Dave Airlie [Fri, 28 May 2010 20:50:37 +0000 (06:50 +1000)]
drm/radeon: fix the r100/r200 ums block 0 page fix
airlied -> brown paper bag.
I blame Hi-5 or the Wiggles for lowering my IQ, move the fix inside some
brackets instead of breaking everything in site.
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jiri Slaby [Mon, 24 May 2010 19:14:15 +0000 (12:14 -0700)]
agp: amd64, fix pci reference leaks
Stanse found pci reference leaks in uli_agp_init and nforce3_agp_init
initialization functions.
The PCI devices are bridges, so it's not critical, but still worth fixing.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Adam Jackson [Tue, 25 May 2010 20:33:09 +0000 (16:33 -0400)]
drm/edid: Allow non-fatal checksum errors in CEA blocks
Switches will try to update the topology address and not correctly fix
up the checksum, so just let it slide.
https://bugs.freedesktop.org/28229
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Stefan Richter [Wed, 26 May 2010 00:27:44 +0000 (10:27 +1000)]
drm/radeon/kms: suppress a build warning (unused variable)
At least 'make CONFIG_DEBUG_SECTION_MISMATCH=y' causes
drivers/gpu/drm/radeon/atombios_crtc.c: In function 'atombios_crtc_set_pll':
drivers/gpu/drm/radeon/atombios_crtc.c:684: warning: 'pll' may be used uninitialized in this function
which has the looks of a falso positive.
Add a default: case so that gcc rests assured that all possible pll_id's are covered.
Keep the present cases that fall through to the default one for self-documentation.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Prarit Bhargava [Mon, 24 May 2010 00:24:07 +0000 (10:24 +1000)]
drm: Fixes linux-next & linux-2.6 checkstack warnings:
drivers/gpu/drm/nouveau/nv40_graph.c: In function `nv40_graph_init':
drivers/gpu/drm/nouveau/nv40_graph.c:400: warning: the frame size of 1184 bytes is larger than 1024 bytes
drivers/gpu/drm/radeon/radeon_atombios.c: In function `radeon_get_atom_connector_info_from_supported_devices_table':
drivers/gpu/drm/radeon/radeon_atombios.c:857: warning: the frame size of 1872 bytes is larger than 1024 bytes
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Randy Dunlap [Mon, 24 May 2010 00:00:40 +0000 (17:00 -0700)]
nouveau: fix acpi_lid_open undefined
When CONFIG_ACPI_BUTTON=m (and probably when ACPI_BUTTON is not enabled)
and NOUVEAU is built-in (not as a loadable module):
nouveau_connector.c:(.text+0xe17ce): undefined reference to `acpi_lid_open'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Fri, 21 May 2010 16:48:54 +0000 (18:48 +0200)]
drm/radeon/kms: release AGP bridge at suspend
I think it's good to release the AGP bridge at suspend
and reacquire it at resume. Also fix :
https://bugzilla.kernel.org/show_bug.cgi?id=15969
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 20 May 2010 22:44:49 +0000 (18:44 -0400)]
drm/radeon/kms/pm/r600: select the mid clock mode for single head low profile
This saves some more power at the expense of performance.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 21 May 2010 05:44:32 +0000 (15:44 +1000)]
Merge remote branch 'nouveau/for-airlied' into drm-next
* nouveau/for-airlied:
drm/nouveau: fix i2c-related init table handlers
drm/nouveau: support init table i2c device identifier 0x81
drm/nouveau: ensure we've parsed i2c table entry for INIT_*I2C* handlers
drm/nouveau: display error message for any failed init table opcode
drm/nouveau: fix init table handlers to return proper error codes
drm/nv50: support fractional feedback divider on newer chips
drm/nv50: fix monitor detection on certain chipsets
drm/nv50: store full dcb i2c entry from vbios
drm/nv50: fix suspend/resume with DP outputs
drm/nv50: output calculated crtc pll when debugging on
drm/nouveau: dump pll limits entries when debugging is on
drm/nouveau: bios parser fixes for eDP boards
drm/nouveau: fix a nouveau_bo dereference after it's been destroyed
drm/nv40: remove some completed ctxprog TODOs
drm/nv04: Implement missing nv04 PGRAPH methods in software.
drm/nouveau: Use 0x5f instead of 0x9f as imageblit on original NV10.
Dave Airlie [Fri, 21 May 2010 05:41:20 +0000 (15:41 +1000)]
drm/radeon: fix power supply kconfig interaction.
radeon needs power supply to get correct PM info so select it at the radeon
level not at the kms option.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Wed, 19 May 2010 14:05:50 +0000 (16:05 +0200)]
drm/radeon/kms: record object that have been list reserved
list reservation was too optimistic about ttm object reservation
and could think that an object reserved by some other process
as reserved by the list reservation which was false. Thus when
unreserving the list it might unreserve object that it didn't
reserved in the list. Sorry if it's hard to follow but this
kind of things are just causing headheck.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Michel Dänzer [Wed, 19 May 2010 10:46:22 +0000 (12:46 +0200)]
drm/radeon: AGP memory is only I/O if the aperture can be mapped by the CPU.
Fixes AGP initialization failure with Apple UniNorth bridges due to trying to
ioremap() normal RAM.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 20 May 2010 15:26:11 +0000 (11:26 -0400)]
drm/radeon/kms: don't default display priority to high on rs4xx
Seems to cause issues with the sound hardware. Fixes kernel
bug 15982:
https://bugzilla.kernel.org/show_bug.cgi?id=15982
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 19 May 2010 15:43:40 +0000 (11:43 -0400)]
drm/edid: fix typo in 1600x1200@75 mode
Spotted by Scott Bertilson.
Fixes fdo bug 28146.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: Mark Marshall <mark.marshall@csr.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ben Skeggs [Wed, 12 May 2010 06:30:50 +0000 (16:30 +1000)]
drm/nouveau: fix i2c-related init table handlers
Mutliple issues. INIT_ZM_I2C_BYTE/INIT_I2C_BYTE didn't even try and
use the register value, and all the handlers were using the wrong
slave address.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 12 May 2010 04:45:04 +0000 (14:45 +1000)]
drm/nouveau: support init table i2c device identifier 0x81
It appears to be meant to reference the second "default index".
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 12 May 2010 04:38:25 +0000 (14:38 +1000)]
drm/nouveau: ensure we've parsed i2c table entry for INIT_*I2C* handlers
We may not have parsed the entry yet if the i2c_index is for an i2c bus
that's not referenced by a DCB encoder.
This could be done oh so much more nicely, except we have to care about
prehistoric DCB tables too, and they make life painful.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 10 May 2010 06:59:42 +0000 (16:59 +1000)]
drm/nouveau: display error message for any failed init table opcode
Some handlers don't report specific errors, but we still *really* want to
know if we failed to parse a complete init table.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 10 May 2010 06:54:23 +0000 (16:54 +1000)]
drm/nouveau: fix init table handlers to return proper error codes
We really want to be able to distinguish between INIT_DONE and an actual
error sometimes. This commit fixes up several lazy "return 0;" to be
actual error codes, and explicitly reserves "0" as "success, but stop
parsing this table".
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 28 Apr 2010 04:07:06 +0000 (14:07 +1000)]
drm/nv50: support fractional feedback divider on newer chips
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 23 Apr 2010 17:53:14 +0000 (03:53 +1000)]
drm/nv50: fix monitor detection on certain chipsets
There appears to be some kind of switch on certain chips to control whether
the DP auxch or traditional i2c bus will be operational on a connector,
this commit hopefully fixes nouveau to do the right thing.
Likely only relevent on chips with DP outputs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 23 Apr 2010 17:05:56 +0000 (03:05 +1000)]
drm/nv50: store full dcb i2c entry from vbios
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 22 Apr 2010 22:21:48 +0000 (08:21 +1000)]
drm/nv50: fix suspend/resume with DP outputs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 22 Apr 2010 17:53:42 +0000 (03:53 +1000)]
drm/nv50: output calculated crtc pll when debugging on
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 22 Apr 2010 17:08:02 +0000 (03:08 +1000)]
drm/nouveau: dump pll limits entries when debugging is on
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 19 Apr 2010 16:28:37 +0000 (02:28 +1000)]
drm/nouveau: bios parser fixes for eDP boards
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 15 Apr 2010 04:42:34 +0000 (14:42 +1000)]
drm/nouveau: fix a nouveau_bo dereference after it's been destroyed
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 12 Apr 2010 03:35:10 +0000 (13:35 +1000)]
drm/nv40: remove some completed ctxprog TODOs
I actually thought these were gone already when the initial commit was
done.. I guess not!
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Kościelnicki [Sun, 11 Apr 2010 18:41:38 +0000 (18:41 +0000)]
drm/nv04: Implement missing nv04 PGRAPH methods in software.
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Kościelnicki [Sun, 11 Apr 2010 18:16:21 +0000 (18:16 +0000)]
drm/nouveau: Use 0x5f instead of 0x9f as imageblit on original NV10.
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dave Airlie [Wed, 19 May 2010 00:35:02 +0000 (10:35 +1000)]
drm/radeon: fix hdmi offset bug reported by smatch.
Reported-by: Dan Carpenter
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 18 May 2010 23:26:47 +0000 (19:26 -0400)]
drm/radeon/kms: hpd cleanup
- Use radeon hpd enum consistently (in both hotplug and dp)
- Legacy r100 with DVI should be HPD_1 not NONE
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 18 May 2010 23:26:46 +0000 (19:26 -0400)]
drm/radeon/kms: reset ddc_bus in object header parsing
Some LVDS connectors don't have a ddc bus, so reset the
ddc bus to invalid before parsing the next connector
to avoid using stale ddc bus data. Should fix
fdo bug 28164.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ben Hutchings [Wed, 24 Mar 2010 03:36:31 +0000 (03:36 +0000)]
amd64-agp: Probe unknown AGP devices the right way
The current initialisation code probes 'unsupported' AGP devices
simply by calling its own probe function. It does not lock these
devices or even check whether another driver is already bound to
them.
We must use the device core to manage this. So if the specific
device id table didn't match anything and agp_try_unsupported=1,
switch the device id table and call driver_attach() again.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ben Hutchings [Wed, 24 Mar 2010 03:33:48 +0000 (03:33 +0000)]
sis-agp: Remove SIS 760, handled by amd64-agp
SIS 760 is listed in the device tables for both amd64-agp and sis-agp.
amd64-agp is apparently preferable since it has workarounds for some
BIOS misconfigurations that sis-agp doesn't handle.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 18 May 2010 23:35:51 +0000 (09:35 +1000)]
Merge remote branch 'anholt/drm-intel-next' into drm-next
* anholt/drm-intel-next: (515 commits)
drm/i915: Fix out of tree builds
drm/i915: move fence lru to struct drm_i915_fence_reg
drm/i915: don't allow tiling changes on pinned buffers v2
drm/i915: Be extra careful about A/D matching for multifunction SDVO
drm/i915: Fix DDC bus selection for multifunction SDVO
drm/i915: cleanup mode setting before unmapping registers
drm/i915: Make fbc control wrapper functions
drm/i915: Wait for the GPU whilst shrinking, if truly desperate.
drm/i915: Use spatio-temporal dithering on PCH
[MTD] Remove zero-length files mtdbdi.c and internal.ho
pata_pcmcia / ide-cs: Fix bad hashes for Transcend and kingston IDs
libata: Fix several inaccuracies in developer's guide
slub: Fix bad boundary check in init_kmem_cache_nodes()
raid6: fix recovery performance regression
KEYS: call_sbin_request_key() must write lock keyrings before modifying them
KEYS: Use RCU dereference wrappers in keyring key type code
KEYS: find_keyring_by_name() can gain access to a freed keyring
ALSA: hda: Fix 0 dB for Packard Bell models using Conexant CX20549 (Venice)
ALSA: hda - Add quirk for Dell Inspiron 19T using a Conexant CX20582
ALSA: take tu->qlock with irqs disabled
...
Dave Airlie [Tue, 18 May 2010 09:00:14 +0000 (19:00 +1000)]
drm/radeon/pm: fix device_create_file return value checks.
print an error if these fail.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 17 May 2010 23:41:26 +0000 (19:41 -0400)]
drm/radeon/kms/pm: fix r6xx+ profile setup
This patch is a combination of the previous two profile
patches, but without the index bugs. It cleans up and
fixes some issues with pm profile setup on r6xx chips.
Some tables have different orderings for the power states,
also, r600 only has 1 clock mode per power state. On
desktop cards there are no battery modes, so the low and high
power states are the same. For the low profile case, choose
the lower clock mode.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 7 May 2010 20:58:27 +0000 (16:58 -0400)]
drm/radeon/kms/pm: make pm spam debug only
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 7 May 2010 19:10:16 +0000 (15:10 -0400)]
drm/radeon/kms/pm: rework power management
- Separate dynpm and profile based power management methods. You can select the pm method
by echoing the selected method ("dynpm" or "profile") to power_method in sysfs.
- Expose basic 4 profile in profile method
"default" - default clocks
"auto" - select between low and high based on ac/dc state
"low" - DC, low power mode
"high" - AC, performance mode
The current base profile is "default", but it should switched to "auto" once we've tested
on more systems. Switching the state is a matter of echoing the requested profile to
power_profile in sysfs. The lowest power states are selected automatically when dpms turns
the monitors off in all states but default.
- Remove dynamic fence-based reclocking for the moment. We can revisit this later once we
have basic pm in.
- Move pm init/fini to modesetting path. pm is tightly coupled with display state. Make sure
display side is initialized before pm.
- Add pm suspend/resume functions to make sure pm state is properly reinitialized on resume.
- Remove dynpm module option. It's now selectable via sysfs.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 3 May 2010 05:13:14 +0000 (01:13 -0400)]
drm/radeon/kms/pm: add support for no display power states
The lowest power states often cause display problems, so only enable
them when all displays are off.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 6 May 2010 15:02:24 +0000 (11:02 -0400)]
drm/radeon/kms: fix lock ordering in ring, ib handling
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Matthew Garrett [Fri, 30 Apr 2010 19:48:23 +0000 (15:48 -0400)]
radeon: Use fences to gate entry to reclocking on <r600
GUI idle interrupts don't seem to work terribly well on r500 and earlier,
so let's use a fence instead.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Matthew Garrett [Fri, 30 Apr 2010 19:24:17 +0000 (15:24 -0400)]
radeon: Split out ring locking and allocation
We need to handle the ring while we've already locked it, so split out
the allocation and commit functions in order to allow them to be used.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 30 Apr 2010 19:34:12 +0000 (15:34 -0400)]
drm/radeon/kms: enable misc pm power state features on r1xx-r4xx
voltage drop, dynamic voltage, dynamic sclk, pcie lane adjust, etc,
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 29 Apr 2010 20:33:38 +0000 (16:33 -0400)]
drm/radeon/kms: enable misc pm power state features on r5xx, rs6xx
voltage drop, dynamic voltage, dynamic sclk, pcie lane adjust, etc,
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 29 Apr 2010 20:14:02 +0000 (16:14 -0400)]
drm/radeon/kms: re-enable gui idle interrupts on r6xx+
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 29 Apr 2010 08:37:59 +0000 (18:37 +1000)]
drm/radeon/kms: take vram mutex pointer before derefing object.
since derefing the object might free it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 29 Apr 2010 04:22:43 +0000 (00:22 -0400)]
drm/radeon/kms: more pm fixes
- disable gui idle interrupt use
Seems to hang some r5xx chips
- move vbl range check into
existing vbl check function in
radeon_pm.c
- disable crtc mc acccess for the
whole reclocking process
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ben Skeggs [Wed, 28 Apr 2010 01:46:42 +0000 (11:46 +1000)]
drm: move radeon_fixed.h to shared drm_fixed.h header
Will be used by nouveau driver also in the near future.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Matthew Garrett [Wed, 28 Apr 2010 18:45:05 +0000 (14:45 -0400)]
radeon: Enable memory reclocking on r100-500
This seems to be relatively stable now, so enable it for these chipsets
too.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Matthew Garrett [Wed, 28 Apr 2010 16:13:06 +0000 (12:13 -0400)]
radeon: Try harder to ensure we reclock in vblank
The vblank interrupt on r600 doesn't seem to be especially reliable, so
perform some sanity checks before the actual reclock.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Matthew Garrett [Tue, 27 Apr 2010 21:16:58 +0000 (17:16 -0400)]
radeon: Fix locking in power management paths
The ttm code could take vram_mutex followed by cp_mutex, while the
reclocking code would do the reverse. Hilarity could ensue.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Matthew Garrett [Tue, 27 Apr 2010 17:58:46 +0000 (13:58 -0400)]
radeon: Make sure that we determine the correct PM state before transition
We need to choose the correct PM state to transition into before starting
the actual change. Call radeon_get_power_state() at the top of the clock
setting to do so.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Matthew Garrett [Mon, 26 Apr 2010 21:01:16 +0000 (17:01 -0400)]
radeon: Enable memory reclockong on r600
With luck, dynamic memory reclocking on r600 should be stable with
the previous patches. Enable it.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Matthew Garrett [Mon, 26 Apr 2010 20:02:26 +0000 (16:02 -0400)]
radeon: Stop the ttm workqueue while reclocking
The ttm bo workqueue may touch objects while we're reclocking, so make
sure it's blocked until we're done.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Matthew Garrett [Mon, 26 Apr 2010 20:00:09 +0000 (16:00 -0400)]
ttm: Provide an API for starting and stopping the delayed workqueue
We want to be able to prevent the delayed workqueue from changing state
while we're reclocking, so add an API to block and unblock it.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Matthew Garrett [Mon, 26 Apr 2010 19:57:01 +0000 (15:57 -0400)]
radeon: Take drm struct_mutex over reclocking
We need to block the drm core from doing anything that may touch our vram
during reclock, so take the drm mutex for the duration.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Matthew Garrett [Mon, 26 Apr 2010 19:52:20 +0000 (15:52 -0400)]
radeon: Unmap vram pages when reclocking
Touching vram while the card is reclocking can lead to lockups. Unmap
any pages that could be touched by the CPU and block any accesses to
vram until the reclocking is complete.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Matthew Garrett [Mon, 26 Apr 2010 19:45:23 +0000 (15:45 -0400)]
radeon: Unify PM entry paths
There's a moderate amount of effort involved in setting the card up for
clock transitions, so unify the codepaths to make it easier to implement.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Sat, 24 Apr 2010 18:50:23 +0000 (14:50 -0400)]
drm/radeon/kms/pm: rework power management
Add two new sysfs attributes:
- dynpm
- power_state
Echoing 0/1 to dynpm disables/enables dynamic power management.
The driver scales the sclk dynamically based on the number of
queued fences. dynpm only scales sclk dynamically in single head
mode.
Echoing x.y to power_state selects a static power state (x) and clock
mode (y). This allows you to statically select a power state and clock
mode. Selecting a static clock mode will disable dynpm.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 23 Apr 2010 21:57:27 +0000 (17:57 -0400)]
drm/radeon/kms/pm: add additional asic callbacks
- pm_misc() - handles voltage, pcie lanes, and other non
clock related power mode settings. Currently disabled.
Needs further debugging
- pm_prepare() - disables crtc mem requests right now.
All memory clients need to be disabled when changing
memory clocks. This function can be expanded to include
disabling fb access as well.
- pm_finish() - enable active memory clients.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 22 Mar 2010 17:31:08 +0000 (13:31 -0400)]
drm/radeon/kms/pm: restore default power state on exit
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 22 Apr 2010 18:25:19 +0000 (14:25 -0400)]
drm/radeon/kms: minor pm cleanups
- remove non_clock_info struct
- track power state misc flags
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 5 Apr 2010 19:26:43 +0000 (15:26 -0400)]
drm/radeon/kms/pm: clean power state printing
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 24 Mar 2010 15:32:29 +0000 (11:32 -0400)]
drm/radeon/kms/pm: don't enable pm if there is only on power state
Just adds overhead when the power state will never change.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 22 Apr 2010 18:17:56 +0000 (14:17 -0400)]
drm/radeon/kms/atom: load hwmon drivers
Hook the atom table parsing up to module loading, so we can automatically
load the appropriate hwmon drivers.
Based on initial patch for r6xx from Matthew Garrett
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 22 Mar 2010 17:34:22 +0000 (13:34 -0400)]
drm/radeon/kms/pm: update display watermarks with power state changes
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 22 Apr 2010 18:03:55 +0000 (14:03 -0400)]
drm/radeon/kms/pm: add asic specific callbacks for getting power state (v2)
This also simplifies the code and enables reclocking with multiple heads
active by tracking whether the power states are single or multi-head
capable.
Eventually, we will want to select a power state based on external
factors (AC/DC state, user selection, etc.).
(v2) Update for evergreen
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 22 Apr 2010 17:38:05 +0000 (13:38 -0400)]
drm/radeon/kms/pm: add asic specific callbacks for setting power state (v2)
(v2) Add evergreen vbl checks
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 16 Mar 2010 21:42:46 +0000 (17:42 -0400)]
drm/radeon/kms/pm: move pm state update to crtc functions
crtcs are what we ultimately care about wrt to pm.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 15 Mar 2010 21:09:05 +0000 (17:09 -0400)]
drm/radeon/kms/pm: interate across crtcs for vblank
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 22 Apr 2010 17:25:06 +0000 (13:25 -0400)]
drm/radeon/kms/atom/pm: rework power mode parsing
On pre-r6xx, the power mode array is usually ordered:
low
...
high
default
On r6xx+:
default
low
...
high
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 17 Mar 2010 18:29:15 +0000 (14:29 -0400)]
drm/radeon/kms: wait for gpu idle before changing power mode
set proper wait condition as noted by Rafał Miłecki.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 22 Apr 2010 16:52:11 +0000 (12:52 -0400)]
drm/radeon/kms: add support for gui idle interrupts (v4)
Useful for certain power management operations. You
need to wait for the GUI engine (2D, 3D, CP, etc.) to be
idle before changing clocks or adjusting engine parameters.
(v2) Fix gui idle enable on pre-r6xx asics
(v3) The gui idle interrrupt status bit is permanently asserted
on pre-r6xx chips, but the interrrupt is still generated.
workaround it in the driver.
(v4) Add support for evergreen
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 22 Apr 2010 16:39:58 +0000 (12:39 -0400)]
drm/radeon/kms: add gui_idle callback
Check to see if the GUI engine and related blocks
(2D, 3D, CP, etc) are idle or not. There are a number
of cases when we need to know if the drawing engine
is busy.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 7 May 2010 05:02:30 +0000 (05:02 +0000)]
drm/fbdev: fix cloning on fbcon
Simple cloning rules compared to server:
(a) single crtc
(b) > 1 connector active
(c) check command line mode
(d) try and find 1024x768 DMT mode if no command line.
(e) fail to clone
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 7 May 2010 06:42:51 +0000 (06:42 +0000)]
drm/fbdev: rework output polling to be back in the core. (v4)
After thinking it over a lot it made more sense for the core to deal with
the output polling especially so it can notify X.
v2: drop plans for fake connector - per Michel's comments - fix X patch sent to xorg-devel, add intel polled/hpd setting, add initial nouveau polled/hpd settings.
v3: add config lock take inside polling, add intel/nouveau poll init/fini calls
v4: config lock was a bit agressive, only needed around connector list reading.
otherwise it could re-enter.
glisse: discard drm_helper_hpd_irq_event
v3: Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dan Carpenter [Fri, 7 May 2010 08:38:20 +0000 (08:38 +0000)]
drm: off by one in drm_edid.c
m == num_est3_modes is one past the end of the est3_modes[].
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Marcin Slusarz [Sun, 16 May 2010 15:33:09 +0000 (17:33 +0200)]
vga16fb, drm: vga16fb->drm handoff
let vga16fb claim 0xA0000+0x10000 region as its aperture;
drm drivers don't use it, so we have to detect it and kick
vga16fb manually - but only if drm is driving the primary card
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Marcin Slusarz [Sun, 16 May 2010 15:29:56 +0000 (17:29 +0200)]
fbmem, drm/nouveau: kick firmware framebuffers as soon as possible
Currently vesafb/efifb/... is kicked when hardware driver is registering
framebuffer. To do it hardware must be fully functional, so there's a short
window between start of initialisation and framebuffer registration when
two drivers touch the hardware. Unfortunately sometimes it breaks nouveau
initialisation.
Fix it by kicking firmware driver(s) before we start touching the hardware.
Reported-by: Didier Spaier <didier.spaier@epsm.fr>
Tested-by: Didier Spaier <didier.spaier@epsm.fr>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Marcin Slusarz [Sun, 16 May 2010 15:27:03 +0000 (17:27 +0200)]
fbdev: allow passing more than one aperture for handoff
It removes a hack from nouveau code which had to detect which
region to pass to kick vesafb/efifb.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Kirill Smelkov [Fri, 14 May 2010 15:45:16 +0000 (19:45 +0400)]
drm: Prefix info printk about registering panic notifier with 'drm'
Recently I've studied my system dmesg and seen this:
<lots of stuff before>
1 [ 0.478416] ACPI: Battery Slot [C1B4] (battery present)
2 [ 0.478648] ACPI: Battery Slot [C1B3] (battery absent)
3 [ 0.906678] [drm] initialized overlay support
4 [ 1.762304] Console: switching to colour frame buffer device 128x48
5 [ 1.765211] fb0: inteldrmfb frame buffer device
6 [ 1.765242] registered panic notifier
7 [ 1.765272] [drm] Initialized i915 1.6.0
20080730 for 0000:00:02.0 on minor 0
8 [ 1.765372] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<lots of stuff after>
and it was not evident who registered that panic notifier on line 6.
I'd bought it as some low-level stuff needed by kernel itself, but the
time was inappropriate -- too late for such things.
So I had to study sources to see it was drm who was registering
switch-to-fb on panic.
Let's avoid possible confusion and mark this message as going from drm
subsystem.
(I'm a bit unsure whether to use '[drm]:' or 'drm:' -- the rest of the
kernel just uses 'topic:', and even in drm_fb_helper.c we use 'fb%d:'
without [] brackets. Either way is ok with me.)
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Wed, 12 May 2010 16:01:13 +0000 (18:01 +0200)]
drm/radeon/kms: add query for crtc hw id from crtc id to get info V2
Userspace need to know the hw crtc id (0, 1, 2, ...) from the drm
crtc id. Bump the minor version so userspace can enable conditionaly
features depend on this.
V2 use num_crtc and avoid DRM_ERROR
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Adam Jackson [Thu, 13 May 2010 18:55:28 +0000 (14:55 -0400)]
drm/edid: Fix 1024x768@85Hz
Having hsync both start and end on pixel 1072 ain't gonna work very
well. Matches the X server's list.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-By: Michael Tokarev <mjt@tls.msk.ru>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Julia Lawall [Thu, 13 May 2010 19:58:56 +0000 (21:58 +0200)]
drivers/gpu/drm: Use kzalloc
Use kzalloc rather than the combination of kmalloc and memset.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,size,flags;
statement S;
@@
-x = kmalloc(size,flags);
+x = kzalloc(size,flags);
if (x == NULL) S
-memset(x, 0, size);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Reviewed-by: Corbin Simpson <MostAwesomeDude@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dan Carpenter [Fri, 14 May 2010 11:06:19 +0000 (13:06 +0200)]
drm_edid: There should be 6 Standard Timings
Smatch complained that we initialize 6 elements in add_detailed_modes()
but the timings[] array is declared with 5 elements. Adam Jackson
verified that 6 is the correct number of timings.
On Mon, May 10, 2010 at 12:08:24PM -0400, Adam Jackson wrote:
> > > struct std_timing timings[5];
> > > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> This decl is wrong, should be 6. From the 1.4 spec:
>
> "Six additional Standard Timings may be listed as a display descriptor
> (tag #FAh)."
>
> The 1.3 spec is a little less explicit about it, but does show 6
> standard timing codes in the 0xFA detailed subblock, terminated by 0x0A
> in the 18th byte. I don't have the docs for 1.2 or earlier, but we're
> paranoid enough about not adding broken timings that we should be fine.
This patch is basically a clean up, because timings[] is declared inside
a union and increasing the number of elements here doesn't change the
overall size of the union.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Julia Lawall [Sat, 15 May 2010 21:17:40 +0000 (23:17 +0200)]
drivers/gpu/drm: Use kmemdup
Use kmemdup when some other buffer is immediately copied into the
allocated region.
A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression from,to,size,flag;
statement S;
@@
- to = \(kmalloc\|kzalloc\)(size,flag);
+ to = kmemdup(from,size,flag);
if (to==NULL || ...) S
- memcpy(to, from, size);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Randy Dunlap [Mon, 17 May 2010 17:54:04 +0000 (10:54 -0700)]
vga: fix kconfig text typos
Fix typos in vga/Kconfig file
and use GPU (upper case) consistently.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dan Carpenter [Sun, 16 May 2010 06:27:52 +0000 (08:27 +0200)]
drm/edid: remove an unneeded variable
We don't use timing_level any more after:
9cf00977da0 "drm/edid: Unify
detailed block parsing between base and extension blocks".
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 18 May 2010 04:30:05 +0000 (00:30 -0400)]
drm/radeon/kms/combios: match lvds panel info parsing to ddx
Should work better on some panels.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 18 May 2010 04:23:15 +0000 (00:23 -0400)]
drm/radeon/kms/atom: fix typo in LVDS panel info parsing
Fixes LVDS issues on some laptops; notably laptops with
2048x1536 panels.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Sat, 8 May 2010 03:17:20 +0000 (23:17 -0400)]
drm/radeon/kms: fix copy pasto in disable encoders patch
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Peter Clifton [Mon, 3 May 2010 12:24:41 +0000 (13:24 +0100)]
drm/i915: Fix out of tree builds
Fixes up include paths for i915_trace.h by setting additional CFLAGS
for i915_trace_points.c to include the $src directory. The required
TRACE_INCLUDE_PATH is then "."
Signed-off-by: Peter Clifton <pcjc2@cam.ac.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Daniel Vetter [Wed, 28 Apr 2010 09:02:31 +0000 (11:02 +0200)]
drm/i915: move fence lru to struct drm_i915_fence_reg
This lru tracks fences, not objects, so move it to where it belongs.
As a side effect, this nicely shrinks drm_i915_gem_object by two
pointers.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
Daniel Vetter [Fri, 23 Apr 2010 21:01:01 +0000 (23:01 +0200)]
drm/i915: don't allow tiling changes on pinned buffers v2
Makes no sense and complicates matters for pipelined tiling changes.
So don't allow it and return -EBUSY.
v2: Fix reference leak. Thanks to Owain Ainsworth for spotting this.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
Adam Jackson [Thu, 29 Apr 2010 18:05:18 +0000 (14:05 -0400)]
drm/i915: Be extra careful about A/D matching for multifunction SDVO
If we're both RGB and TMDS capable, we'll have set up one connector for
each. When determining connectivity, require analog/digital state in
the EDID block to match analog/digital support in the connector.
Otherwise, both DVI and VGA will appear to be connected.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Adam Jackson [Fri, 23 Apr 2010 20:07:40 +0000 (16:07 -0400)]
drm/i915: Fix DDC bus selection for multifunction SDVO
Multifunction SDVO cards stopped working after 14571b4, and would report
something that looked remarkably like an ADD2 SPD ROM instead of EDID.
This appears to be because DDC bus selection was utterly horked by that
commit; controlled_output was no longer always a single bit, so
intel_sdvo_select_ddc_bus would pick bus 0, which is (unsurprisingly)
the SPD ROM bus, not a DDC bus.
So, instead of that, let's just use the DDC bus the child device table
tells us to use. I'm guessing at the bitmask and shifting from VBIOS
dumps, but it can't possibly be worse.
cf. https://bugzilla.redhat.com/584229
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Fri, 7 May 2010 21:30:03 +0000 (14:30 -0700)]
Merge remote branch 'origin/master' into drm-intel-next
Conflicts:
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/radeon/r300.c
The BSD ringbuffer support that is landing in this branch
significantly conflicts with the Ironlake PIPE_CONTROL fix on master,
and requires it to be tested successfully anyway.
Alex Deucher [Fri, 7 May 2010 21:05:22 +0000 (17:05 -0400)]
drm/radeon/kms/atom: disable the encoders in encoder_disable
Previously we just set them to dpms off. This should save
additional power.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
git.openpandora.org / pandora-kernel.git / log