[PATCH] m68knommu: use irq_handler_t for passing handler types in 68360 setup

Use irq_handler_t type for passing around timer interrupt routine.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] kexec: Use EFI_LOADER_DATA for ELF core header
  [IA64] permon use-after-free fix
  [IA64] sync compat getdents
  [IA64] always build arch/ia64/lib/xor.o
  [IA64] Remove stack hard limit on ia64
  [IA64] point saved_max_pfn to the max_pfn of the entire system
  Revert "[IA64] swiotlb abstraction (e.g. for Xen)"

Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] IP27: Build fix
  [MIPS] Wire up ioprio_set and ioprio_get.
  [MIPS] Fix __raw_read_trylock() to allow multiple readers
  [MIPS] Export __copy_user_inatomic.
  [MIPS] R2 bitops compile fix for gcc < 4.0.
  [MIPS] TX39: Remove redundant tx39_blast_icache() calls
  [MIPS] Cobalt: Fix early printk
  [MIPS] SMTC: De-obscure Malta hooks.
  [MIPS] SMTC: Add fordward declarations for mm_struct and task_struct.
  [MIPS] SMTC: <asm/mips_mt.h> must include <linux/cpumask.h>
  [MIPS] SMTC: <asm/smtc_ipi.h> must include <linux/spinlock.h>
  [MIPS] Atlas, Malta: Fix build warning.

[PATCH] minor updat to tlclk Kconfig entry

The tlclk driver is going on the MPCBL005 so I need to make the Kconfig
more more generic.  Just some text changes.

Signed-off-by: Mark Gross <mark.gross@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Fix buffer overflow in Omnikey CardMan 4040 driver (CVE-2007-0005)

Based on a patch from Don Howard <dhoward@redhat.com>

When calling write() with a buffer larger than 512 bytes, the
driver's write buffer overflows, allowing to overwrite the EIP and
execute arbitrary code with kernel privileges.

In read(), there exists a similar problem, but coming from the device.
A malicous or buggy device sending more than 512 bytes can overflow
of the driver's read buffer, with the same effects as above.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] suspend regression: sysfs deadlock

Suspend deadlocks when trying to unregister /sys/block/sr0.

This comes from Oliver's commit 94bebf4d1b8e7719f0f3944c037a21cfd99a4af7
"Driver core: fix race in sysfs between sysfs_remove_file() and
read()/write()".

sysfs_write_file downs buffer->sem while calling flush_write_buffer, and
flushing that particular write buffer entails downing buffer->sem in
orphan_all_buffers, resulting in the obvious self-deadlock.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of /linux/kernel/git/jikos/hid

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid:
  HID blacklisting of all Code Mercenaries IOWarrior devices

Merge branch 'linus' of /linux/kernel/git/perex/alsa

* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa:
  [ALSA] version 1.0.14rc3
  [ALSA] cmipci - Allow to disable integrated FM port
  [ALSA] hda-codec - Fix logic error in headphone mute for Conexant codecs
  [ALSA] hda-codec - Add missing Mic Boost for AD1986A codec
  [ALSA] ac97 - Add Thinkpad X31 and R40 to AD1981x blacklist
  [ALSA] Add missing sysfs device assignment for ALSA PCI drivers
  [ALSA] hda-codec - Define pin configs for MacBooks
  [ALSA] hda-codec - Add missing Mic Boost controls for ALC262
  [ALSA] soc - WM9712 PCM volume
  [ALSA] soc - Fix WM9712 register cache entry
  [ALSA] hda-codec - Add method for configuring Mac Pro without PCI SSID
  [ALSA] hda-codec - Add LFE support on Dell M90

Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] cifs_prepare_write was incorrectly rereading page in some cases
  [CIFS] Fix set file size to zero when doing chmod to Samba 3.0.26pre
  [CIFS] Remove some unused functions/declarations
  [CIFS] New file for previous commit
  [CIFS] cifs export operations
  [CIFS] small piece missing from previous patch
  [CIFS] Fix locking problem around some cifs uses of i_size write

Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  sdhci: release irq during suspend
  sdhci: make isr tolerant of read errors
  mmc: require explicit support for high-speed
  ncpfs: make sure server connection survives a kill

Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  sis900 warning fixes
  mv643xx_eth: Place explicit port number in mv643xx_eth_platform_data
  pcnet32: Fix PCnet32 performance bug on non-coherent architecutres
  __devinit & __devexit cleanups for de2104x driver
  3c59x: Handle pci_enable_device() failure while resuming
  dmfe: Fix link detection
  dmfe: fix two bugs
  dmfe: trivial/spelling fixes
  revert "drivers/net/tulip/dmfe: support basic carrier detection"
  ucc_geth: returns NETDEV_TX_BUSY when BD ring is full
  ucc_geth: Fix BD processing
  natsemi: netpoll fixes
  bonding: Improve IGMP join processing
  bonding: only receive ARPs for us
  bonding: fix double dev_add_pack

[MIPS] IP27: Build fix

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Wire up ioprio_set and ioprio_get.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Fix __raw_read_trylock() to allow multiple readers

A deadlock can occur for mixed irq and non-irq rwlock readers if a 2nd
reader attempts to take lock by looping around __raw_read_trylock().

Signed-off-by: Dave Johnson <djohnson+linux-mips@sw.starentnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Export __copy_user_inatomic.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] R2 bitops compile fix for gcc < 4.0.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] TX39: Remove redundant tx39_blast_icache() calls

Apply commit 0550d9d13e02b30efa117d47fcadea450bb23d23 to c-tx39.c too.
And fix a warning in local_tx39_flush_data_cache_page().

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Cobalt: Fix early printk

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] SMTC: De-obscure Malta hooks.

Should now be understandable why the thing works ...

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] SMTC: Add fordward declarations for mm_struct and task_struct.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] SMTC: <asm/mips_mt.h> must include <linux/cpumask.h>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] SMTC: <asm/smtc_ipi.h> must include <linux/spinlock.h>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Atlas, Malta: Fix build warning.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[IA64] kexec: Use EFI_LOADER_DATA for ELF core header

The address where the ELF core header is stored is passed to the secondary
kernel as a kernel command line option.  The memory area for this header is
also marked as a separate EFI memory descriptor on ia64.

The separate EFI memory descriptor is at the moment of the type
EFI_UNUSABLE_MEMORY.  With such a type the secondary kernel skips over the
entire memory granule (config option, 16M or 64M) when detecting memory.
If we are lucky we will just lose some memory, but if we happen to have
data in the same granule (such as an initramfs image), then this data will
never get mapped and the kernel bombs out when trying to access it.

So this is an attempt to fix this by changing the EFI memory descriptor
type into EFI_LOADER_DATA.  This type is the same type used for the kernel
data and for initramfs.  In the secondary kernel we then handle the ELF
core header data the same way as we handle the initramfs image.

This patch contains the kernel changes to make this happen.  Pretty
straightforward, we reserve the area in reserve_memory().  The address for
the area comes from the kernel command line and the size comes from the
specialized EFI parsing function vmcore_find_descriptor_size().

The kexec-tools-testing code for this can be found here:
http://lists.osdl.org/pipermail/fastboot/2007-February/005983.html

Signed-off-by: Magnus Damm <magnus@valinux.co.jp>
Cc: Simon Horman <horms@verge.net.au>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] permon use-after-free fix

Perfmon associates vmalloc()ed memory with a file descriptor, and installs
a vma mapping that memory.  Unfortunately, the vm_file field is not filled
in, so processes with mappings to that memory do not prevent the file from
being closed and the memory freed.  This results in use-after-free bugs and
multiple freeing of pages, etc.

I saw this bug on an Altix on SLES9.  Haven't reproduced upstream but it
looks like the same issue is there.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Stephane Eranian <eranian@hpl.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] sync compat getdents

Add VERIFY_WRITE check in the beginning like compat_sys_getdents() (EINVAL vs
EFAULT).

Signed-off-by: Alexandr Andreev <aandreev@openvz.org>
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] always build arch/ia64/lib/xor.o

Always build ia64 xor.o because multiple config options now depend on it.

Necessary to build .20-mm* on ia64 when, e.g., CONFIG_ASYNC_TX_DMA is
defined.  Don't know if '_ASYNC_TX_DMA makes sense on ia64.  If not, maybe
Kconfig should preclude it.

Could have defined a Kconfig option that defaults to true if MD_RAID456 ||
ASYNC_TX_DMA to control building of xor.o, but xor.o is only 848 bytes and
this IS ia64...

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Bob Picco <bob.picco@hp.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] Remove stack hard limit on ia64

Un-Breaks pthreads, since Oct 2003.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] point saved_max_pfn to the max_pfn of the entire system

Make saved_max_pfn point to max_pfn of entire system.

Without this patch is so that vmcore is zero length on ia64.  This is
because saved_max_pfn was wrongly being set to the max_pfn of the crash
kernel's address space, rather than the max_pfg on the physical memory of
the machine - the whole purpose of vmcore is to access physical memory that
is not part of the crash kernel's addresss space.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Sort-Of-Acked-By: Jay Lan <jlan@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Revert "[IA64] swiotlb abstraction (e.g. for Xen)"

This reverts commit 51099005ab8e09d68a13fea8d55bc739c1040ca6.

[PATCH] kconfig: Update swsusp description

Update the outdated and inaccurate description of the software suspend in
Kconfig.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: provide sunrpc pool_mode module option

Provide a module param "pool_mode" for sunrpc.ko which allows a sysadmin to
choose the mode for mapping NFS thread service pools to CPUs.  Values are:

auto     choose a mapping mode heuristically
global     (default, same as the pre-2.6.19 code) a single global pool
percpu     one pool per CPU
pernode     one pool per NUMA node

Note that since 2.6.19 the hardcoded behaviour has been "auto", this patch
makes the default "global".

The pool mode can be changed after boot/modprobe using /sys, if the NFS and
lockd services have been shut down.  A useful side effect of this change is to
fix a small memory leak when unloading the module.

Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: fix recently introduced problem with shutting down a busy NFS server

When the last thread of nfsd exits, it shuts down all related sockets.  It
currently uses svc_close_socket to do this, but that only is immediately
effective if the socket is not SK_BUSY.

If the socket is busy - i.e.  if a request has arrived that has not yet been
processes - svc_close_socket is not effective and the shutdown process spins.

So create a new svc_force_close_socket which removes the SK_BUSY flag is set
and then calls svc_close_socket.

Also change some open-codes loops in svc_destroy to use
list_for_each_entry_safe.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: remove CONFIG_IPV6 ifdefs from sunrpc server code

They don't really save that much, and aren't worth the hassle.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: use recv_msg to get peer address for NFSD instead of code-copying

The sunrpc server code needs to know the source and destination address for
UDP packets so it can reply properly.  It currently copies code out of the
network stack to pick the pieces out of the skb.  This is ugly and causes
compile problems with the IPv6 stuff.

So, rip that out and use recv_msg instead.  This is a much cleaner interface,
but has a slight cost in that the checksum is now checked before the copy, so
we don't benefit from doing both at the same time.  This can probably be
fixed.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] uml: comment the initialization of a global

Comment the fact that sig_info is initialized early in boot, and thus doesn't
need any locking.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] uml: add a debugging message

Add a debugging message in the case that mapping a stub fails.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] uml: fix formatting violations in signal delivery code

Fix a few formatting bugs in the signal code.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] linux/audit.h needs linux/types.h

Include linux/types.h here because we need a definition of __u32.  This file
appears not be exported verbatim by libc, so I think this doesn't have any
userspace consequences.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] initramfs should not depend on CONFIG_BLOCK

initramfs ended up depending on BLOCK:

  INITRAMFS_SOURCE <-- BLK_DEV_INITRD <-- BLOCK

This inhibits use of customized-initramfs-over-ramfs without block layer
(ramfs would still be enabled), useful in embedded applications.

Move BLK_DEV_INITRD out of 'drivers/block/Kconfig' and into 'init/Kconfig',
make it unconditional.

Signed-off-by: Dimitri Gorokhovik <dimitri.gorokhovik@free.fr>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] cciss: add struct pci_driver shutdown support (replaces reboot notifier)

This patch adds support for the struct pci_driver shutdown method to cciss.
 We require notification of an impending reboot or shutdown so that we can
flush the battery backed write cache (BBWC) on the Smart Array controller.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] cciss: fix for 2TB support

This patch changes the way we determine if a logical volume is larger than
2TB.

The original test looked for a total_size of 0.  Originally we added 1 to the
total_size.  That would make our read_capacity return size 0 for >2TB lv's.
We assumed that we could not have a lv size of 0 so it seemed OK until we were
in a clustered system.  The backup node would see a size of 0 due to the
reservation on the drive.  That caused the driver to switch to 16-byte CDB's
which are not supported on older controllers.  After that everything was
broken.

It may seem petty but I don't see the value in trying to determine if the LBA
is beyond the 2TB boundary.  That's why when we switch we use 16-byte CDB's
for all read/write operations.  Please consider this for inclusion.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Publish rcutorture module parameters via sysfs, read-only

rcutorture's module parameters currently use permissions of 0, so they
don't show up in /sys/module/rcutorture/parameters.  Change the permissions
on all module parameters to world-readable (0444).

rcutorture does all of its initialization and thread startup when loaded
and relies on the parameters not changing during execution, so they should
not permit writing.  However, reading seems fine.

Signed-off-by: Josh Triplett <josh@freedesktop.org>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] geode-aes: use unsigned long for spin_lock_irqsave

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] fs: nobh_truncate_page() fix

This fixes a regression caused by 22c8ca78f20724676b6006232bf06cc3e9299539.

nobh_prepare_write() no longer marks the page uptodate, so
nobh_truncate_page() needs to do it.

Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] fix vsyscall settimeofday

I've only seen this on x86_64.

The vsyscall state only gets updated when a timer interrupts comes in.  So
if the time is set long before the next timer, there will be a period when
a gettimeofday() won't reflect the correct time.

I added an explicit update_vsyscall() during the settimeofday(), that way
the vsyscall state doesn't get stale.

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] mqueue: nested locking annotation

Fix http://bugzilla.kernel.org/show_bug.cgi?id=8130

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] remove arch/i386/kernel/tsc.c:custom_sched_clock

Remove the no longer used custom_sched_clock.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] highres: do not run the TIMER_SOFTIRQ after switching to highres mode

The TIMER_SOFTIRQ runs the hrtimers during bootup until a usable
clocksource and clock event sources are registered.  The switch to high
resolution mode happens inside of the TIMER_SOFTIRQ, but runs the softirq
afterwards.  That way the tick emulation timer, which was set up in the
switch to highres might be executed in the softirq context, which is a BUG.
 The rbtree has not to be touched by the softirq after the highres switch.

This BUG was observed by Andres Salomon, who provided the information to
debug it.

Return early from the softirq, when the switch was sucessful.

[dilinger@debian.org: add debug warning]
[akpm@linux-foundation.org: make debug warning compile]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andres Salomon <dilinger@debian.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] hrtimers: hrtimer_clock_base description typo

The description for the hrtimer_clock_base struct describes "hrtimer_base".
 That should be hrtimer_clock_base.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] hrtimers: fix HRTIMER_CB_IRQSAFE_NO_SOFTIRQ description

The description for HRTIMER_CB_IRQSAFE_NO_SOFTIRQ is backwards; "NO
SOFTIRQ" sounds a whole lot like it means it must not be run in a softirq.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] i386: make x86_64 tsc header require i386 rather than vice-versa

Prior to commit 95492e4646e5de8b43d9a7908d6177fb737b61f0 ([PATCH] x86:
rewrite SMP TSC sync code), the headers in asm-i386 did not really require
anything in include/asm-x86_64.  This means that distributions such as
fedora did not include asm-x86_64 in kernel-devel headers for i386.  Ingo's
commit changed that, and broke things.  This is easy enough to hack around
in package builds by just including asm-x86_64 on i386, but that's kind of
annoying.  If anything, x86_64 should depend upon i386, not the other way
around.

This patch changes it so that asm-x86_64/tsc.h includes asm-i386/tsc.h,
rather than vice-versa.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Scheduled removal of SA_xxx interrupt flags fixups 3

The obsolete SA_xxx interrupt flags have been used despite the scheduled
removal.  Fixup the remaining users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Fix 2.6.21 rfcomm lockups

Any attempt to open/use a bluetooth rfcomm device locks up
scheduling completely on my machine.

Interrupts (ping, alt-sysrq) seem to be alive, but nothing else.

This was working fine in 2.6.20, broken now in 2.6.21-rc2-git*

Reverting this change (below) fixes it:

| author    Marcel Holtmann <marcel@holtmann.org>
|      Sat, 17 Feb 2007 22:58:57 +0000 (23:58 +0100)
| committer    David S. Miller <davem@sunset.davemloft.net>
|      Mon, 26 Feb 2007 19:42:41 +0000 (11:42 -0800)
| commit    c1a3313698895d8ad4760f98642007bf236af2e8
| tree    337a876f727061362b6a169f8759849c105b8f7a    tree | snapshot
| parent    f5ffd4620aba9e55656483ae1ef5c79ba81f5403    commit | diff
| | [Bluetooth] Make use of device_move() for RFCOMM TTY devices
| | In the case of bound RFCOMM TTY devices the parent is not available
| before its usage. So when opening a RFCOMM TTY device, move it to
| the corresponding ACL device as a child. When closing the device,
| move it back to the virtual device tree.
| Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The simplest fix for this bug is to prevent sysfs_move_dir()
from self-deadlocking when (old_parent == new_parent).

This patch prevents total system lockup when using rfcomm devices.

Signed-off-by: Mark Lord <mlord@pobox.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] fbdev: fix kconfig error if FB_DDC=n

Fix the following error if FB_DDC=n

Kernel: arch/x86_64/boot/bzImage is ready  (#1)
  Building modules, stage 2.
  MODPOST 229 modules
WARNING: "fb_ddc_read" [drivers/video/nvidia/nvidiafb.ko] undefined!
make[1]: *** [__modpost] Error 1

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] atyfb: fix kconfig error part 2

Fix implicit declarations and missing code in atyfb.

drivers/video/aty/atyfb_base.c:2137: warning: implicit declaration of function 'a
ty_ld_lcd'
drivers/video/aty/atyfb_base.c:2154: warning: implicit declaration of function 'a
ty_st_lcd'
atyfb_base.c:(.text+0x33e5c): undefined reference to `aty_ld_lcd'
atyfb_base.c:(.text+0x33eb2): undefined reference to `aty_st_lcd'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] nvidiafb backlight: Fix implicit declaration in nv_backlight

drivers/video/nvidia/nv_backlight.c: In function 'nvidia_bl_init':
drivers/video/nvidia/nv_backlight.c:103: error: implicit declaration of function 'pmac_has_backlight_type'

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] fix build with CONFIG_NO_IDLE_HZ=n

arch/i386/kernel/vmi.c: In function 'vmi_safe_halt':
arch/i386/kernel/vmi.c:262: warning: implicit declaration of function 'vmi_stop_hz_timer'
arch/i386/kernel/vmi.c:266: warning: implicit declaration of function 'vmi_account_time_restart_hz_timer'

Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Save/restore periodic tick information over suspend/resume

The programming of periodic tick devices needs to be saved/restored
across suspend/resume - otherwise we might end up with a system coming
up that relies on getting a PIT (or HPET) interrupt, while those devices
default to 'no interrupts' after powerup. (To confuse things it worked
to a certain degree on some systems because the lapic gets initialized
as a side-effect of SMP bootup.)

This suspend / resume thing was dropped unintentionally during the
last-minute -mm code reshuffling.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[ALSA] version 1.0.14rc3

Signed-off-by: Jaroslav Kysela <perex@suse.cz>

sdhci: release irq during suspend

Release the device's irq during sleep, as all well-behaved drivers
should.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

sdhci: make isr tolerant of read errors

The interrupt is shared with another device, which resumes earlier than the
sdhci controller, and generates an interrupt.

The sdhci interrupt handler runs, sees 0xffffffff in its own device's
interrupt status, and tries to handle it..  The reason for the 0xffffffff
is that the device is still suspended, and *all* regs are reading back
0xffffffff.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

mmc: require explicit support for high-speed

The new high-speed timings are similar to each other and the old
system, but not identical. And although things "just work" most of
the time, sometimes it does not. So we need to start marking which
hosts are known to fully comply with the new timings.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

ncpfs: make sure server connection survives a kill

Use internal buffers instead of the ones supplied by the caller
so that a caller can be interrupted without having to abort the
entire ncp connection.

Signed-off-by: Pierre Ossman <ossman@cendio.se>
Acked-by: Petr Vandrovec <petr@vandrovec.name>

sis900 warning fixes

drivers/net/sis900.c: In function 'sis900_reset_phy':
drivers/net/sis900.c:972: warning: 'status' may be used uninitialized in this function
drivers/net/sis900.c: In function 'sis900_check_mode':
drivers/net/sis900.c:1431: warning: 'status' may be used uninitialized in this function
drivers/net/sis900.c: In function 'sis900_timer':
drivers/net/sis900.c:1467: warning: 'status' may be used uninitialized in this function

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

mv643xx_eth: Place explicit port number in mv643xx_eth_platform_data

We were using the platform_device.id field to identify which ethernet
port is used for mv643xx_eth device.  This is not generally correct.
It will be incorrect, for example, if a hardware platform uses a single
port but not the first port.  Here, we add an explicit port_number field
to struct mv643xx_eth_platform_data.

This makes the mv643xx_eth_platform_data structure required, but that
isn't an issue since all users currently provide it already.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

pcnet32: Fix PCnet32 performance bug on non-coherent architecutres

The PCnet32 driver always passed the the size of the largest possible packet
to the pci_dma_sync_single_for_cpu and pci_dma_sync_single_for_device.
This results in a fairly large "colateral damage" in the caches and makes
the flush operation itself much slower.  On a system with a 40MHz CPU this
patch increases network bandwidth by about 12%.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Don Fry <pcnet32@verizon.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

__devinit & __devexit cleanups for de2104x driver

Fixes MODPOST warnings similar to:

WARNING: drivers/net/tulip/de2104x.o - Section mismatch: reference to
.init.text:de_init_one from .data.rel.local after 'de_driver' (at offset 0x20)
WARNING: drivers/net/tulip/de2104x.o - Section mismatch: reference to
.exit.text:de_remove_one from .data.rel.local after 'de_driver' (at offset 0x28)

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Valerie Henson <val_henson@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

3c59x: Handle pci_enable_device() failure while resuming

Handle pci_enable_device() failure while resuming, we can safely exit here.

Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

dmfe: Fix link detection

Add link detection

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

dmfe: fix two bugs

Fix a oops on module removal due to deallocating memory before unregistring
driver Fix a NULL pointer dereference when dev_alloc_skb fails

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

dmfe: trivial/spelling fixes

Fix a typo, wrap lines on 80-th column, change KERN_ERR to KERN_INFO for
link status message

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

revert "drivers/net/tulip/dmfe: support basic carrier detection"

Revert 7628b0a8c01a02966d2228bdf741ddedb128e8f8.  Thomas Bachler
reports:

  Commit 7628b0a8c01a02966d2228bdf741ddedb128e8f8 (drivers/net/tulip/dmfe:
  support basic carrier detection) breaks networking on my Davicom DM9009.
  ethtool always reports there is no link.  tcpdump shows incoming packets,
  but TX is disabled.  Reverting the above patch fixes the problem.

Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Thomas Bachler <thomas@archlinux.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ucc_geth: returns NETDEV_TX_BUSY when BD ring is full

Returns NETDEV_TX_BUSY when BD ring is full.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ucc_geth: Fix BD processing

Fix broken BD processing code.

Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

natsemi: netpoll fixes

Fix two issues in this driver's netpoll path: one usual, with spin_unlock_irq()
enabling interrupts which nobody asks it to do (that has been fixed recently in
a number of drivers) and one unusual, with poll_controller() method possibly
causing loss of interrupts due to the interrupt status register being cleared
by a simple read and the interrpupt handler simply storing it, not accumulating.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

bonding: Improve IGMP join processing

In active-backup mode, the current bonding code duplicates IGMP
traffic to all slaves, so that switches are up to date in case of a
failover from an active to a backup interface.  If bonding then fails
back to the original active interface, it is likely that the "active
slave" switch's IGMP forwarding for the port will be out of date until
some event occurs to refresh the switch (e.g., a membership query).

This patch alters the behavior of bonding to no longer flood
IGMP to all ports, and to issue IGMP JOINs to the newly active port at
the time of a failover.  This insures that switches are kept up to date
for all cases.

"GOELLESCH Niels" <niels.goellesch@eurocontrol.int> originally
reported this problem, and included a patch.  His original patch was
modified by Jay Vosburgh to additionally remove the existing IGMP flood
behavior, use RCU, streamline code paths, fix trailing white space, and
adjust for style.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

bonding: only receive ARPs for us

The ARP validation code only needs ARPs for the bonding device.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

bonding: fix double dev_add_pack

Bonding can erroneously register the same packet_type to receive
ARPs (for use by ARP validation): once at device open time, and once via
sysfs.  Since sysfs can change the validate setting (and thus register
or unregister) at any time, a flag is needed to synchronize with device
open in order to avoid double registrations, and the simplest place is
within the packet_type structure itself.  Double unregister is not an
issue.

Bug reported by Ulrich Oelmann <ulrich.oelmann@web.de>.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

[ALSA] cmipci - Allow to disable integrated FM port

The driver didn't allow to disable the integrated FM port (if available),
and this annoyed people who don't want FM port.  Now fm_port=0 disables
the FM port unconditionally.  fm_port=1 is used for enabling the integrated
FM port (as default).
Also fixed the documentation about this option.
Fix ALSA bug#2491.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Fix logic error in headphone mute for Conexant codecs

This patch fixes a logic error introduced in the previous patch.
Without it, speaker automute mutes the speakers when headphones are
removed and unmutes when headphones are plugged in.
This was reported by Gregorio Guidi after getting the earlier patch
off this mailing list.

Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Add missing Mic Boost for AD1986A codec

Added the missing 'Mic Boost' switch for AD1986A codec.
This influences largely on the recording level of mic-input on some boards.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ac97 - Add Thinkpad X31 and R40 to AD1981x blacklist

Added Thinkpad X31 and R40 to AD1981x line/HP-jack-sense blacklist
for avoiding the harmful mixer controls.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Add missing sysfs device assignment for ALSA PCI drivers

Added the missing sysfs device assignment for ALSA PCI drivers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Define pin configs for MacBooks

Define pin configs for MacBook and MacBook Pro with STAC92xx codecs.
The latter is detected automatically by checking codec SSID now.
Also, fixed the documentation regarding available modeliof sigmatel
codec chips.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Add missing Mic Boost controls for ALC262

Added missing Mic Boost controls for ALC262 codec chip.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] soc - WM9712 PCM volume

This patch suggested by Joe Sauer adds PCM playback volume kcontrol for
the WM9712.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] soc - Fix WM9712 register cache entry

This patch by Joe Sauer fixes the WM9712 codec register cache value for
register 0x08. Value should be 0x0f0f and not 0xf0f0.

Signed-off-by: Joe Sauer <jsauer@vernier.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Add method for configuring Mac Pro without PCI SSID

This patch adds a switch to configure systems that do not provide
PCI SSID's for HD Audio like Mac Pro with ALC885.

Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Add LFE support on Dell M90

Added LFE support on Dell M90 laptop.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[CIFS] cifs_prepare_write was incorrectly rereading page in some cases

Noticed by Shaggy.

Signed-off-by: Shaggy <shaggy@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

[PATCH] paravirt: re-enable COMPAT_VDSO

CONFIG_PARAVIRT broke old glibc bootup: it silently turned off the
selectability of CONFIG_COMPAT_VDSO and thus rendered distro kernels
unbootable on old-style VDSO glibc setups.

the proper solution is to keep COMPAT_VDSO available - if a hypervisor
needs any modification of that concept then we'll judge those changes in
full context, once those changes are submitted.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  backlight: Allow enable/disable of fb backlights, fixing regressions
  backlight: Fix nvidia backlight initial brightness

[PATCH] disable NMI watchdog by default

there's a new NMI watchdog related problem: KVM crashes on certain
bzImages because ... we enable the NMI watchdog by default (even if the
user does not ask for it) , and no other OS on this planet does that so
KVM doesnt have emulation for that yet. So KVM injects a #GP, which
crashes the Linux guest:

 general protection fault: 0000 [#1]
 PREEMPT SMP
 Modules linked in:
 CPU:    0
 EIP:    0060:[<c011a8ae>]    Not tainted VLI
 EFLAGS: 00000246   (2.6.20-rc5-rt0 #3)
 EIP is at setup_apic_nmi_watchdog+0x26d/0x3d3

and no, i did /not/ request an nmi_watchdog on the boot command line!

Solution: turn off that darn thing! It's a debug tool, not a 'make life
harder' tool!!

with this patch the KVM guest boots up just fine.

And with this my laptop (Lenovo T60) also stopped its sporadic hard
hanging (sometimes in acpi_init(), sometimes later during bootup,
sometimes much later during actual use) as well. It hung with both
nmi_watchdog=1 and nmi_watchdog=2, so it's generally the fact of NMI
injection that is causing problems, not the NMI watchdog variant, nor
any particular bootup code.

[ NMI breaks on some systems, esp in combination with SMM -Arjan ]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] paravirt: let users decide whether they want VMI

do not use default=y for CONFIG_VMI (we do not do that for any driver or
special-hardware feature): the overwhelming majority of Linux users does
not need it, and interested users and distributions can enable it
as-needed.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] paravirt: clarify VMI description

Clarify the description of the CONFIG_VMI option: describe the reality
that VMI is a VMWare-only interface for now. Once that changes and
another hypervisor adopts the VMI ABI we can change the text.

As can be seen from the Xen paravirtualization patches submitted to lkml
the Xen project has chosen its own, non-VMI interface between Xen and
the para-Linux - so remove Xen from the description.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] paravirt: remove NO_IDLE_HZ on x86

Temove the mistaken turning on of NO_IDLE_HZ on x86+PARAVIRT kernels.

It's an obsolete, limited form of dynticks.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] video/aty/mach64_ct.c: fix bogus delay loop

CT based mach64 cards were reported to hang on sparc64 boxes when
compiled with gcc-4.1.x and later.

Looking at this piece of code, it's no surprise.  A critical
delay was implemented as an empty for() loop, and gcc 4.0.x
and previous did not optimize it away, so we did get a delay.

But gcc-4.1.x and later can optimize it away, and we get crashes.

Use a real udelay() to fix this.  Fix verified on SunBlade100.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] arch/i386/kernel/vmi.c must #include <asm/kmap_types.h>

  CC      arch/i386/kernel/vmi.o
/home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/arch/i386/kernel/vmi.c: In function 'vmi_map_pt_hook':
/home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/arch/i386/kernel/vmi.c:387: error: 'KM_PTE0' undeclared (first use in this function)
/home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/arch/i386/kernel/vmi.c:387: error: (Each undeclared identifier is reported only once
/home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/arch/i386/kernel/vmi.c:387: error: for each function it appears in.)
/home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/arch/i386/kernel/vmi.c:387: error: 'KM_PTE1' undeclared (first use in this function)
make[2]: *** [arch/i386/kernel/vmi.o] Error 1

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] usb-storage: do not rebuild when kernel version changes

Replacing use of UTS_RELEASE with utsname()->release avoids that the
usb-storage driver is recompiled each time the kernel version changes.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>