pandora-kernel.git
11 years agoMerge branch 'tsc2005' into next
Dmitry Torokhov [Thu, 17 Mar 2011 06:29:56 +0000 (23:29 -0700)]
Merge branch 'tsc2005' into next

11 years agoInput: tsc2005 - remove 'disable' sysfs attribute
Dmitry Torokhov [Thu, 17 Mar 2011 05:11:41 +0000 (22:11 -0700)]
Input: tsc2005 - remove 'disable' sysfs attribute

I believe that enable/disable functionality should not be implemented on
the individual driver level but rather in device core, potentially
reusing parts of PM framework. Therefore the driver-specific "disable"
attribute is removed from the mainline driver.

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tsc2005 - add open/close
Dmitry Torokhov [Thu, 17 Mar 2011 05:11:34 +0000 (22:11 -0700)]
Input: tsc2005 - add open/close

Introduce open and close methods for the input device to keep the device
powered down when it is not in use. Also rework interaction between
interrupt thread and starting/shutting off/resetting the device: instead
of taking a mutex in the intterrupt thread and elsewhere disable interrupts
before transitioning the device in a new state.

The ESD handling is also separated from the IRQ thread; we poll regularly
at a given interval and simply skip reads if we see that valid interrupt
happened not so long ago. This allows us not cancel and reschedule ESD
work from interrupt context all the time.

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tsc2005 - handle read errors from SPI layer
Dmitry Torokhov [Thu, 17 Mar 2011 05:11:25 +0000 (22:11 -0700)]
Input: tsc2005 - handle read errors from SPI layer

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tsc2005 - do not rearm timer in hardirq handler
Dmitry Torokhov [Thu, 17 Mar 2011 05:11:14 +0000 (22:11 -0700)]
Input: tsc2005 - do not rearm timer in hardirq handler

We will most likely rearm it yet again the IRQ thread so doing it here
is pointless.

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tsc2005 - don't use work for 'pen up' handling
Dmitry Torokhov [Thu, 17 Mar 2011 05:11:08 +0000 (22:11 -0700)]
Input: tsc2005 - don't use work for 'pen up' handling

We do not need process context to send input events so let's switch to
a regular timer. I am going to get rid of taking ts->mutex in
tsc2005_irq_thread() later.

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tsc2005 - do not use 0 in place of NULL
Dmitry Torokhov [Thu, 17 Mar 2011 05:10:52 +0000 (22:10 -0700)]
Input: tsc2005 - do not use 0 in place of NULL

Sparse in unhappy when people use 0 instead of NULL for pointers so
let's rework the way we initialize spi_transfer structure in
tsc2005_cmd() and tsc2005_write().

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tsc2005 - use true/false for boolean variables
Dmitry Torokhov [Thu, 17 Mar 2011 05:10:46 +0000 (22:10 -0700)]
Input: tsc2005 - use true/false for boolean variables

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tsc2005 - hide selftest attribute if we can't reset
Dmitry Torokhov [Thu, 17 Mar 2011 05:10:37 +0000 (22:10 -0700)]
Input: tsc2005 - hide selftest attribute if we can't reset

If implementation to perform self-test/reset has not been provided by the
platform code hide 'selftest' sysfs attribute instead of returning error
when someone tries to use it.

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tsc2005 - rework driver initialization code
Dmitry Torokhov [Thu, 17 Mar 2011 05:09:38 +0000 (22:09 -0700)]
Input: tsc2005 - rework driver initialization code

We need to make sure we have time/work initialized before requesting and
enabling interrupts, otherwise we might start using them way too early.

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tsc2005 - set up bus type in input device
Dmitry Torokhov [Thu, 17 Mar 2011 05:09:32 +0000 (22:09 -0700)]
Input: tsc2005 - set up bus type in input device

We know what bus we are residing on (SPI) so let's make this data
available to the users.

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tsc2005 - set up parent device
Dmitry Torokhov [Thu, 17 Mar 2011 05:09:25 +0000 (22:09 -0700)]
Input: tsc2005 - set up parent device

Set up SPI device as parent of the input device so it gets placed into
proper place in sysfs tree.

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tsc2005 - clear driver data after unbinding
Dmitry Torokhov [Thu, 17 Mar 2011 05:09:09 +0000 (22:09 -0700)]
Input: tsc2005 - clear driver data after unbinding

We should not leave garbage pointers in driver structure after we unbind
it from the device or if bind fails.

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tsc2005 - add module description
Dmitry Torokhov [Thu, 17 Mar 2011 05:09:03 +0000 (22:09 -0700)]
Input: tsc2005 - add module description

Add proper module description so that it would show in 'modinfo'
output.

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tsc2005 - remove driver banner message
Dmitry Torokhov [Thu, 17 Mar 2011 05:08:53 +0000 (22:08 -0700)]
Input: tsc2005 - remove driver banner message

The boot process is noisy as it is and input core already announces
all new device so let's get rid of the banner message in the driver.

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tsc2005 - remove incorrect module alias
Dmitry Torokhov [Thu, 17 Mar 2011 05:08:39 +0000 (22:08 -0700)]
Input: tsc2005 - remove incorrect module alias

TSC2005 is not a platform driver so it should not define "platform:tsc2005"
module alias.

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tsc2005 - convert to using dev_pm_ops
Dmitry Torokhov [Thu, 17 Mar 2011 05:08:26 +0000 (22:08 -0700)]
Input: tsc2005 - convert to using dev_pm_ops

Newer code should not be using legacy suspend/resume methods but
rather supply dev_pm_ops structure as it allows better control
over power management.

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tsc2005 - use spi_get/set_drvdata()
Dmitry Torokhov [Thu, 17 Mar 2011 05:08:08 +0000 (22:08 -0700)]
Input: tsc2005 - use spi_get/set_drvdata()

Instead of peeking into underlying device and using dev_get/set_drvdata(),
let's use SPI layer's implementation to access driver-private data
(which may be different from driver-core private data).

Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: introduce tsc2005 driver
Lauri Leukkunen [Thu, 17 Mar 2011 05:07:36 +0000 (22:07 -0700)]
Input: introduce tsc2005 driver

Discussions:

http://www.mail-archive.com/linux-omap@vger.kernel.org/msg26748.html

Introduce a driver for the Texas Instruments TSC2005 touchscreen
controller (http://focus.ti.com/docs/prod/folders/print/tsc2005.html).

The patch is based on a driver by Lauri Leukkunen, with modifications
by David Brownell, Phil Carmody, Imre Deak, Hiroshi DOYU, Ari Kauppi,
Tony Lindgren, Jarkko Nikula, Eero Nurkkala and Roman Tereshonkov.

Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com>
[aaro.koskinen@nokia.com: patch description, rebasing & cleanup]
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
[ext-srikar.1.bhavanarayana@nokia.com: various fixes]
Signed-off-by: Srikar <ext-srikar.1.bhavanarayana@nokia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: xen-kbdfront - move to drivers/input/misc
Dmitry Torokhov [Thu, 17 Mar 2011 05:56:03 +0000 (22:56 -0700)]
Input: xen-kbdfront - move to drivers/input/misc

drivers/input is reserved for input core code and input handlers with
drivers belonging to one of the sub-directories.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: xen-kbdfront - add grant reference for shared page
Daniel De Graaf [Thu, 17 Mar 2011 05:52:42 +0000 (22:52 -0700)]
Input: xen-kbdfront - add grant reference for shared page

Without a grant reference, full access to the domain's memory is
required to use the shared page. Add an additional parameter in
xenstore to allow grant mapping to be used.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <Ian.Campbell@eu.citrix.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: xen-kbdfront - advertise either absolute or relative coordinates
Olaf Hering [Thu, 17 Mar 2011 05:11:46 +0000 (22:11 -0700)]
Input: xen-kbdfront - advertise either absolute or relative coordinates

A virtualized display device is usually viewed with the vncviewer
application, either by 'xm vnc domU' or with vncviewer localhost:port.
vncviewer and the RFB protocol provides absolute coordinates to the
virtual display. These coordinates are either passed through to a PV
guest or converted to relative coordinates for a HVM guest.

A PV guest receives these coordinates and passes them to the kernels
evdev driver. There it can be picked up by applications such as the
xorg-input drivers. Using absolute coordinates avoids issues such as
guest mouse pointer not tracking host mouse pointer due to wrong mouse
acceleration settings in the guests X display.

Advertise either absolute or relative coordinates to the input system
and the evdev driver, depending on what dom0 provides. The xorg-input
driver prefers relative coordinates even if a devices provides both.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tc3589x-keypad - fix 'double const' warning
Dmitry Torokhov [Wed, 16 Mar 2011 06:18:00 +0000 (23:18 -0700)]
Input: tc3589x-keypad - fix 'double const' warning

Also rearrange driver structure initializer a bit.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tca6416-keypad - suspend/resume wakeup support
Magnus Damm [Wed, 16 Mar 2011 05:32:39 +0000 (22:32 -0700)]
Input: tca6416-keypad - suspend/resume wakeup support

Extend the tca6416 driver to use enable_irq_wake() and disable_irq_wake()
in the suspend/resume hooks.

This makes it possible to wake up from suspend-to-ram using a tca6416 key
on the sh7372 mackerel board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: atmel_mxt_ts - add objects of mXT1386 chip
Joonyoung Shim [Tue, 15 Mar 2011 04:41:40 +0000 (21:41 -0700)]
Input: atmel_mxt_ts - add objects of mXT1386 chip

Atmel mXT1386 chip is operated by atmel_mxt_ts driver and it has some
different objects.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: atmel_mxt_ts - remove firmware version check
Joonyoung Shim [Tue, 15 Mar 2011 04:41:34 +0000 (21:41 -0700)]
Input: atmel_mxt_ts - remove firmware version check

Atmel touchscreen chips have different firmware version with each chip,
so we cannot distinguish attribute of chip by firmware version.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: wm831x-ts - ensure the controller is in a known state on open
Mark Brown [Tue, 15 Mar 2011 04:39:09 +0000 (21:39 -0700)]
Input: wm831x-ts - ensure the controller is in a known state on open

Explicitly set all the enable bits when opening the device just in case
something left the device in an unexpected state.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: add Atmel AT42QT1070 keypad driver
Bo Shen [Mon, 14 Mar 2011 06:34:59 +0000 (23:34 -0700)]
Input: add Atmel AT42QT1070 keypad driver

The AT42QT1070 QTouch sensor supports up to 7 keys.

The driver has been tested on Atmel AT91SAM9M10-G45-EK board, and it
 should work fine on other platforms.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: wm831x-ts - default pressure measurements on
Mark Brown [Sun, 13 Mar 2011 04:48:34 +0000 (20:48 -0800)]
Input: wm831x-ts - default pressure measurements on

tslib expects pressure measurements so enable them by default for better
compatibility.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: bcm5974 - add support for MacBookPro8
Andy Botting [Sun, 13 Mar 2011 04:27:22 +0000 (20:27 -0800)]
Input: bcm5974 - add support for MacBookPro8

This patch add multitouch support for the MacBookPro8,1 and
MacBookPro8,2 models.

Cc: stable@kernel.org
Signed-off-by: Andy Botting <andy@andybotting.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: wacom - support 2FGT in MT format
Ping Cheng [Sun, 13 Mar 2011 04:35:18 +0000 (20:35 -0800)]
Input: wacom - support 2FGT in MT format

Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: wacom - support one finger touch the touchscreen way
Ping Cheng [Sun, 13 Mar 2011 04:34:42 +0000 (20:34 -0800)]
Input: wacom - support one finger touch the touchscreen way

There are two types of 1FGT devices supported in wacom_wac.c.
Changing them to follow the existing touchscreen format, i.e.,
only report BTN_TOUCH as a valid tool type.

Touch data will be ignored if pen is in proximity. This requires
a touch up event sent if touch was down when pen comes in. The
touch up event should be sent before any pen events are emitted.
Otherwise, two pointers would race for the cursor.

However, we can not send a touch up inside wacom_tpc_pen since
pen and touch are on different logical port. That is why we
have to check if touch is up before sending pen events.

Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: wacom - process pen data in its own routine
Ping Cheng [Sun, 13 Mar 2011 04:34:11 +0000 (20:34 -0800)]
Input: wacom - process pen data in its own routine

So it would be easier for patch reviewers to follow the data path.

Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: wacom - do not send 2FGT Tablet PC events in TAP format
Ping Cheng [Sun, 13 Mar 2011 04:33:33 +0000 (20:33 -0800)]
Input: wacom - do not send 2FGT Tablet PC events in TAP format

2FGT Tablet PC touch events were processed in _TAP_ format. Remove
them so we can change to _MT_ format.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: atmel_mxt_ts - remove matrix size check
Iiro Valkonen [Thu, 24 Feb 2011 05:07:20 +0000 (21:07 -0800)]
Input: atmel_mxt_ts - remove matrix size check

The mxt_check_matrix_size() is currently setting the CTE mode to match
xline/yline information that is in the platform data, but it does not
take into account for example the fact that we could have a key array
in use too (key array would use some x/y lines as well).

It would be better to simply rely on the configuration data, and make
sure that the CTE mode set in there matches the touch object (touchscreen,
key array, proximity) configuration (which are set in the config data too).

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: mcs_touchkey - add shutdown handler
HeungJun Kim [Thu, 24 Feb 2011 05:42:49 +0000 (21:42 -0800)]
Input: mcs_touchkey - add shutdown handler

The MCS50XX series has a HW bug that requires explicit chip power down.
If chip is not powered down before shutting the system down the control
pins (powerup, interrupt) are pulled up and residue current continues
flowing into the chips making them continue consuming power.

Signed-off-by: Heungjun Kim <riverful.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: mcs_touchkey - add support for suspend/resume
Heungjun Kim [Thu, 24 Feb 2011 05:40:11 +0000 (21:40 -0800)]
Input: mcs_touchkey - add support for suspend/resume

This adds support for system-level suspend/resume to the driver.

Signed-off-by: Heungjun Kim <riverful.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: omap4-keypad - wire up runtime PM handling
Abraham Arce [Wed, 23 Feb 2011 06:25:59 +0000 (22:25 -0800)]
Input: omap4-keypad - wire up runtime PM handling

Enable Runtime PM functionality in OMAP4 driver based on the following
assumptions:

- keyboard controller in wakeup domain so it is always on and power
  impact is minimal;
- in OMAP4 the device control is at module/device level and ick/fclk
  level control is difficult so cutting of clocks will prevent
  interrupts.

Signed-off-by: Abraham Arce <x0066660@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: uinput - reversed test in uinput_setup_device()
Dan Carpenter [Fri, 18 Feb 2011 16:30:52 +0000 (08:30 -0800)]
Input: uinput - reversed test in uinput_setup_device()

The test here is reversed. It should be if (IS_ERR()) instead of
if (!IS_ERR()).

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: atmel_mxt_ts - allow board code to specify IRQ flags
Iiro Valkonen [Tue, 15 Feb 2011 21:36:52 +0000 (13:36 -0800)]
Input: atmel_mxt_ts - allow board code to specify IRQ flags

Different board have different requirements/setups so let's be more
flexible.

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: atmel_mxt_ts - allow board code to suppliy controller config
Iiro Valkonen [Tue, 15 Feb 2011 21:36:52 +0000 (13:36 -0800)]
Input: atmel_mxt_ts - allow board code to suppliy controller config

As there is no common configuration settings that would work in every
situation, remove the fixed config data from driver code and add
config data to platform data.

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: atmel_mxt_ts - add mXT224 identifier to id_table
Chris Leech [Tue, 15 Feb 2011 21:36:52 +0000 (13:36 -0800)]
Input: atmel_mxt_ts - add mXT224 identifier to id_table

"mXT224" is used in the Intel mid firmware in SFI tables to identify the
presence of this I2C device.

Signed-off-by: Chris Leech <christopher.leech@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: synaptics_i2c - convert to dev_pm_ops
Mark Brown [Fri, 11 Feb 2011 16:53:33 +0000 (08:53 -0800)]
Input: synaptics_i2c - convert to dev_pm_ops

There is a general move to convert drivers to dev_pm_ops rather than bus
specific PM ops in order to facilitate core development. Do this converison
for synaptics-i2c.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: adxl34x - fix references to adx134x
Mark Brown [Fri, 11 Feb 2011 16:53:04 +0000 (08:53 -0800)]
Input: adxl34x - fix references to adx134x

The adxl34x SPI driver has what appears to be a typo referring to the
device as adx134x with the numeral 1 rather than letter l. This appears
to be an error so convert.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: adxl34x-spi - convert to dev_pm_ops
Mark Brown [Fri, 11 Feb 2011 17:22:40 +0000 (09:22 -0800)]
Input: adxl34x-spi - convert to dev_pm_ops

There is a general move to convert drivers to use dev_pm_ops rather than
bus specific ones in order to facilitate core development. Do this
conversion for adxl34x-spi.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: adxl34x-i2c - convert to dev_pm_ops
Mark Brown [Fri, 11 Feb 2011 16:51:52 +0000 (08:51 -0800)]
Input: adxl34x-i2c - convert to dev_pm_ops

There is a general move to convert drivers to use dev_pm_ops rather than
bus specific ones in order to facilitate core development. Do this
conversion for adxl34x-i2c.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: max7359 - convert to dev_pm_ops
Mark Brown [Fri, 11 Feb 2011 16:51:13 +0000 (08:51 -0800)]
Input: max7359 - convert to dev_pm_ops

There is a general move to convert drivers to use dev_pm_ops rather than
bus specific ops to facilitate core work. Do this conversion for max7359.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: lm8323 - convert to dev_pm_ops
Mark Brown [Fri, 11 Feb 2011 16:50:37 +0000 (08:50 -0800)]
Input: lm8323 - convert to dev_pm_ops

There is a general move away from bus specific PM operations to using
dev_pm_ops in order to facilicate core improvements. Update lm8323 to
the new model.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: ad714x-spi - convert to dev_pm_ops
Mark Brown [Fri, 11 Feb 2011 16:49:37 +0000 (08:49 -0800)]
Input: ad714x-spi - convert to dev_pm_ops

There is a general move to convert drivers to use dev_pm_ops rather than
bus specific PM operations in order to facilitate core work. Do this
conversion for ad714x-spi.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: ad714x-i2c - convert to dev_pm_ops
Mark Brown [Fri, 11 Feb 2011 16:49:05 +0000 (08:49 -0800)]
Input: ad714x-i2c - convert to dev_pm_ops

There is a general move to convert drivers to use dev_pm_ops rather than
bus specific PM operations in order to facilitate core work. Do this
conversion for ad714x-i2c.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: uinput - use memdup_user() and friends
Dmitry Torokhov [Fri, 11 Feb 2011 09:10:45 +0000 (01:10 -0800)]
Input: uinput - use memdup_user() and friends

Instead of open-coding copying of data structures from userspace use
memdup_user() and strndup_user(). Note that this introduces change in
behavior because driver used to truncate 'phys' longer than 1024 bytes,
but now it will refuse to set 'phys' that long. Arguably trying to set
such 'phys' is suspect anyways.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: uinput - fix setting up device name
David Herrmann [Fri, 11 Feb 2011 09:10:44 +0000 (01:10 -0800)]
Input: uinput - fix setting up device name

The check for non-empty device name was botched since we tried to account
for extra space for the terminating zero at the same time. Convert to
kstrndup() to avoid this problem.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Aristeu Rozanski <aris@ruivo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: atmel_mxt_ts - read whole message to make CHG low
Iiro Valkonen [Fri, 4 Feb 2011 08:51:05 +0000 (00:51 -0800)]
Input: atmel_mxt_ts - read whole message to make CHG low

Read the whole message, as reading just the first byte isn't always
guaranteed to clear the message.

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: atmel_mxt_ts - get rid of qt602240 prefixes in names
Iiro Valkonen [Thu, 3 Feb 2011 07:21:58 +0000 (23:21 -0800)]
Input: atmel_mxt_ts - get rid of qt602240 prefixes in names

Change prefixes from qt602240 to mxt to reflect that the driver supports
whole line of mXT touchscreens.

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: qt602240_ts - rename to atmel_mxt_ts
Dmitry Torokhov [Thu, 3 Feb 2011 07:21:58 +0000 (23:21 -0800)]
Input: qt602240_ts - rename to atmel_mxt_ts

Since the driver will be supporting whole range of Atmels mXT touchscreen
controllers we better rename it to atmel_mxt_ts.

Acked-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: input-polldev - fix a couple of typos
Dmitry Torokhov [Tue, 1 Feb 2011 05:06:34 +0000 (21:06 -0800)]
Input: input-polldev - fix a couple of typos

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: switch completely over to the new versions of get/setkeycode
Dmitry Torokhov [Tue, 1 Feb 2011 05:06:39 +0000 (21:06 -0800)]
Input: switch completely over to the new versions of get/setkeycode

All users of old style get/setkeycode methids have been converted so
it is time to retire them.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: dvb-usb-remote - convert to new style of get/setkeycode
Dmitry Torokhov [Tue, 1 Feb 2011 05:06:39 +0000 (21:06 -0800)]
Input: dvb-usb-remote - convert to new style of get/setkeycode

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoMerge commit 'v2.6.38-rc3' into next
Dmitry Torokhov [Tue, 1 Feb 2011 05:16:22 +0000 (21:16 -0800)]
Merge commit 'v2.6.38-rc3' into next

11 years agoInput: wm831x-ts - remove use of ternary operator
Mark Brown [Tue, 1 Feb 2011 05:09:25 +0000 (21:09 -0800)]
Input: wm831x-ts - remove use of ternary operator

While being applied the driver was modified to add use of the ternary
operator. Write the conditionals out longhand as I find it terribly
unhelpful for legibility.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoLinux 2.6.38-rc3 v2.6.38-rc3
Linus Torvalds [Tue, 1 Feb 2011 03:05:49 +0000 (13:05 +1000)]
Linux 2.6.38-rc3

11 years agoMerge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Mon, 31 Jan 2011 23:41:02 +0000 (09:41 +1000)]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: NFSv4 readdir loses entries
  NFS: Micro-optimize nfs4_decode_dirent()
  NFS: Fix an NFS client lockdep issue
  NFS construct consistent co_ownerid for v4.1
  NFS: nfs_wcc_update_inode() should set nfsi->attr_gencount
  NFS improve pnfs_put_deviceid_cache debug print
  NFS fix cb_sequence error processing
  NFS do not find client in NFSv4 pg_authenticate
  NLM: Fix "kernel BUG at fs/lockd/host.c:417!" or ".../host.c:283!"
  NFS: Prevent memory allocation failure in nfsacl_encode()
  NFS: nfsacl_{encode,decode} should return signed integer
  NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!"
  NFS: Fix "kernel BUG at fs/aio.c:554!"
  NFS4: Avoid potential NULL pointer dereference in decode_and_add_ds().
  NFS: fix handling of malloc failure during nfs_flush_multi()

11 years agoMerge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 31 Jan 2011 22:30:31 +0000 (08:30 +1000)]
Merge branch 'fixes' of /home/rmk/linux-2.6-arm

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: smp_on_up: allow non-ARM SMP processors
  ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+
  ARM: initrd: disable initrd if passed address overlaps reserved region
  ARM: footbridge: fix debug macros
  ARM: mmci: round down the bytes transferred on error
  ARM: mmci: complete the transaction on error
  ARM: 6642/1: mmci: calculate remaining bytes at error correctly

11 years agoMerge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 31 Jan 2011 22:27:55 +0000 (08:27 +1000)]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR
  arm: omap2: mux: fix compile warning
  omap1: Simplify use of omap_irq_flags
  omap2+: Fix unused variable warning for omap_irq_base

11 years agokernel.h: fix kernel-doc warning
Randy Dunlap [Mon, 31 Jan 2011 17:29:14 +0000 (09:29 -0800)]
kernel.h: fix kernel-doc warning

Fix kernel-doc warning in kernel.h from commit 7ef88ad56145
("BUILD_BUG_ON: make it handle more cases"):

  Warning(include/linux/kernel.h:605): No description found for parameter 'condition'
  Warning(include/linux/kernel.h:605): Excess function parameter 'cond' description in 'BUILD_BUG_ON'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Linus Torvalds [Mon, 31 Jan 2011 22:15:40 +0000 (08:15 +1000)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: xfs_bmap_add_extent_delay_real should init br_startblock
  xfs: fix dquot shaker deadlock
  xfs: handle CIl transaction commit failures correctly
  xfs: limit extsize to size of AGs and/or MAXEXTLEN
  xfs: prevent extsize alignment from exceeding maximum extent size
  xfs: limit extent length for allocation to AG size
  xfs: speculative delayed allocation uses rounddown_power_of_2 badly
  xfs: fix efi item leak on forced shutdown
  xfs: fix log ticket leak on forced shutdown.

11 years agovirtio: update MAINTAINERS
Michael S. Tsirkin [Mon, 31 Jan 2011 06:16:20 +0000 (16:46 +1030)]
virtio: update MAINTAINERS

Patches should keep coming through Rusty but it helps if I'm Cc'd as
well.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Mon, 31 Jan 2011 22:07:40 +0000 (08:07 +1000)]
Merge branch 'usb-linus' of git://git./linux/kernel/git/gregkh/usb-2.6

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (42 commits)
  usb: gadget: composite: avoid access beyond array max length
  USB: serial: handle Data Carrier Detect changes
  USB: gadget: Fix endpoint representation in ci13xxx_udc
  USB: gadget: Fix error path in ci13xxx_udc gadget probe function
  usb: pch_udc: Fix the worning log issue at gadget driver remove
  USB: serial: Updated support for ICOM devices
  USB: ehci-mxc: add work-around for efika mx/sb bug
  USB: unbreak ehci-mxc on otg port of i.MX27
  drivers: update to pl2303 usb-serial to support Motorola cables
  USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products
  USB serial: add missing .usb_driver field in serial drivers
  USB: ehci-fsl: Fix 'have_sysif_regs' detection
  USB: g_printer: fix bug in module parameter definitions
  USB: g_printer: fix bug in unregistration
  USB: uss720: remove duplicate USB device
  MAINTAINERS: add ueagle-atm entry
  USB: EHCI: fix DMA deallocation bug
  USB: pch_udc: support new device ML7213 IOH
  usb: pch_udc: Fixed issue which does not work with g_serial
  usb: set ep_dev async suspend should be later than device_initialize
  ...

11 years agoMerge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Mon, 31 Jan 2011 22:06:31 +0000 (08:06 +1000)]
Merge branch 'staging-linus' of git://git./linux/kernel/git/gregkh/staging-2.6

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (26 commits)
  staging: r8712u: Add new device IDs
  staging: brcm80211: fix suspend/resume issue in brcmsmac
  staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel
  Staging: iio: Aditional fixpoint formatted output bugfix
  staging: usbip: vhci: use urb->dev->portnum to find port
  staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO
  staging: usbip: vhci: friendly log messages for connection errors
  staging: usbip: vhci: refuse to enqueue for dead connections
  staging: usbip: vhci: give back URBs from in-flight unlink requests
  staging: usbip: vhci: update reference count for usb_device
  staging: usbip: stub: update refcounts for devices and interfaces
  staging: tidspbridge: replace mbox callback with notifier_call
  staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card
  Staging: speakup: &&/|| confusion in silent_store()
  iio: Fixpoint formatted output bugfix
  staging: rt2860: Fix incorrect netif_stop_queue usage warning
  staging: r8712u: Fix memory leak in firmware loading
  staging: tidspbridge: configure full L1 MMU range
  staging: rt2870sta: Add ID for Linksys WUSB100v2
  Staging: xgfib: put parenthesis in the right place
  ...

11 years agoMerge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Mon, 31 Jan 2011 22:05:19 +0000 (08:05 +1000)]
Merge branch 'tty-linus' of git://git./linux/kernel/git/gregkh/tty-2.6

* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty/serial: fix apbuart build
  n_hdlc: fix read and write locking
  serial: unbreak billionton CF card
  tty: use for_each_console() and WARN() on sysfs failures
  vt: fix issue when fbcon wants to takeover a second time.

Fix up trivial conflict in drivers/tty/tty_io.c

11 years agoARM: smp_on_up: allow non-ARM SMP processors
Russell King [Sun, 30 Jan 2011 16:40:20 +0000 (16:40 +0000)]
ARM: smp_on_up: allow non-ARM SMP processors

Allow non-ARM SMP processors to use the SMP_ON_UP feature.  CPUs
supporting SMP must have the new CPU ID format, so check for this first.
Then check for ARM11MPCore, which fails the MPIDR check.  Lastly check
the MPIDR reports multiprocessing extensions and that the CPU is part of
a multiprocessing system.

Cc: <stable@kernel.org>
Reported-and-Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
11 years agoARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+
Russell King [Sun, 30 Jan 2011 11:29:40 +0000 (11:29 +0000)]
ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+

Ensure that the ISA/PCI IO space accessors are properly ordered on
ARMv6+ architectures.  These should always be ordered with respect to
all other accesses.

This also fixes __iormb() and __iowmb() not being visible to ioread/
iowrite if a platform defines its own MMIO accessors.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
11 years agoARM: initrd: disable initrd if passed address overlaps reserved region
Russell King [Sun, 30 Jan 2011 11:21:05 +0000 (11:21 +0000)]
ARM: initrd: disable initrd if passed address overlaps reserved region

Disable the initrd if the passed address already overlaps the reserved
region.  This avoids oopses on Netwinders when NeTTrom tells the kernel
that an initrd is located at mem+4MB, but this overlaps the BSS,
resulting in the kernels in-use BSS being freed.

This should be applied to v2.6.37-stable.

Cc: <stable@kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
11 years agoARM: footbridge: fix debug macros
Russell King [Fri, 28 Jan 2011 20:57:57 +0000 (20:57 +0000)]
ARM: footbridge: fix debug macros

0ea1293 (arm: return both physical and virtual addresses from addruart)
changed the way the 'addruart' worked, making it return both the virt
and phys addresses.  Unfortunately, for footbridge, these were reversed.
Fix that.  Tested on Netwinder.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
11 years agoARM: mmci: round down the bytes transferred on error
Russell King [Sun, 30 Jan 2011 21:06:53 +0000 (21:06 +0000)]
ARM: mmci: round down the bytes transferred on error

We should not report incomplete blocks on error.  Return the number of
bytes successfully transferred, rounded down to the nearest block.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
11 years agoARM: mmci: complete the transaction on error
Russell King [Sun, 30 Jan 2011 21:03:50 +0000 (21:03 +0000)]
ARM: mmci: complete the transaction on error

When we encounter an error, make sure we complete the transaction
otherwise we'll leave the request dangling.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
11 years agoMerge branch 'for-linus' of git://git.infradead.org/ubi-2.6
Linus Torvalds [Mon, 31 Jan 2011 03:04:51 +0000 (13:04 +1000)]
Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6

* 'for-linus' of git://git.infradead.org/ubi-2.6:
  Revert "UBI: use mtd->writebufsize to set minimal I/O unit size"

11 years agoInput: rc-keymap - return KEY_RESERVED for unknown mappings
Dmitry Torokhov [Sat, 29 Jan 2011 07:33:29 +0000 (23:33 -0800)]
Input: rc-keymap - return KEY_RESERVED for unknown mappings

Do not respond with -EINVAL to EVIOCGKEYCODE for not-yet-mapped
scancodes, but rather return KEY_RESERVED.

This fixes breakage with Ubuntu's input-kbd utility that stopped
returning full keymaps for remote controls.

Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Mark Lord <kernel@teksavvy.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Mon, 31 Jan 2011 03:02:34 +0000 (13:02 +1000)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics - retry failed resets when reconnecting
  Input: synaptics - fix reconnect logic on MT devices
  Input: tegra-kbc - fix keymap entry for LeftMeta key
  Input: tegra-kbc - fix build error

11 years agoFix prlimit64 for suid/sgid processes
Kacper Kornet [Fri, 28 Jan 2011 23:21:04 +0000 (00:21 +0100)]
Fix prlimit64 for suid/sgid processes

Since check_prlimit_permission always fails in the case of SUID/GUID
processes, such processes are not able to read or set their own limits.
This commit changes this by assuming that process can always read/change
its own limits.

Signed-off-by: Kacper Kornet <kornet@camk.edu.pl>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agointel_scu_ipc: remove duplicated #include
Huang Weiyi [Fri, 28 Jan 2011 14:05:25 +0000 (22:05 +0800)]
intel_scu_ipc: remove duplicated #include

Remove duplicated #include('s) in
  drivers/platform/x86/intel_scu_ipc.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoNTFS: Fix invalid pointer dereference in ntfs_mft_record_alloc().
Anton Altaparmakov [Fri, 28 Jan 2011 20:45:28 +0000 (20:45 +0000)]
NTFS: Fix invalid pointer dereference in ntfs_mft_record_alloc().

In ntfs_mft_record_alloc() when mapping the new extent mft record with
map_extent_mft_record() we overwrite @m with the return value and on
error, we then try to use the old @m but that is no longer there as @m
now contains an error code instead so we crash when dereferencing the
error code as if it were a pointer.

The simple fix is to use a temporary variable to store the return value
thus preserving the original @m for later use.  This is a backport from
the commercial Tuxera-NTFS driver and is well tested...

Thanks go to Julia Lawall for pointing this out (whilst I had fixed it
in the commercial driver I had failed to fix it in the Linux kernel).

Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Mon, 31 Jan 2011 02:56:27 +0000 (12:56 +1000)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: More crypto cleanup (try #2)
  CIFS: Add strictcache mount option
  CIFS: Implement cifs_strict_writev (try #4)
  [CIFS] Replace cifs md5 hashing functions with kernel crypto APIs

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas...
Linus Torvalds [Mon, 31 Jan 2011 02:55:38 +0000 (12:55 +1000)]
Merge branch 'for-linus' of git://git./linux/kernel/git/cmarinas/linux-2.6-cm

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm:
  kmemleak: Allow kmemleak metadata allocations to fail
  kmemleak: remove memset by using kzalloc

11 years agoMerge branch 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6
Linus Torvalds [Mon, 31 Jan 2011 02:54:54 +0000 (12:54 +1000)]
Merge branch 'zerolen' of git://git./linux/kernel/git/jgarzik/misc-2.6

* 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  Delete zero-length drivers/staging/vme/bridges/Module.symvers

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Mon, 31 Jan 2011 02:53:12 +0000 (12:53 +1000)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: HDA: Fix automute on Thinkpad L412/L512
  ALSA: HDA: Fix dmesg output of HDMI supported bits
  ALSA: fix invalid hardware.h include in ac97c for AVR32 architecture
  ASoC: correct link specifications for corgi, poodle and spitz
  ASoC: Samsung: Fix outdated cpu_dai_name for s3c24xx i2s
  ASoC: Fix codec device id format used by some dai_links
  ALSA: azt3328 -  fix broken AZF_FMT_XLATE macro
  ALSA: Xonar, CS43xx: Don't overrun static array
  ASoC: Handle low measured DC offsets for wm_hubs devices
  ASoC: da8xx/omap-l1xx: match codec_name with i2c ids
  ASoC: WM8994: fix wrong value in tristate function
  ASoC: WM8995: Fix incorrect use of snd_soc_update_bits()

11 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Mon, 31 Jan 2011 02:51:28 +0000 (12:51 +1000)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: set queue DMA alignment to sector size for ATAPI too
  libata: DVR-212D can't do SETXFER DVD-RW DVR-212D
  ahci: add HFLAG_YES_FBS and apply it to 88SE9128
  pata_hpt37x: inherit prereset() method for HPT374
  ahci: AHCI mode SATA patch for Intel DH89xxCC DeviceIDs
  pata_hpt37x: fold 'if' statement into 'switch'
  pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)
  pata_hpt{366|37x}: use pr_warning(...) instead of printk(KERN_WARNING ...)
  pata_mpc52xx: inherit from ata_bmdma_port_ops

11 years agoMerge branch 'for-linus' of git://android.git.kernel.org/kernel/tegra
Linus Torvalds [Mon, 31 Jan 2011 02:49:26 +0000 (12:49 +1000)]
Merge branch 'for-linus' of git://android.git./kernel/tegra

* 'for-linus' of git://android.git.kernel.org/kernel/tegra:
  ARM: tegra: clock: Add forward reference to struct clk
  ARM: tegra: irq: Rename gic pointers to avoid conflicts
  arm/tegra: Fix tegra irq_data conversion

11 years agoInput: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers
Mark Brown [Sun, 30 Jan 2011 20:31:30 +0000 (12:31 -0800)]
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers

Some of the WM831x series of PMICs from Wolfson Microelectronics include
a resistive touchscreen controller. Implement support for these controllers
within the input API.

Platform data is supported to allow configuration of system parameters such
as selection between four and five wire touchscreens and for specification
of optional direct to CPU IRQs for sample availability and for pen down.
Use of this feature for at least the data IRQ is strongly recommended.

Thanks to Julien Boibessot for extensive testing and detailed feedback.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoRevert "UBI: use mtd->writebufsize to set minimal I/O unit size"
Artem Bityutskiy [Sat, 29 Jan 2011 16:27:13 +0000 (18:27 +0200)]
Revert "UBI: use mtd->writebufsize to set minimal I/O unit size"

This reverts commit a121f643993474548fe98144514c50dd4f3dbe76.

Unfortunately, this commit breaks UBIFS backward compatibility and
makes new UBIFS refuse older UBIFS-formatted media:

UBIFS error: validate_sb: min. I/O unit mismatch: 8 in superblock, 64 real

Thus, we have to revert this patch and work on a better solution.

Reported-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
11 years agoInput: synaptics - retry failed resets when reconnecting
Alexandre Peixoto Ferreira [Sat, 29 Jan 2011 06:05:14 +0000 (22:05 -0800)]
Input: synaptics - retry failed resets when reconnecting

On some machines, like Dell Studio XPS 16 (1640), touchpad fails to
respond to the standard query after first reset but may start
responding later, so let's repeat reset sequence several (3) times.

Signed-off-by: Alexandre Peixoto Ferreira <alexandref75@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: synaptics - fix reconnect logic on MT devices
Alexandre Peixoto Ferreira [Sat, 29 Jan 2011 06:05:14 +0000 (22:05 -0800)]
Input: synaptics - fix reconnect logic on MT devices

synaptics_set_advanced_gesture_mode() affect capabilities bits we should
perform comparison after calling this function, otherwise they will never
match and we will be forced to perform full reconnect.

Signed-off-by: Alexandre Peixoto Ferreira <alexandref75@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tegra-kbc - fix keymap entry for LeftMeta key
Rakesh Iyer [Sat, 29 Jan 2011 06:05:14 +0000 (22:05 -0800)]
Input: tegra-kbc - fix keymap entry for LeftMeta key

Correct key mapping for Left Meta key.

Signed-off-by: Rakesh Iyer <riyer@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoInput: tegra-kbc - fix build error
Rakesh Iyer [Sat, 29 Jan 2011 06:05:14 +0000 (22:05 -0800)]
Input: tegra-kbc - fix build error

Fix build error introduced by variable name change.

Signed-off-by: Rakesh Iyer <riyer@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
11 years agoNFS: NFSv4 readdir loses entries
Chuck Lever [Fri, 28 Jan 2011 17:41:05 +0000 (12:41 -0500)]
NFS: NFSv4 readdir loses entries

On recent 2.6.38-rc kernels, connectathon basic test 6 fails on
NFSv4 mounts of OpenSolaris with something like:

> ./test6: readdir
>  ./test6: (/mnt/klimt/matisse.test) didn't read expected 'file.12' dir entry, pass 0
>  ./test6: (/mnt/klimt/matisse.test) didn't read expected 'file.82' dir entry, pass 0
>  ./test6: (/mnt/klimt/matisse.test) didn't read expected 'file.164' dir entry, pass 0
>  ./test6: (/mnt/klimt/matisse.test) Test failed with 3 errors
> basic tests failed
> Tests failed, leaving /mnt/klimt mounted
> [cel@matisse cthon04]$

I narrowed the problem down to nfs4_decode_dirent() reporting that the
decode buffer had overflowed while decoding the entries for those
missing files.

verify_attr_len() assumes both it's pointer arguments reside on the
same page.  When these arguments point to locations on two different
pages, verify_attr_len() can report false errors.  This can happen now
that a large NFSv4 readdir result can span pages.

We have reasonably good checking in nfs4_decode_dirent() anyway, so
it should be safe to simply remove the extra checking.

At a guess, this was introduced by commit 6650239a, "NFS: Don't use
vm_map_ram() in readdir".

Cc: stable@kernel.org [2.6.37]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
11 years agoNFS: Micro-optimize nfs4_decode_dirent()
Chuck Lever [Fri, 28 Jan 2011 17:40:55 +0000 (12:40 -0500)]
NFS: Micro-optimize nfs4_decode_dirent()

Make the decoding of NFSv4 directory entries slightly more efficient
by:

  1.  Avoiding unnecessary byte swapping when checking XDR booleans,
      and

  2.  Not bumping "p" when its value will be immediately replaced by
      xdr_inline_decode()

This commit makes nfs4_decode_dirent() consistent with similar logic
in the other two decode_dirent() functions.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
11 years agoNFS: Fix an NFS client lockdep issue
Trond Myklebust [Thu, 27 Jan 2011 19:55:39 +0000 (14:55 -0500)]
NFS: Fix an NFS client lockdep issue

There is no reason to be freeing the delegation cred in the rcu callback,
and doing so is resulting in a lockdep complaint that rpc_credcache_lock
is being called from both softirq and non-softirq contexts.

Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
11 years agoxfs: xfs_bmap_add_extent_delay_real should init br_startblock
bpm@sgi.com [Wed, 19 Jan 2011 17:41:58 +0000 (17:41 +0000)]
xfs: xfs_bmap_add_extent_delay_real should init br_startblock

When filling in the middle of a previous delayed allocation in
xfs_bmap_add_extent_delay_real, set br_startblock of the new delay
extent to the right to nullstartblock instead of 0 before inserting
the extent into the ifork (xfs_iext_insert), rather than setting
br_startblock afterward.

Adding the extent into the ifork with br_startblock=0 can lead to
the extent being copied into the btree by xfs_bmap_extent_to_btree
if we happen to convert from extents format to btree format before
updating br_startblock with the correct value.  The unexpected
addition of this delay extent to the btree can cause subsequent
XFS_WANT_CORRUPTED_GOTO filesystem shutdown in several
xfs_bmap_add_extent_delay_real cases where we are converting a delay
extent to real and unexpectedly find an extent already inserted.
For example:

911         case BMAP_LEFT_FILLING:
912                 /*
913                  * Filling in the first part of a previous delayed allocation.
914                  * The left neighbor is not contiguous.
915                  */
916                 trace_xfs_bmap_pre_update(ip, idx, state, _THIS_IP_);
917                 xfs_bmbt_set_startoff(ep, new_endoff);
918                 temp = PREV.br_blockcount - new->br_blockcount;
919                 xfs_bmbt_set_blockcount(ep, temp);
920                 xfs_iext_insert(ip, idx, 1, new, state);
921                 ip->i_df.if_lastex = idx;
922                 ip->i_d.di_nextents++;
923                 if (cur == NULL)
924                         rval = XFS_ILOG_CORE | XFS_ILOG_DEXT;
925                 else {
926                         rval = XFS_ILOG_CORE;
927                         if ((error = xfs_bmbt_lookup_eq(cur, new->br_startoff,
928                                         new->br_startblock, new->br_blockcount,
929                                         &i)))
930                                 goto done;
931                         XFS_WANT_CORRUPTED_GOTO(i == 0, done);

With the bogus extent in the btree we shutdown the filesystem at
931.  The conversion from extents to btree format happens when the
number of extents in the inode increases above ip->i_df.if_ext_max.
xfs_bmap_extent_to_btree copies extents from the ifork into the
btree, ignoring all delalloc extents which are denoted by
br_startblock having some value of nullstartblock.

SGI-PV: 1013221

Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
11 years agoxfs: fix dquot shaker deadlock
Dave Chinner [Fri, 28 Jan 2011 00:20:46 +0000 (11:20 +1100)]
xfs: fix dquot shaker deadlock

Commit 368e136 ("xfs: remove duplicate code from dquot reclaim") fails
to unlock the dquot freelist when the number of loop restarts is
exceeded in xfs_qm_dqreclaim_one(). This causes hangs in memory
reclaim.

Rework the loop control logic into an unwind stack that all the
different cases jump into. This means there is only one set of code
that processes the loop exit criteria, and simplifies the unlocking
of all the items from different points in the loop. It also fixes a
double increment of the restart counter from the qi_dqlist_lock
case.

Reported-by: Malcolm Scott <lkml@malc.org.uk>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
11 years agoxfs: handle CIl transaction commit failures correctly
Dave Chinner [Thu, 27 Jan 2011 02:23:28 +0000 (13:23 +1100)]
xfs: handle CIl transaction commit failures correctly

Failure to commit a transaction into the CIL is not handled
correctly. This currently can only happen when racing with a
shutdown and requires an explicit shutdown check, so it rare and can
be avoided. Remove the shutdown check and make the CIL commit a void
function to indicate it will always succeed, thereby removing the
incorrectly handled failure case.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>