sgi-xp: add _sn2 suffix to a few variables

Add an '_sn2' suffix to some variables found in xpc_sn2.c.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: isolate remote copy buffer to sn2 only

Make the remote copy buffer an sn2 only item.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: enable XPNET to handle more than 64 partitions

Enable XPNET to support more than 64 partitions.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: isolate allocation of XPC's msgqueues to sn2 only

Move the allocation of XPC's msgqueues to xpc_sn2.c.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: replace AMO_t typedef by struct amo

Replace the AMO_t typedef by a direct reference to 'struct amo'.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: separate chctl_flags from XPC's notify IRQ

Tie current IPI references to either XPC's notify IRQ or channel control
flags.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: isolate additional sn2 specific code

Move additional sn2 specific code into xpc_sn2.c.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: isolate activate IRQ's hardware specific components

Isolate architecture specific code related to XPC's activate IRQ.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: move xpc_allocate() into xpc_send()/xpc_send_notify()

Move xpc_allocate() functionality into xpc_send()/xpc_send_notify() so
xpc_allocate() no longer needs to be called by XPNET.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: base xpc_rsvd_page's timestamp on jiffies

Change XPC's reserved page timestamp to be based on jiffies.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: isolate xpc_vars structure to sn2 only

Isolate the xpc_vars structure of XPC's reserved page to sn2 only.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: isolate xpc_vars_part structure to sn2 only

Isolate the xpc_vars_part structure of XPC's reserved page to sn2 only.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: prepare xpc_rsvd_page to work on either sn2 or uv hardware

Prepare XPC's reserved page header to work for either sn2 or uv.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: create a common xp_remote_memcpy() function

Create a common remote memcpy function that maps to what the hardware
booted supports.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: support runtime selection of xp_max_npartitions

Support runtime selection of the max number of partitions based on the
hardware being run on.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: define BYTES_PER_WORD

Add a BYTES_PER_WORD #define.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: define xpSalError reason code

Define xpSalError reason code.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xp: define is_shub() and is_uv() macros

Define the is_shub()/is_uv() macros if they've not already been defined.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver V3: fixes to resolve code review comments

Fixes problems identified in a code review:
- add comment with high level dscription of the GRU
- prepend "gru_" to all global names
- delete unused function
- couple of trivial bug fixes

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: driver/misc Makefile & Kconfig changes

Driver/misc changes for the GRU driver

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: export is_uv_system(), zap_page_range() & follow_page()

Exports needed by the GRU driver.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: driver makefile

This patch adds the GRU driver makefile

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: TLB flushing, MMUOPS callouts

This file contains the functions for handlinf GRU TLB flushing, This
includes functions to handle the MMUOPS callouts.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: /proc interfaces

This file externalizes some GRU state & statistics to the user using the
/proc file system.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: resource management

This file contains functions realted to managing GRU resources provided to
the user.  Examples include GRU context assignment, load, unload,
migration, etc..

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: kernel services provide by driver

This file contains functions for handling services provided to other
kernel modules that use the GRU.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: page faults & exceptions

This file contains the functions that manage GRU page faults and
exceptions.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: driver initialization, file & vma ops

This file contains the functions for initializing the driver, handling
file & vma operations and for processing IOCTL requests from the user.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: kernel services header files

This patch contains the header file used to export GRU services to other
kernel drivers such as XPMEM or XPNET.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: driver internal header files

This patch contains header files internal to the GRU driver.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: GRU instructions & macros

This patchs contains macros & inline functions used to issue instructions
to the GRU.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GRU Driver: hardware data structures

This series of patches adds a driver for the SGI UV GRU.  The driver is
still in development but it currently compiles for both x86_64 & IA64.
All simple regression tests pass on IA64.  Although features remain to be
added, I'd like to start the process of getting the driver into the
kernel.  Additional kernel drivers will depend on services provide by the
GRU driver.

The GRU is a hardware resource located in the system chipset.  The GRU
contains memory that is mmaped into the user address space.  This memory
is used to communicate with the GRU to perform functions such as
load/store, scatter/gather, bcopy, AMOs, etc.  The GRU is directly
accessed by user instructions using user virtual addresses.  GRU
instructions (ex., bcopy) use user virtual addresses for operands.

The GRU contains a large TLB that is functionally very similar to
processor TLBs.  Because the external contains a TLB with user virtual
address, it requires callouts from the core VM system when certain types
of changes are made to the process page tables.  There are several MMUOPS
patches currently being discussed but none has been accepted into the
kernel.  The GRU driver is built using version V18 from Andrea Arcangeli.

This patch:

Contains the definitions of the hardware GRU data structures that are used
by the driver to manage the GRU.

[akpm@linux-foundation;org: export hpage_shift]
Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: add zap_vma_ptes(): a library function to unmap driver ptes

zap_vma_ptes() is intended to be used by drivers to unmap ptes assigned to the
driver private vmas.  This interface is similar to zap_page_range() but is
less general & less likely to be abused.

Needed by the GRU driver.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sched: make scheduler sysfs attributes sysdev class devices

They are really class devices, but were incorrectly declared.  This
leads to crashes with the recent changes that makes non normal sysdevs
use a different prototype.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-dev: stop periodic interrupts on device release

Solves http://bugzilla.kernel.org/show_bug.cgi?id=11127

The old rtc.c driver did it and some drivers (like rtc-sh) do it in their
release function, though they should not -- because they should provide
the irq_set_state op and the rtc framework itself should care about it.
This patch makes it do so.

I am aware that some drivers, like rtc-sh, handle userspace PIE sets in
their ioctl op (instead of having the framework call the op), exporting
the irq_set_state op at the same time.  The logic in rtc_irq_set_state
should make sure it doesn't matter and the driver should not need to care
stopping periodic interrupts in its release routine any more.

The correct way, in my opinion, should be this:
1) The driver provides the irq_set_state op and does not care closing the
   interrupts in its release op.
2) If the driver does not provide the op and handles PIE in the ioctl op, it's
   reponsible for closing them in its release op.
3) Something similar for other IRQs, like UIE -- if there's no in-kernel API
   like irq_set_state, handle it in ioctl and release ops. The framework will
   be responsible either for everything or for nothing. (This will probably
   change later.)

Signed-off-by: Tomas Janousek <tomi@nomi.cz>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gbefb: cmap FIFO timeout

Writes to the cmap fifo while the display is blanked caused cmap FIFO
timeout messages and a wrong colormap.  To avoid this the driver now
maintains a colormap in memory and updates the colormap after the display
is unblanked.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

workqueues: add comments to __create_workqueue_key()

Dmitry Adamushko pointed out that the error handling in
__create_workqueue_key() is not clear, add the comment.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/buffer.c: uninline __remove_assoc_queue()

Uninline the __remove_assoc_queue() function in fs/buffer.c, called at too
many places and too long to really be inlined.  Size results:

   text    data     bss     dec     hex filename
1134606  118840  212992 1466438  166046 vmlinux.old
1134303  118840  212992 1466135  165f17 vmlinux
   -303       0       0    -303    -12F +/-

This patch is part of the Linux Tiny project and has been originally
written by Matt Mackall <mpm@selenic.com>.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omfs: sparse annotations

Missing cpu_to_be64 on some constant assignments.
fs/omfs/dir.c:107:16: warning: incorrect type in assignment (different base types)
fs/omfs/dir.c:107:16:    expected restricted __be64 [usertype] i_sibling
fs/omfs/dir.c:107:16:    got unsigned long long
fs/omfs/file.c:33:13: warning: incorrect type in assignment (different base types)
fs/omfs/file.c:33:13:    expected restricted __be64 [usertype] e_next
fs/omfs/file.c:33:13:    got unsigned long long
fs/omfs/file.c:36:24: warning: incorrect type in assignment (different base types)
fs/omfs/file.c:36:24:    expected restricted __be64 [usertype] e_cluster
fs/omfs/file.c:36:24:    got unsigned long long
fs/omfs/file.c:37:23: warning: incorrect type in assignment (different base types)
fs/omfs/file.c:37:23:    expected restricted __be64 [usertype] e_blocks
fs/omfs/file.c:37:23:    got unsigned long long

fs/omfs/bitmap.c:74:18: warning: incorrect type in argument 2 (different signedness)
fs/omfs/bitmap.c:74:18:    expected unsigned long volatile *addr
fs/omfs/bitmap.c:74:18:    got long *<noident>
fs/omfs/bitmap.c:77:20: warning: incorrect type in argument 2 (different signedness)
fs/omfs/bitmap.c:77:20:    expected unsigned long volatile *addr
fs/omfs/bitmap.c:77:20:    got long *<noident>
fs/omfs/bitmap.c:112:17: warning: incorrect type in argument 2 (different signedness)
fs/omfs/bitmap.c:112:17:    expected unsigned long volatile *addr
fs/omfs/bitmap.c:112:17:    got long *<noident>

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/mod/modpost.c: fix spelling of module and happens

Spelling fixes in scripts/mod/modpost.c

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

remove drivers/serial/v850e_uart.c

The removal of drivers/serial/v850e_uart.c originally was in my v850
removal patch, but it seems it got lost somewhere.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

USB: m66592-udc: Fix up dev_set_name() badness.

Commit 0031a06e2f07ab0d1bc98c31dbb6801f95f4bf01 converted all of the USB
drivers to use dev_set_name(), though there was a typo on the m66592-udc
conversion that handed off the wrong pointer (we want the struct device
here obviously, not the struct usb_gadget).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

introduce lower_32_bits() macro

The file kernel.h contains the upper_32_bits macro.  This patch adds the
other part, the lower_32_bits macro.  Its first use will be in the driver
for AMD IOMMU.

Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

do_try_to_free_page: update comments related to vmscan functions

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

swapfile/vmscan: update comments related to vmscan functions

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

swap: update function comment of release_pages

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

madvise: update function comment of madvise_dontneed

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: fix comment for printk ratelimiting

The comment assumed the burst to be one and the ratelimit used to be named
printk_ratelimit_jiffies.

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Char: mxser, ratelimit ioctl warning

The GET_MAJOR ioctl prints out a warning, make it ratelimited.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

initrd: cast `initrd_start' to `void *'

commit fb6624ebd912e3d6907ca6490248e73368223da9 (initrd: Fix virtual/physical
mix-up in overwrite test) introduced the compiler warning below on mips,
as its virt_to_page() doesn't cast the passed address to unsigned long
internally, unlike on most other architectures:

init/main.c: In function `start_kernel':
init/main.c:633: warning: passing argument 1 of `virt_to_phys' makes pointer from integer without a cast
init/main.c:636: warning: passing argument 1 of `virt_to_phys' makes pointer from integer without a cast

For now, kill the warning by explicitly casting initrd_start to `void *', as
that's the type it should really be.

Reported-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: fix tty-related build error

/home/wangcong/Projects/linux-2.6/arch/um/drivers/line.c: In function `line_write_interrupt':
/home/wangcong/Projects/linux-2.6/arch/um/drivers/line.c:366: error: `struct tty_ldisc' has no member named `write_wakeup'
/home/wangcong/Projects/linux-2.6/arch/um/drivers/line.c:367: error: `struct tty_ldisc' has no member named `write_wakeup'

Signed-off-by: WANG Cong <wangcong@zeuux.org>
Cc: Jeff Dike <jdike@addtoit.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

connector: add a BlackBoard user to connector

Add a BlackBoard user to connector.  BlackBoard is part of the TSP GPL
sampling framework (http://savannah.nongnu.org/p/tsp)

[akpm@linux-foundation.org: add comment]
Signed-off-by: Jerome Arbez-Gindre <jeromearbezgindre@gmail.com>
Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

print_ip_sym(): use %pS

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8250.c: port.lock is irq-safe

serial8250_startup() doesn't disable interrupts while taking the &up->port.lock
which might race against the interrupt handler serial8250_interrupt(), which
when entered, will deadlock waiting for the lock to be released.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

markers: fix markers read barrier for multiple probes

Paul pointed out two incorrect read barriers in the marker handler code in
the path where multiple probes are connected.  Those are ordering reads of
"ptype" (single or multi probe marker), "multi" array pointer, and "multi"
array data access.

It should be ordered like this :

read ptype
smp_rmb()
read multi array pointer
smp_read_barrier_depends()
access data referenced by multi array pointer

The code with a single probe connected (optimized case, does not have to
allocate an array) has correct memory ordering.

It applies to kernel 2.6.26.x, 2.6.25.x and linux-next.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: don't return -EBUSY when mutex_lock_interruptible() fails

It was pointed out that the RTC framework handles its mutex locks oddly
...  returning -EBUSY when interrupted.  This fixes that by returning the
value of mutex_lock_interruptible() (i.e.  -EINTR).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video: release mutex in error handling code

The mutex is released on a successful return, so it would seem that it
should be released on an error return as well.

The semantic patch finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression l;
@@

mutex_lock(l);
... when != mutex_unlock(l)
    when any
    when strict
(
if (...) { ... when != mutex_unlock(l)
+   mutex_unlock(l);
    return ...;
}
|
mutex_unlock(l);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: Ondrej Zajicek <santiago@crfreenet.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hpwdt: don't use static flags

Static (read: global) is potential problem.  Two threads can corrupt each
other's interrupt status, better avoid this.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Thomas Mingarelli <thomas.mingarelli@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

iscsi_ibft_find: fix modpost warning

Exporting __init functions is wrong.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: ensure platform_lcd on by default

It seems that we need to ensure that the lcd is powered up at start,
otherwise we do not see a display.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpuset: clean up cpuset hierarchy traversal code

Use cpuset.stack_list rather than kfifo, so we avoid memory allocation
for kfifo.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpuset: fix wrong calculation of relax domain level

When multiple cpusets are overlapping in their 'cpus' and hence they
form a single sched domain, the largest sched_relax_domain_level among
those should be used. But when top_cpuset's sched_load_balance is
set, its sched_relax_domain_level is used regardless other sub-cpusets'.

This patch fixes it by walking the cpuset hierarchy to find the largest
sched_relax_domain_level.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpuset: speed up sched domain partition

All child cpusets contain a subset of the parent's cpus, so we can skip
them when partitioning sched domains. This decreases 'csa' greately for
cpusets with multi-level hierarchy.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpuset: a bit cleanup for scan_for_empty_cpusets()

clean up hierarchy traversal code

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: remove redundant check in move_task()

It's guaranteed by cgroup that old_cgrp != cgrp.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroup: uninline cgroup_has_css_refs()

It's not small enough, and has 2 call sites.

 text    data     bss     dec     hex filename
12813    1676    4832   19321    4b79 cgroup.o.orig
12775    1676    4832   19283    4b53 cgroup.o

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroup: remove duplicate code in allocate_cg_link()

- just call free_cg_links() in allocate_cg_links()
- the list will get initialized in allocate_cg_links(), so don't init
  it twice

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cgroup: fix possible memory leak

There's a leak if copy_from_user() returns failure.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove find_max_pfn_with_active_regions

It has no user now

Also print out info about adding/removing active regions.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

VFS: increase pseudo-filesystem block size to PAGE_SIZE

This commit:

    commit ba52de123d454b57369f291348266d86f4b35070
    Author: Theodore Ts'o <tytso@mit.edu>
    Date:   Wed Sep 27 01:50:49 2006 -0700

        [PATCH] inode-diet: Eliminate i_blksize from the inode structure

caused the block size used by pseudo-filesystems to decrease from
PAGE_SIZE to 1024 leading to a doubling of the number of context switches
during a kernbench run.

Signed-off-by: Alex Nixon <Alex.Nixon@citrix.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ian Campbell <Ian.Campbell@eu.citrix.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sticore: don't activate unsupported GSC STI cards on HPPA

On HPPA there exists some older GSC graphics cards, which need special
graphic-card-BIOS patching to become supported.  Since we don't have yet
implemented the patching, it's better to detect such cards in advance,
inform to the user that there are known problems and to not activate the
card.

Problematic GSC cards and BIOS versions are:
* Hyperdrive/Hyperbowl (A4071A) graphics card series:
   * ID = 0x2BCB015A (Version 8.04/8)
   * ID = 0x2BCB015A (Version 8.04/11)
* Thunder 1 VISUALIZE 48 card:
   * ID = 0x2F23E5FC (Version 8.05/9)
* Thunder 2 VISUALIZE 48 XP card:
   * ID = 0x2F8D570E (Version 8.05/12)
* Some Hyperion and ThunderHawk GSC cards

Further details are described here:
http://parisc-linux.org/faq/graphics-howto.html

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

acpi cpufreq cleanup: move bailing out of function before locking the mutex

Signed-off-by: Thomas Renninger <trenn@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpufreq acpi: only call _PPC after cpufreq ACPI init funcs got called already

Ingo Molnar provided a fix to not call _PPC at processor driver
initialization time in "[PATCH] ACPI: fix cpufreq regression" (git
commit e4233dec749a3519069d9390561b5636a75c7579)

But it can still happen that _PPC is called at processor driver
initialization time.

This patch should make sure that this is not possible anymore.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

resource: add resource_size()

Avoid one-off errors by introducing a resource_size() function.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: give platform_lcd the same name as the platform device.

When registering an platform_lcd, use the name of the platform device
specified in case there are more than one platform_lcd backlights
registered.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[MTD] MTD_DEBUG always does compile-time typechecks

The current style for debug messages is to ensure they're always
parsed by the compiler and then subjected to dead code removal.
That way builds won't break only when debug options get enabled,
which is common when they are stripped out early by CPP.

This patch makes CONFIG_MTD_DEBUG adopt that convention.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

[MTD] DataFlash: bugfix, binary page sizes now handled

The wrong version of the "teach dataflash about binary density" patch
just got merged (v2 not v3) ... this restores the missing updates:

  * Fix the cmdlinepart *regression* that caused testing failures (!!)
    by restoring the original part labels in relevant cases.

  * Don't reference things that don't exist (!)
- An opcode that doesn't even exist for DataFlash
- The part is "at45db642" not "at45db641"
- ID zero in this JEDEC table

  * Make the JEDEC probe routine report and handle errors better:
- If the SPI calls fail, return the error codes.
- Don't depend on ordering of table entries.
- Unrecognized ids are different from parts that have no ID.
          We won't actually know how to handle them correctly; display
  the ID and ignore the chip.

  * Move the original block comment about the "legacy" chip ID scheme
    back next to the code to which it applies ... not next to the new
    JEDEC query code, which uses an entirely different strategy.

  * Don't print a guessed erasesize; /proc/mtd has the real value.

And add a few more comments.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

[MTD] [NAND] fsl_elbc_nand.c: fix printk warning

drivers/mtd/nand/fsl_elbc_nand.c:890: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'resource_size_t'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

[MTD] [NAND] nandsim: support random page read command

Commit 3d45955962496879dead8d4dd70bb9a23b07154b ("subpage read feature
as a way to improve performance") broke nandsim because nandsim does not
support the "random page read" NAND command. This patch adds
corresponding support.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

[MTD] [NAND] fix subpage read for small page NAND

Current implementation of subpage read feature for NAND has issues with
small page devices. Small page NAND do not support RNDOUT command.
So subpage feature is not applicable for them.

This patch disables support of subpage for small page NAND.
The code is verified on nandsim(SP NAND simulation) and on LP NAND
devices.

Thanks a lot to Artem for finding this issue.

Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

net: Make "networking" one-click deselectable.

Use a menuconfig directive to make all of networking support one-click
deselectable from the top-level menu.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Fix useless proc net sockstat6 removal

This call is no longer needed, sockstat6 is per namespace so it is
removed at the namespace subsystem destruction.

Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: MD5: Use MIB counter instead of warning for MD5 mismatch.

From a report by Matti Aarnio, and preliminary patch by Adam Langley.

Signed-off-by: David S. Miller <davem@davemloft.net>

pkt_sched: Fix OOPS on ingress qdisc add.

Bug report from Steven Jan Springl:

Issuing the following command causes a kernel oops:
tc qdisc add dev eth0 handle ffff: ingress

The problem mostly stems from all of the special case handling of
ingress qdiscs.

So, to fix this, do the grafting operation the same way we do for TX
qdiscs.  Which means that dev_activate() and dev_deactivate() now do
the "qdisc_sleeping <--> qdisc" transitions on dev->rx_queue too.

Future simplifications are possible now, mainly because it is
impossible for dev_queue->{qdisc,qdisc_sleeping} to be NULL.  There
are NULL checks all over to handle the ingress qdisc special case
that used to exist before this commit.

Signed-off-by: David S. Miller <davem@davemloft.net>

regulator: TI bq24022 Li-Ion Charger driver

This adds a regulator driver for the TI bq24022 Single-Chip
Li-Ion Charger with its nCE and ISET2 pins connected to GPIOs.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>

regulator: maintainers - add maintainers for regulator framework.

Adds Liam Girdwood and Mark Brown as regulator framework maintainers.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>

regulator: documentation - ABI

This adds documentation describing the sysfs ABI used by the regulator
framework.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>

regulator: documentation - machine

This adds documenation describing the regulator machine interface.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>

regulator: documentation - regulator driver

This adds documentation describing the regulator driver interface.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>

regulator: documentation - consumer interface

This adds documentation describing the consumer device interface.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>

regulator: documentation - overview

This adds overview documentation describing the regulator framework and
nomenclature used in the interface specific documentation and code.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>

regulator: core kbuild files

This patch adds kernel build support for the regulator core.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>

regulator: regulator test harness

This provides a virtual regulator test harness which exposes a sysfs
interface for setting power requirements, intended for test purposes only.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>

regulator: add support for fixed regulators.

This adds supports for regulator that are not software controlable. It allows
them to coexist in systems with mixed supplies.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>

regulator: regulator framework core

This adds the regulator framework core.

This framework is designed to provide a generic interface to voltage
and current regulators within the Linux kernel. It's intended to
provide voltage and current control to client or consumer drivers and
also provide status information to user space applications through a
sysfs interface.

The intention is to allow systems to dynamically control regulator
output in order to save power and prolong battery life. This applies
to both voltage regulators (where voltage output is controllable) and
current sinks (where current output is controllable).

This framework safely compiles out if not selected so that client
drivers can still be used in systems with no software controllable
regulators.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

regulator: fixed regulator interface

This patch adds support for fixed regulators. This class of regulator is
not software controllable but can coexist on machines with software
controlable regulators.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>

regulator: machine driver interface

This interface is for machine specific code and allows the creation of
voltage/current domains (with constraints) for each regulator. It can
provide regulator constraints that will prevent device damage through
overvoltage or over current caused by buggy client drivers. It also
allows the creation of a regulator tree whereby some regulators are
supplied by others (similar to a clock tree).

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

regulator: regulator driver interface

This allows regulator drivers to register their regulators and provide
operations to the core. It also has a notifier call chain for propagating
regulator events to clients.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

regulator: consumer device interface

Add support to allow consumer device drivers to control their regulator
power supply.

This uses a similar API to the kernel clock interface in that consumer
drivers can get and put a regulator (like they can with clocks atm) and
get/set voltage, current limit, mode, enable and disable. This should
allow consumers complete control over their supply voltage and current
limit. This also compiles out if not in use so drivers can be reused in
systems with no regulator based power control.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

niu: Fix error checking in niu_ethflow_to_class.

The callers of niu_ethflow_to_class expect zero as error, but it returns
-1 instead.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>