE-X support for PPC4xx
7132 This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
7133 "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
7134 returns non-zero iff the PHY registers are configured for 1000BASE-X. The
7135 "mii info" command is modified to distinguish between 1000BASE-T and -X.
7137 Signed-off-by: Larry Johnson <lrj@acm.org>
7138 Signed-off-by: Ben Warren <bwarren@qstreams.com>
7140 commit 298035df4948b113d29ac0e694717d34b95bc5dc
7141 Author: Larry Johnson <lrj@arlinx.com>
7142 Date: Wed Oct 31 11:21:29 2007 -0500
7144 NET: Cosmetic changes
7146 Signed-off-by: Larry Johnson <lrj@acm.org>
7147 Signed-off-by: Ben Warren <bwarren@qstreams.com>
7149 commit 654f38b3a387886996a5a75771fbfc29cb4f225e
7150 Author: Stefan Roese <sr@denx.de>
7151 Date: Mon Nov 5 07:43:05 2007 +0100
7153 ppc4xx: Make output a little shorter on PCIe detection
7155 Now not max 3 lines but 2 lines are printed per PCIe port.
7157 Signed-off-by: Stefan Roese <sr@denx.de>
7159 commit 992742a5b09d9040adbd156fb90756af66ade310
7160 Author: Wolfgang Denk <wd@denx.de>
7161 Date: Sat Nov 3 23:09:27 2007 +0100
7163 Cleanup coding style; update CHANGELOG
7165 Signed-off-by: Wolfgang Denk <wd@denx.de>
7167 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
7168 Author: Bruce Adler <bruce.adler@ccpu.com>
7169 Date: Fri Nov 2 13:15:42 2007 -0700
7171 fix wording in README
7173 Changed the wording to properly describe the shadowing
7174 of the environment from ROM to RAM
7176 Signed-off-by: Bruce Adler <bruce.adler@acm.org>
7178 commit ad845beef06245426c57b53dcdc01b7dc70e0d45
7179 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7180 Date: Wed Oct 31 02:18:15 2007 +0900
7182 blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
7184 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7186 commit ec22755799466c8a103664bb3a5e647bf9c238f4
7187 Author: Vlad Lungu <vlad@comsys.ro>
7188 Date: Thu Oct 25 16:08:14 2007 +0300
7190 Trimmed some variables in ne2000.c
7192 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
7194 commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
7195 Author: Zhang Wei <wei.zhang@freescale.com>
7196 Date: Thu Oct 25 17:51:27 2007 +0800
7198 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
7200 The scan code of the key 'z' is 0x1d, which should be handled.
7202 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
7205 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
7207 commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
7208 Author: Zhang Wei <wei.zhang@freescale.com>
7209 Date: Thu Oct 25 17:30:04 2007 +0800
7211 Fix USB support issue for MPC8641HPCN board.
7213 The configuration file has already enabled USB, but it
7214 missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
7215 on MPC8641HPCN can not work because of the wrong USB
7218 And add the USB command to U-Boot commands list.
7220 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
7222 commit 4e62041023dc3de9d98d977bb080235bc6d035e0
7223 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7224 Date: Wed Oct 24 18:16:01 2007 +0200
7226 Use config_cmd_default.h instead of config_cmd_all.h
7228 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7230 commit 56622f87857439b1c221e9deef11a9d5bb5d4308
7231 Author: Marian Balakowicz <m8@semihalf.com>
7232 Date: Wed Oct 24 01:37:36 2007 +0200
7234 TQM5200: Call usb_cpu_init() during board init
7236 usb_cpu_init() configures GPS USB pins, clocks, etc. and
7237 is required for proper operation of kernel USB subsystem.
7238 This setup was previously done in the kernel by the fixup
7239 code which is being removed, thus low level init must be
7242 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7244 commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
7245 Author: Guennadi Liakhovetski <lg@denx.de>
7246 Date: Tue Oct 23 16:25:50 2007 +0200
7250 An obvious typo. Originally fixed in linkstation u-boot port.
7252 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
7254 commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
7255 Author: Guennadi Liakhovetski <lg@denx.de>
7256 Date: Tue Oct 23 14:35:05 2007 +0200
7258 Fix a typo in cpu/mpc824x/interrupts.c
7260 Since December 2003 the timer_interrupt_cpu() function in
7261 cpu/mpc824x/interrupts.c contains what seems to be a superfluous
7262 parameter. Remove it.
7264 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
7266 commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
7267 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
7268 Date: Wed Oct 17 11:13:51 2007 +0200
7270 add ft_cpu_setup(..) on mpc8260
7272 Add ft_cpu_setup(..)-function to adapt it for use with libfdt
7273 based on code from mpc5xxx
7275 Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
7278 commit 6abd82e19ae93c0b4d104e50165e235915ec0875
7279 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
7280 Date: Wed Oct 17 11:18:42 2007 +0200
7282 changes for IDS8247 board support
7284 To get the IDS8247 board working following are done:
7285 - FCC2 is deactivated
7288 - CFI driver is activated
7289 - Adapted for use with LIBFDT
7291 Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
7294 commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
7295 Author: Stefan Roese <sr@denx.de>
7296 Date: Sat Nov 3 12:08:28 2007 +0100
7298 ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
7300 This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
7301 Again, only one image supports both targets.
7303 Signed-off-by: Stefan Roese <sr@denx.de>
7305 commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
7306 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
7307 Date: Wed Oct 24 15:48:37 2007 +0200
7309 ATSTK1002: Remove default ethernet addresses
7311 Wolfgang is right: It's not a good idea to set up default initial
7312 ethernet addresses for a board, even though they belong to the local
7315 This will change the failure mode from "IT manager screams at you for
7316 using duplicate ethernet addresses" to a nice error message explaining
7317 that the ethernet address hasn't been set properly.
7319 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
7321 commit e5c794e491a57d829b6d8733e2ed8368a2269abf
7322 Author: Justin Flammia <jflammia@savantav.com>
7323 Date: Mon Oct 29 17:40:35 2007 -0400
7327 This is a multi-part message in MIME format.
7329 commit e6e505eae94ed721e123e177489291fc4544b7b8
7330 Author: Justin Flammia <jflammia@savantav.com>
7331 Date: Mon Oct 29 17:19:03 2007 -0400
7333 Found a bug in the way the DHCP Request packet is built, where the IP address
7334 that is offered by the server is bound to prematurely. This patch is a fix of
7335 that bug where the IP address offered by the DHCP server is not used until
7336 after the DHCP ACK from the server is received.
7338 Signed-off-by: Justin Flammia <jflammia@savantav.com>
7339 Signed-off-by: Ben Warren <bwarren@qstreams.com>
7341 commit 5d96d40d3f36da33348e68f9ea993f383e11f997
7342 Author: Stefan Roese <sr@denx.de>
7343 Date: Wed Oct 31 20:58:34 2007 +0100
7345 ppc4xx: Fix acadia_nand build problem
7347 Since the cache handling functions were moved from start.S into cache.S
7348 the acadia NAND booting Makfile needs to be adapted accordingly.
7350 Signed-off-by: Stefan Roese <sr@denx.de>
7352 commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
7353 Author: Stefan Roese <sr@denx.de>
7354 Date: Wed Oct 31 20:57:11 2007 +0100
7356 ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
7358 This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
7359 and to the Sequoia TLB init code. Now the cache can be enabled on 44x
7360 boards by defining CONFIG_4xx_DCACHE in the board config file. This
7361 option will disappear, when more boards use is successfully and no
7362 more known problems exist.
7364 This is tested successfully on Sequoia and Katmai. The only problem that
7365 needs to be fixed is, that USB is not working on Sequoia right now, since
7366 it will need some cache handling code too, similar to the 4xx EMAC driver.
7368 Signed-off-by: Stefan Roese <sr@denx.de>
7370 commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
7371 Author: Stefan Roese <sr@denx.de>
7372 Date: Wed Oct 31 20:51:10 2007 +0100
7374 ppc4xx: Enable CPU POST test for 4xx with dcache enabled
7376 Now with caches enabled (i- and d-cache) on 44x, we need a chance to
7377 disable the cache for the CPU POST tests, since these tests consist
7378 of self modifying code. This is done via the new change_tlb() function.
7380 Signed-off-by: Stefan Roese <sr@denx.de>
7382 commit f71b2888b4b3c870909a0341427b2a914246f81f
7383 Author: Stefan Roese <sr@denx.de>
7384 Date: Wed Oct 31 20:47:26 2007 +0100
7386 ppc4xx: Change 4xx POST ethernet test to handle cached memory too
7388 This patch enables the 4xx EMAC POST driver to work too, when dcache is
7391 Signed-off-by: Stefan Roese <sr@denx.de>
7393 commit a2685904061b35a17583d65fe47cdc2686a69eaa
7394 Author: Stefan Roese <sr@denx.de>
7395 Date: Wed Oct 31 20:45:53 2007 +0100
7397 ppc4xx: Remove temporary TLB entry in POST cache test only for 440
7399 Signed-off-by: Stefan Roese <sr@denx.de>
7401 commit ff768cb168d8157c24a25016dbfbeb465e47f420
7402 Author: Stefan Roese <sr@denx.de>
7403 Date: Wed Oct 31 18:01:24 2007 +0100
7405 ppc4xx: Change 4xx ethernet driver to handle cached memory too
7407 This patch enables the 4xx EMAC driver to work too, when dcache is
7410 Signed-off-by: Stefan Roese <sr@denx.de>
7412 commit 483e09a223c666269ef81d3573a6591b1046b0ef
7413 Author: Stefan Roese <sr@denx.de>
7414 Date: Wed Oct 31 17:59:22 2007 +0100
7416 ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
7418 This function is used to either turn cache on or off in a specific
7421 Signed-off-by: Stefan Roese <sr@denx.de>
7423 commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
7424 Author: Stefan Roese <sr@denx.de>
7425 Date: Wed Oct 31 17:57:52 2007 +0100
7427 ppc4xx: Remove cache definition from 4xx board config files
7429 All 4xx board config files don't need the cache definitions anymore.
7430 These are now defined in common headers.
7432 Signed-off-by: Stefan Roese <sr@denx.de>
7434 commit 9b94ac61d2176185c30adf0793e079ec30e68687
7435 Author: Stefan Roese <sr@denx.de>
7436 Date: Wed Oct 31 17:55:58 2007 +0100
7438 ppc4xx: Rework 4xx cache support
7440 New cache handling functions added and all existing functions
7441 moved from start.S into seperate cache.S.
7443 Signed-off-by: Stefan Roese <sr@denx.de>
7445 commit 06713773da4ac3d390c63d82641eb553224b27c2
7446 Author: Stefan Roese <sr@denx.de>
7447 Date: Tue Oct 23 18:03:12 2007 +0200
7449 ppc4xx: Remove compiler warning from previous commit
7451 Signed-off-by: Stefan Roese <sr@denx.de>
7453 commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
7454 Author: Stefan Roese <sr@denx.de>
7455 Date: Tue Oct 23 14:40:30 2007 +0200
7457 ppc4xx: Remove temporary TLB entry in POST cache test
7459 Signed-off-by: Stefan Roese <sr@denx.de>
7461 commit 1338e6a81834099ba19733b69aafd8ef5f098094
7462 Author: Stefan Roese <sr@denx.de>
7463 Date: Tue Oct 23 14:05:08 2007 +0200
7465 ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
7467 I lately noticed, that newer 4xx board with GBit support sometimes don't
7468 finish link autonegotiation in 4 seconds. Changing this timeout to 5
7469 seconds seems fine here.
7471 Signed-off-by: Stefan Roese <sr@denx.de>
7473 commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
7474 Author: Stefan Roese <sr@denx.de>
7475 Date: Tue Oct 23 14:03:17 2007 +0200
7477 ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
7479 This patch changes all in32/out32 calls to use the recommended in_be32/
7480 out_be32 macros instead.
7482 Signed-off-by: Stefan Roese <sr@denx.de>
7484 commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
7485 Author: Stefan Roese <sr@denx.de>
7486 Date: Thu Oct 25 12:24:59 2007 +0200
7488 ppc4xx: Fix POST ethernet test for Haleakala
7490 The POST ethernet test needed to be changed to dynamically determine
7491 the count of ethernet devices. This code is cloned from the 4xx
7494 Signed-off-by: Stefan Roese <sr@denx.de>
7496 commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
7497 Author: Stefan Roese <sr@denx.de>
7498 Date: Tue Oct 23 11:31:05 2007 +0200
7500 ppc4xx: Correct UART input clock calculation and passing to fdt
7502 We now use a value in the gd (global data) structure for the UART input
7503 frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
7506 Signed-off-by: Stefan Roese <sr@denx.de>
7508 commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
7509 Author: Stefan Roese <sr@denx.de>
7510 Date: Tue Oct 23 10:10:08 2007 +0200
7512 ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
7514 The Haleakala is nearly identical with the Kilauea eval board. The only
7515 difference is that the 405EXr only supports one EMAC and one PCIe
7516 interface. This patch adds support for the Haleakala board by using
7517 the identical image for Kilauea and Haleakala. The distinction is done
7518 by comparing the PVR.
7520 Signed-off-by: Stefan Roese <sr@denx.de>
7522 commit 9f798766aa85e62eb8fa8c721e148df609b78137
7523 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
7524 Date: Tue Oct 23 08:29:10 2007 +0200
7526 ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
7528 This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
7531 As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
7532 DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
7533 modules are still plugged in. So it is recommended to remove the DIMM
7534 modules while using the NAND booting code with the fixed SDRAM setup!
7536 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
7537 Signed-off-by: Stefan Roese <sr@denx.de>
7539 commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
7540 Author: Stefan Roese <sr@denx.de>
7541 Date: Mon Oct 22 16:24:44 2007 +0200
7543 ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
7545 Signed-off-by: Stefan Roese <sr@denx.de>
7547 commit 3248f63ad89cb031491edb7016587fe6e9a238b9
7548 Author: Stefan Roese <sr@denx.de>
7549 Date: Mon Oct 22 16:22:40 2007 +0200
7551 ppc4xx: Rework of 4xx serial driver (4)
7555 - Use in_8/out_8 macros instead of in8/out8
7556 - No need for UART_BASE marco anymore, now really handled via function
7558 - serial_init_common() introduced
7559 - Further coding style cleanup
7561 Signed-off-by: Stefan Roese <sr@denx.de>
7563 commit e61cb8163a66b8a135696ae232e2bead1ce0a049
7564 Author: Stefan Roese <sr@denx.de>
7565 Date: Mon Oct 22 15:45:49 2007 +0200
7567 ppc4xx: Rework of 4xx serial driver (3)
7569 Change all linker scripts to reference the changed driver name iop480_uart.o.
7571 Signed-off-by: Stefan Roese <sr@denx.de>
7573 commit 882ae41274921f9016131806bdeb27e19606f47a
7574 Author: Stefan Roese <sr@denx.de>
7575 Date: Mon Oct 22 15:44:39 2007 +0200
7577 ppc4xx: Rework of 4xx serial driver (2)
7579 Change all linker scripts to reference the changed driver name 4xx_uart.o.
7581 Note: In most cased all these explicit referencing of these object files
7582 in the linker scripts is not neccessary. Only for manually embedded
7583 environment into the U-Boot image, which is not done is most cases.
7585 Signed-off-by: Stefan Roese <sr@denx.de>
7587 commit ad31e40bed042cb670d0036fea96435007afb838
7588 Author: Stefan Roese <sr@denx.de>
7589 Date: Mon Oct 22 15:09:59 2007 +0200
7591 ppc4xx: Rework of 4xx serial driver (1)
7593 This patch starts the rework of the PPC4xx serial driver. First we split
7594 the file into two seperate files, one 4xx_uart.c with the 405/440 UART
7595 handling code and the other one iop480_uart.c with the UART code for the
7596 PLX-Tech IOP480 PPC (PPC403 based).
7598 Signed-off-by: Stefan Roese <sr@denx.de>
7600 commit 764e7417ee5f6e25b1715720e7d7dd3487109385
7601 Author: Stefan Roese <sr@denx.de>
7602 Date: Mon Oct 22 10:30:38 2007 +0200
7604 ppc4xx: Correct UART input clock calculation and passing to fdt
7606 Signed-off-by: Stefan Roese <sr@denx.de>
7608 commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
7609 Author: Stefan Roese <sr@denx.de>
7610 Date: Mon Oct 22 07:34:34 2007 +0200
7612 ppc4xx: Add initial AMCC Makalu 405EX support
7614 Signed-off-by: Stefan Roese <sr@denx.de>
7616 commit fa8aea20456e6f1dba43f46bcc72024dd9499998
7617 Author: Stefan Roese <sr@denx.de>
7618 Date: Mon Oct 22 07:33:52 2007 +0200
7620 ppc4xx: Add freqUART to CPU speed detection
7622 This value is needed later for the device tree configuration of
7625 Signed-off-by: Stefan Roese <sr@denx.de>
7627 commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
7628 Author: Stefan Roese <sr@denx.de>
7629 Date: Sun Oct 21 14:26:29 2007 +0200
7631 ppc: Small Kilauea cleanup of config file
7633 Signed-off-by: Stefan Roese <sr@denx.de>
7635 commit 758c037aeead34b49631b8da3a90b1bba14c0410
7636 Author: Stefan Roese <sr@denx.de>
7637 Date: Sun Oct 21 08:16:12 2007 +0200
7639 rtc: Add Xicor/Intersil X1205 RTC support
7641 This patch adds support for the Xicor/Intersil X1205 RTC used on the
7642 AMCC Makalu eval board. This driver is basically cloned from the Linux
7643 driver version (2.6.23).
7645 This patch also introduces the Linux bcd.h header for the BCD2BIN/
7646 BIN2BCD conversions. In the future some of the other U-Boot RTC driver
7647 should be converted to also use this header instead of implementing
7648 their own local copy of these functions/macros.
7650 Signed-off-by: Stefan Roese <sr@denx.de>
7652 commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
7653 Author: Stefan Roese <sr@denx.de>
7654 Date: Sun Oct 21 08:12:41 2007 +0200
7656 ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
7658 This patch moves some common 4xx macros and the PPC405_SYS_INFO/
7659 PPC440_SYS_INFO structure into the common ppc4xx.h header.
7661 Lot's of other macros are good candidates to be consolidated this way
7664 Signed-off-by: Stefan Roese <sr@denx.de>
7666 commit 770c7af5800f598d22730d1f4b70f16c9b33512e
7667 Author: Stefan Roese <sr@denx.de>
7668 Date: Sun Oct 21 08:05:18 2007 +0200
7670 ppc4xx: Fix size setup in Kilauea DDR2 init routine
7672 The size was initilized wrong. Instead of 256MB, the DDR2 controller
7673 was setup to 512MB. Now the correct values is used.
7675 This patch also does a little cleanup and adds a comment here.
7677 Signed-off-by: Stefan Roese <sr@denx.de>
7679 commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
7680 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
7681 Date: Thu Oct 18 17:29:04 2007 +0200
7683 ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
7685 CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
7686 number is used to access system registers.
7688 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
7689 Signed-off-by: Stefan Roese <sr@denx.de>
7691 commit c36c68160333ac5fe41ec3db12a728b7075b3912
7692 Author: Stefan Roese <sr@denx.de>
7693 Date: Thu Oct 18 07:42:27 2007 +0200
7695 ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
7697 On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
7698 is the internal SRAM. Since I now ported and tested this endpoint mode
7699 on Kilauea successfully to map to 0 (SDRAM), I also changed this for
7702 Yucca will stay at internal SRAM for now. Not sure if somebody relies on
7705 Signed-off-by: Stefan Roese <sr@denx.de>
7707 commit 5cb4af4791f61843432155142b6cfac901f66c10
7708 Author: Stefan Roese <sr@denx.de>
7709 Date: Thu Oct 18 07:39:38 2007 +0200
7711 ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
7713 This patch adds endpoint support for the AMCC Kilauea eval board. It can
7714 be tested by connecting a reworked PCIe cable (only 1x lane singles
7715 connected) to another root-complex.
7717 In this test setup, a 64MB inbound window is configured at BAR0 which maps
7718 to 0 on the PLB side. So accessing this BAR0 from the root-complex will
7719 access the first 64MB of the SDRAM on the PPC side.
7721 Signed-off-by: Stefan Roese <sr@denx.de>
7723 commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
7724 Author: Stefan Roese <sr@denx.de>
7725 Date: Sat Oct 13 16:43:23 2007 +0200
7727 ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
7729 This patch adds support for dynamic configuration of PCIe ports for the
7730 AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
7731 boards Yucca & Katmai and the 405EX board Kilauea.
7733 This dynamic configuration is done via the "pcie_mode" environement
7734 variable. This variable can be set to "EP" or "RP" for endpoint or
7735 rootpoint mode. Multiple values can be joined via the ":" delimiter.
7740 This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
7743 Per default Yucca will be configured as:
7746 Per default Katmai will be configured as:
7749 Per default Kilauea will be configured as:
7752 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
7753 Signed-off-by: Stefan Roese <sr@denx.de>
7755 commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
7756 Author: Stefan Roese <sr@denx.de>
7757 Date: Thu Oct 11 11:15:59 2007 +0200
7759 ppc4xx: Enable device tree support (fdt) on Kilauea per default
7761 This patch enables the fdt support on the AMCC Kilauea eval board.
7762 Additionally now EBC ranges fdt fixup is included to support NOR
7763 FLASH mapping via the Linux physmap_of driver.
7765 This Kilauea port now support booting arch/ppc and arch/powerpc
7766 Linux kernels. The default environment "net_nfs" is for arch/ppc
7767 and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
7768 support will be removed.
7770 Signed-off-by: Stefan Roese <sr@denx.de>
7772 commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
7773 Author: Stefan Roese <sr@denx.de>
7774 Date: Thu Oct 11 11:11:45 2007 +0200
7776 ppc4xx: Add additional debug info to 4xx fdt support
7778 Signed-off-by: Stefan Roese <sr@denx.de>
7780 commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
7781 Author: Stefan Roese <sr@denx.de>
7782 Date: Fri Oct 5 21:28:58 2007 +0200
7784 ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
7786 Signed-off-by: Stefan Roese <sr@denx.de>
7788 commit 1941cce71b1ae975602854045061e82f94ecd012
7789 Author: Stefan Roese <sr@denx.de>
7790 Date: Fri Oct 5 17:35:10 2007 +0200
7792 ppc4xx: Fix small merge problem in 4xx_enet.c
7794 Signed-off-by: Stefan Roese <sr@denx.de>
7796 commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
7797 Author: Stefan Roese <sr@denx.de>
7798 Date: Fri Oct 5 17:11:30 2007 +0200
7800 ppc4xx: Add initial AMCC Kilauea 405EX support
7802 Signed-off-by: Stefan Roese <sr@denx.de>
7804 commit dbbd125721aea6645fdb962f36bd41f59e272f9d
7805 Author: Stefan Roese <sr@denx.de>
7806 Date: Fri Oct 5 17:10:59 2007 +0200
7808 ppc4xx: Add PPC405EX support
7810 Signed-off-by: Stefan Roese <sr@denx.de>
7812 commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
7813 Author: Stefan Roese <sr@denx.de>
7814 Date: Fri Oct 5 17:09:36 2007 +0200
7816 ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
7818 Signed-off-by: Stefan Roese <sr@denx.de>
7820 commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
7821 Author: Stefan Roese <sr@denx.de>
7822 Date: Fri Oct 5 17:07:50 2007 +0200
7824 ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
7826 Signed-off-by: Stefan Roese <sr@denx.de>
7828 commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
7829 Author: Stefan Roese <sr@denx.de>
7830 Date: Fri Oct 5 17:04:57 2007 +0200
7832 POST: Add 405EX support to 4xx UART POST test
7834 Signed-off-by: Stefan Roese <sr@denx.de>
7836 commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
7837 Author: Stefan Roese <sr@denx.de>
7838 Date: Fri Oct 5 15:10:02 2007 +0200
7840 DTT: Prepare DS1775 driver for use of different I2C addresses
7842 Signed-off-by: Stefan Roese <sr@denx.de>
7844 commit 19e93b1e16d267220440d827b920fbad8abfa70f
7845 Author: Stefan Roese <sr@denx.de>
7846 Date: Fri Oct 5 14:23:43 2007 +0200
7848 ppc4xx: 4xx_pcie: Change PCIe status output to match common style
7850 Signed-off-by: Stefan Roese <sr@denx.de>
7852 commit ff68f66bcb0da847845aa2fac11eba6c25938c99
7853 Author: Stefan Roese <sr@denx.de>
7854 Date: Fri Oct 5 09:22:33 2007 +0200
7856 ppc4xx: 4xx_pcie: Disable debug output as default
7858 Signed-off-by: Stefan Roese <sr@denx.de>
7860 commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
7861 Author: Stefan Roese <sr@denx.de>
7862 Date: Fri Oct 5 09:18:23 2007 +0200
7864 ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
7866 Signed-off-by: Stefan Roese <sr@denx.de>
7868 commit 4dbee8a90df613eb517aadbecebd70f168913d30
7869 Author: Stefan Roese <sr@denx.de>
7870 Date: Fri Oct 5 07:57:20 2007 +0200
7872 ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
7874 128MB seems to be the smallest possible value for the memory size
7875 for on PCIe port. With this change now the BAR's of the PCIe cards
7876 are accessible under U-Boot.
7878 One big note: This only works for PCIe port 0 & 1. For port 2 this
7879 currently doesn't work, since the base address is now 0xc0000000
7880 (0xb0000000 + 2 * 0x08000000), and this is already occupied by
7881 CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
7882 to change the base addresses completely and this change would have
7883 too much impact right now.
7885 This patch adds debug output to the 4xx pcie driver too.
7887 Signed-off-by: Stefan Roese <sr@denx.de>
7889 commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
7890 Author: Stefan Roese <sr@denx.de>
7891 Date: Wed Oct 3 21:16:32 2007 +0200
7893 ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
7895 Signed-off-by: Stefan Roese <sr@denx.de>
7897 commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
7898 Author: Stefan Roese <sr@denx.de>
7899 Date: Wed Oct 3 15:01:02 2007 +0200
7901 ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
7903 These files were introduced with the IBM 405GP but are currently used on all
7904 4xx PPC platforms. So the name doesn't match the content anymore. This patch
7905 renames the files to 4xx_pci.c/h.
7907 Signed-off-by: Stefan Roese <sr@denx.de>
7909 commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
7910 Author: Stefan Roese <sr@denx.de>
7911 Date: Wed Oct 3 14:14:58 2007 +0200
7913 ppc4xx: Add a comment for 405EX PCIe endpoint configuration
7915 Signed-off-by: Stefan Roese <sr@denx.de>
7917 commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
7918 Author: Stefan Roese <sr@denx.de>
7919 Date: Wed Oct 3 10:38:09 2007 +0200
7921 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
7923 (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
7924 the SDR registers of the PCIe ports. This makes the overall design
7925 clearer, since it removed a lot of switch statements which are not
7928 Also, the functions ppc4xx_init_pcie_rootport() and
7929 ppc4xx_init_pcie_entport() are merged into a single function
7930 ppc4xx_init_pcie_port(), since most of the code was duplicated.
7931 This makes maintainance and porting to other 4xx platforms
7934 Signed-off-by: Stefan Roese <sr@denx.de>
7936 commit 026f71106871f31d17d0ea0db9a7547ff92934bc
7937 Author: Stefan Roese <sr@denx.de>
7938 Date: Wed Oct 3 07:48:09 2007 +0200
7940 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
7942 This patch is the first patch of a series to make the 440SPe PCIe code
7943 usable on different 4xx PPC platforms. In preperation for the new 405EX
7944 which is also equipped with PCIe interfaces.
7946 (2) This patch renames the functions from 440spe_ to 4xx_ with a
7947 little additional cleanup
7949 Signed-off-by: Stefan Roese <sr@denx.de>
7951 commit c7c6da23028f146d912514b95aefa3da7cf37699
7952 Author: Stefan Roese <sr@denx.de>
7953 Date: Wed Oct 3 07:34:10 2007 +0200
7955 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
7957 This patch is the first patch of a series to make the 440SPe PCIe code
7958 usable on different 4xx PPC platforms. In preperation for the new 405EX
7959 which is also equipped with PCIe interfaces.
7961 (1) This patch renames the files from 440spe_pcie to 4xx_pcie
7963 Signed-off-by: Stefan Roese <sr@denx.de>
7965 commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
7966 Author: Marian Balakowicz <m8@semihalf.com>
7967 Date: Wed Oct 24 01:37:36 2007 +0200
7969 TQM5200: Call usb_cpu_init() during board init
7971 usb_cpu_init() configures GPS USB pins, clocks, etc. and
7972 is required for proper operation of kernel USB subsystem.
7973 This setup was previously done in the kernel by the fixup
7974 code which is being removed, thus low level init must be
7977 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7978 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
7980 commit b5af773f8d92677e06f3295b45557c9d0a487c24
7981 Author: Zhang Wei <wei.zhang@freescale.com>
7982 Date: Thu Oct 25 17:51:27 2007 +0800
7984 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
7986 The scan code of the key 'z' is 0x1d, which should be handled.
7988 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
7991 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
7992 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
7994 commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
7995 Author: Rodolfo Giometti <giometti@enneenne.com>
7996 Date: Mon Oct 15 11:59:17 2007 +0200
7998 PXA USB OHCI: "usb stop" implementation.
8000 Some USB keys need to be switched off before loading the kernel
8001 otherwise they can remain in an undefined status which prevents them
8002 to be correctly recognized by the kernel.
8004 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
8005 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
8007 commit 31548249decf18a6b877a18436b6139dd483fe4a
8008 Author: Justin Flammia <jflammia@savantav.com>
8009 Date: Mon Oct 29 17:40:35 2007 -0400
8013 This is a multi-part message in MIME format.
8015 commit e6e505eae94ed721e123e177489291fc4544b7b8
8016 Author: Justin Flammia <jflammia@savantav.com>
8017 Date: Mon Oct 29 17:19:03 2007 -0400
8019 Found a bug in the way the DHCP Request packet is built, where the IP address
8020 that is offered by the server is bound to prematurely. This patch is a fix of
8021 that bug where the IP address offered by the DHCP server is not used until
8022 after the DHCP ACK from the server is received.
8024 Signed-off-by: Justin Flammia <jflammia@savantav.com>
8025 Signed-off-by: Ben Warren <bwarren@qstreams.com>
8027 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
8028 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8029 Date: Thu Oct 25 17:16:22 2007 -0500
8031 ColdFire 54455: Fix correct boot location for atmel and intel
8033 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8035 commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
8036 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8037 Date: Thu Oct 25 17:14:00 2007 -0500
8039 ColdFire: Fix build error when CONFIG_WATCHDOG is defined
8041 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8043 commit c67e12e705b204cfe914e3e3e693d69a445dcabf
8044 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8045 Date: Thu Oct 25 17:12:36 2007 -0500
8047 ColdFire 5329: Assign correct SDRAM size and fix cache
8049 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8051 commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
8052 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8053 Date: Thu Oct 25 17:10:23 2007 -0500
8055 ColdFire 5253: Assign correct SDRAM size
8057 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8059 commit 2acefa72ee0026f862ab65597ca687428f63a973
8060 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8061 Date: Thu Oct 25 17:09:17 2007 -0500
8063 ColdFire 5282: Fix external flash boot and return dramsize
8065 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8067 commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
8068 Author: Bartlomiej Sieka <tur@semihalf.com>
8069 Date: Thu Oct 25 17:20:01 2007 +0200
8071 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
8073 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
8075 commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
8076 Author: Martin Krause <martin.krause@tqs.de>
8077 Date: Wed Oct 24 08:42:25 2007 +0200
8079 TQM5200: fix spurious characters on second serial interface
8081 With this patch PSC3 is configured as UART. This is done, because if
8082 the pins of PSC3 are not configured at all (-> all pins are GPI),
8083 due to crosstalk, spurious characters may be send over the RX232_2_TXD
8086 Signed-off-by: Martin Krause <martin.krause@tqs.de>
8087 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
8089 commit be4a87f11e297a5cededbf7dd71c0248f3874acd
8090 Author: Martin Krause <martin.krause@tqs.de>
8091 Date: Wed Oct 24 08:41:27 2007 +0200
8093 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
8095 Some commands for the STK52xx base board try to access the SM501 grafic
8096 controller. But the TQM5200S has no grafic controller (only the TQM5200
8097 and the TQM5200B have). This patch deactivates the commands accessing
8098 the SM501 for the TQM5200S.
8100 Signed-off-by: Martin Krause <martin.krause@tqs.de>
8101 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
8103 commit b31f64343ead9482cd439b1adbe4c34026a641b1
8104 Author: Martin Krause <martin.krause@tqs.de>
8105 Date: Mon Oct 22 16:45:53 2007 +0200
8107 TQM5200: fix spurious characters on second serial interface
8109 With this patch PSC3 is configured as UART. This is done, because if
8110 the pins of PSC3 are not configured at all (-> all pins are GPI),
8111 due to crosstalk, spurious characters may be send over the RX232_2_TXD
8114 Signed-off-by: Martin Krause <martin.krause@tqs.de>
8116 commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
8117 Author: Martin Krause <martin.krause@tqs.de>
8118 Date: Mon Oct 22 16:40:06 2007 +0200
8120 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
8122 Some commands for the STK52xx base board try to access the SM501 grafic
8123 controller. But the TQM5200S has no grafic controller (only the TQM5200
8124 and the TQM5200B have). This patch deactivates the commands accessing
8125 the SM501 for the TQM5200S.
8127 Signed-off-by: Martin Krause <martin.krause@tqs.de>
8129 commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
8130 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8131 Date: Sun Oct 21 09:14:28 2007 +0200
8133 Mips: Fix string functions differ prototype declaration
8135 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8137 commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
8138 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
8139 Date: Fri Oct 19 17:51:40 2007 -0500
8141 fsl_pci_init enable COMMAND_MEMORY if inbound window
8143 Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
8144 to pciauto_setup_device has the side effect of not getting
8147 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
8149 commit e9d0d527992566ebef9826962ff1745b2f082b92
8150 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8151 Date: Fri Oct 19 10:55:24 2007 +0200
8153 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
8155 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8157 commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
8158 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8159 Date: Fri Oct 19 08:10:15 2007 +0200
8161 fix warning: no return statement in function returning non-void
8163 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8165 commit e78220f6e514206757acfe247297fc9a328a881f
8166 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8167 Date: Fri Oct 19 06:33:45 2007 +0200
8169 xsengine: Fix no partition type specified, use DOS as default
8171 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8173 commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
8174 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8175 Date: Fri Oct 19 00:24:59 2007 +0200
8177 lubbock: Fix no partition type specified, use DOS as default
8179 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8181 commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
8182 Author: Wolfgang Denk <wd@denx.de>
8183 Date: Tue Oct 23 16:50:03 2007 +0200
8185 Coding style: keep lists sorted; update CHANGELOG
8187 Signed-off-by: Wolfgang Denk <wd@denx.de>
8189 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
8190 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8191 Date: Fri Oct 19 00:09:05 2007 +0200
8193 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
8195 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8197 commit 96455bfebc9887837095c9051d216f53c61b5f10
8198 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8199 Date: Fri Oct 19 00:07:39 2007 +0200
8201 Fix warning differ in signedness in board/innokom/innokom.c
8203 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8205 commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
8206 Author: Marcel Ziswiler <marcel@ziswiler.com>
8207 Date: Fri Oct 19 00:25:33 2007 +0200
8209 fix pxa255_idp board
8211 The pxa255_idp being an old unmaintained board showed several issues:
8212 1. CONFIG_INIT_CRITICAL was still defined.
8213 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
8214 3. Symbol flash_addr was undeclared.
8215 4. The boards lowlevel_init function was still called memsetup.
8216 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
8217 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
8218 'target CPU does not support interworking' warnings on recent compilers.
8219 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
8220 indexes rather than the register definitions from the pxa-regs header
8221 file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
8222 avoid any ambiguities.
8223 8. There were several redefinition warnings concerning ICMR, OSMR3,
8224 OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
8225 9. The board configuration file was rather outdated.
8226 10. The part header file defined the vendor, product and revision arrays
8227 as unsigned chars instead of just chars in the block_dev_desc_t
8230 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
8232 commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
8233 Author: Rune Torgersen <runet@innovsys.com>
8234 Date: Wed Oct 17 11:56:31 2007 -0500
8236 Make MPC8266ADS command selection more robust
8238 Fix MPC8266 command line definition so it won't break when new commands
8239 are added to u-boot.
8240 Signed-off-by Rune Torgersen <runet@innovsys.com>
8242 commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
8243 Author: Bartlomiej Sieka <tur@semihalf.com>
8244 Date: Tue Oct 23 13:14:10 2007 +0200
8246 Motion-PRO: Update configuration to accomodate next generation board.
8248 New board has faster oscillator and a different Flash chip. This affects:
8251 - Flash CS configuration (timings)
8252 - Flash sector size, and thus MTD partition layout
8253 - malloc() arena size (due to bigger Flash sectors)
8254 - smaller memory test range (due to bigger malloc() arena)
8256 This patch also enables more extensive memory testing via "mtest".
8258 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
8260 commit eff501904df2bf1724a750062628ba2c51dbb1f8
8261 Author: Bartlomiej Sieka <tur@semihalf.com>
8262 Date: Tue Oct 23 11:36:07 2007 +0200
8264 Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
8266 Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
8267 register must be written a value of 0x00000004 as the first step of the
8268 SDRAM contorller configuration.
8270 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
8272 commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
8273 Author: Peter Pearse <peter.pearse@arm.com>
8274 Date: Tue Oct 23 10:22:16 2007 +0100
8276 Move PL01* serial drivers to drivers/serial and adjust Makefiles.
8278 commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
8279 Author: Stefan Roese <sr@denx.de>
8280 Date: Tue Oct 23 10:17:42 2007 +0200
8282 ppc4xx: lwmon5: Some further GPIO config changes
8284 Signed-off-by: Stefan Roese <sr@denx.de>
8286 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
8287 Author: Vlad Lungu <vlad@comsys.ro>
8288 Date: Sun Oct 21 22:10:10 2007 +0900
8290 [MIPS] Fix UNCACHED_SDRAM
8292 PHYSADDR is for physical address, KSEG1ADDR is for uncached.
8294 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
8295 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
8297 commit 00101dd7a32d12f698150123e47e4b3420279f86
8298 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
8299 Date: Sun Oct 21 21:30:42 2007 +0900
8301 [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
8303 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
8305 commit eb700636db017d310edaeb559b13d82588560674
8306 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
8307 Date: Sun Oct 21 10:55:37 2007 +0900
8309 [MIPS] u-boot.lds: Define _gp in a standard manner
8311 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
8313 commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
8314 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
8315 Date: Sun Oct 21 10:55:36 2007 +0900
8317 [MIPS] Fix $gp usage
8319 Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
8320 As a general principle, we should use _gp for $gp.
8322 Thanks to linker script's help we fortunately have _gp which equals to
8323 _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
8324 be able to access to GOT entires, global variables and procedure entry
8325 points. The right thing to do is to use _gp.
8327 This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
8328 which holds the offset from _gp. When updating GOT entries, we use this
8329 offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
8331 This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
8332 I made some change to leave over num_got_entries.
8334 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
8335 Cc: Vlad Lungu <vlad@comsys.ro>
8337 commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
8338 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
8339 Date: Sun Oct 21 10:55:36 2007 +0900
8341 [MIPS] u-boot.lds: Fix __got_start and __got_end
8343 Ensure that __got_start points to top of the `.got', and __got_end points
8344 to bottom as well, so that we never fail to count num_got_entries.
8346 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
8348 commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
8349 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
8350 Date: Sun Oct 21 10:55:36 2007 +0900
8352 [MIPS] u-boot.lds: Remove duplicated .sdata section
8354 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
8356 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
8357 Author: Wolfgang Denk <wd@denx.de>
8358 Date: Sun Oct 21 01:01:17 2007 +0200
8360 Minor coding style cleanup; update CHANGELOG
8362 Signed-off-by: Wolfgang Denk <wd@denx.de>
8364 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
8365 Author: Vlad Lungu <vlad@comsys.ro>
8366 Date: Thu Oct 4 20:47:10 2007 +0300
8370 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
8371 to do anything in eth_stop() if eth_init() was not called.
8372 Simplified RX path in order to avoid timeouts on really really
8373 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
8374 clever enough to cope with 1 packet per eth_rx().
8376 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
8378 commit df90968b48fb34fa9072fab150db2ac89678f537
8379 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
8380 Date: Mon Sep 24 13:32:13 2007 -0400
8382 Setting MSR[DE] in do_reset
8385 This patch ensures the soft reset of the board for the 85xx boards
8386 by setting the MSR[DE] in the do_reset function.
8388 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
8390 commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
8391 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
8392 Date: Mon Sep 24 13:36:01 2007 -0400
8397 This patch fixes the MSR overwrite in the start.S when moving out of
8400 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
8402 commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
8403 Author: Dan Wilson <dwilson@fulcrummicro.com>
8404 Date: Fri Oct 19 11:33:48 2007 -0500
8406 tsec driver should clear RHALT on startup
8408 This was causing problems for some people.
8410 Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
8411 Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
8412 Signed-off-by: Andy Fleming <afleming@freescale.com>
8414 commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
8415 Author: Kumar Gala <galak@kernel.crashing.org>
8416 Date: Thu Oct 11 00:29:18 2007 -0500
8418 Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
8420 On the MPC85xx CDS we have two issues:
8422 1. The device tree fixup code did not check to see if the property we are
8423 trying to update is actually found. Its possible that it would update
8424 random memory starting at 0.
8426 2. Newer Linux kernel's have moved the location of the PCI nodes to be
8427 sibilings of the soc node and not children. The explicit PATH to the PCI
8428 node would not be found for these device trees. Add the ability to handle
8429 both paths. In the future we shouldn't handle such fixups by explicit path.
8431 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8433 commit a3063eec775719b7e91023bbec3f64b3118791df
8434 Author: Kumar Gala <galak@kernel.crashing.org>
8435 Date: Thu Oct 11 00:18:48 2007 -0500
8437 Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
8439 On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
8440 console. Make it so we match that config what we tell Linux as the early
8443 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8445 commit e1ce3cb617bb06f91f82f98915391175addf3e82
8446 Author: Kumar Gala <galak@kernel.crashing.org>
8447 Date: Tue Oct 2 11:12:27 2007 -0500
8449 Remove magic numbers from cache related operations for mpc85xx
8451 The mpc85xx start code uses some magic numbers that we actually
8452 have #defines for in <config.h> so use those instead.
8454 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8456 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
8457 Author: Detlev Zundel <dzu@denx.de>
8458 Date: Fri Oct 19 16:47:26 2007 +0200
8462 Signed-off-by: Detlev Zundel <dzu@denx.de>
8464 commit 281df457c1aa50d2752165d0c5c3282d4027b974
8465 Author: Tony Li <tony.li@freescale.com>
8466 Date: Thu Oct 18 17:47:19 2007 +0800
8468 mpc83xx: Add configure entry for MPC83xx ATM support
8470 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
8473 Signed-off-by: Tony Li <tony.li@freescale.com>
8474 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8476 commit d2646554f529a9577515eceb0ec5eceee18244ba
8477 Author: Tony Li <tony.li@freescale.com>
8478 Date: Thu Oct 18 17:44:38 2007 +0800
8480 mpc83xx: pq-mds-pib.c typo error
8482 Correct to val8 from val.
8484 Signed-off-by: Tony Li <tony.li@freescale.com>
8485 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8487 commit 3e11ae80fec1ee12194940955431186abf6009c2
8488 Author: Stefan Roese <sr@denx.de>
8489 Date: Wed Oct 17 15:40:19 2007 +0200
8491 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
8493 Signed-off-by: Stefan Roese <sr@denx.de>
8495 commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
8496 Author: Jon Loeliger <jdl@freescale.com>
8497 Date: Tue Oct 16 15:27:43 2007 -0500
8499 Initial mpc8610hpcd Makefile files.
8501 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
8502 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
8503 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8504 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8506 commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
8507 Author: Jon Loeliger <jdl@freescale.com>
8508 Date: Tue Oct 16 15:26:51 2007 -0500
8510 Initial mpc8610hpcd cpu/, README and include/ files.
8512 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
8513 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
8514 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8515 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8517 commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
8518 Author: Jon Loeliger <jdl@freescale.com>
8519 Date: Tue Oct 16 13:54:01 2007 -0500
8521 Initial mpc8610hpcd board files.
8523 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
8524 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
8525 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8526 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8528 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
8529 Author: runet@innovsys.com <runet@innovsys.com>
8530 Date: Tue Oct 16 14:50:40 2007 -0500
8532 Make MPC8266ADS board compile again.
8534 Signed-off-by: Runet Torgersen <runet@innovsys.com>
8536 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
8537 Author: Jon Loeliger <jdl@freescale.com>
8538 Date: Mon Aug 27 12:41:03 2007 -0500
8540 86xx: Allow for fewer DDR slots per memory controller.
8542 As a direct correlation exists between DDR DIMM slots
8543 and SPD EEPROM addresses used to configure them, use
8544 the individually defined SPD_EEPROM_ADDRESS* values to
8545 determine if a DDR DIMM slot should have its SPD
8546 configuration read or not.
8548 Effectively, this now allows for 1 or 2 DIMM slots
8549 per memory controller.
8551 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8553 commit 4d4a945e189a2f384c66432316da2788a0ac1607
8554 Author: Rodolfo Giometti <giometti@enneenne.com>
8555 Date: Mon Oct 15 11:59:17 2007 +0200
8557 PXA USB OHCI: "usb stop" implementation.
8559 Some USB keys need to be switched off before loading the kernel
8560 otherwise they can remain in an undefined status which prevents them
8561 to be correctly recognized by the kernel.
8563 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
8565 commit e2e93442e558cf1500e92861f99713b2f045ea22
8566 Author: Stefan Roese <sr@denx.de>
8567 Date: Mon Oct 15 11:39:00 2007 +0200
8569 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
8571 The I2C bootstrap values that can be setup via the "bootstrap" command,
8572 were setup incorrect regarding the generation of the internal sync PCI
8573 clock. The values for PLB clock == 133MHz were slighly incorrect and the
8574 values for PLB clock == 166MHz were totally incorrect. This could
8575 lead to a hangup upon booting while PCI configuration scan.
8577 This patch fixes this issue and configures valid PCI divisor values
8578 for the sync PCI clock, with respect to the provided external async
8581 Here the values of the formula in the chapter 14.2 "PCI clocking"
8582 from the 440EPx users manual:
8584 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
8586 33MHz async PCI frequency:
8588 => 32 <= 44.3 <= 65 (div = 3)
8591 => 32 <= 55.3 <= 65 (div = 3)
8593 66MHz async PCI frequency:
8595 => 65 <= 66.5 <= 132 (div = 2)
8598 => 65 <= 83 <= 132 (div = 2)
8600 Signed-off-by: Stefan Roese <sr@denx.de>
8602 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
8603 Author: Stefan Roese <sr@denx.de>
8604 Date: Mon Oct 15 11:29:33 2007 +0200
8606 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
8608 The BCSR status bit for the 66MHz PCI operation was correctly
8609 addressed (MSB/LSB problem). Now the correct currently setup
8610 PCI frequency is displayed upon bootup.
8612 This patch also fixes this problem on Rainier & Yellowstone, since these
8613 boards use the same souce code as Sequoia & Yosemite do.
8615 Signed-off-by: Stefan Roese <sr@denx.de>
8617 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
8618 Author: Martin Krause <martin.krause@tqs.de>
8619 Date: Wed Sep 26 17:55:56 2007 +0200
8621 TQM860M: adjust for doubled flash sector size.
8623 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
8624 doubled sector size.
8626 Signed-off-by: Martin Krause <martin.krause@tqs.de>
8628 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
8629 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
8630 Date: Wed Sep 26 17:55:54 2007 +0200
8632 TQM8xx: Fix CAN timing.
8634 Signed-off-by: Martin Krause <martin.krause@tqs.de>
8636 commit d43e489baf02afae49077791fb22332d240d8656
8637 Author: Martin Krause <martin.krause@tqs.de>
8638 Date: Thu Sep 27 14:54:36 2007 +0200
8640 TQM866M: fix SDRAM refresh
8642 At 133 MHz the current SDRAM refresh rate is too fast
8643 (measured 4 * 1.17 us).
8644 CFG_MAMR_PTA changes from 39 to 97. This result
8645 in a refresh rate of 4 * 7.8 us at the default clock
8646 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
8647 This is a compromise until a new method is found to
8648 adjust the refresh rate.
8650 Signed-off-by: Martin Krause <martin.krause@tqs.de>
8652 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
8653 Author: Martin Krause <martin.krause@tqs.de>
8654 Date: Wed Sep 26 17:55:55 2007 +0200
8656 TQM866M: adjust for doubled flash sector size.
8658 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
8659 doubled sector size.
8661 Signed-off-by: Martin Krause <martin.krause@tqs.de>
8663 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
8664 Author: Michal Simek <monstr@monstr.eu>
8665 Date: Sun Oct 14 16:12:29 2007 +0200
8667 [FIX] XUPV2P change command handling
8668 and remove code violation
8670 commit 636400198228d96983c06657b17f760f5989958e
8671 Author: Wolfgang Denk <wd@denx.de>
8672 Date: Sun Oct 14 00:13:19 2007 +0200
8674 Prepare for 1.3.0-rc3 release
8676 Signed-off-by: Wolfgang Denk <wd@denx.de>
8678 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
8679 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8680 Date: Sat Sep 29 13:41:37 2007 +0200
8682 Fix warning differ in signedness in cpu/pxa/mmc.c
8684 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8686 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
8687 Author: Wolfgang Denk <wd@denx.de>
8688 Date: Sat Oct 13 23:51:14 2007 +0200
8690 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
8692 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8693 Signed-off-by: Wolfgang Denk <wd@denx.de>
8695 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
8696 Author: Wolfgang Denk <wd@denx.de>
8697 Date: Sat Oct 13 21:15:39 2007 +0200
8699 Coding Style cleanup.
8701 Signed-off-by: Wolfgang Denk <wd@denx.de>
8703 commit e1893815b0999410d7a327589611c7b38e95299e
8704 Author: Wolfgang Denk <wd@denx.de>
8705 Date: Fri Oct 12 15:49:39 2007 +0200
8709 Signed-off-by: Wolfgang Denk <wd@denx.de>
8711 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
8712 Author: Grzegorz Bernacki <gjb@semihalf.com>
8713 Date: Tue Oct 9 13:58:24 2007 +0200
8715 [ads5121] EEPROM support added.
8717 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
8719 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
8720 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8721 Date: Sat Oct 6 18:55:35 2007 +0200
8723 AVR32: Initialize bi_flash* in board_init_r
8725 The ATSTK1000-specific flash driver intializes bi_flashstart,
8726 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
8729 Initialize these in board_init_r instead so that things will still be
8730 set up correctly when we switch to the CFI driver.
8732 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8734 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
8735 Author: Marian Balakowicz <m8@semihalf.com>
8736 Date: Fri Oct 5 10:40:54 2007 +0200
8738 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
8740 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
8742 commit 92869195ef8210758d2176230c0a36897afd50ed
8743 Author: Bartlomiej Sieka <tur@semihalf.com>
8744 Date: Fri Oct 5 09:46:06 2007 +0200
8746 CM5200: Fix missing null-termination in hostname manipulation code
8748 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
8750 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
8751 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8752 Date: Tue Oct 2 19:09:01 2007 +0200
8754 Fix memtest breakage
8756 CFG_MEMTEST_START uses weird magic involving gd, which fails to
8757 compile. Use hardcoded values instead (we actually know how much RAM
8760 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8762 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
8763 Author: Stefan Roese <sr@denx.de>
8764 Date: Tue Oct 2 11:44:46 2007 +0200
8766 ppc4xx: Coding style cleanup
8768 Signed-off-by: Stefan Roese <sr@denx.de>
8770 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
8771 Author: Stefan Roese <sr@denx.de>
8772 Date: Tue Oct 2 11:44:19 2007 +0200
8774 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
8776 Signed-off-by: Stefan Roese <sr@denx.de>
8778 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
8779 Author: Grzegorz Bernacki <gjb@semihalf.com>
8780 Date: Mon Oct 1 09:51:50 2007 +0200
8782 Program EPLD to force full duplex mode for PHY.
8784 EPLD forces modes of PHY operation. By default full duplex is turned off.
8785 This fix turns it on.
8787 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
8789 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
8790 Author: Timo Ketola <timo.ketola@exertus.fi>
8791 Date: Mon Sep 24 14:50:32 2007 +0300
8793 Bugfix: Use only one PTD for one endpoint
8795 Original isp116x-hcd code prepared multiple PTDs for longer than 16
8796 byte transfers for one endpoint. That is unnecessary because the
8797 ISP116x is able to split long data from one PTD into multiple
8798 transactions based on the buffer size of the endpoint. It also caused
8799 serious problems if the endpoint NAKed some of the transactions. In
8800 that case ISP116x wouldn't notice that the other PTDs were for the same
8801 endpoint and would try the other PTDs possibly out of order. That would
8802 break the whole transfer.
8804 This patch makes isp116x_submit_job to use one PTD for one transfer.
8806 Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
8807 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
8809 commit 86ec86c04326c3913178a7679aa910de071da75d
8810 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8811 Date: Thu Sep 27 23:27:47 2007 +0200
8813 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
8815 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8817 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
8818 Author: Stefan Roese <sr@denx.de>
8819 Date: Tue Sep 11 14:12:55 2007 +0200
8821 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
8823 Signed-off-by: Stefan Roese <sr@denx.de>
8825 commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
8826 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
8827 Date: Wed Sep 26 16:35:54 2007 -0500
8829 85xx io out functions need sync after write.
8831 This fixes the mc146818 rtc_read/write functions for 85xx.
8833 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
8835 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
8836 Author: Grant Likely <grant.likely@secretlab.ca>
8837 Date: Tue Sep 25 15:48:05 2007 -0600
8839 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
8841 CFG_FPGA_XILINX is a bit value used to test against the value in
8842 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
8843 think that is the intention in this code.
8845 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
8847 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
8848 Author: Michal Simek <monstr@monstr.eu>
8849 Date: Mon Sep 24 00:41:30 2007 +0200
8851 [FIX] change command handling and removing code violation
8853 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
8854 Author: Michal Simek <monstr@monstr.eu>
8855 Date: Mon Sep 24 00:36:06 2007 +0200
8857 [FIX] change sets of commands
8858 because changing of command handling brings
8859 compilation problems
8861 commit cb1bc63b75a232571eb69aa2c8aa919321655845
8862 Author: Michal Simek <monstr@monstr.eu>
8863 Date: Mon Sep 24 00:30:42 2007 +0200
8865 [FIX] Email reparation & Copyright
8866 Both codes are written by myself without any
8869 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
8870 Author: Michal Simek <monstr@monstr.eu>
8871 Date: Mon Sep 24 00:25:11 2007 +0200
8873 [PATCH] Change macro name for UartLite
8874 because PowerPC 405 can use UartLite as console
8876 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
8877 Author: Michal Simek <monstr@monstr.eu>
8878 Date: Mon Sep 24 00:21:19 2007 +0200
8880 [PATCH] Add support for design without interrupt controller
8883 commit 0731933ec8ec45d02ba89b52df673d526873cdde
8884 Author: Michal Simek <monstr@monstr.eu>
8885 Date: Mon Sep 24 00:19:48 2007 +0200
8887 [FIX] resolve problem with cpu without barrel shifter
8889 commit db14d77995ce515b728b178b63f82babe60e3d56
8890 Author: Michal Simek <monstr@monstr.eu>
8891 Date: Mon Sep 24 00:18:46 2007 +0200
8893 [FIX] repair email address
8895 commit 481d4328618804add1f818a6c96296121cd0528e
8896 Author: Michal Simek <monstr@monstr.eu>
8897 Date: Mon Sep 24 00:17:42 2007 +0200
8899 [FIX] repair MFSL commands
8901 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
8902 Author: Michal Simek <monstr@monstr.eu>
8903 Date: Mon Sep 24 00:08:37 2007 +0200
8905 synchronizition with mainline
8907 commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
8908 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8909 Date: Sun Sep 23 02:42:38 2007 +0900
8911 sh: Add support command of ide with sh
8913 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8915 commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
8916 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8917 Date: Sun Sep 23 02:38:42 2007 +0900
8921 Add support MS7722SE01 to Makefile.
8923 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8925 commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
8926 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8927 Date: Sun Sep 23 02:31:13 2007 +0900
8929 sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
8931 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8933 commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
8934 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8935 Date: Sun Sep 23 02:19:24 2007 +0900
8937 sh: Update MS7750SE01 platform
8939 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8941 commit 516ad760db3553766267ada01b7d5d727faa4bbd
8942 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8943 Date: Sun Sep 23 02:17:08 2007 +0900
8945 sh: Remove comment out code from include/asm-sh/cpu_sh4.h
8947 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8949 commit b02bad128669e567fce87d8df823b06a0144b8db
8950 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8951 Date: Sun Sep 23 02:12:30 2007 +0900
8953 sh: Update core code of SuperH.
8955 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8957 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
8958 Author: Wolfgang Denk <wd@denx.de>
8959 Date: Thu Sep 20 00:04:14 2007 +0200
8963 Signed-off-by: Wolfgang Denk <wd@denx.de>
8965 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
8966 Author: Wolfgang Denk <wd@denx.de>
8967 Date: Tue Sep 18 21:36:35 2007 +0200
8969 Avoid compiler warning.
8971 Signed-off-by: Wolfgang Denk <wd@denx.de>
8973 commit 8a783a65851bc7421ab69f442261215e21b8891a
8974 Author: Grant Likely <grant.likely@secretlab.ca>
8975 Date: Tue Sep 18 12:24:57 2007 -0600
8977 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
8979 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
8980 nulls in a string differently. For example, the following statement:
8981 echo "this is a string\0" > afile
8982 Will produce the following with /bin/bash:
8983 "this is a string\0"
8984 But with /bin/dash, will produce:
8987 Bug fixed by moving the embedded null out of the makefile and into the
8988 config header. Also renamed the macro to avoid usage colision with the same
8989 macro used by other board ports.
8991 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
8993 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
8994 Author: Wolfgang Denk <wd@denx.de>
8995 Date: Tue Sep 18 17:40:27 2007 +0200
8997 MCC200: fix build warning
8999 The MCC200 board config file includes version.h for some customer-
9000 specific setting, which causes warnings with "make depend"; build
9001 version.h before depend.
9003 Signed-off-by: Wolfgang Denk <wd@denx.de>
9005 commit bd86220f58b99d6896198c385fda132f0c980915
9006 Author: Peter Pearse <peter.pearse@arm.com>
9007 Date: Tue Sep 18 13:07:54 2007 +0100
9009 Move coloured led API to status_led.h
9010 Improve indentation in drivers/at45.c
9012 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
9013 Author: Eirik Aanonsen <eaa@wprmedical.com>
9014 Date: Tue Sep 18 08:47:20 2007 +0200
9016 Update atstk1002 bootargs.
9018 Updates to atstk1002 U-Boot header file:
9020 * Set the bootargs for at1002 to point to the SD-card partition instead
9021 * ... of the boot flash.
9022 * Removing the rootfstype since that argument are not needed.
9024 Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
9025 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
9027 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
9028 Author: Eirik Aanonsen <eaa@wprmedical.com>
9029 Date: Wed Sep 12 13:32:37 2007 +0200
9031 Add some comments to clocks in atstk1002.h
9033 This patch applies some clarifying comments to how the different
9034 clocks are setup according to atstk1002.h Some of the previous
9035 comments where stating wrongful information.
9037 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
9039 commit 97213f32416ead885deafea86774e912ffd60ad0
9040 Author: David Saada <David.Saada@ecitele.com>
9041 Date: Mon Sep 17 17:04:47 2007 +0200
9043 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
9045 Signed-off-by: David Saada <david.saada@ecitele.com>
9047 commit 30363e98fa470fbecea5e8bc0f1443352754f303
9048 Author: Stefan Roese <sr@denx.de>
9049 Date: Mon Sep 17 08:20:47 2007 +0200
9051 Small whitespace cleanup of OneNAND patch
9053 Signed-off-by: Stefan Roese <sr@denx.de>
9055 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
9056 Author: Kyungmin Park <kmpark@infradead.org>
9057 Date: Mon Sep 10 17:15:14 2007 +0900
9059 OneNAND support (take #2)
9061 [PATCH 3/3] OneNAND support (take #2)
9063 OneNAND support at U-Boot
9065 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
9067 commit 17aa2800457df0c06b41516f46f126712c196219
9068 Author: Kyungmin Park <kmpark@infradead.org>
9069 Date: Mon Sep 10 17:14:34 2007 +0900
9071 OneNAND support (take #2)
9073 [PATCH 2/3] OneNAND support (take #2)
9075 OneNAND support at U-Boot
9077 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
9079 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
9080 Author: Kyungmin Park <kmpark@infradead.org>
9081 Date: Mon Sep 10 17:13:49 2007 +0900
9083 OneNAND support (take #2)
9085 [PATCH 1/3] OneNAND support (take #2)
9087 OneNAND support at U-Boot
9089 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
9091 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
9092 Author: Michal Simek <monstr@monstr.eu>
9093 Date: Sun Sep 16 20:51:57 2007 +0200
9095 [FIX] remove files form repository
9097 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
9098 Author: Wolfgang Denk <wd@denx.de>
9099 Date: Sun Sep 16 17:10:04 2007 +0200
9101 TQM8xx[LM]: Fix broken environment alignment.
9103 With recent toolchains, the environment sectors were no longer aligned to
9104 sector boundaries. The reason was a combination of two bugs:
9106 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
9107 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
9108 this gets defined, is not included here (and cannot be included
9109 without causing lots of problems).
9111 Added a new #define CFG_USE_PPCENV for all boards which really
9112 want to put the environment is a ".ppcenv" section.
9114 2) The linker scripts just include environment.o, silently assuming
9115 that the objects in that file are really in the order in which
9116 they are coded in the C file, i. e. "environment" first, then
9117 "redundand_environment", and "env_size" last. However, current
9118 toolchains (GCC-4.x) reorder the objects, causing the environment
9119 data not to start on a flash sector boundary:
9123 40008000 T environment 40008000 T env_size
9124 4000c000 T redundand_environment 40008004 T redundand_environment
9125 40010000 T env_size 4000c004 T environment
9127 Note: this patch fixes just the first part, and cures the alignment
9128 problem by making sure that "env_size" gets placed correctly. However,
9129 we still have a potential issue because primary and redundant
9130 environment sectors are actually swapped, i. e. we have now:
9132 40008000 T redundand_environment
9133 4000c000 T environment
9136 This shall be fixed in the next version.
9138 Signed-off-by: Wolfgang Denk <wd@denx.de>
9140 commit eb6da8050797c204c9d010548424186c7ce32fc1
9141 Author: Wolfgang Denk <wd@denx.de>
9142 Date: Sun Sep 16 02:39:35 2007 +0200
9144 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
9146 Signed-off-by: Wolfgang Denk <wd@denx.de>
9148 commit cd2d1602c54cc6957bdef3872272a4b264893960
9149 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
9150 Date: Mon Sep 10 14:54:56 2007 -0400
9154 Fixup for the break statement in wrong place.
9156 [Patch by urwithsughosh@gmail.com]
9157 Acked-by: Andy Fleming <afleming@freescale.com>
9158 Signed-off-by: Wolfgang Denk <wd@denx.de>
9160 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
9161 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9162 Date: Tue Sep 11 17:04:00 2007 +0200
9164 Fix do_div() usage in nand process output
9166 Fix usage of do_div() in nand erase|read|write process output.
9168 The last patch to nand_util.c introduced do_div() instead of libgcc's
9169 implementation. But do_div() returns the quotient in its first
9170 macro parameter and not as result.
9172 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9174 commit c750d2e6692a000a82f29de7bf24e3dc21239161
9175 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9176 Date: Wed Sep 12 12:36:53 2007 +0200
9178 NAND: Add CFG_NAND_QUIET option
9180 This config option sets the default for the progress information
9181 output behavior that can also be configured through the 'quiet'
9182 environment variable.
9184 The legacy NAND code does not print the current progress info
9185 on the console. So this option is for backward compatibility for
9186 units that are in the field and where setting the quiet variable
9187 is not an option. With CFG_NAND_QUIET set to '1' the console
9188 progress info is turned off. This can still be overwritten
9189 through the environment variable.
9191 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9193 commit dcb88630290d2bcd803386dd4c2be73142994c4f
9194 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
9195 Date: Thu Sep 13 16:06:05 2007 -0700
9197 ColdFire: fix build error becasue of bad type of mii_init()
9199 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9201 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
9202 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
9203 Date: Thu Sep 13 16:04:05 2007 -0700
9205 ColdFire: Fix build error caused by pixis.c
9207 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
9209 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
9211 commit e21659e30660a1377c42af135a6114efe39801d9
9212 Author: Sam Sparks <SSparks@twacs.com>
9213 Date: Fri Sep 14 11:14:42 2007 -0600
9215 Update MPC8349ITX*_config to place config.tmp in right place.
9217 MPC834ITX*_config does not store config.tmp at the correct locatation,
9218 causing MPC8349ITXGP to have the wrong TEXT_BASE.
9220 Signed-off-by: Sam Sparks <SSparks@twacs.com>
9221 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9223 commit 1218abf1b5817a39a82399b4b928b00750575bda
9224 Author: Wolfgang Denk <wd@denx.de>
9225 Date: Sat Sep 15 20:48:41 2007 +0200
9227 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
9229 Signed-off-by: Wolfgang Denk <wd@denx.de>
9231 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
9232 Author: Dirk Behme <dirk.behme@googlemail.com>
9233 Date: Sat Sep 15 11:55:42 2007 +0200
9235 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
9237 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
9240 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
9242 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
9244 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
9245 Author: Michal Simek <monstr@monstr.eu>
9246 Date: Sat Sep 15 00:03:35 2007 +0200
9248 Synchronize with U-BOOT mainline
9250 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
9251 Author: Sam Sparks <SSparks@twacs.com>
9252 Date: Fri Sep 14 11:14:42 2007 -0600
9254 Update MPC8349ITX*_config to place config.tmp in right place.
9256 MPC834ITX*_config does not store config.tmp at the correct locatation,
9257 causing MPC8349ITXGP to have the wrong TEXT_BASE.
9259 Signed-off-by: Sam Sparks <SSparks@twacs.com>
9260 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9261 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9263 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
9264 Author: Bartlomiej Sieka <tur@semihalf.com>
9265 Date: Thu Sep 13 18:21:48 2007 +0200
9267 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
9269 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9271 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
9272 Author: Bartlomiej Sieka <tur@semihalf.com>
9273 Date: Thu Sep 13 16:33:59 2007 +0200
9275 tqm5200: Restore customary env. variable boot commands for powerpc kernels
9277 - update default definitions of kernel_addr and fdt_addr env. variables
9278 - make arch/powerpc booting the default scenario
9279 - update MTD partition layout to match the above
9281 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9283 commit f34024d4a328e6edd906456da98d2c537155c4f7
9284 Author: Wolfgang Denk <wd@denx.de>
9285 Date: Wed Sep 12 00:48:57 2007 +0200
9287 Fix memory corruption problem on STX GP3 SSA Board.
9289 Signed-off-by: Wolfgang Denk <wd@denx.de>
9291 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
9292 Author: Peter Pearse <peter.pearse@arm.com>
9293 Date: Tue Sep 11 15:35:01 2007 +0100
9297 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
9298 Author: Grzegorz Bernacki <gjb@semihalf.com>
9299 Date: Tue Sep 11 15:42:11 2007 +0200
9301 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
9302 scan on second pci bus.
9304 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
9306 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
9307 Author: Grzegorz Bernacki <gjb@semihalf.com>
9308 Date: Tue Sep 11 12:57:52 2007 +0200
9310 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
9312 Bamboo has a file sdram.c which needs special treatment when building in
9313 separate directory. It has to be linked to build directory otherwise it is
9316 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
9318 commit d45963854eff39d575124d859419bb4953ce2c87
9319 Author: Michal Simek <monstr@monstr.eu>
9320 Date: Tue Sep 11 00:37:04 2007 +0200
9322 [FIX] Microblaze ML401 - repare FLASH handling
9324 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
9325 Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
9326 Date: Mon Sep 10 16:55:59 2007 +0100
9328 Allocate CPU Architecture Code for STMicroelectronics' ST200.
9330 Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
9331 ---------------------------------------------------
9333 commit 754bac48156f8958d8f6a53a51eda88ab5758929
9334 Author: Wolfgang Denk <wd@denx.de>
9335 Date: Mon Sep 10 20:42:31 2007 +0200
9337 Update version to match current state.
9339 Signed-off-by: Wolfgang Denk <wd@denx.de>
9341 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
9342 Author: Grzegorz Bernacki <gjb@semihalf.com>
9343 Date: Mon Sep 10 17:39:08 2007 +0200
9345 [MPC512x] Streamline frame handling in the FEC driver
9347 - convert frame size settings to be derived from a single base
9348 - set frame size to the recommended default value
9350 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
9352 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
9353 Author: Kyungmin Park <kmpark@infradead.org>
9354 Date: Mon Sep 10 11:34:00 2007 +0900
9356 Remove compiler warning: target CPU does not support interworking
9358 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
9360 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
9361 Author: Wolfgang Denk <wd@denx.de>
9362 Date: Sun Sep 9 21:21:33 2007 +0200
9364 Fix compile error in spc1920 config.
9366 Signed-off-by: Markus Klotzbücher <mk@denx.de>
9367 Signed-off-by: Wolfgang Denk <wd@denx.de>
9369 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
9370 Author: Grant Likely <grant.likely@secretlab.ca>
9371 Date: Fri Sep 7 09:25:07 2007 -0600
9373 Bugfix: make bootm+libfdt compile on boards with no flash
9375 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9377 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
9378 Author: Grzegorz Bernacki <gjb@semihalf.com>
9379 Date: Fri Sep 7 18:35:37 2007 +0200
9381 [PPC440SPe] PCIe environment settings for Katmai and Yucca
9383 - 'pciconfighost' is set by default in order to be able to scan bridges
9384 behind the primary host/PCIe
9386 - 'pciscandelay' env variable is recognized to allow for user-controlled
9387 delay before the PCIe bus enumeration; some peripheral devices require a
9388 significant delay before they can be scanned (e.g. LSI8408E); without the
9389 delay they are not detected
9391 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
9393 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
9394 Author: Grzegorz Bernacki <gjb@semihalf.com>
9395 Date: Fri Sep 7 18:20:23 2007 +0200
9397 [PPC440SPe] Improve PCIe configuration space access
9399 - correct configuration space mapping
9400 - correct bus numbering
9401 - better access to config space
9403 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
9404 first device on the first bus. We now allow to configure up to 16 buses;
9405 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
9406 peripheral devices farther in hierarchy can be identified.
9408 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
9410 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
9411 Author: Grzegorz Bernacki <gjb@semihalf.com>
9412 Date: Fri Sep 7 17:46:18 2007 +0200
9414 [PPC440SPe] Convert machine check exceptions handling
9416 Convert using fixup mechanism to suppressing MCK for the duration of config
9417 read/write transaction: while fixups work fine with the case of a precise
9418 exception, we identified a major drawback with this approach when there's
9419 an imprecise case. In this scenario there is the following race condition:
9420 the fixup is (by design) set to catch the instruction following the one
9421 actually causing the exception; if an interrupt (e.g. decrementer) happens
9422 between those two instructions, the ISR code is executed before the fixup
9423 handler the machine check is no longer protected by the fixup handler as it
9424 appears as within the ISR code. In consequence the fixup approach is being
9425 phased out and replaced with explicit suppressing of MCK during a PCIe
9426 config read/write cycle.
9428 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
9430 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
9431 Author: Wolfgang Denk <wd@denx.de>
9432 Date: Fri Sep 7 17:43:36 2007 +0200
9434 Fix typo in MAKEALL script.
9436 Signed-off-by: Wolfgang Denk <wd@denx.de>
9438 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
9439 Author: Grzegorz Bernacki <gjb@semihalf.com>
9440 Date: Fri Sep 7 17:09:21 2007 +0200
9442 [MPC512x] Proper handling of larger frames in the FEC driver
9444 When frame larger than local RX buffer is received, it is split and handled
9445 by two buffer descriptors. Prior to this patch the FEC driver discarded
9446 contents of a buffer descriptor without the 'LAST' bit set, so the first
9447 part of the frame was lost in case of larger frames. This fix allows to
9448 safely combine the two pieces into the whole frame.
9450 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
9452 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
9453 Author: Rafal Jaworowski <raj@semihalf.com>
9454 Date: Fri Sep 7 17:05:36 2007 +0200
9456 [MPC512x] Correct fixup relocation
9458 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
9460 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
9461 Author: Wolfgang Denk <wd@denx.de>
9462 Date: Fri Sep 7 01:21:25 2007 +0200
9464 Update CHANGELOG, minor coding style cleanup.
9466 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
9467 Author: stefano babic <sbabic@denx.de>
9468 Date: Thu Aug 30 23:01:49 2007 +0200
9470 PXA270: Added support for TrizepsIV board.
9472 This patch add support for the Trizeps IV module (520Mhz).
9474 Signed-off-by: Stefano Babic <sbabic@denx.de>
9476 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
9477 Author: stefano babic <sbabic@denx.de>
9478 Date: Thu Aug 30 22:57:04 2007 +0200
9480 PXA270: Add support for multiple serial ports.
9482 This patch adds support for multiple serial ports to the PXA target.
9483 FFUART, BTUART and STUART are supported.
9485 Signed-off-by: Stefano Babic <sbabic@denx.de>
9487 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
9488 Author: stefano babic <sbabic@denx.de>
9489 Date: Thu Aug 30 22:48:47 2007 +0200
9491 PXA270: fix compile issue (invalid lvalue)
9493 Code is broken for PXA270 due to "invalid lvalue in assignment".
9495 This patch fix it in pxa-regs.h
9497 Signed-off-by: Stefano Babic <sbabic@denx.de>
9499 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
9500 Author: Jason Jin <Jason.jin@freescale.com>
9501 Date: Thu Aug 30 18:19:05 2007 +0800
9503 Add BUILD_DIR support for bios emulator.
9505 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
9507 commit b4d8a55145442f136982634862341a3e02002bda
9508 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9509 Date: Fri Aug 31 14:41:51 2007 +0900
9511 [MIPS] Remove inline asm string functions
9513 Stop using inline string functions on MIPS as other ARCHs do so,
9514 since the optimized inline asm versions are not small.
9516 This change is triggered by a following MIPS build error:
9517 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
9518 common/exports.c:32: undefined reference to `strcmp'
9519 make: *** [u-boot] Error 1
9521 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9523 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
9524 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9525 Date: Fri Aug 31 14:41:45 2007 +0900
9527 [MIPS] Update asm string header
9529 This patches contains several bugfixes and cleanups in the latest upstream:
9531 - Don't include linux/config.h
9532 - Remove buggy inline version of memscan.
9533 - Merge with Linux 2.6.11-rc3.
9534 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
9535 - Goodbye mips64. 31704 lines of code bite the dust.
9536 - Replace extern inline with static inline.
9537 - Fix return value of strncpy.
9538 - Remove a bunch more "$1" clobbers.
9540 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9542 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
9543 Author: Bartlomiej Sieka <tur@semihalf.com>
9544 Date: Tue Sep 4 17:31:22 2007 +0200
9546 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
9548 Fix incorrect blob address calculation in do_bootm_linux() that prevents
9549 booting the kernel from a multi-file image (kernel + initrd + blob).
9551 Also, make minor updates to the U-Boot's output and to the coding style.
9553 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9555 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
9556 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
9557 Date: Fri Aug 31 14:29:04 2007 +0200
9559 Add support for Sil680 IDE controller.
9561 o add drivers/sil680.c to support the Sil680 IDE-controller.
9562 o drivers/Makefile: add sil680.o.
9564 Signed-off-by: Gary Jennejohn <garyj@denx.de>
9566 commit e79021223bc339df655e360645a52c457a74b067
9567 Author: Grant Likely <grant.likely@secretlab.ca>
9568 Date: Thu Sep 6 09:47:40 2007 -0600
9570 bootm/fdt: Only process the fdt if an fdt address was provided
9572 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
9573 kernels using the board info structure (instead of passing a device tree)
9574 This change allows the old style booting to be used if the fdt argument
9575 was not passed to 'bootm'.
9577 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9578 Acked-by: Kim Phillips <kim.phillips@freescale.com>
9580 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
9581 Author: Grant Likely <grant.likely@secretlab.ca>
9582 Date: Thu Sep 6 09:46:23 2007 -0600
9584 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
9586 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
9588 Tested on: lite5200b
9590 Note: the fixup functions have not been moved to a common place. This
9591 patch is targeted for immediate merging as in solves a build issue, but
9592 the final name/location of the fixups is still subject to debate. I
9593 propose to merge this now, and move the fixups in the next merge window
9594 to be usable by all targets.
9596 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9598 commit 41bb76e941929f54a73206fb132f7a4c275543a3
9599 Author: Grant Likely <grant.likely@secretlab.ca>
9600 Date: Thu Sep 6 09:46:17 2007 -0600
9602 libfdt: add convenience function fdt_find_and_setprop()
9604 Given the path to a node, fdt_find_and_setprop() allows a property value
9607 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9609 commit 80767a6cead9990d9e77e62be947843c2c72f469
9610 Author: Peter Pearse <peter.pearse@arm.com>
9611 Date: Wed Sep 5 16:04:41 2007 +0100
9613 Changed API name to coloured_led.h
9614 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
9615 Tidied other cpu/arm920t/start.S code
9617 commit 56a9270521baaa00e12639a978302a67f61ef060
9618 Author: Kumar Gala <galak@kernel.crashing.org>
9619 Date: Thu Aug 30 16:18:18 2007 -0500
9621 Fix ULI RTC support on MPC8544 DS
9623 The RTC on the M1575 ULI chipset requires a dummy read before
9624 we are able to talk to the RTC. We accomplish this by adding a
9625 second memory region to the PHB the ULI is on and read from it.
9627 The second region is added to maintain compatiabilty with Linux's
9628 view of the PCI memory map.
9630 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9632 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
9633 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9634 Date: Thu Aug 30 01:58:48 2007 -0500
9636 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
9638 pcie is now differentiated from pci. Add 8641 bus-range updates.
9640 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9642 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
9643 Author: Peter Pearse <peter.pearse@arm.com>
9644 Date: Tue Sep 4 16:18:38 2007 +0100
9646 Add coloured led interface for ARM boards.
9647 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
9649 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
9650 Author: Peter Pearse <peter.pearse@arm.com>
9651 Date: Tue Sep 4 14:49:28 2007 +0100
9653 Move include/led.h to board/at91rm9200dk
9655 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
9656 Author: Peter Pearse <peter.pearse@arm.com>
9657 Date: Tue Sep 4 14:25:51 2007 +0100
9659 Ran Lindent on drivers/at45.c
9661 commit 557ab89d294f08dd532f21d19861b40093200a33
9662 Author: Peter Pearse <peter.pearse@arm.com>
9663 Date: Tue Sep 4 14:23:50 2007 +0100
9665 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
9667 commit 81b73dec16fd1227369a191e725e10044a9d56b8
9668 Author: Gary Jennejohn <garyj@denx.de>
9669 Date: Fri Aug 31 15:21:46 2007 +0200
9671 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
9673 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
9674 set to non-zero, because it doesn't support MRM (memory-read-
9675 multiple) correctly. We now added the possibility to configure
9676 this register in the board config file, so that the default value
9677 of 8 can be overridden.
9679 Here the details of this patch:
9681 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
9682 board-specific settings. As an example the sequoia board requires 0.
9683 Idea from Stefan Roese <sr@denx.de>.
9684 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
9685 PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
9686 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
9687 CFG_PCI_CACHE_LINE_SIZE to 0.
9689 Signed-off-by: Gary Jennejohn <garyj@denx.de>
9690 Signed-off-by: Stefan Roese <sr@denx.de>
9692 commit 60174746c668b309378a91488dded898e9553eae
9693 Author: Wolfgang Denk <wd@denx.de>
9694 Date: Fri Aug 31 10:01:51 2007 +0200
9696 Fix TFTP OACK code for short packets.
9698 The old code had a loop limit overflow bug which caused a semi-
9699 infinite loop for small packets, because in "i<len-8", "i" was signed,
9700 but "len" was unsigned, and "len-8" became a huge number for small
9703 This is a workaround which replaces broken commit 8f1bc284.
9705 Signed-off-by: Wolfgang Denk <wd@denx.de>
9707 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
9708 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
9709 Date: Thu Aug 30 15:03:05 2007 +0200
9711 Reduce BOOTDELAY variable to 1 second by default for STK1002
9713 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
9714 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
9716 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
9717 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
9718 Date: Thu Aug 30 15:03:04 2007 +0200
9720 Remove double quotation marks around MAC address for STK1002
9722 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
9723 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
9725 commit ff13ac8c7bbebb238e339592de765c546dba1073
9726 Author: Wolfgang Denk <wd@denx.de>
9727 Date: Thu Aug 30 14:42:15 2007 +0200
9729 Backout commit 8f1bc284 as it causes TFTP to fail.
9731 Signed-off-by: Wolfgang Denk <wd@denx.de>
9733 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
9734 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9735 Date: Thu Aug 30 02:26:17 2007 -0500
9737 Revert "Fix MPC8544DS PCIe3 scsi."
9739 This reverts commit 9468e680.
9740 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
9742 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9744 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
9745 Author: Grant Likely <grant.likely@secretlab.ca>
9746 Date: Wed Aug 29 18:26:24 2007 -0600
9748 tftp: don't implicity trust the format of recevied packets
9750 The TFTP OACK code trusts that the incoming packet is formated as
9751 ASCII text and can be processed by string functions. It also has a
9752 loop limit overflow bug where if the packet length is less than 8, it
9753 ends up looping over *all* of memory to find the 'blksize' string.
9755 This patch solves the problem by forcing the packet to be null
9756 terminated and using strstr() to search for the sub string.
9758 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
9760 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
9761 Author: Stefan Roese <sr@denx.de>
9762 Date: Wed Aug 29 16:31:18 2007 +0200
9764 ppc4xx: Change lwmon5 default environment to support Linux RTC
9766 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
9767 to supply the RTC I2C address as bootline parameter. This patch
9768 adds support for this rtc probing parameter to the bootargs:
9770 "rtc-pcf8563.probe=0,0x51"
9772 Signed-off-by: Stefan Roese <sr@denx.de>
9774 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
9775 Author: Kim Phillips <kim.phillips@freescale.com>
9776 Date: Wed Aug 29 09:06:05 2007 -0500
9778 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
9780 this had slipped through the cracks, since the sbc board was added
9781 after I wrote the original patch to remove all these symbols, and
9782 before it was merged.
9784 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9786 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
9787 Author: Wolfgang Denk <wd@denx.de>
9788 Date: Wed Aug 29 14:05:30 2007 +0200
9790 Add mii_init() prototype
9792 to get rid of a *lot* of compiler warnings.
9794 Signed-off-by: Wolfgang Denk <wd@denx.de>
9796 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
9797 Author: Wolfgang Denk <wd@denx.de>
9798 Date: Wed Aug 29 13:35:03 2007 +0200
9800 Disable network support on cmi_mpc5xx board
9802 ..because it caused compiler errors and there seems to be no
9803 board maintainer to take care of this.
9805 Signed-off-by: Wolfgang Denk <wd@denx.de>
9807 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
9808 Author: Kumar Gala <galak@kernel.crashing.org>
9809 Date: Mon Aug 20 09:44:00 2007 -0500
9811 Fix MPC8544DS PCIe3 scsi.
9813 <ed.swarthout@freescale.com>
9815 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
9816 is allocating memory space it doesn't need.
9818 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
9819 Signed-off-by: Andy Fleming <afleming@freescale.com>
9821 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
9822 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9823 Date: Tue Aug 21 09:38:59 2007 -0500
9827 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
9828 correct consoledev needed for linux boot.
9829 Standardize on fdt{file,addr} var to hold dtb file name.
9831 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
9833 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
9835 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
9836 Author: Haiying Wang <Haiying.Wang@freescale.com>
9837 Date: Thu Aug 23 15:20:54 2007 -0400
9839 Enable L2 cache for MPC8568MDS board
9841 The L2 cache size is 512KB for 8568, print out the correct informaiton.
9843 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
9845 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
9846 Author: Jason Jin <Jason.jin@freescale.com>
9847 Date: Wed Aug 22 17:54:49 2007 +0800
9849 Remove the bios emulator binary files from MAI board
9851 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
9853 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
9854 Author: Kim Phillips <kim.phillips@freescale.com>
9855 Date: Tue Aug 21 17:00:17 2007 -0500
9857 support board vendor-common makefiles
9859 if a board/$(VENDOR)/common/Makefile exists, build it.
9861 also add the first such case, board/freescale/common/Makefile, to
9862 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
9863 dictated by board configuration.
9865 thusly get rid of alternate build dir errors such as:
9867 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
9869 by putting the common/ mkdir command in its proper place (the common
9870 Makefile). Common bits from existing individual board Makefiles have
9873 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9875 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
9876 Author: stefano babic <sbabic@denx.de>
9877 Date: Tue Aug 21 15:52:33 2007 +0200
9879 Fix: TFTP is not working on little endian systems
9881 TFTP does not work anymore after multicast tftp
9882 patch was applied on little endian systems.
9885 Signed-off-by: Stefano Babic <sbabic@denx.de>
9887 commit 5f470948570526e9186f053a3003da7719604e90
9888 Author: stefano babic <sbabic@denx.de>
9889 Date: Tue Aug 21 15:50:33 2007 +0200
9891 Fix MAC address setting in DM9000 driver.
9893 The logic to check if there is a correct MAC address in the DM9000
9894 EEPROM, added in the last patch, is wrong. Now the MAC address is
9895 always taken from the environment, even if a suitable MAC is present
9898 Signed-off-by: Stefano Babic <sbabic@denx.de>
9900 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
9901 Author: Martin Krause <martin.krause@tqs.de>
9902 Date: Tue Aug 21 12:40:34 2007 +0200
9904 MPC5xxx: fix some compiler warnings in USB code
9906 Fix the following warnings:
9907 - usb.c:xx: warning: function declaration isn't a prototype
9908 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
9909 from pointer wihtout a cast
9911 Signed-off-by: Martin Krause <martin.krase@tqs.de>
9913 commit 16e23c3f5dab6937f5109365416808c7f15c122b
9914 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
9915 Date: Mon Aug 20 23:55:33 2007 -0500
9917 fsl_pci_init - Remove self PCSRBAR allocation
9919 CPU physical address space was being wasted by allocating a
9920 PCSRBAR PCI inbound region to it's memory space.
9922 As a rule, PCSRBAR should be left alone since it does not affect
9923 transactions from self and other masters may have changed it.
9925 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
9927 commit 0e700ce03a23bb1921149bc77008ace7103d5289
9928 Author: Martin Krause <martin.krause@tqs.de>
9929 Date: Mon Aug 20 13:56:47 2007 +0200
9931 Fix compiler warning in include/s3c2410.h
9933 This patch fixes the "type qualifiers ignored on fuction return tpye"
9934 warning for include/s3c2410.h
9936 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9938 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
9939 Author: Dirk Behme <dirk.behme@googlemail.com>
9940 Date: Mon Aug 20 07:09:05 2007 +0200
9942 Fix compilation error for omap2420h4_config.
9944 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
9945 and flash_probe() calls in env_flash.c.
9947 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
9949 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
9950 Author: Kim Phillips <kim.phillips@freescale.com>
9951 Date: Fri Aug 10 14:34:14 2007 -0500
9953 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
9955 and make some minor corrections to the FDT part of the README.
9957 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9959 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
9960 Author: Wolfgang Denk <wd@denx.de>
9961 Date: Wed Aug 29 01:32:05 2007 +0200
9963 Minor coding style cleanup.
9965 Signed-off-by: Wolfgang Denk <wd@denx.de>
9967 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
9968 Author: Heiko Schocher <hs@pollux.denx.de>
9969 Date: Tue Aug 28 17:40:33 2007 +0200
9971 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
9973 Signed-off-by: Heiko Schocher <hs@denx.de>
9975 commit f98984cb194bb34dbe1db9429d3b51133af30d07
9976 Author: Heiko Schocher <hs@pollux.denx.de>
9977 Date: Tue Aug 28 17:39:14 2007 +0200
9979 IDE: - make ide_inb () and ide_outb () "weak", so boards can
9980 define there own I/O functions.
9981 (Needed for the pcs440ep board).
9982 - The default I/O Functions are again 8 Bit accesses.
9983 - Added CONFIG_CMD_IDE for the pcs440ep Board.
9985 Signed-off-by: Heiko Schocher <hs@denx.de>
9987 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
9988 Author: Semih Hazar <semih.hazar@indefia.com>
9989 Date: Mon Aug 20 19:00:01 2007 +0300
9991 AVR32: Change prototype of memset
9993 Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
9994 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
9996 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
9997 Author: Yuri Tikhonov <yur@emcraft.com>
9998 Date: Sat Aug 25 05:07:16 2007 +0200
10000 POST: limit memory test area to not touch global data anymore
10002 As experienced on lwmon5, on some boards the POST memory test can
10003 corrupt the global data buffer (bd). This patch fixes this issue
10004 by checking and limiting this area.
10006 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
10007 Signed-off-by: Stefan Roese <sr@denx.de>
10009 commit 75e1a84d483e36be10e206e539b028c4889e1158
10010 Author: Stefan Roese <sr@denx.de>
10011 Date: Fri Aug 24 15:41:42 2007 +0200
10013 ppc4xx: Add RTC POST test to lwmon5 board configuration
10015 Since this RTC POST test is taking quite a while to complete
10016 it's only initiated upon special keypress same as the complete
10019 Signed-off-by: Stefan Roese <sr@denx.de>
10021 commit d7bfa620037a6d2210159387571bdf93aa32c162
10022 Author: Stefan Roese <sr@denx.de>
10023 Date: Fri Aug 24 15:19:10 2007 +0200
10025 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
10027 Signed-off-by: Stefan Roese <sr@denx.de>
10029 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
10030 Author: Stefan Roese <sr@denx.de>
10031 Date: Thu Aug 23 11:02:37 2007 +0200
10033 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
10035 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
10036 board. Now the "eeprom" command can be used to read/write from/to this
10037 device. Additionally a new command was added "eepromwp" to en-/disable
10038 the write-protect of this 2nd EEPROM.
10040 The 1st EEPROM is not affected by this write-protect command.
10042 Signed-off-by: Stefan Roese <sr@denx.de>
10044 commit c64fb30e4c5976007d56fc1789c7a0666082b536
10045 Author: Stefan Roese <sr@denx.de>
10046 Date: Wed Aug 22 08:56:09 2007 +0200
10048 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
10050 Signed-off-by: Stefan Roese <sr@denx.de>
10052 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
10053 Author: Stefan Roese <sr@denx.de>
10054 Date: Tue Aug 21 16:27:57 2007 +0200
10056 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
10058 This patch adds support for the matrix keyboard on the lwmon5 board.
10059 Since the implementation in the dsPCI is kind of compatible with the
10060 "old" lwmon board, most of the code is copied from the lwmon
10063 Signed-off-by: Stefan Roese <sr@denx.de>
10065 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
10066 Author: Wolfgang Denk <wd@denx.de>
10067 Date: Sun Aug 19 10:27:34 2007 +0200
10069 Fix some build errors.
10071 Signed-off-by: Wolfgang Denk <wd@denx.de>
10073 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
10074 Author: Wolfgang Denk <wd@denx.de>
10075 Date: Sat Aug 18 22:00:38 2007 +0200
10079 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
10080 Author: Kim Phillips <kim.phillips@freescale.com>
10081 Date: Thu Aug 16 22:52:39 2007 -0500
10083 lib_ppc: make board_add_ram_info weak
10085 platforms wishing to display RAM diagnostics in addition to size,
10086 can do so, on one line, in their own board_add_ram_info()
10089 this consequently eliminates CONFIG_ADD_RAM_INFO.
10091 Thanks to Stefan for the hint.
10093 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10095 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
10096 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
10097 Date: Fri Aug 17 12:43:44 2007 +0900
10099 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
10101 This patch has been sent on:
10104 Many users of PCI config read routines tend to ignore the function
10105 ret value, and are only concerned about the contents of *val. Based
10106 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
10107 the *val on dword read error.
10109 Without this fix, for example, we'll go on scanning bus with vendor or
10110 header_type uninitialized. This brings many unnecessary config trials.
10112 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
10114 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
10115 Author: Stefan Roese <sr@denx.de>
10116 Date: Sat Aug 18 14:37:52 2007 +0200
10118 ColdFire: Fix some remaining problems with CFG_CMD_
10120 Signed-off-by: Stefan Roese <sr@denx.de>
10122 commit 8280f6a1c43247616b68224675188e5ccd124650
10123 Author: Stefan Roese <sr@denx.de>
10124 Date: Sat Aug 18 14:33:02 2007 +0200
10126 Coding style cleanup
10128 Signed-off-by: Stefan Roese <sr@denx.de>
10130 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
10131 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10132 Date: Thu Aug 16 19:23:50 2007 -0500
10134 ColdFire: Add M5235EVB Platform for MCF523x
10136 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10138 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
10139 Author: Kim Phillips <kim.phillips@freescale.com>
10140 Date: Fri Aug 17 09:30:00 2007 -0500
10142 mpc83xx: fix typo in DDR2 programming
10144 introduced in the implement board_add_ram_info patch as I was cleaning out the
10145 magic numbers. sorry.
10147 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10149 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
10150 Author: Kim Phillips <kim.phillips@freescale.com>
10151 Date: Thu Aug 16 22:53:09 2007 -0500
10153 mpc83xx: move freescale boards to boards/freescale
10155 includes build fixes.
10157 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10159 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
10160 Author: Kim Phillips <kim.phillips@freescale.com>
10161 Date: Thu Aug 16 22:52:59 2007 -0500
10163 mpc83xx: suppress unused variable 'val8' warning
10165 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10167 commit bbea46f76f767b919070b4829bf34c86bd223248
10168 Author: Kim Phillips <kim.phillips@freescale.com>
10169 Date: Thu Aug 16 22:52:48 2007 -0500
10171 mpc83xx: implement board_add_ram_info
10173 add board_add_ram_info, to make memory diagnostic output more
10174 consistent. u-boot banner output now looks like:
10176 DRAM: 256 MB (DDR1, 64-bit, ECC on)
10178 and for boards with SDRAM on the local bus, a line such as this is
10181 SDRAM: 64 MB (local bus)
10183 also replaced some magic numbers with their equivalent define names.
10185 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10187 commit 14778585d1389d86d5846efec29e5fce892680ce
10188 Author: Tony Li <tony.li@freescale.com>
10189 Date: Fri Aug 17 10:35:59 2007 +0800
10191 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
10193 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
10194 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
10196 Signed-off-by Tony Li <tony.li@freescale.com>
10198 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
10199 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10200 Date: Thu Aug 16 15:05:11 2007 -0500
10202 ColdFire: Add M54455EVB for MCF5445x
10204 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10206 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
10207 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10208 Date: Thu Aug 16 13:20:50 2007 -0500
10210 ColdFire: Add M5253EVBE platform for MCF52x2
10212 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10214 commit a605aacd8324094199402816cc6d9124aba57b8d
10215 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10216 Date: Thu Aug 16 05:04:31 2007 -0500
10218 ColdFire: Add M5249EVB platform for MCF52x2
10220 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10222 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
10223 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10224 Date: Wed Aug 15 20:32:06 2007 -0500
10226 ColdFire: Update Freescale MCF52x2 platforms
10228 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10230 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
10231 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10232 Date: Wed Aug 15 19:55:10 2007 -0500
10234 ColdFire: Update EB+MCF-EV123 platform
10236 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10238 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
10239 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10240 Date: Wed Aug 15 19:46:38 2007 -0500
10242 ColdFire: update TASREG platform for MCF52x2
10244 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10246 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
10247 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10248 Date: Wed Aug 15 19:45:51 2007 -0500
10250 ColdFire: update r5200 platform for MCF52x2
10252 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10254 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
10255 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10256 Date: Wed Aug 15 19:43:20 2007 -0500
10258 ColdFire: idmr platform MCF52x2 update
10260 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10262 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
10263 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10264 Date: Wed Aug 15 19:41:06 2007 -0500
10266 ColdFire: cobra5272 platform for MCF52x2 update
10268 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10270 commit 56115665b4a64c10c01440c57749b265e0908fa4
10271 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10272 Date: Wed Aug 15 19:38:15 2007 -0500
10274 ColdFire: MCF52x2 Header files update
10276 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10278 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
10279 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10280 Date: Wed Aug 15 19:21:21 2007 -0500
10282 ColdFire: MCF52x2 update
10284 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10286 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
10287 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10288 Date: Wed Aug 15 18:46:11 2007 -0500
10290 ColdFire: MCF5329 update cache
10292 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10294 commit 7171977fb8fd77cfb6676953fa9a05789c450513
10295 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10296 Date: Wed Aug 15 15:40:20 2007 -0500
10298 ColdFire: MCF5329 header file clean up
10300 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10302 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
10303 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10304 Date: Wed Aug 15 15:39:17 2007 -0500
10306 ColdFire: MCF5329 Update and cleanup
10308 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10310 commit 10327dc5541f947c0cf7e31fef86c4706169607a
10311 Author: Andy Fleming <afleming@freescale.com>
10312 Date: Thu Aug 16 16:35:02 2007 -0500
10314 Add CONFIG_HAS_ETH0 to all boards with TSEC
10316 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
10317 to update TSEC1's device-tree node, so we need to add it
10318 to all the boards with TSECs. Do this for 83xx and 86xx, too,
10319 since they will eventually do something similar.
10321 Signed-off-by: Andy Fleming <afleming@freescale.com>
10323 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
10324 Author: Kumar Gala <galak@kernel.crashing.org>
10325 Date: Thu Aug 16 15:05:04 2007 -0500
10327 Update MPC8544 DS PCI memory map
10329 The PCIe bus that the ULI M1575 is connected to has no possible way of
10330 needing more than the fixed amount of IO & Memory space needed by the ULI.
10332 So make it use far less IO & memory space and have it use the shared LAW. This
10333 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
10336 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10338 commit ea5877e31ed63ade948fd1293895ec23fe01472e
10339 Author: Kumar Gala <galak@kernel.crashing.org>
10340 Date: Thu Aug 16 11:01:21 2007 -0500
10342 Fix up some fdt issues on 8544DS
10344 It looks like we had a merge issue that duplicated a bit of code
10345 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
10346 the MAC address properly set in the device tree on boot for TSEC1
10348 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10350 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
10351 Author: Niklaus Giger <niklaus.giger@netstal.com>
10352 Date: Thu Aug 16 15:16:03 2007 +0200
10354 PPC4xx:HCU4/5 cleanup
10356 Minor cleanups to confirm to the u-boot coding style.
10357 Some german expressions -> english.
10358 HCU5 enforces a unique IP adress for a given slot in the rack.
10360 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
10362 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
10363 Author: Niklaus Giger <niklaus.giger@netstal.com>
10364 Date: Thu Aug 16 15:16:02 2007 +0200
10366 PPC4xx:HCU4/5 cleanup ecc/sdram init
10368 Make ecc initialisation robust, as DDR2-ECC errors may be generated
10369 while zeroing the RAM.
10371 Return 16 bytes (a cacheline) less than the available memory, as the
10372 board and/or PPC440EPx might have problems accessing the last bytes.
10374 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
10376 commit d35b508a55508535b6e8445b718585d27df733d3
10377 Author: Kim Phillips <kim.phillips@freescale.com>
10378 Date: Wed Aug 15 22:29:56 2007 -0500
10380 fdt: suppress unused variable 'bd' warning
10382 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10384 commit 82bd9ee77490588d4da785d75829ca63d0176baf
10385 Author: Andy Fleming <afleming@freescale.com>
10386 Date: Wed Aug 15 20:06:50 2007 -0500
10388 Fix warnings from of_data copy fix
10390 Forgot to cast of_flat_tree to ulong.
10392 Signed-off-by: Andy Fleming <afleming@freescale.com>
10394 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
10395 Author: Andy Fleming <afleming@freescale.com>
10396 Date: Wed Aug 15 20:03:44 2007 -0500
10398 Don't wait for disconnected TSECs
10400 The TSEC driver's PHY code waits a long time for autonegotiation to
10401 complete, even if the link is down. The PHY knows the link is
10402 down or up before autonegotiation completes, so we can short-circuit
10403 the process if the link is down.
10405 Signed-off-by: Andy Fleming <afleming@freescale.com>
10407 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
10408 Author: Andy Fleming <afleming@freescale.com>
10409 Date: Wed Aug 15 20:03:34 2007 -0500
10411 Fix numerous bugs in the 8568 UEC support
10413 Actually, fixed a large bug in the UEC for *all* platforms.
10414 How did this ever work?
10416 uec_init() did not follow the spec for eth_init(), and returned
10417 0 on success. Switch it to return the link like tsec_init()
10420 The immap for the 8568 was defined based on MPC8568, rather than
10425 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
10427 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
10430 Signed-off-by: Andy Fleming <afleming@freescale.com>
10432 commit 3a79013e2adda53332dfd0b511066a805e929a9d
10433 Author: Andy Fleming <afleming@freescale.com>
10434 Date: Wed Aug 15 20:03:25 2007 -0500
10436 Define tsec flag values in config files
10438 The tsec_info structure and array has a "flags" field for each
10439 ethernet controller. This field is the only reason there are
10440 settings. Switch to defining TSECn_FLAGS for each controller
10441 in the config header, and we can greatly simplify the array, and
10442 also simplify the addition of future boards.
10444 Signed-off-by: Andy Fleming <afleming@freescale.com>
10446 commit ec7238229507e7f47533a611ea8c53319d234cf3
10447 Author: Andy Fleming <afleming@freescale.com>
10448 Date: Wed Aug 15 20:03:13 2007 -0500
10450 Add support for building all boards with a TSEC
10452 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
10453 Now we can do a MAKEALL test on all of them!
10455 Signed-off-by: Andy Fleming <afleming@freescale.com>
10457 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
10458 Author: Andy Fleming <afleming@freescale.com>
10459 Date: Wed Aug 15 17:30:56 2007 -0500
10461 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
10463 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
10464 neglected to *also* put the code inside the similar #ifdef
10465 for CONFIG_OF_FLAT_TREE.
10467 Signed-off-by: Andy Fleming <afleming@freescale.com>
10469 commit 78f9fef7f406078c8bf7191e665a73f795157746
10470 Author: Scott Wood <scottwood@freescale.com>
10471 Date: Wed Aug 15 15:46:46 2007 -0500
10473 mpc885ads: Don't define CONFIG_BZIP2.
10475 bzip2 requires a significant chunk of malloc space, and there isn't
10476 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
10477 and a downloaded image at 0x400000.
10479 Signed-off-by: Scott Wood <scottwood@freescale.com>
10481 commit 002275a3ed8b114885f6702d6d544d0780dfe689
10482 Author: Michal Simek <Monstr@seznam.cz>
10483 Date: Thu Aug 16 08:54:10 2007 +0200
10485 Bios emulator - fix microblaze toolchain problem
10487 microblaze CPU have problem with bios_emulator code.
10488 Microblaze toolchain doesn't support PRAGMA PACK.
10490 Signed-off-by: Michal Simek <monstr@monstr.eu>
10492 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
10493 Author: Wolfgang Denk <wd@denx.de>
10494 Date: Thu Aug 16 11:51:04 2007 +0200
10496 Minor Coding Style fix; Update CHANGELOG file.
10498 Signed-off-by: Wolfgang Denk <wd@denx.de>
10500 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
10501 Author: Stefan Roese <sr@denx.de>
10502 Date: Thu Aug 16 11:21:49 2007 +0200
10504 ppc4xx: Remove #warning in esd auto_update.c
10506 Signed-off-by: Stefan Roese <sr@denx.de>
10508 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
10509 Author: Stefan Roese <sr@denx.de>
10510 Date: Fri Jun 22 17:32:28 2007 +0200
10512 ppc7xx: Update CPCI750 board
10514 This small CPCI750 update extends the board specific command
10515 "show_config" to display the Marvell strapping registers and
10516 extends the PCI IDE controller.
10518 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
10519 Signed-off-by: Stefan Roese <sr@denx.de>
10521 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
10522 Author: Michal Simek <monstr@monstr.eu>
10523 Date: Thu Aug 16 10:46:28 2007 +0200
10525 [FIX] Changes for bios_emulator code for others architecture
10527 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
10528 Author: Michal Simek <monstr@monstr.eu>
10529 Date: Thu Aug 16 10:45:09 2007 +0200
10531 [FIX] Remove unused include file
10533 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
10534 Author: Stefan Roese <sr@denx.de>
10535 Date: Thu Aug 16 10:18:33 2007 +0200
10537 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
10539 Signed-off-by: Stefan Roese <sr@denx.de>
10541 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
10542 Author: Stefan Roese <sr@denx.de>
10543 Date: Thu Aug 16 09:54:51 2007 +0200
10545 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
10547 Signed-off-by: Stefan Roese <sr@denx.de>
10549 commit 02ba7022f62bb75908296c58c63866e1d294b69a
10550 Author: Stefan Roese <sr@denx.de>
10551 Date: Thu Aug 16 09:52:29 2007 +0200
10553 ppc4xx: Update Sequoia/Rainier bootstrap command
10555 As suggested by David Mitchell, here an update for the Sequoia/Rainier
10558 Signed-off-by: Stefan Roese <sr@denx.de>
10560 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
10561 Author: Kim Phillips <kim.phillips@freescale.com>
10562 Date: Wed Aug 15 22:30:39 2007 -0500
10564 mpc83xx: enable libfdt by default on freescale boards
10566 this enables libfdt code by default for the
10567 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
10568 mpc8349itx and gp boards.
10570 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10572 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
10573 Author: Kim Phillips <kim.phillips@freescale.com>
10574 Date: Wed Aug 15 22:30:33 2007 -0500
10576 mpc83xx: migrate remaining freescale boards to libfdt
10578 this adds libfdt support code for the freescale
10579 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
10582 Boards remain compatible with OF_FLAT_TREE.
10584 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10586 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
10587 Author: Kim Phillips <kim.phillips@freescale.com>
10588 Date: Wed Aug 15 22:30:26 2007 -0500
10590 mpc83xx: move common /memory node update mechanism to cpu.c
10592 also adds common prototypes to include/common.h.
10594 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10596 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
10597 Author: Kim Phillips <kim.phillips@freescale.com>
10598 Date: Wed Aug 15 22:30:19 2007 -0500
10600 mpc83xx: remaining 8360 libfdt fixes
10602 PCI clocks and QE frequencies weren't being updated, and the core clock
10603 was being updated incorrectly. This patch also adds a /memory node if
10604 it doesn't already exist prior to update.
10606 plus some cosmetic trimming to single line comments.
10608 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10610 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
10611 Author: Kim Phillips <kim.phillips@freescale.com>
10612 Date: Wed Aug 15 22:30:12 2007 -0500
10614 mpc83xx: fix UEC2->1 typo in libfdt setup code
10616 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10618 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
10619 Author: Kim Phillips <kim.phillips@freescale.com>
10620 Date: Wed Aug 15 22:30:05 2007 -0500
10622 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
10624 and reorder the existing 83xx maintainers alpha.
10626 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10628 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
10629 Author: Michal Simek <monstr@monstr.eu>
10630 Date: Wed Aug 15 21:15:05 2007 +0200
10632 [FIX] Resolve problem with warnings
10633 microblaze toolchain don't support PRAGMA PACK.
10635 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
10636 Author: Michal Simek <monstr@monstr.eu>
10637 Date: Wed Aug 15 21:05:07 2007 +0200
10639 [FIX] Correction command setting for Microblaze boards
10641 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
10642 Author: Michal Simek <monstr@monstr.eu>
10643 Date: Wed Aug 15 21:03:41 2007 +0200
10645 [FIX] Correction command definition
10647 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
10648 Author: Jon Loeliger <jdl@freescale.com>
10649 Date: Wed Aug 15 11:55:35 2007 -0500
10651 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
10653 Remove a leftover in net/tftp.c while we're at it.
10655 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10657 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
10658 Author: Jon Loeliger <jdl@freescale.com>
10659 Date: Wed Aug 15 12:20:40 2007 -0500
10661 Move the MPC8641HPCN board under board/freescale.
10663 Minor path corrections needed to ensure buildability.
10665 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10667 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
10668 Author: Jon Loeliger <jdl@freescale.com>
10669 Date: Wed Aug 15 11:46:22 2007 -0500
10671 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
10673 Remove a leftover in net/tftp.c while we're at it.
10675 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10677 commit 210f463c71917b7a4495c2103c228b9c179ae64d
10678 Author: Jerry Van Baren <gvb.uboot@gmail.com>
10679 Date: Wed Aug 15 11:13:15 2007 -0400
10681 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
10683 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
10684 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
10685 when it should have gone inside of the conditional. As a result, it
10686 broke non-LIBFDT board builds.
10688 Also added a missing "not." to the comment.
10690 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
10692 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
10693 Author: Niklaus Giger <niklaus.giger@netstal.com>
10694 Date: Wed Aug 15 12:14:23 2007 +0200
10696 PPC4xx:HCU4/5-Board fix compile warning
10698 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
10700 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
10701 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
10702 Date: Tue Aug 14 14:06:45 2007 -0500
10704 Fix malloc size error in ahci_init_one.
10706 Typically this causes scsi init to corrupt the
10707 devlist and break the coninfo command.
10708 Fix a compiler size warning.
10710 Signed-off-by: Jason Jin <jason.jin@freescale.com>
10711 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
10712 Acked-by: Andy Fleming <afleming@freescale.com>
10714 commit b361acd64fd2525c081b9b288b0804efe209c0e9
10715 Author: ksi@koi8.net <ksi@koi8.net>
10716 Date: Tue Aug 14 10:02:16 2007 -0700
10718 TI DaVinci - fix unsupported %hhx format
10720 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
10722 commit f01dbb5424a81453c81190dd30e945891466f621
10723 Author: Wolfgang Denk <wd@denx.de>
10724 Date: Tue Aug 14 18:42:36 2007 +0200
10726 Coding style cleanup. Update CHANGELOG.
10728 Signed-off-by: Wolfgang Denk <wd@denx.de>
10730 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
10731 Author: Andy Fleming <afleming@freescale.com>
10732 Date: Tue Aug 14 10:32:59 2007 -0500
10734 Fix initrd/dtb interaction
10736 The original code would wrongly relocate the blob to be right before
10737 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
10738 if it is defined. So we make two changes:
10740 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
10742 2) If the blob is being relocated, relocate it before kbd, not initrd
10744 Signed-off-by: Andy Fleming <afleming@freescale.com>
10746 commit e54b970173769307a116bd34028b6d0c2eea2a4e
10747 Author: Peter Pearse <peter.pearse@arm.com>
10748 Date: Tue Aug 14 15:40:00 2007 +0100
10750 Supply spi interface in at45.c
10752 commit 4ce846ec59f36b85d6644a769690ad3feb667575
10753 Author: Stefan Roese <sr@denx.de>
10754 Date: Tue Aug 14 15:12:01 2007 +0200
10756 POST: Fix merge problem
10758 Signed-off-by: Stefan Roese <sr@denx.de>
10760 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
10761 Author: Stefan Roese <sr@denx.de>
10762 Date: Tue Aug 14 15:03:17 2007 +0200
10764 Coding style cleanup
10766 Signed-off-by: Stefan Roese <sr@denx.de>
10768 commit 779e975117a75e91fcebe226a63104dbfb924ab1
10769 Author: Stefan Roese <sr@denx.de>
10770 Date: Tue Aug 14 14:44:41 2007 +0200
10772 ppc4xx: Add initial Zeus (PPC405EP) board support
10774 Signed-off-by: Stefan Roese <sr@denx.de>
10776 commit c5a172a5fd636c12467429e3f7910e53773979c6
10777 Author: Stefan Roese <sr@denx.de>
10778 Date: Tue Aug 14 14:41:55 2007 +0200
10780 POST: Add option for external ethernet loopback test
10782 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
10783 is not done using an internal loopback connection, but by assuming
10784 that an external loopback connector is plugged into the board.
10786 Signed-off-by: Stefan Roese <sr@denx.de>
10788 commit eb2b4010ae426245172988804ee8d9193fb41038
10789 Author: Stefan Roese <sr@denx.de>
10790 Date: Tue Aug 14 14:39:44 2007 +0200
10792 POST: Add ppc405 support to cache and UART POST
10794 Signed-off-by: Stefan Roese <sr@denx.de>
10796 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
10797 Author: Peter Pearse <peter.pearse@arm.com>
10798 Date: Tue Aug 14 10:46:32 2007 +0100
10800 Replace lost end of at45.c.
10802 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
10803 Author: Peter Pearse <peter.pearse@arm.com>
10804 Date: Tue Aug 14 10:30:06 2007 +0100
10806 Update Makefiles for merged and split at45.c.
10808 commit 3454cece2db57cb9eb7087995f7e73066a163f71
10809 Author: Peter Pearse <peter.pearse@arm.com>
10810 Date: Tue Aug 14 10:21:06 2007 +0100
10812 Delete the merged files.
10814 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
10815 Author: Peter Pearse <peter.pearse@arm.com>
10816 Date: Tue Aug 14 10:14:05 2007 +0100
10820 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
10821 Author: Peter Pearse <peter.pearse@arm.com>
10822 Date: Tue Aug 14 10:10:52 2007 +0100
10824 Add MACH_TYPE records for several AT91 boards.
10825 Merge to two at45.c files into a common file, split to at45.c and spi.c
10826 Fix spelling error in DM9161 PHY Support.
10827 Initialize at91rm9200 board (and set LED).
10828 Add PIO control for at91rm9200dk LEDs and Mux.
10829 Change dataflash partition boundaries to be compatible with Linux 2.6.
10831 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
10832 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
10834 commit 4ef35e53c693556c54b0c22d6f873de87bade253
10835 Author: Wolfgang Denk <wd@denx.de>
10836 Date: Tue Aug 14 09:54:46 2007 +0200
10838 Coding style cleanup, update CHANGELOG
10840 Signed-off-by: Wolfgang Denk <wd@denx.de>
10842 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
10843 Author: Wolfgang Denk <wd@denx.de>
10844 Date: Tue Aug 14 09:47:27 2007 +0200
10846 Coding style cleanup; rebuild CHANGELOG
10848 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
10849 Author: Randy Vinson <rvinson@linuxbox.(none)>
10850 Date: Tue Feb 27 19:42:22 2007 -0700
10852 85xxCDS: Add make targets for legacy systems.
10854 The PCI ID select values on the Arcadia main board differ depending
10855 on the version of the hardware. The standard configuration supports
10856 Rev 3.1. The legacy target supports Rev 2.x.
10858 Signed-off-by Randy Vinson <rvinson@mvista.com>
10860 commit e41094c7e38177c755fbd9b182018069614f080d
10861 Author: Andy Fleming <afleming@freescale.com>
10862 Date: Tue Aug 14 01:50:09 2007 -0500
10864 85xxCDS: Enable the VIA PCI-to-ISA bridge.
10866 Author: Randy Vinson <rvinson@linuxbox.(none)>
10868 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
10869 Arcadia main board.
10871 Signed-off-by: Randy Vinson <rvinson@mvista.com>
10872 Signed-off-by: York Sun <yorksun@freescale.com>
10874 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
10875 Author: Andy Fleming <afleming@freescale.com>
10876 Date: Tue Aug 14 00:14:25 2007 -0500
10878 Add support for UEC to 8568
10880 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
10881 Signed-off-by: Andy Fleming <afleming@freescale.com>
10883 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
10884 Author: Haiying Wang <Haiying.Wang@freescale.com>
10885 Date: Tue Jun 19 14:18:34 2007 -0400
10887 Add PCI support for MPC8568MDS board
10889 This patch is against u-boot-mpc85xx.git of www.denx.com
10891 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
10892 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
10894 commit d111d6382c99fdea08c2312eeeae8786945e189a
10895 Author: Haiying Wang <Haiying.Wang@freescale.com>
10896 Date: Tue Jun 19 14:18:32 2007 -0400
10898 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
10900 This patch is against u-boot-mpc85xx.git of www.denx.com
10902 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
10903 both MPC8548CDS board and MPC8568MDS board, especially for supporting
10906 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
10907 DDR2 on all current board versions especially ver 1.92 or later to bring
10910 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
10912 commit 3db0bef59eab1155801618cef5c481e97553b597
10913 Author: Kumar Gala <galak@kernel.crashing.org>
10914 Date: Tue Aug 7 18:07:27 2007 -0500
10916 Use an absolute address when jumping out of 4k boot page
10918 On e500 when we leave the 4k boot page we should use an absolute address since
10919 we don't know where the board code may want us to be really running at.
10921 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10923 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
10924 Author: Andy Fleming <afleming@freescale.com>
10925 Date: Mon Aug 13 14:49:59 2007 -0500
10927 MPC85xx BA bits not set for 3-bit bank address DIMM
10929 The current implementation does not set the number of bank address bits
10930 (BA) in the processor. The default assumes 2 logical bank bits. This
10931 works fine for a DIMM that uses devices with 4 internal banks (SPD
10932 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
10933 devices with 8 internal banks (SPD byte17 = 0x8).
10935 Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
10937 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
10938 Author: Andy Fleming <afleming@freescale.com>
10939 Date: Mon Aug 13 14:38:06 2007 -0500
10941 Fix minor 85xx warnings
10943 Some patches had inserted warnings into the build:
10944 * mpc8560ads declared data without using it
10945 * cpu_init declared ecm and immap without using it in all CONFIGs
10946 * MPC8548CDS.h had its default filenames changed so that they contained
10947 "\m" in the paths. Made the defaults not Windows-specific (or
10950 Signed-off-by: Andy Fleming <afleming@freescale.com>
10952 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
10953 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
10954 Date: Fri Jul 27 01:50:52 2007 -0500
10956 8548cds PCIE support.
10958 Make the early L1 cache stack region guarded to prevent speculative
10959 fetches outside the locked range.
10961 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
10962 init.S whitespace cleanup.
10964 Allow TEXT_BASE value to be specified on command line. This allows it
10965 to be set to 0xfffc0000 which cuts the uboot binary in half.
10967 Clear and enable lbc and ecm errors.
10969 Update last_busno in device-tree for pci and pcie.
10971 Remove load of obsolete cpu/mpc85xx/pci.0
10973 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
10974 Acked-by: Andy Fleming <afleming@freescale.com>
10976 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
10977 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
10978 Date: Fri Jul 27 01:50:51 2007 -0500
10980 8544ds PCIE support
10982 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
10984 Enable LBC and ECM errors and clear error registers.
10986 Add tftpflash env var to get uboot from tftp server and flash it.
10988 Add pci/pcie convenience env vars to display register space:
10989 "run pcie3regs" to see all pcie3 ccsr registers
10990 "run pcie3cfg" to see all cfg registers
10991 Whitespace cleanup and MPC8544DS.h
10993 Enable CONFIG_INTERRUPTS.
10995 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
10996 Acked-by: Andy Fleming <afleming@freescale.com>
10998 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
10999 Author: Andy Fleming <afleming@freescale.com>
11000 Date: Tue Aug 14 01:34:21 2007 -0500
11002 85xx start.S cleanup and exception support
11004 From: Ed Swarthout <Ed.Swarthout@freescale.com>
11006 Support external interrupts from platform to eliminate system hangs.
11007 Define CONFIG_INTERRUPTS board configure option to enable.
11008 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
11010 Remove extra cpu initialization redundant with hardware initialization.
11011 Whitespace cleanup.
11013 Define and use _START_OFFSET consistent with other processors using
11016 Move additional code from .text to boot page to make room for
11017 exception vectors at start of image.
11019 Handle Machine Check, External and Critical exceptions.
11021 Fix e500 machine check error determination in traps.c
11023 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
11025 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
11026 Acked-by: Andy Fleming <afleming@freescale.com>
11028 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
11029 Author: Andy Fleming <afleming@freescale.com>
11030 Date: Tue Aug 14 01:33:18 2007 -0500
11032 Add MPC8544DS README
11034 Signed-off-by: Andy Fleming <afleming@freescale.com>
11036 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
11037 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
11038 Date: Fri Jul 27 01:50:48 2007 -0500
11040 85xx allow debugger to configure ddr.
11042 Only check for mpc8548 rev 1 when compiled for 8548.
11044 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
11045 Acked-by: Andy Fleming <afleming@freescale.com>
11047 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
11048 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
11049 Date: Fri Jul 27 01:50:47 2007 -0500
11051 mpc85xx L2 cache reporting and SRAM relocation option.
11053 Allow debugger to override flash cs0/cs1 settings to enable alternate
11056 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
11057 Acked-by: Andy Fleming <afleming@freescale.com>
11059 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
11060 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
11061 Date: Fri Jul 27 01:50:46 2007 -0500
11063 e500 needs ppc_asm.tmp MCK_EXCEPTION
11065 Always define MCK_EXCEPTION macro - so e500 can use it too.
11067 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
11068 Acked-by: Andy Fleming <afleming@freescale.com>
11070 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
11071 Author: David Updegraff <dave@cray.com>
11072 Date: Mon Jun 11 10:41:07 2007 -0500
11074 multicast tftp: RFC2090
11076 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
11077 on Realtek RTL8139 and Freescale TSEC.
11079 Signed-off-by: David Updegraff <dave@cray.com>
11080 Signed-off-by: Ben Warren <bwarren@qstreams.com>
11082 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
11083 Author: Wilson Callan <wcallan@savantav.com>
11084 Date: Sat Jul 28 10:56:13 2007 -0400
11086 New CONFIG_BOOTP_SERVERIP option
11088 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
11089 from the bootp server
11091 Signed-off-by: Wilson Callan <wcallan@savantav.com>
11092 Signed-off-by: Ben Warren <bwarren@qstreams.com>
11094 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
11095 Author: Mike Rapoport <mike@compulab.co.il>
11096 Date: Sun Aug 12 08:48:27 2007 +0300
11098 Add ability to take MAC address from the environment to DM9000 driver
11100 Signed-off-by: Mike Rapoport <mike@compulab.co.il>
11101 Signed-off-by: Ben Warren <bwarren@qstreams.com>
11103 commit be5d72d10d47609326226225181e301fb9a33b58
11104 Author: Wolfgang Denk <wd@denx.de>
11105 Date: Mon Aug 13 21:57:53 2007 +0200
11107 Minor coding style cleanup. Update CHANGELOG.
11109 Signed-off-by: Wolfgang Denk <wd@denx.de>
11111 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
11112 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
11113 Date: Sat Aug 11 06:54:58 2007 -0500
11115 Modify SBC8641D to use new Freescale PCI routines
11117 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
11120 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
11121 Signde-off-by: Jon Loeliger <jdl@freescale.com>
11123 commit a08458303e7f9db67f296980036d3292c35cb45c
11124 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11125 Date: Fri Jun 29 18:38:51 2007 +0200
11127 atmel_mci: Fix data timeout value
11129 Calculate the data timeout based on values from the CSD instead of
11130 just using a hardcoded DTOR value. This is a backport of a similar fix
11131 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
11134 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11136 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
11137 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11138 Date: Mon Aug 13 17:22:31 2007 +0200
11140 AVR32: Include <div64.h> instead of <asm/div64.h>
11142 include/asm-avr32/div64.h was recently moved to include/div64.h, but
11143 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
11144 the patch was merged perhaps?)
11146 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
11149 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11151 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
11152 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11153 Date: Wed Jun 27 13:34:26 2007 +0200
11155 atmel_mci: Use 512 byte blocksize if possible
11157 Instead of always using the largest blocksize the card supports, check
11158 if it can support smaller block sizes and use 512 bytes if possible.
11159 Most cards do support this, and other parts of u-boot seem to have
11160 trouble with block sizes different from 512 bytes.
11162 Also enable underrun/overrun protection.
11164 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11165 Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
11167 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
11168 Author: Stefan Roese <sr@denx.de>
11169 Date: Mon Aug 13 09:05:33 2007 +0200
11171 ppc4xx: Fix problem in PLL clock calculation
11173 This patch was originall provided by David Mitchell <dmitchell@amcc.com>
11174 and fixes a bug in the PLL clock calculation.
11176 Signed-off-by: Stefan Roese <sr@denx.de>
11178 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
11179 Author: Wolfgang Denk <wd@denx.de>
11180 Date: Sun Aug 12 21:34:50 2007 +0200
11184 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
11185 Author: Wolfgang Denk <wd@denx.de>
11186 Date: Sun Aug 12 21:34:34 2007 +0200
11188 Minor alignment of output, 2nd try.
11189 Also update CHANGELOG
11191 Signed-off-by: Wolfgang Denk <wd@denx.de>
11193 commit 6b309f22a724fad8418e811751a0741b893419cf
11194 Author: Wolfgang Denk <wd@denx.de>
11195 Date: Sun Aug 12 20:35:49 2007 +0200
11197 Minor alignment of output
11199 Signed-off-by: Wolfgang Denk <wd@denx.de>
11201 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
11202 Author: Wolfgang Denk <wd@denx.de>
11203 Date: Sun Aug 12 18:28:18 2007 +0200
11205 Cleanup output on ADS5121 board
11207 Signed-off-by: Wolfgang Denk
11209 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
11210 Author: Wolfgang Denk <wd@denx.de>
11211 Date: Sun Aug 12 15:11:38 2007 +0200
11213 Adapt board configuration and fix kernel crash on MCC200 board.
11215 The update procedure was modified to turn off the USB subsystem
11216 before exit for MCC200 and TRAB. This is necessary as otherwise the
11217 USB controller continues to write periodically to system memory!
11219 MCC200-specific notes:
11220 - the patch disables the magic key check for MCC200
11221 - the patch contains the configuration changes made
11222 for the new revision of the board.
11224 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
11225 Signed-off-by: Wolfgang Denk <wd@denx.de>
11227 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
11228 Author: Wolfgang Denk <wd@denx.de>
11229 Date: Sun Aug 12 14:47:54 2007 +0200
11231 Adjust default configuration of ADS5121 board.
11233 Signed-off-by: Wolfgang Denk <wd@denx.de>
11235 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
11236 Author: Wolfgang Denk <wd@denx.de>
11237 Date: Sun Aug 12 14:27:39 2007 +0200
11239 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
11241 Signed-off-by: Wolfgang Denk <wd@denx.de>
11243 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
11244 Author: Gerald Van Baren <vanbaren@cideas.com>
11245 Date: Tue Aug 7 21:14:22 2007 -0400
11247 Improve error print messages.
11249 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11251 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
11252 Author: Kim Phillips <kim.phillips@freescale.com>
11253 Date: Tue Jul 17 13:57:04 2007 -0500
11255 fdt: allow for builds that don't want env and bd_t nodes
11257 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
11260 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11262 commit 91148bf7aeba142d6f348805db7625db7da64d6f
11263 Author: Kim Phillips <kim.phillips@freescale.com>
11264 Date: Tue Jul 17 13:56:53 2007 -0500
11266 fdt: do board setup based on fdt address specified on bootm line
11268 The last fdt patch to bootm did board setup based on the address
11269 specified by a prior fdt address command invocation. The bootm
11270 code, as its call to fdt_chosen does, should use the fdt specified
11271 by the user on the bootm command. Note this restores full
11272 functionality for the 8360's existing default boot environment
11273 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
11274 before booting a kernel).
11276 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11278 commit e125a2ffc209dd34794e326c7175658253beadf3
11279 Author: Gerald Van Baren <vanbaren@cideas.com>
11280 Date: Tue Jul 10 20:40:39 2007 -0400
11282 Call ft_board_setup() from the bootm command.
11284 In the patch titled "Create new fdt boardsetup command..." I removed the
11285 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
11286 to add a direct call back into cmd_bootm.c
11288 This fixes the oversight by adding the direct call to the bootm command.
11290 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11292 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
11293 Author: Gerald Van Baren <vanbaren@cideas.com>
11294 Date: Mon Jun 25 23:25:28 2007 -0400
11296 Create new fdt boardsetup command, fix bug parsing [] form of set values.
11298 Previously ft_board_setup() was called by fdt_chosen() which was not
11299 really correctly structured. This splits ft_board_setup() out by creating
11300 a new fdt boardsetup command.
11302 Fix a bug when parsing fdt set command values which have the square
11303 bracket form [00 11 22 33] - the length was updated incorrectly in when
11306 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11308 commit 6f35ded9e85493595e0eb66a82b502a95326d049
11309 Author: Gerald Van Baren <vanbaren@cideas.com>
11310 Date: Mon Jun 25 20:55:58 2007 -0400
11312 Tighten up the error messages.
11314 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11316 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
11317 Author: Gerald Van Baren <vanbaren@cideas.com>
11318 Date: Mon Jun 25 19:52:23 2007 -0400
11320 Asthetic improvements: error messages and line lengths.
11322 Tighten up the error messages, split overlength lines.
11324 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11326 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
11327 Author: Gerald Van Baren <vanbaren@cideas.com>
11328 Date: Fri May 25 22:08:57 2007 -0400
11330 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
11332 The fdt_chosen() function was adding/seting some properties ad-hoc
11333 improperly and duplicated (poorly) what was done in ft_board_setup()
11335 Clean up long lines (setting properties, printing errors).
11337 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11339 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
11340 Author: Gerald Van Baren <vanbaren@cideas.com>
11341 Date: Mon May 21 23:27:16 2007 -0400
11343 For fdt_find_node_by_path(), handle the root path properly.
11345 Also removes the special case root path detection in cmd_fdt.c since it
11346 is no longer necessary.
11348 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11350 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
11351 Author: Gerald Van Baren <vanbaren@cideas.com>
11352 Date: Thu May 17 23:54:36 2007 -0400
11354 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
11356 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
11357 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
11359 commit 1a861169bc3758f9de3aead62b058736c6891246
11360 Author: Gerald Van Baren <vanbaren@cideas.com>
11361 Date: Wed Jun 6 22:47:58 2007 -0400
11363 Replace fdt_node_offset() with fdt_find_node_by_path().
11365 The new name matches more closely the kernel's name, which is also
11366 a much better description.
11368 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
11369 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
11371 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
11372 Author: Gerald Van Baren <vanbaren@cideas.com>
11373 Date: Wed May 16 22:39:59 2007 -0400
11375 Fix cmd_fdt line lengths, refactor code.
11377 Break lines that were greater than 80 characters in length.
11378 Move the fdt print and property parsing code to separate static functions
11379 to reduce coding clutter in the fdt_cmd handling body.
11381 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11383 commit 25114033ab21788810c48ba4df103b649da1223b
11384 Author: Gerald Van Baren <vanbaren@cideas.com>
11385 Date: Sat May 12 09:47:25 2007 -0400
11387 FDT command improvements.
11389 Fix "fdt set" so that it will create a non-existing property.
11390 Add "fdt mknode" to create nodes.
11392 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11394 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
11395 Author: Gerald Van Baren <vanbaren@cideas.com>
11396 Date: Sat May 12 09:45:46 2007 -0400
11398 Reorganize and fix problems (returns) in the bootm command.
11400 Do *NOT* return after the "point of no return" has been passed.
11401 If something goes wrong, the board must be reset after that point.
11402 Move the "Transferring control to Linux" debug message back to where it
11403 belongs: just before transferring control to linux.
11405 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11407 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
11408 Author: Gerald Van Baren <vanbaren@cideas.com>
11409 Date: Tue May 8 21:27:35 2007 -0400
11411 Fix bugs in the CONFIG_OF_LIBFDT
11413 Stupid coding mistakes (identified by Timur Tabi, thanks).
11415 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11417 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
11418 Author: Gerald Van Baren <vanbaren@cideas.com>
11419 Date: Wed Apr 25 22:47:15 2007 -0400
11421 Improve fdt move length handling.
11423 Make the length parameter optional: if not specified, do the move using
11424 the current size unchanged.
11426 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11428 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
11429 Author: Gerald Van Baren <vanbaren@cideas.com>
11430 Date: Wed Apr 25 22:23:36 2007 -0400
11432 Minor code clean up.
11434 Declare the variable fdt properly as extern.
11435 Call the "set_fn" function pointer the "short way" without the full
11436 dereferencing syntax.
11438 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11440 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
11441 Author: Gerald Van Baren <vanbaren@cideas.com>
11442 Date: Wed Apr 25 21:24:27 2007 -0400
11444 Improve error messages, more informative.
11446 Print more than the raw libfdt error message strings. This is especially
11447 useful for cluing in the user when the bootm command aborts due to
11450 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11452 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
11453 Author: Gerald Van Baren <vanbaren@cideas.com>
11454 Date: Fri Apr 20 22:46:53 2007 -0400
11456 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
11458 This is the way u-boot reduces configured-out code. At Wolfgang
11459 Grandegger and Wolfgang Denk's request, make libfdt conform.
11461 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11463 commit 923efd286411ed052d9e074f59f8986d6081061c
11464 Author: Bruce Adler <bruce.adler@ccpu.com>
11465 Date: Fri Aug 10 14:54:47 2007 -0700
11467 add image size and descriptors for Spartan 3E FPGA chips
11469 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
11471 Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
11473 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
11474 Author: Kim Phillips <kim.phillips@freescale.com>
11475 Date: Fri Aug 10 15:34:48 2007 -0500
11477 make MAKEALL more immune to merge conflicts
11479 ..by placing board entries one per line, as suggested by jdl.
11481 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11483 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
11484 Author: Kim Phillips <kim.phillips@freescale.com>
11485 Date: Fri Aug 10 13:28:25 2007 -0500
11487 README: Remove outdated cpu type, board type, and NAME_config lists
11489 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11491 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
11492 Author: Dave Liu <r63238@freescale.com>
11493 Date: Fri Aug 10 15:48:59 2007 +0800
11495 mpc83xx: Suppress the warning 'burstlen'
11497 suppress the warning 'burstlen' of spd_sdram.
11499 Signed-off-by: Dave Liu <daveliu@freescale.com>
11501 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
11502 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
11503 Date: Thu Aug 9 15:11:03 2007 -0500
11505 Add support for SBC8641D. Config files.
11507 Add support for Wind River's SBC8641D reference board.
11509 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
11510 Acked-by: Wolfgang Denk <wd@denx.de>
11511 Acked-by: Jon Loeliger <jdl@freescale.com>
11513 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
11514 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
11515 Date: Thu Aug 9 15:10:53 2007 -0500
11517 Add support for SBC8641D. Board files.
11519 Add support for Wind River's SBC8641D reference board.
11521 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
11522 Acked-by: Wolfgang Denk <wd@denx.de>
11523 Acked-by: Jon Loeliger <jdl@freescale.com>
11525 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
11526 Author: Stefan Roese <sr@denx.de>
11527 Date: Fri Aug 10 20:34:58 2007 +0200
11529 Conding style cleanup
11531 Signed-off-by: Stefan Roese <sr@denx.de>
11533 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
11534 Author: Sergey Kubushyn <ksi@koi8.net>
11535 Date: Fri Aug 10 20:26:18 2007 +0200
11537 [ARM] TI DaVinci support, hopefully final
11539 Add support for the following DaVinci boards:
11546 - Split into separate board directories
11547 - Removed changes to MTD_DEBUG (or whatever it's called)
11548 - New CONFIG_CMD party line followed
11549 - Some cosmetic fixes, cleanup etc.
11550 - Patches against the latest U-Boot tree as of now.
11551 - Fixed CONFIG_CMD_NET in net files.
11552 - Fixed CONFIG_CMD_EEPROM for schmoogie.
11553 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
11554 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
11555 but it at least compiles.
11557 Here is an excerpt from session log on SCHMOOGIE...
11559 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
11568 ETH PHY : DP83848 @ 0x01
11570 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
11571 U-Boot > ping 192.168.253.10
11572 host 192.168.253.10 is alive
11575 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
11576 Acked-by: Dirk Behme <dirk.behme@gmail.com>
11577 Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
11578 Acked-by: Stefan Roese <sr@denx.de>
11580 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
11581 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
11582 Date: Fri Jul 27 01:50:45 2007 -0500
11584 fsl_pci_init cleanup.
11586 Do not enable normal errors created during probe (master abort, perr,
11587 and pcie Invalid Configuration access).
11589 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
11591 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
11592 Acked-by: Andy Fleming <afleming@freescale.com>
11594 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
11595 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
11596 Date: Fri Jul 27 01:50:44 2007 -0500
11598 pciauto_setup_device bars_num fix
11600 Passing bars_num=0 to pciauto_setup_device should assign no bars.
11602 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
11603 Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
11604 Acked-by: Andy Fleming <afleming@freescale.com>
11606 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
11607 Author: Jon Loeliger <jdl@freescale.com>
11608 Date: Mon Aug 6 17:39:44 2007 -0500
11610 8641hpcn: Do correct sized pointer math.
11612 When I rebased Ed's patch and cleaned up a few compilation
11613 problems, I apparently rebased my brain on crack first.
11614 Fix that by doing (char *) sized pointer math as needed.
11616 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11618 commit cfc7a7f5bb3273c9951173c788001d45118f141f
11619 Author: Jon Loeliger <jdl@freescale.com>
11620 Date: Thu Aug 2 14:42:20 2007 -0500
11624 Remove rev 1 fixes.
11625 Always set PICGCR_MODE.
11626 Enable machine check and provide board config option
11627 to set and handle SoC error interrupts.
11629 Include MSSSR0 in error message.
11631 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
11633 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
11634 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11636 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
11637 Author: Stefan Roese <sr@denx.de>
11638 Date: Fri Aug 10 10:42:25 2007 +0200
11640 Coding style cleanup
11642 Signed-off-by: Stefan Roese <sr@denx.de>
11644 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
11645 Author: Dirk Behme <dirk.behme@googlemail.com>
11646 Date: Thu Aug 2 17:42:08 2007 +0200
11648 Make use of generic 64bit division in nand_util.c
11650 Use generic 64bit division in nand_util.c. This makes nand_util.c
11651 independent of any toolchain 64bit division.
11653 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
11655 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
11656 Author: Dirk Behme <dirk.behme@googlemail.com>
11657 Date: Thu Aug 2 17:41:14 2007 +0200
11659 Move 64bit division from avr32 to generic lib
11661 Move the 64bit division from lib_avr32 to lib_generic. With this, all
11662 boards can do_div/__div64_32 if needed, not only avr one. Code is put
11663 to lib_generic, so no larger memory footprint if not used. No code
11664 modifications. Thanks for proposal by Håvard Skinnemoen.
11666 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
11668 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
11669 Author: Niklaus Giger <niklausgiger@gmx.ch>
11670 Date: Fri Jul 27 11:31:22 2007 +0200
11672 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
11674 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
11676 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
11677 Author: Niklaus Giger <niklausgiger@gmx.ch>
11678 Date: Fri Jul 27 11:30:33 2007 +0200
11680 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
11682 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
11684 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
11685 Author: Niklaus Giger <niklausgiger@gmx.ch>
11686 Date: Fri Jul 27 11:38:26 2007 +0200
11688 Add PPC4xx-HCU4 and HCU5 boards: common files
11690 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
11692 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
11693 Author: Niklaus Giger <niklausgiger@gmx.ch>
11694 Date: Fri Jul 27 11:28:44 2007 +0200
11696 Add PPC4xx-HCU4 and HCU5 boards: make related
11698 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
11700 commit 137fdd9f474ecb853efdace5200576308c67f18d
11701 Author: Niklaus Giger <niklausgiger@gmx.ch>
11702 Date: Fri Jul 27 11:28:03 2007 +0200
11704 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
11706 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
11708 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
11709 Author: Niklaus Giger <niklausgiger@gmx.ch>
11710 Date: Fri Jul 27 11:27:15 2007 +0200
11712 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
11714 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
11716 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
11717 Author: Niklaus Giger <niklausgiger@gmx.ch>
11718 Date: Fri Jul 27 11:25:31 2007 +0200
11720 Add PPC4xx-HCU4 and HCU5 boards: READMEs
11722 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
11724 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
11725 Author: Niklaus Giger <niklausgiger@gmx.ch>
11726 Date: Fri Jul 27 11:37:40 2007 +0200
11728 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
11730 This series of patches adds support for 2 boards from Netstal Maschinen.
11732 The HCU4 has a PPC405Gpr and
11733 the HCU5 has a PPC440EPX.
11735 The HCU4 has a somehow complicated flash setup, as the booteprom is
11736 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
11739 The HCU5 has only a booteprom as the whole code will be downloaded from a
11740 different board which has HD, CD-ROM, etc and where all code is stored.
11742 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
11745 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
11747 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
11748 Author: Stefan Roese <sr@denx.de>
11749 Date: Fri Aug 10 08:42:55 2007 +0200
11751 ppc4xx: Update lwmon5 POST configuration
11753 Signed-off-by: Stefan Roese <sr@denx.de>
11755 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
11756 Author: Yuri Tikhonov <yur@emcraft.com>
11757 Date: Fri Aug 10 08:25:22 2007 +0200
11759 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
11761 The patch adds support for UART POST on ppc44x-based boards with no
11762 external serial clocks installed.
11764 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
11765 Acked-by: Stefan Roese <sr@denx.de>
11767 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
11768 Author: Kim Phillips <kim.phillips@freescale.com>
11769 Date: Mon Aug 6 18:18:34 2007 -0500
11771 mpc83xx: fix ITX[GP] O=builddir builds
11773 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
11775 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
11776 "BUILD_DIR=<some dir> ./MAKEALL ..."
11778 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11780 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
11781 Author: Dave Liu <r63238@freescale.com>
11782 Date: Wed Aug 1 15:00:59 2007 +0800
11784 mpc83xx: Correct the README for DDR ECC
11786 Update the README for DDR ECC, change the name
11787 to README.mpc83xx.ddrecc.
11789 Signed-off-by: Dave Liu <daveliu@freescale.com>
11790 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11792 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
11793 Author: Dave Liu <r63238@freescale.com>
11794 Date: Wed Aug 1 15:00:15 2007 +0800
11796 mpc83xx: Consolidate the ECC support of 83xx
11798 Remove the duplicated source code of ecc command on the <board>.c,
11799 for reused, move these code to cpu/mpc83xx directory.
11801 Signed-off-by: Dave Liu <daveliu@freescale.com>
11802 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11804 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
11805 Author: Dave Liu <r63238@freescale.com>
11806 Date: Sat Aug 4 13:37:39 2007 +0800
11808 mpc83xx: Correct the burst length for DDR2 with 32 bits
11810 The burst length should be 4 for DDR2 with 32 bits bus
11812 Signed-off-by: Dave Liu <daveliu@freescale.com>
11814 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
11815 Author: Kim Phillips <kim.phillips@freescale.com>
11816 Date: Wed Jul 25 19:25:33 2007 -0500
11818 mpc83xx: add support for the MPC8323E RDB
11820 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
11821 five 10/100 ethernet ports connected via an ICPlus IP175C
11822 switch, one PCI slot, and serial. Features not supported
11823 in this patch are SD card interface, 2 USB ports, and the
11826 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
11827 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11829 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
11830 Author: Kim Phillips <kim.phillips@freescale.com>
11831 Date: Wed Jul 25 19:25:28 2007 -0500
11833 mpc83xx: fixup generic pci for libfdt
11835 add libfdt support to the generic 83xx pci code
11837 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11839 commit f57ac7a7b37109245b69db80839ebee26179966a
11840 Author: Kim Phillips <kim.phillips@freescale.com>
11841 Date: Wed Jul 25 19:25:22 2007 -0500
11843 mpc83xx: fix 8360 and cpu functions to update fdt being passed
11845 ..and not the global fdt. Rename local fdt vars to blob so as not to
11846 be confused with the global var with the same three-letter name.
11848 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11850 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
11851 Author: Jerry Van Baren <gvb.uboot@gmail.com>
11852 Date: Wed Jul 4 21:34:24 2007 -0400
11854 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
11856 Several node strings were not correct (trailing slashes and properties
11858 Added setting of the timebase-frequency.
11859 Improved error messages and use debug() instead of printf().
11861 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11862 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11864 commit 26d02c9bbac1751c5e19294f000100b48d43a920
11865 Author: Jerry Van Baren <gvb.uboot@gmail.com>
11866 Date: Wed Jul 4 21:27:30 2007 -0400
11868 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
11870 The new name matches more closely the kernel's name, which is also
11871 a much better description.
11873 These are the mpc83xx changes made necessary by the function name change.
11875 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
11876 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
11877 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11879 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
11880 Author: Dave Liu <daveliu@freescale.com>
11881 Date: Mon Jun 25 10:41:56 2007 +0800
11883 mpc83xx: Add support for the display of reset status
11885 83xx processor family has many reset sources, such as
11886 power on reset, software hard reset, software soft reset,
11887 JTAG, bus monitor, software watchdog, check stop reset,
11888 external hard reset, external software reset.
11889 sometimes, to figure out the fault of system, we need to
11890 know the cause of reset early before the prompt of
11893 Signed-off-by: Dave Liu <daveliu@freescale.com>
11894 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11896 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
11897 Author: Dave Liu <daveliu@freescale.com>
11898 Date: Mon Jun 25 10:41:04 2007 +0800
11900 mpc83xx: Fix the align bug of SDMA buffer
11902 According to the latest user manual, the SDMA temporary
11903 buffer base address must be 4KB aligned.
11905 Signed-off-by: Dave Liu <daveliu@freescale.com>
11906 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11908 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
11909 Author: Dave Liu <daveliu@freescale.com>
11910 Date: Mon Jun 25 13:21:12 2007 +0800
11912 mpc83xx: Revise the MPC8360EMDS readme doc
11914 When the rev2.x silicon mount on the MPC8360EMDS baord,
11915 and if you are using the u-boot version after the commit
11916 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
11917 to make the ethernet interface usable, we have to setup
11918 the jumpers correctly.
11920 Signed-off-by: Dave Liu <daveliu@freescale.com>
11921 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11923 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
11924 Author: Timur Tabi <timur@freescale.com>
11925 Date: Tue Jul 3 13:46:32 2007 -0500
11927 FSL I2C driver programs the two I2C busses differently
11929 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
11930 The second I2C bus has its slave address programmed incorrectly and is
11931 missing a 5-us delay.
11933 Signed-off-by: Timur Tabi <timur@freescale.com>
11934 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11936 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
11937 Author: Timur Tabi <timur@freescale.com>
11938 Date: Tue Jul 3 13:04:34 2007 -0500
11940 Update SCCR programming in cpu_init_f() to support all 83xx processors
11942 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
11943 bitfields for all 83xx processors. The code to update some bitfields was
11944 compiled only on some processors. Now, the bitfields are programmed as long
11945 as the corresponding CFG_SCCR option is defined in the board header file.
11946 This means that the board header file should not define any CFG_SCCR macros
11947 for bitfields that don't exist on that processor, otherwise the SCCR will be
11948 programmed incorrectly.
11950 Signed-off-by: Timur Tabi <timur@freescale.com>
11951 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11953 commit 9546266999f0b9b51372636614211b88d90f0f25
11954 Author: Martin Krause <martin.krause@tqs.de>
11955 Date: Fri Jun 22 13:04:22 2007 +0200
11957 TQM834x: cleanup configuraton
11959 Remove irritating #undef DEBUG
11961 Signed-off-by: Martin Krause <martin.krause@tqs.de>
11962 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11964 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
11965 Author: david.saada <David.Saada@ecitele.com>
11966 Date: Mon Jun 18 09:09:53 2007 -0700
11968 MPC83xx: Fix makefile to generate config.h file in the build directory
11970 MPC83xx: Fix the Makefile config sections to generate the include/config.h
11971 file in the build directory instead of the source directory.
11973 Signed-off-by: David Saada <david.saada@ecitele.com>
11974 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11976 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
11977 Author: Lee Nipper <Lee.Nipper@freescale.com>
11978 Date: Thu Jun 14 20:07:33 2007 -0500
11980 mpc83xx: Add support for 8360 silicon revision 2.1
11982 This change adds 8360 silicon revision 2.1 support to u-boot.
11984 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
11985 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11987 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
11988 Author: Kumar Gala <galak@kernel.crashing.org>
11989 Date: Wed Aug 8 04:14:28 2007 -0500
11991 Treat ppc64 host as ppc
11993 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11995 commit 0dc4279b08ff82472bec2e2c90858602459febe8
11996 Author: Jason Jin <Jason.jin@freescale.com>
11997 Date: Wed Aug 8 09:01:46 2007 +0800
11999 Minor fix for bios emulator makefile
12001 Add $(obj) to LIB avoiding objects be built in the source dir
12003 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12005 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
12006 Author: Jason Jin <Jason.jin@freescale.com>
12007 Date: Wed Aug 8 08:33:11 2007 +0800
12009 Add CONFIG_BIOSEMU define to guard all the bios emulator code
12011 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12013 This patch fix the compile issue on the board that did not enable the bios emulator
12015 commit ed8106433522f2ea8933e9808346860d061d7731
12016 Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
12017 Date: Tue Jul 31 12:27:25 2007 -0500
12019 tsec: fix multiple PHY support
12021 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
12022 broke multiple PHY support in tsec.c. This fixes it.
12024 Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
12025 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12027 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
12028 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
12029 Date: Thu Aug 9 09:08:18 2007 -0500
12031 tsec: Allow Ten Bit Interface address to be configurable
12033 Allow the address of the Ten Bit Interface (TBI) to be changed in the
12034 event of a conflict with another device.
12036 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
12038 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
12039 Author: Stefan Roese <sr@denx.de>
12040 Date: Wed Aug 8 09:54:26 2007 +0200
12042 Coding style cleanup
12044 Signed-off-by: Stefan Roese <sr@denx.de>
12046 commit a41de1f0d373e09c782dea558385a06247111ba5
12047 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12048 Date: Sun Aug 5 05:15:18 2007 -0500
12050 Port enabled for I2C signals and chipselects port configuration.
12052 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12054 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
12055 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12056 Date: Sun Aug 5 04:31:18 2007 -0500
12060 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12062 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
12063 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12064 Date: Sun Aug 5 04:11:20 2007 -0500
12068 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12070 commit 99c03c175d2689093176facf17c58ce2cb320001
12071 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12072 Date: Sun Aug 5 03:58:52 2007 -0500
12074 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
12076 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12078 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
12079 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12080 Date: Sun Aug 5 03:55:21 2007 -0500
12082 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
12084 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12086 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
12087 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12088 Date: Sun Aug 5 03:43:30 2007 -0500
12090 Moved sync() from board file to include/asm-m68k/io.h
12092 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12094 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
12095 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12096 Date: Sun Aug 5 03:30:44 2007 -0500
12098 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
12100 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12102 commit 9998bd37ead85e93953559720710d3b0685c81e6
12103 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12104 Date: Sun Aug 5 03:19:10 2007 -0500
12106 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
12108 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12110 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
12111 Author: Jason Jin <Jason.jin@freescale.com>
12112 Date: Tue Aug 7 16:17:06 2007 +0800
12114 Add CONFIG_BIOSEMU define to guard all the bios emulator code
12116 This patch fix the compile issue on the board that did not enable the bios emulator
12118 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
12119 Author: Wolfgang Denk <wd@denx.de>
12120 Date: Tue Aug 7 16:02:13 2007 +0200
12122 Fix missing brace error in fs/fat/fat.c
12123 [pointed out by Roderik Wildenburg]
12125 Signed-off-by: Wolfgang Denk <wd@denx.de>
12127 commit 706714d97a0d08d59eda4de2268c39f504688329
12128 Author: Michal Simek <monstr@monstr.eu>
12129 Date: Mon Aug 6 23:41:53 2007 +0200
12131 [FIX] remove cute code
12133 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
12134 Author: Michal Simek <monstr@monstr.eu>
12135 Date: Mon Aug 6 23:35:26 2007 +0200
12137 [FIX] Fix romfs code
12139 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
12140 Author: Michal Simek <monstr@monstr.eu>
12141 Date: Mon Aug 6 23:31:49 2007 +0200
12143 [FIX] Coding style cleanup - Wolfgang's suggestions
12145 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
12146 Author: Wolfgang Denk <wd@denx.de>
12147 Date: Mon Aug 6 23:21:05 2007 +0200
12149 Fixed typo in README (pointed out by Martin Jost).
12151 Signed-off-by: Wolfgang Denk <wd@denx.de>
12153 commit 537223afa61f64480df31ce440a9cb386df4a814
12154 Author: Stefan Roese <sr@denx.de>
12155 Date: Mon Aug 6 21:10:17 2007 +0200
12157 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
12159 As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
12160 here an updated Bamboo README.
12162 Signed-off-by: Stefan Roese <sr@denx.de>
12164 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
12165 Author: Wolfgang Denk <wd@denx.de>
12166 Date: Mon Aug 6 02:17:36 2007 +0200
12168 Coding style cleanup. Update CHANGELOG.
12170 Signed-off-by: Wolfgang Denk <wd@denx.de>
12172 commit 221838cc7eb178370ff62aa05920a582e12ac322
12173 Author: Jason Jin <Jason.jin@freescale.com>
12174 Date: Tue Jul 10 09:03:22 2007 +0800
12176 Remove the bios emulator from MAI board.
12178 The bios emulator in the MAI board can not pass compile
12179 and have a lot of crap in it. remove it and will have a
12180 clean and small bios emulator in the drivers directory
12181 which can be uesed for every board.
12183 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12185 commit 5618332409bb96f4448d1712899369fc80c0b489
12186 Author: Jason Jin <Jason.jin@freescale.com>
12187 Date: Fri Jul 13 12:14:59 2007 +0800
12189 Fix some compile issues for MAI board.
12191 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12193 commit 0f460a1ee148b648ee242c3157650287d4296260
12194 Author: Jason Jin <Jason.jin@freescale.com>
12195 Date: Fri Jul 13 12:14:58 2007 +0800
12197 Configurations for ATI video card BIOS emulator
12199 This patch add definition of the BIOS emulator and the ATI framebuffer
12200 driver for MPC8641HPCN board.
12202 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12203 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
12205 commit ece92f85053b8df613edcf05b26a416cbc3d629c
12206 Author: Jason Jin <Jason.jin@freescale.com>
12207 Date: Fri Jul 6 08:34:56 2007 +0800
12209 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
12210 ATI video card BIOS. and can be used for x86 code emulation by some
12213 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12215 commit 5072188acabde3178fac7f5a597150e6e74fd40c
12216 Author: Jason Jin <Jason.jin@freescale.com>
12217 Date: Fri Jul 6 08:33:33 2007 +0800
12219 This is a framebuffer driver for ATI video card, can work for PCI9200,
12220 X300, X700, X800 ATI video cards.
12222 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
12223 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12225 commit 5728be389e65fd47f34b33c2596271eb4db751ae
12226 Author: Wolfgang Denk <wd@denx.de>
12227 Date: Mon Aug 6 01:01:49 2007 +0200
12229 Coding style cleanup. Update CHANGELOG.
12231 Signed-off-by: Wolfgang Denk <wd@denx.de>
12233 commit 8092fef4c29b395958bb649647da7e3775731517
12234 Author: Martin Krause <Martin.Krause@tqs.de>
12235 Date: Tue Dec 12 14:26:01 2006 +0100
12237 Add functions to list of exported functions
12239 Additionally export the following fuctions (to make trab_config build again):
12243 Also bump the ABI version to reflect this change
12245 Signed-off-by: Martin Krause <martin.krause@tqs.de>
12247 commit 63cec5814fab5d2b1c86982327433807a5ac0249
12248 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12249 Date: Thu Aug 2 14:09:49 2007 -0500
12251 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
12253 All of the PCI/PCI-Express driver and initialization code that
12254 was in the MPC8641HPCN port has now been moved into the common
12255 drivers/fsl_pci_init.c. In a subsequent patch, this will be
12256 utilized by the 85xx ports as well.
12258 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
12260 Also enable the second PCI-Express controller on 8641
12261 by getting its BATS and CFG_ setup right.
12263 Fixed a u16 vendor compiler warning in AHCI driver too.
12265 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12266 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
12267 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12269 commit a274ca4f6d68830e7c916f897561cff8c4101c38
12270 Author: Michal Simek <monstr@monstr.eu>
12271 Date: Sun Aug 5 22:33:05 2007 +0200
12273 [FIX] Coding style cleanup
12275 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
12276 Author: Michal Simek <monstr@monstr.eu>
12277 Date: Sun Aug 5 16:13:31 2007 +0200
12279 [FIX] Xilinx Uartlite driver
12280 Because PPC405 can use UARTLITE serial interface and
12281 Microblaze can use Uart16550 serial interface not only Uartlite.
12283 commit 98889edd50aadf862071eb5664747ad0d568a20e
12284 Author: Michal Simek <monstr@monstr.eu>
12285 Date: Sun Aug 5 15:54:53 2007 +0200
12287 [FIX] Change configuration for XUPV2P Microblaze board
12289 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
12290 Author: Michal Simek <monstr@monstr.eu>
12291 Date: Sun Aug 5 15:53:50 2007 +0200
12293 [PATCH] Added support for Xilinx Emac community driver
12295 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
12296 Author: Bartlomiej Sieka <tur@semihalf.com>
12297 Date: Fri Aug 3 12:08:16 2007 +0200
12299 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
12301 Add the ability for modules from the Schindler cm5200 family to use a
12302 single U-Boot image:
12303 - rename cm1_qp1 to cm5200
12304 - add run-time module detection
12305 - parametrize SDRAM configuration according to the module we are running on
12307 Few minor, board-specific fixes included in this patch:
12308 - better MAC address handling
12309 - updated default environment ('update' command uses +{filesize} now)
12310 - improved error messages in the auto-update code
12311 - allow booting U-Boot from RAM (CFG_RAMBOOT)
12313 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
12314 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
12315 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
12317 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
12318 Author: Andy Fleming <afleming@freescale.com>
12319 Date: Fri Aug 3 04:05:25 2007 -0500
12321 Add Marvell 1149 PHY support to the TSEC
12323 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
12324 Author: Wolfgang Denk <wd@denx.de>
12325 Date: Thu Aug 2 21:27:46 2007 +0200
12327 Coding style cleanup, update CHANGELOG
12329 Signed-off-by: Wolfgang Denk <wd@denx.de>
12331 commit 63e22764d2f8653f68888c667eb65b3996b52680
12332 Author: Wolfgang Denk <wd@denx.de>
12333 Date: Thu Aug 2 10:11:18 2007 +0200
12335 Minor cleanup of <board>_nand build rules.
12337 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
12338 Author: Stefan Roese <sr@denx.de>
12339 Date: Thu Aug 2 08:33:56 2007 +0200
12341 ppc4xx: Code cleanup
12343 Signed-off-by: Stefan Roese <sr@denx.de>
12345 commit c92409812206ac67a7fa7aae298539a9c3804a46
12346 Author: Grzegorz Bernacki <gjb@semihalf.com>
12347 Date: Tue Jul 31 18:51:48 2007 +0200
12349 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
12351 During config transactions on the PCIe bus an attempt to scan for a
12352 non-existent device can lead to a machine check exception with certain
12353 peripheral devices. In order to avoid crashing in such scenarios the
12354 instrumented versions of the config cycle read routines are introduced, so
12355 the exceptions fixups framework can gracefully recover.
12357 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
12358 Acked-by: Rafal Jaworowski <raj@semihalf.com>
12360 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
12361 Author: Rafal Jaworowski <raj@semihalf.com>
12362 Date: Tue Jul 31 18:19:54 2007 +0200
12364 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
12366 This brings back separate settings for PCIe bus numbers depending on chip
12367 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
12368 commit. 440SPe rev. A does NOT work properly with the same settings as for
12369 the rev. B (no devices are seen on the bus during enumeration).
12371 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
12373 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
12374 Author: Wolfgang Denk <wd@denx.de>
12375 Date: Thu Aug 2 00:48:45 2007 +0200
12377 Fix build errors and warnings / code cleanup.
12379 Signed-off-by: Wolfgang Denk <wd@denx.de>
12381 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
12382 Author: Eugene OBrien <eugene.obrien@advantechamt.com>
12383 Date: Tue Jul 31 10:24:56 2007 +0200
12385 ppc4xx: Update AMCC Bamboo 440EP support
12387 Changed storage type of cfg_simulate_spd_eeprom to const
12388 Changed storage type of gpio_tab to stack storage
12389 (Cannot access global data declarations in .bss until afer code relocation)
12391 Improved SDRAM tests to catch problems where data is not uniquely addressable
12392 (e.g. incorrectly programmed SDRAM row or columns)
12394 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
12395 Fixed AM29LV320DT (OpCode Flash) sector map
12397 Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
12398 Signed-off-by: Stefan Roese <sr@denx.de>
12400 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
12401 Author: Stefan Roese <sr@denx.de>
12402 Date: Tue Jul 31 08:37:01 2007 +0200
12404 ppc4xx: Update 440EPx lwmon5 board support
12406 - Clear ECC status regs after ECC POST test
12407 - Set dcbz for ECC generation with caches enabled as default
12410 Signed-off-by: Stefan Roese <sr@denx.de>
12412 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
12413 Author: Stefan Roese <sr@denx.de>
12414 Date: Mon Jul 30 11:04:57 2007 +0200
12416 ppc4xx: Only print ECC related info when the error bis are set
12418 Signed-off-by: Stefan Roese <sr@denx.de>
12420 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
12421 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12422 Date: Fri Jul 27 16:44:31 2007 +0200
12424 new FPGA image for PLU405 board
12426 new FPGA image for PLU405 board with improved CompactFlash timing
12428 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12430 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
12431 Author: Rafal Jaworowski <raj@semihalf.com>
12432 Date: Fri Jul 27 14:43:59 2007 +0200
12434 [ADS5121] Support for the ADS5121 board
12436 The following MPC5121e subsystems are supported:
12438 - low-level CPU init
12439 - NOR Boot Flash (common CFI driver)
12445 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
12446 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
12447 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
12449 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
12450 Author: Rafal Jaworowski <raj@semihalf.com>
12451 Date: Fri Jul 27 14:22:04 2007 +0200
12453 [PPC] Remove unused MSR_USER definition
12455 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
12457 commit d4024bb72dd81695ec099b2199eda0d27c623e62
12458 Author: John Otken <john@softadvances.com>
12459 Date: Thu Jul 26 17:49:11 2007 +0200
12461 ppc4xx: Add support for AMCC 405EP Taihu board
12463 Signed-off-by: John Otken <john@softadvances.com>
12465 commit b66091de6c7390620312c2501db23d8391e7cabb
12466 Author: Anatolij Gustschin <agust@denx.de>
12467 Date: Thu Jul 26 15:08:01 2007 +0200
12469 ppc4xx: lwmon5: Update Lime initialization
12471 Change Lime SDRAM initialization to now support 100MHz and
12472 133MHz (if enabled). Also the framebuffer is initialized to
12473 display a blue rectangle with a white border.
12475 Signed-off-by: Anatolij Gustschin <agust@denx.de>
12476 Signed-off-by: Stefan Roese <sr@denx.de>
12478 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
12479 Author: Stefan Roese <sr@denx.de>
12480 Date: Tue Jul 24 09:52:52 2007 +0200
12482 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
12484 The used Intel NOR FLASH chips have internally two dies, and are now
12485 treated as two seperate chips.
12487 Signed-off-by: Stefan Roese <sr@denx.de>
12489 commit aedf5bde179ecfbd0a96130d18996a96518b785f
12490 Author: Stefan Roese <sr@denx.de>
12491 Date: Tue Jul 24 07:20:09 2007 +0200
12493 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
12495 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
12496 interrupt controller.
12498 Signed-off-by: Stefan Roese <sr@denx.de>
12500 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
12501 Author: Stefan Roese <sr@denx.de>
12502 Date: Fri Jul 20 15:03:44 2007 +0200
12504 ppc4xx: Fix bug with default GPIO output value
12506 As spotted by Matthias Fuchs, the default output values for all GPIO1
12507 outputs were not setup correctly. This patch fixes this issue.
12509 Signed-off-by: Stefan Roese <sr@denx.de>
12511 commit 531e3e8b831f357056448fa573137d5fb37000fd
12512 Author: Pavel Kolesnikov <concord@emcraft.com>
12513 Date: Fri Jul 20 15:03:03 2007 +0200
12515 POST: Add ECC POST for the lwmon5 board
12517 This patch adds ECC Post test for the Lwmon5 board based
12518 on PPC440EPx to U-Boot.
12520 Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
12521 Acked-by: Yuri Tikhonov <yur@emcraft.com>
12522 Acked-by: Stefan Roese <sr@denx.de>
12524 commit cc3023b9f95d7ac959a764471a65001062aecf41
12525 Author: Rafal Jaworowski <raj@semihalf.com>
12526 Date: Thu Jul 19 17:12:28 2007 +0200
12528 Fix breakage of 8xx boards from recent commit.
12530 This patch fixes the negative consequences for 8xx of the recent
12531 "ppc4xx: Clean up 440 exceptions handling" commit.
12533 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
12535 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
12536 Author: Stefan Roese <sr@denx.de>
12537 Date: Mon Jul 16 13:11:12 2007 +0200
12539 Coding style cleanup
12541 Signed-off-by: Stefan Roese <sr@denx.de>
12543 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
12544 Author: Stefan Roese <sr@denx.de>
12545 Date: Mon Jul 16 10:02:12 2007 +0200
12547 ppc4xx: Code cleanup
12549 Signed-off-by: Stefan Roese <sr@denx.de>
12551 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
12552 Author: Stefan Roese <sr@denx.de>
12553 Date: Mon Jul 16 10:01:38 2007 +0200
12555 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
12557 Signed-off-by: Stefan Roese <sr@denx.de>
12559 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
12560 Author: Stefan Roese <sr@denx.de>
12561 Date: Mon Jul 16 10:00:43 2007 +0200
12563 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
12565 The new boardspecific DDR2 controller configuration is used for the Yucca
12566 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
12568 Signed-off-by: Stefan Roese <sr@denx.de>
12570 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
12571 Author: Stefan Roese <sr@denx.de>
12572 Date: Mon Jul 16 09:57:00 2007 +0200
12574 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
12576 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
12577 support non default, boardspecific DDR(2) controller configuration.
12579 Signed-off-by: Stefan Roese <sr@denx.de>
12581 commit 5743a9207a370b90f09b20ebd61167c806b937f3
12582 Author: Stefan Roese <sr@denx.de>
12583 Date: Mon Jul 16 08:53:51 2007 +0200
12585 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
12587 The new function remove_tlb() can be used to remove the TLB's used to
12588 map a specific memory region. This is especially useful for the DDR(2)
12589 setup routines which configure the SDRAM area temporarily as a cached
12590 area (for speedup on auto-calibration and ECC generation) and later
12591 need this area uncached for normal usage.
12593 Signed-off-by: Stefan Roese <sr@denx.de>
12595 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
12596 Author: Michal Simek <monstr@monstr.eu>
12597 Date: Mon Jul 16 00:31:07 2007 +0200
12599 [PATCH] Support for Xilinx EmacLite controller
12601 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
12602 Author: Wolfgang Denk <wd@denx.de>
12603 Date: Sat Jul 14 22:51:02 2007 +0200
12607 Signed-off-by: Wolfgang Denk <wd@denx.de>
12609 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
12610 Author: Michal Simek <monstr@monstr.eu>
12611 Date: Sat Jul 14 13:11:28 2007 +0200
12613 [FIX] support for simply measuring time
12615 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
12616 Author: Michal Simek <monstr@monstr.eu>
12617 Date: Sat Jul 14 12:41:23 2007 +0200
12619 [FS] Added support for ROMFS
12621 commit 011595307731a7a67a7445d107c279d031e8ab97
12622 Author: Heiko Schocher <hs@pollux.denx.de>
12623 Date: Sat Jul 14 01:06:58 2007 +0200
12625 [PCS440EP] - fix compile error, if BUILD_DIR is used
12627 commit 5a2f1098d81ad58b309e5e558d0492643166a799
12628 Author: Michal Simek <monstr@monstr.eu>
12629 Date: Sat Jul 14 00:18:48 2007 +0200
12631 [PATCH] Support time without timer
12633 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
12634 Author: Michal Simek <monstr@monstr.eu>
12635 Date: Fri Jul 13 21:43:55 2007 +0200
12637 [PATCH] Remove problem with disabled BARREL SHIFTER
12639 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
12640 Author: Michal Simek <monstr@monstr.eu>
12641 Date: Fri Jul 13 21:41:44 2007 +0200
12643 [FIX] correct help for rspr
12645 commit fad63407154f46246ce80d53a9c669a44362ac67
12646 Author: Heiko Schocher <hs@pollux.denx.de>
12647 Date: Fri Jul 13 09:54:17 2007 +0200
12649 make show_boot_progress () weak.
12651 Signed-off-by: Heiko Schocher <hs@denx.de>
12653 commit 907902472391b6ca1876ec300687562ecaf459b1
12654 Author: Heiko Schocher <hs@pollux.denx.de>
12655 Date: Fri Jul 13 08:26:05 2007 +0200
12657 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
12658 - fix compile error, if BUILD_DIR is used
12660 Signed-off-by: Heiko Schocher <hs@denx.de>
12662 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
12663 Author: Stefan Roese <sr@denx.de>
12664 Date: Thu Jul 12 16:32:08 2007 +0200
12666 ppc4xx: Change receive buffer handling in the 4xx emac driver
12668 This change fixes a bug in the receive buffer handling, that
12669 could lead to problems upon high network traffic (broadcasts...).
12671 Signed-off-by: Stefan Roese <sr@denx.de>
12673 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
12674 Author: Wolfgang Denk <wd@denx.de>
12675 Date: Thu Jul 12 01:45:34 2007 +0200
12677 Update CHANGELOG, minor coding style cleanup.
12679 Signed-off-by: Wolfgang Denk <wd@denx.de>
12681 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
12682 Author: Andy Fleming <afleming@freescale.com>
12683 Date: Fri Jun 8 16:41:18 2007 -0500
12685 Remove erroneous errata code from Marvel 88E1111S driver
12687 The Marvel 88E1111S driver for the TSEC was copied from the
12688 88E1101 driver, and included a fix for an erratum which does not
12689 exist on that part. Now it is removed
12691 Signed-off-by: Andy Fleming <afleming@freescale.com>
12693 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
12694 Author: Andy Fleming <afleming@freescale.com>
12695 Date: Tue Jun 5 16:38:44 2007 -0500
12697 From: eran liberty <eran.liberty@gmail.com>
12699 adds the reset register to 85xx immap
12701 Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
12702 Signed-off-by: Andy Fleming <afleming@freescale.com>
12704 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
12705 Author: Andy Fleming <afleming@freescale.com>
12706 Date: Thu May 10 17:50:01 2007 -0500
12708 Polished the 85xx ADS config files
12710 Made the boot commands use device trees by default.
12711 Also moved the ramdisk to 1000000 (I think the previous address
12712 was getting overridden during boot).
12714 Signed-off-by: Andy Fleming <afleming@freescale.com>
12716 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
12717 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12718 Date: Wed May 9 11:03:32 2007 -0500
12720 8544ds: Fix Makefile after moving pixis to board/freescale.
12722 The OBJTREE != SRCTREE build scenario was broken.
12725 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12726 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12728 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
12729 Author: Andy Fleming <afleming@freescale.com>
12730 Date: Wed May 9 00:54:20 2007 -0500
12732 tsec: Fix PHY code to match first driver
12734 Jarrold Wen noticed that the generic PHY code always matches
12735 under the current implementation. Change it so the first match
12736 wins, and *only* unknown PHYs trigger the generic driver
12738 Signed-off-by: Andy Fleming <afleming@freescale.com>
12740 commit ccc091aac61a38cd998d575d92f7232e256d6312
12741 Author: Andy Fleming <afleming@freescale.com>
12742 Date: Tue May 8 17:27:43 2007 -0500
12744 Add support for CPM device tree configuration to 8560 ADS
12746 * Adds code to modify CPM frequencies
12747 * Cleans up the config file to #define TSEC and (for now) #undef FCC
12748 * Adds the MII command for all 8560 ADS configurations
12749 * Updates config file to provide convenience commands for booting
12752 Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
12753 Signed-off-by: Andy Fleming <afleming@freescale.com>
12755 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
12756 Author: Andy Fleming <afleming@freescale.com>
12757 Date: Tue May 8 17:23:02 2007 -0500
12759 Fix Marvell 88e1145 PHY init code
12761 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
12762 where the reset was being done after the errata code instead of
12765 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
12766 Signed-off-by: Andy Fleming <afleming@freescale.com>
12768 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
12769 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12770 Date: Wed Jul 11 14:52:16 2007 -0500
12772 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
12774 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12776 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
12777 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12778 Date: Wed Jul 11 14:52:08 2007 -0500
12780 pciauto setup bridge
12782 The P2P bridge bus numbers programmed into the device are relative to
12785 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12787 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
12788 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12789 Date: Wed Jul 11 14:52:01 2007 -0500
12791 Support PCIe extended config registers
12793 FSL PCIe block has extended cfg registers in the 100 and 400 range.
12794 For example, to read the LTSSM register: pci display <busn>.0 404 1
12796 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12798 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
12799 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12800 Date: Wed Jul 11 14:51:48 2007 -0500
12802 Minor improvements to drivers/pci_auto.c
12804 - Make pciauto_{pre,post}scan_setup_bridge non-static
12805 - Added physical address display in debug messages.
12807 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12809 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
12810 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12811 Date: Wed Jul 11 14:51:35 2007 -0500
12813 Start pci hose scan from hose->current_busno.
12815 Ensure hose->current_busno is not less than first_busno. This fixes
12816 broken board code which leaves current_busno=0 when first_busno is
12817 greater than 0 for the cases with multiple controllers.
12819 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12821 commit 3865b1fb7843a08ad49a6319a36415752276ff48
12822 Author: Stefan Roese <sr@denx.de>
12823 Date: Wed Jul 11 12:13:53 2007 +0200
12825 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
12827 Signed-off-by: Stefan Roese <sr@denx.de>
12829 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
12830 Author: Bartlomiej Sieka <tur@semihalf.com>
12831 Date: Wed Jul 11 20:11:07 2007 +0200
12833 CM1.QP1: Support for the Schindler CM1.QP1 board.
12835 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
12836 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
12838 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
12839 Author: Heiko Schocher <hs@pollux.denx.de>
12840 Date: Wed Jul 11 18:39:11 2007 +0200
12842 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
12843 - now the Flash ST M29W040B is supported (not tested)
12844 - fix the "led" command
12845 - fix compile error, if BUILD_DIR is used
12847 Signed-off-by: Heiko Schocher <hs@denx.de>
12849 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
12850 Author: Stefan Roese <sr@denx.de>
12851 Date: Sun Jul 8 13:44:27 2007 +0200
12853 Fix malloc problem introduced with the relocation fixup for the PPC platform
12855 The relocation fixup didn't handle the malloc pointer initialization
12856 correctly. This patch fixes this problem. Tested successfully on 4xx.
12857 The relocation fixup patches for 4xx will follow soon.
12859 Signed-off-by: Stefan Roese <sr@denx.de>
12861 commit 0dca874db62718e41253659e60f3a1de7eb418ce
12862 Author: TsiChung <tcliew@Goku.(none)>
12863 Date: Tue Jul 10 15:45:43 2007 -0500
12865 Cache update and added CFG_UNIFY_CACHE
12867 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
12869 Signed-off-by: TsiChung <tcliew@Goku.(none)>
12871 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
12872 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12873 Date: Thu Jul 5 23:36:16 2007 -0500
12875 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
12877 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
12879 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12881 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
12882 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12883 Date: Thu Jul 5 23:31:25 2007 -0500
12885 Update header files
12887 Include immap.h and renamed mcfrtc.h to rtc.h
12889 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12891 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
12892 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12893 Date: Thu Jul 5 23:29:21 2007 -0500
12895 Add mcffec_initialize()
12897 Added mcffec_initialize() in eth_initialize()
12899 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12901 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
12902 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12903 Date: Thu Jul 5 23:27:40 2007 -0500
12905 Update header file and clean up
12909 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12911 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
12912 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12913 Date: Thu Jul 5 23:23:15 2007 -0500
12915 New uart structure and defines
12917 Seperated from mcfuart.h
12919 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12921 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
12922 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12923 Date: Thu Jul 5 23:22:31 2007 -0500
12925 New timer structure and defines
12927 Seperated from mcftimer.h
12929 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12931 commit e04acb2eba4782489417240eff76e20e176aec10
12932 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12933 Date: Thu Jul 5 23:21:09 2007 -0500
12935 Rename mcfrtc to rtc
12937 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
12939 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12941 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
12942 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12943 Date: Thu Jul 5 23:17:36 2007 -0500
12945 Rename mcfserial.c. Update include header
12947 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
12949 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12951 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
12952 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12953 Date: Thu Jul 5 23:13:58 2007 -0500
12955 Header file update, clean up and cache handling
12957 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
12959 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12961 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
12962 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12963 Date: Thu Jul 5 23:10:40 2007 -0500
12965 Create interrupts.c and modify Makefile
12967 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
12969 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12971 commit ddd104f1ed655eda50c06ba636237a83ed943f34
12972 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12973 Date: Thu Jul 5 23:06:55 2007 -0500
12977 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12979 commit b9bf3de377b2bae70c983c9b97feae914999e735
12980 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12981 Date: Thu Jul 5 23:05:31 2007 -0500
12983 Update header file and some clean up
12985 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
12987 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12989 commit 84a015b52ec820a5ae173717d78516de731c89c2
12990 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12991 Date: Thu Jul 5 23:03:28 2007 -0500
12993 Update header file and enable icache
12995 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
12997 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
12999 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
13000 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13001 Date: Thu Jul 5 23:01:22 2007 -0500
13003 Update header file and removed interrupt_init()
13005 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
13007 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13009 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
13010 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13011 Date: Thu Jul 5 22:57:46 2007 -0500
13013 Update for flash.o and mii.o
13015 Removed flash.o and added mii.o
13017 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13019 commit c5ded275d839e4ff79f41718d50a835d989f57bc
13020 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13021 Date: Thu Jul 5 22:56:19 2007 -0500
13023 MII functions calls.
13025 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13027 commit 427c814104560e29bda14955c67703245aaaa5b4
13028 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13029 Date: Thu Jul 5 22:54:42 2007 -0500
13031 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
13033 The removed MII routines will be placed in mii.c.
13035 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13037 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
13038 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13039 Date: Thu Jul 5 22:51:05 2007 -0500
13043 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
13045 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13047 commit 2744354a8437b8f78db178e30660215688bff570
13048 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13049 Date: Thu Jul 5 22:46:38 2007 -0500
13051 Seperate old structure defines and new structure defines
13053 Removed new uart structure and defines to uart.h
13055 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13057 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
13058 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13059 Date: Thu Jul 5 22:45:01 2007 -0500
13061 Seperate old structure defines and new structure defines
13063 New timer structure and defines will move to new timer.h
13065 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13067 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
13068 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13069 Date: Thu Jul 5 22:42:23 2007 -0500
13075 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13077 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
13078 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13079 Date: Thu Jul 5 22:41:24 2007 -0500
13083 Replaced whitespace with tabs
13085 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13087 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
13088 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13089 Date: Thu Jul 5 22:39:07 2007 -0500
13091 Create new header file and move peripherals base address from configs file to new header file.
13093 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
13095 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13097 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
13098 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13099 Date: Thu Jul 5 22:24:58 2007 -0500
13103 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
13105 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13107 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
13108 Author: Jon Loeliger <jdl@freescale.com>
13109 Date: Tue Jul 10 11:19:50 2007 -0500
13111 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
13113 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
13114 Those always evaluated TRUE, and thus were always compiled
13115 even when IDE really wasn't defined/wanted.
13117 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13119 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
13120 Author: Jon Loeliger <jdl@freescale.com>
13121 Date: Tue Jul 10 11:13:21 2007 -0500
13123 drivers/: Remove lingering references to CFG_CMD_* symbols.
13125 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
13126 Those always evaluated TRUE, and thus were always compiled
13127 even when IDE really wasn't defined/wanted.
13129 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13131 commit f40a7f3e3888b42a43674b099e5470022c8c544c
13132 Author: Jon Loeliger <jdl@freescale.com>
13133 Date: Tue Jul 10 11:07:56 2007 -0500
13135 fs/: Remove lingering references to CFG_CMD_* symbols.
13137 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
13138 Those always evaluated TRUE, and thus were always compiled
13139 even when IDE really wasn't defined/wanted.
13141 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13143 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
13144 Author: Jon Loeliger <jdl@freescale.com>
13145 Date: Tue Jul 10 11:05:02 2007 -0500
13147 net/: Remove lingering references to CFG_CMD_* symbols.
13149 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
13150 Those always evaluated TRUE, and thus were always compiled
13151 even when IDE really wasn't defined/wanted.
13153 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13155 commit 902531788376046da212afd1661cffb62f3daa1c
13156 Author: Jon Loeliger <jdl@freescale.com>
13157 Date: Tue Jul 10 11:02:44 2007 -0500
13159 common/: Remove lingering references to CFG_CMD_* symbols.
13161 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
13162 Those always evaluated TRUE, and thus were always compiled
13163 even when IDE really wasn't defined/wanted.
13165 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13167 commit d39b57415838c73fb0a37eca84de3c68ba990586
13168 Author: Jon Loeliger <jdl@freescale.com>
13169 Date: Tue Jul 10 10:48:22 2007 -0500
13171 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
13173 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
13174 Those always evaluated TRUE, and thus were always compiled
13175 even when IDE really wasn't defined/wanted.
13177 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13179 commit 77a318545d57aefa844752465b94c7e09a3f26d0
13180 Author: Jon Loeliger <jdl@freescale.com>
13181 Date: Tue Jul 10 10:39:10 2007 -0500
13183 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
13185 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
13186 Those always evaluated TRUE, and thus were always compiled
13187 even when IDE really wasn't defined/wanted.
13189 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13191 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
13192 Author: Jon Loeliger <jdl@freescale.com>
13193 Date: Tue Jul 10 10:27:39 2007 -0500
13195 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
13197 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13199 commit 079a136c3588814784561d6e4856970ee82d6e2a
13200 Author: Jon Loeliger <jdl@freescale.com>
13201 Date: Tue Jul 10 10:12:10 2007 -0500
13203 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
13205 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
13206 used to be included but CONFIG_BOOTP_MASK was not defined.
13208 Remove lingering references to CFG_CMD_* symbols.
13210 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13212 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
13213 Author: Jon Loeliger <jdl@freescale.com>
13214 Date: Tue Jul 10 09:38:02 2007 -0500
13216 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
13218 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
13219 used to be included but CONFIG_BOOTP_MASK was not defined.
13221 Remove lingering references to CFG_CMD_* symbols.
13223 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13225 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
13226 Author: Jon Loeliger <jdl@freescale.com>
13227 Date: Tue Jul 10 09:29:01 2007 -0500
13229 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
13231 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
13232 used to be included but CONFIG_BOOTP_MASK was not defined.
13234 Remove lingering references to CFG_CMD_* symbols.
13236 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13238 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
13239 Author: Jon Loeliger <jdl@freescale.com>
13240 Date: Tue Jul 10 09:22:23 2007 -0500
13242 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
13244 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
13245 used to be included but CONFIG_BOOTP_MASK was not defined.
13247 Remove lingering references to CFG_CMD_* symbols.
13249 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13251 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
13252 Author: Jon Loeliger <jdl@freescale.com>
13253 Date: Tue Jul 10 09:10:49 2007 -0500
13255 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
13257 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
13258 used to be included but CONFIG_BOOTP_MASK was not defined.
13260 Remove lingering references to CFG_CMD_* symbols.
13262 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13264 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
13265 Author: Jon Loeliger <jdl@freescale.com>
13266 Date: Tue Jul 10 09:02:57 2007 -0500
13268 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
13270 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
13271 used to be included but CONFIG_BOOTP_MASK was not defined.
13273 Remove lingering references to CFG_CMD_* symbols.
13275 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13277 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
13278 Author: Jon Loeliger <jdl@freescale.com>
13279 Date: Mon Jul 9 22:08:34 2007 -0500
13281 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
13283 All of the choices for CONFIG_BOOTP_ are now documented in
13284 the README file. You must now individually select exactly
13285 the set that you want using a series of
13286 #define CONFIG_BOOTP_<x>
13287 statements in the board port config files now.
13289 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13291 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
13292 Author: Jon Loeliger <jdl@freescale.com>
13293 Date: Mon Jul 9 21:57:31 2007 -0500
13295 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
13297 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13299 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
13300 Author: Jon Loeliger <jdl@freescale.com>
13301 Date: Mon Jul 9 21:48:26 2007 -0500
13303 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
13305 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13307 commit 37d4bb70586659dedef1658ce1bed071be098aec
13308 Author: Jon Loeliger <jdl@freescale.com>
13309 Date: Mon Jul 9 21:38:02 2007 -0500
13311 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
13313 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13315 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
13316 Author: Jon Loeliger <jdl@freescale.com>
13317 Date: Mon Jul 9 21:31:24 2007 -0500
13319 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
13321 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13323 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
13324 Author: Jon Loeliger <jdl@freescale.com>
13325 Date: Mon Jul 9 21:24:19 2007 -0500
13327 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
13329 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13331 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
13332 Author: Jon Loeliger <jdl@freescale.com>
13333 Date: Mon Jul 9 21:16:53 2007 -0500
13335 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
13337 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13339 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
13340 Author: Jon Loeliger <jdl@freescale.com>
13341 Date: Mon Jul 9 19:12:30 2007 -0500
13343 Retire CONFIG_COMMANDS finally.
13344 Strip old CFG_CMD_* symbols out.
13346 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13348 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
13349 Author: Jon Loeliger <jdl@freescale.com>
13350 Date: Mon Jul 9 19:10:03 2007 -0500
13352 Update README.* to reference new CONFIG_CMD_* names now.
13354 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13356 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
13357 Author: Jon Loeliger <jdl@freescale.com>
13358 Date: Mon Jul 9 19:06:00 2007 -0500
13360 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
13362 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13364 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
13365 Author: Jon Loeliger <jdl@freescale.com>
13366 Date: Mon Jul 9 18:57:22 2007 -0500
13368 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
13370 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13372 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
13373 Author: Jon Loeliger <jdl@freescale.com>
13374 Date: Mon Jul 9 18:45:16 2007 -0500
13376 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
13378 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13380 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
13381 Author: Jon Loeliger <jdl@freescale.com>
13382 Date: Mon Jul 9 18:38:39 2007 -0500
13384 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
13386 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13388 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
13389 Author: Jon Loeliger <jdl@freescale.com>
13390 Date: Mon Jul 9 18:31:28 2007 -0500
13392 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
13394 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13396 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
13397 Author: Jon Loeliger <jdl@freescale.com>
13398 Date: Mon Jul 9 18:24:55 2007 -0500
13400 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
13402 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13404 commit fcec2eb93e126400009729328e797f12bc94f1fd
13405 Author: Jon Loeliger <jdl@freescale.com>
13406 Date: Mon Jul 9 18:19:09 2007 -0500
13408 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
13410 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13412 commit a593814f2be0c9cdc3133cd550b167b8a988328f
13413 Author: Jon Loeliger <jdl@freescale.com>
13414 Date: Mon Jul 9 18:10:50 2007 -0500
13416 rtc/: Remove obsolete references to CONFIG_COMMANDS
13418 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13420 commit 67350568f9d46e66c21829f3513b3db0caeb948b
13421 Author: Jon Loeliger <jdl@freescale.com>
13422 Date: Mon Jul 9 18:05:38 2007 -0500
13424 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
13426 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13428 commit 7def6b34f910f08d7ef0a14646da067719237ca2
13429 Author: Jon Loeliger <jdl@freescale.com>
13430 Date: Mon Jul 9 18:02:11 2007 -0500
13432 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
13434 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13436 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
13437 Author: Jon Loeliger <jdl@freescale.com>
13438 Date: Mon Jul 9 17:56:50 2007 -0500
13440 fs/: Remove obsolete references to CONFIG_COMMANDS
13442 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13444 commit c91898bbc505aff3e12a807af88e76da18efb7ee
13445 Author: Jon Loeliger <jdl@freescale.com>
13446 Date: Mon Jul 9 17:46:09 2007 -0500
13448 tools/: Remove obsolete references to CONFIG_COMMANDS
13450 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13452 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
13453 Author: Jon Loeliger <jdl@freescale.com>
13454 Date: Mon Jul 9 17:45:14 2007 -0500
13456 net/: Remove obsolete references to CONFIG_COMMANDS
13458 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13460 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
13461 Author: Jon Loeliger <jdl@freescale.com>
13462 Date: Mon Jul 9 17:39:42 2007 -0500
13464 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
13466 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13468 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
13469 Author: Jon Loeliger <jdl@freescale.com>
13470 Date: Mon Jul 9 17:30:01 2007 -0500
13472 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
13474 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13476 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
13477 Author: Jon Loeliger <jdl@freescale.com>
13478 Date: Mon Jul 9 17:22:37 2007 -0500
13480 disk/: Remove obsolete references to CONFIG_COMMANDS
13482 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13484 commit 639221c76c88215bd55af83ad174fc30d1940f8f
13485 Author: Jon Loeliger <jdl@freescale.com>
13486 Date: Mon Jul 9 17:15:49 2007 -0500
13488 include/: Remove obsolete references to CONFIG_COMMANDS
13489 Mostly removed from comments here.
13491 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13493 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
13494 Author: Wolfgang Denk <wd@denx.de>
13495 Date: Tue Jul 10 00:01:28 2007 +0200
13497 Coding style cleanup; update CHANGELOG.
13499 Signed-off-by: Wolfgang Denk <wd@denx.de>
13501 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
13502 Author: Stefan Roese <sr@denx.de>
13503 Date: Mon Jul 9 11:00:24 2007 +0200
13505 Small coding style cleanup
13507 Signed-off-by: Stefan Roese <sr@denx.de>
13509 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
13510 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13511 Date: Mon Jul 9 10:10:08 2007 +0200
13513 Migrate esd 405EP boards to new NAND subsystem
13515 Remove unused CFG_NAND_LEGACY define
13517 These boards to not have NAND.
13519 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13521 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
13522 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13523 Date: Mon Jul 9 10:10:06 2007 +0200
13525 Migrate esd 405EP boards to new NAND subsystem
13527 Migrate esd 405EP boards to new NAND subsystem
13530 -use correct io accessors (in/out_be32())
13532 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13534 commit e09f7ab5749c345f924da272bea0521a73af5b11
13535 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13536 Date: Mon Jul 9 10:10:04 2007 +0200
13538 Migrate esd 405EP boards to new NAND subsystem
13540 This patch prepares the migration from the legacy NAND driver
13541 to U-Boot's new NAND subsystem for esd boards.
13543 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13545 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
13546 Author: Jon Loeliger <jdl@freescale.com>
13547 Date: Sun Jul 8 18:10:08 2007 -0500
13549 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
13551 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13553 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
13554 Author: Jon Loeliger <jdl@freescale.com>
13555 Date: Sun Jul 8 18:05:39 2007 -0500
13557 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
13559 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13561 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
13562 Author: Jon Loeliger <jdl@freescale.com>
13563 Date: Sun Jul 8 18:02:23 2007 -0500
13565 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
13567 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13569 commit baa26db4113679b80970ff447d91cc10217742a6
13570 Author: Jon Loeliger <jdl@freescale.com>
13571 Date: Sun Jul 8 17:51:39 2007 -0500
13573 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
13575 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13577 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
13578 Author: Jon Loeliger <jdl@freescale.com>
13579 Date: Sun Jul 8 17:02:01 2007 -0500
13581 Clear up confusion over the CMD_POST and POST_DIAG mess.
13583 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
13584 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
13585 Clear this mess up some.
13587 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13589 commit b3631487105a57ab7cbadfc26efbaf9676275018
13590 Author: Jon Loeliger <jdl@freescale.com>
13591 Date: Sun Jul 8 15:45:08 2007 -0500
13593 Remove references to the old cmd_confdefs.h include file.
13595 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13597 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
13598 Author: Jon Loeliger <jdl@freescale.com>
13599 Date: Sun Jul 8 15:42:59 2007 -0500
13601 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
13603 Use new CONFIG_CMD_* in lwmon5.h board config file.
13604 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
13606 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13608 commit a5562901661bd428f7e5feb333f796372cb81019
13609 Author: Jon Loeliger <jdl@freescale.com>
13610 Date: Sun Jul 8 15:31:57 2007 -0500
13612 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
13614 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13616 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
13617 Author: Jon Loeliger <jdl@freescale.com>
13618 Date: Sun Jul 8 15:02:44 2007 -0500
13620 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
13622 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13624 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
13625 Author: Jon Loeliger <jdl@freescale.com>
13626 Date: Sun Jul 8 15:12:40 2007 -0500
13628 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
13630 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13632 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
13633 Author: Jon Loeliger <jdl@freescale.com>
13634 Date: Sun Jul 8 14:55:07 2007 -0500
13636 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
13638 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13640 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
13641 Author: Jon Loeliger <jdl@freescale.com>
13642 Date: Sun Jul 8 14:49:44 2007 -0500
13644 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
13646 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13648 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
13649 Author: Jon Loeliger <jdl@freescale.com>
13650 Date: Sun Jul 8 14:21:43 2007 -0500
13652 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
13654 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13656 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
13657 Author: Jon Loeliger <jdl@freescale.com>
13658 Date: Sun Jul 8 14:14:17 2007 -0500
13660 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
13662 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13664 commit 348f258f24253433e4a2302a0bbceb6740a67246
13665 Author: Jon Loeliger <jdl@freescale.com>
13666 Date: Sun Jul 8 13:46:18 2007 -0500
13668 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
13670 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13672 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
13673 Author: Jon Loeliger <jdl@freescale.com>
13674 Date: Sun Jul 8 10:09:35 2007 -0500
13676 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
13678 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13680 commit 60a0876b5106b34220e459c208bbf648073306c0
13681 Author: Jon Loeliger <jdl@freescale.com>
13682 Date: Sat Jul 7 21:04:26 2007 -0500
13684 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
13686 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13688 commit dcaa71562826a2466e894c868d132509dcda8444
13689 Author: Jon Loeliger <jdl@freescale.com>
13690 Date: Sat Jul 7 20:56:05 2007 -0500
13692 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
13694 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13696 commit 3c3227f3c737502311b25b72084573901cbbf17d
13697 Author: Jon Loeliger <jdl@freescale.com>
13698 Date: Sat Jul 7 20:40:43 2007 -0500
13700 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
13702 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13704 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
13705 Author: Jon Loeliger <jdl@freescale.com>
13706 Date: Thu Jul 5 19:52:35 2007 -0500
13708 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
13710 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13712 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
13713 Author: Jon Loeliger <jdl@freescale.com>
13714 Date: Thu Jul 5 19:32:07 2007 -0500
13716 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
13718 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13720 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
13721 Author: Jon Loeliger <jdl@freescale.com>
13722 Date: Thu Jul 5 19:13:52 2007 -0500
13724 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
13726 Since ADS860.h includes "board/fads/fads.h" with ramifications
13727 on the CONFIG_COMMAND treatment, it too has to be adjusted to
13728 exclude already configured commands in this same commit.
13730 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13732 commit 10e038932f22ee80ebd53de312531e70e6590a2f
13733 Author: Thomas Knobloch <knobloch@siemens.com>
13734 Date: Fri Jul 6 14:58:39 2007 +0200
13736 [NAND] Bad block skipping for command nboot
13738 The old implementation of command nboot does not support reading the image from
13739 NAND flash with skipping of bad blocks. The patch implements a new version of
13740 the nboot command: by calling nboot.jffs2 from the u-boot command line the
13741 command will load the image from NAND flash with respect to bad blocks (by using
13742 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
13745 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
13746 Signed-off-by: Stefan Roese <sr@denx.de>
13748 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
13749 Author: Stefan Roese <sr@denx.de>
13750 Date: Fri Jul 6 12:26:51 2007 +0200
13752 ppc4xx: Update lwmon5 default environment
13754 Signed-off-by: Stefan Roese <sr@denx.de>
13756 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
13757 Author: Stefan Roese <sr@denx.de>
13758 Date: Fri Jul 6 11:48:24 2007 +0200
13760 ppc4xx: Update lwmon5 board
13762 Add unlock=yes environment variable to default variables to unlock
13763 the CFI flash by default.
13765 Signed-off-by: Stefan Roese <sr@denx.de>
13767 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
13768 Author: Stefan Roese <sr@denx.de>
13769 Date: Fri Jul 6 09:45:47 2007 +0200
13771 Fix problem with get/setdcr commands introduced by cfg patches
13773 Signed-off-by: Stefan Roese <sr@denx.de>
13775 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
13776 Author: Wolfgang Denk <wd@denx.de>
13777 Date: Fri Jul 6 02:50:19 2007 +0200
13779 Code cleanup and default config update for STC GP3 SSA board.
13781 Signed-off-by: Wolfgang Denk <wd@denx.de>
13783 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
13784 Author: Wolfgang Denk <wd@denx.de>
13785 Date: Thu Jul 5 17:56:27 2007 +0200
13787 Fixing some typos etc. introduced mainly by cfg patches.
13789 Signed-off-by: Wolfgang Denk <wd@denx.de>
13791 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
13792 Author: Wolfgang Denk <wd@denx.de>
13793 Date: Thu Jul 5 11:12:16 2007 +0200
13795 Minor coding style cleanup. Update CHANGELOG.
13797 commit dca3b3d6d6396b67e5e84af53452164923c73443
13798 Author: Jon Loeliger <jdl@jdl.com>
13799 Date: Wed Jul 4 22:33:46 2007 -0500
13801 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
13803 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13805 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
13806 Author: Jon Loeliger <jdl@jdl.com>
13807 Date: Wed Jul 4 22:33:38 2007 -0500
13809 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
13811 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13813 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
13814 Author: Jon Loeliger <jdl@jdl.com>
13815 Date: Wed Jul 4 22:33:30 2007 -0500
13817 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
13819 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13821 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
13822 Author: Jon Loeliger <jdl@jdl.com>
13823 Date: Wed Jul 4 22:33:23 2007 -0500
13825 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
13827 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13829 commit 26a34560d56a9df5bc2ae23525d9229736134757
13830 Author: Jon Loeliger <jdl@jdl.com>
13831 Date: Wed Jul 4 22:33:17 2007 -0500
13833 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
13835 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13837 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
13838 Author: Jon Loeliger <jdl@jdl.com>
13839 Date: Wed Jul 4 22:33:13 2007 -0500
13841 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
13843 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13845 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
13846 Author: Jon Loeliger <jdl@jdl.com>
13847 Date: Wed Jul 4 22:33:07 2007 -0500
13849 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
13851 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13853 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
13854 Author: Jon Loeliger <jdl@jdl.com>
13855 Date: Wed Jul 4 22:33:01 2007 -0500
13857 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
13859 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13861 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
13862 Author: Jon Loeliger <jdl@jdl.com>
13863 Date: Wed Jul 4 22:32:57 2007 -0500
13865 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
13867 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13869 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
13870 Author: Jon Loeliger <jdl@jdl.com>
13871 Date: Wed Jul 4 22:32:51 2007 -0500
13873 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
13875 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13877 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
13878 Author: Jon Loeliger <jdl@jdl.com>
13879 Date: Wed Jul 4 22:32:32 2007 -0500
13881 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
13883 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13885 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
13886 Author: Jon Loeliger <jdl@jdl.com>
13887 Date: Wed Jul 4 22:32:25 2007 -0500
13889 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
13891 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13893 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
13894 Author: Jon Loeliger <jdl@jdl.com>
13895 Date: Wed Jul 4 22:32:19 2007 -0500
13897 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
13899 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13901 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
13902 Author: Jon Loeliger <jdl@jdl.com>
13903 Date: Wed Jul 4 22:32:10 2007 -0500
13905 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
13907 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13909 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
13910 Author: Jon Loeliger <jdl@jdl.com>
13911 Date: Wed Jul 4 22:32:03 2007 -0500
13913 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
13915 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13917 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
13918 Author: Jon Loeliger <jdl@jdl.com>
13919 Date: Wed Jul 4 22:31:56 2007 -0500
13921 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
13923 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13925 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
13926 Author: Jon Loeliger <jdl@jdl.com>
13927 Date: Wed Jul 4 22:31:49 2007 -0500
13929 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
13931 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13933 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
13934 Author: Jon Loeliger <jdl@jdl.com>
13935 Date: Wed Jul 4 22:31:42 2007 -0500
13937 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
13939 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13941 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
13942 Author: Jon Loeliger <jdl@jdl.com>
13943 Date: Wed Jul 4 22:31:35 2007 -0500
13945 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
13947 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13949 commit d794cfefead5fc177cf4f41164e80382e9c9484a
13950 Author: Jon Loeliger <jdl@jdl.com>
13951 Date: Wed Jul 4 22:31:15 2007 -0500
13953 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
13955 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13957 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
13958 Author: Jon Loeliger <jdl@jdl.com>
13959 Date: Wed Jul 4 22:31:07 2007 -0500
13961 include/configs: Use new CONFIG_CMD_* in STx board config files.
13963 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13965 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
13966 Author: Jon Loeliger <jdl@jdl.com>
13967 Date: Wed Jul 4 22:30:58 2007 -0500
13969 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
13971 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13973 commit 2694690e285acaa34922f55f4b5ae030da60c55a
13974 Author: Jon Loeliger <jdl@jdl.com>
13975 Date: Wed Jul 4 22:30:50 2007 -0500
13977 include/configs: Use new CONFIG_CMD_* in TQM board config files.
13979 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13981 commit 1cc4c458329765b58e584a19821e796b3c10e976
13982 Author: Jon Loeliger <jdl@jdl.com>
13983 Date: Wed Jul 4 22:30:28 2007 -0500
13985 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
13987 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13989 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
13990 Author: Jon Loeliger <jdl@jdl.com>
13991 Date: Wed Jul 4 22:30:06 2007 -0500
13993 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
13995 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13997 commit b44896215a09c60fa40cae906f7ed207bbc2c492
13998 Author: Sergei Poselenov <sposelenov@emcraft.com>
13999 Date: Thu Jul 5 08:17:37 2007 +0200
14001 Merged POST framework with the current TOT.
14003 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
14005 commit b24629fa377214d63bb40d1360e354b6d3e4af56
14006 Author: Jon Loeliger <jdl@jdl.com>
14007 Date: Wed Jun 13 13:23:15 2007 -0500
14009 mpc86xx: Remove old CFG_CMD_* references.
14011 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14013 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
14014 Author: Jon Loeliger <jdl@jdl.com>
14015 Date: Wed Jun 13 13:22:54 2007 -0500
14017 Add MPC8568MDS to MAKEALL 85xx target.
14019 It was missing from the original port submission.
14021 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14023 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
14024 Author: Jon Loeliger <jdl@jdl.com>
14025 Date: Wed Jun 13 13:22:08 2007 -0500
14027 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
14029 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14031 commit 56b304ac2091689506088a9ae67f63fd6300cf16
14032 Author: Jon Loeliger <jdl@jdl.com>
14033 Date: Wed Jun 13 13:21:37 2007 -0500
14035 Fix #if typo in CONFIG_CMD_* changes.
14037 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14039 commit f780b83316d9af1f61d71cc88b1917b387b9b995
14040 Author: Niklaus Giger <niklausgiger@gmx.ch>
14041 Date: Wed Jun 27 18:11:38 2007 +0200
14043 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
14045 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
14047 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
14048 Author: Stefan Roese <sr@denx.de>
14049 Date: Wed Jul 4 10:06:30 2007 +0200
14051 ppc4xx: Update lwmon5 board
14053 - Add optional ECC generation routine to preserve existing
14054 RAM values. This is needed for the Linux log-buffer support
14055 - Add optional DDR2 setup with CL=4
14056 - GPIO50 not used anymore
14057 - Lime register setup added
14059 Signed-off-by: Stefan Roese <sr@denx.de>
14061 commit 6810a34677dbc446334f5e451f1682426dd33b49
14062 Author: Grant Likely <grant.likely@secretlab.ca>
14063 Date: Tue Jul 3 00:17:28 2007 -0600
14065 Fix Makefile to use $(MKCONFIG) macro for all board ports
14067 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14069 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
14070 Author: Grant Likely <grant.likely@secretlab.ca>
14071 Date: Tue Jul 3 00:17:28 2007 -0600
14073 Fix Makefile to use $(MKCONFIG) macro for all board ports
14075 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14077 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
14078 Author: Grant Likely <grant.likely@secretlab.ca>
14079 Date: Tue Jul 3 00:34:49 2007 -0600
14081 Correct fixup relocation for mpc83xx
14083 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14085 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
14086 Author: Grant Likely <grant.likely@secretlab.ca>
14087 Date: Tue Jul 3 00:34:44 2007 -0600
14089 Correct fixup relocation for mpc8260
14091 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14093 commit f3a52fe05923935db86985daf9438e2f70ac39aa
14094 Author: Grant Likely <grant.likely@secretlab.ca>
14095 Date: Tue Jul 3 00:34:39 2007 -0600
14097 Correct fixup relocation for mpc824x
14099 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14101 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
14102 Author: Grant Likely <grant.likely@secretlab.ca>
14103 Date: Tue Jul 3 00:34:34 2007 -0600
14105 Correct fixup relocation for mpc8220
14107 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14109 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
14110 Author: Grant Likely <grant.likely@secretlab.ca>
14111 Date: Tue Jul 3 00:34:29 2007 -0600
14113 Correct fixup relocation for MPC5xxx
14115 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14117 commit 3649cd99ba815b6601868735765602f00ef3692b
14118 Author: Grant Likely <grant.likely@secretlab.ca>
14119 Date: Tue Jul 3 00:34:24 2007 -0600
14121 Correct relocation fixup for mpc5xx
14123 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14125 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
14126 Author: Grant Likely <grant.likely@secretlab.ca>
14127 Date: Tue Jul 3 00:34:19 2007 -0600
14129 Don't set gd->reloc_off if relocation of .fixup works correctly
14131 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14133 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
14134 Author: Grant Likely <grant.likely@secretlab.ca>
14135 Date: Tue Jul 3 00:34:14 2007 -0600
14137 Remove obsolete mpc83xx linker scripts
14139 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14141 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
14142 Author: Grant Likely <grant.likely@secretlab.ca>
14143 Date: Tue Jul 3 00:34:09 2007 -0600
14145 Consolidate mpc8260 linker scripts
14147 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14149 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
14150 Author: Grant Likely <grant.likely@secretlab.ca>
14151 Date: Tue Jul 3 00:34:04 2007 -0600
14153 Remove obsolete mpc824x linker scripts
14155 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14157 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
14158 Author: Grant Likely <grant.likely@secretlab.ca>
14159 Date: Tue Jul 3 00:33:59 2007 -0600
14161 Remove obsolete mpc824x linker scripts (3 of 4)
14163 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14165 commit a71c084f3ac7fedf144537db2b2da47323068833
14166 Author: Grant Likely <grant.likely@secretlab.ca>
14167 Date: Tue Jul 3 00:33:53 2007 -0600
14169 Remove obsolete mpc824x linker scripts (2 of 4)
14171 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14173 commit f670a15468d1365241d40022b9408e1004181f5e
14174 Author: Grant Likely <grant.likely@secretlab.ca>
14175 Date: Tue Jul 3 00:33:48 2007 -0600
14177 Remove obsolete mpc824x linker scripts (1 of 4)
14179 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14181 commit 09555bd45a04c0e54f172528d21bc18896550d28
14182 Author: Grant Likely <grant.likely@secretlab.ca>
14183 Date: Tue Jul 3 00:33:43 2007 -0600
14185 Remove obsolete mpc8220 linker scripts
14187 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14189 commit 5efb992f046e51225c93d52f80fecbe433abd789
14190 Author: Grant Likely <grant.likely@secretlab.ca>
14191 Date: Tue Jul 3 00:33:38 2007 -0600
14193 Remove obsolete mpc5xxx linker scripts (3 of 3)
14195 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14197 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
14198 Author: Grant Likely <grant.likely@secretlab.ca>
14199 Date: Tue Jul 3 00:33:33 2007 -0600
14201 Remove obsolete mpc5xxx linker scripts (2 of 3)
14203 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14205 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
14206 Author: Grant Likely <grant.likely@secretlab.ca>
14207 Date: Tue Jul 3 00:33:28 2007 -0600
14209 Remove obsolete mpc5xxx linker scripts (1 of 3)
14211 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14213 commit b7d8e05f8675249b5f208aa73babeed384a4519d
14214 Author: Grant Likely <grant.likely@secretlab.ca>
14215 Date: Tue Jul 3 00:33:23 2007 -0600
14217 Remove obsolete mpc5xx linker scripts
14219 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14221 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
14222 Author: Grant Likely <grant.likely@secretlab.ca>
14223 Date: Tue Jul 3 00:33:18 2007 -0600
14225 Consolidate mpc83xx linker scripts
14227 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14229 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
14230 Author: Grant Likely <grant.likely@secretlab.ca>
14231 Date: Tue Jul 3 00:33:13 2007 -0600
14233 Consolidate mpc8260 linker scripts
14235 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14237 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
14238 Author: Grant Likely <grant.likely@secretlab.ca>
14239 Date: Tue Jul 3 00:33:08 2007 -0600
14241 Consolidate mpc824x linker scripts
14243 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14245 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
14246 Author: Grant Likely <grant.likely@secretlab.ca>
14247 Date: Tue Jul 3 00:33:03 2007 -0600
14249 Consolidate mpc8220 linker scripts
14251 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14253 commit d181c9a15cd41863fe24840d17848429f27d3c8c
14254 Author: Grant Likely <grant.likely@secretlab.ca>
14255 Date: Tue Jul 3 00:32:58 2007 -0600
14257 Consolidate mpc5xxx linker scripts
14259 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14261 commit 287ac924adb7291bebe5086652a362a30ab28b13
14262 Author: Grant Likely <grant.likely@secretlab.ca>
14263 Date: Tue Jul 3 00:32:53 2007 -0600
14265 Consolidate mpc5xx linker scripts
14267 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14269 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
14270 Author: Wolfgang Denk <wd@denx.de>
14271 Date: Wed Jul 4 00:43:53 2007 +0200
14273 Fix a few file permission problems.
14275 Signed-off-by: Wolfgang Denk <wd@denx.de>
14277 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
14278 Author: Wolfgang Denk <wd@denx.de>
14279 Date: Wed Jul 4 00:38:38 2007 +0200
14281 Minor coding style cleanup. Rebuild CHANGELOG file.
14283 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
14284 Author: Jon Loeliger <jdl@jdl.com>
14285 Date: Mon Jun 11 19:03:44 2007 -0500
14287 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
14289 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14291 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
14292 Author: Jon Loeliger <jdl@jdl.com>
14293 Date: Mon Jun 11 19:03:39 2007 -0500
14295 README: Rewrite command line config to use CONFIG_CMD_* names.
14297 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14299 commit 72a074cec68e5bad60d63206c050974e08afd804
14300 Author: Jon Loeliger <jdl@jdl.com>
14301 Date: Mon Jun 11 19:03:34 2007 -0500
14303 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
14305 This is a compatibility step that allows both the older form
14306 and the new form to co-exist for a while until the older can
14307 be removed entirely.
14309 All transformations are of the form:
14311 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
14313 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
14315 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14317 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
14318 Author: Jon Loeliger <jdl@jdl.com>
14319 Date: Mon Jun 11 19:03:28 2007 -0500
14321 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
14323 This is a compatibility step that allows both the older form
14324 and the new form to co-exist for a while until the older can
14325 be removed entirely.
14327 All transformations are of the form:
14329 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
14331 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
14333 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14335 commit 9107ebe0d352420895ab69b715697bdebc8caf50
14336 Author: Jon Loeliger <jdl@jdl.com>
14337 Date: Mon Jun 11 19:03:23 2007 -0500
14339 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
14341 This is a compatibility step that allows both the older form
14342 and the new form to co-exist for a while until the older can
14343 be removed entirely.
14345 All transformations are of the form:
14347 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
14349 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
14351 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14353 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
14354 Author: Jon Loeliger <jdl@jdl.com>
14355 Date: Mon Jun 11 19:03:19 2007 -0500
14357 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
14359 This is a compatibility step that allows both the older form
14360 and the new form to co-exist for a while until the older can
14361 be removed entirely.
14363 All transformations are of the form:
14365 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
14367 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
14369 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14371 commit 737184114ec9c9e0ab94d6713536126073bd2472
14372 Author: Jon Loeliger <jdl@jdl.com>
14373 Date: Mon Jun 11 19:03:15 2007 -0500
14375 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
14377 This is a compatibility step that allows both the older form
14378 and the new form to co-exist for a while until the older can
14379 be removed entirely.
14381 All transformations are of the form:
14383 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
14385 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
14387 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14389 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
14390 Author: Jon Loeliger <jdl@jdl.com>
14391 Date: Mon Jun 11 19:03:08 2007 -0500
14393 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
14395 This is a compatibility step that allows both the older form
14396 and the new form to co-exist for a while until the older can
14397 be removed entirely.
14399 All transformations are of the form:
14401 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
14403 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
14405 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14407 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
14408 Author: Jon Loeliger <jdl@jdl.com>
14409 Date: Mon Jun 11 19:03:03 2007 -0500
14411 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
14413 This is a compatibility step that allows both the older form
14414 and the new form to co-exist for a while until the older can
14415 be removed entirely.
14417 All transformations are of the form:
14419 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
14421 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
14423 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14425 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
14426 Author: Jon Loeliger <jdl@jdl.com>
14427 Date: Mon Jun 11 19:02:58 2007 -0500
14429 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
14431 This is a compatibility step that allows both the older form
14432 and the new form to co-exist for a while until the older can
14433 be removed entirely.
14435 All transformations are of the form:
14437 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
14439 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
14441 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14443 commit 98b79003c21c2578206003256de4e781d6b36ca8
14444 Author: Jon Loeliger <jdl@jdl.com>
14445 Date: Mon Jun 11 19:02:53 2007 -0500
14447 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
14449 This is a compatibility step that allows both the older form
14450 and the new form to co-exist for a while until the older can
14451 be removed entirely.
14453 All transformations are of the form:
14455 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
14457 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
14459 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14461 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
14462 Author: Jon Loeliger <jdl@jdl.com>
14463 Date: Mon Jun 11 19:02:49 2007 -0500
14465 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
14467 This is a compatibility step that allows both the older form
14468 and the new form to co-exist for a while until the older can
14469 be removed entirely.
14471 All transformations are of the form:
14473 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
14475 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
14477 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14479 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
14480 Author: Jon Loeliger <jdl@jdl.com>
14481 Date: Mon Jun 11 19:02:34 2007 -0500
14483 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
14485 This is a compatibility step that allows both the older form
14486 and the new form to co-exist for a while until the older can
14487 be removed entirely.
14489 All transformations are of the form:
14491 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
14493 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
14495 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14497 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
14498 Author: Jon Loeliger <jdl@jdl.com>
14499 Date: Mon Jun 11 19:02:20 2007 -0500
14501 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
14503 This is a compatibility step that allows both the older form
14504 and the new form to co-exist for a while until the older can
14505 be removed entirely.
14507 All transformations are of the form:
14509 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
14511 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
14513 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14515 commit d5be43de93ff905c465e509d45a3164ef48d26e7
14516 Author: Jon Loeliger <jdl@jdl.com>
14517 Date: Mon Jun 11 19:02:10 2007 -0500
14519 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
14521 This is a compatibility step that allows both the older form
14522 and the new form to co-exist for a while until the older can
14523 be removed entirely.
14525 All transformations are of the form:
14527 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
14529 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
14531 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14533 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
14534 Author: Jon Loeliger <jdl@jdl.com>
14535 Date: Mon Jun 11 19:02:05 2007 -0500
14537 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
14539 This is a compatibility step that allows both the older form
14540 and the new form to co-exist for a while until the older can
14541 be removed entirely.
14543 All transformations are of the form:
14545 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
14547 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
14549 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14551 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
14552 Author: Jon Loeliger <jdl@jdl.com>
14553 Date: Mon Jun 11 19:01:54 2007 -0500
14555 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
14557 This is a compatibility step that allows both the older form
14558 and the new form to co-exist for a while until the older can
14559 be removed entirely.
14561 All transformations are of the form:
14563 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
14565 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
14567 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14569 commit a76adc8142c1d956385a109e0b70f9319ede4d66
14570 Author: Jon Loeliger <jdl@jdl.com>
14571 Date: Mon Jun 11 19:01:43 2007 -0500
14573 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
14575 This is a compatibility step that allows both the older form
14576 and the new form to co-exist for a while until the older can
14577 be removed entirely.
14579 All transformations are of the form:
14581 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
14583 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
14585 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14587 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
14588 Author: Jon Loeliger <jdl@jdl.com>
14589 Date: Mon Jun 11 19:01:34 2007 -0500
14591 Introduce initial versions of new Command Config files.
14593 Derive three new files from cmd_confdefs.h:
14594 config_bootp.h - Has BOOTP related config options, not commands
14595 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
14596 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
14598 For now, include "config_bootp.h" for compatability until all
14599 users of it directly include it properly.
14601 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14603 commit 1f2a05898658900dc5717761e27abf2052e67e13
14604 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
14605 Date: Sat Jun 30 18:50:48 2007 +0200
14609 Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
14611 commit a5d71e290f3673269be8eefb4ec44f53412f9461
14612 Author: Heiko Schocher <hs@pollux.denx.de>
14613 Date: Mon Jun 25 19:11:37 2007 +0200
14615 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
14617 Signed-off-by: Heiko Schocher <hs@denx.de>
14619 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
14620 Author: Niklaus Giger <niklaus.giger@nestal.com>
14621 Date: Mon Jun 25 17:03:13 2007 +0200
14623 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
14625 This patch prints the DDR status registers upon machine check
14626 interrupt on the 440EPx/GRx. This can be useful especially when
14627 ECC support is enabled.
14629 I added some small changes to the original patch from Niklaus to
14630 make it compile clean.
14632 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
14633 Signed-off-by: Stefan Roese <sr@denx.de>
14635 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
14636 Author: Niklaus Giger <niklaus.giger@nestal.com>
14637 Date: Mon Jun 25 16:50:55 2007 +0200
14639 ppc4xx: Fix O=buildir builds
14641 This patch fixes the problem to assemble cpu/ppc4xx/start.S
14642 experienced last week where building failed having specified
14643 O=../build.sequoia.
14645 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
14647 commit 466fff1a7bb5fe764a06450626f6098219f446b8
14648 Author: Stefan Roese <sr@denx.de>
14649 Date: Mon Jun 25 15:57:39 2007 +0200
14651 ppc4xx: Add pci_pre_init() for 405 boards
14653 This patch removes the CFG_PCI_PRE_INIT option completely, since
14654 it's not needed anymore with the patch from Matthias Fuchs with
14655 the "weak" pci_pre_init() implementation.
14657 Signed-off-by: Stefan Roese <sr@denx.de>
14659 commit 6f35c53166213c24a5a0e2390ed861136ff73870
14660 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14661 Date: Sun Jun 24 17:41:21 2007 +0200
14663 ppc4xx: Maintenance patch for esd's CPCI405 derivats
14665 -add pci_pre_init() for pci interrupt fixup code
14666 -disable phy sleep mode via reset_phy() function
14667 -use correct io accessors
14670 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14672 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
14673 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14674 Date: Sun Jun 24 17:23:41 2007 +0200
14676 ppc4xx: Add pci_pre_init() for 405 boards
14678 This patch adds support for calling a plattform dependant
14679 pci_pre_init() function for 405 boards. This can be used to
14680 move the current pci_405gp_fixup_irq() function into the
14683 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
14684 A default function with 'weak' attribute is used when
14685 a board specific pci_pre_init() is not implemented.
14687 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14689 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
14690 Author: Wolfgang Denk <wd@denx.de>
14691 Date: Fri Jun 22 23:59:00 2007 +0200
14693 Coding stylke cleanup; rebuild CHANGELOG
14695 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
14696 Author: Igor Lisitsin <igor@emcraft.com>
14697 Date: Wed Apr 18 14:55:19 2007 +0400
14699 Adapt log buffer code to support Linux 2.6
14701 A new environment variable, "logversion", selects the log buffer
14702 behaviour. If it is not set or set to a value other than 2, then the
14703 old, Linux 2.4.4, behaviour is selected.
14705 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
14708 commit a11e06965ec91270c51853407ff1261d3c740386
14709 Author: Igor Lisitsin <igor@emcraft.com>
14710 Date: Wed Mar 28 19:06:19 2007 +0400
14712 Extend POST support for PPC440
14714 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
14716 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
14719 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
14720 Author: Heiko Schocher <hs@pollux.denx.de>
14721 Date: Fri Jun 22 19:11:54 2007 +0200
14723 [PCS440EP] upgrade the PCS440EP board:
14724 - Show on the Status LEDs, some States of the board.
14725 - Get the MAC addresses from the EEProm
14727 - use the CF on the board.
14728 - check the U-Boot image in the Flash with a SHA1
14730 - use dynamic TLB entries generation for the SDRAM
14732 Signed-off-by: Heiko Schocher <hs@denx.de>
14734 commit 3a1f5c81b0b9557817a789bece839905581c2205
14735 Author: Stefan Roese <sr@denx.de>
14736 Date: Fri Jun 22 16:58:40 2007 +0200
14738 ppc4xx: Fix problem with extended program_tlb() funtion
14740 The recently extended program_tlb() function had a problem when
14741 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
14742 virtual address was not incremented. This patch fixes this issue
14743 and is tested on Katmai with 512MB SDRAM.
14745 Signed-off-by: Stefan Roese <sr@denx.de>
14747 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
14748 Author: Rafal Jaworowski <raj@semihalf.com>
14749 Date: Fri Jun 22 14:58:04 2007 +0200
14751 [ppc] Fix build breakage for all non-4xx PowerPC variants.
14753 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
14754 - minor 4xx cleanup
14756 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
14757 Author: Mike Frysinger <vapier@gentoo.org>
14758 Date: Fri Jun 22 10:34:12 2007 +0200
14760 [patch] add nand_init() prototype to nand.h
14762 since nand_init() is expected to be called by other parts of u-boot, there
14763 should be a prototype for it in nand.h
14765 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14766 Signed-off-by: Stefan Roese <sr@denx.de>
14768 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
14769 Author: Wolfgang Denk <wd@denx.de>
14770 Date: Wed Jun 20 18:14:24 2007 +0200
14772 Coding style cleanup. Refresh CHANGELOG.
14774 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
14775 Author: Stefan Roese <sr@denx.de>
14776 Date: Tue Jun 19 17:22:44 2007 +0200
14778 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
14780 This patch adds a board command to configure the I2C bootstrap EEPROM
14781 values. Right now 533 and 667MHz are supported for booting either via NOR
14782 or NAND FLASH. Here the usage:
14784 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
14785 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
14787 Signed-off-by: Stefan Roese <sr@denx.de>
14789 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
14790 Author: Stefan Roese <sr@denx.de>
14791 Date: Tue Jun 19 16:42:31 2007 +0200
14793 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
14795 The latest changes showed a problem with the location of the NAND-SPL
14796 image in the OCM and the init-data area (incl. cache). This patch
14797 fixes this problem.
14799 Signed-off-by: Stefan Roese <sr@denx.de>
14801 commit 86ba99e34194394052d24c04dc40d1263d29a26f
14802 Author: Stefan Roese <sr@denx.de>
14803 Date: Tue Jun 19 16:40:58 2007 +0200
14805 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
14807 Signed-off-by: Stefan Roese <sr@denx.de>
14809 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
14810 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14811 Date: Mon Jun 18 13:50:13 2007 -0500
14813 Added M5329AFEE and M5329BFEE Platforms
14815 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
14816 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
14817 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
14820 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
14821 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
14822 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
14823 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
14824 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
14825 lib_m68k/time.c, net/eth.c and rtc/Makefile
14827 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14829 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
14830 Author: Michal Simek <monstr@monstr.eu>
14831 Date: Sun Jun 17 19:04:11 2007 +0200
14833 [fix] email reparation
14835 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
14836 Author: Michal Simek <monstr@monstr.eu>
14837 Date: Sun Jun 17 19:03:21 2007 +0200
14839 [FIX] fix microblaze file permitission
14841 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
14842 Author: Stefan Roese <sr@denx.de>
14843 Date: Fri Jun 15 11:33:41 2007 +0200
14845 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
14847 Now CONFIG_440 has to be defined in all PPC440 board config files.
14849 Signed-off-by: Stefan Roese <sr@denx.de>
14851 commit efa35cf12d914d4caba942acd5a6c45f217de302
14852 Author: Grzegorz Bernacki <gjb@semihalf.com>
14853 Date: Fri Jun 15 11:19:28 2007 +0200
14855 ppc4xx: Clean up 440 exceptions handling
14857 - Introduced dedicated switches for building 440 and 405 images required
14858 for 440-specific machine instructions like 'rfmci' etc.
14860 - Exception vectors moved to the proper location (_start moved away from
14861 the critical exception handler space, which it occupied)
14863 - CriticalInput now serviced (with default handler)
14865 - MachineCheck properly serviced (added a dedicated handler and return
14868 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
14869 unhandled and those not relevant for 4xx were eliminated)
14871 - Eliminated Linux leftovers, removed dead code
14873 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
14874 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
14875 Signed-off-by: Stefan Roese <sr@denx.de>
14877 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
14878 Author: Stefan Roese <sr@denx.de>
14879 Date: Fri Jun 15 08:18:01 2007 +0200
14881 [ppc4xx] Add initial lwmon5 board support
14883 This patch adds initial support for the Liebherr lwmon5 board euqipped
14884 with an AMCC 440EPx PowerPC.
14886 Signed-off-by: Stefan Roese <sr@denx.de>
14888 commit 85f737376d5ff3d5f0d45a8b657686326d175307
14889 Author: Stefan Roese <sr@denx.de>
14890 Date: Fri Jun 15 07:39:43 2007 +0200
14892 [ppc4xx] Extend 44x GPIO setup with default output state
14894 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
14895 is extended with the default GPIO output state (level).
14897 Signed-off-by: Stefan Roese <sr@denx.de>
14899 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
14900 Author: Stefan Roese <sr@denx.de>
14901 Date: Thu Jun 14 11:14:32 2007 +0200
14903 [ppc4xx] Extend program_tlb() with virtual & physical addresses
14905 Now program_tlb() allows to program a TLB (or multiple) with
14906 different virtual and physical addresses. With this change, now one
14907 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
14908 diabled and once with caches enabled.
14910 Signed-off-by: Stefan Roese <sr@denx.de>
14912 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
14913 Author: Detlev Zundel <dzu@denx.de>
14914 Date: Wed May 23 19:02:41 2007 +0200
14916 Change 'repeatable' attribute of some commands to sensible values.
14918 Most prominently this changes 'erase' to be non-repeatable.
14920 Signed-off-by: Detlev Zundel <dzu@denx.de>
14922 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
14923 Author: Detlev Zundel <dzu@denx.de>
14924 Date: Wed May 23 18:47:48 2007 +0200
14926 Fix 'run' not to continue after interrupted command
14928 Signed-off-by: Detlev Zundel <dzu@denx.de>
14930 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
14931 Author: Jason Jin <Jason.jin@freescale.com>
14932 Date: Mon Jun 11 15:14:24 2007 +0200
14934 USB: This patch fix readl in ohci swap reg access.
14936 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
14938 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
14939 Author: Bartlomiej Sieka <tur@semihalf.com>
14940 Date: Fri Jun 8 14:52:22 2007 +0200
14942 TQM5200: Add Flat Device Tree support, update default env. accordingly.
14944 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
14945 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
14947 commit 9045f33c023f698660a2e45d1b2194c0711abebc
14948 Author: Wolfgang Denk <wd@denx.de>
14949 Date: Fri Jun 8 10:24:58 2007 +0200
14951 Fix config problems on SC3 board; make ide_reset_timeout work.
14953 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
14954 Author: Benoît Monin <bmonin@adeneo.eu>
14955 Date: Fri Jun 8 09:55:24 2007 +0200
14957 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
14959 Set the correct value in GPIOx_TCR when configuring the gpio
14960 with CFG_440_GPIO_TABLE.
14962 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
14963 Signed-off-by: Stefan Roese <sr@denx.de>
14965 commit f539edc076cfe52bff919dd512ba8d7af0e22092
14966 Author: Vadim Bendebury <vbendeb@google.com>
14967 Date: Thu May 24 15:52:25 2007 -0700
14969 cosmetic changes to bcm570x driver
14971 This is a cosmetic only changes submission.
14972 It affects files relevant to bcm570x driver.
14973 the commands used to generate this change was
14976 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
14978 The BMW target (the only one using this chip so far) builds cleanly, the
14979 `before and after' generated object files for drivers/bcm570x.c and
14980 drivers/tigon3.o are identical as reported by objdump -d
14982 Signed-off-by: Vadim Bendebury <vbendeb@google.com>
14983 Signed-off-by: Ben Warren <bwarren@qstreams.com>
14985 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
14986 Author: Wolfgang Denk <wd@denx.de>
14987 Date: Wed Jun 6 16:26:56 2007 +0200
14989 Coding Style cleanup; generate new CHANGELOG file.
14991 Signed-off-by: Wolfgang Denk <wd@denx.de>
14993 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
14994 Author: Markus Klotzbuecher <mk@denx.de>
14995 Date: Wed Jun 6 11:49:44 2007 +0200
14997 TRAB, USB: update trab board configuration for use of generic ohci driver
14999 commit dace45acd1c1357daa9322099d07c9a9e08b0024
15000 Author: Markus Klotzbuecher <mk@denx.de>
15001 Date: Wed Jun 6 11:49:43 2007 +0200
15003 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
15005 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
15006 Author: Markus Klotzbuecher <mk@denx.de>
15007 Date: Wed Jun 6 11:49:43 2007 +0200
15009 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
15011 commit fc43be478f2aa37ce38acd85355038866e4162af
15012 Author: Markus Klotzbuecher <mk@denx.de>
15013 Date: Wed Jun 6 11:49:35 2007 +0200
15015 USB/OHCI: endianness cleanup in the generic ohci driver
15017 commit c440bfe6d6d92d66478a7e84402b31f48413617b
15018 Author: Stefan Roese <sr@denx.de>
15019 Date: Wed Jun 6 11:42:13 2007 +0200
15021 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
15023 This patch adds NAND booting support for the AMCC Acadia eval board.
15025 Please make sure to configure jumper J7 to position 2-3 when booting
15026 from NOR, and to position 1-2 when booting for NAND.
15028 I also added a board command to configure the I2C bootstrap EEPROM
15029 values. Right now only 267MHz is support for booting either via NOR
15030 or NAND FLASH. Here the usage:
15032 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
15033 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
15035 Signed-off-by: Stefan Roese <sr@denx.de>
15037 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
15038 Author: Rodolfo Giometti <giometti@linux.it>
15039 Date: Wed Jun 6 10:08:14 2007 +0200
15041 Files include/linux/byteorder/{big,little}_endian.h define
15042 __BIG_ENDIAN and __LITTLE_ENDIAN.
15044 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
15046 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
15047 Author: Zhang Wei <wei.zhang@freescale.com>
15048 Date: Wed Jun 6 10:08:14 2007 +0200
15050 Add USB PCI-OHCI, USB keyboard and event poll support to the
15051 MPC8641HPCN board config file.
15053 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
15055 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
15056 Author: Zhang Wei <wei.zhang@freescale.com>
15057 Date: Wed Jun 6 10:08:14 2007 +0200
15059 USB PCI-OHCI, interrupt pipe and usb event poll support
15061 This patch added USB PCI-OHCI chips support, interrupt pipe support
15062 and usb event poll support. For supporting the USB interrupt pipe, the
15063 globe urb_priv is moved to purb in ed struct. Now, we can process
15064 several urbs at one time. The interrupt pipe support codes are ported
15065 from Linux kernel 2.4.
15067 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
15069 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
15070 Author: Zhang Wei <wei.zhang@freescale.com>
15071 Date: Wed Jun 6 10:08:13 2007 +0200
15073 USB event poll support
15075 This patch adds USB event poll support, which could be used in usbkbd
15076 and other usb devices driver when the asynchronous interrupt
15077 processing is supported.
15079 Signed-off-by: Zhang Wei <wei.zhang@freescale.com
15081 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
15082 Author: Rodolfo Giometti <giometti@linux.it>
15083 Date: Wed Jun 6 10:08:12 2007 +0200
15085 ISP116x: delay for crappy USB keys
15087 Using some (very) slow USB keys cause the USB host controller buffers
15088 are not ready to be read by the CPU so we need an extra delay before
15089 reading the USB storage data.
15091 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
15093 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
15094 Author: Markus Klotzbuecher <mk@denx.de>
15095 Date: Wed Jun 6 10:08:12 2007 +0200
15097 Change duplicate usb_cpu_init_fail to usb_board_init_fail
15099 Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
15102 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
15104 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
15105 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
15106 Date: Tue Jun 5 12:30:52 2007 -0500
15108 mpc8641 image size cleanup
15110 e600 does not have a bootpg restriction.
15111 Move the version string to beginning of image at fff00000.
15112 Resetvec.S is not needed.
15113 Update flash copy instructions.
15114 Add tftpflash env variable
15116 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15117 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15119 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
15120 Author: Benoît Monin <bmonin@adeneo.eu>
15121 Date: Mon Jun 4 08:36:05 2007 +0200
15123 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
15125 The attached patch is mainly cosmetic, allowing u-boot to
15126 display the correct bootstrap option letter according to the
15129 The original patch was extended with 405EZ support by Stefan
15132 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
15133 Signed-off-by: Stefan Roese <sr@denx.de>
15135 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
15136 Author: Nikita V. Youshchenko <yoush@debian.org>
15137 Date: Wed May 23 12:45:19 2007 +0400
15139 fix compilation problem for mpc8349itx CFG_RAMBOOT
15141 Current include/configs/MPC8349ITX.h does contain some support for building
15142 image that will be started from memory (without putting in into flash).
15143 It could be triggered by building with TEXT_BASE set to a low value.
15145 However, this support is incomplete: using of low TEXT_BASE causes
15146 defining configuration macros in inconsistent way, which later leads
15147 to compilation errors. In particular. flash support is being disabled,
15148 but then flash structures get referenced.
15150 This patch fixes this, making it possible to build with low TEXT_BASE.
15152 Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
15154 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15156 commit 8a364f0970de49949d635e60accf463c6443ef8c
15157 Author: Nikita V. Youshchenko <yoush@debian.org>
15158 Date: Wed May 23 12:45:25 2007 +0400
15160 add missing 'console' var to default mpc8349itx config
15162 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15164 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
15165 Author: Stefan Roese <sr@denx.de>
15166 Date: Fri Jun 1 16:18:17 2007 +0200
15168 ppc4xx: Add missing file for Bamboo NAND booting support
15170 Signed-off-by: Stefan Roese <sr@denx.de>
15172 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
15173 Author: Stefan Roese <sr@denx.de>
15174 Date: Fri Jun 1 15:58:19 2007 +0200
15176 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
15178 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
15179 suggested by AMCC it is not recommended to dynamically change the EBC
15180 speed after bootup. So we undo this change to be on the safe side.
15182 Signed-off-by: Stefan Roese <sr@denx.de>
15184 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
15185 Author: Stefan Roese <sr@denx.de>
15186 Date: Fri Jun 1 15:29:04 2007 +0200
15188 ppc4xx: Update Sequoia NAND booting support with ECC
15190 Signed-off-by: Stefan Roese <sr@denx.de>
15192 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
15193 Author: Stefan Roese <sr@denx.de>
15194 Date: Fri Jun 1 15:27:11 2007 +0200
15196 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
15198 This patch adds NAND booting support for the AMCC Bamboo eval board.
15199 Since the NAND-SPL boot image is limited to 4kbytes, this version
15200 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
15201 supported, since the setup code for I2C DIMM autodetection and
15202 configuration is too big for this NAND bootloader.
15204 Signed-off-by: Stefan Roese <sr@denx.de>
15206 commit 42be56f53c8b107868e6125c8524ae84293e95a7
15207 Author: Stefan Roese <sr@denx.de>
15208 Date: Fri Jun 1 15:23:04 2007 +0200
15210 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
15212 The U-Boot NAND booting support is now extended to support ECC
15213 upon loading of the NAND U-Boot image.
15215 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
15217 Signed-off-by: Stefan Roese <sr@denx.de>
15219 commit a471db07fbb65a841ffc9f4f112562b945230f98
15220 Author: Stefan Roese <sr@denx.de>
15221 Date: Fri Jun 1 15:19:29 2007 +0200
15223 ppc4xx: Prepare Bamboo port for NAND booting support
15225 This patch updates the "normal" Bamboo NOR booting port, so
15226 that it is compatible with the coming soon NAND booting
15229 It also enables the 2nd NAND flash on the Bamboo.
15231 Signed-off-by: Stefan Roese <sr@denx.de>
15233 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
15234 Author: Stefan Roese <sr@denx.de>
15235 Date: Fri Jun 1 15:16:58 2007 +0200
15237 ppc4xx: Update in_be32() functions and friends to latest Linux version
15239 Signed-off-by: Stefan Roese <sr@denx.de>
15241 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
15242 Author: Stefan Roese <sr@denx.de>
15243 Date: Fri Jun 1 15:15:12 2007 +0200
15245 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
15247 This patch adds hardware ECC support to the NDFC driver. It also
15248 changes the register access from using the "simple" in32/out32
15249 functions to the in_be32/out_be32 functions, which make sure
15250 that the access is correctly synced. This is the only recommended
15251 access to SoC registers in the current Linux kernel.
15253 Signed-off-by: Stefan Roese <sr@denx.de>
15255 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
15256 Author: Stefan Roese <sr@denx.de>
15257 Date: Fri Jun 1 15:12:15 2007 +0200
15259 NAND: Update nand_ecc.c to latest Linux version
15261 This patch updates the nand_ecc code to the latest Linux version.
15262 The main reason for this is the more compact code. This makes
15263 it possible to include the ECC code into the NAND bootloader
15264 image (NAND_SPL) for PPC4xx.
15266 Signed-off-by: Stefan Roese <sr@denx.de>
15268 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
15269 Author: Stefan Roese <sr@denx.de>
15270 Date: Fri Jun 1 15:09:50 2007 +0200
15272 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
15274 Signed-off-by: Stefan Roese <sr@denx.de>
15276 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
15277 Author: Stefan Roese <sr@denx.de>
15278 Date: Fri Jun 1 13:45:24 2007 +0200
15280 ppc4xx: Change Luan config file to support ECC
15282 With the updated 44x DDR2 driver the Luan board now supports
15283 ECC generation and checking.
15285 Signed-off-by: Stefan Roese <sr@denx.de>
15287 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
15288 Author: Stefan Roese <sr@denx.de>
15289 Date: Fri Jun 1 13:45:00 2007 +0200
15291 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
15293 Add config option for 180 degree advance clock control as needed
15294 for the AMCC Luan eval board.
15296 Signed-off-by: Stefan Roese <sr@denx.de>
15298 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
15299 Author: Wolfgang Denk <wd@denx.de>
15300 Date: Thu May 31 17:20:09 2007 +0200
15302 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
15304 Signed-off-by: Wolfgang Denk <wd@denx.de>
15306 commit 7049288fb1f16f1b317140226cdebd07bd416395
15307 Author: Bartlomiej Sieka <tur@semihalf.com>
15308 Date: Sun May 27 17:26:46 2007 +0200
15310 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
15312 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
15314 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
15315 Author: Bartlomiej Sieka <tur@semihalf.com>
15316 Date: Sun May 27 17:06:36 2007 +0200
15318 Motion-PRO: Add support for redundant environment.
15320 Enable redundant environment, add a MTD partition for it; also add env.
15321 variable command for passing MTD partitions to the kernel command line.
15323 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
15324 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
15326 commit a26eabeec31746f06d309103690892805696e344
15327 Author: Bartlomiej Sieka <tur@semihalf.com>
15328 Date: Sun May 27 17:05:11 2007 +0200
15330 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
15332 Allow passing longer command line to the kernel - useful especially
15333 for passing MTD partition layout.
15335 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
15336 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
15338 commit 9160b96f71483a116de81c68985e8ee306d36764
15339 Author: Bartlomiej Sieka <tur@semihalf.com>
15340 Date: Sun May 27 17:04:18 2007 +0200
15342 Fix: Add missing NULL termination in strings expanded by macros parser.
15344 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
15345 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
15347 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
15348 Author: Bartlomiej Sieka <tur@semihalf.com>
15349 Date: Sun May 27 17:03:37 2007 +0200
15351 Motion-PRO: Update EEPROM's page write bits and write delay.
15353 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
15354 have a page write capability of two bytes", and "This device offers fast (1ms)
15355 byte write". Add 3ms of extra delay.
15357 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
15358 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
15360 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
15361 Author: Bartlomiej Sieka <tur@semihalf.com>
15362 Date: Sun May 27 16:58:45 2007 +0200
15364 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
15366 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
15367 networking does not function. This commit switches PHY to TX mode by clearing
15368 the FX_SEL bit of Mode Control Register. It also reverses commit
15369 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
15371 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
15372 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
15374 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
15375 Author: Bartlomiej Sieka <tur@semihalf.com>
15376 Date: Sun May 27 16:57:15 2007 +0200
15378 Motion-PRO: Add support for the temperature sensor.
15380 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
15381 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
15383 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
15384 Author: Bartlomiej Sieka <tur@semihalf.com>
15385 Date: Sun May 27 16:55:23 2007 +0200
15387 Motion-PRO: Add displaying of CPLD revision information during boot.
15389 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
15390 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
15392 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
15393 Author: Bartlomiej Sieka <tur@semihalf.com>
15394 Date: Sun May 27 16:53:43 2007 +0200
15396 MPC5xxx: Change names of defines related to IPB and PCI clocks.
15398 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
15399 them does not cause PCI or IPB clocks to run at the specified speed.
15400 Instead, they configure divisors used to calculate said clocks. This
15401 patch renames the defines according to their real function.
15403 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
15404 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
15406 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
15407 Author: Bartlomiej Sieka <tur@semihalf.com>
15408 Date: Sun May 27 16:51:48 2007 +0200
15410 Motion-PRO: Add LED support.
15412 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
15413 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
15414 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
15416 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
15417 Author: Ulf Samuelsson <ulf@atmel.com>
15418 Date: Thu May 24 12:12:47 2007 +0200
15420 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
15422 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
15423 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
15424 Signed-off-by: Stefan Roese <sr@denx.de>
15426 commit d756894722c888d09a9fa1df8323753772d3dcce
15427 Author: Stefan Roese <sr@denx.de>
15428 Date: Thu May 24 09:49:00 2007 +0200
15430 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
15432 As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
15433 fixes a small bug in the 405EZ OCM initialization. Thanks for
15436 Signed-off-by: Stefan Roese <sr@denx.de>
15438 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
15439 Author: Stefan Roese <sr@denx.de>
15440 Date: Thu May 24 08:22:09 2007 +0200
15442 ppc4xx: Update AMCC Acadia support for board revision 1.1
15444 This patch updates the Acadia (405EZ) support for the new 1.1 board
15445 revision. It also adds support for NAND FLASH via the 4xx NDFC.
15447 Please note that the jumper J7 must be in position 2-3 for this
15448 NAND support. Position 1-2 is for NAND booting only. NAND booting
15449 support will follow later.
15451 Signed-off-by: Stefan Roese <sr@denx.de>
15453 commit 822d55365bb557e084d0e33625a6dedcc866110b
15454 Author: Jon Loeliger <jdl@freescale.com>
15455 Date: Wed May 23 14:09:46 2007 -0500
15457 Add LIST_86xx MAKEALL target for PowerPC builds.
15459 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15461 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
15462 Author: Stefan Roese <sr@denx.de>
15463 Date: Tue May 22 12:48:09 2007 +0200
15465 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
15467 Signed-off-by: Stefan Roese <sr@denx.de>
15469 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
15470 Author: Stefan Roese <sr@denx.de>
15471 Date: Tue May 22 12:46:10 2007 +0200
15473 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
15475 This patch adds support for 405 PPC's to the 4xx NAND driver
15476 ndfc.c. This is in preparation for the new AMCC 405EZ.
15478 Signed-off-by: Stefan Roese <sr@denx.de>
15480 commit 10603d76767426be803dadd4fb688b97eb69481c
15481 Author: Stefan Roese <sr@denx.de>
15482 Date: Mon May 21 07:41:22 2007 +0200
15484 ppc4xx: Fix problem in 405EZ OCM initialization
15486 As spotted by Bruce Adler this patch fixes an initialization problem
15489 Signed-off-by: Stefan Roese <sr@denx.de>
15491 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
15492 Author: Peter Pearse <peter.pearse@arm.com>
15493 Date: Fri May 18 16:47:03 2007 +0100
15495 Reduce line lengths to 80 characters max.
15497 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
15498 Author: Peter Pearse <peter.pearse@arm.com>
15499 Date: Fri May 18 14:34:07 2007 +0100
15501 Makefile permissions
15503 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
15504 Author: Peter Pearse <peter.pearse@arm.com>
15505 Date: Fri May 18 14:33:11 2007 +0100
15507 Makefile permissions
15509 commit 255a3577c848706441daee0174543efe205a77f8
15510 Author: Kim Phillips <kim.phillips@freescale.com>
15511 Date: Wed May 16 16:52:19 2007 -0500
15513 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
15515 For all practical u-boot purposes, TSECs don't differ throughout the
15516 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
15518 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15520 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
15521 Author: Stefano Babic <sbabic@denx.de>
15522 Date: Wed May 16 14:49:12 2007 +0200
15524 Fix compile problem cause my Microblaze merge
15526 Signed-off-by: Stefano Babic <sbabic@denx.de>
15528 commit ada4697d0230d6da552867777f98a67ec3ba2579
15529 Author: Jeffrey Mann <mannj@embeddedplanet.com>
15530 Date: Wed May 16 13:23:10 2007 +0200
15532 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
15534 Because the Sequoia board does not boot with an EBC faster than 66MHz,
15535 the clock divider are changed after the initial boot process.
15537 This allows for maximum clocking speeds to be achieved on newer boards.
15538 Sequoia boards with 666.66 MHz processors require that the EBC divider
15539 be set to 3 in order to start the initial boot process at a slower EBC
15540 speed. After the initial boot process, the divider can be set back to 2,
15541 which will cause the boards to run at 83.333MHz. This is backward
15542 compatible with boards with 533.33 MHz processors, as these boards will
15543 already be set with an EBC divider of 2.
15545 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
15547 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
15548 Author: Wolfgang Denk <wd@denx.de>
15549 Date: Wed May 16 01:16:53 2007 +0200
15551 Minor Coding Style cleanup, update CHANGELOG.
15553 Signed-off-by: Wolfgang Denk <wd@denx.de>
15555 commit d62f64cc23a940eafe712c776b3249e4160753d1
15556 Author: Wolfgang Denk <wd@denx.de>
15557 Date: Wed May 16 00:13:33 2007 +0200
15559 Coding Style Cleanup, new CHANGELOG
15561 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
15562 Author: Wolfgang Denk <wd@denx.de>
15563 Date: Tue May 15 23:38:05 2007 +0200
15565 Minor coding style cleanup.
15567 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
15568 Author: mushtaq khan <mushtaq_k@procsys.com>
15569 Date: Fri Apr 20 14:23:02 2007 +0530
15571 Add driver for S-ATA-controller on Intel processors with South
15572 Bridge, ICH-5, ICH-6 and ICH-7.
15576 1. Code is divided in to two files. All functions, which are
15577 controller specific are kept in "drivers/ata_piix.c" file and
15578 functions, which are not controller specific, are kept in
15579 "common/cmd_sata.c" file.
15581 2. Reading and Writing from the S-ATA drive is done using PIO method.
15583 3. Driver can be configured for 48-bit addressing by defining macro
15584 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
15587 4. S-ATA read function is hooked to the File system, commands like
15588 ext2ls and ext2load file can be used. This has been tested.
15590 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
15591 controller and identifies the S-ATA drives connected to it.
15593 6. U-Boot command "sata" is added, which is used to read/write, print
15594 partition table and get info about the drives present. This I have
15595 implemented in same way as "ide" command is implemented in U-Boot.
15597 7. This driver is for S-ATA in native mode.
15599 8. This driver does not support the Native command queuing and
15602 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
15604 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
15605 Author: mushtaq khan <mushtaq_k@procsys.com>
15606 Date: Mon Apr 30 15:57:22 2007 +0530
15608 Fixes bug clearing the bss section for i386
15611 There is a bug in the code of clearing the bss section for processor
15612 i386.(File: cpu/i386/start.S)
15613 In the code, bss_start addr (starting addr of bss section) is put into
15614 the register %eax, but the code which clears the bss section refers to
15615 the addr pointed by %edi.
15617 This patch fixes this bug by putting bss_start into %edi register.
15619 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
15621 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
15622 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
15623 Date: Mon Apr 30 16:47:28 2007 -0500
15625 Add support for BCM5464 Quad Phy
15627 Added support for Broadcom's BCM5464 Quad Phy
15629 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
15631 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
15632 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
15633 Date: Wed May 9 08:10:57 2007 +0800
15635 Search the exception table with linear algorithm
15637 Search the exception table with linear algorithm instead of
15638 bisecting algorithm.
15639 Because the exception table might be unsorted.
15641 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
15643 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
15644 Author: Aubrey.Li <aubrey.adi@gmail.com>
15645 Date: Mon May 14 11:47:35 2007 +0800
15647 Fix compilation issues on MACOSX
15649 Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
15650 Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
15652 commit 56fd7162985c412317bbf763a225fba23c64fd31
15653 Author: Stephen Williams <steve@icarus.com>
15654 Date: Tue May 15 07:55:42 2007 -0700
15656 Fix for compile of JSE target
15658 The attached patch fixes the compile of the JSE board in the
15659 denx git as of 14 may 2007. It is an extremely simple patch,
15660 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
15662 Fix to compile JSE against 20070514 git of u-boot
15664 commit 69df3c4da0c93017cceb25a366e794570bd0ed98
15665 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
15666 Date: Sun May 13 21:01:03 2007 +0900
15668 sh: MS7750SE support.
15670 This adds support for the Hitachi MS7750SE.
15672 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15674 commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
15675 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
15676 Date: Sun May 13 20:58:00 2007 +0900
15678 sh: First support code of SuperH.
15680 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
15682 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
15683 Author: Stefan Roese <sr@denx.de>
15684 Date: Fri May 11 12:01:49 2007 +0200
15686 ppc4xx: Add mtcpr/mfcpr access macros
15688 Signed-off-by: Stefan Roese <sr@denx.de>
15690 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
15691 Author: Stefan Roese <sr@denx.de>
15692 Date: Fri May 11 12:01:06 2007 +0200
15694 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
15696 Signed-off-by: Stefan Roese <sr@denx.de>
15698 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
15699 Author: Piotr Kruszynski <ppk@semihalf.com>
15700 Date: Thu May 10 16:55:52 2007 +0200
15702 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
15705 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
15706 Author: Peter Pearse <peter.pearse@arm.com>
15707 Date: Wed May 9 11:42:44 2007 +0100
15709 Add the board directory for SMN42
15711 commit 160131bf965785419626df6c388729fe0b597992
15712 Author: Peter Pearse <peter.pearse@arm.com>
15713 Date: Wed May 9 11:41:58 2007 +0100
15715 Add the files for the SMN42 board
15717 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
15718 Author: Peter Pearse <peter.pearse@arm.com>
15719 Date: Wed May 9 11:40:34 2007 +0100
15721 Remove the deleted files for the SMN42 patch
15723 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
15724 Author: Peter Pearse <peter.pearse@arm.com>
15725 Date: Wed May 9 11:37:56 2007 +0100
15727 New board SMN42 branch
15729 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
15730 Author: Peter Pearse <peter.pearse@arm.com>
15731 Date: Wed May 9 10:24:38 2007 +0100
15733 Makefile permissions
15735 commit b84289b595731e8851df46e893845cc1322c9b9b
15736 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
15737 Date: Tue May 8 14:17:07 2007 -0500
15739 8641hpcn: Fix Makefile after moving pixis to board/freescale.
15741 The OBJTREE != SRCTREE build scenario was broken.
15744 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15745 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15747 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
15748 Author: Michal Simek <monstr@monstr.eu>
15749 Date: Tue May 8 15:57:43 2007 +0200
15751 add: reading special purpose registers
15753 commit 1a50f164beb065f360fbddb76029607d6b099698
15754 Author: Michal Simek <monstr@monstr.eu>
15755 Date: Tue May 8 14:52:52 2007 +0200
15757 add: Microblaze V5 exception handling
15759 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
15760 Author: Michal Simek <monstr@monstr.eu>
15761 Date: Tue May 8 14:39:11 2007 +0200
15763 add: FSL control read and write
15765 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
15766 Author: Piotr Kruszynski <ppk@semihalf.com>
15767 Date: Tue May 8 13:05:44 2007 +0200
15769 [Motion-PRO] Add support for I2C, EEPROM and RTC.
15771 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
15772 Author: Bartlomiej Sieka <tur@semihalf.com>
15773 Date: Tue May 8 10:23:56 2007 +0200
15775 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
15778 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
15779 Author: Bartlomiej Sieka <tur@semihalf.com>
15780 Date: Tue May 8 09:39:12 2007 +0200
15782 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
15783 eliminates networking problems in Linux (timeouts).
15785 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
15786 Author: Bartlomiej Sieka <tur@semihalf.com>
15787 Date: Tue May 8 09:21:57 2007 +0200
15789 [Motion-PRO] Enable Flat Device Tree support and modify default environment
15790 to allow booting of FDT-expecting kernels.
15792 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
15793 Author: Michal Simek <monstr@monstr.eu>
15794 Date: Mon May 7 23:58:31 2007 +0200
15796 new: USE_MSR_INTR support
15798 commit 008861a2f3ef2c062744d733787c7e530a1b8761
15799 Author: Bartlomiej Sieka <tur@semihalf.com>
15800 Date: Mon May 7 22:36:15 2007 +0200
15802 [MPC5xxx] There are networking problems on the Motion-PRO board with
15803 current PHY initalization code (tftp timeouts all the time). This commit
15804 temporarily disables PHY initalization sequence to make the networking
15805 operational, until a fix is found.
15807 commit abca901869c3760b6c5fecb825db6c1d91a78a93
15808 Author: Wolfgang Denk <wd@denx.de>
15809 Date: Mon May 7 22:10:36 2007 +0200
15811 Get rid of duplicated file (see include/configs/sbc8560.h instead)
15813 Signed-off-by: Wolfgang Denk <wd@denx.de>
15815 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
15816 Author: Wolfgang Denk <wd@denx.de>
15817 Date: Mon May 7 22:07:08 2007 +0200
15819 Get rid of duplicated file (see doc/README.SBC8560 instead)
15821 Signed-off-by: Wolfgang Denk <wd@denx.de>
15823 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
15824 Author: Michal Simek <monstr@monstr.eu>
15825 Date: Mon May 7 19:43:10 2007 +0200
15827 fix: read and write MSR - repair number of parameters
15829 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
15830 Author: Jeffrey Mann <mannj@embeddedplanet.com>
15831 Date: Mon May 7 19:42:49 2007 +0200
15833 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
15835 A '3' got cut off in the formatting of the last patch to automatically
15836 change the clock speed of the system clock on sequoia board.
15838 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
15839 Signed-off-by: Stefan Roese <sr@denx.de>
15841 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
15842 Author: Michal Simek <monstr@monstr.eu>
15843 Date: Mon May 7 19:33:51 2007 +0200
15845 new: fsl interrupt support
15846 FSL_Has_data is connected to INTC.
15848 commit 792032baa7d625e34c981ab6df521911bd8dc861
15849 Author: Michal Simek <monstr@monstr.eu>
15850 Date: Mon May 7 19:30:12 2007 +0200
15852 fix: interrupt handler
15855 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
15856 Author: Michal Simek <monstr@monstr.eu>
15857 Date: Mon May 7 19:25:08 2007 +0200
15859 fix: remove asm code
15861 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
15862 Author: Michal Simek <monstr@monstr.eu>
15863 Date: Mon May 7 19:12:43 2007 +0200
15865 fix: clean interrupt
15867 commit 42efed6130c8fcf7da881385b5427065d2801757
15868 Author: Michal Simek <monstr@monstr.eu>
15869 Date: Mon May 7 17:22:25 2007 +0200
15871 fix: interrupt handler for multiple sources
15873 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
15874 Author: Michal Simek <monstr@monstr.eu>
15875 Date: Mon May 7 17:11:09 2007 +0200
15877 new: add writing to msr register
15879 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
15880 Author: Markus Klotzbuecher <mk@denx.de>
15881 Date: Mon May 7 16:43:56 2007 +0200
15883 Fix an ancient CHANGELOG conflict
15885 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
15886 Author: Timur Tabi <timur@freescale.com>
15887 Date: Sat May 5 08:12:30 2007 +0200
15889 5xxx: write MAC address to mac-address and local-mac-address
15891 Some device trees have a mac-address property, some have local-mac-address,
15892 and some have both. To support all of these device trees, ftp_cpu_setup()
15893 should write the MAC address to mac-address and local-mac-address, if they
15896 Signed-off-by: Timur Tabi <timur@freescale.com>
15897 Acked-by: Grant Likely <grant.likely@secretlab.ca>
15899 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
15900 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
15901 Date: Sun Apr 29 14:01:54 2007 +0200
15903 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
15905 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
15906 message. Use PVR to distinguish between the two variants, and print proper CPU
15909 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
15910 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
15911 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15913 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
15914 Author: Ladislav Michl <ladis@linux-mips.org>
15915 Date: Wed Apr 25 16:01:26 2007 +0200
15917 [PATCH] simplify silent console
15919 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
15920 Acked-by: Stefan Roese <sr@denx.de>
15922 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
15923 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
15924 Date: Mon Apr 23 15:30:39 2007 +0200
15926 [PATCH] Avoid assigning PCI resources from zero address
15928 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
15929 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
15930 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
15931 sentence about "0" being considered an invalid address) -- so, use a reasonable
15932 starting value of 0x1000 (that's what the most Linux archs are using).
15934 Alternatively, one might have fixed the calls to pci_set_region() individually
15935 (some code even seems to have taken care of this issue) but that would have
15936 been a lot more work. :-)
15938 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
15939 Acked-by: Stefan Roese <sr@denx.de>
15941 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
15942 Author: Jeffrey Mann <mannj@embeddedplanet.com>
15943 Date: Mon Apr 23 14:00:11 2007 +0200
15945 [patch] setenv(...) can delete environmentalvariables
15947 update setenv() function so that entering a NULL value for the
15948 variable's value will delete the environmental variable
15950 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
15951 Acked-by: Stefan Roese <sr@denx.de>
15953 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
15954 Author: Mike Frysinger <vapier@gentoo.org>
15955 Date: Mon Apr 23 13:54:24 2007 +0200
15957 [patch] use unsigned char in smc91111 driver for mac
15959 the v_mac variable in the smc91111 driver is declared as a signed char ...
15960 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
15961 because when it gets printed out, you get a display like:
15962 0xFFFFFFE0 and that's no good
15964 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15966 commit ffc50f9bb194343c6303517a517708457a5eb6b8
15967 Author: Michal Simek <monstr@monstr.eu>
15968 Date: Sat May 5 18:54:42 2007 +0200
15970 new: FSL and MSR support #2
15972 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
15973 Author: Michal Simek <monstr@monstr.eu>
15974 Date: Sat May 5 18:27:16 2007 +0200
15976 new: FSL and MSR support
15978 commit 2f15278c2eb911c668b4fe562130b78cf554d139
15979 Author: Wolfgang Denk <wd@denx.de>
15980 Date: Sat May 5 18:23:11 2007 +0200
15982 Coding stylke cleanup; update CHANGELOG.
15984 Signed-off-by: Wolfgang Denk <wd@denx.de>
15986 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
15987 Author: Wolfgang Denk <wd@denx.de>
15988 Date: Sat May 5 18:05:02 2007 +0200
15990 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
15992 Signed-off-by: Wolfgang Denk <wd@denx.de>
15994 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
15995 Author: Wolfgang Denk <wd@denx.de>
15996 Date: Sat May 5 17:15:50 2007 +0200
15998 Make "file" command happy with some config.mk files; update CHANGELOG
16000 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
16001 Author: Jeffrey Mann <mannj@embeddedplanet.com>
16002 Date: Sat May 5 08:32:14 2007 +0200
16004 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
16006 The AMCC Secquoia board has been changed in a new revision from using a
16007 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
16008 indicates the difference. This patch reads that bit and uses the correct
16009 clock speed for the board. This code is backward compatable will all
16010 prior boards. All prior boards will be read as 33.000.
16012 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
16013 Signed-off-by: Stefan Roese <sr@denx.de>
16015 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
16016 Author: Stefan Roese <sr@denx.de>
16017 Date: Sat May 5 08:29:01 2007 +0200
16019 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
16021 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
16022 for the 4k NAND boot image so define bus_frequency to 133MHz here
16023 which is save for the refresh counter setup.
16025 Signed-off-by: Stefan Roese <sr@denx.de>
16027 commit 2f550ab976405300f5b07bf2890800840d0aa05f
16028 Author: Timur Tabi <timur@freescale.com>
16029 Date: Sat May 5 08:12:30 2007 +0200
16031 5xxx: write MAC address to mac-address and local-mac-address
16033 Some device trees have a mac-address property, some have local-mac-address,
16034 and some have both. To support all of these device trees, ftp_cpu_setup()
16035 should write the MAC address to mac-address and local-mac-address, if they
16038 Signed-off-by: Timur Tabi <timur@freescale.com>
16039 Acked-by: Grant Likely <grant.likely@secretlab.ca>
16041 commit a79886590593ba1d667c840caa4940c61639f18f
16042 Author: Thomas Knobloch <knobloch@siemens.com>
16043 Date: Sat May 5 07:04:42 2007 +0200
16045 NAND: Wrong calculation of page number in nand_block_bad()
16047 In case that there is no memory based bad block table available the
16048 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
16049 nand_block_bad() directly. When parameter 'getchip' is set to zero,
16050 nand_block_bad() will not right shift the offset to calculate the
16051 correct page number.
16053 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
16054 Signed-off-by: Stefan Roese <sr@denx.de>
16056 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
16057 Author: Wolfgang Denk <wd@denx.de>
16058 Date: Fri May 4 10:02:33 2007 +0200
16060 Fix initrd length corruption in bootm command.
16062 When using FDT Images, the length of an inital ramdisk was
16063 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
16065 Patches by Timur Tabi & Johns Daniel.
16067 Signed-off-by: Wolfgang Denk <wd@denx.de>
16069 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
16070 Author: Kim Phillips <kim.phillips@freescale.com>
16071 Date: Thu May 3 19:43:52 2007 -0500
16073 mpc83xx: fix trivial error in MAKEALL
16075 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16077 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
16078 Author: Wolfgang Denk <wd@denx.de>
16079 Date: Thu May 3 16:34:41 2007 +0200
16081 Update board configuration for STX GP3SSA board:
16083 Enable hush shell, environment in flash rather in EEPROM,
16084 more user-friendly default environment, etc.
16085 The simple EEPROM environment can be selected easily in the board
16088 Signed-off-by: Wolfgang Denk <wd@denx.de>
16090 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
16091 Author: Wolfgang Denk <wd@denx.de>
16092 Date: Tue Apr 24 14:37:49 2007 +0200
16094 Cleanup STX GP3SSA code; fix build and compile problems.
16096 commit 35171dc04e028ecacc23ad916a66295472555dbf
16097 Author: Dan Malek <dan@embeddedalley.com>
16098 Date: Fri Jan 5 09:15:34 2007 +0100
16100 Add support for STX GP3SSA (stxssa) Board
16102 Signed-off-by Dan Malek, <dan@embeddedalley.com>
16104 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
16105 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16106 Date: Wed May 2 13:31:53 2007 +0200
16108 macb: Don't restart autonegotiation if we already have link
16110 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
16111 link is already up.
16113 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16115 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
16116 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16117 Date: Wed May 2 13:22:38 2007 +0200
16119 macb: Introduce a few barriers when dealing with DMA descriptors
16121 There were a few theoretical possibilities that the compiler might
16122 optimize away DMA descriptor reads and/or writes and thus cause
16123 synchronization problems with the hardware. Insert barriers where
16124 we depend on reads/writes actually hitting memory.
16126 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16128 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
16129 Author: Andy Fleming <afleming@freescale.com>
16130 Date: Sat Feb 24 01:08:13 2007 -0600
16132 Cleaned up some 85xx PCI bugs
16134 * Cleaned up the CDS PCI Config Tables and added NULL entries to
16136 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
16137 * Fixed 85xx PCI code to assign powar region sizes based on the
16138 config values (rather than hard-coding them)
16139 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
16141 Signed-off-by: Andy Fleming <afleming@freescale.com>
16143 commit 6743105988fc44d5b0d30388c790607835aae7a6
16144 Author: Andy Fleming <afleming@freescale.com>
16145 Date: Mon Apr 23 02:54:25 2007 -0500
16147 Add support for the 8568 MDS board
16149 This included some changes to common files:
16150 * Add 8568 processor SVR to various places
16151 * Add support for setting the qe bus-frequency value in the dts
16152 * Add the 8568MDS target to the Makefile
16154 Signed-off-by: Andy Fleming <afleming@freescale.com>
16156 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
16157 Author: David Updegraff <dave@cray.com>
16158 Date: Fri Apr 20 14:34:48 2007 -0500
16160 Add support for treating unknown PHYs as generic PHYs.
16162 When bringing up u-boot on new boards, PHY support sometimes gets
16163 neglected. Most PHYs don't really need any special support,
16164 though. By adding a generic entry that always matches if nothing
16165 else does, we can provide support for "unsupported" PHYs for the
16168 The generic PHY driver supports most PHYs, including gigabit.
16170 Signed-off-by: David Updegraff <dave@cray.com>
16171 Signed-off-by: Andy Fleming <afleming@freescale.com>
16173 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
16174 Author: James Yang <James.Yang@freescale.com>
16175 Date: Wed Feb 7 15:28:04 2007 -0600
16177 Conditionalize 8641 Rev1.0 MCM workarounds
16179 Signed-off-by: James Yang <James.Yang@freescale.com>
16180 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16182 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
16183 Author: Timur Tabi <timur@freescale.com>
16184 Date: Mon Apr 30 13:59:50 2007 -0500
16186 Fix memory initialization on MPC8349E-mITX
16188 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
16189 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
16190 on some ITX boards, notably those with a revision 3.1 CPU.
16192 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
16193 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
16195 Signed-off-by: Timur Tabi <timur@freescale.com>
16196 Acked-by: Michael Benedict <MBenedict@twacs.com>
16197 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16199 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
16200 Author: Kim Phillips <kim.phillips@freescale.com>
16201 Date: Mon Apr 30 15:26:21 2007 -0500
16203 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
16205 and fix CPU: to align with Board: display text.
16207 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16209 commit c1ab82669d9525998c34e802a12cad662723f22a
16210 Author: James Yang <James.Yang@freescale.com>
16211 Date: Fri Mar 16 13:02:53 2007 -0500
16213 Rewrote picos_to_clk() to avoid rounding errors.
16214 Clarified that conversion is to DRAM clocks rather than platform clocks.
16215 Made function static to spd_sdram.c.
16217 Signed-off-by: James Yang <James.Yang@freescale.com>
16218 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16220 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
16221 Author: Stefan Roese <sr@denx.de>
16222 Date: Sun Apr 29 14:13:01 2007 +0200
16224 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
16226 Signed-off-by: Stefan Roese <sr@denx.de>
16228 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
16229 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
16230 Date: Sun Apr 29 14:01:54 2007 +0200
16232 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
16234 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
16235 message. Use PVR to distinguish between the two variants, and print proper CPU
16238 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
16239 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
16240 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
16242 commit 5c5d3242935cf3543af01142627494434834cf98
16243 Author: Kim Phillips <kim.phillips@freescale.com>
16244 Date: Wed Apr 25 12:34:38 2007 -0500
16246 mpc83xx: minor fixups for 8313rdb introduction
16248 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
16249 Author: Ladislav Michl <ladis@linux-mips.org>
16250 Date: Wed Apr 25 16:01:26 2007 +0200
16252 [PATCH] simplify silent console
16254 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
16255 Acked-by: Stefan Roese <sr@denx.de>
16257 commit 144876a380f5756f57412caf74c1d6dc201dd796
16258 Author: Michal Simek <monstr@monstr.eu>
16259 Date: Tue Apr 24 23:01:02 2007 +0200
16261 [PATCH] MTD partition support, JFFS2 support
16263 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
16264 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16265 Date: Tue Apr 24 14:03:45 2007 +0200
16267 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
16269 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16271 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
16272 Author: Andy Fleming <afleming@freescale.com>
16273 Date: Mon Apr 23 02:37:47 2007 -0500
16275 Reworked 85xx speed detection code
16277 Changed the code to read the registers and calculate the clock
16278 rates, rather than using a "switch" statement.
16280 Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
16282 Signed-off-by: Andy Fleming <afleming@freescale.com>
16284 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
16285 Author: Andy Fleming <afleming@freescale.com>
16286 Date: Mon Apr 23 02:24:28 2007 -0500
16288 Enable 8544 support
16290 * Add support to the Makefile
16291 * Add 8544 configuration support to the tsec driver
16292 * Add 8544 SVR numbers to processor.h
16294 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16295 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16297 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
16298 Author: Andy Fleming <afleming@freescale.com>
16299 Date: Fri Feb 23 17:12:25 2007 -0600
16301 Support 1G size on 8548
16303 e500v2 and newer cores support 1G page sizes.
16305 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16306 Signed-off-by: Andy Fleming <afleming@freescale.com>
16308 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
16309 Author: Andy Fleming <afleming@freescale.com>
16310 Date: Fri Feb 23 17:11:16 2007 -0600
16312 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
16314 The other pagesz constants use one letter to specify order of
16315 magnitude. Also change the one reference to it in mpc8548cds/init.S
16317 Signed-off-by: Andy Fleming <afleming@freescale.com>
16319 commit 1f9a318cea14272edd10d63739e2d326c90f430e
16320 Author: Andy Fleming <afleming@freescale.com>
16321 Date: Fri Feb 23 16:28:46 2007 -0600
16323 Only set ddrioovcr for 8548 rev1.
16325 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16326 Signed-off-by: Andy Fleming <afleming@freescale.com>
16328 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
16329 Author: Andy Fleming <afleming@freescale.com>
16330 Date: Sat Feb 24 01:16:45 2007 -0600
16332 Tweak DDR ECC error counter
16334 Enable single-bit error counter when memory was cleared by ddr controller.
16336 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16337 Signed-off-by: Andy Fleming <afleming@freescale.com>
16339 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
16340 Author: Timur Tabi <timur@freescale.com>
16341 Date: Mon Feb 12 13:34:55 2007 -0600
16343 85xx: write MAC address to mac-address and local-mac-address
16345 Some device trees have a mac-address property, some have local-mac-address,
16346 and some have both. To support all of these device trees, ftp_cpu_setup()
16347 should write the MAC address to mac-address and local-mac-address, if they
16350 Signed-off-by: Timur Tabi <timur@freescale.com>
16352 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
16353 Author: Andy Fleming <afleming@freescale.com>
16354 Date: Mon Apr 23 01:44:44 2007 -0500
16356 Some 85xx cpu cleanups
16358 * Cleaned up the TSR[WIS] clearing
16359 * Cleaned up DMA initialization
16361 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16362 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16363 Acked-by: Andy Fleming <afleming@freescale.com>
16365 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
16366 Author: Andy Fleming <afleming@freescale.com>
16367 Date: Mon Apr 23 01:32:22 2007 -0500
16369 Add cpu support for the 8544
16371 Recognize new SVR values, and add a few register definitions
16373 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16374 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16375 Acked-by: Andy Fleming <afleming@freescale.com>
16377 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
16378 Author: Jon Loeliger <jdl@freescale.com>
16379 Date: Wed Apr 11 16:51:02 2007 -0500
16381 Add MPC8544DS basic port board files.
16383 Add board port under new board/freescale directory
16384 structure and reuse existing PIXIS FPGA support there.
16386 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16387 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16389 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
16390 Author: Jon Loeliger <jdl@freescale.com>
16391 Date: Wed Apr 11 16:50:57 2007 -0500
16393 Add MPC8544DS main configuration file.
16395 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16396 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16398 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
16399 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
16400 Date: Wed Dec 27 22:07:15 2006 +0300
16402 Fix PCI I/O space mapping on Freescale MPC85x0ADS
16404 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
16405 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
16406 describing the local address window used for the PCI I/O space accesses -- fix
16407 this and carry over the necessary changes into the MPC8560ADS code since the
16408 PCI I/O space mapping was also broken for this board (by the earlier commit
16409 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
16410 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
16412 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
16414 board/mpc8540ads/init.S | 4 ++--
16415 board/mpc8560ads/init.S | 4 ++--
16416 include/configs/MPC8540ADS.h | 5 ++---
16417 include/configs/MPC8541CDS.h | 2 +-
16418 include/configs/MPC8548CDS.h | 2 +-
16419 include/configs/MPC8560ADS.h | 8 ++++----
16420 6 files changed, 12 insertions(+), 13 deletions(-)
16422 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
16423 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
16424 Date: Tue Dec 5 16:42:30 2006 +0800
16426 u-boot: Fix e500 v2 core reset bug
16428 The following patch fixes the e500 v2 core reset bug.
16429 For e500 v2 core, a new reset control register is added to reset the
16432 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16434 commit 63247a5acd58032e6cf33f525bc3923b467bac88
16435 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
16436 Date: Wed Dec 20 11:01:00 2006 +0800
16438 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
16440 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
16441 entry number to control the loop. This can reduce the potential risk
16442 for the 85xx processor increasing its TLB adn LAW entry number.
16444 Signed-off-by: Swarthout Edward <swarthout@freescale.com>
16445 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16447 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
16448 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
16449 Date: Mon Dec 18 17:01:04 2006 +0800
16451 u-boot: Fix the 85xxcds tsec bug
16453 Fix the 85xxcds tsec bug.
16454 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
16456 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16458 commit 7337b237ffc4aaf1b9467024fe472a880d852598
16459 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
16460 Date: Fri Dec 15 14:43:31 2006 +0800
16462 u-boot: Fix CPU2 errata on MPC8548CDS board
16464 This patch apply workaround of CPU2 errata on MPC8548CDS board.
16466 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
16468 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
16469 Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
16470 Date: Mon Dec 18 16:25:15 2006 +0800
16472 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
16474 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
16476 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
16478 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
16479 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
16480 Date: Thu Dec 14 14:14:55 2006 +0800
16482 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
16484 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
16486 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
16488 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
16489 Author: Scott Wood <scottwood@freescale.com>
16490 Date: Mon Apr 16 14:54:15 2007 -0500
16492 mpc83xx: Add MPC8313ERDB support.
16494 Signed-off-by: Scott Wood <scottwood@freescale.com>
16496 commit 49ea3b6eafe606285ae4d5c378026153dde53200
16497 Author: Scott Wood <scottwood@freescale.com>
16498 Date: Mon Apr 16 14:34:21 2007 -0500
16500 mpc83xx: Add generic PCI setup code.
16502 Board code can now request the generic setup code rather than having to
16503 copy-and-paste it for themselves. Boards should be converted to use this
16504 once they're tested with it.
16506 Signed-off-by: Scott Wood <scottwood@freescale.com>
16508 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
16509 Author: Scott Wood <scottwood@freescale.com>
16510 Date: Mon Apr 16 14:34:19 2007 -0500
16512 mpc83xx: Add 831x support to speed.c.
16514 Signed-off-by: Scott Wood <scottwood@freescale.com>
16516 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
16517 Author: Scott Wood <scottwood@freescale.com>
16518 Date: Mon Apr 16 14:34:18 2007 -0500
16520 mpc83xx: Add 831x support to global_data.h
16522 Signed-off-by: Scott Wood <scottwood@freescale.com>
16524 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
16525 Author: Scott Wood <scottwood@freescale.com>
16526 Date: Mon Apr 16 14:34:16 2007 -0500
16528 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
16530 Rather than misleadingly define PVR_83xx as the specific type of 83xx
16531 being built for, the PVR of each core revision is defined. checkcpu() now
16532 prints the core that it detects, rather than aborting if it doesn't find
16533 what it thinks it wants.
16535 Signed-off-by: Scott Wood <scottwood@freescale.com>
16537 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
16538 Author: Scott Wood <scottwood@freescale.com>
16539 Date: Mon Apr 16 14:34:15 2007 -0500
16541 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
16543 Signed-off-by: Scott Wood <scottwood@freescale.com>
16545 commit d87c57b201b4572d16f1b642998faa00c9912b16
16546 Author: Scott Wood <scottwood@freescale.com>
16547 Date: Mon Apr 16 14:31:55 2007 -0500
16549 mpc83xx: Add register definitions for MPC831x.
16551 Signed-off-by: Scott Wood <scottwood@freescale.com>
16553 commit 7fc4c71a143be8666d70803fb25ae60379c95622
16554 Author: Stefan Roese <sr@denx.de>
16555 Date: Mon Apr 23 15:39:59 2007 +0200
16559 Signed-off-by: Stefan Roese <sr@denx.de>
16561 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
16562 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
16563 Date: Mon Apr 23 15:30:39 2007 +0200
16565 [PATCH] Avoid assigning PCI resources from zero address
16567 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
16568 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
16569 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
16570 sentence about "0" being considered an invalid address) -- so, use a reasonable
16571 starting value of 0x1000 (that's what the most Linux archs are using).
16573 Alternatively, one might have fixed the calls to pci_set_region() individually
16574 (some code even seems to have taken care of this issue) but that would have
16575 been a lot more work. :-)
16577 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
16578 Acked-by: Stefan Roese <sr@denx.de>
16580 commit afb903a2eb9436baa9270ccc0c27082d86497d89
16581 Author: Jeffrey Mann <mannj@embeddedplanet.com>
16582 Date: Mon Apr 23 14:00:11 2007 +0200
16584 [patch] setenv(...) can delete environmentalvariables
16586 update setenv() function so that entering a NULL value for the
16587 variable's value will delete the environmental variable
16589 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
16590 Acked-by: Stefan Roese <sr@denx.de>
16592 commit 36f104e5caa747d568eff26b369565af57c2ffa6
16593 Author: Mike Frysinger <vapier@gentoo.org>
16594 Date: Mon Apr 23 13:54:24 2007 +0200
16596 [patch] use unsigned char in smc91111 driver for mac
16598 the v_mac variable in the smc91111 driver is declared as a signed char ...
16599 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
16600 because when it gets printed out, you get a display like:
16601 0xFFFFFFE0 and that's no good
16603 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
16605 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
16606 Author: Rodolfo Giometti <giometti@enneenne.com>
16607 Date: Mon Apr 23 13:10:52 2007 +0200
16609 USB: (Another) delay for crappy USB keys.
16611 Some USB keys are slow in giving back an answer when the Root HUB
16612 enables power lines.
16614 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
16616 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
16617 Author: Stefan Roese <sr@denx.de>
16618 Date: Mon Apr 23 12:00:22 2007 +0200
16620 Remove BOARDLIBS usage completely
16622 Signed-off-by: Stefan Roese <sr@denx.de>
16624 commit 32556443840f127170e4baa8bdd5b567039f6c36
16625 Author: Michal Simek <monstr@monstr.eu>
16626 Date: Sat Apr 21 21:07:22 2007 +0200
16628 [PATCH] SystemACE support for Microblaze
16630 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
16631 Author: Michal Simek <monstr@monstr.eu>
16632 Date: Sat Apr 21 21:02:40 2007 +0200
16634 16bit read/write little endian
16636 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
16637 Author: Michal Simek <monstr@monstr.eu>
16638 Date: Sat Apr 21 20:53:31 2007 +0200
16640 Change ML401 parameters - Xilinx BSP
16642 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
16643 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
16644 Date: Wed Feb 28 05:37:29 2007 -0600
16646 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
16648 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16650 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
16651 Author: Zhang Wei <wei.zhang@freescale.com>
16652 Date: Fri Jan 19 10:42:37 2007 +0800
16654 Enable LAWs for MPC8641 PCI-Ex2.
16656 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
16657 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16659 commit bd7851ce1e1f140665b520026abf1042968b1102
16660 Author: Jon Loeliger <jdl@freescale.com>
16661 Date: Fri Apr 20 14:12:26 2007 -0500
16663 mpc86xx; Write MAC address to mac-address and local-mac-address
16665 Some device trees have a mac-address property, some have local-mac-address,
16666 and some have both. To support all of these device trees, ftp_cpu_setup()
16667 should write the MAC address to mac-address and local-mac-address, if they
16670 Signed-off-by: Timur Tabi <timur@freescale.com>
16671 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16673 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
16674 Author: Jon Loeliger <jdl@freescale.com>
16675 Date: Fri Apr 20 14:11:38 2007 -0500
16677 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
16679 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16680 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16682 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
16683 Author: Wolfgang Denk <wd@denx.de>
16684 Date: Fri Apr 20 17:43:28 2007 +0200
16686 Cleanup compiler warnings, update CHANGELOG
16688 Signed-off-by: Wolfgang Denk <wd@denx.de>
16690 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
16691 Author: Detlev Zundel <dzu@denx.de>
16692 Date: Fri Apr 20 12:01:47 2007 +0200
16694 Fix breakage of NC650 board with respect to nand support.
16696 Signed-off-by: Detlev Zundel <dzu@denx.de>
16698 commit 39f23cd90947639ac278a18ff277ec786b5ac167
16699 Author: Domen Puncer <domen.puncer@telargo.com>
16700 Date: Fri Apr 20 11:13:16 2007 +0200
16702 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
16704 G2 core reference manual says decrementer and time base
16705 are decreasing/increasing once every 4 bus clock cycles.
16706 Lets fix it, so time in Linux won't run twice as fast
16708 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
16709 Acked-by: Grant Likely <grant.likely@secretlab.ca>
16711 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
16712 Author: Gerald Van Baren <vanbaren@cideas.com>
16713 Date: Thu Apr 19 23:14:39 2007 -0400
16715 Fix serious pointer bug with bootm and reserve map.
16717 What was suppose to be a stack variable was declared as a pointer,
16718 overwriting random memory.
16719 Also moved the libfdt.a requirement into the main Makefile. That is
16722 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
16723 Author: Stefan Roese <sr@denx.de>
16724 Date: Thu Apr 19 09:53:52 2007 +0200
16726 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
16728 Previous versions used full wait states for the chip select #1 which
16729 is connected to the Xilinix SystemACE controller on the AMCC Katmai
16730 evaluation board. This leads to really slow access and therefore low
16731 performance. This patch now sets up the chip select a lot faster
16732 resulting in much better read/write performance of the Linux driver.
16734 Signed-off-by: Stefan Roese <sr@denx.de>
16736 commit 37837828d89084879bee2f2b8c7c68d4695940df
16737 Author: Wolfgang Denk <wd@denx.de>
16738 Date: Wed Apr 18 17:49:29 2007 +0200
16740 Clenaup, update CHANGELOG
16742 Signed-off-by: Wolfgang Denk <wd@denx.de>
16744 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
16745 Author: Wolfgang Denk <wd@denx.de>
16746 Date: Wed Apr 18 17:20:58 2007 +0200
16750 Signed-off-by: Wolfgang Denk <wd@denx.de>
16752 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
16753 Author: Wolfgang Denk <wd@denx.de>
16754 Date: Wed Apr 18 17:07:26 2007 +0200
16756 Cleanup, update CHANGELOG
16758 Sigend-off-by: Wolfgang Denk <wd@denx.de>
16760 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
16761 Author: Wolfgang Denk <wd@denx.de>
16762 Date: Wed Apr 18 16:17:46 2007 +0200
16766 commit ad4eb555671d97f96dc56eab55103b1f86874b01
16767 Author: Wolfgang Denk <wd@denx.de>
16768 Date: Wed Apr 18 14:30:39 2007 +0200
16770 MCC200 board: remove warning which is obsolete after PSoC firmware changes
16772 Signed-off-by: Wolfgang Denk <wd@denx.de>
16774 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
16775 Author: Domen Puncer <domen.puncer@telargo.com>
16776 Date: Wed Apr 18 12:11:05 2007 +0200
16778 [PATCH] icecube/lite5200b: document wakeup from low-power support
16780 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
16782 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
16783 Author: Stefan Roese <sr@denx.de>
16784 Date: Wed Apr 18 12:07:47 2007 +0200
16786 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
16788 Signed-off-by: Stefan Roese <sr@denx.de>
16790 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
16791 Author: Stefan Roese <sr@denx.de>
16792 Date: Wed Apr 18 12:05:59 2007 +0200
16794 ppc4xx: Add output for bootrom location to 405EZ ports
16796 Now 405EZ ports also show upon bootup from which boot device
16797 they are configured to boot:
16799 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
16801 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
16802 Bootstrap Option E - Boot ROM Location EBC (32 bits)
16803 16 kB I-Cache 16 kB D-Cache
16804 Board: Acadia - AMCC PPC405EZ Evaluation Board
16806 Signed-off-by: Stefan Roese <sr@denx.de>
16808 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
16809 Author: Peter Pearse <peter.pearse@arm.com>
16810 Date: Tue Apr 17 13:30:33 2007 +0100
16812 Move ppearse to ARM board list
16813 Add Konstantin Kletschke for scb9328.
16814 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
16816 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
16817 Author: Domen Puncer <domen.puncer@telargo.com>
16818 Date: Mon Apr 16 14:00:13 2007 +0200
16820 [PATCH] icecube/lite5200b: wakeup from low-power support
16822 U-Boot part of Lite5200b low power mode support.
16823 Puts SDRAM out of self-refresh and transfers control to
16824 address saved at physical 0x0.
16826 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
16827 Acked-by: Grant Likely <grant.likely@secretlab.ca>
16829 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
16830 Author: Gerald Van Baren <vanbaren@cideas.com>
16831 Date: Sun Apr 15 13:54:26 2007 -0400
16833 Fix the ft_cpu_setup() property settings.
16835 Use "setter" functions instead of flags, cleaner and more flexible.
16836 It also fixes the problem noted by Timur Tabi that the ethernet MAC
16837 addresses were all being set incorrectly to the same MAC address.
16839 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
16840 Author: Gerald Van Baren <vanbaren@cideas.com>
16841 Date: Sat Apr 14 22:51:24 2007 -0400
16843 Improve the bootm command for CONFIG_OF_LIBFDT
16845 In bootm, create the "/chosen" node only if it doesn't already exist
16846 (better matches the previous behavior).
16847 Update for proper reserved memory map handling for initrd.
16849 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
16850 Author: Gerald Van Baren <vanbaren@cideas.com>
16851 Date: Sat Apr 14 22:46:41 2007 -0400
16853 Add some utilities to manipulate the reserved memory map.
16855 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
16856 Author: Wolfgang Denk <wd@denx.de>
16857 Date: Sat Apr 14 21:16:54 2007 +0200
16861 commit 8e6875183cdca91c134408d119d4abcd48ef6856
16862 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16863 Date: Sun Dec 17 18:56:46 2006 +0100
16865 AVR32: Enable MMC support
16867 Set up the portmux for the MMC interface and enable the MMC driver
16868 along with support for DOS partitions, ext2 and FAT filesystems.
16870 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16872 commit fc26c97bb6df41b4a95662c34054fe912387bf38
16873 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16874 Date: Fri Jan 20 10:03:53 2006 +0100
16878 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
16880 The AT91 ARM-based CPUs use basically the same hardware, so it should
16881 be possible to share this driver, but no effort has been made so far.
16883 Hardware documentation can be found in the AT32AP7000 data sheet,
16884 which can be downloaded from
16886 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
16888 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16890 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
16891 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16892 Date: Sun Dec 17 18:55:37 2006 +0100
16894 AVR32: Add clk and gpio infrastructure for mmci
16896 Implement functions for configuring the mmci pins, as well as
16897 functions for getting the clock rate of the mmci controller.
16899 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16901 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
16902 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16903 Date: Sun Dec 17 18:53:56 2006 +0100
16905 Enable partition support with MMC
16907 Include implementations of init_part() and get_partition_info() when
16910 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16912 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
16913 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16914 Date: Sun Dec 17 17:14:30 2006 +0100
16916 AVR32: Enable networking
16918 Implement MACB initialization for AVR32 and ATSTK1000, and turn
16919 everything on, including the MACB driver.
16921 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16923 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
16924 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16925 Date: Fri Jan 20 10:03:34 2006 +0100
16927 Atmel MACB ethernet driver
16929 Driver for the Atmel MACB on-chip ethernet controller.
16931 This driver has been tested on the ATSTK1000 board with a AT32AP7000
16932 CPU. It should probably work on AT91SAM926x as well with some minor
16935 Hardware documentation can be found in the AT32AP7000 data sheet,
16936 which can be downloaded from
16938 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
16940 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16942 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
16943 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16944 Date: Sun Dec 17 16:56:14 2006 +0100
16946 AVR32: Add clk and gpio infrastructure for macb0 and macb1
16948 Implement functions for configuring the macb0 and macb1 pins, as
16949 well as functions for getting the clock rate of the various
16950 busses the macb ethernet controllers are connected to.
16952 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16954 commit d5acb95b16a0a74c643524342c3437e765426d05
16955 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16956 Date: Sun Dec 17 15:39:15 2006 +0100
16958 AVR32: Implement simple DMA memory allocator
16960 Implement dma_alloc_coherent() which returns cache-aligned
16961 uncacheable memory.
16963 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16965 commit 91975b0fea773c9e681fea8cf3349669f27685ee
16966 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16967 Date: Sun Dec 17 15:46:02 2006 +0100
16969 Import <linux/mii.h> from the Linux kernel
16971 Instead of creating yet another set of MII register definitions
16972 in the macb driver, here's a complete set of definitions for everyone
16975 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16977 commit 1b804b229556a4d862da93c0ec94e79419364b2c
16978 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16979 Date: Wed Mar 21 19:47:36 2007 +0100
16981 AVR32: Include more commands for ATSTK1000
16983 Include the imi, imls and jffs commands sets by default on ATSTK1000.
16984 Also define CONFIG_BOOTARGS to something more useful, define
16985 CONFIG_BOOTCOMMAND and enable autoboot by default.
16987 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16989 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
16990 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16991 Date: Wed Mar 21 19:44:48 2007 +0100
16993 AVR32: Provide a definition of struct stat
16995 Copy the definition of struct stat from the Linux kernel.
16997 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16999 commit 12f099c08167a7a51aeee623bc16dafd0841271c
17000 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17001 Date: Sun Dec 17 14:46:06 2006 +0100
17003 AVR32: Use initdram() instead of board_init_memories()
17005 Conform to the "standard" interface and use initdram() instead of
17006 board_init_memories() on AVR32. This enables us to get rid of the
17007 sdram_size member of the global_data struct as well.
17009 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17011 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
17012 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17013 Date: Mon Nov 20 15:53:10 2006 +0100
17015 AVR32: Relocate u-boot to SDRAM
17017 Relocate the u-boot image into SDRAM like everyone else does. This
17018 means that we can handle much larger .data and .bss than we used to.
17020 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17022 commit df548d3c3e2bbc40258713167859ffc2ce99a900
17023 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17024 Date: Sun Nov 19 18:06:53 2006 +0100
17026 AVR32: Resource management rewrite
17028 Rewrite the resource management code (i.e. I/O memory, clock gating,
17029 gpio) so it doesn't depend on any global state. This is necessary
17030 because this code is heavily used before relocation to RAM, so we
17031 can't write to any global variables.
17033 As an added bonus, this makes u-boot's memory footprint a bit smaller,
17034 although some functionality has been left out; all clocks are enabled
17035 all the time, and there's no checking for gpio line conflicts.
17037 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17039 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
17040 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17041 Date: Sat Nov 18 18:01:13 2006 +0100
17043 AVR32: Clean up memory-map.h for at32ap7000
17045 Convert spaces to tabs (must have missed this one last time around),
17046 sort the entries by address and group them together by bus
17049 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17051 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
17052 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17053 Date: Sat Nov 18 17:32:31 2006 +0100
17055 AVR32: Build position-independent u-boot
17057 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
17058 position independent. This will make relocation a lot easier.
17060 -mno-init-got means that gcc shouldn't emit code to load the GOT
17061 address into r6 in every function prologue. We do it once and for
17062 all in the early startup assembly code, so enabling this option
17063 makes u-boot a bit faster and smaller.
17065 The assembly parts have always been position-independent, so no code
17066 changes should be necessary.
17068 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17070 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
17071 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17072 Date: Sat Nov 18 17:24:31 2006 +0100
17074 AVR32: Use avr32-linux- cross-compilation prefix by default
17076 It doesn't really matter which toolchain you use to compile u-boot,
17077 but the avr32-linux one is probably what most people have installed.
17079 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17081 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
17082 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17083 Date: Sat Nov 18 17:15:30 2006 +0100
17085 AVR32: Split start_u_boot into board_init_f and board_init_r
17087 Split the avr32 initialization code into a function to run before
17088 relocation, board_init_f and a function to run after relocation,
17089 board_init_r. For now, board_init_f simply calls board_init_r
17092 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17094 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
17095 Author: Heiko Schocher <hs@pollux.denx.de>
17096 Date: Sat Apr 14 05:26:48 2007 +0200
17098 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
17099 clear the Display after reset.
17101 Signed-off-by: Heiko Schocher <hs@denx.de>
17103 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
17104 Author: Denis Peter <d.peter@mpl.ch>
17105 Date: Fri Apr 13 09:13:33 2007 +0200
17107 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
17109 Fix bug introduced by "Fix get_partition_info() parameter error in all
17110 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
17111 to use diskboot or scsiboot form another device than 0.
17113 Signed-off-by: Denis Peter <d.peter@mpl.ch>
17115 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
17116 Author: Greg Lopp <lopp@pobox.com>
17117 Date: Fri Apr 13 08:02:24 2007 +0200
17119 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
17121 Signed-of-by: Greg Lopp <lopp@pobox.com>
17122 Acked-by: Grant Likely <grant.likely@secretlab.ca>
17124 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
17125 Author: Xie Xiaobo <r63061@freescale.com>
17126 Date: Fri Mar 9 19:08:25 2007 +0800
17128 Fix two bugs for MPC83xx DDR2 controller SPD Init
17130 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
17131 the first bug is that the picos_to_clk routine introduces a huge
17132 rounding error in 83xx.
17133 the second bug is that the mode register write recovery field is
17134 tWR-1, not tWR >> 1.
17136 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
17137 Author: Jeffrey Mann <mannj@embeddedplanet.com>
17138 Date: Thu Apr 12 14:15:59 2007 +0200
17140 ppc4xx: Fix i2c divisor calcularion for PPC4xx
17142 This patch fixes changes the i2c_init(...) function to use the function
17143 get_OPB_freq() rather than calculating the OPB speed by
17144 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
17145 specific per processor. The prior method was not and so was calculating
17146 the wrong speed for some PPC4xx processors.
17148 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
17149 Signed-off-by: Stefan Roese <sr@denx.de>
17151 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
17152 Author: Wolfgang Denk <wd@denx.de>
17153 Date: Wed Apr 11 17:25:01 2007 +0200
17157 Signed-off-by: Wolfgang Denk <wd@denx.de>
17159 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
17160 Author: Wolfgang Denk <wd@denx.de>
17161 Date: Wed Apr 11 17:22:55 2007 +0200
17163 Update for SC3 board
17165 * Make IDE timeout configurable through ide_reset_timeout variable.
17166 * Use Newline as "password" string
17167 * Use just a single partition in NAND flash
17169 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
17170 Author: Haiying Wang <haiying.wang@freescale.com>
17171 Date: Mon Jan 22 12:37:30 2007 -0600
17173 Add PIXIS FPGA support for MPC8641HPCN board.
17175 Move the 8641HPCN's PIXIS code to the new directory
17176 board/freescale/common/ as it will be shared by
17177 future boards not in the same processor family.
17179 Write a "pixis_reset" command that utilizes the FPGA
17180 reset sequencer to support alternate soft-reset options
17181 such as using the "alternate" flash bank, enabling
17182 the watch dog, or choosing different CPU frequencies.
17184 Add documentation for the pixis_reset to README.mpc8641hpcn.
17186 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
17187 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17189 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
17190 Author: Gerald Van Baren <vanbaren@cideas.com>
17191 Date: Fri Apr 6 14:19:43 2007 -0400
17193 Moved fdt command support code to fdt_support.c
17195 ...in preparation for improving the bootm command's handling of fdt blobs.
17196 Also cleaned up some coding sloppiness.
17198 commit 6679f9299534e488a171a9bb8f9bb891de247aab
17199 Author: Gerald Van Baren <vanbaren@cideas.com>
17200 Date: Fri Apr 6 14:17:14 2007 -0400
17202 libfdt: Make fdt_check_header() public
17204 Changed _fdt_check_header() to fdt_check_header() and made it part of
17205 the interface - it is a useful routine.
17207 Also did some asthetics cleanup to the include files (headers).
17209 commit c0707ce65677650b5ceab0500ee50ae5168afef2
17210 Author: Aubrey Li <aubrey.adi@gmail.com>
17211 Date: Thu Apr 5 18:34:06 2007 +0800
17213 [Blackfin][PATCH] Kill off a bunch of common local prototypes
17215 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
17216 Author: Aubrey Li <aubrey.adi@gmail.com>
17217 Date: Thu Apr 5 18:33:04 2007 +0800
17219 [Blackfin][PATCH] Fix dynamic CPLB generation issue
17221 commit 0445e3a264251d75b1be45ef713c70726a2952f0
17222 Author: Aubrey Li <aubrey.adi@gmail.com>
17223 Date: Thu Apr 5 18:31:47 2007 +0800
17225 [Blackfin][PATCH] minior cleanup
17227 commit 155fd766573981090e638b493d5857562151862e
17228 Author: Aubrey Li <aubrey.adi@gmail.com>
17229 Date: Thu Apr 5 18:31:18 2007 +0800
17231 [Blackfin][PATCH] Fix copyright and update license
17233 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
17234 Author: Aubrey Li <aubrey.adi@gmail.com>
17235 Date: Thu Apr 5 18:30:25 2007 +0800
17237 [Blackfin][PATCH] Add BF537 EMAC driver initialization
17239 commit 889256e8604e0c68db1d866d720894dffede9df6
17240 Author: Aubrey Li <aubrey.adi@gmail.com>
17241 Date: Thu Apr 5 18:29:55 2007 +0800
17243 [Blackfin][PATCH] call real the system synchronize instruction
17245 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
17246 Author: Aubrey Li <aubrey.adi@gmail.com>
17247 Date: Thu Apr 5 18:29:17 2007 +0800
17249 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
17251 commit dfeeab2cd680df047e68e723b246adf6f33bb556
17252 Author: Aubrey Li <aubrey.adi@gmail.com>
17253 Date: Thu Apr 5 18:28:34 2007 +0800
17255 [Blackfin][PATCH]: fix flash unaligned copy issue
17257 commit 443feb740584e406efa203af909fe2926608e8d5
17258 Author: Igor Marnat <marny@rambler.ru>
17259 Date: Wed Mar 21 09:55:01 2007 +0300
17261 Update usage of 'nc' in README.NetConsole
17263 Added information about usage of NetConsole on systems where the -l and -p
17264 switches are mutually exclusive.
17266 Signed-off-by: Igor Marnat <marny@rambler.ru>
17267 Signed-off-by: Ben Warren <bwarren@qstreams.com>
17269 commit 31c98a88228021b314c89ebb8104fb6473da4471
17270 Author: Wolfgang Denk <wd@denx.de>
17271 Date: Wed Apr 4 02:09:30 2007 +0200
17273 Minor coding style cleanup.
17275 commit 94abd7c0583ebe01e799b25f451201deeaab550d
17276 Author: Wolfgang Denk <wd@denx.de>
17277 Date: Wed Apr 4 01:49:15 2007 +0200
17281 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
17282 Author: Rodolfo Giometti <giometti@enneenne.com>
17283 Date: Tue Apr 3 14:27:18 2007 +0200
17285 Support for the Philips ISP116x HCD (Host Controller Driver)
17287 Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
17289 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
17290 Author: Markus Klotzbuecher <mk@denx.de>
17291 Date: Tue Apr 3 14:27:08 2007 +0200
17293 USB: cleanup monahans usb support. Remove dead code.
17295 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
17297 commit a65c5768e5537530bd1780af3d3fddc3113a163c
17298 Author: Stefan Roese <sr@denx.de>
17299 Date: Mon Apr 2 10:09:30 2007 +0200
17301 ppc4xx: Change SysACE address on Katmai
17303 With this new base address of the Xilinx SystemACE controller
17304 the Linux driver will be easier to adapt, since it can now be
17305 mapped via the "normal" ioremap() call.
17307 Signed-off-by: Stefan Roese <sr@denx.de>
17309 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
17310 Author: Gerald Van Baren <vanbaren@cideas.com>
17311 Date: Sat Mar 31 14:30:53 2007 -0400
17313 Fix some minor whitespace violations.
17315 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
17316 Author: Gerald Van Baren <vanbaren@cideas.com>
17317 Date: Sat Mar 31 12:23:51 2007 -0400
17319 Add a flattened device tree (fdt) command (2 of 2)
17321 Modifications to the existing code to support the new fdt command.
17323 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
17324 Author: Gerald Van Baren <vanbaren@cideas.com>
17325 Date: Sat Mar 31 12:22:10 2007 -0400
17327 Add a flattened device tree (fdt) command (1 of 2)
17329 The fdt command uses David Gibson's libfdt library to manipulate as well
17330 as print the flattened device tree. This patch is the new command,
17331 the second part is the modifications to the existing code.
17333 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
17334 Author: Gerald Van Baren <vanbaren@cideas.com>
17335 Date: Sat Mar 31 12:13:43 2007 -0400
17337 libfdt: Enhanced and published fdt_next_tag()
17339 Enhanced the formerly private function _fdt_next_tag() to allow stepping
17340 through the tree, used to produce a human-readable dump, and made
17341 it part of the published interface.
17342 Also added some comments.
17344 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
17345 Author: Gerald Van Baren <vanbaren@cideas.com>
17346 Date: Sat Mar 31 12:05:39 2007 -0400
17348 libfdt: Customizations for use by u-boot.
17350 Changes to David Gibson's original source to fit into u-boot's
17351 environment. No functionality changes.
17353 commit 35748177c64a4a83a00057e93bb33e40278a2a96
17354 Author: Gerald Van Baren <vanbaren@cideas.com>
17355 Date: Sat Mar 31 12:00:56 2007 -0400
17357 libfdt: Import libfdt source (2 of 2)
17359 This adds the applicable libfdt source files (unmodified) and a README
17360 to explain where the source came from.
17362 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
17363 Author: Gerald Van Baren <vanbaren@cideas.com>
17364 Date: Sat Mar 31 11:59:59 2007 -0400
17366 libfdt: Import libfdt source (1 of 2)
17368 This adds the applicable libfdt source files (unmodified) and a README
17369 to explain where the source came from.
17371 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
17372 Author: Stefan Roese <sr@denx.de>
17373 Date: Sat Mar 31 13:16:23 2007 +0200
17375 ppc4xx: Update Katmai bootstrap command
17377 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
17380 Signed-off-by: Stefan Roese <sr@denx.de>
17382 commit cabee756a6532986729477c3cc1ea16ef8517ad2
17383 Author: Stefan Roese <sr@denx.de>
17384 Date: Sat Mar 31 13:15:06 2007 +0200
17386 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
17388 Additional RAM information is now printed upon powerup, like
17389 DDR2 frequency and CAS latency.
17391 Signed-off-by: Stefan Roese <sr@denx.de>
17393 commit 60723803431ac75cad085690789e433d5ab9174e
17394 Author: Stefan Roese <sr@denx.de>
17395 Date: Sat Mar 31 08:48:36 2007 +0200
17397 ppc4xx: Change Yucca config file to support ECC
17399 With the updated 44x DDR2 driver the Yucca board now supports
17400 ECC generation and checking.
17402 Signed-off-by: Stefan Roese <sr@denx.de>
17404 commit 490e5730c674b20d708b783a2c5ffd7208f83873
17405 Author: Stefan Roese <sr@denx.de>
17406 Date: Sat Mar 31 08:47:34 2007 +0200
17408 ppc4xx: Fix "bootstrap" command for Katmai board
17410 The board specific "bootstrap" command is now fixed and can
17411 be used for the AMCC Katmai board to configure different
17412 CPU/PLB/OPB frequencies.
17414 Signed-off-by: Stefan Roese <sr@denx.de>
17416 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
17417 Author: Stefan Roese <sr@denx.de>
17418 Date: Sat Mar 31 08:46:08 2007 +0200
17420 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
17422 Fix a bug in the auto calibration routine. This driver now runs
17423 more reliable with the tested modules. It's also tested with
17424 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
17426 Signed-off-by: Stefan Roese <sr@denx.de>
17428 commit 342cd097be1e7affe82f42ab3da220959a699e64
17429 Author: Michal Simek <monstr@monstr.eu>
17430 Date: Fri Mar 30 22:52:09 2007 +0200
17432 [PATCH] Clean include dependence
17434 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
17435 Author: Michal Simek <monstr@monstr.eu>
17436 Date: Fri Mar 30 22:42:45 2007 +0200
17438 [CLEAN] Remove inefficient Suzaku code
17440 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
17441 Author: Stefan Roese <sr@denx.de>
17442 Date: Wed Mar 28 15:03:16 2007 +0200
17444 Merge some AMCC make targets to keep the top-level Makefile smaller
17446 Signed-off-by: Stefan Roese <sr@denx.de>
17448 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
17449 Author: Stefan Roese <sr@denx.de>
17450 Date: Wed Mar 28 14:52:12 2007 +0200
17452 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
17454 The "old" i2c commands (iprobe, imd...) are now compiled in again,
17455 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
17458 Signed-off-by: Stefan Roese <sr@denx.de>
17460 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
17461 Author: Michal Simek <monstr@monstr.eu>
17462 Date: Tue Mar 27 00:32:16 2007 +0200
17464 PATCH: Resolve GPL license problem
17466 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
17467 Author: Rodolfo Giometti <giometti@enneenne.com>
17468 Date: Mon Mar 26 12:03:36 2007 +0200
17470 PXA: pxa27x USB OHCI support
17472 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
17474 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
17475 Author: Markus Klotzbuecher <mk@denx.de>
17476 Date: Mon Mar 26 11:21:05 2007 +0200
17478 USB: remove the S3C24X0_merge #define, which was introduced while
17479 merging OHCI drivers.
17481 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
17483 commit 1798049522f594013aea29457d46794298c6ae15
17484 Author: Michal Simek <root@monstr.eu>
17485 Date: Mon Mar 26 01:39:07 2007 +0200
17487 Support for XUPV2P board
17489 BSP autoconfig support
17491 commit 0d974d5297349504a2ddfa09314be573b5df320a
17492 Author: Stefan Roese <sr@denx.de>
17493 Date: Sat Mar 24 15:57:09 2007 +0100
17495 [PATCH] Add 4xx GPIO functions
17497 This patch adds some 4xx GPIO functions. It also moves some of the
17498 common code and defines into a common 4xx GPIO header file.
17500 Signed-off-by: Stefan Roese <sr@denx.de>
17502 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
17503 Author: Stefan Roese <sr@denx.de>
17504 Date: Sat Mar 24 15:55:58 2007 +0100
17506 [PATCH] Small Sequoia cleanup
17508 Signed-off-by: Stefan Roese <sr@denx.de>
17510 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
17511 Author: Stefan Roese <sr@denx.de>
17512 Date: Sat Mar 24 15:45:34 2007 +0100
17514 [PATCH] Clean up 40EZ/Acadia support
17516 This patch cleans up all the open issue of the preliminary
17519 Signed-off-by: Stefan Roese <sr@denx.de>
17521 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
17522 Author: Jon Loeliger <jdl@freescale.com>
17523 Date: Tue Dec 12 11:02:20 2006 -0600
17525 Fix 8641HPCN problem with ld version 2.16
17527 (Dot outside sections problem).
17529 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
17531 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17533 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
17534 Author: Haiying Wang <haiying.wang@freescale.com>
17535 Date: Thu Dec 7 10:35:55 2006 -0600
17537 Set Rev 2.x 86xx PIC in mixed mode.
17539 Prevent false interrupt from hanging Linux as MSR[EE] is set
17540 to enable interrupts by changing the PIC out of the default
17541 pass through mode into mixed mode.
17543 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
17544 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17546 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
17547 Author: Jason Jin <jason.jin@freescale.com>
17548 Date: Thu Dec 7 10:32:35 2006 -0600
17550 Add flash cmd function to 8641HPCN ramboot
17552 Also fixes some commmand for 8641 HPCN ramboot case.
17554 Signed-off-by: Jason Jin <jason.jin@freescale.com>
17555 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17557 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
17558 Author: Ed Swarthout <ed.swarthout@freescale.com>
17559 Date: Thu Dec 7 10:34:14 2006 -0600
17561 Add support for 8641 Rev 2 silicon.
17563 Without this patch, I am unable to get to the prompt on rev 2 silicon.
17564 Only set ddrioovcr for rev1.
17566 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
17567 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17569 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
17570 Author: Wolfgang Denk <wd@denx.de>
17571 Date: Thu Mar 22 00:13:12 2007 +0100
17573 Code cleanup / re-insert previous Copyright entries.
17575 Signed-off-by: Wolfgang Denk <wd@denx.de>
17577 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
17578 Author: Wolfgang Denk <wd@denx.de>
17579 Date: Wed Mar 21 23:26:15 2007 +0100
17581 Code cleanup. Update CHANGELOG
17583 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
17584 Author: Stefan Roese <sr@denx.de>
17585 Date: Wed Mar 21 14:54:29 2007 +0100
17587 ppc4xx: Fix file mode of include/configs/acadia.h
17589 Signed-off-by: Stefan Roese <sr@denx.de>
17591 commit d5f4614c9350d9333e575100fb250aab774d0258
17592 Author: Markus Klotzbuecher <mk@denx.de>
17593 Date: Wed Mar 21 14:41:46 2007 +0100
17595 SPC1920: fix small clock routing bug
17597 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
17599 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
17600 Author: Stefan Roese <sr@denx.de>
17601 Date: Wed Mar 21 13:39:57 2007 +0100
17603 [PATCH] Add AMCC Acadia (405EZ) eval board support
17605 This patch adds support for the new AMCC Acadia eval board.
17607 Please note that this Acadia/405EZ support is still in a beta stage.
17608 Still lot's of cleanup needed but we need a preliminary release now.
17610 Signed-off-by: Stefan Roese <sr@denx.de>
17612 commit e01bd218b00af73499331a1a701625a852cd286f
17613 Author: Stefan Roese <sr@denx.de>
17614 Date: Wed Mar 21 13:38:59 2007 +0100
17616 [PATCH] Add AMCC PPC405EZ support
17618 This patch adds support for the new AMCC 405EZ PPC. It is in
17619 preparation for the AMCC Acadia board support.
17621 Please note that this Acadia/405EZ support is still in a beta stage.
17622 Still lot's of cleanup needed but we need a preliminary release now.
17624 Signed-off-by: Stefan Roese <sr@denx.de>
17626 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
17627 Author: Heiko Schocher <hs@pollux.denx.de>
17628 Date: Wed Mar 21 08:45:17 2007 +0100
17630 [PATCH] TQM8272: dont change the bits given from the HRCW
17631 for the SIUMCR and BCR Register.
17632 Fix the calculation for the EEprom Size
17634 Signed-off-by: Heiko Schocher <hs@denx.de>
17636 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
17637 Author: Aubrey Li <aubrey.adi@gmail.com>
17638 Date: Tue Mar 20 18:16:24 2007 +0800
17640 [Blackfin][PATCH] Add BF561 EZKIT board support
17642 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
17643 Author: Aubrey Li <aubrey.adi@gmail.com>
17644 Date: Mon Mar 19 22:55:58 2007 +0800
17646 [Blackfin][PATCH] minor cleanup
17648 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
17649 Author: Wolfgang Denk <wd@denx.de>
17650 Date: Mon Mar 19 13:10:08 2007 +0100
17652 Remove obsoleted POST files.
17654 Signed-off-by: Wolfgang Denk <wd@denx.de>
17656 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
17657 Author: Aubrey Li <aubrey.adi@gmail.com>
17658 Date: Mon Mar 19 01:26:11 2007 +0800
17660 [PATCH] Add flash chip M29W320ET/B support
17662 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
17663 Author: Aubrey Li <aubrey.adi@gmail.com>
17664 Date: Mon Mar 19 01:24:52 2007 +0800
17666 [Blackfin][PATCH] Add BF537 stamp board support
17668 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
17669 Author: Stefan Roese <sr@denx.de>
17670 Date: Fri Mar 16 21:11:42 2007 +0100
17672 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
17674 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
17675 DDR memory are dynamically programmed matching the total size
17676 of the equipped memory (DIMM modules).
17678 Signed-off-by: Stefan Roese <sr@denx.de>
17680 commit 76d1466f918b881cda2d259254761e73885093c2
17681 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17682 Date: Tue Mar 13 13:38:05 2007 +0100
17684 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
17685 boards in terms of unification.
17687 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17689 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
17690 Author: Wolfgang Denk <wd@denx.de>
17691 Date: Tue Mar 13 16:05:55 2007 +0100
17693 Make SC3 board build with 'make O='; use 'addcons' consistently
17694 (SC3 and Jupiter used to use 'addcon' instead).
17696 Signed-off-by: Wolfgang Denk wd@denx.de
17698 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
17699 Author: Heiko Schocher <hs@pollux.denx.de>
17700 Date: Tue Mar 13 09:40:59 2007 +0100
17702 [PATCH] update board config for jupiter Board:
17704 CONFIG_CMDLINE_EDITING,
17705 CFG_ENV_ADDR_REDUND activated
17707 Signed-off-by: Heiko Schocher <hs@denx.de>
17709 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
17710 Author: Aubrey Li <aubrey.adi@gmail.com>
17711 Date: Mon Mar 12 12:11:55 2007 +0800
17713 [Blackfin][PATCH] minor cleanup
17715 commit bfa5754a58477ac917d21527cd0f079d87cf188e
17716 Author: Aubrey Li <aubrey.adi@gmail.com>
17717 Date: Mon Mar 12 01:42:06 2007 +0800
17719 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
17721 commit 8440bb14581a294375c34b91b42512f9753d1130
17722 Author: Aubrey Li <aubrey.adi@gmail.com>
17723 Date: Mon Mar 12 00:25:14 2007 +0800
17725 [Blackfin][PATCH] code cleanup
17727 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
17728 Author: Michal Simek <monstr@monstr.eu>
17729 Date: Sun Mar 11 13:48:24 2007 +0100
17731 [Microblaze][PATCH] part 2
17733 interrupt controller support
17737 board information support
17739 booting image support
17741 adding support for Xilinx ML401
17743 commit 76316a318de91f6184e7c22a10e02d275ade2441
17744 Author: Michal Simek <monstr@monstr.eu>
17745 Date: Sun Mar 11 13:42:58 2007 +0100
17747 [Microblaze][PATCH]
17749 interrupt controller support
17753 board information support
17755 booting image support
17757 adding support for Xilinx ML401
17759 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
17760 Author: Aubrey Li <aubrey.adi@gmail.com>
17761 Date: Sat Mar 10 23:49:29 2007 +0800
17763 [Blackfin][PATCH] code cleanup
17765 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
17766 Author: Aubrey.Li <aubrey.adi@gmail.com>
17767 Date: Fri Mar 9 13:40:56 2007 +0800
17769 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
17771 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
17772 Author: Aubrey.Li <aubrey.adi@gmail.com>
17773 Date: Fri Mar 9 13:38:44 2007 +0800
17775 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
17777 commit 992423ab43c2bcf6b704853bd00af77450915e20
17778 Author: Stefan Roese <sr@denx.de>
17779 Date: Thu Mar 8 23:00:08 2007 +0100
17781 ppc4xx: Fix file mode of sequoia.c
17783 Signed-off-by: Stefan Roese <sr@denx.de>
17785 commit eb92f613556800f7483666db09d9a237ad911d4a
17786 Author: Wolfgang Denk <wd@pollux.denx.de>
17787 Date: Thu Mar 8 22:52:51 2007 +0100
17791 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
17792 Author: John Otken john@softadvances.com <john@softadvances.com>
17793 Date: Thu Mar 8 09:39:48 2007 -0600
17795 ppc4xx: Clear Sequoia/Rainier security engine reset bits
17797 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
17799 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
17800 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17801 Date: Thu Mar 8 16:26:52 2007 +0100
17803 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
17805 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17807 commit d9fc703246840c4b268debf48c334ba55c597dc0
17808 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17809 Date: Thu Mar 8 16:25:47 2007 +0100
17811 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
17813 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17815 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
17816 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17817 Date: Thu Mar 8 16:23:11 2007 +0100
17819 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
17821 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17823 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
17824 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17825 Date: Thu Mar 8 16:20:32 2007 +0100
17827 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
17829 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17831 commit f9fc6a5852a6335840882fa2111925010eea1abe
17832 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17833 Date: Wed Mar 7 15:32:01 2007 +0100
17835 fixed ethernet phy configuration for plu405 board
17837 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17839 commit 769104c9356594deb2092e204a39c05b33202d6c
17840 Author: Wolfgang Denk <wd@pollux.denx.de>
17841 Date: Thu Mar 8 21:49:27 2007 +0100
17845 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
17846 Author: Stefan Roese <sr@denx.de>
17847 Date: Thu Mar 8 10:13:16 2007 +0100
17849 [PATCH] Update AMCC Luan 440SP eval board support
17851 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
17852 inititializition. This includes DDR auto calibration and support
17853 for different DIMM modules, instead of the fixed setup used in
17854 the earlier version.
17856 This patch also enables the cache in FLASH for the startup
17857 phase of U-Boot (while running from FLASH). After relocating to
17858 SDRAM the cache is disabled again. This will speed up the boot
17859 process, especially the SDRAM setup, since there are some loops
17860 for memory testing (auto calibration).
17862 Signed-off-by: Stefan Roese <sr@denx.de>
17864 commit 2f5df47351910a2936c7741cf111855829200943
17865 Author: Stefan Roese <sr@denx.de>
17866 Date: Thu Mar 8 10:10:18 2007 +0100
17868 [PATCH] Update AMCC Yucca 440SPe eval board support
17870 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
17871 inititializition. This includes DDR auto calibration and support
17872 for different DIMM modules, instead of the fixed setup used in
17873 the earlier version.
17875 Signed-off-by: Stefan Roese <sr@denx.de>
17877 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
17878 Author: Stefan Roese <sr@denx.de>
17879 Date: Thu Mar 8 10:07:18 2007 +0100
17881 ppc4xx: Small AMCC Katmai 440SPe update
17883 Signed-off-by: Stefan Roese <sr@denx.de>
17885 commit df294497479b1dca6dd86318b2a912f72fede0df
17886 Author: Stefan Roese <sr@denx.de>
17887 Date: Thu Mar 8 10:06:09 2007 +0100
17889 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
17891 Signed-off-by: Stefan Roese <sr@denx.de>
17893 commit 83853178bd36bca6f0f8f1331476620c84a587fc
17894 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
17895 Date: Wed Mar 7 12:14:50 2007 -0600
17897 net - Support ping reply when processing net-loop
17899 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
17901 This permits the ping command to test the phy interface when the phy
17902 is put in loopback mode (typically by setting register 0 bit 14).
17904 It also allows the port to respond to an external ping when u-boot is
17905 processing some other net command (such as tftp). This is useful when
17906 tftp appears to hang.
17908 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17909 Signed-off-by: Ben Warren <bwarren@qstreams.com>
17911 commit fa1aef15bcd47736687be1af544506e90fba545d
17912 Author: Stefan Roese <sr@denx.de>
17913 Date: Wed Mar 7 16:43:00 2007 +0100
17915 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
17917 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
17918 DDR memory are dynamically programmed matching the total size
17919 of the equipped memory (DIMM modules).
17921 Signed-off-by: Stefan Roese <sr@denx.de>
17923 commit e2ebe696818939e2b974628be9c921ea3fe9de13
17924 Author: Stefan Roese <sr@denx.de>
17925 Date: Wed Mar 7 16:39:36 2007 +0100
17927 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
17929 This patch fixes a problem that occurs when 2 DIMM's are
17930 used. This problem was first spotted and fixed by Gerald Jackson
17931 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
17932 problem in a little more clever way.
17934 This patch also adds the nice functionality to dynamically
17935 create the TLB entries for the SDRAM (tlb.c). So we should
17936 never run into such problems with wrong (too short) TLB
17937 initialization again on these platforms.
17939 As this feature is new to the "old" 44x SPD DDR driver, it
17940 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
17942 Signed-off-by: Stefan Roese <sr@denx.de>
17944 commit 39218433983417b9df087976a79e3f80dd5e83d6
17945 Author: Wolfgang Denk <wd@denx.de>
17946 Date: Wed Mar 7 16:33:44 2007 +0100
17948 UC101: fix compiler warnings
17950 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
17951 Author: Wolfgang Denk <wd@pollux.denx.de>
17952 Date: Wed Mar 7 16:19:46 2007 +0100
17954 HMI1001: fix build error, cleanup compiler warnings.
17956 commit ad5bb451ade552c44bef9119d907929ebc2c126f
17957 Author: Wolfgang Denk <wd@pollux.denx.de>
17958 Date: Tue Mar 6 18:08:43 2007 +0100
17960 Restructure POST directory to support of other CPUs, boards, etc.
17962 commit a5284efd125967675b2e9c6ef7b95832268ad360
17963 Author: Wolfgang Denk <wd@pollux.denx.de>
17964 Date: Tue Mar 6 18:01:47 2007 +0100
17966 Fix HOSTARCH handling.
17967 Patch by Mike Frysinger, Mar 05 2007
17969 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
17970 Author: Stefan Roese <sr@denx.de>
17971 Date: Tue Mar 6 07:47:04 2007 +0100
17973 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
17975 As provided by the AMCC applications team, this patch optimizes the
17976 DDR2 setup for 166MHz bus speed. The values provided are also save
17977 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
17978 setup has to be adjusted as done in this patch.
17980 For this the NAND booting version had to include the "speed.c" file
17981 from the cpu/ppc4xx directory. With this addition the NAND SPL image
17982 will just fit into the 4kbytes of program space. gcc version 4.x as
17983 provided with ELDK 4.x is needed to generate this optimized code.
17985 Signed-off-by: Stefan Roese <sr@denx.de>
17987 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
17988 Author: Wolfgang Denk <wd@pollux.denx.de>
17989 Date: Sun Mar 4 01:36:05 2007 +0100
17993 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
17994 Author: Kim Phillips <kim.phillips@freescale.com>
17995 Date: Wed Feb 28 00:02:04 2007 -0600
17997 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
17999 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
18001 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
18002 Author: Kumar Gala <galak@kernel.crashing.org>
18003 Date: Tue Feb 27 23:51:42 2007 -0600
18005 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
18007 The config value for:
18015 Were not being used when setting the appropriate register
18018 * CFG_SCCR_USBMPHCM
18023 To allow full config of the SCCR.
18025 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
18026 that were just bogus.
18028 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18030 commit d51b3cf371cd441030460ef19d36b2924c361b1a
18031 Author: Kim Phillips <kim.phillips@freescale.com>
18032 Date: Thu Feb 22 20:06:57 2007 -0600
18034 mpc83xx: update [local-]mac-address properties on UEC based devices
18036 8360 and 832x weren't updating their [local-]mac-address
18037 properties. This patch fixes that.
18039 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18041 commit 61f4f912acbe60776c5e00df1ec94094ce672957
18042 Author: Timur Tabi <timur@freescale.com>
18043 Date: Tue Feb 13 10:41:42 2007 -0600
18045 mpc83xx: write MAC address to mac-address and local-mac-address
18047 Some device trees have a mac-address property, some have local-mac-address,
18048 and some have both. To support all of these device trees, this patch
18049 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
18050 This function already updates local-mac-address.
18052 Signed-off-by: Timur Tabi <timur@freescale.com>
18054 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
18055 Author: Kim Phillips <kim.phillips@freescale.com>
18056 Date: Tue Feb 27 18:41:08 2007 -0600
18058 mpc83xx: add command line editing by default
18060 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
18061 Author: Kim Phillips <kim.phillips@freescale.com>
18062 Date: Wed Feb 14 19:50:53 2007 -0600
18064 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
18066 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
18067 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
18069 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
18071 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18072 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
18074 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
18075 Author: Xie Xiaobo <r63061@freescale.com>
18076 Date: Wed Feb 14 18:27:17 2007 +0800
18078 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
18080 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
18081 it pass DDR/DDR2 compliance tests.
18083 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
18085 commit b110f40bd180c6b560276589beedf753e97c46ce
18086 Author: Xie Xiaobo <r63061@freescale.com>
18087 Date: Wed Feb 14 18:27:06 2007 +0800
18089 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
18091 MPC8360E rev2.0 have new spridr,and PVR value,
18092 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
18094 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
18096 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
18097 Author: Xie Xiaobo <r63061@freescale.com>
18098 Date: Wed Feb 14 18:26:44 2007 +0800
18100 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
18102 MPC8349E rev3.1 have new spridr,and PVR value,
18103 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
18105 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
18107 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
18108 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
18109 Date: Wed Jan 31 11:04:19 2007 +0100
18111 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
18113 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
18114 which is used to se if an slave will ACK after receiving its address.
18116 Correct i2c probing to use this method as the old method could upset
18117 a slave as it wrote a data byte to it.
18119 Add a small delay in i2c_init() to let the controller
18120 shutdown any ongoing I2C activity.
18122 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
18124 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
18125 Author: Timur Tabi <timur@freescale.com>
18126 Date: Wed Jan 31 15:54:29 2007 -0600
18128 mpc83xx: Add support for the MPC8349E-mITX-GP
18130 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
18131 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
18132 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
18134 Signed-off-by: Timur Tabi <timur@freescale.com>
18136 commit fab16807adad350f618024350c6950165c247c72
18137 Author: Timur Tabi <timur@freescale.com>
18138 Date: Wed Jan 31 15:54:20 2007 -0600
18140 mpc83xx: Delete sdram_init() for MPC8349E-mITX
18142 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
18143 never does anything. This patch deletes it.
18145 Signed-off-by: Timur Tabi <timur@freescale.com>
18147 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
18148 Author: Dave Liu <daveliu@freescale.com>
18149 Date: Fri Jan 19 10:43:26 2007 +0800
18151 mpc83xx: Fix the LAW1/3 bug
18153 The patch solves the alignment problem of the local bus access windows to
18154 render accessible the memory bank and PHY registers of UPC 1 (starting at
18155 0xf801 0000). What we actually did was to adjust the sizes of the bus
18156 access windows so that the base address alignment requirement would be met.
18158 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
18159 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
18160 Signed-off-by: Dave Liu <daveliu@freescale.com>
18162 commit 97c4b397dce236a7318b304667bf89e59d08b17c
18163 Author: Kim Phillips <kim.phillips@freescale.com>
18164 Date: Tue Jan 30 16:15:31 2007 -0600
18166 mpc83xx: don't hang if watchdog configured on 8360, 832x
18168 don't hang if watchdog configured on 8360, 832x
18170 The watchdog programming model is the same across all 83xx devices;
18171 make the code reflect that.
18173 commit b70047478570e371ce7223be342ce98afea0f7d6
18174 Author: Kim Phillips <kim.phillips@freescale.com>
18175 Date: Tue Jan 30 16:15:21 2007 -0600
18177 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
18179 protect memcpy to bad address if a local-mac-address is missing from dt
18181 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
18182 Author: Kim Phillips <kim.phillips@freescale.com>
18183 Date: Tue Jan 30 16:15:04 2007 -0600
18185 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
18187 make 8360 default environment fdt be 8360 (not 8349)
18189 commit a28899c910024a0226331df07207b1038c300c93
18190 Author: Emilian Medve <Emilian.Medve@freescale.com>
18191 Date: Tue Jan 30 16:14:50 2007 -0600
18193 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
18195 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
18196 be used for busy-waiting since it strips the 'volatile' property from
18197 the bd variable. gcc3 was working by pure luck.
18199 This is a follow on patch to "Fix the UEC driver bug of QE"
18201 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
18202 Author: Kumar Gala <galak@kernel.crashing.org>
18203 Date: Tue Jan 30 14:08:30 2007 -0600
18205 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
18207 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
18208 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
18209 CONFIG_MPC834X so they are more generic.
18211 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18213 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
18214 Author: Kim Phillips <kim.phillips@freescale.com>
18215 Date: Thu Jan 25 13:40:55 2007 -0600
18217 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
18219 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
18220 Author: Kim Phillips <kim.phillips@freescale.com>
18221 Date: Wed Jan 24 17:18:37 2007 -0600
18223 mpc83xx: sort Makefile targets
18225 reordered targets alphabetically
18227 commit 91e25769771c1164ed63ffca0add49f934ae3343
18228 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
18229 Date: Tue Jan 16 11:38:14 2007 -0500
18231 mpc83xx: U-Boot support for Wind River SBC8349
18233 I've redone the SBC8349 support to match git-current, which
18234 incorporates all the MPC834x updates from Freescale since the 1.1.6
18235 release, including the DDR changes.
18237 I've kept all the SBC8349 files as parallel as possible to the
18238 MPC8349EMDS ones for ease of maintenance and to allow for easy
18239 inspection of what was changed to support this board. Hence the SBC8349
18240 U-Boot has FDT support and everything else that the MPC8349EMDS has.
18242 Fortunately the Freescale updates added support for boards using CS0,
18243 but I had to change spd_sdram.c to allow for board specific settings for
18244 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
18245 default if the board doesn't specify a value.)
18247 Hopefully this should be mergeable as-is and require no whitespace
18248 cleanups or similar, but if something doesn't measure up then let me
18249 know and I'll fix it.
18254 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
18255 Author: Sam Song <samsongshu@yahoo.com.cn>
18256 Date: Thu Dec 14 19:03:21 2006 +0800
18258 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
18260 A redundant semicolon existed in mpc8349itx.c
18263 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
18265 commit f35f358241c549be3f75cfe2eaa642914275b7ba
18266 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
18267 Date: Wed Dec 6 21:23:55 2006 -0500
18269 mpc83xx: Put the version (and magic) after the HRCW.
18271 Put the version (and magic) after the HRCW. This puts it in a fixed
18272 location in flash, not at the start of flash but as close as we can get.
18274 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
18276 commit 48aecd969171a6e99a55fae04933857787f9a5bd
18277 Author: Dave Liu <r63238@freescale.com>
18278 Date: Thu Dec 7 21:14:51 2006 +0800
18280 mpc83xx: Add the MPC832XEMDS board readme
18282 Add the MPC832XEMDS board readme
18284 Signed-off-by: Dave Liu <daveliu@freescale.com>
18286 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
18287 Author: Dave Liu <r63238@freescale.com>
18288 Date: Thu Dec 7 21:13:15 2006 +0800
18290 mpc83xx: Add support for the MPC832XEMDS board
18292 This patch supports DUART, ETH3/4 and PCI etc.
18294 Signed-off-by: Dave Liu <daveliu@freescale.com>
18296 commit e080313c32322e15ab5a18eb896a252858c57284
18297 Author: Dave Liu <r63238@freescale.com>
18298 Date: Thu Dec 7 21:11:58 2006 +0800
18300 mpc83xx: streamline the 83xx immr head file
18302 For better format and style, I streamlined the 83xx head files,
18303 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
18304 duplicated macro definition appear in the both files; 2) the structure
18305 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
18306 macro definition put inside the each structure. So, I cleaned up the
18307 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
18308 moved the macro definition to mpc83xx.h, Just like MPC8260.
18312 *streamline the 83xx immr head file
18314 Signed-off-by: Dave Liu <daveliu@freescale.com>
18316 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
18317 Author: Dave Liu <r63238@freescale.com>
18318 Date: Wed Dec 6 11:38:17 2006 +0800
18320 mpc83xx: Fix the UEC driver bug of QE
18322 The patch prevents the GCC tool chain from striping useful code for
18323 optimization. It will make UEC ethernet driver workable, Otherwise the
18324 UEC will fail in tx when you are using gcc4.x. but the driver can work
18325 when using gcc3.4.3.
18329 *Prevent the GCC from striping code for optimization, Otherwise the UEC
18330 will tx failed when you are using gcc4.x.
18332 Signed-off-by: Dave Liu <daveliu@freescale.com>
18334 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
18335 Author: Stefan Roese <sr@denx.de>
18336 Date: Thu Mar 1 21:11:36 2007 +0100
18338 [PATCH] Update AMCC Katmai 440SPe eval board support
18340 This patch updates the recently added Katmai board support. The biggest
18341 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
18344 Please note, that still some problems are left with some memory
18345 configurations. See the driver for more details.
18347 Signed-off-by: Stefan Roese <sr@denx.de>
18349 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
18350 Author: Stefan Roese <sr@denx.de>
18351 Date: Thu Mar 1 07:03:25 2007 +0100
18353 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
18355 Signed-off-by: Stefan Roese <sr@denx.de>
18357 commit ccbc7036648e465697ca298ba51e0e76dda352a0
18358 Author: Wolfgang Denk <wd@pollux.denx.de>
18359 Date: Wed Feb 28 01:28:53 2007 +0100
18361 SC3: fix typo in default environment
18363 commit e344568b1b46af85ec32d815586f91bc115d6223
18364 Author: Sergei Poselenov <sposelenov@emcraft.com>
18365 Date: Tue Feb 27 20:15:30 2007 +0300
18367 MCC200: Fixes for update procedure
18369 - fix logic error in image type handling
18370 - make sure file system images (cramfs etc.) get stored in flash
18371 with image header stripped so they can be mounted through MTD
18373 commit 743571145b37182757d4e688a77860b36ee77573
18374 Author: Wolfgang Denk <wd@pollux.denx.de>
18375 Date: Tue Feb 27 14:26:04 2007 +0100
18377 Minor code cleanup.
18379 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
18380 Author: Sergei Poselenov <sposelenov@emcraft.com>
18381 Date: Tue Feb 27 12:40:16 2007 +0300
18383 MCC200 update - add LCD Progress Indicator
18385 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
18386 Author: Stefan Roese <sr@denx.de>
18387 Date: Thu Feb 22 07:43:34 2007 +0100
18389 [PATCH] get_dev() now unconditionally uses manual relocation
18391 Since the relocation fix is not included yet and we're not sure how
18392 it will be added, this patch removes code that required relocation
18393 to be fixed for now.
18395 Signed-off-by: Stefan Roese <sr@denx.de>
18397 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
18398 Author: Stefan Roese <sr@denx.de>
18399 Date: Thu Feb 22 07:40:23 2007 +0100
18401 [PATCH] Change systemace driver to select 8 & 16bit mode
18403 As suggested by Grant Likely this patch enables the Xilinx SystemACE
18404 driver to select 8 or 16bit mode upon startup.
18406 Signed-off-by: Stefan Roese <sr@denx.de>
18408 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
18409 Author: Haiying Wang <Haiying.Wang@freescale.com>
18410 Date: Wed Feb 21 16:52:31 2007 +0100
18412 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
18414 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
18415 is fully finished. The sync() is defined in each CPU's io.h file. For
18416 those CPUs which do not need sync for now, a dummy sync() is defined in
18417 their io.h as well.
18419 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
18421 commit da04995c7dc6772013a9a0dc5c767f190c402478
18422 Author: Stefan Roese <sr@denx.de>
18423 Date: Wed Feb 21 13:44:34 2007 +0100
18425 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
18427 Signed-off-by: Stefan Roese <sr@denx.de>
18429 commit 751bb57107d78978ae08e697c3deba816f5be091
18430 Author: Stefan Roese <sr@denx.de>
18431 Date: Tue Feb 20 13:21:57 2007 +0100
18433 [PATCH] Fix relocation problem with "new" get_dev() function
18435 This patch enables the "new" get_dev() function for block devices
18436 introduced by Grant Likely to be used on systems that still suffer
18437 from the relocation problems (manual relocation neede because of
18438 problems with linker script).
18440 Hopefully we can resolve this relocation issue soon for all platform
18441 so we don't need this additional code anymore.
18443 Signed-off-by: Stefan Roese <sr@denx.de>
18445 commit d93e2212f962668b3dce091ff5edc33f2347fe37
18446 Author: Stefan Roese <sr@denx.de>
18447 Date: Tue Feb 20 13:17:42 2007 +0100
18449 [PATCH] Update SystemACE driver for 16bit access
18451 This patch removes some problems when the Xilinx SystemACE driver
18452 is used with 16bit access on an big endian platform (like the
18455 Signed-off-by: Stefan Roese <sr@denx.de>
18457 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
18458 Author: Stefan Roese <sr@denx.de>
18459 Date: Tue Feb 20 13:15:40 2007 +0100
18461 [PATCH] Clean up Katmai (440SPe) linker script
18463 Signed-off-by: Stefan Roese <sr@denx.de>
18465 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
18466 Author: Stefan Roese <sr@denx.de>
18467 Date: Tue Feb 20 10:57:08 2007 +0100
18469 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
18471 Signed-off-by: Stefan Roese <sr@denx.de>
18473 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
18474 Author: Stefan Roese <sr@denx.de>
18475 Date: Tue Feb 20 10:51:26 2007 +0100
18477 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
18479 This patch switches to the desired I2C bus when the date/dtt
18480 commands are called. This can be configured using the
18481 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
18483 Signed-off-by: Stefan Roese <sr@denx.de>
18485 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
18486 Author: Stefan Roese <sr@denx.de>
18487 Date: Tue Feb 20 10:43:34 2007 +0100
18489 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
18491 This patch adds support for the DDR2 controller used on the
18492 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
18493 board and works fine with the following DIMM modules:
18495 - Corsair CM2X512-5400C4 (512MByte per DIMM)
18496 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
18497 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
18499 This patch also adds the nice functionality to dynamically
18500 create the TLB entries for the SDRAM (tlb.c). So we should
18501 never run into such problems with wrong (too short) TLB
18502 initialization again on these platforms.
18504 Signed-off-by: Stefan Roese <sr@denx.de>
18506 commit 36d830c9830379045f5daa9f542ac1c990c70068
18507 Author: Stefan Roese <sr@denx.de>
18508 Date: Tue Feb 20 10:35:42 2007 +0100
18510 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
18512 Since the existing 4xx SPD SDRAM initialization routines for the
18513 405 SDRAM controller and the 440 DDR controller don't have much in
18514 common this patch splits both drivers into different files.
18516 This is in preparation for the 440 DDR2 controller support (440SP/e).
18518 Signed-off-by: Stefan Roese <sr@denx.de>
18520 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
18521 Author: Stefan Roese <sr@denx.de>
18522 Date: Tue Feb 20 10:27:08 2007 +0100
18524 [PATCH] PPC4xx: Add support for multiple I2C busses
18526 This patch adds support for multiple I2C busses on the PPC4xx
18527 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
18528 to make use of this feature.
18530 It also merges the 405 and 440 i2c header files into one common
18533 Also the 4xx i2c reset procedure is reworked since I experienced
18534 some problems with the first access on the 440SPe Katmai board.
18536 Signed-off-by: Stefan Roese <sr@denx.de>
18538 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
18539 Author: Grant Likely <grant.likely@secretlab.ca>
18540 Date: Tue Feb 20 09:05:45 2007 +0100
18542 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
18544 Block device read/write is anonymous data; there is no need to use a
18545 typed pointer. void * is fine. Also add a hook for block_read functions
18547 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18549 commit 53758fa20e935cc87eeb0519ed365df753a6f289
18550 Author: Grant Likely <grant.likely@secretlab.ca>
18551 Date: Tue Feb 20 09:05:38 2007 +0100
18553 [PATCH 8_9] Add block_write hook to block_dev_desc_t
18555 Preparation for future patches which support block device writing
18557 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18559 commit f4852ebe6ca946a509667eb68be42026f837be76
18560 Author: Grant Likely <grant.likely@secretlab.ca>
18561 Date: Tue Feb 20 09:05:31 2007 +0100
18563 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
18565 Register read/write does not need to be wrapped in a full function. The
18566 patch replaces them with macros.
18568 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18570 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
18571 Author: Grant Likely <grant.likely@secretlab.ca>
18572 Date: Tue Feb 20 09:05:23 2007 +0100
18574 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
18576 The code in this file is not a command; it is a device driver. Put it in
18577 the correct place. There are zero functional changes in this patch, it
18578 only moves the file.
18580 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18582 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
18583 Author: Grant Likely <grant.likely@secretlab.ca>
18584 Date: Tue Feb 20 09:05:16 2007 +0100
18586 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
18588 This patch is in preparation of additional changes to the sysace driver.
18589 May as well take this opportunity to fixup the inconsistent whitespace since
18590 this file is about to undergo major changes anyway.
18592 There are zero functional changes in this patch. It only cleans up the
18595 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18597 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
18598 Author: Grant Likely <grant.likely@secretlab.ca>
18599 Date: Tue Feb 20 09:05:07 2007 +0100
18601 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
18603 isprint is already defined in ctype.c
18605 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18607 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
18608 Author: Grant Likely <grant.likely@secretlab.ca>
18609 Date: Tue Feb 20 09:05:00 2007 +0100
18611 [PATCH 3_9] Move buffer print code from md command to common function
18613 Printing a buffer is a darn useful thing. Move the buffer print code
18614 into print_buffer() in lib_generic/
18616 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18618 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
18619 Author: Grant Likely <grant.likely@secretlab.ca>
18620 Date: Tue Feb 20 09:04:52 2007 +0100
18622 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
18624 Change the xilinx device drivers and board code to include config.h
18625 instead of xparameters.h directly. config.h always includes the
18626 correct xparameters file. This change reduces the posibility of
18627 including the wrong file when adding a new xilinx board port
18629 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18631 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
18632 Author: Grant Likely <grant.likely@secretlab.ca>
18633 Date: Tue Feb 20 09:04:34 2007 +0100
18635 [PATCH 1_4] Merge common get_dev() routines for block devices
18637 Each of the filesystem drivers duplicate the get_dev routine. This change
18638 merges them into a single function in part.c
18640 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18642 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
18643 Author: Wolfgang Denk <wd@pollux.denx.de>
18644 Date: Mon Feb 19 23:09:51 2007 +0100
18646 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
18647 as root file system images.
18649 commit 489c696ae7211218961d159e43e722d74c36fcbc
18650 Author: Sergei Poselenov <sposelenov@emcraft.com>
18651 Date: Wed Feb 14 14:30:28 2007 +0300
18653 MCC200: Extensions to Software Update Mechanism
18655 Update / extend Software Update Mechanism for MCC200 board:
18657 - Add support for rootfs image added. The environment variables
18658 "rootfs_st" and "rootfs_nd" can be used to override the default
18659 values of the image start and end.
18660 - Remove excessive key check code.
18663 commit 4be23a12f23f1372634edc3215137b09768b7949
18664 Author: Stefan Roese <sr@denx.de>
18665 Date: Mon Feb 19 08:23:15 2007 +0100
18667 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
18669 As spotted by Matthias Fuchs, the READY input should not be
18670 enabled for the NOR FLASH on the Sequoia board.
18672 Signed-off-by: Stefan Roese <sr@denx.de>
18674 commit 2605e90bf676d48123afe5719a846d2b52b24aac
18675 Author: Heiko Schocher <hs@pollux.denx.de>
18676 Date: Fri Feb 16 07:57:42 2007 +0100
18678 [PATCH] Added support for the jupiter board.
18680 Signed-off-by: Heiko Schocher <hs@denx.de>
18682 commit 497d012e5be0194e1084073d0081eb1a844796b2
18683 Author: Gary Jennejohn <garyj@pollux.denx.de>
18684 Date: Mon Feb 12 13:11:50 2007 +0100
18686 LPC2292: patch from Siemens.
18688 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
18689 Author: Stefan Roese <sr@denx.de>
18690 Date: Sat Feb 10 08:49:31 2007 +0100
18692 [PATCH] Add missing p3mx.h file to repository (ups)
18694 Signed-off-by: Stefan Roese <sr@denx.de>
18696 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
18697 Author: Bartlomiej Sieka <tur@semihalf.com>
18698 Date: Fri Feb 9 10:45:42 2007 +0100
18700 [Motion-PRO] Preliminary support for the Motion-PRO board.
18702 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
18703 Author: Stefan Roese <sr@denx.de>
18704 Date: Wed Feb 7 16:51:08 2007 +0100
18706 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
18708 Some boards that can have more than 768MBytes of SDRAM need to
18709 set "initrd_high", so that the initrd can be accessed by the
18712 Signed-off-by: Stefan Roese <sr@denx.de>
18714 commit 7372ca68227930d03cffa548310524cad5b96733
18715 Author: Stefan Roese <sr@denx.de>
18716 Date: Fri Feb 2 12:44:22 2007 +0100
18718 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
18720 Previously the strapping DCR/SDR was read to determine if the internal PCI
18721 arbiter is enabled or not. This strapping bit can be overridden, so now
18722 the current status is read from the correct DCR/SDR register.
18724 Signed-off-by: Stefan Roese <sr@denx.de>
18726 commit 2aa54f651a42d198673318f07a20c89a43e4d197
18727 Author: Stefan Roese <sr@denx.de>
18728 Date: Fri Feb 2 12:42:08 2007 +0100
18730 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
18732 Signed-off-by: Stefan Roese <sr@denx.de>
18734 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
18735 Author: Stefan Roese <sr@denx.de>
18736 Date: Thu Feb 1 13:22:41 2007 +0100
18738 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
18740 When PCI PNP is enabled the pci pnp configuration routine is called
18741 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
18742 problems with some PCI cards. For now disable the PCI PNP configuration.
18744 Signed-off-by: Stefan Roese <sr@denx.de>
18746 commit 2902fadade3be7659467e8d074048c6b7068f5c0
18747 Author: Stefan Roese <sr@denx.de>
18748 Date: Wed Jan 31 16:56:10 2007 +0100
18750 [PATCH] Update 440EPx/440GRx cpu detection
18752 Signed-off-by: Stefan Roese <sr@denx.de>
18754 commit d5ea287b02a6945c3977410e364a879dd1a555c8
18755 Author: Stefan Roese <sr@denx.de>
18756 Date: Wed Jan 31 16:38:04 2007 +0100
18758 [PATCH] Update esd cpci5200 files
18760 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
18762 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
18763 Author: Stefan Roese <sr@denx.de>
18764 Date: Wed Jan 31 16:37:34 2007 +0100
18766 [PATCH] Add support for esd mecp5200 board
18768 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
18770 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
18771 Author: Stefan Roese <sr@denx.de>
18772 Date: Wed Jan 31 12:38:50 2007 +0100
18774 [PATCH] Remove unneccessary yellowstone board config file
18776 Signed-off-by: Stefan Roese <sr@denx.de>
18778 commit e802594b6fa1b166308820c276b96dc0d7cc731c
18779 Author: Stefan Roese <sr@denx.de>
18780 Date: Tue Jan 30 17:06:10 2007 +0100
18782 [PATCH] Update Sequoia (440EPx) config file
18784 The config file now handles the 2nd target, the Rainier (440GRx)
18785 evaluation board better. Additionally the PPC input clock was
18786 adjusted to match the correct value of 33.0 MHz.
18788 Signed-off-by: Stefan Roese <sr@denx.de>
18790 commit 700200c67e73b83751418abe7815840dca8fd6cb
18791 Author: Stefan Roese <sr@denx.de>
18792 Date: Tue Jan 30 17:04:19 2007 +0100
18794 [PATCH] Merge Yosemite & Yellowstone board ports
18796 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
18797 share one config file and all board specific files. This way we
18798 don't have to maintain two different sets of files for nearly
18801 Signed-off-by: Stefan Roese <sr@denx.de>
18803 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
18804 Author: Stefan Roese <sr@denx.de>
18805 Date: Tue Jan 30 15:01:49 2007 +0100
18807 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
18809 SCPU doesn't use redundant environment in flash.
18811 Signed-off-by: Stefan Roese <sr@denx.de>
18813 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
18814 Author: Stefan Roese <sr@denx.de>
18815 Date: Tue Jan 30 12:51:07 2007 +0100
18817 [PATCH] alpr: Update alpr board config file
18819 Signed-off-by: Stefan Roese <sr@denx.de>
18821 commit f8db84f132b1e335f20f96138a1f09ed97b08664
18822 Author: Wolfgang Denk <wd@pollux.denx.de>
18823 Date: Tue Jan 30 00:50:40 2007 +0100
18825 LPC2292 SODIMM port coding style cleanup.
18827 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
18828 Author: Gary Jennejohn <garyj@pollux.denx.de>
18829 Date: Wed Jan 24 12:16:56 2007 +0100
18831 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
18833 commit 2daf046ba627f85f44195815778140039636244e
18834 Author: Bartlomiej Sieka <tur@semihalf.com>
18835 Date: Tue Jan 23 17:22:06 2007 +0100
18837 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
18839 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
18840 Author: Bartlomiej Sieka <tur@semihalf.com>
18841 Date: Tue Jan 23 14:21:14 2007 +0100
18843 [iDMR] Flash driver on initialisation write-protects some sectors,
18844 currently sectors 0-3. Sector 3 does not need to be protected, though
18845 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
18846 fixes this, i.e., only sectors 0-2 are protected.
18848 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
18849 Author: Bartlomiej Sieka <tur@semihalf.com>
18850 Date: Tue Jan 23 14:11:22 2007 +0100
18852 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
18853 "mii device" results in "Unexpected exception"). Fixing this properly
18854 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
18855 this commit disables MII commads for now.
18857 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
18858 Author: Bartlomiej Sieka <tur@semihalf.com>
18859 Date: Tue Jan 23 13:25:22 2007 +0100
18861 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
18862 Identification Register (CIR).
18864 commit fdef388758506765d4d6a7155c8f1584c63ff581
18865 Author: roy zang <tie-fei.zang@freescale.com>
18866 Date: Mon Jan 22 13:19:21 2007 +0800
18868 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
18869 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
18870 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
18873 commit a4012396645533aef218354eeba754dff0deace8
18874 Author: Wolfgang Denk <wd@pollux.denx.de>
18875 Date: Fri Jan 19 23:08:39 2007 +0100
18877 Minor code cleanup.
18879 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
18880 Author: Heiko Schocher <hs@pollux.denx.de>
18881 Date: Fri Jan 19 19:57:10 2007 +0100
18883 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
18885 Signed-off-by: Heiko Schocher <hs@denx.de>
18887 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
18888 Author: Heiko Schocher <hs@pollux.denx.de>
18889 Date: Fri Jan 19 18:05:26 2007 +0100
18891 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
18892 if you must swap the bytes between reading/writing.
18893 (Needed for the SC3 board)
18895 Signed-off-by: Heiko Schocher <hs@denx.de>
18897 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
18898 Author: Stefan Roese <sr@denx.de>
18899 Date: Thu Jan 18 16:05:47 2007 +0100
18901 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
18903 Signed-off-by: Stefan Roese <sr@denx.de>
18905 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
18906 Author: Stefan Roese <sr@denx.de>
18907 Date: Thu Jan 18 11:54:52 2007 +0100
18909 [PATCH] Update Prodrive P3Mx support
18911 Signed-off-by: Stefan Roese <sr@denx.de>
18913 commit 34167a36c29ee946b727465db5c014746a08e978
18914 Author: Stefan Roese <sr@denx.de>
18915 Date: Thu Jan 18 11:48:10 2007 +0100
18917 [PATCH] Add missing Taishan config file
18919 Signed-off-by: Stefan Roese <sr@denx.de>
18921 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
18922 Author: Heiko Schocher <hs@pollux.denx.de>
18923 Date: Thu Jan 18 11:28:51 2007 +0100
18925 [PATCH] Fix: Compilerwarnings for SC3 board.
18926 The EBC Configuration Register is now by CFG_EBC_CFG definable
18927 Added JFFS2 support for the SC3 board.
18929 Signed-off-by: Heiko Schocher <hs@denx.de>
18931 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
18932 Author: Stefan Roese <sr@denx.de>
18933 Date: Thu Jan 18 10:25:34 2007 +0100
18935 [PATCH] Add support for AMCC Taishan PPC440GX eval board
18937 Signed-off-by: Stefan Roese <sr@denx.de>
18939 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
18940 Author: Wolfgang Denk <wd@pollux.denx.de>
18941 Date: Tue Jan 16 18:30:50 2007 +0100
18943 Raname solidcard3 into sc3; add redundant env for sc3
18945 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
18946 Author: Wolfgang Denk <wd@pollux.denx.de>
18947 Date: Tue Jan 16 12:46:35 2007 +0100
18949 Update default environment for Solidcard3
18951 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
18952 Author: Stefan Roese <sr@denx.de>
18953 Date: Mon Jan 15 09:46:29 2007 +0100
18955 [PATCH] Fix 440SPe rev B detection from previous patch
18957 Signed-off-by: Stefan Roese <sr@denx.de>
18959 commit a443d31410c571ee8f970da819a44d698fdd6b1f
18960 Author: Heiko Schocher <hs@pollux.denx.de>
18961 Date: Sun Jan 14 13:35:31 2007 +0100
18963 [FIX] correct I2C Writes for the LM81 Sensor.
18965 Signed-off-by: Heiko Schocher <hs@denx.de>
18967 commit 0bba5452835f19a61204edcda3a58112fd8e2208
18968 Author: Wolfgang Denk <wd@pollux.denx.de>
18969 Date: Sat Jan 13 11:17:10 2007 +0100
18971 Undo commit 3033ebb2: reset command does not take any arguments
18973 Haiying Wang's modification to the reset command was broken, undo it.
18975 Signed-off-by: Wolfgang Denk <wd@denx.de>
18977 commit 95981778cff0038fd9941044d6a3eda810e33258
18978 Author: Stefan Roese <sr@denx.de>
18979 Date: Sat Jan 13 08:01:03 2007 +0100
18981 [PATCH] Update 440SP(e) cpu revisions
18983 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
18985 Signed-off-by: Stefan Roese <sr@denx.de>
18987 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
18988 Author: Stefan Roese <sr@denx.de>
18989 Date: Sat Jan 13 07:59:56 2007 +0100
18991 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
18993 Now the board revision and the current PCI bus speed are printed after
18996 Also the EBC initialising is now done via defines in the board config
18999 Signed-off-by: Stefan Roese <sr@denx.de>
19001 commit 36adff362c2c0141ff8a810d42a7e478f779130f
19002 Author: Stefan Roese <sr@denx.de>
19003 Date: Sat Jan 13 07:59:19 2007 +0100
19005 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
19007 Now the board revision and the current PCI bus speed are printed after
19010 Also the EBC initialising is now done via defines in the board config
19013 Signed-off-by: Stefan Roese <sr@denx.de>
19015 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
19016 Author: Stefan Roese <sr@denx.de>
19017 Date: Sat Jan 13 07:57:51 2007 +0100
19019 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
19021 Now the board revision and the current PCI bus speed are printed after
19024 Signed-off-by: Stefan Roese <sr@denx.de>
19026 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
19027 Author: Heiko Schocher <hs@pollux.denx.de>
19028 Date: Thu Jan 11 15:44:44 2007 +0100
19030 Added support for the SOLIDCARD III board from Eurodesign
19032 Signed-off-by: Heiko Schocher <hs@denx.de>
19034 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
19035 Author: Reinhard Thies <Reinhard.Thies@web.de>
19036 Date: Wed Jan 10 14:41:14 2007 +0100
19038 Adjusted default environment for cam5200 board.
19040 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
19041 Author: Wolfgang Denk <wd@pollux.denx.de>
19042 Date: Wed Jan 10 15:35:52 2007 +0100
19046 commit 787fa15860a57833e50bd30555079a9cd4e519b8
19047 Author: Wolfgang Denk <wd@pollux.denx.de>
19048 Date: Wed Jan 10 01:28:39 2007 +0100
19050 Fix auto_update for MCC200 board.
19052 The invocation of do_auto_update() is moved to the end of the
19053 misc_init_r() function, after the flash mappings have been
19054 initialized. Please find attached a patch that implements that
19057 Also correct the decoding of the keypad status. With this update, the
19058 key that will trigger the update is Column 2, Row 2.
19060 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
19061 Author: Marian Balakowicz <m8@semihalf.com>
19062 Date: Wed Jan 10 00:26:15 2007 +0100
19064 CAM5200 flash driver modifications:
19065 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
19066 - add second build target 'cam5200_niosflash' which still uses custom driver
19068 commit 67fea022fa957f59653b5238c7496f80a6b70432
19069 Author: Markus Klotzbuecher <mk@denx.de>
19070 Date: Tue Jan 9 16:02:48 2007 +0100
19072 SPC1920: cleanup memory contoller setup
19074 commit 8fc2102faa23593c80381437c09f7745a14deb40
19075 Author: Markus Klotzbuecher <mk@denx.de>
19076 Date: Tue Jan 9 14:57:14 2007 +0100
19078 Fix the cpu speed setup to work with all boards.
19080 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
19081 Author: Markus Klotzbuecher <mk@denx.de>
19082 Date: Tue Jan 9 14:57:13 2007 +0100
19084 SPC1920: add support for the FM18L08 Ramtron FRAM
19086 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
19087 Author: Markus Klotzbuecher <mk@denx.de>
19088 Date: Tue Jan 9 14:57:13 2007 +0100
19090 SPC1920: update the HPI register addresses to work with the second
19091 generation of hardware
19093 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
19094 Author: Markus Klotzbuecher <mk@creamnet.de>
19095 Date: Tue Jan 9 14:57:13 2007 +0100
19097 Miscellanious spc1920 related cleanups
19099 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
19100 Author: Markus Klotzbuecher <mk@denx.de>
19101 Date: Tue Jan 9 14:57:12 2007 +0100
19103 SPC1920 GO/NOGO led should be set to color red in U-Boot
19105 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
19106 Author: Markus Klotzbuecher <mk@creamnet.de>
19107 Date: Tue Jan 9 14:57:12 2007 +0100
19109 Add support for the DS3231 RTC
19111 commit 8139567b60d678584b05f0718a681f2047c5e14f
19112 Author: Markus Klotzbuecher <mk@creamnet.de>
19113 Date: Tue Jan 9 14:57:11 2007 +0100
19115 SMC1 uses external CLK4 instead of BRG on spc1920
19117 commit d8d9de1a02fbd880b613d607143d1f57342affc7
19118 Author: Markus Klotzbuecher <mk@creamnet.de>
19119 Date: Tue Jan 9 14:57:10 2007 +0100
19121 Update the SPC1920 CMB PLD driver
19123 commit 3f34f869162750e5e999fd140f884f5de952bcfe
19124 Author: Markus Klotzbuecher <mk@creamnet.de>
19125 Date: Tue Jan 9 14:57:10 2007 +0100
19127 Add / enable I2C support on the spc1920 board
19129 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
19130 Author: Markus Klotzbuecher <mk@creamnet.de>
19131 Date: Tue Jan 9 14:57:10 2007 +0100
19133 Add support for the tms320671x host port interface (HPI)
19135 commit f4eb54529bb3664c3a562e488b460fe075f79d67
19136 Author: Wolfgang Denk <wd@pollux.denx.de>
19137 Date: Sun Jan 7 00:13:11 2007 +0100
19139 Prepare for release 1.2.0
19141 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
19142 Author: Stefan Roese <sr@denx.de>
19143 Date: Sat Jan 6 15:58:09 2007 +0100
19145 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
19147 This patch fixes a problem with an incorrect setup for the refresh
19148 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
19150 Signed-off-by: Stefan Roese <sr@denx.de>
19152 commit f16c1da9577f06c5fc08651a4065537407de4635
19153 Author: Stefan Roese <sr@denx.de>
19154 Date: Sat Jan 6 15:56:13 2007 +0100
19156 [PATCH] Update ALPR board files
19158 This update brings the ALPR board support to the newest version.
19159 It also fixes a problem with the NAND driver.
19161 Signed-off-by: Stefan Roese <sr@denx.de>
19163 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
19164 Author: Stefan Roese <sr@denx.de>
19165 Date: Fri Jan 5 11:46:05 2007 +0100
19167 [PATCH] nand: Fix problem with oobsize calculation
19169 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
19171 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
19172 returns a 0x15. In the code fragment below bits [1:0] determine the
19173 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
19174 next field is also ANDed with 0x3. However this is a one bit field
19175 as defined in the Hynix and Samsung parts in the 4th ID byte that
19176 determins the oobsize, not a two bit field. It works on Samsung as
19177 bits[3:2] are 01. However for the Hynix there is a 11 in these two
19178 bits, so the oob size gets messed up.
19180 I checked the correct linux code and the suggested fix from Brian is
19181 also available in the linux nand mtd driver.
19183 Signed-off-by: Stefan Roese <sr@denx.de>
19185 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
19186 Author: Stefan Roese <sr@denx.de>
19187 Date: Fri Jan 5 10:40:36 2007 +0100
19189 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
19191 This fix will make the MAL burst disabling patch for the Linux
19192 EMAC driver obsolete.
19194 Signed-off-by: Stefan Roese <sr@denx.de>
19196 commit 023889838282b6237b401664f22dd22dfba2c066
19197 Author: Stefan Roese <sr@denx.de>
19198 Date: Fri Jan 5 10:38:05 2007 +0100
19200 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
19202 This code will optimize the DDR2 controller setup on a board specific
19205 Note: This code doesn't work right now on the NAND booting image for the
19206 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
19208 Signed-off-by: Stefan Roese <sr@denx.de>
19210 commit cce4acbb68398634b8d011ed7bb0d12269c84230
19211 Author: Bartlomiej Sieka <tur@semihalf.com>
19212 Date: Thu Dec 28 19:08:21 2006 +0100
19215 - fix a typo in V38B config file
19216 - move watchdog initialisation earlier in the boot process
19217 - add "wdt=off" to default kernel command line (disables kernel watchdog)
19219 commit 92eb729bad876725aeea908d2addba0800620840
19220 Author: Wolfgang Denk <wd@pollux.denx.de>
19221 Date: Wed Dec 27 01:26:13 2006 +0100
19223 Fix bug in adaption of Stefano Babic's CFI driver patch.
19225 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
19226 Author: Wolfgang Denk <wd@pollux.denx.de>
19227 Date: Sun Dec 24 01:42:57 2006 +0100
19229 Minor code cleanup.
19231 commit d784fdb05900ada3686d5778783e1fb328e9fb66
19232 Author: Stefano Babic <sbabic@denx.de>
19233 Date: Tue Dec 12 00:22:42 2006 +0100
19235 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
19237 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
19238 Author: Stefan Roese <sr@denx.de>
19239 Date: Fri Dec 22 14:29:40 2006 +0100
19241 [PATCH] Fix sequoia flash autodetection (finally correct)
19243 Now 32MByte and 64MByte FLASH is know to work and other
19244 configurations should work too.
19246 Signed-off-by: Stefan Roese <sr@denx.de>
19248 commit 82e5236a8b719543643fd26d5827938ab2b94818
19249 Author: Wolfgang Denk <wd@pollux.denx.de>
19250 Date: Fri Dec 22 10:30:26 2006 +0100
19252 Minor code cleanup; update CHANGELOG.
19254 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
19255 Author: Heiko Schocher <hs@pollux.denx.de>
19256 Date: Thu Dec 21 17:17:02 2006 +0100
19258 Added support for the TQM8272 board from TQ
19260 Signed-off-by: Heiko Schocher <hs@denx.de>
19262 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
19263 Author: Heiko Schocher <hs@pollux.denx.de>
19264 Date: Thu Dec 21 16:14:48 2006 +0100
19266 [PATCH] Add support for the UC101 board from MAN.
19268 Signed-off-by: Heiko Schocher <hs@denx.de>
19270 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
19271 Author: Bartlomiej Sieka <tur@semihalf.com>
19272 Date: Wed Dec 20 00:29:43 2006 +0100
19274 Fix to make the baudrate changes immediate for the MCF52x2 family.
19276 commit daa6e418bcc0c717752e8de939c213c790286096
19277 Author: Bartlomiej Sieka <tur@semihalf.com>
19278 Date: Wed Dec 20 00:27:32 2006 +0100
19280 Preliminary support for the iDMR board (ColdFire).
19282 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
19283 Author: Andrei Safronov <safronov@pollux.denx.de>
19284 Date: Fri Dec 8 16:23:08 2006 +0100
19286 automatic update mechanism
19288 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
19289 Author: roy zang <tie-fei.zang@freescale.com>
19290 Date: Mon Dec 4 17:56:59 2006 +0800
19292 Slight code clean up.
19293 Add comments, delete duplicate define and remove spaces.
19294 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
19296 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
19297 Author: roy zang <tie-fei.zang@freescale.com>
19298 Date: Mon Dec 4 17:54:21 2006 +0800
19300 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
19301 multiplier table can not refect the real PLL clock behavior of these
19302 processors. Please refer to the hardware specification for detailed
19303 information of the corresponding processors.
19304 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
19306 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
19307 Author: roy zang <tie-fei.zang@freescale.com>
19308 Date: Mon Dec 4 14:46:23 2006 +0800
19310 Remove the static MAC address, ip address, server ip, netmask and
19311 gateway ip for network setting.
19312 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
19314 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
19315 Author: roy zang <tie-fei.zang@freescale.com>
19316 Date: Mon Dec 4 14:33:08 2006 +0800
19318 Remove the duplicate memory test code for mpc744ihpc2 board.
19319 If a memory test is needed, please use the functions in
19320 post/memory.c or memtest command.
19321 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
19323 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
19324 Author: roy zang <tie-fei.zang@freescale.com>
19325 Date: Fri Dec 1 19:01:25 2006 +0800
19327 Fix the exception occuring in RAM table search issue.
19328 The original search_one_table() function code can only processes the search
19329 for the exception occurring in FLASH/ROM, because the exception and fixup
19330 table usually locate in FLASH. If the exception address is also in
19331 FLASH, it will be OK.
19332 If the exception occurs in RAM, after the u-boot relocation, a
19333 relocation offset should be added.
19335 clean up the code in cpu/74xx_7xx/cpu.c
19337 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
19339 commit ee311214e0d216f904feea269599d0934bf71f23
19340 Author: roy zang <tie-fei.zang@freescale.com>
19341 Date: Fri Dec 1 11:47:36 2006 +0800
19343 Clean up the code according to codestyle:
19344 (1) remove some C++ comments.
19345 (2) remove trailing white space.
19346 (3) remove trailing empty line.
19347 (4) Indentation by table.
19348 (5) remove {} in one line condition.
19349 (6) add space before '(' in function call.
19350 Remove some weird printf () output.
19351 Add necessary comments.
19352 Modified Makefile to support building in a separate directory.
19354 commit dd520bf314c7add4183c5191692180f576f96b60
19355 Author: Wolfgang Denk <wd@pollux.denx.de>
19356 Date: Thu Nov 30 18:02:20 2006 +0100
19360 commit 8d9a8610b8256331132227e9e6585c6bd5742787
19361 Author: Wolfgang Denk <wd@pollux.denx.de>
19362 Date: Thu Nov 30 01:54:07 2006 +0100
19364 Code cleanup. Update CHANGELOG.
19366 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
19367 Author: Grant Likely <grant.likely@secretlab.ca>
19368 Date: Wed Nov 29 16:23:42 2006 +0100
19370 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
19372 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
19373 not the XLB frequency.
19375 This patch depends on the previous patches for MPC52xx device tree support
19377 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19378 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
19380 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
19381 Author: Stefan Roese <sr@denx.de>
19382 Date: Wed Nov 29 15:42:37 2006 +0100
19384 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
19386 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
19387 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
19388 quite similar and share the same board directory "prodrive/p3mx"
19389 and the same config file "p3mx.h".
19391 Signed-off-by: Stefan Roese <sr@denx.de>
19393 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
19394 Author: Stefan Roese <sr@denx.de>
19395 Date: Wed Nov 29 12:53:15 2006 +0100
19397 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
19399 In the bootvx command the load address was only read from the env
19400 variable "loadaddr" and not optionally passed as paramter as described
19401 in the help. This is fixed with this patch. The behaviour is now the
19402 same as in the bootelf command.
19404 Signed-off-by: Stefan Roese <sr@denx.de>
19406 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
19407 Author: Stefan Roese <sr@denx.de>
19408 Date: Wed Nov 29 12:03:57 2006 +0100
19410 [PATCH] include/ppc440.h minor error affecting interrupts
19412 Fixed include/ppc440.c for UIC address Bug
19414 Corrects bug affecting the addresses for the universal interrupt
19415 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
19417 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
19418 Signed-off-by: Stefan Roese <sr@denx.de>
19420 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
19421 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
19422 Date: Tue Nov 28 16:17:27 2006 -0600
19424 Make fsl-i2c not conflict with SOFT I2C
19426 Signed-off-by: Timur Tabi <timur@freescale.com>
19428 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
19429 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
19430 Date: Tue Nov 28 16:17:18 2006 -0600
19432 Fix I2C master address initialization.
19434 Signed-off-by: Timur Tabi <timur@freescale.com>
19436 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
19437 Author: Kim Phillips <kim.phillips@freescale.com>
19438 Date: Tue Nov 28 23:31:19 2006 -0600
19440 Assign maintainers for mpc8349emds and mpc8360emds
19442 Dave for mpc8360emds, and me for mpc8349emds.
19444 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
19445 Author: Kim Phillips <kim.phillips@freescale.com>
19446 Date: Tue Nov 28 23:28:33 2006 -0600
19448 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
19450 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
19451 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
19453 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
19454 Author: Timur Tabi <timur@freescale.com>
19455 Date: Tue Nov 28 12:09:35 2006 -0600
19457 mpc83xx: Miscellaneous code style fixes
19459 Implement various code style fixes and similar changes.
19461 Signed-off-by: Timur Tabi <timur@freescale.com>
19463 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
19464 Author: Stefan Roese <sr@denx.de>
19465 Date: Tue Nov 28 17:55:49 2006 +0100
19467 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
19469 This patch adds the code and configuration necessary to boot with an
19470 arch/powerpc Linux kernel.
19472 Signed-off-by: Grant Likely <grant.likely@gmail.com>
19473 Acked-by: Jon Loeliger <jdl@freescale.com>
19475 commit e732faec95a83cb468b4850ae807c8301dde8f6a
19476 Author: Stefan Roese <sr@denx.de>
19477 Date: Tue Nov 28 16:09:24 2006 +0100
19479 [PATCH] PPC4xx: 440SP Rev. C detection added
19481 Signed-off-by: Stefan Roese <sr@denx.de>
19483 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
19484 Author: Stefan Roese <sr@denx.de>
19485 Date: Tue Nov 28 11:04:45 2006 +0100
19487 [PATCH] nand: Fix patch merge problem
19489 Signed-off-by: Stefan Roese <sr@denx.de>
19491 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
19492 Author: Stefan Roese <sr@denx.de>
19493 Date: Tue Nov 28 11:04:45 2006 +0100
19495 [PATCH] nand: Fix patch merge problem
19497 Signed-off-by: Stefan Roese <sr@denx.de>
19499 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
19500 Author: Wolfgang Denk <wd@pollux.denx.de>
19501 Date: Mon Nov 27 22:53:53 2006 +0100
19505 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
19506 Author: Stefan Roese <sr@denx.de>
19507 Date: Mon Nov 27 17:43:25 2006 +0100
19509 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
19511 Patch below corrects the setting of the zmiifer register, it was
19512 overwritting the register rather than ORing the settings.
19514 Signed-off-by: Neil Wilson <NWilson@airspan.com>
19515 Signed-off-by: Stefan Roese <sr@denx.de>
19517 commit d1a72545296800b7e219f93104ad5836f0003d66
19518 Author: Stefan Roese <sr@denx.de>
19519 Date: Mon Nov 27 17:34:10 2006 +0100
19521 [PATCH] Select NAND embedded environment from board configuration
19523 The current NAND Bootloader setup forces the environment
19524 variables to be in line with the bootloader. This change
19525 enables the configuration to be made in the board include
19526 file instead so that it can be individually enabled.
19528 Signed-off-by: Nick Spence <nick.spence@freescale.com>
19529 Signed-off-by: Stefan Roese <sr@denx.de>
19531 commit 15784862857c3c2214498defcfed84ff137fb81e
19532 Author: Stefan Roese <sr@denx.de>
19533 Date: Mon Nov 27 17:22:19 2006 +0100
19535 [PATCH] nand_wait() timeout fixes
19537 Two fixes for the nand_wait() function in
19538 drivers/nand/nand_base.c:
19540 1. Use correct timeouts. The original timeouts in Linux
19541 source are 400ms and 20ms not 40s and 20s
19543 2. Return correct error value in case of timeout. 0 is
19546 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
19547 Signed-off-by: Stefan Roese <sr@denx.de>
19549 commit da5553b095bf04f4f109ad7e565dae3aba47b230
19550 Author: Stefan Roese <sr@denx.de>
19551 Date: Mon Nov 27 17:04:06 2006 +0100
19553 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
19555 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
19556 arguments to bootm. It removes the getenv("disable_of") test that used
19557 to be used for this purpose.
19559 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
19560 Acked-by: Jon Loeliger <jdl@freescale.com>
19562 commit a9398e018593782c5fa7d0741955fc1256b34c1e
19563 Author: Wolfgang Denk <wd@pollux.denx.de>
19564 Date: Mon Nov 27 15:32:42 2006 +0100
19566 Minor code cleanup. Update CHANGELOG.
19568 commit 1729b92cde575476684bffe819d0b7791b57bff2
19569 Author: Stefan Roese <sr@denx.de>
19570 Date: Mon Nov 27 14:52:04 2006 +0100
19572 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
19574 Signed-off-by: Stefan Roese <sr@denx.de>
19576 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
19577 Author: Stefan Roese <sr@denx.de>
19578 Date: Mon Nov 27 14:49:51 2006 +0100
19580 [PATCH] alpr: remove unused board specific flash driver
19582 Signed-off-by: Stefan Roese <sr@denx.de>
19584 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
19585 Author: Stefan Roese <sr@denx.de>
19586 Date: Mon Nov 27 14:48:41 2006 +0100
19588 [PATCH] 4xx: Fix problem with board specific reset code
19590 Signed-off-by: Stefan Roese <sr@denx.de>
19592 commit ec0c2ec725aec9524a177a77ce75559e644a931a
19593 Author: Stefan Roese <sr@denx.de>
19594 Date: Mon Nov 27 14:46:06 2006 +0100
19596 [PATCH] Remove testing 4xx enet PHY setup
19598 Signed-off-by: Stefan Roese <sr@denx.de>
19600 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
19601 Author: Stefan Roese <sr@denx.de>
19602 Date: Mon Nov 27 14:12:17 2006 +0100
19604 [PATCH] Update Prodrive ALPR board support (440GX)
19606 Signed-off-by: Stefan Roese <sr@denx.de>
19608 commit 58b485776698c3d71ec5a215e392123b4c15afa3
19609 Author: Markus Klotzbuecher <mk@denx.de>
19610 Date: Mon Nov 27 11:51:21 2006 +0100
19612 Add a small README with information on the generic ohci driver.
19614 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
19615 Author: Markus Klotzbuecher <mk@denx.de>
19616 Date: Mon Nov 27 11:46:46 2006 +0100
19618 Fix some endianness issues related to the generic ohci driver
19620 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
19621 Author: Markus Klotzbuecher <mk@denx.de>
19622 Date: Mon Nov 27 11:44:58 2006 +0100
19624 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
19625 to choose between the old and the generic OHCI drivers.
19627 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
19628 Author: Markus Klotzbuecher <mk@denx.de>
19629 Date: Mon Nov 27 11:43:09 2006 +0100
19631 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
19632 and adapted board configs TQM5200 and yosemite accordingly. This commit
19633 also makes the maximum number of root hub ports configurable
19634 (CFG_USB_OHCI_MAX_ROOT_PORTS).
19636 commit 78d620ebb5871d252270dedfad60c6568993b780
19637 Author: Wolfgang Denk <wd@atlas.denx.de>
19638 Date: Thu Nov 23 22:58:58 2006 +0100
19640 Updates for TQM5200 modules:
19641 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
19642 - simplify "udate" definitions
19644 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
19645 Author: Stefan Roese <sr@denx.de>
19646 Date: Wed Nov 22 13:20:50 2006 +0100
19648 [PATCH] PPC4xx start.S: Fix for processor errata
19650 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
19651 errata 1.12: 440_33 by moving patch up in code.
19653 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
19654 Signed-off-by: Stefan Roese <sr@denx.de>
19656 commit 4ef6251403f637841000e0fef9e832aa01339822
19657 Author: Stefan Roese <sr@denx.de>
19658 Date: Mon Nov 20 20:39:52 2006 +0100
19660 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
19662 Signed-off-by: Stefan Roese <sr@denx.de>
19664 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
19665 Author: Wolfgang Denk <wd@pollux.denx.de>
19666 Date: Mon Nov 20 10:28:30 2006 +0100
19670 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
19671 Author: Stefan Roese <sr@denx.de>
19672 Date: Mon Nov 13 13:55:24 2006 +0100
19674 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
19676 * Adds support for AMD command set Top Boot flash geometry reversal
19677 * Adds support for reading JEDEC Manufacturer ID and Device ID
19678 * Adds support for displaying command set, manufacturer id and
19679 device ids (flinfo)
19680 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
19681 * Removes outdated change history (refer to git log instead)
19683 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
19684 Signed-off-by: Stefan Roese <sr@denx.de>
19686 commit b21b511d4c50408f4853f46f06b601272196223f
19687 Author: Wolfgang Denk <wd@pollux.denx.de>
19688 Date: Sun Nov 12 21:13:23 2006 +0100
19692 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
19693 Author: Bartlomiej Sieka <tur@semihalf.com>
19694 Date: Sat Nov 11 22:48:22 2006 +0100
19696 Disable the watchdog in the default config for the V38B board.
19698 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
19699 Author: Bartlomiej Sieka <tur@semihalf.com>
19700 Date: Sat Nov 11 22:43:00 2006 +0100
19702 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
19703 group is enabled for USB earlier (in cpu_init_f() instead of
19704 usb_lowlevel_init()).
19706 commit 91650b3e4de688038d4f71279c44858e3e2c6870
19707 Author: Wolfgang Denk <wd@pollux.denx.de>
19708 Date: Mon Nov 6 17:06:36 2006 +0100
19710 Sequential accesses to non-existent memory must be synchronized,
19711 at least on G2 cores.
19713 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
19715 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
19716 Author: Timur Tabi <timur@freescale.com>
19717 Date: Fri Nov 3 19:15:00 2006 -0600
19719 mpc83xx: Update 83xx to use fsl_i2c.c
19721 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
19722 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
19723 Added multiple I2C bus support to fsl_i2c.c.
19725 Signed-off-by: Timur Tabi <timur@freescale.com>
19727 commit d239d74b1c937984bc519083a8e7de373a390f06
19728 Author: Timur Tabi <timur@freescale.com>
19729 Date: Fri Nov 3 12:00:28 2006 -0600
19731 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
19733 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
19734 tree matches the other 8xxx trees.
19736 Signed-off-by: Timur Tabi <timur@freescale.com>
19738 commit f7fb2e703ec9688541416962724adff70a7322cb
19739 Author: Kim Phillips <kim.phillips@freescale.com>
19740 Date: Thu Nov 2 19:47:11 2006 -0600
19742 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
19744 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
19745 Author: Dave Liu <daveliu@freescale.com>
19746 Date: Thu Nov 2 18:05:50 2006 -0600
19748 mpc83xx: Fix the incorrect dcbz operation
19750 The 834x rev1.x silicon has one CPU5 errata.
19752 The issue is when the data cache locked with
19753 HID0[DLOCK], the dcbz instruction looks like no-op inst.
19755 The right behavior of the data cache is when the data cache
19756 Locked with HID0[DLOCK], the dcbz instruction allocates
19759 The 834x rev3.0 and later and 8360 have not this bug inside.
19761 So, when 834x rev3.0/8360 are working with ECC, the dcbz
19762 instruction will corrupt the stack in cache, the processor will
19765 However, the 834x rev1.x can work with ECC with these code,
19766 because the sillicon has this cache bug. The dcbz will not
19767 corrupt the stack in cache.
19768 Really, it is the fault code running on fault sillicon.
19770 This patch fix the incorrect dcbz operation. Instead of
19771 CPU FP writing to initialise the ECC.
19774 * Fix the incorrect dcbz operation instead of CPU FP
19775 writing to initialise the ECC memory. Otherwise, it
19776 will corrupt the stack in cache, The processor will checkstop
19779 Signed-off-by: Dave Liu <daveliu@freescale.com>
19781 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
19782 Author: Kim Phillips <kim.phillips@freescale.com>
19783 Date: Wed Nov 1 00:10:40 2006 -0600
19785 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
19787 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
19788 STDOUT_PATH configuration bits to mpc8349emds,
19789 mpc8349itx, and mpc8360emds board code.
19791 redo environment to use bootm with the fdtaddr
19792 for booting ARCH=powerpc kernels by default,
19793 and provide default fdtaddr values.
19795 commit 48041365b3420589ad464ebc7752e0053538b729
19796 Author: Kim Phillips <kim.phillips@freescale.com>
19797 Date: Wed Nov 1 00:07:25 2006 -0600
19799 mpc83xx: change ft code to modify local-mac-address property
19801 Update 83xx OF code to update local-mac-address properties
19802 for ethernet instead of the obsolete 'address' property.
19804 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
19805 Author: Timur Tabi <timur@freescale.com>
19806 Date: Tue Oct 31 21:23:16 2006 -0600
19808 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
19810 This patch also adds an improved I2C set_speed(), which handles all clock
19813 Signed-off-by: Timur Tabi <timur@freescale.com>
19815 commit ac4b5622ce050b5ee1e154b98df630d778661632
19816 Author: Dave Liu <daveliu@freescale.com>
19817 Date: Tue Oct 31 19:54:59 2006 -0600
19819 mpc83xx: add the README.mpc8360emds
19821 add doc/README.mpc8360emds to accompany the new board support
19823 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
19824 Author: Dave Liu <daveliu@freescale.com>
19825 Date: Fri Nov 3 12:11:15 2006 -0600
19827 mpc83xx: add QE ethernet support
19829 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
19831 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
19832 Author: Dave Liu <daveliu@freescale.com>
19833 Date: Fri Nov 3 19:33:44 2006 -0600
19835 mpc83xx: Add MPC8360EMDS basic board support
19837 Add support for the Freescale MPC8360EMDS board.
19838 Includes DDR, DUART, Local Bus, PCI.
19840 commit 23892e49352de74f7fac36ff90bb1be143d195e3
19841 Author: Dave Liu <daveliu@freescale.com>
19842 Date: Tue Oct 31 19:30:40 2006 -0600
19844 mpc83xx: add the QUICC Engine (QE) immap file
19846 common QE immap file. Also required for 8360.
19848 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
19849 Author: Dave Liu <daveliu@freescale.com>
19850 Date: Tue Oct 31 19:25:38 2006 -0600
19852 mpc83xx: Add 8360 specifics to 83xx immap
19854 Mainly add QE device dependencies, with appropriate 8360 protection.
19857 commit 988833324a7fda482c8ac3ca23eb539f8232e404
19858 Author: Timur Tabi <timur@freescale.com>
19859 Date: Tue Oct 31 19:14:41 2006 -0600
19861 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
19863 PREREQUISITE PATCHES:
19865 * This patch can only be applied after the following patches have been applied:
19867 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
19868 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
19872 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
19873 the clock for the 2nd USB board (Linux kernel will hang otherwise),
19874 and fix the CONFIG_BOOTARGS macro.
19876 Signed-off-by: Timur Tabi <timur@freescale.com>
19878 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
19879 Author: Timur Tabi <timur@freescale.com>
19880 Date: Tue Oct 31 18:44:42 2006 -0600
19882 mpc83xx: Add support for the MPC8349E-mITX
19884 PREREQUISITE PATCHES:
19886 * This patch can only be applied after the following patches have been applied:
19888 1) DNX#2006090742000024 "Add support for multiple I2C buses"
19889 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
19890 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
19891 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
19892 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
19896 * Add support for the Freescale MPC8349E-mITX reference design platform.
19897 The second TSEC (Vitesse 7385 switch) is not supported at this time.
19899 Signed-off-by: Timur Tabi <timur@freescale.com>
19901 commit 183da6d9b446cc12123455844ad1187e2375626f
19902 Author: Ben Warren <bwarren@qstreams.com>
19903 Date: Tue Sep 12 10:15:53 2006 -0400
19905 Additional MPC8349 support for multibus i2c
19909 Here is a patch for a file that was accidentally left out of a previous
19912 It accompanies the patch with ticket DNX#2006090742000024
19915 Change PCI initialization to use new multi-bus I2C API.
19920 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
19921 Author: Ben Warren <bwarren@qstreams.com>
19922 Date: Thu Sep 7 16:51:04 2006 -0400
19924 Multi-bus I2C implementation of MPC834x
19928 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
19929 family and the MPC8349EMDS board in particular.
19930 This patch requires Patch 1 (Add support for multiple I2C buses).
19931 Testing was performed on a 533MHz board.
19933 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
19935 Signed-off-by: Ben Warren <bwarren@qstreams.com>
19938 Implemented driver-level code to support two I2C buses on the
19939 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
19940 are 50kHz, 100kHz and 400kHz on each bus.
19945 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
19946 Author: Ben Warren <bwarren@qstreams.com>
19947 Date: Thu Sep 7 16:50:54 2006 -0400
19949 Add support for multiple I2C buses
19953 Attached is a patch providing support for multiple I2C buses at the
19954 command level. The second part of the patch includes an implementation
19955 for the MPC834x CPU and MPC8349EMDS board.
19957 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
19959 Signed-off-by: Ben Warren <bwarren@qstreams.com>
19963 1. Include new 'i2c' command (based on USB implementation) using
19964 CONFIG_I2C_CMD_TREE.
19966 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
19967 the commands to change bus number and speed are only available under the
19968 new 'i2c' command mentioned in the first bullet.
19970 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
19971 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
19972 of an array of bus-device pairs. Otherwise, it is an array of uchar.
19975 Added new 'i2c' master command for all I2C interaction. This is
19976 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
19977 setting I2C bus speed as well as changing the active bus if the board
19978 has more than one (conditionally compiled with
19979 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
19985 commit bed85caf872714ebf53013967a695c9d63acfc68
19986 Author: Timur Tabi <timur@freescale.com>
19987 Date: Tue Oct 31 18:13:36 2006 -0600
19989 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
19993 * Errata DDR6, which affects all current MPC 834x processors, lists changes
19994 required to maintain compatibility with various types of DDR memory. This
19995 patch implements those changes.
19997 Signed-off-by: Timur Tabi <timur@freescale.com>
19999 commit afd6e470f639883002c7c59d562690a5cb0f4865
20000 Author: Timur Tabi <timur@freescale.com>
20001 Date: Wed Oct 25 18:45:23 2006 -0500
20003 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
20005 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
20006 Author: Timur Tabi <timur@freescale.com>
20007 Date: Tue Aug 22 17:07:00 2006 -0500
20009 mpc83xx: Add support for variable flash memory sizes on 83xx systems
20013 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
20014 window registers, instead of using a hard-coded value of 8MB.
20016 Signed-off-by: Timur Tabi <timur@freescale.com>
20018 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
20019 Author: Tanya Jiang <tanya.jiang@freescale.com>
20020 Date: Thu Aug 3 18:38:13 2006 +0800
20022 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
20024 Unified TQM834x variable names with 83xx and consolidated macro
20025 in preparation for the 8360 and other upcoming 83xx devices.
20027 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
20029 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
20030 Author: Dave Liu <daveliu@freescale.com>
20031 Date: Wed Oct 25 14:41:21 2006 -0500
20033 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
20035 Incorporated the common unified variable names and the changes in preparation
20036 for releasing mpc8360 patches.
20038 Signed-off-by: Dave Liu <daveliu@freescale.com>
20040 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
20041 Author: Tanya Jiang <tanya.jiang@freescale.com>
20042 Date: Thu Aug 3 18:36:02 2006 +0800
20044 mpc83xx: Fix missing build for mpc8349emds pci.c
20046 Make pci build for mpc8349emds
20048 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
20050 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
20051 Author: Tanya Jiang <tanya.jiang@freescale.com>
20052 Date: Thu Aug 3 18:39:49 2006 +0800
20054 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
20056 Removed unused file resetvec.S for mpc83xx cpu
20058 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
20060 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
20061 Author: Nick Spence <Nick.Spence@freescale.com>
20062 Date: Sat Sep 30 00:32:59 2006 -0700
20064 NAND Flash verify across block boundaries
20066 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
20068 and the write crosses a block boundary. The pointer to the verification
20069 buffer (bufstart) is not being updated to reflect the starting of the
20071 block so the verification of the second block fails.
20075 * Fix NAND FLASH page verification across block boundaries
20077 commit f484dc791a3932537213c43c654cc1295c64b84c
20078 Author: Nick Spence <nick.spence@freescale.com>
20079 Date: Thu Sep 7 07:39:46 2006 -0700
20081 Added RGMII support to the TSECs and Marvell 881111 Phy
20083 Added a phy initialization to adjust the RGMII RX and TX timing
20084 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
20086 Signed-off-by: Nick Spence <nick.spence@freescale.com>
20088 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
20089 Author: roy zang <tie-fei.zang@freescale.com>
20090 Date: Fri Nov 3 13:10:00 2006 +0800
20092 Remove some unused CFG define.
20093 undef CFG_DRAM_TEST
20095 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
20096 Author: roy zang <tie-fei.zang@freescale.com>
20097 Date: Fri Nov 3 13:07:36 2006 +0800
20099 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
20100 Both work. 0xFF000000 seems more reasonable.
20102 commit c59200443072353044aa4bf737a5a60f9a9af231
20103 Author: Wolfgang Denk <wd@pollux.denx.de>
20104 Date: Thu Nov 2 15:15:01 2006 +0100
20106 Release U-Boot 1.1.6
20108 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
20109 Author: roy zang <tie-fei.zang@freescale.com>
20110 Date: Thu Nov 2 19:14:48 2006 +0800
20112 This patch comes from Yuli's posted patch on 8/8/2006
20113 titled "CFI Driver Little-Endian write Issue".
20115 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
20117 If that patch applied, please discard this one.
20118 Until now , I do not see his patch is applied. So please apply this one.
20120 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
20121 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20123 commit b825f158e449e1e9cf74c08e572955e122394c96
20124 Author: roy zang <tie-fei.zang@freescale.com>
20125 Date: Thu Nov 2 19:12:31 2006 +0800
20127 Tsi108 on chip i2c support.
20129 The i2c Interface provides a master-only, serial interface that can be
20130 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
20133 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
20134 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20136 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
20137 Author: roy zang <tie-fei.zang@freescale.com>
20138 Date: Thu Nov 2 19:11:06 2006 +0800
20140 Tsi108 on chip pci controller support.
20142 If there is no pci card, the tsi108/109 pci configure read will
20143 cause a machine check exception to the processor. PCI error should
20144 also be cleared after the read.
20146 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
20147 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20149 commit d1927cee977126e547ceeba23e4f978f377cfb8f
20150 Author: roy zang <tie-fei.zang@freescale.com>
20151 Date: Thu Nov 2 19:08:55 2006 +0800
20153 Tundra tsi108 on chip Ethernet controller support.
20155 The following is a brief description of the Ethernet controller:
20156 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
20157 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
20158 to manage the two physical connection devices (PHYs). Each Ethernet port
20159 has its own statistics monitor that tracks and reports key interface
20160 statistics. Each port supports a 256-entry hash table for address
20161 filtering. In addition, each port is bridged to the Switch Fabric
20162 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
20164 Each Ethernet port also has a pair of internal Ethernet DMA channels to
20165 support the transmit and receive data flows. The Ethernet DMA channels
20166 use descriptors set up in memory, the memory map of the device, and
20167 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
20168 handles arbitration for the Switch Fabric. The Controller also
20169 has a register businterface for register accesses and status monitor
20172 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
20173 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
20174 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
20175 data flows to and from the Ethernet Controller through the Switch Fabric.
20177 Each Ethernet port uses its transmit and receive DMA channels to manage
20178 data flows through buffer descriptors that are predefined by the
20179 system (the descriptors can exist anywhere in the system memory map).
20180 These descriptors are data structures that point to buffers filled
20181 with data ready to transmit over Ethernet, or they point to empty
20182 buffers ready to receive data from Ethernet.
20184 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
20185 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20187 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
20188 Author: roy zang <tie-fei.zang@freescale.com>
20189 Date: Thu Nov 2 19:01:33 2006 +0800
20191 Tundra tsi108 header file.
20193 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
20194 PowerPC processors that offers numerous system interconnect options for
20195 embedded application designers. The Tsi108 can interconnect 60x or
20196 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
20197 and Flash. Provided the macro define for tsi108 chip.
20199 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
20200 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20202 commit 87c4db09699c6b89176b31004afcb83eb1585d47
20203 Author: roy zang <tie-fei.zang@freescale.com>
20204 Date: Thu Nov 2 18:59:15 2006 +0800
20206 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
20207 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
20209 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
20210 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20212 commit 27801b8ab11c61b577e45742a515bb3b23b80241
20213 Author: roy zang <tie-fei.zang@freescale.com>
20214 Date: Thu Nov 2 18:57:21 2006 +0800
20216 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
20217 Make ,config.mk and link file for the mpc7448hpc2 board.
20219 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
20220 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20222 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
20223 Author: roy zang <tie-fei.zang@freescale.com>
20224 Date: Thu Nov 2 18:55:04 2006 +0800
20226 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
20227 The mpc7448hpc2 board support header file.
20229 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
20230 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20232 commit 625bb5ddb50b243f931262ca8c46956409471917
20233 Author: roy zang <tie-fei.zang@freescale.com>
20234 Date: Thu Nov 2 18:52:21 2006 +0800
20236 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
20237 The mpc7448hpc2 board support low level assemble language init code.
20239 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
20240 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20242 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
20243 Author: roy zang <tie-fei.zang@freescale.com>
20244 Date: Thu Nov 2 18:49:51 2006 +0800
20246 General code modification for mpc7448hpc2 board support.
20247 1. Add 7447A and 7448 processor support.
20248 2. Add the following flags.
20250 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
20251 (such as by switch on board), this flag should be set.
20253 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
20254 relocates to RAM, this flag should be set.
20256 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
20257 system hang in exception, this flag should be set.
20259 There is a design issue for tsi108/109 pci configure read. When pci scan
20260 the slots, if there is no pci card, the tsi108/9 will cause a machine
20261 check exception for mpc7448 processor.
20263 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
20264 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20266 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
20267 Author: roy zang <tie-fei.zang@freescale.com>
20268 Date: Thu Nov 2 18:34:47 2006 +0800
20270 Add README file for mpc7448hpc2 board.
20271 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
20273 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
20274 Author: Bartlomiej Sieka <tur@semihalf.com>
20275 Date: Wed Nov 1 02:04:38 2006 +0100
20277 Finish up support for MarelV38B board
20278 - add watchdog support
20279 - enable GPIO_WKUP_7 pin for input
20282 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
20283 Author: Bartlomiej Sieka <tur@semihalf.com>
20284 Date: Wed Nov 1 01:45:46 2006 +0100
20286 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
20287 * remove warnings when compiling ethaddr.c
20288 * adjust linker script (fixes a crash resulting from incorrect
20289 definition of __u_boot_cmd_start)
20290 - Some MarelV38B code cleanup.
20292 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
20293 Author: Bartlomiej Sieka <tur@semihalf.com>
20294 Date: Wed Nov 1 01:38:16 2006 +0100
20296 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
20297 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
20298 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
20299 MPC5XXX_WU_GPIO_DATA_O for affected boards.
20301 - Add defintions for some MPC5XXX GPIO pins.
20303 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
20304 Author: Bartlomiej Sieka <tur@semihalf.com>
20305 Date: Wed Nov 1 01:34:29 2006 +0100
20307 Changed MarelV38B board make target to lowercase. Config file cleanup.
20309 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
20310 Author: Wolfgang Denk <wd@pollux.denx.de>
20311 Date: Sun Oct 29 01:03:51 2006 +0200
20313 Automatically adjust ARFLAGS so "make -s" is really silent.
20315 commit fae684e89844856383bdf101440889557df3e6b1
20316 Author: Stefan Roese <sr@denx.de>
20317 Date: Sat Oct 28 16:45:00 2006 +0200
20319 [PATCH] omap925.c: Remove unused functions
20321 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
20322 Signed-off-by: Stefan Roese <sr@denx.de>
20324 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
20325 Author: Stefan Roese <sr@denx.de>
20326 Date: Sat Oct 28 17:12:58 2006 +0200
20328 [PATCH] Add some missing machtypes for netstar & voiceblue boards
20330 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
20333 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
20334 Signed-off-by: Stefan Roese <sr@denx.de>
20336 commit 856f054410cef52d868feb330168b2a4c4091328
20337 Author: Stefan Roese <sr@denx.de>
20338 Date: Sat Oct 28 15:55:52 2006 +0200
20340 [PATCH] NAND: Partition name support added to NAND subsystem
20342 chpart, nboot and NAND subsystem related commands now accept also partition
20343 name to specify offset.
20345 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
20346 Signed-off-by: Stefan Roese <sr@denx.de>
20348 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
20349 Author: Wolfgang Denk <wd@pollux.denx.de>
20350 Date: Sat Oct 28 02:29:44 2006 +0200
20354 commit 2751a95abd1b96911081c357e96a12fa97b40dee
20355 Author: Wolfgang Denk <wd@pollux.denx.de>
20356 Date: Sat Oct 28 02:29:14 2006 +0200
20358 Enable commandline editing and hush shell on all TQM boards.
20360 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
20361 Author: Wolfgang Denk <wd@pollux.denx.de>
20362 Date: Sat Oct 28 02:28:02 2006 +0200
20364 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
20366 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
20367 Author: Wolfgang Denk <wd@denx.de>
20368 Date: Sat Oct 28 01:14:32 2006 +0200
20370 Check for illegal character '=' in environment variable names.
20372 Make sure the string passed as variable name does not contain a '='
20373 character. This not only prevents the common error or typing
20374 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
20375 also closes a backdoor which allowed to delete write-protected
20376 environment variables, for example by using "setenv ethaddr=".
20378 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
20379 Author: Wolfgang Denk <wd@pollux.denx.de>
20380 Date: Sat Oct 28 00:38:39 2006 +0200
20382 Minor code cleanup.
20384 commit e11887a77d81077416a2d1c5e0354916fee8c034
20385 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
20386 Date: Thu Oct 26 17:55:31 2006 +0200
20388 Don't pass any debug options directly to the assembler
20390 When passing the -g option to gcc, gcc automatically selects a
20391 suitable --g<format> option to pass on to the assembler.
20392 Thus, there's no point in forcing a specific debug option on the
20393 assembler using the -Wa mechanism.
20395 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
20397 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
20398 Author: Jon Loeliger <jdl@freescale.com>
20399 Date: Fri Oct 27 07:47:22 2006 -0500
20401 MPC86xx: Cleaned up unused and conditionally used local variables.
20403 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20405 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
20406 Author: Wolfgang Denk <wd@pollux.denx.de>
20407 Date: Fri Oct 27 11:55:21 2006 +0200
20409 Fix "ar" flags in some Makefiles to allow for silent "make -s"
20411 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
20412 Author: Ben Warren <bwarren@qstreams.com>
20413 Date: Thu Oct 26 14:38:25 2006 -0400
20415 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
20416 to a TSEC (e.g. a switch is connected via RMII) or
20417 if the PHY is defective/incorrectly configured.
20419 Signed-off-by: Ben Warren <bwarren@qstreams.com>
20421 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
20422 Author: Ben Warren <bwarren@qstreams.com>
20423 Date: Thu Oct 26 14:38:25 2006 -0400
20425 Fix TSEC driver: avoid crashes if PHY is not attached
20426 to a TSEC (e.g. a switch is connected via RMII) or
20427 if the PHY is defective/incorrectly configured.
20429 Signed-off-by: Ben Warren <bwarren@qstreams.com>
20431 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
20432 Author: Wolfgang Denk <wd@pollux.denx.de>
20433 Date: Thu Oct 26 16:24:31 2006 +0200
20437 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
20438 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
20439 Date: Wed Oct 25 15:48:59 2006 +0200
20441 Finish up support for the ATSTK1000/ATSTK1002 boards
20443 Add atstk1002_config target to Makefile and move the AVR32 section
20444 down below Blackfin so that it doesn't end up in the middle of
20447 Drop the autogenerated linker script thing for now. Will have to
20448 revisit how to handle chips with different flash and RAM layout
20451 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
20453 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
20454 Author: Kumar Gala <galak@kernel.crashing.org>
20455 Date: Tue Oct 24 23:47:37 2006 -0500
20457 Added support for Multi-Image files that contain a device tree
20459 If a Multi-Image file contains a third image we try to use it as a
20460 device tree. The device tree image is assumed to be uncompressed in the
20461 image file. We automatically allocate space for the device tree in memory
20462 and provide an 8k pad to allow more than a reasonable amount of growth.
20464 Additionally, a device tree that was contained in flash will now automatically
20465 get copied to system memory as part of boot. Previously an error was
20466 reported if one tried to boot a device tree that was in flash.
20468 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20470 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
20471 Author: Wolfgang Denk <wd@denx.de>
20472 Date: Tue Oct 24 21:35:55 2006 +0200
20474 Switch to automatically generated CHANGELOG file.
20475 (use "make CHANGELOG" to update it from time to time)
20477 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
20478 Author: Stefan Roese <sr@denx.de>
20479 Date: Tue Oct 24 18:06:48 2006 +0200
20481 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
20482 Patch by Stefan Roese, 24 Oct 2006
20484 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
20485 Author: Wolfgang Denk <wd@pollux.denx.de>
20486 Date: Tue Oct 24 17:24:55 2006 +0200
20488 Merge with /home/wd/git/u-boot/master
20490 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
20491 Author: Wolfgang Denk <wd@pollux.denx.de>
20492 Date: Tue Oct 24 15:32:57 2006 +0200
20496 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
20497 Author: Wolfgang Denk <wd@pollux.denx.de>
20498 Date: Tue Oct 24 14:51:36 2006 +0200
20500 Move atstk1000 files into vendor specific directory.
20501 Patch by Haavard Skinnemoen, 12 Sep 2006
20503 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
20504 Author: Wolfgang Denk <wd@pollux.denx.de>
20505 Date: Tue Oct 24 14:42:37 2006 +0200
20507 Add ATSTK1000 and ATSTK1002 board support
20508 Patch by Haavard Skinnemoen, 06 Sep 2006
20510 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
20513 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
20514 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
20515 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
20516 CompactFlash cards. For more information, please see this page:
20518 http://www.atmel.com/dyn/products/tools.asp?family_id=682
20520 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
20523 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
20525 commit f93ae788c3640fcde5db383471d45548ff4060d0
20526 Author: Wolfgang Denk <wd@pollux.denx.de>
20527 Date: Tue Oct 24 14:31:24 2006 +0200
20529 Add common serial driver for Atmel AT32 and AT91 chips
20530 Patch by Haavard Skinnemoen, 06 Sep 2006
20532 This is a first attempt at creating a common serial driver for Atmel
20533 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
20534 be possible to support AT91RM9200 and other ARM-based chips with some
20535 minor modifications.
20537 There's nothing fundamentally AVR32-specific in this driver, but it
20538 does use some features which are currently only defined for the
20540 * pm_get_clock_freq: Obtain the clock frequency of a given domain
20541 * gd->console_uart: A "struct device" containing information about
20542 register mappings, gpio resources and clocks associated with the
20545 For more information about these features, please see the "AT32AP
20548 commit 72a087e04705c26cad982879ebd06b5281bf825a
20549 Author: Wolfgang Denk <wd@pollux.denx.de>
20550 Date: Tue Oct 24 14:27:35 2006 +0200
20552 Add AT32AP CPU and AT32AP7000 SoC support
20553 Patch by Haavard Skinnemoen, 06 Sep 2006
20555 This patch adds support for the AT32AP CPU family and the AT32AP7000
20556 chip, which is the first chip implementing the AVR32 architecture.
20558 The AT32AP CPU core is a high-performance implementation featuring a
20559 7-stage pipeline, separate instruction- and data caches, and a MMU.
20560 For more information, please see the "AVR32 AP Technical Reference":
20562 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
20564 In addition to this, the AT32AP7000 chip comes with a large set of
20565 integrated peripherals, many of which are shared with the AT91 series
20566 of ARM-based microcontrollers from Atmel. Full data sheet is
20569 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
20571 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
20573 commit 7b64fef33c66be648826c0ff9758298ef13d0604
20574 Author: Wolfgang Denk <wd@pollux.denx.de>
20575 Date: Tue Oct 24 14:21:16 2006 +0200
20577 Add AVR32 architecture support
20578 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
20580 This patch adds common infrastructure code for the Atmel AVR32
20581 architecture. See doc/README.AVR32 for details.
20583 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
20585 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
20586 Author: Wolfgang Denk <wd@pollux.denx.de>
20587 Date: Tue Oct 24 13:57:33 2006 +0200
20589 Use -g instead of -gstabs in AFLAGS_DEBUG
20590 Patch by Haavard Skinnemoen, 30 Aug 2006
20592 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
20593 matter what the target's preferred debugging format is. This patch
20594 simply replaces -gstabs with -g, so that the default debugging format
20595 for the architecture is used.
20597 commit 965829872169c2996023840d98e1d85ad148d629
20598 Author: Wolfgang Denk <wd@pollux.denx.de>
20599 Date: Tue Oct 24 13:55:18 2006 +0200
20601 Fix/workaround broken dependency handling with make 3.81
20602 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
20604 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
20605 Author: Marian Balakowicz <m8@semihalf.com>
20606 Date: Mon Oct 23 22:17:05 2006 +0200
20608 Fix sequoia separate object direcory building problems.
20610 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
20611 Author: Jon Loeliger <jdl@freescale.com>
20612 Date: Fri Oct 20 17:16:35 2006 -0500
20614 Use generic I2C register block on 85xx and 86xx.
20616 Replace private IMMAP I2C structures with generic reg block
20617 and allow 86xx to have multiple I2C device busses.
20619 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20621 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
20622 Author: Jon Loeliger <jdl@freescale.com>
20623 Date: Fri Oct 20 15:54:34 2006 -0500
20625 Fix compilation warnings on a few 85xx boards.
20627 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20629 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
20630 Author: Jon Loeliger <jdl@freescale.com>
20631 Date: Fri Oct 20 15:50:15 2006 -0500
20633 Converted all 85xx boards to use a common FSL I2C driver.
20634 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
20635 And removed hard i2c path from a few u-boot.lds scipts too.
20636 Minor whitespace cleanups along the way.
20638 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20640 commit 4d45f69e362b05892c9e92a7907e5820995612aa
20641 Author: Jon Loeliger <jdl@freescale.com>
20642 Date: Thu Oct 19 12:02:24 2006 -0500
20644 Rewrite a series of goto statements as a sequences of
20645 conditional expressions instead.
20647 Use consistent return code 0/-1 for good/bad indicators.
20649 Include one fewer file if the driver isn't used at all.
20651 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20653 commit 7237c033b02fe295880435f1eb80819a0c987532
20654 Author: Jon Loeliger <jdl@freescale.com>
20655 Date: Thu Oct 19 11:02:16 2006 -0500
20657 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
20659 in an effort to begin to unify the umpteen FSL I2C drivers that
20660 are all otherwise very similar.
20662 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20664 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
20665 Author: Jon Loeliger <jdl@freescale.com>
20666 Date: Thu Oct 19 11:33:52 2006 -0500
20668 * Fix a bunch of compiler warnings for gcc 4.0
20670 Signed-off-by: Matthew McClintock <msm@freescale.com>
20672 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
20673 Author: Stefan Roese <sr@denx.de>
20674 Date: Tue Oct 17 06:14:31 2006 +0200
20676 Add monitor functions for indirect access to PPC440 DCR's
20677 Patch by Leonid Baryudin, 12 Oct 2006
20679 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
20680 Author: Jon Loeliger <jdl@freescale.com>
20681 Date: Fri Oct 13 16:47:53 2006 -0500
20683 Fixed leading whitespace issues.
20684 Removed spurious LAWAR thing.
20686 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20688 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
20689 Author: Jon Loeliger <jdl@freescale.com>
20690 Date: Thu Oct 12 10:42:36 2006 -0500
20692 Remove unneeded include files and local variable.
20694 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20696 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
20697 Author: Grant Likely <grant.likely@secretlab.ca>
20698 Date: Tue Oct 10 00:23:32 2006 -0600
20700 Fix possible uninitialized variable compiler warning.
20702 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
20703 do_bootm_linux() may be uninitialized. There is no possibility in the
20704 current code that len will get used uninitialized, but this fix follows
20705 the existing convention of setting both len and data to zero at the same
20708 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20710 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
20711 Author: Matthew McClintock <msm@freescale.com>
20712 Date: Wed Oct 11 15:13:01 2006 -0500
20714 * Fix a bunch of compiler warnings for gcc 4.0
20716 Signed-off-by: Matthew McClintock <msm@freescale.com>
20718 commit bf651baa365e5447246aad6a633ccd667cf24a39
20719 Author: Jon Loeliger <jdl@freescale.com>
20720 Date: Wed Oct 11 10:10:43 2006 -0500
20722 Move "ar" flags to config.mk to allow for silent "make -s"
20724 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
20725 Author: Jon Loeliger <jdl@freescale.com>
20726 Date: Tue Oct 10 17:19:03 2006 -0500
20728 Coding style changes to remove local varible blocks
20729 and reformat a bit nicer.
20731 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
20732 Author: Jon Loeliger <jdl@freescale.com>
20733 Date: Tue Oct 10 17:16:04 2006 -0500
20735 Fix whitespace issues.
20737 commit 7b382b7125f2397cce63253df62f183e3dfa2770
20738 Author: Jon Loeliger <jdl@freescale.com>
20739 Date: Tue Oct 10 17:14:45 2006 -0500
20741 Fix whitespace issues.
20743 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
20744 Author: Jon Loeliger <jdl@freescale.com>
20745 Date: Tue Oct 10 17:06:53 2006 -0500
20747 Fix whitespace issues.
20749 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
20750 Author: Jon Loeliger <jdl@freescale.com>
20751 Date: Tue Oct 10 17:03:43 2006 -0500
20753 Ran lindent and cleaned up whitespace issues.
20754 Format for 80-columns too.
20756 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
20757 Author: Jon Loeliger <jdl@freescale.com>
20758 Date: Tue Oct 10 17:02:22 2006 -0500
20760 Fix whitespace and 80-col issues.
20762 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
20763 Author: Stefan Roese <sr@denx.de>
20764 Date: Sat Oct 7 11:36:51 2006 +0200
20766 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
20767 Patch by Stefan Roese, 07 Oct 2006
20769 commit 5bc528fa4da751d472397b308137238a6465afd2
20770 Author: Stefan Roese <sr@denx.de>
20771 Date: Sat Oct 7 11:35:25 2006 +0200
20773 Update ALPR code (NAND support working now)
20774 Patch by Stefan Roese, 07 Oct 2006
20776 commit 77d5034847d328753b80c46b83f960a14a26f40e
20777 Author: Stefan Roese <sr@denx.de>
20778 Date: Sat Oct 7 11:33:03 2006 +0200
20780 Remove compile warnings in fpga code
20781 Patch by Stefan Roese, 07 Oct 2006
20783 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
20784 Author: Stefan Roese <sr@denx.de>
20785 Date: Sat Oct 7 11:30:52 2006 +0200
20787 Add CONFIG_BOARD_RESET to configure board specific reset function
20788 Patch by Stefan Roese, 07 Oct 2006
20790 commit f55df18187e7a45cb73fec4370d12135e6691ae1
20791 Author: John Traill <john.traill@freescale.com>
20792 Date: Fri Sep 29 08:23:12 2006 +0100
20794 Fix missing tCycle/modfreq calculation.
20796 Signed-off-by: John Traill <john.traill@freescale.com>
20798 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
20799 Author: Andy Fleming <afleming@freescale.com>
20800 Date: Wed Sep 13 10:33:35 2006 -0500
20802 Updated config headers to add default FDT-based booting
20804 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
20805 Author: Andy Fleming <afleming@freescale.com>
20806 Date: Wed Sep 13 10:34:18 2006 -0500
20808 Add support for eTSEC 3 & 4 on 8548 CDS
20810 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
20811 This will only work on rev 1.3 boards (but doesn't break older boards)
20812 * Cleaned up some comments to reflect the expanded role of tsec
20815 commit 084d648b109c8984f83674043c1a7fa3885ef801
20816 Author: Andy Fleming <afleming@freescale.com>
20817 Date: Wed Sep 13 10:33:56 2006 -0500
20819 Added code to support 2.6.18 PCI changes in u-boot
20821 * Added code to swizzle the IRQ map for the PCI
20823 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
20824 Author: Jon Loeliger <jdl@freescale.com>
20825 Date: Tue Sep 19 09:34:10 2006 -0500
20827 Modified makefile for new build mechanism.
20829 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20831 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
20832 Author: Jon Loeliger <jdl@freescale.com>
20833 Date: Thu Sep 14 08:40:36 2006 -0500
20835 Handle 86xx SVR values according to the new Reference Manual.
20836 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
20837 by the byte in bits 16-23 instead.
20838 Thanks to Jason Jin for noticing.
20840 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20842 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
20843 Author: Zhang Wei <wei.zhang@freescale.com>
20844 Date: Mon Aug 28 14:25:31 2006 +0800
20846 Fixed an OF-tree off-by-one bug when adding a new property name.
20847 This bug will cause the kernel booting to pause a long time.
20849 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
20850 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
20852 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
20853 Author: Jon Loeliger <jdl@freescale.com>
20854 Date: Tue Aug 29 11:05:09 2006 -0500
20856 Remove trailing empty lines.
20858 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
20859 Author: Jon Loeliger <jdl@freescale.com>
20860 Date: Tue Aug 29 09:48:49 2006 -0500
20862 Remove bogus msync and use volatile asm.
20864 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
20865 Author: Jon Loeliger <jdl@freescale.com>
20866 Date: Tue Aug 29 08:17:14 2006 -0500
20868 Add myself as maintainer for MPC8641HPCN.
20870 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
20871 Author: Zhang Wei <wei.zhang@freescale.com>
20872 Date: Mon Aug 28 14:25:31 2006 +0800
20874 Fixed an OF-tree off-by-one bug when adding a new property name.
20875 This bug will cause the kernel booting to pause a long time.
20877 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
20879 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
20880 Author: Haiying Wang <haiying.wang@freescale.com>
20881 Date: Fri Aug 25 14:38:34 2006 -0400
20883 Change ramdiskaddr and dtbaddr
20884 Remove PEX fluff commands.
20886 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
20887 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20889 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
20890 Author: Matthew McClintock <msm@freescale.com>
20891 Date: Wed Aug 23 13:32:45 2006 -0500
20893 * Another small fix for booting with disable_of
20895 Signed-off-by: Matthew McClintock <msm@freescale.com>
20897 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
20898 Author: Jon Loeliger <jdl@freescale.com>
20899 Date: Wed Aug 23 11:04:43 2006 -0500
20901 Cleanup and lindent new AHCI driver.
20903 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
20904 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
20905 Date: Wed Aug 23 19:15:12 2006 +0800
20907 Add AHCI define and sata support for MPC8641HPCN board.
20909 Signed-off-by:Jason Jin<jason.jin@freescale.com>
20911 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
20912 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
20913 Date: Wed Aug 23 19:10:44 2006 +0800
20915 Add AHCI support to u-boot
20917 Add AHCI support in u-boot, enable the sata disk controllers which
20918 following the AHCI protocol.
20920 Signed-off-by:Jason Jin<jason.jin@freescale.com>
20922 commit d8ea2acf5f137cae99417df4f573d036ee384668
20923 Author: Zhang Wei <wei.zhang@freescale.com>
20924 Date: Wed Aug 23 17:54:32 2006 +0800
20926 Add dtb boot-up parameter to default boot commands.
20928 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
20930 commit b93775c2036b99baa390ea425c4771895bbc63c4
20931 Author: Jon Loeliger <jdl@freescale.com>
20932 Date: Tue Aug 22 18:26:08 2006 -0500
20934 Cleanup even more poorly introduced whitespace.
20936 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
20937 Author: Jon Loeliger <jdl@freescale.com>
20938 Date: Tue Aug 22 18:07:00 2006 -0500
20940 Cleanup more poorly introduced whitespace.
20942 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
20943 Author: Jon Loeliger <jdl@freescale.com>
20944 Date: Tue Aug 22 17:54:05 2006 -0500
20946 Cleanup poorly introduced whitespace.
20948 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
20949 Author: Jon Loeliger <jdl@freescale.com>
20950 Date: Tue Aug 22 12:25:27 2006 -0500
20952 General indent and whitespace cleanups.
20954 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
20955 Author: Jon Loeliger <jdl@freescale.com>
20956 Date: Tue Aug 22 12:06:18 2006 -0500
20958 General indent and whitespace cleanups.
20960 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
20961 Author: Jon Loeliger <jdl@freescale.com>
20962 Date: Tue Aug 22 10:42:21 2006 -0500
20964 Cleanup compiler warnings.
20966 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
20967 Author: Matthew McClintock <msm@freescale.com>
20968 Date: Tue Aug 22 09:31:59 2006 -0500
20970 Fix disable_of booting
20972 Signed-off-by: Matthew McClintock <msm@freescale.com>
20974 commit 87a449c8ac396420cb24260f717ea9e6faa82047
20975 Author: Matthew McClintock <msm@freescale.com>
20976 Date: Tue Aug 22 09:23:55 2006 -0500
20978 Support for FDT in uImage format, error when using FDT from flash
20980 Signed-off-by: Matthew McClintock <msm@freescale.com>
20982 commit 75c299c38369d01addd5e054b8a16217b70f4a86
20983 Author: Haiying Wang <haiying.wang@freescale.com>
20984 Date: Tue Aug 15 15:12:55 2006 -0400
20986 Unlock cache before kernel starts up for MPC86xx
20988 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
20989 Author: Haiying Wang <haiying.wang@freescale.com>
20990 Date: Tue Aug 15 15:13:15 2006 -0400
20992 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
20994 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
20995 Author: Haiying Wang <haiying.wang@freescale.com>
20996 Date: Tue Aug 15 15:12:55 2006 -0400
20998 Unlock cache before kernel starts up for MPC86xx
21000 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
21001 Author: Haiying Wang <haiying.wang@freescale.com>
21002 Date: Tue Aug 15 15:13:15 2006 -0400
21004 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
21006 commit 86c8e17f25e972a7e272950a0735fad84e082b88
21007 Author: Matthew McClintock <msm@freescale.com>
21008 Date: Wed Aug 16 13:59:47 2006 -0500
21010 * Fix disable_of booting
21012 Signed-off-by: Matthew McClintock <msm@freescale.com>
21014 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
21015 Author: Matthew McClintock <msm@freescale.com>
21016 Date: Wed Aug 16 10:54:09 2006 -0500
21018 * Support for FDT in uImage format, error when using FDT from flash
21020 Signed-off-by: Matthew McClintock <msm@freescale.com>
21022 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
21023 Author: Stefan Roese <sr@denx.de>
21024 Date: Tue Aug 15 14:22:35 2006 +0200
21026 Add initial support for the ALPR board from Prodrive
21027 NAND needs some additional testing
21028 Patch by Heiko Schocher, 15 Aug 2006
21030 commit f0ff4692ff3372dec55074a8eb444943ab095abb
21031 Author: Stefan Roese <sr@denx.de>
21032 Date: Tue Aug 15 14:15:51 2006 +0200
21034 Add FPGA Altera Cyclone 2 support
21035 Patch by Heiko Schocher, 15 Aug 2006
21037 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
21038 Author: Jon Loeliger <jdl@freescale.com>
21039 Date: Mon Aug 14 15:33:38 2006 -0500
21041 Fix BAT0 to actually be cacheable, non-guarded as documented.
21043 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21045 commit 40bc83559db5745681909fd7382ae509567e116d
21046 Author: Jon Loeliger <jdl@freescale.com>
21047 Date: Wed Aug 9 15:32:16 2006 -0500
21049 Removed MPC8641HPCN DTS source file from build.
21050 It is no longer linked into U-Boot; its sources are
21051 now located in the kernel tree.
21053 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21055 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
21056 Author: Matthew McClintock <msm@freescale.com>
21057 Date: Wed Jun 28 10:47:03 2006 -0500
21059 * Switched default PCI speed for 8540 ADS back to 33MHz
21061 * Added comments and a printf to warn that PCI-X won't
21063 Patch by Andy Fleming 17-Mar-2006
21065 Signed-off-by: Andy Fleming <afleming@freescale.com>
21067 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
21068 Author: Matthew McClintock <msm@freescale.com>
21069 Date: Wed Jun 28 10:46:35 2006 -0500
21071 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
21073 Signed-off-by: Andy Fleming <afleming@freescale.com>
21075 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
21076 Author: Matthew McClintock <msm@freescale.com>
21077 Date: Wed Jun 28 10:46:13 2006 -0500
21079 * Added VIA configuration table
21081 * Added support for PCI2 on CDS
21082 Patch by Andy Fleming 17-Mar-2006
21084 Signed-off-by: Andy Fleming <afleming@freescale.com>
21086 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
21087 Author: Matthew McClintock <msm@freescale.com>
21088 Date: Wed Jun 28 10:45:41 2006 -0500
21090 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
21092 Signed-off-by: Andy Fleming <afleming@freescale.com>
21094 commit 97074ed9655309b64231bc2cee69fe85399f8055
21095 Author: Matthew McClintock <msm@freescale.com>
21096 Date: Wed Jun 28 10:45:17 2006 -0500
21098 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
21100 Signed-off-by: Andy Fleming <afleming@freescale.com>
21102 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
21103 Author: Matthew McClintock <msm@freescale.com>
21104 Date: Wed Jun 28 10:44:49 2006 -0500
21106 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
21108 Signed-off-by: Andy Fleming <afleming@freescale.com>
21110 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
21111 Author: Matthew McClintock <msm@freescale.com>
21112 Date: Wed Jun 28 10:44:23 2006 -0500
21114 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
21116 Signed-off-by: Andy Fleming <afleming@freescale.com>
21118 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
21119 Author: Matthew McClintock <msm@freescale.com>
21120 Date: Wed Jun 28 10:43:36 2006 -0500
21122 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
21124 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21126 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
21127 Author: Matthew McClintock <msm@freescale.com>
21128 Date: Wed Jun 28 10:43:00 2006 -0500
21130 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
21132 commit 5498d90312aad9f6bdbf047986027c35b03cd163
21133 Author: Matthew McClintock <msm@freescale.com>
21134 Date: Wed Jun 28 10:42:24 2006 -0500
21136 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
21138 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
21139 Author: Matthew McClintock <msm@freescale.com>
21140 Date: Wed Jun 28 10:41:37 2006 -0500
21142 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
21144 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
21145 Author: John Traill <john.traill@freescale.com>
21146 Date: Wed Aug 9 14:33:50 2006 +0100
21148 Add Rapidio support for the MPC8641HPCN
21150 Signed-off-by: John Traill <john.traill@freescale.com>
21152 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
21153 Author: John Traill <john.traill@freescale.com>
21154 Date: Tue Aug 8 11:32:43 2006 +0100
21156 Fix caslat calculation
21158 Signed-off-by: John Traill <john.traill@freescale.com>
21160 commit 709d3073e74153278e7904a70819bbef7df50e1a
21161 Author: Jon Loeliger <jdl@freescale.com>
21162 Date: Thu Aug 3 16:17:56 2006 -0500
21164 Convert to mac-address in ethernet nodes.
21166 commit 71748af833ca1017edf1415be376366ff2937d17
21167 Author: Haiying Wang <haiying.wang@freescale.com>
21168 Date: Fri Jul 28 12:41:35 2006 -0400
21170 Correct the irq value of DUART2
21172 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
21173 Author: Haiying Wang <haiying.wang@freescale.com>
21174 Date: Fri Jul 28 12:41:41 2006 -0400
21176 Change the space size of PEX IO in README
21178 commit 239db37c94f7a92941c4465feceb867c609241c5
21179 Author: Haiying Wang <haiying.wang@freescale.com>
21180 Date: Fri Jul 28 12:41:18 2006 -0400
21182 Move get_board_sys_clk to board directory
21184 commit 492900b985439fbce1a118afde1e35def870db03
21185 Author: John Traill <john.traill@freescale.com>
21186 Date: Fri Jul 28 09:03:54 2006 +0100
21188 Fix 8641HPCN pollution
21190 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
21191 Author: John Traill <john.traill@freescale.com>
21192 Date: Fri Jul 28 08:16:06 2006 +0100
21194 Fix 8641HPCN timebase
21196 commit c86360b830f1eecd7a72208575dde4f57879faea
21197 Author: Zhang Wei <wei.zhang@freescale.com>
21198 Date: Fri Jul 28 00:01:34 2006 +0800
21200 Fixed OF device tree of mpc86xxhpcn board.
21202 The changes works in with kernel irq mapping rework.
21204 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
21206 commit bea3f28d285942bf3f7ab339ce85178ded544225
21207 Author: Haiying Wang <haiying.wang@freescale.com>
21208 Date: Wed Jul 12 10:48:05 2006 -0400
21210 Add support for reading and writing mac addresses to or from ID EEPROM.
21212 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
21213 With attached patch, we can use command "mac/mac read/mac save/"
21214 to read and write EEPROM under u-boot prompt.
21216 U-boot will calculate the checksum of EEPROM while bootup,
21217 if it is right, then u-boot will check whether the mac address
21218 of eTSEC0/1/2/3 is availalbe (non-zero).
21220 If there is mac address availabe in EEPROM, u-boot will use it,
21221 otherewise, u-boot will use the mac address defined in
21222 MPC8641HPCN.h. This matches the requirement to set unique mac address
21223 for each TSEC port.
21225 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
21226 Signed-off-by: York Sun <yorksun@freescale.com>
21228 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
21229 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
21230 Date: Thu Jul 13 10:35:10 2006 -0500
21232 Fixed initrd issue by define big RAM
21234 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
21236 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
21237 Author: Jason Jin <Jason.jin@freescale.com>
21238 Date: Fri Jul 7 10:01:45 2006 -0500
21240 We made a u-boot patch to fix the hang up issue
21241 when booting filesystem from ramdisk.
21243 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
21245 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
21246 Author: Matthew McClintock <msm@freescale.com>
21247 Date: Wed Jun 28 10:47:03 2006 -0500
21249 * Switched default PCI speed for 8540 ADS back to 33MHz
21250 * Added comments and a printf to warn that PCI-X won't
21252 Patch by Andy Fleming 17-Mar-2006
21254 Signed-off-by: Andy Fleming <afleming@freescale.com>
21256 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
21257 Author: Matthew McClintock <msm@freescale.com>
21258 Date: Wed Jun 28 10:46:35 2006 -0500
21260 * Fixed a bug where 8555 PCI code used the old variable and
21262 Patch by Andy Fleming 17-Mar-2006
21264 Signed-off-by: Andy Fleming <afleming@freescale.com>
21266 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
21267 Author: Matthew McClintock <msm@freescale.com>
21268 Date: Wed Jun 28 10:46:13 2006 -0500
21270 * Added VIA configuration table
21271 * Added support for PCI2 on CDS
21272 Patch by Andy Fleming 17-Mar-2006
21274 Signed-off-by: Andy Fleming <afleming@freescale.com>
21276 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
21277 Author: Matthew McClintock <msm@freescale.com>
21278 Date: Wed Jun 28 10:45:41 2006 -0500
21280 * Fixed PCI memory definitions
21281 Patch by Andy Fleming 17-Mar-2006
21283 Signed-off-by: Andy Fleming <afleming@freescale.com>
21285 commit 087454609e47295443af793a282cddcd91a5f49c
21286 Author: Matthew McClintock <msm@freescale.com>
21287 Date: Wed Jun 28 10:45:17 2006 -0500
21289 * Added support for initializing second PCI bus on 85xx
21290 Patch by Andy Fleming 17-Mar-2006
21292 Signed-off-by: Andy Fleming <afleming@freescale.com>
21294 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
21295 Author: Matthew McClintock <msm@freescale.com>
21296 Date: Wed Jun 28 10:44:49 2006 -0500
21298 * Added PCI-X #defines for PCI-X initialization
21299 Patch by Andy Fleming on 17-Mar-2006
21301 Signed-off-by: Andy Fleming <afleming@freescale.com>
21303 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
21304 Author: Matthew McClintock <msm@freescale.com>
21305 Date: Wed Jun 28 10:44:23 2006 -0500
21307 * Made sure the code which disables prefetch for PCI devices
21308 sets the size of the prefetch region to 0
21309 Patch by Andy Fleming on 17-Mar-2006
21311 Signed-off-by: Andy Fleming <afleming@freescale.com>
21313 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
21314 Author: Matthew McClintock <msm@freescale.com>
21315 Date: Wed Jun 28 10:43:36 2006 -0500
21317 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
21318 Patch by Jon Loeliger 17-Jan-2006
21320 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21322 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
21323 Author: Matthew McClintock <msm@freescale.com>
21324 Date: Wed Jun 28 10:43:00 2006 -0500
21326 * Removed the oftree.dts for stxxtx in light of the changes
21327 to the flat device tree handling code
21328 Patch by Matthew McClintock 26-June-2006
21330 commit 1b380ec225665e73959677f3893dc658c5925e05
21331 Author: Matthew McClintock <msm@freescale.com>
21332 Date: Wed Jun 28 10:42:24 2006 -0500
21334 * Patch to modify ft_build.c to update flat device trees in place
21335 Patch by Matthew McClintock 26-June-2006
21337 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
21338 Author: Matthew McClintock <msm@freescale.com>
21339 Date: Wed Jun 28 10:41:37 2006 -0500
21341 * Modify bootm command to support booting with flat device trees
21342 Patch by Matthew McClintock 26-June-2006
21344 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
21345 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
21346 Date: Wed Jun 28 08:43:56 2006 -0500
21348 Change Id to symbolic name for RTL8139
21350 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
21352 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
21353 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
21354 Date: Tue Jun 27 18:12:10 2006 +0800
21356 Fix RTL8139 in big endian
21358 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
21359 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
21361 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
21362 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
21363 Date: Tue Jun 27 18:12:23 2006 +0800
21365 Fix Tsec bug when no link
21367 When tftp a non-exist file from the tftp server, u-boot will check
21368 the link of all eth port. The original file will return wrong link
21369 state on the no link ports.
21371 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
21373 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
21374 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
21375 Date: Tue Jun 27 18:12:02 2006 +0800
21377 Fix bug for io_bar size during pci scan
21379 During the pci scan process, Some devices return bar_reponse with the
21380 highest bytes 0, such as the pci bridge in uli1575 return bar_response
21381 with 0xffffff, So the bar_size should be manually set under 64K.
21383 Signed-off-by: Jason Jin <jason.jin@freescale.com>
21385 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
21386 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
21387 Date: Tue Jun 27 18:11:54 2006 +0800
21389 Enable PCIE1 for MPC8641HPCN board
21391 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
21393 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
21394 Author: Wolfgang Denk <wd@pollux.denx.de>
21395 Date: Mon Jun 26 11:06:00 2006 +0200
21399 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
21400 Author: Jon Loeliger <jdl@freescale.com>
21401 Date: Thu Jun 22 08:51:46 2006 -0500
21403 Fix bug in 8641hpcn reset command with no args.
21405 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
21406 Acked-by: Jon Loeliger <jdl@freescale.com>
21408 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
21409 Author: Zhang Wei <wei.zhang@freescale.com>
21410 Date: Tue Jun 20 17:47:15 2006 +0800
21412 Reworked IRQ mapping in OF-tree.
21414 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
21415 Author: Jon Loeliger <jdl@freescale.com>
21416 Date: Thu Jun 15 21:33:37 2006 -0500
21418 Do not enable address translation on secondary CPUs.
21419 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
21421 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21423 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
21424 Author: Wolfgang Denk <wd@pollux.denx.de>
21425 Date: Wed Jun 14 18:14:56 2006 +0200
21429 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
21430 Author: Wolfgang Denk <wd@pollux.denx.de>
21431 Date: Wed Jun 14 17:45:53 2006 +0200
21433 Various USB related patches
21434 - Add support for mpc8xx USB device.
21435 - Add support for Common Device Class - Abstract Control Model USB console.
21436 - Add support for flow control in USB slave devices.
21437 - Add support for switching between gserial and cdc_acm using environment.
21438 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
21439 - Update usbcore slightly to ease host enumeration.
21440 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
21441 - Add AdderUSB_config as a defconfig to enable usage of the USB console
21442 by default with the Adder87x U-Boot port.
21443 Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
21445 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
21446 Author: Jon Loeliger <jdl@jdl.com>
21447 Date: Wed Jun 7 10:53:55 2006 -0500
21449 Fix a get_board_sys_clk() use-before-def warning.
21451 Signed-off-by: Jon Loeliger <jdl@jdl.com>
21453 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
21454 Author: Jon Loeliger <jdl@jdl.com>
21455 Date: Wed Jun 7 10:52:49 2006 -0500
21457 Allow DTC path to be passed in.
21459 Signed-off-by: Jon Loeliger <jdl@jdl.com>
21461 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
21462 Author: Haiying Wang <haiying.wang@freescale.com>
21463 Date: Tue Jun 6 16:54:29 2006 -0400
21465 Modify the IRQ of DUART2
21467 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
21468 Author: Jon Loeliger <jdl@jdl.com>
21469 Date: Wed May 31 13:55:35 2006 -0500
21473 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21475 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
21476 Author: Jon Loeliger <jdl@jdl.com>
21477 Date: Wed May 31 12:44:44 2006 -0500
21479 White space cleanup.
21480 Some 80-column cleanups.
21481 Convert printf() to puts() where possible.
21482 Use #include "spd_sdram.h" as needed.
21483 Enhanced reset command usage message a bit.
21485 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21487 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
21488 Author: Jon Loeliger <jdl@jdl.com>
21489 Date: Wed May 31 11:39:34 2006 -0500
21491 Removed unneeded local_bus_init() from 8641HPCN board.
21493 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21495 commit 4d3d729c16c392d2982d3266b659d333c927697d
21496 Author: Jon Loeliger <jdl@jdl.com>
21497 Date: Wed May 31 11:24:28 2006 -0500
21499 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
21501 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21503 commit b2a941de060350ad15878d8219825f4950e9bb8e
21504 Author: Jon Loeliger <jdl@jdl.com>
21505 Date: Wed May 31 10:07:28 2006 -0500
21507 Remove dead debug code.
21509 Signed-off-by: Jon Loeliger <jdl@jdl.com>
21511 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
21512 Author: Jon Loeliger <jdl@freescale.com>
21513 Date: Tue May 30 17:47:00 2006 -0500
21515 Move mpc86xx PIXIS code to board directory
21517 First cut at moving the PIXIS platform code out of
21518 the 86xx cpu directory and into board/mpc8641hpcn
21521 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21523 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
21524 Author: Markus Klotzbuecher <mk@denx.de>
21525 Date: Tue May 30 16:56:14 2006 +0200
21527 Support generic OHCI support for the s3c24x0 cpu.
21529 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
21530 Author: Haiying Wang <Haiying.Wang@freescale.com>
21531 Date: Tue May 30 09:10:32 2006 -0500
21533 Improve "reset" command's interaction with watchdog.
21535 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
21536 "reset altbank wd" will reset another bank WITH watch dog enabled
21537 "diswd" will disable watch dog after u-boot boots up successfully
21539 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
21541 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
21542 Author: Haiying Wang <Haiying.Wang@freescale.com>
21543 Date: Tue May 30 08:51:19 2006 -0500
21545 Fix two SDRAM setup bugs.
21548 Enable 1T/2T based on number of DIMMs present.
21550 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
21552 commit d11fec5015334deb2010e36ce00bb118cc5429a5
21553 Author: Haiying Wang <Haiying.Wang@freescale.com>
21554 Date: Fri May 26 10:24:48 2006 -0500
21556 Add first draft of the MPC8641HPCN doc/README.
21558 Signed-off-by: Jon Loeliger <jdl@jdl.com>
21560 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
21561 Author: Haiying Wang <Haiying.Wang@freescale.com>
21562 Date: Fri May 26 10:13:04 2006 -0500
21564 Added pci@8000 block.
21565 Updated ethernet interrupt mappings (moved up 48).
21566 Cleaned up a few comments.
21568 Signed-off-by: Jon Loeliger <jdl@jdl.com>
21570 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
21571 Author: Haiying Wang <Haiying.Wang@freescale.com>
21572 Date: Fri May 26 10:01:16 2006 -0500
21574 Allow args on reset command.
21576 Signed-off-by: Jon Loeliger <jdl@jdl.com>
21578 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
21579 Author: Markus Klotzbuecher <mk@denx.de>
21580 Date: Tue May 23 13:38:35 2006 +0200
21582 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
21583 fixes to the latter.
21585 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
21586 Author: Markus Klotzbuecher <mk@denx.de>
21587 Date: Tue May 23 10:33:11 2006 +0200
21589 More cleanup for the delta board and the generic usb_ohci driver. Added
21590 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
21591 initialization and cleanup hooks respectively.
21593 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
21594 Author: Markus Klotzbuecher <mk@denx.de>
21595 Date: Mon May 22 16:33:54 2006 +0200
21597 This patch adds USB storage support for the delta board. This is the first
21598 board to make use of a generic OHCI driver, that calls hooks for board
21599 dependant initialization.
21601 commit 14e37081ff3cac7ebe6e93836523429853b6b292
21602 Author: Jon Loeliger <jdl@jdl.com>
21603 Date: Fri May 19 13:28:39 2006 -0500
21605 Change arbitration to round-robin for SMP linux.
21607 commit 9a655876e5995be80f49054e2509500e871e4d3a
21608 Author: Jon Loeliger <jdl@jdl.com>
21609 Date: Fri May 19 13:26:34 2006 -0500
21611 Enable dual DDR controllers and interleaving.
21613 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
21614 Author: Jon Loeliger <jdl@jdl.com>
21615 Date: Fri May 19 13:22:44 2006 -0500
21617 Update 86xx address map and LAWBARs.
21619 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
21620 Author: Jon Loeliger <jdl@jdl.com>
21621 Date: Fri May 19 13:14:15 2006 -0500
21623 Remove L2 Cache invalidate polling.
21625 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
21626 Author: Jon Loeliger <jdl@jdl.com>
21627 Date: Fri May 19 12:33:09 2006 -0500
21629 Enable 2nd CPU and I2C.
21631 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
21632 Author: Jon Loeliger <jdl@freescale.com>
21633 Date: Mon May 15 07:26:56 2006 -0500
21635 Update interrupt mapping.
21637 commit 6cfea33477b04b63ed47386ed1629529484c33ba
21638 Author: Haiying Wang <Haiying.Wang@freescale.com>
21639 Date: Wed May 10 09:38:06 2006 -0500
21641 Remove unneeded INIT_RAM_LOCK cache twiddling.
21642 Correctly tracks r29 as global data pointer now.
21644 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
21646 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
21647 Author: Jon Loeliger <jdl@freescale.com>
21648 Date: Wed May 10 09:33:07 2006 -0500
21650 Remove unnecessary flash.c file.
21652 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
21653 Author: Jon Loeliger <jdl@freescale.com>
21654 Date: Tue May 9 08:23:49 2006 -0500
21656 Get MPC8641HPCN flash images working.
21658 Enable the CFI driver.
21659 Remove bogus LAWBAR7 cruft.
21660 Use correct TEXT_BASE, Fixup load script.
21661 Enable SPD EEPROM during DDR setup.
21662 Use generic RFC 1918 IP addresses by default.
21664 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
21665 Author: Jon Loeliger <jdl@freescale.com>
21666 Date: Thu Apr 27 10:15:16 2006 -0500
21668 Cleanup whitespaces and style issues.
21669 Removed //-style comments.
21670 Use 80-column lines.
21671 Remove trailing whitespace.
21672 Remove dead code and debug cruft.
21674 commit a2320a6bf8113a09544c42d160d10ac69d049a03
21675 Author: Jon Loeliger <jdl@freescale.com>
21676 Date: Thu Apr 27 08:22:39 2006 -0500
21678 Revert bad PCI prefetch limit change.
21680 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
21681 Author: Jon Loeliger <jdl@freescale.com>
21682 Date: Wed Apr 26 17:58:56 2006 -0500
21684 Initial support for MPC8641 HPCN board.