9 years agoMerge branch 'linux-next' of git://
Linus Torvalds [Thu, 15 Dec 2011 22:16:47 +0000 (14:16 -0800)]
Merge branch 'linux-next' of git://git./linux/kernel/git/konrad/ibft

* 'linux-next' of git://
  ibft: Fix finding IBFT ACPI table on UEFI

9 years agoMerge branch 'staging-linus' of git://
Linus Torvalds [Thu, 15 Dec 2011 22:15:01 +0000 (14:15 -0800)]
Merge branch 'staging-linus' of git://git./linux/kernel/git/gregkh/staging

* 'staging-linus' of git://
  staging: r8712u: Add new USB ID
  staging: tidspbridge: request dmtimer clocks on init
  staging: tidspbridge: include module.h by default

9 years agoMerge branch 'usb-linus' of git://
Linus Torvalds [Thu, 15 Dec 2011 22:14:41 +0000 (14:14 -0800)]
Merge branch 'usb-linus' of git://git./linux/kernel/git/gregkh/usb

* 'usb-linus' of git://
  USB: option: Removing one bogus and adding some new Huawei combinations
  USB: cdc-acm: add IDs for Motorola H24 HSPA USB module.
  usb: option: Add Huawei E398 controlling interfaces
  usb: renesas_usbhs: add hcd->has_tt for low/full speed
  usb: renesas_usbhs: typofix: irq_dtch control DTCHE
  usb: gadget: storage: release superspeed descriptors.

9 years agoARM: unwinder: fix bisection to find origin in .idx section
Uwe Kleine-König [Thu, 15 Dec 2011 20:47:56 +0000 (21:47 +0100)]
ARM: unwinder: fix bisection to find origin in .idx section

The bisection implemented in unwind_find_origin() stopped to early.  If
there is only a single entry left to check the original code just took
the end point as origin which might be wrong.

This was introduced in commit de66a979012d ("ARM: 7187/1: fix unwinding
for XIP kernels").

Reported-and-tested-by: Nick Bowler <>
Signed-off-by: Uwe Kleine-König <>
Signed-off-by: Linus Torvalds <>
9 years agoMerge branch 'stable/for-linus-fixes-3.2' of git://
Linus Torvalds [Thu, 15 Dec 2011 18:52:40 +0000 (10:52 -0800)]
Merge branch 'stable/for-linus-fixes-3.2' of git://git./linux/kernel/git/konrad/xen

* 'stable/for-linus-fixes-3.2' of git://
  xen/swiotlb: Use page alignment for early buffer allocation.
  xen: only limit memory map to maximum reservation for domain 0.

9 years agoxen/swiotlb: Use page alignment for early buffer allocation.
Konrad Rzeszutek Wilk [Thu, 15 Dec 2011 16:28:46 +0000 (11:28 -0500)]
xen/swiotlb: Use page alignment for early buffer allocation.

This fixes an odd bug found on a Dell PowerEdge 1850/0RC130
(BIOS A05 01/09/2006) where all of the modules doing pci_set_dma_mask
would fail with:

ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
ata_piix 0000:00:1f.1: BMDMA: failed to set dma mask, falling back to PIO

The issue was the Xen-SWIOTLB was allocated such as that the end of
buffer was stradling a page (and also above 4GB). The fix was
spotted by Kalev Leonid  which was to piggyback on git commit
e79f86b2ef9c0a8c47225217c1018b7d3d90101c "swiotlb: Use page alignment
for early buffer allocation" which:

We could call free_bootmem_late() if swiotlb is not used, and
it will shrink to page alignment.

So alloc them with page alignment at first, to avoid lose two pages

And doing that fixes the outstanding issue.

Suggested-by: "Kalev, Leonid" <>
Reported-and-Tested-by: "Taylor, Neal E" <>
Signed-off-by: Konrad Rzeszutek Wilk <>
9 years agoxen: only limit memory map to maximum reservation for domain 0.
Ian Campbell [Wed, 14 Dec 2011 12:16:08 +0000 (12:16 +0000)]
xen: only limit memory map to maximum reservation for domain 0.

d312ae878b6a "xen: use maximum reservation to limit amount of usable RAM"
clamped the total amount of RAM to the current maximum reservation. This is
correct for dom0 but is not correct for guest domains. In order to boot a guest
"pre-ballooned" (e.g. with memory=1G but maxmem=2G) in order to allow for
future memory expansion the guest must derive max_pfn from the e820 provided by
the toolstack and not the current maximum reservation (which can reflect only
the current maximum, not the guest lifetime max). The existing algorithm
already behaves this correctly if we do not artificially limit the maximum
number of pages for the guest case.

For a guest booted with maxmem=512, memory=128 this results in:
 [    0.000000] BIOS-provided physical RAM map:
 [    0.000000]  Xen: 0000000000000000 - 00000000000a0000 (usable)
 [    0.000000]  Xen: 00000000000a0000 - 0000000000100000 (reserved)
-[    0.000000]  Xen: 0000000000100000 - 0000000008100000 (usable)
-[    0.000000]  Xen: 0000000008100000 - 0000000020800000 (unusable)
+[    0.000000]  Xen: 0000000000100000 - 0000000020800000 (usable)
 [    0.000000] NX (Execute Disable) protection: active
 [    0.000000] DMI not present or invalid.
 [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
 [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
-[    0.000000] last_pfn = 0x8100 max_arch_pfn = 0x1000000
+[    0.000000] last_pfn = 0x20800 max_arch_pfn = 0x1000000
 [    0.000000] initial memory mapped : 0 - 027ff000
 [    0.000000] Base memory trampoline at [c009f000] 9f000 size 4096
-[    0.000000] init_memory_mapping: 0000000000000000-0000000008100000
-[    0.000000]  0000000000 - 0008100000 page 4k
-[    0.000000] kernel direct mapping tables up to 8100000 @ 27bb000-27ff000
+[    0.000000] init_memory_mapping: 0000000000000000-0000000020800000
+[    0.000000]  0000000000 - 0020800000 page 4k
+[    0.000000] kernel direct mapping tables up to 20800000 @ 26f8000-27ff000
 [    0.000000] xen: setting RW the range 27e8000 - 27ff000
 [    0.000000] 0MB HIGHMEM available.
-[    0.000000] 129MB LOWMEM available.
-[    0.000000]   mapped low ram: 0 - 08100000
-[    0.000000]   low ram: 0 - 08100000
+[    0.000000] 520MB LOWMEM available.
+[    0.000000]   mapped low ram: 0 - 20800000
+[    0.000000]   low ram: 0 - 20800000

With this change "xl mem-set <domain> 512M" will successfully increase the
guest RAM (by reducing the balloon).

There is no change for dom0.

Reported-and-Tested-by: George Shuklin <>
Signed-off-by: Ian Campbell <>
Reviewed-by: David Vrabel <>
Signed-off-by: Konrad Rzeszutek Wilk <>
9 years agoMerge branch 'drm-fixes' of git://
Linus Torvalds [Thu, 15 Dec 2011 03:45:40 +0000 (19:45 -0800)]
Merge branch 'drm-fixes' of git://

* 'drm-fixes' of git://
  drm/radeon/kms: add some new pci ids

9 years agoMerge tag 'tytso-for-linus-20111214' of git://
Linus Torvalds [Thu, 15 Dec 2011 02:25:58 +0000 (18:25 -0800)]
Merge tag 'tytso-for-linus-20111214' of git://git./linux/kernel/git/tytso/ext4

* tag 'tytso-for-linus-20111214' of git://
  ext4: handle EOF correctly in ext4_bio_write_page()
  ext4: remove a wrong BUG_ON in ext4_ext_convert_to_initialized
  ext4: correctly handle pages w/o buffers in ext4_discard_partial_buffers()
  ext4: avoid potential hang in mpage_submit_io() when blocksize < pagesize
  ext4: avoid hangs in ext4_da_should_update_i_disksize()
  ext4: display the correct mount option in /proc/mounts for [no]init_itable
  ext4: Fix crash due to getting bogus eh_depth value on big-endian systems
  ext4: fix ext4_end_io_dio() racing against fsync()

.. using the new signed tag merge of git that now verifies the gpg
signature automatically.  Yay.  The branchname was just 'dev', which is
prettier.  I'll tell Ted to use nicer tag names for future cases.

9 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Thu, 15 Dec 2011 02:23:35 +0000 (18:23 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse

* 'for-linus' of git://
  fuse: llseek fix race
  fuse: fix llseek bug
  fuse: fix fuse_retrieve

9 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Thu, 15 Dec 2011 02:22:55 +0000 (18:22 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

* 'for-linus' of git://
  fs/ncpfs: fix error paths and goto statements in ncp_fill_super()
  configfs: register_filesystem() called too early
  fuse: register_filesystem() called too early
  ubifs: too early register_filesystem()
  ... and the same kind of leak for mqueue
  procfs: fix a vfsmount longterm reference leak

9 years agodrm/radeon/kms: add some new pci ids
Alex Deucher [Mon, 12 Dec 2011 14:23:48 +0000 (09:23 -0500)]
drm/radeon/kms: add some new pci ids


Signed-off-by: Alex Deucher <>
Signed-off-by: Dave Airlie <>
9 years agofs/ncpfs: fix error paths and goto statements in ncp_fill_super()
Djalal Harouni [Tue, 13 Dec 2011 01:47:29 +0000 (02:47 +0100)]
fs/ncpfs: fix error paths and goto statements in ncp_fill_super()

The label 'out_bdi' should be followed by bdi_destroy() instead of
fput() which should be after the 'out_fput' label.

If bdi_setup_and_register() fails then jump to the 'out_fput' label
instead of the 'out_bdi' one.

If fget(data.info_fd) fails then jump to the previously fixed 'out_bdi'
label to call bdi_destroy() otherwise the bdi object will not be

Compile tested only.

Signed-off-by: Djalal Harouni <>
Signed-off-by: Al Viro <>
9 years agoext4: handle EOF correctly in ext4_bio_write_page()
Yongqiang Yang [Wed, 14 Dec 2011 03:29:12 +0000 (22:29 -0500)]
ext4: handle EOF correctly in ext4_bio_write_page()

We need to zero out part of a page which beyond EOF before setting uptodate,
otherwise, mapread or write will see non-zero data beyond EOF.

Signed-off-by: Yongqiang Yang <>
Signed-off-by: "Theodore Ts'o" <>
9 years agoext4: remove a wrong BUG_ON in ext4_ext_convert_to_initialized
Yongqiang Yang [Wed, 14 Dec 2011 03:13:42 +0000 (22:13 -0500)]
ext4: remove a wrong BUG_ON in ext4_ext_convert_to_initialized

If a file is fallocated on a hole, map->m_lblk + map->m_len may be greater
than ee_block + ee_len.

Signed-off-by: Yongqiang Yang <>
Signed-off-by: "Theodore Ts'o" <>
9 years agoext4: correctly handle pages w/o buffers in ext4_discard_partial_buffers()
Yongqiang Yang [Wed, 14 Dec 2011 03:05:05 +0000 (22:05 -0500)]
ext4: correctly handle pages w/o buffers in ext4_discard_partial_buffers()

If a page has been read into memory and never been written, it has no
buffers, but we should handle the page in truncate or punch hole.

VFS code of writing operations has handled holes correctly, so this
patch removes the code handling holes in writing operations.

Signed-off-by: Yongqiang Yang <>
Signed-off-by: "Theodore Ts'o" <>
9 years agoext4: avoid potential hang in mpage_submit_io() when blocksize < pagesize
Yongqiang Yang [Wed, 14 Dec 2011 02:51:55 +0000 (21:51 -0500)]
ext4: avoid potential hang in mpage_submit_io() when blocksize < pagesize

If there is an unwritten but clean buffer in a page and there is a
dirty buffer after the buffer, then mpage_submit_io does not write the
dirty buffer out.  As a result, da_writepages loops forever.

This patch fixes the problem by checking dirty flag.

Signed-off-by: Yongqiang Yang <>
Signed-off-by: "Theodore Ts'o" <>
9 years agoext4: avoid hangs in ext4_da_should_update_i_disksize()
Andrea Arcangeli [Wed, 14 Dec 2011 02:41:15 +0000 (21:41 -0500)]
ext4: avoid hangs in ext4_da_should_update_i_disksize()

If the pte mapping in generic_perform_write() is unmapped between
iov_iter_fault_in_readable() and iov_iter_copy_from_user_atomic(), the
"copied" parameter to ->end_write can be zero. ext4 couldn't cope with
it with delayed allocations enabled. This skips the i_disksize
enlargement logic if copied is zero and no new data was appeneded to
the inode.

 gdb> bt
 #0  0xffffffff811afe80 in ext4_da_should_update_i_disksize (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x1\
 08000, len=0x1000, copied=0x0, page=0xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2467
 #1  ext4_da_write_end (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x108000, len=0x1000, copied=0x0, page=0\
 xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2512
 #2  0xffffffff810d97f1 in generic_perform_write (iocb=<value optimized out>, iov=<value optimized out>, nr_segs=<value o\
 ptimized out>, pos=0x108000, ppos=0xffff88001e26be40, count=<value optimized out>, written=0x0) at mm/filemap.c:2440
 #3  generic_file_buffered_write (iocb=<value optimized out>, iov=<value optimized out>, nr_segs=<value optimized out>, p\
 os=0x108000, ppos=0xffff88001e26be40, count=<value optimized out>, written=0x0) at mm/filemap.c:2482
 #4  0xffffffff810db5d1 in __generic_file_aio_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=0x1, ppos=0\
 xffff88001e26be40) at mm/filemap.c:2600
 #5  0xffffffff810db853 in generic_file_aio_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=<value optimi\
 zed out>, pos=<value optimized out>) at mm/filemap.c:2632
 #6  0xffffffff811a71aa in ext4_file_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=0x1, pos=0x108000) a\
 t fs/ext4/file.c:136
 #7  0xffffffff811375aa in do_sync_write (filp=0xffff88003f606a80, buf=<value optimized out>, len=<value optimized out>, \
 ppos=0xffff88001e26bf48) at fs/read_write.c:406
 #8  0xffffffff81137e56 in vfs_write (file=0xffff88003f606a80, buf=0x1ec2960 <Address 0x1ec2960 out of bounds>, count=0x4\
 000, pos=0xffff88001e26bf48) at fs/read_write.c:435
 #9  0xffffffff8113816c in sys_write (fd=<value optimized out>, buf=0x1ec2960 <Address 0x1ec2960 out of bounds>, count=0x\
 4000) at fs/read_write.c:487
 #10 <signal handler called>
 #11 0x00007f120077a390 in __brk_reservation_fn_dmi_alloc__ ()
 #12 0x0000000000000000 in ?? ()
 gdb> print offset
 $22 = 0xffffffffffffffff
 gdb> print idx
 $23 = 0xffffffff
 gdb> print inode->i_blkbits
 $24 = 0xc
 gdb> up
 #1  ext4_da_write_end (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x108000, len=0x1000, copied=0x0, page=0\
 xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2512
 2512                    if (ext4_da_should_update_i_disksize(page, end)) {
 gdb> print start
 $25 = 0x0
 gdb> print end
 $26 = 0xffffffffffffffff
 gdb> print pos
 $27 = 0x108000
 gdb> print new_i_size
 $28 = 0x108000
 gdb> print ((struct ext4_inode_info *)((char *)inode-((int)(&((struct ext4_inode_info *)0)->vfs_inode))))->i_disksize
 $29 = 0xd9000
 gdb> down
 2467            for (i = 0; i < idx; i++)
 gdb> print i
 $30 = 0xd44acbee

This is 100% reproducible with some autonuma development code tuned in
a very aggressive manner (not normal way even for knumad) which does
"exotic" changes to the ptes. It wouldn't normally trigger but I don't
see why it can't happen normally if the page is added to swap cache in
between the two faults leading to "copied" being zero (which then
hangs in ext4). So it should be fixed. Especially possible with lumpy
reclaim (albeit disabled if compaction is enabled) as that would
ignore the young bits in the ptes.

Signed-off-by: Andrea Arcangeli <>
Signed-off-by: "Theodore Ts'o" <>
9 years agostaging: r8712u: Add new USB ID
Larry Finger [Sun, 11 Dec 2011 16:27:54 +0000 (10:27 -0600)]
staging: r8712u: Add new USB ID

Add USB ID for Sitecom WLA-2000 v1.001 WLAN.

Reported-and-tested-by: Roland Gruber <>
Signed-off-by: Larry Finger <>
Cc: Stable <>
Signed-off-by: Greg Kroah-Hartman <>
9 years agostaging: tidspbridge: request dmtimer clocks on init
Omar Ramirez Luna [Fri, 18 Nov 2011 22:18:54 +0000 (16:18 -0600)]
staging: tidspbridge: request dmtimer clocks on init

Given that dm timer framework doesn't support request of clocks
by soft | hard irqs because some recent changes, tidspbridge needs
to request its clocks on init and enable/disable them on demand.

This was first seen on 3.2-rc1.

Signed-off-by: Omar Ramirez Luna <>
Signed-off-by: Greg Kroah-Hartman <>
9 years agostaging: tidspbridge: include module.h by default
Omar Ramirez Luna [Tue, 15 Nov 2011 02:16:57 +0000 (20:16 -0600)]
staging: tidspbridge: include module.h by default

Fixes compilation break when compiled as part of the kernel:

drivers/staging/tidspbridge/rmgr/drv_interface.c:134: error: expected declaration specifiers or '...' before string constant
drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: data definition has no type or storage class
drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: function declaration isn't a prototype
drivers/staging/tidspbridge/rmgr/drv_interface.c:135: error: expected declaration specifiers or '...' before string constant
drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: data definition has no type or storage class
drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE'
drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: function declaration isn't a prototype
drivers/staging/tidspbridge/rmgr/drv_interface.c:136: error: expected declaration specifiers or '...' before string constant
drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: data definition has no type or storage class
drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: type defaults to 'int' in declaration of 'MODULE_VERSION'
drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: function declaration isn't a prototype
drivers/staging/tidspbridge/rmgr/drv_interface.c: In function 'omap34_xx_bridge_probe':
drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: 'THIS_MODULE' undeclared (first use in this function)
drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: (Each undeclared identifier is reported only once
drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: for each function it appears in.)

Signed-off-by: Omar Ramirez Luna <>
Signed-off-by: Greg Kroah-Hartman <>
9 years agoMerge branch 'x86-urgent-for-linus' of git://
Linus Torvalds [Tue, 13 Dec 2011 23:02:31 +0000 (15:02 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'x86-urgent-for-linus' of git://
  Revert "x86, efi: Calling __pa() with an ioremap()ed address is invalid"
  x86, efi: Make efi_call_phys_{prelog,epilog} CONFIG_RELOCATABLE-aware

9 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Tue, 13 Dec 2011 22:59:42 +0000 (14:59 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

* 'for-linus' of git://
  ceph: add missing spin_unlock at ceph_mdsc_build_path()
  ceph: fix SEEK_CUR, SEEK_SET regression
  crush: fix mapping calculation when force argument doesn't exist
  ceph: use i_ceph_lock instead of i_lock
  rbd: remove buggy rollback functionality
  rbd: return an error when an invalid header is read
  ceph: fix rasize reporting by ceph_show_options

9 years agoMerge branch 'writeback-for-linus' of git://
Linus Torvalds [Tue, 13 Dec 2011 22:58:56 +0000 (14:58 -0800)]
Merge branch 'writeback-for-linus' of git://git./linux/kernel/git/wfg/linux

* 'writeback-for-linus' of git://
  writeback: set max_pause to lowest value on zero bdi_dirty
  writeback: permit through good bdi even when global dirty exceeded
  writeback: comment on the bdi dirty threshold
  fs: Make write(2) interruptible by a fatal signal
  writeback: Fix issue on make htmldocs

9 years agoceph: add missing spin_unlock at ceph_mdsc_build_path()
Yehuda Sadeh [Tue, 13 Dec 2011 17:57:44 +0000 (09:57 -0800)]
ceph: add missing spin_unlock at ceph_mdsc_build_path()

one of the paths was missing spin_unlock

Signed-off-by: Yehuda Sadeh <>
9 years agoUSB: option: Removing one bogus and adding some new Huawei combinations
Bjørn Mork [Tue, 13 Dec 2011 04:33:02 +0000 (05:33 +0100)]
USB: option: Removing one bogus and adding some new Huawei combinations

Huawei use the product code HUAWEI_PRODUCT_E353 (0x1506) for a
number of different devices, which each can appear with a number
of different descriptor sets.  Different types of interfaces
can be identified by looking at the subclass and protocol fields

Subclass 1 protocol 8 is actually the data interface of a CDC
ECM set, with subclass 1 protocol 9 as the control interface.
Neither support serial data communcation, and cannot therefore
be supported by this driver.

At the same time, add a few other sets which appear if the
device is configured in "Windows mode" using this modeswitch

Signed-off-by: Bjørn Mork <>
Cc: stable <>
Signed-off-by: Greg Kroah-Hartman <>
9 years agoconfigfs: register_filesystem() called too early
Al Viro [Tue, 13 Dec 2011 17:32:42 +0000 (12:32 -0500)]
configfs: register_filesystem() called too early

Signed-off-by: Al Viro <>
9 years agofuse: register_filesystem() called too early
Al Viro [Tue, 13 Dec 2011 17:25:27 +0000 (12:25 -0500)]
fuse: register_filesystem() called too early

same story as with ubifs

Signed-off-by: Al Viro <>
9 years agoubifs: too early register_filesystem()
Al Viro [Tue, 13 Dec 2011 04:58:21 +0000 (23:58 -0500)]
ubifs: too early register_filesystem()

doing that before you are ready to handle mount() is a Bad Idea(tm)...

Signed-off-by: Al Viro <>
9 years agoMerge branch 'fixes' of
Linus Torvalds [Tue, 13 Dec 2011 17:28:23 +0000 (09:28 -0800)]
Merge branch 'fixes' of

* 'fixes' of
  ARM: 7204/1: arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlier
  ARM: 7185/1: perf: don't assign platform_device on unsupported CPUs
  ARM: 7187/1: fix unwinding for XIP kernels
  ARM: 7186/1: fix Kconfig issue with PHYS_OFFSET and !MMU

9 years agoceph: fix SEEK_CUR, SEEK_SET regression
Sage Weil [Tue, 13 Dec 2011 17:19:26 +0000 (09:19 -0800)]
ceph: fix SEEK_CUR, SEEK_SET regression

Commit 06222e491e663dac939f04b125c9dc52126a75c4 got the if wrong so that
it always evaluates as true.  This is semantically harmless, but makes
SEEK_CUR and SEEK_SET needlessly query the server.

Rewrite the if to explicitly enumerate the cases we DO need a valid i_size
to make this code less fragile.

Reported-by: Roel Kluin <>
Signed-off-by: Sage Weil <>
9 years agoibft: Fix finding IBFT ACPI table on UEFI
Yinghai Lu [Mon, 12 Dec 2011 20:39:14 +0000 (12:39 -0800)]
ibft: Fix finding IBFT ACPI table on UEFI

Found one system with UEFI/iBFT, kernel does not detect the iBFT during
iscsi_ibft module loading.

Root cause: on x86 (UEFI), we are calling of find_ibft_region() much earlier
- specifically in setup_arch() before ACPI is enabled.

Try to split acpi checking code out and call that later

At that time ACPI iBFT already get permanent mapped with ioremap.
So isa_virt_to_bus() will get wrong phys from right virt address.
We could just skip that phys address printing.

For legacy one, print the found address early.

-v2: update comments and description according to Konrad.
-v3: fix problem about module use case that is found by Konrad.
-v4: use acpi_get_table() instead of acpi_table_parse() to handle module use case that is found by Konrad again..
Signed-off-by: Yinghai Lu <>
Signed-off-by: Konrad Rzeszutek Wilk <>
9 years agofuse: llseek fix race
Miklos Szeredi [Tue, 13 Dec 2011 10:40:59 +0000 (11:40 +0100)]
fuse: llseek fix race

Fix race between lseek(fd, 0, SEEK_CUR) and read/write.  This was fixed in
generic code by commit 5b6f1eb97d (vfs: lseek(fd, 0, SEEK_CUR) race condition).

Signed-off-by: Miklos Szeredi <>
9 years agofuse: fix llseek bug
Roel Kluin [Tue, 13 Dec 2011 09:37:00 +0000 (10:37 +0100)]
fuse: fix llseek bug

The test in fuse_file_llseek() "not SEEK_CUR or not SEEK_SET" always evaluates
to true.

This was introduced in 3.1 by commit 06222e49 (fs: handle SEEK_HOLE/SEEK_DATA
properly in all fs's that define their own llseek) and changed the behavior of
SEEK_CUR and SEEK_SET to always retrieve the file attributes.  This is a
performance regression.

Fix the test so that it makes sense.

Signed-off-by: Miklos Szeredi <>
CC: Josef Bacik <>
CC: Al Viro <>
9 years agofuse: fix fuse_retrieve
Miklos Szeredi [Tue, 13 Dec 2011 09:36:59 +0000 (10:36 +0100)]
fuse: fix fuse_retrieve

Fix two bugs in fuse_retrieve():

 - retrieving more than one page would yield repeated instances of the
   first page

 - if more than FUSE_MAX_PAGES_PER_REQ pages were requested than the
   request page array would overflow

fuse_retrieve() was added in 2.6.36 and these bugs had been there since the

Signed-off-by: Miklos Szeredi <>
9 years agolinux/log2.h: Fix rounddown_pow_of_two(1)
Linus Torvalds [Tue, 13 Dec 2011 06:06:55 +0000 (22:06 -0800)]
linux/log2.h: Fix rounddown_pow_of_two(1)

Exactly like roundup_pow_of_two(1), the rounddown version was buggy for
the case of a compile-time constant '1' argument.  Probably because it
originated from the same code, sharing history with the roundup version
from before the bugfix (for that one, see commit 1a06a52ee1b0: "Fix

However, unlike the roundup version, the fix for rounddown is to just
remove the broken special case entirely.  It's simply not needed - the
generic code

    1UL << ilog2(n)

does the right thing for the constant '1' argment too.  The only reason
roundup needed that special case was because rounding up does so by
subtracting one from the argument (and then adding one to the result)
causing the obvious problems with "ilog2(0)".

But rounddown doesn't do any of that, since ilog2() naturally truncates
(ie "rounds down") to the right rounded down value.  And without the
ilog2(0) case, there's no reason for the special case that had the wrong

tl;dr: rounddown_pow_of_two(1) should be 1, not 0.

Acked-by: Dmitry Torokhov <>
Signed-off-by: Linus Torvalds <>
9 years agoMerge branch 'hwmon-for-linus' of git://
Linus Torvalds [Tue, 13 Dec 2011 04:08:27 +0000 (20:08 -0800)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

* 'hwmon-for-linus' of git://
  hwmon: (jz4740) Staticise jz4740_hwmon_driver
  hwmon: (jz4740) fix signedness bug

9 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Tue, 13 Dec 2011 04:06:13 +0000 (20:06 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/cjb/mmc

* 'for-linus' of git://
  mmc: core: Fix deadlock when the CONFIG_MMC_UNSAFE_RESUME is not defined
  mmc: sdhci-s3c: Remove old and misprototyped suspend operations
  mmc: tmio: fix clock gating on platforms with a .set_pwr() method
  mmc: sh_mmcif: fix clock gating on platforms with a .down_pwr() method
  mmc: core: Fix typo at mmc_card_sleep
  mmc: core: Fix power_off_notify during suspend
  mmc: core: Fix setting power notify state variable for non-eMMC
  mmc: core: Add quirk for long data read time
  mmc: Add module.h include to sdhci-cns3xxx.c
  mmc: mxcmmc: fix falling back to PIO
  mmc: omap_hsmmc: DMA unmap only once in case of MMC error

9 years agoext4: display the correct mount option in /proc/mounts for [no]init_itable
Theodore Ts'o [Tue, 13 Dec 2011 03:06:18 +0000 (22:06 -0500)]
ext4: display the correct mount option in /proc/mounts for [no]init_itable

/proc/mounts was showing the mount option [no]init_inode_table when
the correct mount option that will be accepted by parse_options() is

Signed-off-by: "Theodore Ts'o" <>
9 years agoUSB: cdc-acm: add IDs for Motorola H24 HSPA USB module.
Krzysztof Hałasa [Mon, 12 Dec 2011 13:51:00 +0000 (14:51 +0100)]
USB: cdc-acm: add IDs for Motorola H24 HSPA USB module.

Add USB IDs for Motorola H24 HSPA USB module.

Signed-off-by: Krzysztof Hałasa <>
Acked-by: Oliver Neukum <>
Cc: stable <>
Signed-off-by: Greg Kroah-Hartman <>
9 years agousb: option: Add Huawei E398 controlling interfaces
Alex Hermann [Mon, 12 Dec 2011 20:42:23 +0000 (21:42 +0100)]
usb: option: Add Huawei E398 controlling interfaces

This patch adds the controlling interfaces for the Huawei E398.

Thanks to Bjørn Mork <> for extracting the interface
numbers from the windows driver.

Signed-off-by: Alex Hermann <>
Cc: stable <>
Signed-off-by: Greg Kroah-Hartman <>
9 years agoRevert "x86, efi: Calling __pa() with an ioremap()ed address is invalid"
Keith Packard [Mon, 12 Dec 2011 00:12:42 +0000 (16:12 -0800)]
Revert "x86, efi: Calling __pa() with an ioremap()ed address is invalid"

This hangs my MacBook Air at boot time; I get no console
messages at all. I reverted this on top of -rc5 and my machine
boots again.

This reverts commit e8c7106280a305e1ff2a3a8a4dfce141469fb039.

Signed-off-by: Matt Fleming <>
Signed-off-by: Keith Packard <>
Acked-by: H. Peter Anvin <>
Cc: Matthew Garrett <>
Cc: Zhang Rui <>
Cc: Huang Ying <>
Cc: Linus Torvalds <>
Cc: Andrew Morton <>
Signed-off-by: Ingo Molnar <>
9 years agocrush: fix mapping calculation when force argument doesn't exist
Sage Weil [Wed, 7 Dec 2011 17:10:26 +0000 (09:10 -0800)]
crush: fix mapping calculation when force argument doesn't exist

If the force argument isn't valid, we should continue calculating a
mapping as if it weren't specified.

Signed-off-by: Sage Weil <>
9 years agohwmon: (jz4740) Staticise jz4740_hwmon_driver
Axel Lin [Thu, 8 Dec 2011 13:33:37 +0000 (08:33 -0500)]
hwmon: (jz4740) Staticise jz4740_hwmon_driver

It is not used outside this driver so no need to make the symbol global.

Signed-off-by: Axel Lin <>
Acked-by: Lars-Peter Clausen <>
Signed-off-by: Guenter Roeck <>
9 years agohwmon: (jz4740) fix signedness bug
Axel Lin [Thu, 8 Dec 2011 13:04:12 +0000 (08:04 -0500)]
hwmon: (jz4740) fix signedness bug

wait_for_completion_interruptible_timeout() may return negative value.
In this case, checking if (t > 0)  will return true if t is unsigned.

Signed-off-by: Axel Lin <>
Acked-by: Lars-Peter Clausen <>
Cc: (3.0+)
Signed-off-by: Guenter Roeck <>
9 years agoext4: Fix crash due to getting bogus eh_depth value on big-endian systems
Paul Mackerras [Mon, 12 Dec 2011 16:00:56 +0000 (11:00 -0500)]
ext4: Fix crash due to getting bogus eh_depth value on big-endian systems

Commit 1939dd84b3 ("ext4: cleanup ext4_ext_grow_indepth code") added a
reference to ext4_extent_header.eh_depth, but forget to pass the value
read through le16_to_cpu.  The result is a crash on big-endian
machines, such as this crash on a POWER7 server:

attempt to access beyond end of device
sda8: rw=0, want=776392648163376, limit=168558560
Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6bcb
Faulting instruction address: 0xc0000000001f5f38
cpu 0x14: Vector: 300 (Data Access) at [c000001bd1aaecf0]
    pc: c0000000001f5f38: .__brelse+0x18/0x60
    lr: c0000000002e07a4: .ext4_ext_drop_refs+0x44/0x80
    sp: c000001bd1aaef70
   msr: 9000000000009032
   dar: 6b6b6b6b6b6b6bcb
 dsisr: 40000000
  current = 0xc000001bd15b8010
  paca    = 0xc00000000ffe4600
    pid   = 19911, comm = flush-8:0
enter ? for help
[c000001bd1aaeff0c0000000002e07a4 .ext4_ext_drop_refs+0x44/0x80
[c000001bd1aaf090c0000000002e0c58 .ext4_ext_find_extent+0x408/0x4c0
[c000001bd1aaf180c0000000002e145c .ext4_ext_insert_extent+0x2bc/0x14c0
[c000001bd1aaf2c0c0000000002e3fb8 .ext4_ext_map_blocks+0x628/0x1710
[c000001bd1aaf420c0000000002b2974 .ext4_map_blocks+0x224/0x310
[c000001bd1aaf4d0c0000000002b7f2c .mpage_da_map_and_submit+0xbc/0x490
[c000001bd1aaf5a0c0000000002b8688 .write_cache_pages_da+0x2c8/0x430
[c000001bd1aaf720c0000000002b8b28 .ext4_da_writepages+0x338/0x670
[c000001bd1aaf8d0c000000000157280 .do_writepages+0x40/0x90
[c000001bd1aaf940c0000000001ea830 .writeback_single_inode+0xe0/0x530
[c000001bd1aafa00c0000000001eb680 .writeback_sb_inodes+0x210/0x300
[c000001bd1aafb20c0000000001ebc84 .__writeback_inodes_wb+0xd4/0x140
[c000001bd1aafbe0c0000000001ebfec .wb_writeback+0x2fc/0x3e0
[c000001bd1aafce0c0000000001ed770 .wb_do_writeback+0x2f0/0x300
[c000001bd1aafdf0c0000000001ed848 .bdi_writeback_thread+0xc8/0x340
[c000001bd1aafed0c0000000000c5494 .kthread+0xb4/0xc0
[c000001bd1aaff90c000000000021f48 .kernel_thread+0x54/0x70

This is due to getting ext_depth(inode) == 0x101 and therefore running
off the end of the path array in ext4_ext_drop_refs into following
unallocated structures.

This fixes it by adding the necessary le16_to_cpu.

Signed-off-by: Paul Mackerras <>
Signed-off-by: "Theodore Ts'o" <>
9 years agoext4: fix ext4_end_io_dio() racing against fsync()
Theodore Ts'o [Mon, 12 Dec 2011 15:53:02 +0000 (10:53 -0500)]
ext4: fix ext4_end_io_dio() racing against fsync()

We need to make sure iocb->private is cleared *before* we put the
io_end structure on i_completed_io_list.  Otherwise fsync() could
potentially run on another CPU and free the iocb structure out from
under us.

Reported-by: Kent Overstreet <>
Signed-off-by: "Theodore Ts'o" <>
10 years agousb: renesas_usbhs: add hcd->has_tt for low/full speed
Kuninori Morimoto [Fri, 9 Dec 2011 02:24:47 +0000 (18:24 -0800)]
usb: renesas_usbhs: add hcd->has_tt for low/full speed

Low/Full speed device is not recognized without this patch

Signed-off-by: Kuninori Morimoto <>
Signed-off-by: Felipe Balbi <>
10 years agousb: renesas_usbhs: typofix: irq_dtch control DTCHE
Kuninori Morimoto [Fri, 9 Dec 2011 02:23:56 +0000 (18:23 -0800)]
usb: renesas_usbhs: typofix: irq_dtch control DTCHE

Signed-off-by: Kuninori Morimoto <>
Signed-off-by: Felipe Balbi <>
10 years agousb: gadget: storage: release superspeed descriptors.
Yu Xu [Fri, 9 Dec 2011 16:03:33 +0000 (00:03 +0800)]
usb: gadget: storage: release superspeed descriptors.

Release superspeed mass storage descriptors memory
when the function is unbind.

Signed-off-by: Yu Xu <>
Acked-by: Michal Nazarewicz <>
Signed-off-by: Felipe Balbi <>
10 years agoARM: 7204/1: arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlier
Arnaud Patard [Sun, 11 Dec 2011 19:32:25 +0000 (20:32 +0100)]
ARM: 7204/1: arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlier

arm_dma_zone_size is used by arm_bootmem_free() which is called by
paging_init(). Thus it needs to be set before calling it.

Signed-off-by: Arnaud Patard <>
Acked-by: Nicolas Pitre <>
Signed-off-by: Russell King <>
10 years agommc: core: Fix deadlock when the CONFIG_MMC_UNSAFE_RESUME is not defined
Sujit Reddy Thumma [Wed, 23 Nov 2011 03:13:18 +0000 (08:43 +0530)]
mmc: core: Fix deadlock when the CONFIG_MMC_UNSAFE_RESUME is not defined

mmc_suspend_host() tries to claim host during suspend
and release it only when the bus suspend operation is
compeleted. If CONFIG_MMC_UNSAFE_RESUME is defined and
the host is flagged as removable, mmc_suspend_host()
tries to remove the card. In this process, the file system
sync can get blocked trying to acquire host which is already
claimed by mmc_suspend_host() causing deadlock.

Fix this deadlock by releasing host before ->remove() is called.

Signed-off-by: Sujit Reddy Thumma <>
Acked-by: Ulf Hansson <>
Acked-by: Linus Walleij <>
Signed-off-by: Chris Ball <>
10 years agommc: sdhci-s3c: Remove old and misprototyped suspend operations
Mark Brown [Mon, 21 Nov 2011 18:00:51 +0000 (18:00 +0000)]
mmc: sdhci-s3c: Remove old and misprototyped suspend operations

Now that the driver is using dev_pm_ops the suspend operations in the
platform_driver structure won't get called so don't need to be there,
and certainly shouldn't be the same function as dev_pm_ops since the
signatures are different.

Signed-off-by: Mark Brown <>
Acked-by: Jaehoon Chung <>
Signed-off-by: Chris Ball <>
10 years agommc: tmio: fix clock gating on platforms with a .set_pwr() method
Guennadi Liakhovetski [Wed, 16 Nov 2011 09:11:45 +0000 (10:11 +0100)]
mmc: tmio: fix clock gating on platforms with a .set_pwr() method

Do not power down the card in .set_ios(), unless MMC_POWER_OFF is
requested. This fixes the SDHI functionality on ecovec.

Signed-off-by: Guennadi Liakhovetski <>
Signed-off-by: Chris Ball <>
10 years agommc: sh_mmcif: fix clock gating on platforms with a .down_pwr() method
Guennadi Liakhovetski [Wed, 16 Nov 2011 09:10:41 +0000 (10:10 +0100)]
mmc: sh_mmcif: fix clock gating on platforms with a .down_pwr() method

Do not power down the card in .set_ios(), unless MMC_POWER_OFF is
requested. This fixes the MMCIF interface functionality on ecovec boards.

Signed-off-by: Guennadi Liakhovetski <>
Signed-off-by: Chris Ball <>
10 years agommc: core: Fix typo at mmc_card_sleep
Kyungmin Park [Thu, 17 Nov 2011 04:34:33 +0000 (13:34 +0900)]
mmc: core: Fix typo at mmc_card_sleep

Fix wrong bus_ops->sleep check.  (This isn't expected to have real-world
consequences, because the mmc core always defines both 'awake' and
'sleep' ops.)

Signed-off-by: Kyungmin Park <>
Signed-off-by: Chris Ball <>
10 years agommc: core: Fix power_off_notify during suspend
Girish K S [Tue, 15 Nov 2011 06:25:46 +0000 (11:55 +0530)]
mmc: core: Fix power_off_notify during suspend

The eMMC 4.5 devices respond to only RESET and AWAKE command in the
sleep state. Hence the mmc switch command to notify power off state
should be sent before the device enters sleep state.

This patch fixes the same.

Signed-off-by: Girish K S <>
Signed-off-by: Chris Ball <>
10 years agommc: core: Fix setting power notify state variable for non-eMMC
Girish K S [Fri, 4 Nov 2011 10:52:47 +0000 (16:22 +0530)]
mmc: core: Fix setting power notify state variable for non-eMMC

This patch skips the setting of the power notify state variable
for non eMMC 4.5 devices. Also fixes the problem of omap_hsmmc
noisy/broken for suspend resume reported by Kevin Hilman.

Signed-off-by: Girish K S <>
Acked-by: Ulf Hansson <>
Signed-off-by: Chris Ball <>
10 years agommc: core: Add quirk for long data read time
Stefan Nilsson XK [Thu, 3 Nov 2011 08:44:12 +0000 (09:44 +0100)]
mmc: core: Add quirk for long data read time

Adds a quirk that sets the data read timeout to a fixed value instead
of relying on the information in the CSD. The timeout value chosen
is 300ms since that has proven enough for the problematic cards found,
but could be increased if other cards require this.

This patch also enables this quirk for certain Micron cards known to
have this problem.

Signed-off-by: Stefan Nilsson XK <>
Signed-off-by: Ulf Hansson <>
Acked-by: Linus Walleij <>
Cc: <>
Signed-off-by: Chris Ball <>
10 years agommc: Add module.h include to sdhci-cns3xxx.c
Chris Ball [Sat, 12 Nov 2011 00:54:53 +0000 (19:54 -0500)]
mmc: Add module.h include to sdhci-cns3xxx.c

Fixes: drivers/mmc/host/sdhci-cns3xxx.c:110: error: 'THIS_MODULE'
       undeclared here (not in a function)

Reported-by: Al Viro <>
Signed-off-by: Chris Ball <>
10 years agommc: mxcmmc: fix falling back to PIO
Sascha Hauer [Fri, 11 Nov 2011 15:28:05 +0000 (16:28 +0100)]
mmc: mxcmmc: fix falling back to PIO

When we can't configure the dma channel we want to fall
back to PIO. We do this by setting host->do_dma to zero.
This does not work as do_dma is used to see whether dma
can be used for the current transfer. Instead, we have
to set host->dma to NULL.

Signed-off-by: Sascha Hauer <>
Cc: <>
Signed-off-by: Chris Ball <>
10 years agox86, efi: Make efi_call_phys_{prelog,epilog} CONFIG_RELOCATABLE-aware
Matt Fleming [Thu, 8 Dec 2011 12:10:50 +0000 (12:10 +0000)]
x86, efi: Make efi_call_phys_{prelog,epilog} CONFIG_RELOCATABLE-aware

efi_call_phys_prelog() sets up a 1:1 mapping of the physical address
range in swapper_pg_dir. Instead of replacing then restoring entries
in swapper_pg_dir we should be using initial_page_table which already
contains the 1:1 mapping.

It's safe to blindly switch back to swapper_pg_dir in the epilog
because the physical EFI routines are only called before
efi_enter_virtual_mode(), e.g. before any user processes have been
forked. Therefore, we don't need to track which pgd was in %cr3 when
we entered the prelog.

The previous code actually contained a bug because it assumed that the
kernel was loaded at a physical address within the first 8MB of ram,
usually at 0x100000. However, this isn't the case with a
CONFIG_RELOCATABLE=y kernel which could have been loaded anywhere in
the physical address space.

Also delete the ancient (and bogus) comments about the page table
being restored after the lock is released. There is no locking.

Cc: Matthew Garrett <>
Cc: Darrent Hart <>
Signed-off-by: Matt Fleming <>
Signed-off-by: H. Peter Anvin <>
10 years agoLinux 3.2-rc5 v3.2-rc5
Linus Torvalds [Fri, 9 Dec 2011 23:09:32 +0000 (15:09 -0800)]
Linux 3.2-rc5

10 years agoMerge git://
Linus Torvalds [Fri, 9 Dec 2011 22:45:44 +0000 (14:45 -0800)]
Merge git://

* git://
  cifs: check for NULL last_entry before calling cifs_save_resume_key
  cifs: attempt to freeze while looping on a receive attempt
  cifs: Fix sparse warning when calling cifs_strtoUCS
  CIFS: Add descriptions to the brlock cache functions

10 years agoMerge branch 'x86-urgent-for-linus' of git://
Linus Torvalds [Fri, 9 Dec 2011 22:45:12 +0000 (14:45 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'x86-urgent-for-linus' of git://
  x86, efi: Calling __pa() with an ioremap()ed address is invalid
  x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked
  x86/intel_mid: Kconfig select fix
  x86/intel_mid: Fix the Kconfig for MID selection

10 years agoMerge branch 'spi/for-3.2' of git://
Linus Torvalds [Fri, 9 Dec 2011 22:41:50 +0000 (14:41 -0800)]
Merge branch 'spi/for-3.2' of git://

* 'spi/for-3.2' of git://
  spi/gpio: fix section mismatch warning
  spi/fsl-espi: disable CONFIG_SPI_FSL_ESPI=m build
  spi/nuc900: Include linux/module.h
  spi/ath79: fix compile error due to missing include

10 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Fri, 9 Dec 2011 16:18:08 +0000 (08:18 -0800)]
Merge branch 'for-linus' of git://

* 'for-linus' of git://
  md: raid5 crash during degradation
  md/raid5: never wait for bad-block acks on failed device.
  md: ensure new badblocks are handled promptly.
  md: bad blocks shouldn't cause a Blocked status on a Faulty device.
  md: take a reference to mddev during sysfs access.
  md: refine interpretation of "hold_active == UNTIL_IOCTL".
  md/lock: ensure updates to page_attrs are properly locked.

10 years agoMerge git://
Linus Torvalds [Fri, 9 Dec 2011 16:08:57 +0000 (08:08 -0800)]
Merge git://git./linux/kernel/git/cmetcalf/linux-tile

* git://
  arch/tile: use new generic {enable,disable}_percpu_irq() routines
  drivers/net/ethernet/tile: use skb_frag_page() API
  asm-generic/unistd.h: support new process_vm_{readv,write} syscalls
  arch/tile: fix double-free bug in homecache_free_pages()
  arch/tile: add a few #includes and an EXPORT to catch up with kernel changes.

10 years agoMerge branch 'iommu/fixes' of git://
Linus Torvalds [Fri, 9 Dec 2011 16:08:14 +0000 (08:08 -0800)]
Merge branch 'iommu/fixes' of git://git./linux/kernel/git/joro/iommu

* 'iommu/fixes' of git://
  MAINTAINERS: Update amd-iommu F: patterns
  iommu/amd: Fix typo in kernel-parameters.txt
  iommu/msm: Fix compile error in mach-msm/devices-iommu.c
  Fix comparison using wrong pointer variable in dma debug code

10 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Fri, 9 Dec 2011 16:07:42 +0000 (08:07 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound

* 'for-linus' of git://
  ALSA: hda/realtek - Fix lost speaker volume controls
  ALSA: hda/realtek - Create "Bass Speaker" for two speaker pins
  ALSA: hda/realtek - Don't create extra controls with channel suffix
  ALSA: hda - Fix remaining VREF mute-LED NID check in post-3.1 changes
  ALSA: hda - Fix GPIO LED setup for IDT 92HD75 codecs
  ASoC: Provide a more complete DMA driver stub
  ASoC: Remove references to corgi and spitz from machine driver document
  ASoC: Make SND_SOC_MX27VIS_AIC32X4 depend on I2C
  ASoC: Fix dependency for SND_SOC_RAUMFELD and SND_PXA2XX_SOC_HX4700
  ASoC: uda1380: Return proper error in uda1380_modinit failure path
  ASoC: kirkwood: Make SND_KIRKWOOD_SOC_OPENRD and SND_KIRKWOOD_SOC_T5325 depend on I2C
  ASoC: Mark WM8994 ADC muxes as virtual
  ALSA: hda/realtek - Fix Oops in alc_mux_select()
  ALSA: sis7019 - give slow codecs more time to reset

10 years agoMerge branch 'perf-urgent-for-linus' of git://
Linus Torvalds [Fri, 9 Dec 2011 16:07:24 +0000 (08:07 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'perf-urgent-for-linus' of git://
  perf: Do no try to schedule task events if there are none
  lockdep, kmemcheck: Annotate ->lock in lockdep_init_map()
  perf header: Use event_name() to get an event name
  perf stat: Failure with "Operation not supported"

10 years agosys_getppid: add missing rcu_dereference
Mandeep Singh Baines [Thu, 8 Dec 2011 22:34:44 +0000 (14:34 -0800)]
sys_getppid: add missing rcu_dereference

In order to safely dereference current->real_parent inside an
rcu_read_lock, we need an rcu_dereference.

Signed-off-by: Mandeep Singh Baines <>
Cc: Thomas Gleixner <>
Cc: Pavel Emelyanov <>
Cc: Oleg Nesterov <>
Cc: Kees Cook <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agorapidio/tsi721: modify PCIe capability settings
Alexandre Bounine [Thu, 8 Dec 2011 22:34:42 +0000 (14:34 -0800)]
rapidio/tsi721: modify PCIe capability settings

Modify initialization of PCIe capability registers in Tsi721 mport driver:
 - change Completion Timeout value to avoid unexpected data transfer
   aborts during intensive traffic.
 - replace hardcoded offset of PCIe capability block by making it use the
   common function.

This patch is applicable to kernel versions starting from 3.2-rc1.

Signed-off-by: Alexandre Bounine <>
Cc: Matt Porter <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agorapidio/tsi721: fix mailbox resource reporting
Alexandre Bounine [Thu, 8 Dec 2011 22:34:36 +0000 (14:34 -0800)]
rapidio/tsi721: fix mailbox resource reporting

Bug fix for Tsi721 RapidIO mport driver: Tsi721 supports four RapidIO
mailboxes (MBOX0 - MBOX3) as defined by RapidIO specification.  Mailbox
resources has to be properly reported to allow use of all available
mailboxes (initial version reports only MBOX0).

This patch is applicable to kernel versions staring from 3.2-rc1.

Signed-off-by: Alexandre Bounine <>
Cc: Matt Porter <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agorapidio/tsi721: switch to dma_zalloc_coherent
Alexandre Bounine [Thu, 8 Dec 2011 22:34:35 +0000 (14:34 -0800)]
rapidio/tsi721: switch to dma_zalloc_coherent

Replace the pair dma_alloc_coherent()+memset() with the new
dma_zalloc_coherent() added by Andrew Morton for kernel version 3.2

Signed-off-by: Alexandre Bounine <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agoprocfs: do not overflow get_{idle,iowait}_time for nohz
Michal Hocko [Thu, 8 Dec 2011 22:34:32 +0000 (14:34 -0800)]
procfs: do not overflow get_{idle,iowait}_time for nohz

Since commit a25cac5198d4 ("proc: Consider NO_HZ when printing idle and
iowait times") we are reporting idle/io_wait time also while a CPU is
tickless.  We rely on get_{idle,iowait}_time functions to retrieve
proper data.

These functions, however, use usecs_to_cputime to translate micro
seconds time to cputime64_t.  This is just an alias to usecs_to_jiffies
which reduces the data type from u64 to unsigned int and also checks
whether the given parameter overflows jiffies_to_usecs(MAX_JIFFY_OFFSET)
and returns MAX_JIFFY_OFFSET in that case.

When we overflow depends on CONFIG_HZ but especially for CONFIG_HZ_300
it is quite low (1431649781) so we are getting MAX_JIFFY_OFFSET for
>3000s! until we overflow unsigned int.  Just for reference
CONFIG_HZ_100 has an overflow window around 20s, CONFIG_HZ_250 ~8s and
CONFIG_HZ_1000 ~2s.

This results in a bug when people saw [h]top going mad reporting 100%
CPU usage even though there was basically no CPU load.  The reason was
simply that /proc/stat stopped reporting idle/io_wait changes (and
reported MAX_JIFFY_OFFSET) and so the only change happening was for user
system time.

Let's use nsecs_to_jiffies64 instead which doesn't reduce the precision
to 32b type and it is much more appropriate for cumulative time values
(unlike usecs_to_jiffies which intended for timeout calculations).

Signed-off-by: Michal Hocko <>
Tested-by: Artem S. Tashkinov <>
Cc: Dave Jones <>
Cc: Arnd Bergmann <>
Cc: Alexey Dobriyan <>
Cc: Thomas Gleixner <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agomm: vmalloc: check for page allocation failure before vmlist insertion
Mel Gorman [Thu, 8 Dec 2011 22:34:30 +0000 (14:34 -0800)]
mm: vmalloc: check for page allocation failure before vmlist insertion

Commit f5252e00 ("mm: avoid null pointer access in vm_struct via
/proc/vmallocinfo") adds newly allocated vm_structs to the vmlist after
it is fully initialised.  Unfortunately, it did not check that
__vmalloc_area_node() successfully populated the area.  In the event of
allocation failure, the vmalloc area is freed but the pointer to freed
memory is inserted into the vmlist leading to a a crash later in

This patch adds a check for ____vmalloc_area_node() failure within
__vmalloc_node_range.  It does not use "goto fail" as in the previous
error path as a warning was already displayed by __vmalloc_area_node()
before it called vfree in its failure path.

Credit goes to Luciano Chavez for doing all the real work of identifying
exactly where the problem was.

Signed-off-by: Mel Gorman <>
Reported-by: Luciano Chavez <>
Tested-by: Luciano Chavez <>
Reviewed-by: Rik van Riel <>
Acked-by: David Rientjes <>
Cc: <> [3.1.x+]
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agomm: Ensure that pfn_valid() is called once per pageblock when reserving pageblocks
Michal Hocko [Thu, 8 Dec 2011 22:34:27 +0000 (14:34 -0800)]
mm: Ensure that pfn_valid() is called once per pageblock when reserving pageblocks

setup_zone_migrate_reserve() expects that zone->start_pfn starts at
pageblock_nr_pages aligned pfn otherwise we could access beyond an
existing memblock resulting in the following panic if
CONFIG_HOLES_IN_ZONE is not configured and we do not check pfn_valid:

  IP: [<c02d331d>] setup_zone_migrate_reserve+0xcd/0x180
  *pdpt = 0000000000000000 *pde = f000ff53f000ff53
  Oops: 0000 [#1] SMP
  Pid: 1, comm: swapper Not tainted 3.0.7-0.7-pae #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
  EIP: 0060:[<c02d331d>] EFLAGS: 00010006 CPU: 0
  EIP is at setup_zone_migrate_reserve+0xcd/0x180
  EAX: 000c0000 EBX: f5801fc0 ECX: 000c0000 EDX: 00000000
  ESI: 000c01fe EDI: 000c01fe EBP: 00140000 ESP: f2475f58
  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
  Process swapper (pid: 1, ti=f2474000 task=f2472cd0 task.ti=f2474000)
  Call Trace:
  [<c02d389c>] __setup_per_zone_wmarks+0xec/0x160
  [<c02d3a1f>] setup_per_zone_wmarks+0xf/0x20
  [<c08a771c>] init_per_zone_wmark_min+0x27/0x86
  [<c020111b>] do_one_initcall+0x2b/0x160
  [<c086639d>] kernel_init+0xbe/0x157
  [<c05cae26>] kernel_thread_helper+0x6/0xd
  Code: a5 39 f5 89 f7 0f 46 fd 39 cf 76 40 8b 03 f6 c4 08 74 32 eb 91 90 89 c8 c1 e8 0e 0f be 80 80 2f 86 c0 8b 14 85 60 2f 86 c0 89 c8 <2b> 82 b4 12 00 00 c1 e0 05 03 82 ac 12 00 00 8b 00 f6 c4 08 0f
  EIP: [<c02d331d>] setup_zone_migrate_reserve+0xcd/0x180 SS:ESP 0068:f2475f58
  CR2: 00000000000012b4

We crashed in pageblock_is_reserved() when accessing pfn 0xc0000 because
highstart_pfn = 0x36ffe.

The issue was introduced in 3.0-rc1 by 6d3163ce ("mm: check if any page
in a pageblock is reserved before marking it MIGRATE_RESERVE").

Make sure that start_pfn is always aligned to pageblock_nr_pages to
ensure that pfn_valid s always called at the start of each pageblock.
Architectures with holes in pageblocks will be correctly handled by
pfn_valid_within in pageblock_is_reserved.

Signed-off-by: Michal Hocko <>
Signed-off-by: Mel Gorman <>
Tested-by: Dang Bo <>
Reviewed-by: KAMEZAWA Hiroyuki <>
Cc: Andrea Arcangeli <>
Cc: David Rientjes <>
Cc: Arve Hjnnevg <>
Cc: KOSAKI Motohiro <>
Cc: John Stultz <>
Cc: Dave Hansen <>
Cc: <> [3.0+]
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agomm/migrate.c: pair unlock_page() and lock_page() when migrating huge pages
Hillf Danton [Thu, 8 Dec 2011 22:34:20 +0000 (14:34 -0800)]
mm/migrate.c: pair unlock_page() and lock_page() when migrating huge pages

Avoid unlocking and unlocked page if we failed to lock it.

Signed-off-by: Hillf Danton <>
Cc: Naoya Horiguchi <>
Cc: Andrea Arcangeli <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agothp: set compound tail page _count to zero
Youquan Song [Thu, 8 Dec 2011 22:34:18 +0000 (14:34 -0800)]
thp: set compound tail page _count to zero

Commit 70b50f94f1644 ("mm: thp: tail page refcounting fix") keeps all
page_tail->_count zero at all times.  But the current kernel does not
set page_tail->_count to zero if a 1GB page is utilized.  So when an
IOMMU 1GB page is used by KVM, it wil result in a kernel oops because a
tail page's _count does not equal zero.

  kernel BUG at include/linux/mm.h:386!
  invalid opcode: 0000 [#1] SMP
  Call Trace:
    ? trace_hardirqs_off+0xd/0xf
  RIP  gup_huge_pud+0xf2/0x159

Signed-off-by: Youquan Song <>
Reviewed-by: Andrea Arcangeli <>
Cc: <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agothp: add compound tail page _mapcount when mapped
Youquan Song [Thu, 8 Dec 2011 22:34:16 +0000 (14:34 -0800)]
thp: add compound tail page _mapcount when mapped

With the 3.2-rc kernel, IOMMU 2M pages in KVM works.  But when I tried
to use IOMMU 1GB pages in KVM, I encountered an oops and the 1GB page
failed to be used.

The root cause is that 1GB page allocation calls gup_huge_pud() while 2M
page calls gup_huge_pmd.  If compound pages are used and the page is a
tail page, gup_huge_pmd() increases _mapcount to record tail page are
mapped while gup_huge_pud does not do that.

So when the mapped page is relesed, it will result in kernel oops
because the page is not marked mapped.

This patch add tail process for compound page in 1GB huge page which
keeps the same process as 2M page.

Reproduce like:
1. Add grub boot option: hugepagesz=1G hugepages=8
2. mount -t hugetlbfs -o pagesize=1G hugetlbfs /dev/hugepages
3. qemu-kvm -m 2048 -hda os-kvm.img -cpu kvm64 -smp 4 -mem-path /dev/hugepages
-net none -device pci-assign,host=07:00.1

  kernel BUG at mm/swap.c:114!
  invalid opcode: 0000 [#1] SMP
  Call Trace:
  RIP  put_compound_page+0xd4/0x168

Signed-off-by: Youquan Song <>
Reviewed-by: Andrea Arcangeli <>
Cc: Andi Kleen <>
Cc: <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agoprintk: avoid double lock acquire
Peter Zijlstra [Thu, 8 Dec 2011 22:34:13 +0000 (14:34 -0800)]
printk: avoid double lock acquire

Commit 4f2a8d3cf5e ("printk: Fix console_sem vs logbuf_lock unlock race")
introduced another silly bug where we would want to acquire an already
held lock.  Avoid this.

Reported-by: Andrea Arcangeli <>
Signed-off-by: Peter Zijlstra <>
Cc: Ingo Molnar <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agomemcg: update maintainers
KAMEZAWA Hiroyuki [Thu, 8 Dec 2011 22:34:10 +0000 (14:34 -0800)]
memcg: update maintainers

More players joined to memory cgroup developments and Johannes' great work
changed internal design of memory cgroup dramatically.  And he will do
more works.  Michal Hokko did many bug fixes and know memory cgroup very
well.  Daisuke Nishimura helped us very much but he seems busy now.
Thanks to his works.

Signed-off-by: KAMEZAWA Hiroyuki <>
Acked-by: Michal Hocko <>
Acked-by: Johannes Weiner <>
Acked-by: Daisuke Nishimura <>
Cc: Balbir Singh <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agodrivers/rtc/rtc-s3c.c: fix driver clock enable/disable balance issues
Jonghwan Choi [Thu, 8 Dec 2011 22:34:02 +0000 (14:34 -0800)]
drivers/rtc/rtc-s3c.c: fix driver clock enable/disable balance issues

If an error occurs after the clock is enabled, the enable/disable state
can become unbalanced.

Signed-off-by: Jonghwan Choi <>
Cc: Alessandro Zummo <>
Acked-by: Kukjin Kim <>
Cc: <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agoCREDITS: update Kees's expired fingerprint and fix details
Kees Cook [Thu, 8 Dec 2011 22:34:00 +0000 (14:34 -0800)]
CREDITS: update Kees's expired fingerprint and fix details

Small clean-up for my CREDITS entry; the GPG fingerprint was not up to
date, so I fixed other details at the same time too.

Signed-off-by: Kees Cook <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agothp: reduce khugepaged freezing latency
Andrea Arcangeli [Thu, 8 Dec 2011 22:33:57 +0000 (14:33 -0800)]
thp: reduce khugepaged freezing latency

khugepaged can sometimes cause suspend to fail, requiring that the user
retry the suspend operation.

Use wait_event_freezable_timeout() instead of
schedule_timeout_interruptible() to avoid missing freezer wakeups.  A
try_to_freeze() would have been needed in the khugepaged_alloc_hugepage
tight loop too in case of the allocation failing repeatedly, and
wait_event_freezable_timeout will provide it too.

khugepaged would still freeze just fine by trying again the next minute
but it's better if it freezes immediately.

Reported-by: Jiri Slaby <>
Signed-off-by: Andrea Arcangeli <>
Tested-by: Jiri Slaby <>
Cc: Tejun Heo <>
Cc: Oleg Nesterov <>
Cc: "Srivatsa S. Bhat" <>
Cc: "Rafael J. Wysocki" <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agofs/proc/meminfo.c: fix compilation error
Claudio Scordino [Thu, 8 Dec 2011 22:33:56 +0000 (14:33 -0800)]
fs/proc/meminfo.c: fix compilation error

Fix the error message "directives may not be used inside a macro argument"
which appears when the kernel is compiled for the cris architecture.

Signed-off-by: Claudio Scordino <>
Cc: Andrea Arcangeli <>
Cc: <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agovmscan: use atomic-long for shrinker batching
Konstantin Khlebnikov [Thu, 8 Dec 2011 22:33:54 +0000 (14:33 -0800)]
vmscan: use atomic-long for shrinker batching

Use atomic-long operations instead of looping around cmpxchg().

[ massage atomic.h inclusions]
Signed-off-by: Konstantin Khlebnikov <>
Cc: Dave Chinner <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agovmscan: fix initial shrinker size handling
Konstantin Khlebnikov [Thu, 8 Dec 2011 22:33:51 +0000 (14:33 -0800)]
vmscan: fix initial shrinker size handling

A shrinker function can return -1, means that it cannot do anything
without a risk of deadlock.  For example prune_super() does this if it
cannot grab a superblock refrence, even if nr_to_scan=0.  Currently we
interpret this -1 as a ULONG_MAX size shrinker and evaluate `total_scan'
according to this.  So the next time around this shrinker can cause
really big pressure.  Let's skip such shrinkers instead.

Also make total_scan signed, otherwise the check (total_scan < 0) below
never works.

Signed-off-by: Konstantin Khlebnikov <>
Cc: Dave Chinner <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
10 years agoMAINTAINERS: Update amd-iommu F: patterns
Joe Perches [Fri, 9 Dec 2011 04:21:40 +0000 (20:21 -0800)]
MAINTAINERS: Update amd-iommu F: patterns

Commit 29b68415e335 ("x86: amd_iommu: move to drivers/iommu/")
moved the files, update the patterns.

CC: Ohad Ben-Cohen <>
CC: Joerg Roedel <>
Signed-off-by: Joe Perches <>
Signed-off-by: Joerg Roedel <>
10 years agox86, efi: Calling __pa() with an ioremap()ed address is invalid
Matt Fleming [Fri, 18 Nov 2011 13:09:11 +0000 (13:09 +0000)]
x86, efi: Calling __pa() with an ioremap()ed address is invalid

If we encounter an efi_memory_desc_t without EFI_MEMORY_WB set
in ->attribute we currently call set_memory_uc(), which in turn
calls __pa() on a potentially ioremap'd address.

On CONFIG_X86_32 this is invalid, resulting in the following
oops on some machines:

  BUG: unable to handle kernel paging request at f7f22280
  IP: [<c10257b9>] reserve_ram_pages_type+0x89/0x210

  Call Trace:
   [<c104f8ca>] ? page_is_ram+0x1a/0x40
   [<c1025aff>] reserve_memtype+0xdf/0x2f0
   [<c1024dc9>] set_memory_uc+0x49/0xa0
   [<c19334d0>] efi_enter_virtual_mode+0x1c2/0x3aa
   [<c19216d4>] start_kernel+0x291/0x2f2
   [<c19211c7>] ? loglevel+0x1b/0x1b
   [<c19210bf>] i386_start_kernel+0xbf/0xc8

A better approach to this problem is to map the memory region
with the correct attributes from the start, instead of modifying
it after the fact. The uncached case can be handled by
ioremap_nocache() and the cached by ioremap_cache().

Despite first impressions, it's not possible to use
ioremap_cache() to map all cached memory regions on
CONFIG_X86_64 because EFI_RUNTIME_SERVICES_DATA regions really
don't like being mapped into the vmalloc space, as detailed in
the following bug report,

Therefore, we need to ensure that any EFI_RUNTIME_SERVICES_DATA
regions are covered by the direct kernel mapping table on
CONFIG_X86_64. To accomplish this we now map E820_RESERVED_EFI
regions via the direct kernel mapping with the initial call to
init_memory_mapping() in setup_arch(), whereas previously these
regions wouldn't be mapped if they were after the last E820_RAM
region until efi_ioremap() was called. Doing it this way allows
us to delete efi_ioremap() completely.

Signed-off-by: Matt Fleming <>
Cc: H. Peter Anvin <>
Cc: Matthew Garrett <>
Cc: Zhang Rui <>
Cc: Huang Ying <>
Cc: Linus Torvalds <>
Cc: Andrew Morton <>
Signed-off-by: Ingo Molnar <>
10 years ago... and the same kind of leak for mqueue
Al Viro [Fri, 9 Dec 2011 05:38:50 +0000 (00:38 -0500)]
... and the same kind of leak for mqueue

Signed-off-by: Al Viro <>
10 years agoprocfs: fix a vfsmount longterm reference leak
Al Viro [Fri, 9 Dec 2011 04:20:45 +0000 (23:20 -0500)]
procfs: fix a vfsmount longterm reference leak

kern_mount() doesn't pair with plain mntput()...

Signed-off-by: Al Viro <>
10 years agocifs: check for NULL last_entry before calling cifs_save_resume_key
Jeff Layton [Fri, 2 Dec 2011 01:23:34 +0000 (20:23 -0500)]
cifs: check for NULL last_entry before calling cifs_save_resume_key

Prior to commit eaf35b1, cifs_save_resume_key had some NULL pointer
checks at the top. It turns out that at least one of those NULL
pointer checks is needed after all.

When the LastNameOffset in a FIND reply appears to be beyond the end of
the buffer, CIFSFindFirst and CIFSFindNext will set srch_inf.last_entry
to NULL. Since eaf35b1, the code will now oops in this situation.

Fix this by having the callers check for a NULL last entry pointer
before calling cifs_save_resume_key. No change is needed for the
call site in cifs_readdir as it's not reachable with a NULL
current_entry pointer.

This should fix:

Cc: Christoph Hellwig <>
Reported-by: Adam G. Metzler <>
Signed-off-by: Jeff Layton <>
Signed-off-by: Steve French <>
10 years agocifs: attempt to freeze while looping on a receive attempt
Jeff Layton [Fri, 2 Dec 2011 01:22:41 +0000 (20:22 -0500)]
cifs: attempt to freeze while looping on a receive attempt

In the recent overhaul of the demultiplex thread receive path, I
neglected to ensure that we attempt to freeze on each pass through the
receive loop.

Reported-and-Tested-by: Woody Suwalski <>
Reported-and-Tested-by: Adam Williamson <>
Signed-off-by: Jeff Layton <>
Signed-off-by: Steve French <>
10 years agocifs: Fix sparse warning when calling cifs_strtoUCS
Steve French [Thu, 10 Nov 2011 18:48:20 +0000 (12:48 -0600)]
cifs: Fix sparse warning when calling cifs_strtoUCS

Fix sparse endian check warning while calling cifs_strtoUCS

CHECK   fs/cifs/smbencrypt.c
fs/cifs/smbencrypt.c:216:37: warning: incorrect type in argument 1
(different base types)
fs/cifs/smbencrypt.c:216:37:    expected restricted __le16 [usertype] *<noident>
fs/cifs/smbencrypt.c:216:37:    got unsigned short *<noident>

Signed-off-by: Steve French <>
Acked-by: Shirish Pargaonkar <
10 years agoCIFS: Add descriptions to the brlock cache functions
Pavel Shilovsky [Mon, 7 Nov 2011 13:11:24 +0000 (16:11 +0300)]
CIFS: Add descriptions to the brlock cache functions

Signed-off-by: Pavel Shilovsky <>
Signed-off-by: Steve French <>
10 years agomd: raid5 crash during degradation
Adam Kwolek [Fri, 9 Dec 2011 03:26:11 +0000 (14:26 +1100)]
md: raid5 crash during degradation

NULL pointer access causes crash in raid5 module.

Signed-off-by: Adam Kwolek <>
Signed-off-by: NeilBrown <>
10 years agoMerge branch 'timers-urgent-for-linus' of git://
Linus Torvalds [Thu, 8 Dec 2011 21:21:28 +0000 (13:21 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'timers-urgent-for-linus' of git://
  alarmtimers: Fix time comparison
  ptp: Fix clock_getres() implementation

10 years agoMerge branch 'for-linus' of git://
Linus Torvalds [Thu, 8 Dec 2011 21:18:59 +0000 (13:18 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

* 'for-linus' of git://
  Btrfs: drop spin lock when memory alloc fails
  Btrfs: check if the to-be-added device is writable
  Btrfs: try cluster but don't advance in search list
  Btrfs: try to allocate from cluster even at LOOP_NO_EMPTY_SIZE