10 years agoMerge branch 'master' of git://
John W. Linville [Thu, 17 Nov 2011 19:15:47 +0000 (14:15 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem

10 years agostmmac: fix pm functions avoiding sleep on spinlock
Francesco Virlinzi [Wed, 16 Nov 2011 21:58:02 +0000 (21:58 +0000)]
stmmac: fix pm functions avoiding sleep on spinlock

This patch fixes the pm functions to avoid the system
sleeps while a spinlock is taken.

Signed-off-by: Francesco Virlinzi <>
Signed-off-by: Giuseppe Cavallaro <>
Signed-off-by: David S. Miller <>
10 years agostmmac: remove spin_lock in stmmac_ioctl.
Srinivas Kandagatla [Wed, 16 Nov 2011 21:58:01 +0000 (21:58 +0000)]
stmmac: remove spin_lock in stmmac_ioctl.

This patch removes un-needed spin_lock in stmmac_ioctl while reading and
writing mdio registers. While holding spin_lock the code must be
atomic, which is not true in this case as both mdiobus_read and writes
have mutex locks.

Without this patch reading mdio registers via mii-tool results in below
mii-tool -vvv eth0"
Using SIOCGMIIPHY=0x8947
BUG: sleeping function called from invalid context at kernel/mutex.c:287
in_atomic(): 1, irqs_disabled(): 0, pid: 614, name: mii-tool
2 locks held by mii-tool/614:
 #0:  (rtnl_mutex){......}, at: [<c01fd80c>] dev_ioctl+0x550/0x674
 #1:  (&priv->lock){......}, at: [<c01b34ec>] stmmac_ioctl+0x4c/0x78
[<c002ea14>] (unwind_backtrace+0x0/0xcc) from [<c0272c38>]
[<c0272c38>] (mutex_lock_nested+0x24/0x35c) from [<c01b237c>]
[<c01b237c>] (mdiobus_read+0x44/0x70) from [<c01b0c64>]
[<c01b0c64>] (phy_mii_ioctl+0x4c/0x138) from [<c01b34fc>]
[<c01b34fc>] (stmmac_ioctl+0x5c/0x78) from [<c01fcec8>]
[<c01fcec8>] (dev_ifsioc+0x2a4/0x2c8) from [<c01fd81c>]
[<c01fd81c>] (dev_ioctl+0x560/0x674) from [<c00c36e0>]
[<c00c36e0>] (vfs_ioctl+0x2c/0x8c) from [<c00c4130>]
[<c00c4130>] (do_vfs_ioctl+0x530/0x578) from [<c00c41ac>]
[<c00c41ac>] (sys_ioctl+0x34/0x54) from [<c0028aa0>]

Signed-off-by: Srinivas Kandagatla <>
Signed-off-by: Giuseppe Cavallaro <>
Signed-off-by: David S. Miller <>
10 years agostmmac: parameters auto-tuning through HW cap reg
Giuseppe CAVALLARO [Wed, 16 Nov 2011 21:58:00 +0000 (21:58 +0000)]
stmmac: parameters auto-tuning through HW cap reg

New GMAC devices (newer than the databook 3.50a) have the
HW capability register that provides which features are actually
supported by the hardware.

On old devices many information have to be passed through the
platform, for example: enhanced descriptor structure,
TX COE etc. These are mandatory to properly configure the driver.
This remains still valid because the driver has to support old
Synopsys devices but now it's also able to override them using the
values from the HW capability register if supported.

Signed-off-by: Giuseppe Cavallaro <>
Signed-off-by: David S. Miller <>
10 years agostmmac: fix advertising 1000Base capabilties for non GMII iface
Srinivas Kandagatla [Wed, 16 Nov 2011 21:57:59 +0000 (21:57 +0000)]
stmmac: fix advertising 1000Base capabilties for non GMII iface

This patch fixes the way to stop the 1000Base advertising
capabilties for non GMII interfaces.

Signed-off-by: Srinivas Kandagatla <>
Acked-by: Giuseppe Cavallaro <>
Signed-off-by: David S. Miller <>
10 years agostmmac: use mdelay on timeout of sw reset
Francesco Virlinzi [Wed, 16 Nov 2011 21:57:58 +0000 (21:57 +0000)]
stmmac: use mdelay on timeout of sw reset

This patch uses an mdelay to manage the timeout on
sw reset to be independant of cpu_clk.

Signed-off-by: Francesco Virlinzi <>
Reviewed-by: Giuseppe Cavallaro <>
Signed-off-by: David S. Miller <>
10 years agosky2: version 1.30
stephen hemminger [Wed, 16 Nov 2011 13:43:00 +0000 (13:43 +0000)]
sky2: version 1.30

Update version number.

Signed-off-by: Stephen Hemminger <>
Signed-off-by: David S. Miller <>
10 years agosky2: used fixed RSS key
stephen hemminger [Wed, 16 Nov 2011 13:42:59 +0000 (13:42 +0000)]
sky2: used fixed RSS key

Rather than generating a different RSS key on each boot, just use
a predetermined value that will map same flow to same value on
every device.

Signed-off-by: Stephen Hemminger <>
Signed-off-by: David S. Miller <>
10 years agosky2: reduce default Tx ring size
stephen hemminger [Wed, 16 Nov 2011 13:42:58 +0000 (13:42 +0000)]
sky2: reduce default Tx ring size

The default Tx ring size for the sky2 driver is quite large and could
cause excess buffer bloat for many users. The minimum ring size
possible and still allow handling  the worst case packet on 64bit platforms
is 38 which gets rounded up to a power of 2. But most packets only require
a couple of ring elements.

Signed-off-by: Stephen Hemminger <>
Signed-off-by: David S. Miller <>
10 years agosky2: rename up/down functions
stephen hemminger [Wed, 16 Nov 2011 13:42:57 +0000 (13:42 +0000)]
sky2: rename up/down functions

The code is clearer if the up/down functions are renamed to
open/close like other drivers.  Purely syntax change.

Signed-off-by: Stephen Hemminger <>
Signed-off-by: David S. Miller <>
10 years agosky2: pci posting issues
stephen hemminger [Wed, 16 Nov 2011 13:42:56 +0000 (13:42 +0000)]
sky2: pci posting issues

A couple of the reset and setup paths have possible PCI posting issues.
When setting registers, a read is necessary to force the writes to complete.

Signed-off-by: Stephen Hemminger <>
Signed-off-by: David S. Miller <>
10 years agosky2: fix hang on shutdown (and other irq issues)
stephen hemminger [Wed, 16 Nov 2011 13:42:55 +0000 (13:42 +0000)]
sky2: fix hang on shutdown (and other irq issues)

There are several problems with recent change to how IRQ's are setup.
   * synchronize_irq in sky2_shutdown would hang because there
     was no IRQ setup.
   * when device was set to down, some IRQ bits left enabled so a
     hardware error would produce IRQ with no handler
   * quick link on Optima chip set was enabled without handler
   * suspend/resume would leave IRQ on with no handler if device
     was down

Signed-off-by: Stephen Hemminger <>
Signed-off-by: David S. Miller <>
10 years agor6040: fix check against MCRO_HASHEN bit in r6040_multicast_list
Florian Fainelli [Wed, 16 Nov 2011 06:00:08 +0000 (06:00 +0000)]
r6040: fix check against MCRO_HASHEN bit in r6040_multicast_list

We are checking whether the MCR0_HASHEN bit is set using a logical and
instead of bitwise and, fix that.

Signed-off-by: Florian Fainelli <>
Signed-off-by: David S. Miller <>
10 years agoMAINTAINERS: change email address for shemminger
Stephen Hemminger [Wed, 16 Nov 2011 22:58:46 +0000 (17:58 -0500)]
MAINTAINERS: change email address for shemminger

My old email account at linux-foundation is no longer usable after
the LF breakin.

Signed-off-by: Stephen Hemminger <>
Signed-off-by: David S. Miller <>
10 years agopch_gbe: Move #include of module.h
Joe Perches [Tue, 15 Nov 2011 13:56:14 +0000 (13:56 +0000)]
pch_gbe: Move #include of module.h

The first #include must be pch_gbe.h as it
does a #define of pr_fmt.

Signed-off-by: Joe Perches <>
Signed-off-by: David S. Miller <>
10 years agobnx2x: cache-in compressed fw image
Dmitry Kravkov [Tue, 15 Nov 2011 12:07:33 +0000 (12:07 +0000)]
bnx2x: cache-in compressed fw image

Re-request fw from fs may fail for different reasons, once the fw was
loaded we won't release it until driver is removed.

This also resolves the boot problem when initial fw is located on initrd,
but rootfs is still unavailable, in this case device reset will fail due
to absence of fw files.

Signed-off-by: Dmitry Kravkov <>
Signed-off-by: Eilon Greenstein <>
Signed-off-by: David S. Miller <>
10 years agonet/cadence: enable by default NET_ATMEL
Jean-Christophe PLAGNIOL-VILLARD [Tue, 15 Nov 2011 09:36:30 +0000 (09:36 +0000)]
net/cadence: enable by default NET_ATMEL

so the defconfig of the atmel continue to have the support of the network
as before

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <>
Cc: Nicolas Ferre <>
Signed-off-by: David S. Miller <>
10 years agobridge: correct IPv6 checksum after pull
stephen hemminger [Tue, 15 Nov 2011 08:09:14 +0000 (08:09 +0000)]
bridge: correct IPv6 checksum after pull

Bridge multicast snooping of ICMPv6 would incorrectly report a checksum problem
when used with Ethernet devices like sky2 that use CHECKSUM_COMPLETE.
When bytes are removed from skb, the computed checksum needs to be adjusted.

Signed-off-by: Stephen Hemminger <>
Tested-by: Martin Volf <>
Signed-off-by: David S. Miller <>
10 years agoqeth: Reduce CPU consumption through less SIGA-r calls
Einar Lueck [Tue, 15 Nov 2011 02:31:16 +0000 (02:31 +0000)]
qeth: Reduce CPU consumption through less SIGA-r calls

Patch avoids SIGA-r calls in case of SIGA-r required. It only calls
SIGA-r if a threshold of free buffer is reached. CPU consumption is
reduced as a consequence.

Signed-off-by: Einar Lueck <>
Signed-off-by: Frank Blaschka <>
Signed-off-by: David S. Miller <>
10 years agoqeth: l3 fix rcu splat in xmit
Frank Blaschka [Tue, 15 Nov 2011 02:31:15 +0000 (02:31 +0000)]
qeth: l3 fix rcu splat in xmit

when use dst_get_neighbour to get neighbour, we need
rcu_read_lock to protect, since dst_get_neighbour uses

Signed-off-by: David S. Miller <>
10 years agonetiucv: reinsert dev_alloc_name for device naming
Ursula Braun [Tue, 15 Nov 2011 02:31:14 +0000 (02:31 +0000)]
netiucv: reinsert dev_alloc_name for device naming

Invocation of dev_alloc_name() is re-inserted, because the created
net_device name is used to create the device name for the iucv bus.
This device is created before the register_netdev call.

Signed-off-by: Ursula Braun <>
Signed-off-by: Frank Blaschka <>
Signed-off-by: David S. Miller <>
10 years agoqeth: remove WARN_ON leftover
Christian Borntraeger [Tue, 15 Nov 2011 02:31:13 +0000 (02:31 +0000)]
qeth: remove WARN_ON leftover

The patch "qeth: exploit asynchronous delivery of storage blocks"
added a WARN_ON in qeth_schedule_recovery. A device recovery should
not cause a kernel warning. This is obviously a debugging  left-over
that we forgot to remove.

Signed-off-by: Christian Borntraeger <>
Signed-off-by: Frank Blaschka <>
Signed-off-by: David S. Miller <>
10 years agoqeth: return with -EPERM if sniffing is not enabled
Ursula Braun [Tue, 15 Nov 2011 02:31:12 +0000 (02:31 +0000)]
qeth: return with -EPERM if sniffing is not enabled

Without appropriate configuration at the SE, a HiperSockets device
cannot be used for sniffing. Setting the sniffer attribute is rejected
with -EPERM.

Signed-off-by: Ursula Braun <>
Signed-off-by: Frank Blaschka <>
Signed-off-by: David S. Miller <>
10 years agotcp: clear xmit timers in tcp_v4_syn_recv_sock()
Eric Dumazet [Mon, 14 Nov 2011 10:56:56 +0000 (10:56 +0000)]
tcp: clear xmit timers in tcp_v4_syn_recv_sock()

Simon Kirby reported divides by zero errors in __tcp_select_window()

This happens when inet_csk_route_child_sock() returns a NULL pointer :

We free new socket while we eventually armed keepalive timer in

Fix this by a call to tcp_clear_xmit_timers()

[ This is a followup to commit 918eb39962dff (net: add missing
bh_unlock_sock() calls) ]

Reported-by: Simon Kirby <>
Signed-off-by: Eric Dumazet <>
Tested-by: Simon Kirby <>
Signed-off-by: David S. Miller <>
10 years agonet-next:asix: V2 Update VERSION
Grant Grundler [Tue, 15 Nov 2011 07:12:43 +0000 (07:12 +0000)]
net-next:asix: V2 Update VERSION

Only update VERSION to reflect previous changes.

Signed-off-by: Grant Grundler <>
Signed-off-by: David S. Miller <>
10 years agonet-next:asix: V2 more fixes for ax88178 phy init sequence
Grant Grundler [Tue, 15 Nov 2011 07:12:42 +0000 (07:12 +0000)]
net-next:asix: V2 more fixes for ax88178 phy init sequence

Now works on Samsung Series 5 (chromebook)

Two fixes here:
o use 0x7F mask for phymode
o read phyid *AFTER* phy is powered up (via GPIOs)

Signed-off-by: Allan Chou <>
Signed-off-by: Grant Grundler <>
Signed-off-by: David S. Miller <>
10 years agonet-next:asix: reduce AX88772 init time by about 2 seconds
Grant Grundler [Tue, 15 Nov 2011 07:12:41 +0000 (07:12 +0000)]
net-next:asix: reduce AX88772 init time by about 2 seconds

ax88772_reset takes about 2 seconds and is called twice.
Once from ax88772_bind() directly and again indirectly from usbnet_open().
Reset the USB FW/Phy enough to blink the LEDs when inserted.

Signed-off-by: Allan Chou <>
Signed-off-by: Grant Grundler <>
Signed-off-by: David S. Miller <>
10 years agonet-next:asix:poll in asix_get_phyid in case phy not ready
Grant Grundler [Tue, 15 Nov 2011 07:12:40 +0000 (07:12 +0000)]
net-next:asix:poll in asix_get_phyid in case phy not ready

Sometimes the phy isn't ready after reset...poll and pray it will be soon.

Signed-off-by: Freddy Xin <>
Signed-off-by: Grant Grundler <>
Signed-off-by: David S. Miller <>
10 years agonet-next:asix:PHY_MODE_RTL8211CL should be 0xC
Grant Grundler [Tue, 15 Nov 2011 07:12:39 +0000 (07:12 +0000)]
net-next:asix:PHY_MODE_RTL8211CL should be 0xC

Use correct value for rtl phy support.
(rtl phy are in AX88178 devices like NWU220G and USB2-ET1000).

Signed-off-by: Allan Chou <>
Tested-by: Grant Grundler <>
Signed-off-by: David S. Miller <>
10 years agoNet, libertas: Resolve memory leak in if_spi_host_to_card()
Jesper Juhl [Sun, 13 Nov 2011 21:14:32 +0000 (22:14 +0100)]
Net, libertas: Resolve memory leak in if_spi_host_to_card()

If we hit the default case in the switch in if_spi_host_to_card() we'll leak
the memory we allocated for 'packet'. This patch resolves the leak by freeing
the allocated memory in that case.

Signed-off-by: Jesper Juhl <>
Acked-by: Dan Williams <>
Signed-off-by: John W. Linville <>
10 years agort2x00: Fix sleep-while-atomic bug in powersaving code.
Gertjan van Wingerde [Sat, 12 Nov 2011 18:10:44 +0000 (19:10 +0100)]
rt2x00: Fix sleep-while-atomic bug in powersaving code.

The generic powersaving code that determines after reception of a frame
whether the device should go back to sleep or whether is could stay
awake was calling rt2x00lib_config directly from RX tasklet context.
On a number of the devices this call can actually sleep, due to having
to confirm that the sleeping commands have been executed successfully.

Fix this by moving the call to rt2x00lib_config to a workqueue call.

This fixes bug

Tested-by: Tomas Trnka <>
Signed-off-by: Gertjan van Wingerde <>
Cc: <>
Acked-by: Ivo van Doorn <>
Signed-off-by: John W. Linville <>
10 years agort2x00: Add USB device ID of Buffalo WLI-UC-GNHP.
Gertjan van Wingerde [Sat, 12 Nov 2011 18:10:43 +0000 (19:10 +0100)]
rt2x00: Add USB device ID of Buffalo WLI-UC-GNHP.

This is reported to be an RT3070 based device.

Reported-by: Teika Kazura <>
Signed-off-by: Gertjan van Wingerde <>
Acked-by: Ivo van Doorn <>
Signed-off-by: John W. Linville <>
10 years agonet/packet: Revert incorrect dead-code changes to prb_setup_retire_blk_timer
Jesper Juhl [Mon, 14 Nov 2011 14:08:05 +0000 (14:08 +0000)]
net/packet: Revert incorrect dead-code changes to prb_setup_retire_blk_timer

Signed-off-by: Jesper Juhl <>
Signed-off-by: David S. Miller <>
10 years agoMerge branch 'for-davem' of git://
David S. Miller [Mon, 14 Nov 2011 19:46:22 +0000 (14:46 -0500)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless

10 years agoNET: MIPS: lantiq: fix etop compile error
John Crispin [Mon, 14 Nov 2011 05:01:18 +0000 (05:01 +0000)]
NET: MIPS: lantiq: fix etop compile error

The Lantiq ETOP ethernet driver fails to build in 3.2-rc1 due to 2 missing
header files.

Signed-off-by: John Crispin <>
Signed-off-by: David S. Miller <>
10 years agomlx4_en: Remove FCS bytes from packet length.
Yevgeny Petrilin [Mon, 14 Nov 2011 19:25:36 +0000 (14:25 -0500)]
mlx4_en: Remove FCS bytes from packet length.

When HW doesn't remove FCS bytes they are reported in the completion
byte count, we don't need to take them to skb.

Signed-off-by: Yevgeny Petrilin <>
Signed-off-by: David S. Miller <>
10 years agonet-netlink: Add a new attribute to expose TCLASS values via netlink
Maciej Żenczykowski [Mon, 7 Nov 2011 14:23:11 +0000 (14:23 +0000)]
net-netlink: Add a new attribute to expose TCLASS values via netlink

commit 3ceca749668a52bd795585e0f71c6f0b04814f7b added a TOS attribute.

Unfortunately TOS and TCLASS are both present in a dual-stack v6 socket,
furthermore they can have different values.  As such one cannot in a
sane way expose both through a single attribute.

Signed-off-by: Maciej Żenczyowski <>
CC: Murali Raja <>
CC: Stephen Hemminger <>
CC: Eric Dumazet <>
CC: David S. Miller <>
Signed-off-by: David S. Miller <>
10 years agonet/usb: Misc. fixes for the LG-VL600 LTE USB modem
Mark Kamichoff [Wed, 9 Nov 2011 11:48:10 +0000 (11:48 +0000)]
net/usb: Misc. fixes for the LG-VL600 LTE USB modem

Add checking for valid magic values (needed for stability in the event
corrupted packets are received) and remove some other unneeded checks.
Also, fix flagging device as WWAN (Bugzilla bug #39952).

Signed-off-by: Mark Kamichoff <>
Signed-off-by: David S. Miller <>
10 years agonet/smsc911x: Always wait for the chip to be ready
Robert Marklund [Tue, 25 Oct 2011 22:05:43 +0000 (22:05 +0000)]
net/smsc911x: Always wait for the chip to be ready

Wait for the chip to be ready before any access to it. On the
Snowball platform we need to enable an external regulator before
the chip comes online, and then it happens that the device is
not yet ready at probe time, so let's wait for it.

Signed-off-by: Robert Marklund <>
Signed-off-by: Linus Walleij <>
Signed-off-by: David S. Miller <>
10 years agobridge: Fix potential deadlock on br->multicast_lock
Andrey Vagin [Thu, 10 Nov 2011 05:48:03 +0000 (05:48 +0000)]
bridge: Fix potential deadlock on br->multicast_lock

multicast_lock is taken in softirq context, so we should use
spin_lock_bh() in userspace.

call-chain in softirq context:

call-chain in userspace:

Signed-off-by: Andrew Vagin <>
Signed-off-by: David S. Miller <>
10 years agoip6_tunnel: copy after register_netdevice
Josh Boyer [Thu, 10 Nov 2011 15:10:23 +0000 (15:10 +0000)]
ip6_tunnel: copy after register_netdevice

Commit 1c5cae815d removed an explicit call to dev_alloc_name in ip6_tnl_create
because register_netdevice will now create a valid name.  This works for the
net_device itself.

However the tunnel keeps a copy of the name in the parms structure for the
ip6_tnl associated with the tunnel. is set by copying the net_device
name in ip6_tnl_dev_init_gen.  That function is called from ip6_tnl_dev_init in
ip6_tnl_create, but it is done before register_netdevice is called so the name
is set to a bogus value in the structure.

This shows up if you do a simple tunnel add, followed by a tunnel show:

[root@localhost ~]# ip -6 tunnel add remote fec0::100 local fec0::200
[root@localhost ~]# ip -6 tunnel show
ip6tnl0: ipv6/ipv6 remote :: local :: encaplimit 0 hoplimit 0 tclass 0x00 flowlabel 0x00000 (flowinfo 0x00000000)
ip6tnl%d: ipv6/ipv6 remote fec0::100 local fec0::200 encaplimit 4 hoplimit 64 tclass 0x00 flowlabel 0x00000 (flowinfo 0x00000000)
[root@localhost ~]#

Fix this by moving the strcpy out of ip6_tnl_dev_init_gen, and calling it after
register_netdevice has successfully returned.

Signed-off-by: Josh Boyer <>
Signed-off-by: David S. Miller <>
10 years agoforcedeth: fix stats on hardware without extended stats support
david decotigny [Fri, 11 Nov 2011 16:27:34 +0000 (16:27 +0000)]
forcedeth: fix stats on hardware without extended stats support

This change makes sure that tx_packets/rx_bytes ifconfig counters are
updated even on NICs that don't provide hardware support for these
stats: they are now updated in software. For the sake of consistency,
we also now have tx_bytes updated in software (hardware counters
include ethernet CRC, and software doesn't account for it).

This reverts parts of:
 - "forcedeth: statistics optimization" (21828163b2)
 - "forcedeth: Improve stats counters" (0bdfea8ba8)
 - "forcedeth: remove unneeded stats updates" (4687f3f364)

  pktgen + loopback (
  reports identical tx_packets/rx_packets and tx_bytes/rx_bytes.

Signed-off-by: David Decotigny <>
Signed-off-by: David S. Miller <>
10 years agords: drop "select LLIST"
Paul Bolle [Sun, 13 Nov 2011 03:36:37 +0000 (03:36 +0000)]
rds: drop "select LLIST"

Commit 1bc144b625 ("net, rds, Replace xlist in net/rds/xlist.h with
llist") added "select LLIST" to the RDS_RDMA Kconfig entry. But there is
no Kconfig symbol named LLIST. The select statement for that symbol is a
nop. Drop it.

lib/llist.o is builtin, so all that's needed to use the llist
functionality is to include linux/llist.h, which this commit also did.

Signed-off-by: Paul Bolle <>
Signed-off-by: David S. Miller <>
10 years agonet/packet: remove dead code and unneeded variable from prb_setup_retire_blk_timer()
Jesper Juhl [Mon, 14 Nov 2011 05:09:21 +0000 (00:09 -0500)]
net/packet: remove dead code and unneeded variable from prb_setup_retire_blk_timer()

We test for 'tx_ring' being != zero and BUG() if that's the case. So after
that check there is no way that 'tx_ring' could be anything _but_ zero, so
testing it again is just dead code. Once that dead code is removed, the
'pkc' local variable becomes entirely redundant, so remove that as well.

Signed-off-by: Jesper Juhl <>
Signed-off-by: David S. Miller <>
10 years agoah: Don't return NET_XMIT_DROP on input.
Nick Bowler [Thu, 10 Nov 2011 09:01:27 +0000 (09:01 +0000)]
ah: Don't return NET_XMIT_DROP on input.

When the ahash driver returns -EBUSY, AH4/6 input functions return
NET_XMIT_DROP, presumably copied from the output code path.  But
returning transmit codes on input doesn't make a lot of sense.
Since NET_XMIT_DROP is a positive int, this gets interpreted as
the next header type (i.e., success).  As that can only end badly,
remove the check.

Signed-off-by: Nick Bowler <>
Signed-off-by: David S. Miller <>
10 years agoMerge branch 'master' of git://
John W. Linville [Fri, 11 Nov 2011 16:34:47 +0000 (11:34 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem

10 years agomwifiex: fix association issue with AP configured in hidden SSID mode
Amitkumar Karwar [Thu, 10 Nov 2011 05:36:21 +0000 (21:36 -0800)]
mwifiex: fix association issue with AP configured in hidden SSID mode

Firmware expects 'max_ssid_length' field in
'struct mwifiex_ie_types_wildcard_ssid_params' to be '0' for
performing SSID specific scan. Currently driver updates it with
an actual SSID length. Hence UUT is not able to find the AP
configured in hidden SSID mode in scan results and association

max_ssid_length is filled with '0' to fix the issue.

Signed-off-by: Amitkumar Karwar <>
Signed-off-by: Bing Zhao <>
Signed-off-by: John W. Linville <>
10 years agoiwlwifi: avoid a panic when unloading the module with RF Kill
Emmanuel Grumbach [Thu, 10 Nov 2011 00:50:50 +0000 (16:50 -0800)]
iwlwifi: avoid a panic when unloading the module with RF Kill

When HW RF kill switch is set to kill the radio, our NIC issues an
interrupt after we stop the APM module. When we unload the module,
the driver disables and cleans the interrupts before stopping the
APM. So we have a real interrupt (inta not zero) pending.
When this interrupts pops up the tasklet has already been killed
and we crash.

Here is a logical description of the flow:

disable and clean interrupts
synchronize interrupts
kill the tasklet

stop the APM <<== creates an RF kill interrupt

free_irq <<== somehow our ISR is called here and we crash

Here is the panic message:

[  201.313636] BUG: unable to handle kernel paging request at ffff8800911b7150
[  201.314541] IP: [<ffffffff8106d652>] tasklet_action+0x62/0x130
[  201.315149] PGD 1c06063 PUD db37f067 PMD db408067 PTE 80000000911b7160
[  201.316456] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[  201.317324] CPU 1
[  201.317495] Modules linked in: arc4 iwlwifi(-) mac80211 cfg80211 netconsole configfs binfmt_misc i915 drm_kms_helper drm uvcvideo i2c_algo_bit videodev dell_laptop dcdbas intel_agp dell_wmi intel_ips psmouse intel_gtt v4l2_compat_ioctl32 asix usbnet mii serio_raw video sparse_keymap firewire_ohci sdhci_pci sdhci firewire_core e1000e crc_itu_t [last unloaded: configfs]
[  201.323839]
[  201.324015] Pid: 2061, comm: modprobe Not tainted 3.1.0-rc9-wl #4 Dell Inc. Latitude E6410/0667CC
[  201.324736] RIP: 0010:[<ffffffff8106d652>]  [<ffffffff8106d652>] tasklet_action+0x62/0x130
[  201.325128] RSP: 0018:ffff88011bc43ea0  EFLAGS: 00010286
[  201.325338] RAX: ffff88008ae70000 RBX: ffff8800911b7150 RCX: ffff88008ae70028
[  201.325555] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88008ae70000
[  201.325775] RBP: ffff88011bc43ec0 R08: 0000000000000000 R09: 0000000000000000
[  201.325994] R10: 0000000000000002 R11: 0000000000000001 R12: 0000000000000001
[  201.326212] R13: 0000000000000006 R14: 0000000000000100 R15: ffff88008e259fd8
[  201.326431] FS:  00007f4b90ea9700(0000) GS:ffff88011bc40000(0000) knlGS:0000000000000000
[  201.326657] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  201.326864] CR2: ffff8800911b7150 CR3: 000000008fd6d000 CR4: 00000000000006e0
[  201.327083] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  201.327302] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  201.327521] Process modprobe (pid: 2061, threadinfo ffff88008e258000, task ffff88008ae70000)
[  201.327747] Stack:
[  201.330494]  0000000000000046 0000000000000030 0000000000000001 0000000000000006
[  201.333870]  ffff88011bc43f30 ffffffff8106cd8a ffffffff811e1016 ffff88011bc43f08
[  201.337186]  0000000100000046 ffff88008e259fd8 0000000a10be2160 0000000000000006
[  201.340458] Call Trace:
[  201.342994]  <IRQ>
[  201.345656]  [<ffffffff8106cd8a>] __do_softirq+0xca/0x250
[  201.348185]  [<ffffffff811e1016>] ? pde_put+0x76/0x90
[  201.350730]  [<ffffffff8131aeae>] ? do_raw_spin_unlock+0x5e/0xb0
[  201.353261]  [<ffffffff811e1016>] ? pde_put+0x76/0x90
[  201.355776]  [<ffffffff8163ccfc>] call_softirq+0x1c/0x30
[  201.358287]  [<ffffffff8101531d>] do_softirq+0x9d/0xd0
[  201.360823]  [<ffffffff8106cb05>] irq_exit+0xd5/0xf0
[  201.363330]  [<ffffffff8163d5d6>] do_IRQ+0x66/0xe0
[  201.365819]  [<ffffffff81632673>] common_interrupt+0x73/0x73
[  201.368257]  <EOI>

Cc: <> 3.1+
Signed-off-by: Emmanuel Grumbach <>
Signed-off-by: Wey-Yi Guy <>
Signed-off-by: John W. Linville <>
10 years agonet: Fix references to deleted NET_ETHERNET Kconfig setting.
David S. Miller [Wed, 9 Nov 2011 05:14:11 +0000 (00:14 -0500)]
net: Fix references to deleted NET_ETHERNET Kconfig setting.

Change them over to plain "ETHERNET"

Reported-by: Paul Bolle <>
Signed-off-by: David S. Miller <>
Acked-by: Jeff Kirsher <>
10 years agoMerge branch 'for-davem' of git://
David S. Miller [Wed, 9 Nov 2011 21:22:15 +0000 (16:22 -0500)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless

10 years agoipv4: fix for ip_options_rcv_srr() daddr update.
Li Wei [Tue, 8 Nov 2011 21:39:28 +0000 (21:39 +0000)]
ipv4: fix for ip_options_rcv_srr() daddr update.

When opt->srr_is_hit is set skb_rtable(skb) has been updated for
'nexthop' and iph->daddr should always equals to skb_rtable->rt_dst
holds, We need update iph->daddr either.

Signed-off-by: Li Wei <>
Signed-off-by: David S. Miller <>
10 years agoah: Read nexthdr value before overwriting it in ahash input callback.
Nick Bowler [Tue, 8 Nov 2011 12:12:45 +0000 (12:12 +0000)]
ah: Read nexthdr value before overwriting it in ahash input callback.

The AH4/6 ahash input callbacks read out the nexthdr field from the AH
header *after* they overwrite that header.  This is obviously not going
to end well.  Fix it up.

Signed-off-by: Nick Bowler <>
Signed-off-by: David S. Miller <>
10 years agoah: Correctly pass error codes in ahash output callback.
Nick Bowler [Tue, 8 Nov 2011 12:12:44 +0000 (12:12 +0000)]
ah: Correctly pass error codes in ahash output callback.

The AH4/6 ahash output callbacks pass nexthdr to xfrm_output_resume
instead of the error code.  This appears to be a copy+paste error from
the input case, where nexthdr is expected.  This causes the driver to
continuously add AH headers to the datagram until either an allocation
fails and the packet is dropped or the ahash driver hits a synchronous
fallback and the resulting monstrosity is transmitted.

Correct this issue by simply passing the error code unadulterated.

Signed-off-by: Nick Bowler <>
Signed-off-by: David S. Miller <>
10 years agonet: drivers/net/hippi/Kconfig should be sourced
Paul Bolle [Tue, 8 Nov 2011 10:31:10 +0000 (10:31 +0000)]
net: drivers/net/hippi/Kconfig should be sourced

Commit ff5a3b509e ("hippi: Move the HIPPI driver") moved the HIPPI
driver into drivers/net/hippi. It didn't source
drivers/net/hippi/Kconfig though, so it didn't make all necessary
Kconfig changes. So let drivers/net/kconfig source HIPPI's Kconfig file.

[ Fix syntax error at the end of HIPP's Kconfig file. -DaveM ]

Signed-off-by: Paul Bolle <>
Acked-by: Jeff Kirsher <>
Signed-off-by: David S. Miller <>
10 years agonet/ll_temac: FIX : Wait for indirect wait to end
Ricardo Ribalda [Mon, 7 Nov 2011 23:39:57 +0000 (23:39 +0000)]
net/ll_temac: FIX : Wait for indirect wait to end

While tracing down a connectivity problem on the temac I connected a
probe to the Cross bar irq, and it was triggered when doing

This is fixed once waiting for the indirect write to end. Since it is
not on the hot path there is no performance loss.

Signed-off-by: Ricardo Ribalda Delgado <>
Signed-off-by: David S. Miller <>
10 years agonet/temac: FIX segfault when process old irqs
Ricardo Ribalda [Mon, 7 Nov 2011 23:31:58 +0000 (23:31 +0000)]
net/temac: FIX segfault when process old irqs

Do not enable the irq until the scatter gather registers are ready to
handle the data. Otherwise an irq from a packet send/received before
last close can lead to an access to an invalid memory region on the irq

Also, stop the dma engine on close.

Signed-off-by: Ricardo Ribalda Delgado <>
Signed-off-by: David S. Miller <>
10 years agomac80211: fix race between connection monitor & suspend
Johannes Berg [Wed, 9 Nov 2011 11:14:16 +0000 (12:14 +0100)]
mac80211: fix race between connection monitor & suspend

When the connection monitor timer fires right before
suspend, the following will happen:
 timer fires -> monitor_work gets queued
 suspend calls ieee80211_sta_quiesce
  - deletes timer
  - cancels monitor_work synchronously, running it
  [note wrong order of these steps]
 monitor_work runs, re-arming the timer
 later, timer fires while system should be quiesced

This causes a warning:

WARNING: at net/mac80211/util.c:540 ieee80211_can_queue_work+0x35/0x40 [mac80211]()

but is otherwise harmless. I'm not completely sure
this is the scenario Thomas stumbled across, but it
is the only way I can right now see the warning in
a scenario like the one he reported.

Reported-by: Thomas Meyer <>
Signed-off-by: Johannes Berg <>
Signed-off-by: John W. Linville <>
10 years agowireless: libertas: fix unaligned le64 accesses
Steven Miao [Wed, 9 Nov 2011 08:30:40 +0000 (16:30 +0800)]
wireless: libertas: fix unaligned le64 accesses

use get_unaligned_le64() to get timestamp

Signed-off-by: Steven Miao <>
Acked-by: Dan Williams <>
Signed-off-by: John W. Linville <>
10 years agocfg80211: fix bug on regulatory core exit on access to last_request
Luis R. Rodriguez [Tue, 8 Nov 2011 22:28:06 +0000 (14:28 -0800)]
cfg80211: fix bug on regulatory core exit on access to last_request

Commit 4d9d88d1 by Scott James Remnant <> added
the .uevent() callback for the regulatory device used during
the platform device registration. The change was done to account
for queuing up udev change requests through udevadm triggers.
The change also meant that upon regulatory core exit we will now
send a uevent() but the uevent() callback, reg_device_uevent(),
also accessed last_request. Right before commiting device suicide
we free'd last_request but never set it to NULL so
platform_device_unregister() would lead to bogus kernel paging
request. Fix this and also simply supress uevents right before
we commit suicide as they are pointless.

This fix is required for kernels >= v2.6.39

$ git describe --contains 4d9d88d1

The impact of not having this present is that a bogus paging
access may occur (only read) upon cfg80211 unload time. You
may also get this BUG complaint below. Although Johannes
could not reproduce the issue this fix is theoretically correct.

mac80211_hwsim: unregister radios
mac80211_hwsim: closing netlink
BUG: unable to handle kernel paging request at ffff88001a06b5ab
IP: [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211]
PGD 1836063 PUD 183a063 PMD 1ffcb067 PTE 1a06b160
Modules linked in: cfg80211(-) [last unloaded: mac80211]

Pid: 2279, comm: rmmod Tainted: G        W   3.1.0-wl+ #663 Bochs Bochs
RIP: 0010:[<ffffffffa030df9a>]  [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211]
RSP: 0000:ffff88001c5f9d58  EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff88001d2eda88 RCX: ffff88001c7468fc
RDX: ffff88001a06b5a0 RSI: ffff88001c7467b0 RDI: ffff88001c7467b0
RBP: ffff88001c5f9d58 R08: 000000000000ffff R09: 000000000000ffff
R10: 0000000000000000 R11: 0000000000000001 R12: ffff88001c7467b0
R13: ffff88001d2eda78 R14: ffffffff8164a840 R15: 0000000000000001
FS:  00007f8a91d8a6e0(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff88001a06b5ab CR3: 000000001c62e000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process rmmod (pid: 2279, threadinfo ffff88001c5f8000, task ffff88000023c780)
 ffff88001c5f9d98 ffffffff812ff7e5 ffffffff8176ab3d ffff88001c7468c2
 000000000000ffff ffff88001d2eda88 ffff88001c7467b0 ffff880000114820
 ffff88001c5f9e38 ffffffff81241dc7 ffff88001c5f9db8 ffffffff81040189
Call Trace:
 [<ffffffff812ff7e5>] dev_uevent+0xc5/0x170
 [<ffffffff81241dc7>] kobject_uevent_env+0x1f7/0x490
 [<ffffffff81040189>] ? sub_preempt_count+0x29/0x60
 [<ffffffff814cab1a>] ? _raw_spin_unlock_irqrestore+0x4a/0x90
 [<ffffffff81305307>] ? devres_release_all+0x27/0x60
 [<ffffffff8124206b>] kobject_uevent+0xb/0x10
 [<ffffffff812fee27>] device_del+0x157/0x1b0
 [<ffffffff8130377d>] platform_device_del+0x1d/0x90
 [<ffffffff81303b76>] platform_device_unregister+0x16/0x30
 [<ffffffffa030fffd>] regulatory_exit+0x5d/0x180 [cfg80211]
 [<ffffffffa032bec3>] cfg80211_exit+0x2b/0x45 [cfg80211]
 [<ffffffff8109a84c>] sys_delete_module+0x16c/0x220
 [<ffffffff8108a23e>] ? trace_hardirqs_on_caller+0x7e/0x120
 [<ffffffff814cba02>] system_call_fastpath+0x16/0x1b
Code: <all your base are belong to me>
RIP  [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211]
 RSP <ffff88001c5f9d58>
CR2: ffff88001a06b5ab
---[ end trace 147c5099a411e8c0 ]---

Reported-by: Johannes Berg <>
Cc: Scott James Remnant <>
Signed-off-by: Luis R. Rodriguez <>
Signed-off-by: John W. Linville <>
10 years agomac80211: fix bug in ieee80211_build_probe_req
Johannes Berg [Tue, 8 Nov 2011 12:04:41 +0000 (13:04 +0100)]
mac80211: fix bug in ieee80211_build_probe_req

ieee80211_probereq_get() can return NULL in
which case we should clean up & return NULL
in ieee80211_build_probe_req() as well.

Signed-off-by: Johannes Berg <>
Signed-off-by: John W. Linville <>
10 years agomac80211: fix NULL dereference in radiotap code
Johannes Berg [Tue, 8 Nov 2011 11:28:33 +0000 (12:28 +0100)]
mac80211: fix NULL dereference in radiotap code

When receiving failed PLCP frames is enabled, there
won't be a rate pointer when we add the radiotap
header and thus the kernel will crash. Fix this by
not assuming the rate pointer is always valid. It's
still always valid for frames that have good PLCP
though, and that is checked & enforced.

This was broken by my
commit fc88518916793af8ad6a02e05ff254d95c36d875
Author: Johannes Berg <>
Date:   Fri Jul 30 13:23:12 2010 +0200

    mac80211: don't check rates on PLCP error frames

where I removed the check in this case but didn't
take into account that the rate info would be used.

Reported-by: Xiaokang Qin <>
Signed-off-by: Johannes Berg <>
Signed-off-by: John W. Linville <>
10 years agoMerge branch 'master' of ssh://
John W. Linville [Wed, 9 Nov 2011 18:41:11 +0000 (13:41 -0500)]
Merge branch 'master' of ssh://ra./linux/kernel/git/linville/wireless into for-davem

10 years agowl12xx: fix wl12xx_scan_sched_scan_ssid_list() check that all given ssids are in...
Eyal Shapira [Tue, 8 Nov 2011 13:54:46 +0000 (15:54 +0200)]
wl12xx: fix wl12xx_scan_sched_scan_ssid_list() check that all given ssids are in filters

A minor fix for the check that verifies that all given SSIDs (in req) exist
in the filters (the match sets)

Signed-off-by: Eyal Shapira <>
Acked-by: Luciano Coelho <>
Signed-off-by: John W. Linville <>
10 years agoath: Fix NULL ptr dereference in ath_reg_apply_world_flags
Helmut Schaa [Tue, 8 Nov 2011 13:01:13 +0000 (14:01 +0100)]
ath: Fix NULL ptr dereference in ath_reg_apply_world_flags

This happens with devices using a regulatory domain 0x68 that are only
5Ghz capable because ath_reg_apply_active_scan_flags assumes that we
always have a 2,4Ghz band.

CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 82cd838c, ra == 82cd8384
Cpu 0
$ 0 : 00000000 00000061 00000003 00000024
$ 4 : 00000003 000016c1 82f900ac 00000024
$ 8 : 00000000 82cda304 0058bad8 00000005
$12 : 005908f8 001e8481 00000003 1dcd6500
$16 : 00000002 00000000 82c700c0 82c700c0
$20 : 82d415e4 82c70d64 82c70200 82c715bc
$24 : 00000000 11e1a300
$28 : 82ce2000 82ce3c70 82c715a8 82cd8384
Hi : 00000000
Lo : 0000001e
epc : 82cd838c ath_reg_apply_world_flags+0x78/0x17c [ath]
Not tainted
ra : 82cd8384 ath_reg_apply_world_flags+0x70/0x17c [ath]
Status: 1000d403 KERNEL EXL IE
Cause : 80800008
BadVA : 00000000
PrId : 00019374 (MIPS 24Kc)
Modules linked in: ath9k(+) ath9k_common ath9k_hw ath mac80211 cfg80211
compat_firmware_class compat arc4 aes_generic deflate ecb cbc
leds_gpio button_hotplug gpio_buttons input_polldev ie
Process insmod (pid: 464, threadinfo=82ce2000, task=838b31d8, tls=00000000)
Stack : 00000000 00000002 82f900ac 82c700c0 82d415e4 82c70d64 00000000 00000068
82f900ac 82cd88f4 82c700c0 82cda304 00000001 000020f0 82f90000 82c70d40
00000002 82f90000 82f900ac 82d4207c 82d518a0 00000002 7fee6118 8017c0d8
00000008 8397ba00 82c70d40 00000000 82c70200 83813000 83813058 b0010000
82d518a0 00000002 7fee6118 82d4b8c8 83445cc0 80120dc0 83804000 800eeda0
Call Trace:
[<82cd838c>] ath_reg_apply_world_flags+0x78/0x17c [ath]
[<82cd88f4>] ath_regd_init+0x464/0x488 [ath]
[<82d4207c>] ath9k_init_device+0x6a4/0x6b4 [ath9k]
[<82d4b8c8>] ath_pci_probe+0x27c/0x358 [ath9k]
[<80181de0>] pci_device_probe+0x64/0xa4
[<8019e874>] driver_probe_device+0xb8/0x190
[<8019e9b8>] __driver_attach+0x6c/0xa4
[<8019dfc0>] bus_for_each_dev+0x60/0xb0
[<8019d744>] bus_add_driver+0xc4/0x25c
[<8019ed6c>] driver_register+0xe0/0x198
[<8018206c>] __pci_register_driver+0x50/0xe0
[<82dd0010>] ath9k_init+0x10/0x54 [ath9k]
[<8006b4a0>] do_one_initcall+0x68/0x1ec
[<800a901c>] sys_init_module+0xec/0x23c
[<80062544>] stack_done+0x20/0x3c

Signed-off-by: Helmut Schaa <>
Signed-off-by: John W. Linville <>
10 years agocfg80211: fix missing kernel-doc
Johannes Berg [Tue, 8 Nov 2011 08:20:07 +0000 (09:20 +0100)]
cfg80211: fix missing kernel-doc

Two new struct members were not documented, fix that.

Signed-off-by: Johannes Berg <>
Signed-off-by: John W. Linville <>
10 years agoMerge branch 'master' of git://
John W. Linville [Tue, 8 Nov 2011 19:59:14 +0000 (14:59 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/padovan/bluetooth

10 years agoipv4: Fix inetpeer expire time information
Steffen Klassert [Tue, 11 Oct 2011 01:12:02 +0000 (01:12 +0000)]
ipv4: Fix inetpeer expire time information

As we update the learned pmtu informations on demand, we might
report a nagative expiration time value to userspace if the
pmtu informations are already expired and we have not send a
packet to that inetpeer after expiration. With this patch we
send a expire time of null to userspace after expiration
until the next packet is send to that inetpeer.

Signed-off-by: Steffen Klassert <>
Signed-off-by: David S. Miller <>
10 years agonet: min_pmtu default is 552
Eric Dumazet [Tue, 8 Nov 2011 19:21:44 +0000 (14:21 -0500)]
net: min_pmtu default is 552

Small fix in Documentation, since min_pmtu is 512 + 20 + 20 = 552

Signed-off-by: Eric Dumazet <>
Signed-off-by: David S. Miller <>
10 years agotcp: Fix comments for Nagle algorithm
Feng King [Sat, 5 Nov 2011 04:23:23 +0000 (04:23 +0000)]
tcp: Fix comments for Nagle algorithm

TCP_NODELAY is weaker than TCP_CORK, when TCP_CORK was set, small
segments will always pass Nagle test regardless of TCP_NODELAY option.

Signed-off-by: Feng King <>
Signed-off-by: David S. Miller <>
10 years agosunhme: Allow usage on SBI based SBus systems
oftedal [Mon, 7 Nov 2011 11:47:53 +0000 (11:47 +0000)]
sunhme: Allow usage on SBI based SBus systems

To prevent the SBus driver for Sun Happy Meal cards from being loaded for
PCI cards utilizing the same chipset, a filter was added to the probe
function in commit 0b492fce3d72d982a7981905f85484a1e1ba7fde.

The filter was implemented by checking the name of the parent node in
the OF tree. This patch extends this filter, so that the driver will
load on SBus systems that are based upon SBI SBus Bridges.

Signed-off-by: Kjetil Oftedal <>
Signed-off-by: David S. Miller <>
10 years agol2tp: fix l2tp_udp_recv_core()
Eric Dumazet [Tue, 8 Nov 2011 18:59:44 +0000 (13:59 -0500)]
l2tp: fix l2tp_udp_recv_core()

pskb_may_pull() can change skb->data, so we have to load ptr/optr at the
right place.

Signed-off-by: Eric Dumazet <>
Signed-off-by: David S. Miller <>
10 years agoFix incorrect usage of NET_IP_ALIGN
Nico Erfurth [Tue, 8 Nov 2011 07:30:40 +0000 (07:30 +0000)]
Fix incorrect usage of NET_IP_ALIGN

The driver used NET_IP_ALIGN to remove some additional padding inside of
the rx_fixup function. On many architectures NET_IP_ALIGN defaults to 2
which removed the correct amount of bytes.

On MCORE2-machines commit ea812ca1b06113597adcd8e70c0f84a413d97544
introduces a change which sets NET_IP_ALIGN to 0 by default. Which
triggered the bug on these machines.

This fix introduces a new RXW_PADDING define and uses this instead of
NET_IP_ALIGN. The name was taken from the original SMSC7500 driver which
is provided by SMSC.

Signed-off-by: Nico Erfurth <>
Tested-by: Phil Sutter <>
Signed-off-by: David S. Miller <>
10 years agoipv6: drop packets when source address is multicast
Brian Haley [Tue, 8 Nov 2011 04:41:42 +0000 (04:41 +0000)]
ipv6: drop packets when source address is multicast

RFC 4291 Section 2.7 says Multicast addresses must not be used as source
addresses in IPv6 packets - drop them on input so we don't process the
packet further.

Signed-off-by: Brian Haley <>
Reported-and-Tested-by: Kumar Sanghvi <>
Signed-off-by: David S. Miller <>
10 years agor8169: increase the delay parameter of pm_schedule_suspend
hayeswang [Mon, 7 Nov 2011 20:44:37 +0000 (20:44 +0000)]
r8169: increase the delay parameter of pm_schedule_suspend

The link down would occur when reseting PHY. And it would take about 2 ~ 5 seconds
from link down to link up. If the delay of pm_schedule_suspend is not long enough,
the device would enter runtime_suspend before link up. After link up, the device
would wake up and reset PHY again. Then, you would find the driver keep in a loop
of runtime_suspend and rumtime_resume.

Signed-off-by: Hayes Wang <>
Acked-by: Francois Romieu <>
Signed-off-by: David S. Miller <>
10 years agoBluetooth: Add support for Broadcom BCM20702A0
Wen-chien Jesse Sung [Tue, 8 Nov 2011 06:30:22 +0000 (14:30 +0800)]
Bluetooth: Add support for Broadcom BCM20702A0

Since this device declares itself as vendor specific, must add
a new entry to device ID table to support it.

usb-device output of this device:

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=413c ProdID=8197 Rev=01.12
S:  Manufacturer=Broadcom Corp
S:  Product=BCM20702A0
S:  SerialNumber=D0DF9AA9C9F1
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Signed-off-by: Wen-chien Jesse Sung <>
Signed-off-by: Gustavo F. Padovan <>
10 years agoLinux 3.2-rc1 v3.2-rc1
Linus Torvalds [Tue, 8 Nov 2011 00:16:02 +0000 (16:16 -0800)]
Linux 3.2-rc1

.. with new name.  Because nothing says "really solid kernel release"
like naming it after an extinct animal that just happened to be in the
news lately.

10 years agoMerge branch 'fixes' of git://
Linus Torvalds [Tue, 8 Nov 2011 00:14:26 +0000 (16:14 -0800)]
Merge branch 'fixes' of git://git./linux/kernel/git/tmlind/linux-omap

* 'fixes' of git:// (31 commits)
  ARM: OMAP: Fix export.h or module.h includes
  ARM: OMAP: omap_device: Include linux/export.h
  ARM: OMAP2: Fix H4 matrix keyboard warning
  ARM: OMAP1: Remove unused omap-alsa.h
  ARM: OMAP1: Fix warnings about enabling 32 KiHz timer
  ARM: OMAP2+: timer: Remove omap_device_pm_latency
  ARM: OMAP2+: clock data: Remove redundant timer clkdev
  ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio
  ARM: OMAP: usb: musb: OMAP: Delete unused function
  MAINTAINERS: Update linux-omap git repository
  ARM: OMAP: change get_context_loss_count ret value to int
  ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly
  ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF
  ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list
  ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success
  ARM: OMAP: dmtimer: Include linux/module.h
  ARM: OMAP2+: l3-noc: Include linux/module.h
  ARM: OMAP2+: devices: Fixes for McPDM
  ARM: OMAP: Fix errors and warnings when building for one board
  ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only

10 years agoVFS: we need to set LOOKUP_JUMPED on mountpoint crossing
Al Viro [Mon, 7 Nov 2011 21:21:26 +0000 (21:21 +0000)]
VFS: we need to set LOOKUP_JUMPED on mountpoint crossing

Mountpoint crossing is similar to following procfs symlinks - we do
not get ->d_revalidate() called for dentry we have arrived at, with
unpleasant consequences for NFS4.

Simple way to reproduce the problem in mainline:

    cat >/tmp/a.c <<'EOF'
    #include <unistd.h>
    #include <fcntl.h>
    #include <stdio.h>
            struct flock fl = {.l_type = F_RDLCK, .l_whence = SEEK_SET, .l_len = 1};
            if (fcntl(0, F_SETLK, &fl))
    cc /tmp/a.c -o /tmp/test

then on nfs4:

    mount --bind file1 file2
    /tmp/test < file1 # ok
    /tmp/test < file2 # spews "setlk: No locks available"...

What happens is the missing call of ->d_revalidate() after mountpoint
crossing and that's where NFS4 would issue OPEN request to server.

The fix is simple - treat mountpoint crossing the same way we deal with
following procfs-style symlinks.  I.e.  set LOOKUP_JUMPED...

Signed-off-by: Al Viro <>
Signed-off-by: Linus Torvalds <>
10 years agoMerge branch 'perf-urgent-for-linus' of git://
Linus Torvalds [Mon, 7 Nov 2011 20:38:11 +0000 (12:38 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'perf-urgent-for-linus' of git://
  perf top: Fix live annotation in the --stdio interface
  perf top tui: Don't recalc column widths considering just the first page
  perf report: Add progress bar when processing time ordered events
  perf hists browser: Warn about lost events
  perf tools: Fix a typo of command name as trace-cmd
  perf hists: Fix recalculation of total_period when sorting entries
  perf header: Fix build on old systems
  perf ui browser: Handle K_RESIZE in dialog windows
  perf ui browser: No need to switch char sets that often
  perf hists browser: Use K_TIMER
  perf ui: Rename ui__warning_paranoid to ui__error_paranoid
  perf ui: Reimplement the popup windows using libslang
  perf ui: Reimplement ui__popup_menu using ui__browser
  perf ui: Reimplement ui_helpline using libslang
  perf ui: Improve handling sigwinch a bit
  perf ui progress: Reimplement using slang
  perf evlist: Fix grouping of multiple events

10 years agoMerge branch 'fixes-modulesplit' into fixes
Tony Lindgren [Mon, 7 Nov 2011 20:27:23 +0000 (12:27 -0800)]
Merge branch 'fixes-modulesplit' into fixes

10 years agoARM: OMAP: Fix export.h or module.h includes
Tony Lindgren [Mon, 7 Nov 2011 20:27:10 +0000 (12:27 -0800)]
ARM: OMAP: Fix export.h or module.h includes

Commit 32aaeffbd4a7457bf2f7448b33b5946ff2a960eb (Merge branch
'modsplit-Oct31_2011'...) caused some build errors. Fix these
and make sure we always have export.h or module.h included
for MODULE_ and EXPORT_SYMBOL users:

$ grep -rl ^MODULE_ arch/arm/*omap*/*.c | xargs \
  grep -L linux/module.h

Also check we either have export.h or module.h included
for the files exporting symbols:

$ grep -rl EXPORT_SYMBOL arch/arm/*omap*/*.c | xargs \
  grep -L linux/export.h | xargs grep -L linux/module.h

Cc: Russell King <>
Signed-off-by: Tony Lindgren <>
10 years agoARM: OMAP: omap_device: Include linux/export.h
Axel Lin [Mon, 7 Nov 2011 20:27:10 +0000 (12:27 -0800)]
ARM: OMAP: omap_device: Include linux/export.h

Include linux/export.h to fix below build warning:

  CC      arch/arm/plat-omap/omap_device.o
arch/arm/plat-omap/omap_device.c:1055: warning: data definition has no type or storage class
arch/arm/plat-omap/omap_device.c:1055: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'
arch/arm/plat-omap/omap_device.c:1055: warning: parameter names (without types) in function declaration

Signed-off-by: Axel Lin <>
Signed-off-by: Tony Lindgren <>
10 years agoBluetooth: Use miliseconds for L2CAP channel timeouts
Andrzej Kaczmarek [Mon, 7 Nov 2011 19:19:04 +0000 (17:19 -0200)]
Bluetooth: Use miliseconds for L2CAP channel timeouts

Timers set by __set_chan_timer() should use miliseconds instead of
jiffies. Commit 942ecc9c4643db5ce071562e0a23f99464d6b461 updated
l2cap_set_timer() so it expects timeout to be specified in msecs
instead of jiffies. This makes timeouts unreliable when CONFIG_HZ
is not set to 1000.

Signed-off-by: Andrzej Kaczmarek <>
Signed-off-by: Gustavo F. Padovan <>
10 years agoMerge git://
Linus Torvalds [Mon, 7 Nov 2011 18:55:33 +0000 (10:55 -0800)]
Merge git://git./linux/kernel/git/davem/net

* git:// (47 commits)
  forcedeth: fix a few sparse warnings (variable shadowing)
  forcedeth: Improve stats counters
  forcedeth: remove unneeded stats updates
  forcedeth: Acknowledge only interrupts that are being processed
  forcedeth: fix race when unloading module
  MAINTAINERS/rds: update maintainer
  wanrouter: Remove kernel_lock annotations
  usbnet: fix oops in usbnet_start_xmit
  ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined
  etherh: Add MAINTAINERS entry for etherh
  bonding: comparing a u8 with -1 is always false
  sky2: fix regression on Yukon Optima
  netlink: clarify attribute length check documentation
  netlink: validate NLA_MSECS length
  i825xx:xscale:8390:freescale: Fix Kconfig dependancies
  macvlan: receive multicast with local address
  tg3: Update version to 3.121
  tg3: Eliminate timer race with reset_task
  tg3: Schedule at most one tg3_reset_task run
  tg3: Obtain PCI function number from device

10 years agovfs: d_invalidate() should leave mountpoints alone
Al Viro [Mon, 7 Nov 2011 16:39:57 +0000 (16:39 +0000)]
vfs: d_invalidate() should leave mountpoints alone

Signed-off-by: Al Viro <>
Signed-off-by: Linus Torvalds <>
10 years agoBluetooth: Revert: Fix L2CAP connection establishment
Arek Lichwa [Wed, 26 Oct 2011 09:23:22 +0000 (11:23 +0200)]
Bluetooth: Revert: Fix L2CAP connection establishment

This reverts commit 330605423ca6eafafb8dcc27502bce1c585d1b06.
The commit introduces regression when two 2.1 devices attempt
establish rfcomm channel. Such connection is refused since there's
a security block issue on l2cap. It means the link is unencrypted.

2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24
    0000: 14 00 40 00 06 00 02 00  0f 35 03 19 12 00 ff ff
    0010: 35 05 0a 00 00 ff ff 00                           5....˙˙.
2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets
(0x13) plen 5
    handle 1 packets 1
2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88
    L2CAP(d): cid 0x0040 len 84 [psm 0]
      0000: 07 00 02 00 4f 00 4c 35  4a 35 48 09 00 00 0a 00
      0010: 01 00 00 09 00 01 35 03  19 12 00 09 00 05 35 03
      0020: 19 10 02 09 00 09 35 08  35 06 19 12 00 09 01 02
      0030: 09 02 00 09 01 02 09 02  01 09 00 0a 09 02 02 09
      0040: 00 00 09 02 03 09 00 00  09 02 04 28 01 09 02 05
      0050: 09 00 02 00                                       ....
2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested
(0x01|0x0011) plen 2
    handle 1
2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen 4
    Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17) plen 6
    bdaddr 00:00:F2:6A:29:69
2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply
(0x01|0x000b) plen 22
    bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532
2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e) plen 10
    Link Key Request Reply (0x01|0x000b) ncmd 1
    status 0x00 bdaddr 00:00:F2:6A:29:69
2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3
    status 0x00 handle 1
2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12
    0000: 08 00 01 00 02 05 04 00  03 00 41 00              ..........A.
2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen 4
    Unknown (0x00|0x0000) status 0x00 ncmd 2
2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets
(0x13) plen 5
    handle 1 packets 1
2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status 0
      Connection refused - security block
2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12
    0000: 08 00 01 00 06 06 04 00  40 00 40 00              ........@.@.
2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets
(0x13) plen 5
    handle 1 packets 1
2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006) plen
    handle 1 reason 0x13
    Reason: Remote User Terminated Connection
2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen 4
    Disconnect (0x01|0x0006) status 0x00 ncmd 1
2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05) plen 4
    status 0x00 handle 1 reason 0x16
    Reason: Connection Terminated by Local Host

Signed-off-by: Arek Lichwa <>
Signed-off-by: Gustavo F. Padovan <>
10 years agoforcedeth: fix a few sparse warnings (variable shadowing)
david decotigny [Sat, 5 Nov 2011 14:38:24 +0000 (14:38 +0000)]
forcedeth: fix a few sparse warnings (variable shadowing)

This fixes the following sparse warnings:
drivers/net/ethernet/nvidia/forcedeth.c:2113:7: warning: symbol 'size' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here
drivers/net/ethernet/nvidia/forcedeth.c:2155:7: warning: symbol 'size' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here
drivers/net/ethernet/nvidia/forcedeth.c:2227:7: warning: symbol 'size' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here
drivers/net/ethernet/nvidia/forcedeth.c:2271:7: warning: symbol 'size' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here
drivers/net/ethernet/nvidia/forcedeth.c:2986:20: warning: symbol 'addr' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2963:6: originally declared here

Signed-off-by: David Decotigny <>
Signed-off-by: David S. Miller <>
10 years agoforcedeth: Improve stats counters
Mandeep Baines [Sat, 5 Nov 2011 14:38:23 +0000 (14:38 +0000)]
forcedeth: Improve stats counters

Rx byte count was off; instead use the hardware's count.  Tx packet
count was counting pre-TSO packets; instead count on-the-wire packets.
Report hardware dropped frame count as rx_fifo_errors.

- The count of transmitted packets reported by the forcedeth driver
  reports pre-TSO (TCP Segmentation Offload) packet counts and not the
  count of the number of packets sent on the wire. This change fixes
  the forcedeth driver to report the correct count. Fixed the code by
  copying the count stored in the NIC H/W to the value reported by the

- Count rx_drop_frame errors as rx_fifo_errors:
  We see a lot of rx_drop_frame errors if we disable the rx bottom-halves
  for too long.  Normally, rx_fifo_errors would be counted in this case.
  The rx_drop_frame error count is private to forcedeth and is not
  reported by ifconfig or sysfs.  The rx_fifo_errors count is currently
  unused in the forcedeth driver.  It is reported by ifconfig as overruns.
  This change reports rx_drop_frame errors as rx_fifo_errors.

Signed-off-by: David Decotigny <>
Signed-off-by: David S. Miller <>
10 years agoforcedeth: remove unneeded stats updates
david decotigny [Sat, 5 Nov 2011 14:38:22 +0000 (14:38 +0000)]
forcedeth: remove unneeded stats updates

Function ndo_get_stats() updates most of the stats from hardware
registers, making the manual updates un-needed. This change removes
these manual updates. Main exception is rx_missed_errors which needs
manual update.

Another exception is rx_packets, still updated manually in this commit
to make sure this patch doesn't change behavior of driver. This will
be addressed by a future patch.

Signed-off-by: David Decotigny <>
Signed-off-by: David S. Miller <>
10 years agoforcedeth: Acknowledge only interrupts that are being processed
Mike Ditto [Sat, 5 Nov 2011 14:38:21 +0000 (14:38 +0000)]
forcedeth: Acknowledge only interrupts that are being processed

This is to avoid a race, accidentally acknowledging an interrupt that
we didn't notice and won't immediately process.  This is based solely
on code inspection; it is not known if there was an actual bug here.

Signed-off-by: David Decotigny <>
Signed-off-by: David S. Miller <>
10 years agoforcedeth: fix race when unloading module
david decotigny [Sat, 5 Nov 2011 14:38:20 +0000 (14:38 +0000)]
forcedeth: fix race when unloading module

When forcedeth module is unloaded, there exists a path that can lead
to mod_timer() after del_timer_sync(), causing an oops. This patch
short-circuits this unneeded path, which originates in

  x86_64 16-way + 3 ethtool -S infinite loops + 100Mbps incoming traffic
  + rmmod/modprobe/ifconfig in a loop

Initial-Author: Salman Qazi <>

Signed-off-by: David Decotigny <>
Signed-off-by: David S. Miller <>
10 years agodevice-mapper: using EXPORT_SYBOL in dm-space-map-checker.c needs export.h
Stephen Rothwell [Tue, 1 Nov 2011 09:27:43 +0000 (20:27 +1100)]
device-mapper: using EXPORT_SYBOL in dm-space-map-checker.c needs export.h

Reported-by: Witold Baryluk <>
Signed-off-by: Stephen Rothwell <>
Signed-off-by: Paul Gortmaker <>
Signed-off-by: Linus Torvalds <>
10 years agodevice-mapper: dm-bufio.c needs to include module.h
Stephen Rothwell [Tue, 1 Nov 2011 07:30:49 +0000 (18:30 +1100)]
device-mapper: dm-bufio.c needs to include module.h

since it uses the module facilities.

Reported-by: Witold Baryluk <>
Signed-off-by: Stephen Rothwell <>
Signed-off-by: Paul Gortmaker <>
Signed-off-by: Linus Torvalds <>
10 years agodrivers/md: change module.h -> export.h in persistent-data/dm-*
Paul Gortmaker [Wed, 28 Sep 2011 22:29:32 +0000 (18:29 -0400)]
drivers/md: change module.h -> export.h in persistent-data/dm-*

For the files which are not themselves modular, we can change
them to include only the smaller export.h since all they are
doing is looking for EXPORT_SYMBOL.

Reported-by: Stephen Rothwell <>
Signed-off-by: Paul Gortmaker <>
Signed-off-by: Linus Torvalds <>
10 years agoarm: Add export.h to recently added files for EXPORT_SYMBOL
Paul Gortmaker [Sun, 9 Oct 2011 03:24:48 +0000 (23:24 -0400)]
arm: Add export.h to recently added files for EXPORT_SYMBOL

These files didn't exist at the time of the module.h split, and
so were not fixed by the commits on that baseline.  Since they use
the EXPORT_SYMBOL and/or THIS_MODULE macros, they will need the
new export.h file included that provides them.

Signed-off-by: Paul Gortmaker <>
Signed-off-by: Linus Torvalds <>
10 years agoMAINTAINERS/rds: update maintainer
Or Gerlitz [Mon, 7 Nov 2011 18:28:20 +0000 (13:28 -0500)]
MAINTAINERS/rds: update maintainer

update for the actual maintainer

Signed-off-by: Or Gerlitz <>
Signed-off-by: David S. Miller <>
10 years agowanrouter: Remove kernel_lock annotations
Richard Weinberger [Mon, 7 Nov 2011 18:27:30 +0000 (13:27 -0500)]
wanrouter: Remove kernel_lock annotations

The BKL is gone, these annotations are useless.

Signed-off-by: Richard Weinberger <>
Signed-off-by: David S. Miller <>
10 years agousbnet: fix oops in usbnet_start_xmit
Konstantin Khlebnikov [Mon, 7 Nov 2011 05:54:58 +0000 (05:54 +0000)]
usbnet: fix oops in usbnet_start_xmit

This patch fixes the bug added in commit v3.1-rc7-1055-gf9b491e
SKB can be NULL at this point, at least for cdc-ncm.

Signed-off-by: Konstantin Khlebnikov <>
Acked-by: Richard Cochran <>
Signed-off-by: David S. Miller <>
10 years agoixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined
Rose, Gregory V [Mon, 7 Nov 2011 07:44:17 +0000 (07:44 +0000)]
ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined

Fix compiler errors and warnings with CONFIG_PCI_IOV defined and not

Signed-off-by: Greg Rose <>
Signed-off-by: David S. Miller <>
10 years agomac80211: uAPSD - fix IEEE80211_FCTL_MOREDATA bit setting [Mon, 7 Nov 2011 07:47:47 +0000 (09:47 +0200)]
mac80211: uAPSD - fix IEEE80211_FCTL_MOREDATA bit setting

Set IEEE80211_FCTL_MOREDATA bit also in case we have buffered
frames (more than one) only for one AC.

Signed-off-by: Janusz Dziedzic <>
Reviewed-by: Johannes Berg <>
Signed-off-by: John W. Linville <>