pandora-kernel.git
7 years agoMerge tag 'mfd-for-linus-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Linus Torvalds [Wed, 18 Feb 2015 17:05:48 +0000 (09:05 -0800)]
Merge tag 'mfd-for-linus-3.20' of git://git./linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - fixr platform device collision; da9052, wm8994-core
   - regmap configuration amendments; tps65218
   - fix runtime PM deadlock; rtsx_usb
   - remove unused/superfluous code; db8500-prcmu, omap-usb-host
   - enable watchdog timer; lpc_sch
   - add start/stop RX URBs helpers; dln2
   - remove platform device (DT only); max77686, max77802
   - support suspend and resume; dln2
   - add Device Tree support; da9063
   - extra error checking; intel_soc_pmic
   - const'ify all the things; 88pm860x, hi6421-pmic, intel_soc_pmic,
                               max77686, lm3533, retu, pcf50633,
                               davinci_voicecodec, smsc-ece1099,
                               tps65218, mc13xxx, tps65217, twl-core,
                               twl6040

  New drivers/supported devices:
   - new driver for Richtek RT5033
   - new driver for DA9150 Charger and FuelGauge
   - new driver for Qualcomm Resource Power Manager (RPM)
   - add support for the ir-clk into sun6i-prcm
   - add support for FuelGauge into axp20x"

* tag 'mfd-for-linus-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits)
  mfd: intel_soc_pmic: Add missing error check for devm_kzalloc
  mfd: rtsx_usb: Defer autosuspend while card exists
  mfd: devicetree: Add bindings for DA9063
  mfd: da9063: Add device tree support
  regulator: qcom-rpm: Add missing state flag in call to RPM
  mfd: qcom-rpm: Driver for the Qualcomm RPM
  mfd: devicetree: bindings: Add Qualcomm RPM DT binding
  mfd: max77686/802: Remove support for board files
  mfd: omap-usb-host: Remove some unused functions
  mfd: twl6040: Constify struct regmap_config and reg_default array
  mfd: twl-core: Constify struct regmap_config and reg_default array
  mfd: tps65217: Constify struct regmap_config
  mfd: mc13xxx: i2c/spi: Constify struct regmap_config
  mfd: tps65218: Constify struct regmap_config
  mfd: smsc-ece1099: Constify struct regmap_config
  mfd: davinci_voicecodec: Constify struct regmap_config
  mfd: pcf50633: Constify struct regmap_config
  mfd: retu: Constify struct regmap_config
  mfd: lm3533: Constify struct regmap_config
  mfd: max77686: Constify struct regmap_config
  ...

7 years agoMerge tag 'pwm/for-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry...
Linus Torvalds [Wed, 18 Feb 2015 17:00:53 +0000 (09:00 -0800)]
Merge tag 'pwm/for-3.20-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This contains two new drivers, one for Allwinner SoCs and the other
  for Imagination Technologies' Pistachio SoC.

  Complementing this are a couple of fixes to the Atmel HLCDC PWM and
  STi PWM drivers as well as minor cleanups to the core and the Tegra
  driver"

* tag 'pwm/for-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: tegra: Use NSEC_PER_SEC
  pwm: Remove unnecessary check before of_node_put()
  pwm: Add device tree binding document for IMG PWM DAC
  pwm: Imagination Technologies PWM DAC driver
  pwm: sti: Maintain a bitmap of configured devices
  pwm: sunxi: document OF bindings
  pwm: Add Allwinner SoC support
  pwm: atmel-hlcdc: Prevent division by zero
  pwm: atmel-hlcdc: Depend on HAVE_CLK

7 years agoMerge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Linus Torvalds [Wed, 18 Feb 2015 16:49:20 +0000 (08:49 -0800)]
Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This update brings:

   - the big cleanup up by Maxime for device control and slave
     capabilities.  This makes the API much cleaner.

   - new IMG MDC driver by Andrew

   - new Renesas R-Car Gen2 DMA Controller driver by Laurent along with
     bunch of fixes on rcar drivers

   - odd fixes and updates spread over driver"

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits)
  dmaengine: pl330: add DMA_PAUSE feature
  dmaengine: pl330: improve pl330_tx_status() function
  dmaengine: rcar-dmac: Disable channel 0 when using IOMMU
  dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata
  dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device
  dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR
  dmaengine: rcar-dmac: Fix spinlock issues in interrupt
  dmaenegine: edma: fix sparse warnings
  dmaengine: rcar-dmac: Fix uninitialized variable usage
  dmaengine: shdmac: extend PM methods
  dmaengine: shdmac: use SET_RUNTIME_PM_OPS()
  dmaengine: pl330: fix bug that cause start the same descs in cyclic
  dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers
  dmaengine: at_xdmac: simplify channel configuration stuff
  dmaengine: at_xdmac: introduce save_cc field
  dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel
  ioat: fail self-test if wait_for_completion times out
  dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
  dmaengine: dw: amend description of dma_dev field
  dmatest: move src_off, dst_off, len inside loop
  ...

7 years agoMerge git://www.linux-watchdog.org/linux-watchdog
Linus Torvalds [Wed, 18 Feb 2015 16:42:47 +0000 (08:42 -0800)]
Merge git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:
 "This adds the following new drivers:

   - ImgTec PDC Watchdog Timer Driver,
   - Mediatek SoC integrated watchdog

  Add support for BCM5301X, IT8783, NCT6791 and NCT6792 WDT's

  Add bcm47xx_wdt and da9063 restart handlers and contains overall
  improvements and fixes"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: bcm47xx_wdt.c: allow enabling on BCM5301X arch
  watchdog: jz4740: Add DT support
  dt: watchdog: Add DT binding documentation for jz4740 watchdog timer
  watchdog: dw_wdt: Try to get a 30 second watchdog by default
  watchdog: dw_wdt: pat the watchdog before enabling it
  watchdog: w83627hf_wdt: Add support for NCT6791 and NCT6792
  watchdog: bcm47xx_wdt.c: add restart handler support
  watchdog: gpio_wdt: Add "always_running" feature to GPIO watchdog
  watchdog: da9063: Add restart handler support
  ARM: mediatek: dts: Add bindings for watchdog
  watchdog: Add driver for Mediatek watchdog
  watchdog: Fix omap watchdogs to enable the magic close bit
  watchdog: rt2880_wdt: minor clean up
  watchdog: hpwdt: Fix initialization message in hpwdt.c
  watchdog: it87_wdt: add IT8783 ID
  watchdog: imx2: Constify struct regmap_config and watchdog_ops
  DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation
  watchdog: ImgTec PDC Watchdog Timer Driver

7 years agoMerge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee139...
Linus Torvalds [Wed, 18 Feb 2015 16:22:38 +0000 (08:22 -0800)]
Merge tag 'firewire-updates' of git://git./linux/kernel/git/ieee1394/linux1394

Pull fireware updates from Stefan Richter:
 "IEEE 1394 subsystem updates:

   - Replace made-up, unallocated Vendor and Model values of
     firewire-core's Configuration ROM register root directory by
     properly registered IDs.  (These IDs are visible to peer nodes on
     the bus and locally via sysfs, but they are not involved in
     protocol matching or driver matching, nor are they used in stock
     udev rules)

   - Remove some unneccessary code"

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: core: use correct vendor/model IDs
  firewire: sbp2: remove redundant check for bidi command
  firewire: ohci: Remove unused function

7 years agoMerge tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd
Linus Torvalds [Wed, 18 Feb 2015 16:01:44 +0000 (08:01 -0800)]
Merge tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "NAND:

   - Add new Hisilicon NAND driver for Hip04
   - Add default reboot handler, to ensure all outstanding erase
     transactions complete in time
   - jz4740: convert to use GPIO descriptor API
   - Atmel: add support for sama5d4
   - Change default bitflip threshold to 75% of correction strength
   - Miscellaneous cleanups and bugfixes

  SPI NOR:

   - Freescale QuadSPI:
   - Fix a few probe() and remove() issues
   - Add a MAINTAINERS entry for this driver
   - Tweak transfer size to increase read performance
   - Add suspend/resume support
   - Add Micron quad I/O support
   - ST FSM SPI: miscellaneous fixes

  JFFS2:

   - gracefully handle corrupted 'offset' field found on flash

  Other:

   - bcm47xxpart: add tweaks for a few new devices
   - mtdconcat: set return lengths properly for mtd_write_oob()
   - map_ram: enable use with mtdoops
   - maps: support fallback to ROM/UBI for write-protected NOR flash"

* tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd: (46 commits)
  mtd: hisilicon: && vs & typo
  jffs2: fix handling of corrupted summary length
  mtd: hisilicon: add device tree binding documentation
  mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc
  mtd: avoid registering reboot notifier twice
  mtd: concat: set the return lengths properly
  mtd: kconfig: replace PPC_OF with PPC
  mtd: denali: remove unnecessary stubs
  mtd: nand: remove redundant local variable
  MAINTAINERS: add maintainer entry for FREESCALE QUAD SPI driver
  mtd: fsl-quadspi: improve read performance by increase AHB transfer size
  mtd: fsl-quadspi: Remove unnecessary 'map_failed' label
  mtd: fsl-quadspi: Remove unneeded success/error messages
  mtd: fsl-quadspi: Fix the error paths
  mtd: nand: omap: drop condition with no effect
  mtd: nand: jz4740: Convert to GPIO descriptor API
  mtd: nand: Request strength instead of bytes for soft BCH
  mtd: nand: default bitflip-reporting threshold to 75% of correction strength
  mtd: atmel_nand: introduce a new compatible string for sama5d4 chip
  mtd: atmel_nand: return max bitflips in all sectors in pmecc_correction()
  ...

7 years agopwm: tegra: Use NSEC_PER_SEC
Thierry Reding [Wed, 18 Feb 2015 07:40:29 +0000 (08:40 +0100)]
pwm: tegra: Use NSEC_PER_SEC

Instead of using the literal value for the number of nanoseconds per
second, use the macro instead to increase readability.

Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Wed, 18 Feb 2015 01:41:19 +0000 (17:41 -0800)]
Merge git://git./linux/kernel/git/davem/net

Pull networking updates from David Miller:

 1) Missing netlink attribute validation in nft_lookup, from Patrick
    McHardy.

 2) Restrict ipv6 partial checksum handling to UDP, since that's the
    only case it works for.  From Vlad Yasevich.

 3) Clear out silly device table sentinal macros used by SSB and BCMA
    drivers.  From Joe Perches.

 4) Make sure the remote checksum code never creates a situation where
    the remote checksum is applied yet the tunneling metadata describing
    the remote checksum transformation is still present.  Otherwise an
    external entity might see this and apply the checksum again.  From
    Tom Herbert.

 5) Use msecs_to_jiffies() where applicable, from Nicholas Mc Guire.

 6) Don't explicitly initialize timer struct fields, use setup_timer()
    and mod_timer() instead.  From Vaishali Thakkar.

 7) Don't invoke tg3_halt() without the tp->lock held, from Jun'ichi
    Nomura.

 8) Missing __percpu annotation in ipvlan driver, from Eric Dumazet.

 9) Don't potentially perform skb_get() on shared skbs, also from Eric
    Dumazet.

10) Fix COW'ing of metrics for non-DST_HOST routes in ipv6, from Martin
    KaFai Lau.

11) Fix merge resolution error between the iov_iter changes in vhost and
    some bug fixes that occurred at the same time.  From Jason Wang.

12) If rtnl_configure_link() fails we have to perform a call to
    ->dellink() before unregistering the device.  From WANG Cong.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (39 commits)
  net: dsa: Set valid phy interface type
  rtnetlink: call ->dellink on failure when ->newlink exists
  com20020-pci: add support for eae single card
  vhost_net: fix wrong iter offset when setting number of buffers
  net: spelling fixes
  net/core: Fix warning while make xmldocs caused by dev.c
  net: phy: micrel: disable NAND-tree for KSZ8021, KSZ8031, KSZ8051, KSZ8081
  ipv6: fix ipv6_cow_metrics for non DST_HOST case
  openvswitch: Fix key serialization.
  r8152: restore hw settings
  hso: fix rx parsing logic when skb allocation fails
  tcp: make sure skb is not shared before using skb_get()
  bridge: netfilter: Move sysctl-specific error code inside #ifdef
  ipv6: fix possible deadlock in ip6_fl_purge / ip6_fl_gc
  ipvlan: add a missing __percpu pcpu_stats
  tg3: Hold tp->lock before calling tg3_halt() from tg3_init_one()
  bgmac: fix device initialization on Northstar SoCs (condition typo)
  qlcnic: Delete existing multicast MAC list before adding new
  net/mlx5_core: Fix configuration of log_uar_page_sz
  sunvnet: don't change gso data on clones
  ...

7 years agoMerge tag 'md/3.20-fixes' of git://neil.brown.name/md
Linus Torvalds [Wed, 18 Feb 2015 01:34:21 +0000 (17:34 -0800)]
Merge tag 'md/3.20-fixes' of git://neil.brown.name/md

Pull md bugfixes from Neil Brown:
 "Three bug md fixes for 3.20

  yet-another-livelock in raid5, and a problem with write errors to
  4K-block devices"

* tag 'md/3.20-fixes' of git://neil.brown.name/md:
  md/raid5: Fix livelock when array is both resyncing and degraded.
  md/raid10: round up to bdev_logical_block_size in narrow_write_error.
  md/raid1: round up to bdev_logical_block_size in narrow_write_error

7 years agoMerge tag 'please-pull-fixmcelog' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 18 Feb 2015 01:03:07 +0000 (17:03 -0800)]
Merge tag 'please-pull-fixmcelog' of git://git./linux/kernel/git/ras/ras

Pull mcelog regression fix from Tony Luck:
 "Fix regression - functions on the mce notifier chain should not be
  able to decide that an event should not be logged"

* tag 'please-pull-fixmcelog' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  x86/mce: Fix regression. All error records should report via /dev/mcelog

7 years agoMerge tag 'docs-fix' of git://git.lwn.net/linux-2.6
Linus Torvalds [Wed, 18 Feb 2015 01:02:04 +0000 (17:02 -0800)]
Merge tag 'docs-fix' of git://git.lwn.net/linux-2.6

Pull DocBook build fix from Jonathan Corbet:
 "Fix the DocBook build failure caused by the move of the i2o subsystem
  to the staging tree"

* tag 'docs-fix' of git://git.lwn.net/linux-2.6:
  Fix docs build failure caused by i2o removal

7 years agoMerge branch 'for-3.20' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Wed, 18 Feb 2015 01:00:54 +0000 (17:00 -0800)]
Merge branch 'for-3.20' of git://linux-nfs.org/~bfields/linux

Pull nfsd bugfixes from Bruce Fields:
 "These are fixes for two bugs introduced during the merge window"

* 'for-3.20' of git://linux-nfs.org/~bfields/linux:
  nfsd4: fix v3-less build
  nfsd: fix comparison in fh_fsid_match()

7 years agomd/raid5: Fix livelock when array is both resyncing and degraded.
NeilBrown [Wed, 18 Feb 2015 00:35:14 +0000 (11:35 +1100)]
md/raid5: Fix livelock when array is both resyncing and degraded.

Commit a7854487cd7128a30a7f4f5259de9f67d5efb95f:
  md: When RAID5 is dirty, force reconstruct-write instead of read-modify-write.

Causes an RCW cycle to be forced even when the array is degraded.
A degraded array cannot support RCW as that requires reading all data
blocks, and one may be missing.

Forcing an RCW when it is not possible causes a live-lock and the code
spins, repeatedly deciding to do something that cannot succeed.

So change the condition to only force RCW on non-degraded arrays.

Reported-by: Manibalan P <pmanibalan@amiindia.co.in>
Bisected-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Tested-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: a7854487cd7128a30a7f4f5259de9f67d5efb95f
Cc: stable@vger.kernel.org (v3.7+)
7 years agoMerge branch 'lazytime' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Wed, 18 Feb 2015 00:12:34 +0000 (16:12 -0800)]
Merge branch 'lazytime' of git://git./linux/kernel/git/viro/vfs

Pull lazytime mount option support from Al Viro:
 "Lazytime stuff from tytso"

* 'lazytime' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ext4: add optimization for the lazytime mount option
  vfs: add find_inode_nowait() function
  vfs: add support for a lazytime mount option

7 years agoMerge branch 'iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Tue, 17 Feb 2015 23:48:33 +0000 (15:48 -0800)]
Merge branch 'iov_iter' of git://git./linux/kernel/git/viro/vfs

Pull iov_iter updates from Al Viro:
 "More iov_iter work - missing counterpart of iov_iter_init() for
  bvec-backed ones and vfs_read_iter()/vfs_write_iter() - wrappers for
  sync calls of ->read_iter()/->write_iter()"

* 'iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: add vfs_iter_{read,write} helpers
  new helper: iov_iter_bvec()

7 years agoMerge branch 'getname2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Tue, 17 Feb 2015 23:27:47 +0000 (15:27 -0800)]
Merge branch 'getname2' of git://git./linux/kernel/git/viro/vfs

Pull getname/putname updates from Al Viro:
 "Rework of getname/getname_kernel/etc., mostly from Paul Moore.  Gets
  rid of quite a pile of kludges between namei and audit..."

* 'getname2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  audit: replace getname()/putname() hacks with reference counters
  audit: fix filename matching in __audit_inode() and __audit_inode_child()
  audit: enable filename recording via getname_kernel()
  simpler calling conventions for filename_mountpoint()
  fs: create proper filename objects using getname_kernel()
  fs: rework getname_kernel to handle up to PATH_MAX sized filenames
  cut down the number of do_path_lookup() callers

7 years agoMerge branch 'debugfs_automount' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 17 Feb 2015 23:18:19 +0000 (15:18 -0800)]
Merge branch 'debugfs_automount' of git://git./linux/kernel/git/viro/vfs

Pull debugfs patches from Al Viro:
 "debugfs patches, mostly to make it possible for something like tracefs
  to be transparently automounted on given directory in debugfs.

  New primitive in there is debugfs_create_automount(name, parent, func,
  arg), which creates a directory and makes its ->d_automount() return
  func(arg).  Another missing primitive was debugfs_create_file_size() -
  open-coded in quite a few places.  Dave's patch adds it and converts
  the open-code instances to calling it"

* 'debugfs_automount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  debugfs: Provide a file creation function that also takes an initial size
  new primitive: debugfs_create_automount()
  debugfs: split end_creating() into success and failure cases
  debugfs: take mode-dependent parts of debugfs_get_inode() into callers
  fold debugfs_mknod() into callers
  fold debugfs_create() into caller
  fold debugfs_mkdir() into caller
  debugfs_mknod(): get rid useless arguments
  fold debugfs_link() into caller
  debugfs: kill __create_file()
  debugfs: split the beginning and the end of __create_file() off
  debugfs_{mkdir,create,link}(): get rid of redundant argument

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Tue, 17 Feb 2015 22:56:45 +0000 (14:56 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

Pull misc VFS updates from Al Viro:
 "This cycle a lot of stuff sits on topical branches, so I'll be sending
  more or less one pull request per branch.

  This is the first pile; more to follow in a few.  In this one are
  several misc commits from early in the cycle (before I went for
  separate branches), plus the rework of mntput/dput ordering on umount,
  switching to use of fs_pin instead of convoluted games in
  namespace_unlock()"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  switch the IO-triggering parts of umount to fs_pin
  new fs_pin killing logics
  allow attaching fs_pin to a group not associated with some superblock
  get rid of the second argument of acct_kill()
  take count and rcu_head out of fs_pin
  dcache: let the dentry count go down to zero without taking d_lock
  pull bumping refcount into ->kill()
  kill pin_put()
  mode_t whack-a-mole: chelsio
  file->f_path.dentry is pinned down for as long as the file is open...
  get rid of lustre_dump_dentry()
  gut proc_register() a bit
  kill d_validate()
  ncpfs: get rid of d_validate() nonsense
  selinuxfs: don't open-code d_genocide()

7 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Tue, 17 Feb 2015 22:35:02 +0000 (14:35 -0800)]
Merge branch 'akpm' (patches from Andrew)

Merge yet more updates from Andrew Morton:

 - a pile of minor fs fixes and cleanups

 - kexec updates

 - random misc fixes in various places: vmcore, rbtree, eventfd, ipc, seccomp.

 - a series of python-based kgdb helper scripts

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits)
  seccomp: cap SECCOMP_RET_ERRNO data to MAX_ERRNO
  samples/seccomp: improve label helper
  ipc,sem: use current->state helpers
  scripts/gdb: disable pagination while printing from breakpoint handler
  scripts/gdb: define maintainer
  scripts/gdb: convert CpuList to generator function
  scripts/gdb: convert ModuleList to generator function
  scripts/gdb: use a generator instead of iterator for task list
  scripts/gdb: ignore byte-compiled python files
  scripts/gdb: port to python3 / gdb7.7
  scripts/gdb: add basic documentation
  scripts/gdb: add lx-lsmod command
  scripts/gdb: add class to iterate over CPU masks
  scripts/gdb: add lx_current convenience function
  scripts/gdb: add internal helper and convenience function for per-cpu lookup
  scripts/gdb: add get_gdbserver_type helper
  scripts/gdb: add internal helper and convenience function to retrieve thread_info
  scripts/gdb: add is_target_arch helper
  scripts/gdb: add helper and convenience function to look up tasks
  scripts/gdb: add task iteration class
  ...

7 years agoseccomp: cap SECCOMP_RET_ERRNO data to MAX_ERRNO
Kees Cook [Tue, 17 Feb 2015 21:48:00 +0000 (13:48 -0800)]
seccomp: cap SECCOMP_RET_ERRNO data to MAX_ERRNO

The value resulting from the SECCOMP_RET_DATA mask could exceed MAX_ERRNO
when setting errno during a SECCOMP_RET_ERRNO filter action.  This makes
sure we have a reliable value being set, so that an invalid errno will not
be ignored by userspace.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Dmitry V. Levin <ldv@altlinux.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agosamples/seccomp: improve label helper
Kees Cook [Tue, 17 Feb 2015 21:47:58 +0000 (13:47 -0800)]
samples/seccomp: improve label helper

Fixes a potential corruption with uninitialized stack memory in the
seccomp BPF sample program.

[akpm@linux-foundation.org: coding-style fixlet]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Robert Swiecki <swiecki@google.com>
Tested-by: Robert Swiecki <swiecki@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoipc,sem: use current->state helpers
Davidlohr Bueso [Tue, 17 Feb 2015 21:47:55 +0000 (13:47 -0800)]
ipc,sem: use current->state helpers

Call __set_current_state() instead of assigning the new state directly.
These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP environments, keeping
track of who changed the state.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: disable pagination while printing from breakpoint handler
Jan Kiszka [Tue, 17 Feb 2015 21:47:52 +0000 (13:47 -0800)]
scripts/gdb: disable pagination while printing from breakpoint handler

While reporting the (refreshed) list of modules on automatic updates we
may hit the page boundary of the output console and cause a stop if
pagination is enabled.  However, gdb does not accept user input while
running over the breakpoint handler.  So we get stuck, and the user is
forced to interrupt gdb.

Resolve this by disabling pagination during automatic symbol updates.  We
restore the user's configuration once done.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: define maintainer
Jan Kiszka [Tue, 17 Feb 2015 21:47:49 +0000 (13:47 -0800)]
scripts/gdb: define maintainer

I'm proposing myself for keeping an eye on these scripts and integrating
contributions.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: convert CpuList to generator function
Jan Kiszka [Tue, 17 Feb 2015 21:47:47 +0000 (13:47 -0800)]
scripts/gdb: convert CpuList to generator function

Yet another code simplification.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: convert ModuleList to generator function
Jan Kiszka [Tue, 17 Feb 2015 21:47:44 +0000 (13:47 -0800)]
scripts/gdb: convert ModuleList to generator function

Analogously to the task list, convert the module list to a generator
function.  It noticeably simplifies the code.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: use a generator instead of iterator for task list
Daniel Wagner [Tue, 17 Feb 2015 21:47:41 +0000 (13:47 -0800)]
scripts/gdb: use a generator instead of iterator for task list

The iterator does not return any task_struct from the thread_group list
because the first condition in the 'if not t or ...' will only be the
first time None.

Instead of keeping track of the state ourself in the next() function, we
fall back using Python's generator.

Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: ignore byte-compiled python files
Daniel Thompson [Tue, 17 Feb 2015 21:47:38 +0000 (13:47 -0800)]
scripts/gdb: ignore byte-compiled python files

Using the gdb scripts leaves byte-compiled python files in the scripts/
directory.  These should be ignored by git.

[jan.kiszka@siemens.com: drop redundant mrproper rule as suggested by Michal]
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: port to python3 / gdb7.7
Pantelis Koukousoulas [Tue, 17 Feb 2015 21:47:35 +0000 (13:47 -0800)]
scripts/gdb: port to python3 / gdb7.7

I tried to use these scripts in an ubuntu 14.04 host (gdb 7.7 compiled
against python 3.3) but there were several errors.

I believe this patch fixes these issues so that the commands now work (I
tested lx-symbols, lx-dmesg, lx-lsmod).

Main issues that needed to be resolved:

  * In python 2 iterators have a "next()" method. In python 3 it is
    __next__() instead (so let's just add both).

  * In older python versions there was an implicit conversion
    in object.__format__() (used when an object is in string.format())
    where it was converting the object to str first and then
    calling str's __format__(). This has now been removed so
    we must explicitly convert to str the objects for which
    we need to keep this behavior.

  * In dmesg.py: in python 3 log_buf is now a "memoryview" object
    which needs to be converted to a string in order to use string
    methods like "splitlines()". Luckily memoryview exists in
    python 2.7.6 as well, so we can convert log_buf to memoryview
    and use the same code in both python 2 and python 3.

This version of the patch has now been tested with gdb 7.7 and both python
3.4 and python 2.7.6 (I think asking for at least python 2.7.6 is a
reasonable requirement instead of complicating the code with version
checks etc).

Signed-off-by: Pantelis Koukousoulas <pktoss@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add basic documentation
Jan Kiszka [Tue, 17 Feb 2015 21:47:32 +0000 (13:47 -0800)]
scripts/gdb: add basic documentation

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Rob Landley <rob@landley.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add lx-lsmod command
Jan Kiszka [Tue, 17 Feb 2015 21:47:29 +0000 (13:47 -0800)]
scripts/gdb: add lx-lsmod command

This adds a lsmod-like command to list all currently loaded modules of the
target.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add class to iterate over CPU masks
Jan Kiszka [Tue, 17 Feb 2015 21:47:27 +0000 (13:47 -0800)]
scripts/gdb: add class to iterate over CPU masks

Will be used first to count module references.  It is optimized to read
the mask only once per stop.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add lx_current convenience function
Jan Kiszka [Tue, 17 Feb 2015 21:47:24 +0000 (13:47 -0800)]
scripts/gdb: add lx_current convenience function

This is a shorthand for *$lx_per_cpu("current_task"), i.e.  a convenience
function to retrieve the currently running task of the active context.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add internal helper and convenience function for per-cpu lookup
Jan Kiszka [Tue, 17 Feb 2015 21:47:21 +0000 (13:47 -0800)]
scripts/gdb: add internal helper and convenience function for per-cpu lookup

This function allows to obtain a per-cpu variable, either of the current
or an explicitly specified CPU.

Note: sparc64 version is untested.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add get_gdbserver_type helper
Jan Kiszka [Tue, 17 Feb 2015 21:47:18 +0000 (13:47 -0800)]
scripts/gdb: add get_gdbserver_type helper

This helper probes the type of the gdb server.  Supported are QEMU and
KGDB so far.  Knowledge about the gdb server is required e.g.  to
retrieve the current CPU or current task.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add internal helper and convenience function to retrieve thread_info
Jan Kiszka [Tue, 17 Feb 2015 21:47:15 +0000 (13:47 -0800)]
scripts/gdb: add internal helper and convenience function to retrieve thread_info

Add the internal helper get_thread_info that calculates the thread_info
from a given task variable.  Also export this service as a convenience
function.

Note: ia64 version is untested.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add is_target_arch helper
Jan Kiszka [Tue, 17 Feb 2015 21:47:12 +0000 (13:47 -0800)]
scripts/gdb: add is_target_arch helper

This helper caches to result of "show architecture" and matches the
provided arch (sub-)string against that output.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add helper and convenience function to look up tasks
Jan Kiszka [Tue, 17 Feb 2015 21:47:10 +0000 (13:47 -0800)]
scripts/gdb: add helper and convenience function to look up tasks

Add the helper task_by_pid that can look up a task by its PID.  Also
export it as a convenience function.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add task iteration class
Jan Kiszka [Tue, 17 Feb 2015 21:47:07 +0000 (13:47 -0800)]
scripts/gdb: add task iteration class

This class allows to iterate over all tasks of the target.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add lx-dmesg command
Jan Kiszka [Tue, 17 Feb 2015 21:47:04 +0000 (13:47 -0800)]
scripts/gdb: add lx-dmesg command

This pokes into the log buffer of the debugged kernel, dumping it to the
gdb console.  Helping in case the target should or can no longer execute
dmesg itself.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add read_u16/32/64 helpers
Jan Kiszka [Tue, 17 Feb 2015 21:47:01 +0000 (13:47 -0800)]
scripts/gdb: add read_u16/32/64 helpers

Add helpers for reading integers from target memory buffers.  Required
when caching the memory access is more efficient than reading individual
values via gdb.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add get_target_endianness helper
Jan Kiszka [Tue, 17 Feb 2015 21:46:58 +0000 (13:46 -0800)]
scripts/gdb: add get_target_endianness helper

Parse the target endianness from the output of "show endian" and cache the
result to return it via the new helper get_target_endiannes.  We will need
it for reading integers from buffers that contain target memory.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add internal helper and convenience function to look up a module
Jan Kiszka [Tue, 17 Feb 2015 21:46:55 +0000 (13:46 -0800)]
scripts/gdb: add internal helper and convenience function to look up a module

Add the internal helper get_module_by_name to obtain the module structure
corresponding to the given name.  Also export this service as a
convenience function.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add automatic symbol reloading on module insertion
Jan Kiszka [Tue, 17 Feb 2015 21:46:52 +0000 (13:46 -0800)]
scripts/gdb: add automatic symbol reloading on module insertion

This installs a silent breakpoint on the do_init_module function.  The
breakpoint handler will try to load symbols from the module files found
during lx-symbols execution.  This way, breakpoints can be set to module
initialization functions, and there is no need to explicitly call
lx-symbols after (re-)loading a module.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agokernel/module.c: do not inline do_init_module()
Jan Kiszka [Tue, 17 Feb 2015 21:46:50 +0000 (13:46 -0800)]
kernel/module.c: do not inline do_init_module()

This provides a reliable breakpoint target, required for automatic symbol
loading via the gdb helper command 'lx-symbols'.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add lx-symbols command
Jan Kiszka [Tue, 17 Feb 2015 21:46:47 +0000 (13:46 -0800)]
scripts/gdb: add lx-symbols command

This is probably the most useful helper when debugging kernel modules:
lx-symbols first reloads vmlinux.  Then it searches recursively for *.ko
files in the specified paths and the current directory.  Finally it walks
the kernel's module list, issuing the necessary add-symbol-file command
for each loaded module so that gdb knows which module symbol corresponds
to which address.  It also looks up variable sections (bss, data, rodata)
and appends their address to the add-symbole-file command line.  This
allows to access global module variables just like any other variable.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add module iteration class
Jan Kiszka [Tue, 17 Feb 2015 21:46:44 +0000 (13:46 -0800)]
scripts/gdb: add module iteration class

Will soon be used for loading symbols, printing global variables or
listing modules.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add container_of helper and convenience function
Jan Kiszka [Tue, 17 Feb 2015 21:46:41 +0000 (13:46 -0800)]
scripts/gdb: add container_of helper and convenience function

Provide an internal helper with container_of semantics.  As type lookups
are very slow in gdb-python and we need a type "long" for this, cache the
reference to this type object.  Then export the helper also as a
convenience function form use at the gdb command line.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add cache for type objects
Jan Kiszka [Tue, 17 Feb 2015 21:46:38 +0000 (13:46 -0800)]
scripts/gdb: add cache for type objects

Type lookups are very slow in gdb-python which is often noticeable when
iterating over a number of objects.  Introduce the helper class CachedType
that keeps a reference to a gdb.Type object but also refreshes it after an
object file has been loaded.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscripts/gdb: add infrastructure
Jan Kiszka [Tue, 17 Feb 2015 21:46:36 +0000 (13:46 -0800)]
scripts/gdb: add infrastructure

This provides the basic infrastructure to load kernel-specific python
helper scripts when debugging the kernel in gdb.

The loading mechanism is based on gdb loading for <objfile>-gdb.py when
opening <objfile>.  Therefore, this places a corresponding link to the
main helper script into the output directory that contains vmlinux.

The main scripts will pull in submodules containing Linux specific gdb
commands and functions.  To avoid polluting the source directory with
compiled python modules, we link to them from the object directory.

Due to gdb.parse_and_eval and string redirection for gdb.execute, we
depend on gdb >= 7.2.

This feature is enabled via CONFIG_GDB_SCRIPTS.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Michal Marek <mmarek@suse.cz> [kbuild stuff]
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agofs/affs/super.c: fix switch indentation
Fabian Frederick [Tue, 17 Feb 2015 21:46:33 +0000 (13:46 -0800)]
fs/affs/super.c: fix switch indentation

Fix checkpatch error:

  ERROR: switch and case should be at the same indent

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agofs/affs/inode.c: remove double extern affs_symlink_inode_operations
Fabian Frederick [Tue, 17 Feb 2015 21:46:30 +0000 (13:46 -0800)]
fs/affs/inode.c: remove double extern affs_symlink_inode_operations

affs_symlink_inode_operations was already declared extern in affs.h

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agofs/affs/bitmap.c: remove unnecessary return
Fabian Frederick [Tue, 17 Feb 2015 21:46:28 +0000 (13:46 -0800)]
fs/affs/bitmap.c: remove unnecessary return

return is not needed at the end of function.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agofs/affs/amigaffs.c: remove else after return
Fabian Frederick [Tue, 17 Feb 2015 21:46:25 +0000 (13:46 -0800)]
fs/affs/amigaffs.c: remove else after return

else is unnecessary after return -ENAMETOOLONG

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agofs/affs: define AFFSNAMEMAX to replace constant use
Fabian Frederick [Tue, 17 Feb 2015 21:46:23 +0000 (13:46 -0800)]
fs/affs: define AFFSNAMEMAX to replace constant use

30 was used all over the place to compare name length against
AFFS maximum name length.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agofs/affs: use unsigned int for string lengths
Fabian Frederick [Tue, 17 Feb 2015 21:46:20 +0000 (13:46 -0800)]
fs/affs: use unsigned int for string lengths

- Some min() were used with different types.

- Create a new variable in __affs_hash_dentry() to process
  affs_check_name()/min() return

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agofs/affs/super.c: destroy sbi mutex in affs_kill_sb()
Fabian Frederick [Tue, 17 Feb 2015 21:46:17 +0000 (13:46 -0800)]
fs/affs/super.c: destroy sbi mutex in affs_kill_sb()

Call mutex_destroy() on superblock mutex in affs_kill_sb() otherwise mutex
debugging code isn't able to detect that mutex is used after being freed.
(thanks to Jan Kara for complete definition).

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agofs/affs/file.c: fix direct IO writes beyond EOF
Fabian Frederick [Tue, 17 Feb 2015 21:46:15 +0000 (13:46 -0800)]
fs/affs/file.c: fix direct IO writes beyond EOF

Use the same fallback to normal IO in case of write
operations beyond EOF as fat direct IO. This patch fixes

fsx file -d -Z -r 4096 -w 4096

Report:
  129(129 mod 256): TRUNCATE DOWN from 0x3ff01 to 0xb3f6
  130(130 mod 256): WRITE    0x22000 thru 0x2dfff (0xc000 bytes) HOLE

Thanks to Jan for helping me on this problem.

The ideal solution suggested by Jan Kara would be to use
cont_write_begin() but affs direct_IO shouldn't be used a lot anyway...

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agofs/affs/file.c: replace if/BUG by BUG_ON
Fabian Frederick [Tue, 17 Feb 2015 21:46:12 +0000 (13:46 -0800)]
fs/affs/file.c: replace if/BUG by BUG_ON

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agofs/affs: fix casting in printed messages
Geert Uytterhoeven [Tue, 17 Feb 2015 21:46:10 +0000 (13:46 -0800)]
fs/affs: fix casting in printed messages

  - "inode.i_ino" is "unsigned long",
  - "loff_t" is always "unsigned long long",
  - "sector_t" should be cast to "unsigned long long" for printing,
  - "u32" should not be cast to "unsigned int" for printing.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoeventfd: don't take the spinlock in eventfd_poll
Chris Mason [Tue, 17 Feb 2015 21:46:07 +0000 (13:46 -0800)]
eventfd: don't take the spinlock in eventfd_poll

The spinlock in eventfd_poll is trying to protect the count of events so
it can decide if it should return POLLIN, POLLERR, or POLLOUT.  But,
because of the way we drop the lock after calling poll_wait, and drop it
again before returning, we have the same pile of races with the lock as
we do with a single read of ctx->count().

This replaces the lock with a read barrier and single read.

eventfd_write does a single bump of ctx->count, so this should not add
new races with adding events.  eventfd_read is similar, it will do a
single decrement with the lock held, and so we're making the race with
concurrent readers slightly larger.

This spinlock is the top CPU user in kernel code during one of our
workloads.  Removing it gives us a ~2% boost.

[arnd@arndb.de: avoid unused variable warning]
[dan.carpenter@oracle.com: type bug in eventfd_poll()]
Signed-off-by: Chris Mason <clm@fb.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agolib/rbtree.c: fix typo in comment
John de la Garza [Tue, 17 Feb 2015 21:46:04 +0000 (13:46 -0800)]
lib/rbtree.c: fix typo in comment

Signed-off-by: John de la Garza <john@jjdev.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agovmcore: fix PT_NOTE n_namesz, n_descsz overflow issue
WANG Chao [Tue, 17 Feb 2015 21:46:01 +0000 (13:46 -0800)]
vmcore: fix PT_NOTE n_namesz, n_descsz overflow issue

When updating PT_NOTE header size (ie.  p_memsz), an overflow issue
happens with the following bogus note entry:

  n_namesz = 0xFFFFFFFF
  n_descsz = 0x0
  n_type   = 0x0

This kind of note entry should be dropped during updating p_memsz.  But
because n_namesz is 32bit, after (n_namesz + 3) & (~3), it's overflow to
0x0, the note entry size looks sane and reserved.

When userspace (eg.  crash utility) is trying to access such bogus note,
it could lead to an unexpected behavior (eg.  crash utility segment fault
because it's reading bogus address).

The source of bogus note hasn't been identified yet.  At least we could
drop the bogus note so user space wouldn't be surprised.

Signed-off-by: WANG Chao <chaowang@redhat.com>
Cc: Dave Anderson <anderson@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Randy Wright <rwright@hp.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Rashika Kheria <rashika.kheria@gmail.com>
Cc: Greg Pearson <greg.pearson@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agokexec: add IND_FLAGS macro
Geoff Levand [Tue, 17 Feb 2015 21:45:58 +0000 (13:45 -0800)]
kexec: add IND_FLAGS macro

Add a new kexec preprocessor macro IND_FLAGS, which is the bitwise OR of
all the possible kexec IND_ kimage_entry indirection flags.  Having this
macro allows for simplified code in the prosessing of the kexec
kimage_entry items.  Also, remove the local powerpc definition and use the
generic one.

Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Maximilian Attems <max@stro.at>
Cc: Michal Marek <mmarek@suse.cz>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agokexec: add bit definitions for kimage entry flags
Geoff Levand [Tue, 17 Feb 2015 21:45:56 +0000 (13:45 -0800)]
kexec: add bit definitions for kimage entry flags

Define new kexec preprocessor macros IND_*_BIT that define the bit
position of the kimage entry flags.  Change the existing IND_* flag macros
to be defined as bit shifts of the corresponding IND_*_BIT macros.  Also
wrap all C language code in kexec.h with #if !defined(__ASSEMBLY__) so
assembly files can include kexec.h to get the IND_* and IND_*_BIT macros.

Some CPU instruction sets have tests for bit position which are convenient
in implementing routines that operate on the kimage entry list.  The
addition of these bit position macros in a common location will avoid
duplicate definitions and the chance that changes to the IND_* flags will
not be propagated to assembly files.

Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Maximilian Attems <max@stro.at>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agokexec: simplify conditional
Geoff Levand [Tue, 17 Feb 2015 21:45:53 +0000 (13:45 -0800)]
kexec: simplify conditional

Simplify the code around one of the conditionals in the kexec_load syscall
routine.

The original code was confusing with a redundant check on KEXEC_ON_CRASH
and comments outside of the conditional block.  This change switches the
order of the conditional check, and cleans up the comments for the
conditional.  There is no functional change to the code.

Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Maximilian Attems <max@stro.at>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agokexec: Fix make headers_check
Geoff Levand [Tue, 17 Feb 2015 21:45:50 +0000 (13:45 -0800)]
kexec: Fix make headers_check

Remove the unneded declaration for a kexec_load() routine.

Fixes errors like these when running 'make headers_check':

include/uapi/linux/kexec.h: userspace cannot reference function or variable defined in the kernel

Paul said:

: The kexec_load declaration isn't very useful for userspace, see the patch
: I submitted in http://lkml.kernel.org/r/1389791824.17407.9.camel@x220 .
: And After my attempt the export of that declaration has also been
: discussed in
: http://lkml.kernel.org/r/115373b6ac68ee7a305975896e1c4971e8e51d4c.1408731991.git.geoff@infradead.org
:
: In that last discussion no one has been able to point to an actual user of
: it.  So, as far as I can tell, no one actually uses it.  Which makes
: sense, because including this header by itself doesn't give one access to
: a useful definition of kexec_load.  So why bother with the declaration?

Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Paul Bolle <pebolle@tiscali.nl>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Maximilian Attems <max@stro.at>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agokexec: fix a typo in comment
Alexander Kuleshov [Tue, 17 Feb 2015 21:45:47 +0000 (13:45 -0800)]
kexec: fix a typo in comment

Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agokexec: remove never used member destination in kimage
Baoquan He [Tue, 17 Feb 2015 21:45:44 +0000 (13:45 -0800)]
kexec: remove never used member destination in kimage

struct kimage has a member destination which is used to store the real
destination address of each page when load segment from user space buffer
to kernel.  But we never retrieve the value stored in kimage->destination,
so this member variable in kimage and its assignment operation are
redundent code.

I guess for_each_kimage_entry just does the work that kimage->destination
is expected to do.

So in this patch just make a cleanup to remove it.

Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agosignal: use current->state helpers
Davidlohr Bueso [Tue, 17 Feb 2015 21:45:41 +0000 (13:45 -0800)]
signal: use current->state helpers

Call __set_current_state() instead of assigning the new state directly.
These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP environments, keeping
track of who changed the state.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoptrace: remove linux/compat.h inclusion under CONFIG_COMPAT
Fabian Frederick [Tue, 17 Feb 2015 21:45:39 +0000 (13:45 -0800)]
ptrace: remove linux/compat.h inclusion under CONFIG_COMPAT

Commit 84c751bd4aeb ("ptrace: add ability to retrieve signals without
removing from a queue (v4)") includes <linux/compat.h> globally in
ptrace.c

This patch removes inclusion under if defined CONFIG_COMPAT.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agofs: fat: use MSDOS_SB macro to get msdos_sb_info
Fred Chou [Tue, 17 Feb 2015 21:45:36 +0000 (13:45 -0800)]
fs: fat: use MSDOS_SB macro to get msdos_sb_info

Use the MSDOS_SB macro to get msdos_sb_info, instead of coding it
directly.

Signed-off-by: Fred Chou <fred.chou.nd@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agofs/reiserfs/inode.c: replace 0 by NULL for pointers
Fabian Frederick [Tue, 17 Feb 2015 21:45:33 +0000 (13:45 -0800)]
fs/reiserfs/inode.c: replace 0 by NULL for pointers

Fix sparse warning:

  fs/reiserfs/inode.c:2769:19: warning: Using plain integer as NULL pointer

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agofs/ufs/super.c: fix potential race condition
Fabian Frederick [Tue, 17 Feb 2015 21:45:31 +0000 (13:45 -0800)]
fs/ufs/super.c: fix potential race condition

Let locking subsystem decide on mutex management.  As reported by Andrew
Morton this patch fixes a bug:

: lock_ufs() is assuming that on non-preempt uniprocessor, the calling
: code will run atomically up to the matching unlock_ufs().
:
: But that isn't true. The very first site I looked at (ufs_frag_map)
: does sb_bread() under lock_ufs().  And sb_bread() will call schedule(),
: very commonly.
:
: The ->mutex_owner stuff is a bit hacky but should work OK.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agofs/ufs/super.c: remove unnecessary casting
Fabian Frederick [Tue, 17 Feb 2015 21:45:28 +0000 (13:45 -0800)]
fs/ufs/super.c: remove unnecessary casting

Fix the following coccinelle warning:

  fs/ufs/super.c:1418:7-28: WARNING: casting value returned by memory allocation function to (struct ufs_inode_info *) is useless.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agofs/coda/dir.c: forward declaration clean-up
Fabian Frederick [Tue, 17 Feb 2015 21:45:25 +0000 (13:45 -0800)]
fs/coda/dir.c: forward declaration clean-up

- Move operation structures to avoid forward declarations.

- Fix some checkpatch warnings:

WARNING: Missing a blank line after declarations
+ struct inode *host_inode = file_inode(host_file);
+ mutex_lock(&host_inode->i_mutex);

ERROR: that open brace { should be on the previous line
+const struct dentry_operations coda_dentry_operations =
+{

ERROR: that open brace { should be on the previous line
+const struct inode_operations coda_dir_inode_operations =
+{

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agofs/befs/linuxvfs.c: remove unnecessary casting
Fabian Frederick [Tue, 17 Feb 2015 21:45:23 +0000 (13:45 -0800)]
fs/befs/linuxvfs.c: remove unnecessary casting

Fix the following coccinelle warning:

  fs/befs/linuxvfs.c:278:14-36: WARNING: casting value returned by memory allocation function to (struct befs_inode_info *) is useless.

[akpm@linux-foundation.org: avoid 80-col ugliness]
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoMerge branch 'parisc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller...
Linus Torvalds [Tue, 17 Feb 2015 22:25:58 +0000 (14:25 -0800)]
Merge branch 'parisc-3.20-1' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc update from Helge Deller:
 "The major change in here is the removal of the old HP-UX compat code
  which should have made it possible to load and execute 32-bit HP-UX
  binaries on PA-RISC Linux.  Since it was never functional and since
  nobody cares about old 32-bit HPUX binaries any longer, it's now time
  to free up 3200 lines of kernel code (CONFIG_HPUX and
  CONFIG_BINFMT_SOM).

  Other than that we wire up the execveat() syscall, fix sparse errors
  and have some whitespace cleanups"

* 'parisc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  fs/binfmt_som: Drop kernel support for HP-UX SOM binaries
  parisc: Remove unused function
  parisc: macro whitespace fixes
  parisc/uaccess: fix sparse errors
  parisc: hpux - Remove HPUX syscall numbers
  parisc: hpux - Remove hpux gateway page
  parisc: hpux - Delete files in hpux subdirectory
  parisc: hpux - Do not compile hpux subdirectory
  parisc: hpux - Drop support for HP-UX binaries
  parisc: Add error checks when building up signal trampoline handler
  parisc: Wire up execveat syscall

7 years agoMerge tag 'nios2-v3.20-rc1' of git://git.rocketboards.org/linux-socfpga-next
Linus Torvalds [Tue, 17 Feb 2015 22:23:42 +0000 (14:23 -0800)]
Merge tag 'nios2-v3.20-rc1' of git://git.rocketboards.org/linux-socfpga-next

Pull arch/nios2 update from Ley Foon Tan:
 "Here is the nios2 update for 3.20:

   - add early printk support
   - add kgdb support
   - add compressed kernel support
   - bugfixes"

* tag 'nios2-v3.20-rc1' of git://git.rocketboards.org/linux-socfpga-next:
  nios2: add kgdb support
  MAINTAINERS: update arch/nios2 git tree
  nios2: default CONFIG_NIOS2_BOOT_LINK_OFFSET to 8MB
  nios2: Add support for compressed kernel
  nios2: add early printk support
  nios2: Port OOM changes to do_page_fault()
  nios2: Remove unused prepare_to_copy()

7 years agoMerge tag 'suspend-to-idle-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 17 Feb 2015 22:17:51 +0000 (14:17 -0800)]
Merge tag 'suspend-to-idle-3.20-rc1' of git://git./linux/kernel/git/rafael/linux-pm

Pull suspend-to-idle updates from Rafael Wysocki:
 "Suspend-to-idle timer quiescing support for v3.20-rc1

  Until now suspend-to-idle has not been able to save much more energy
  than runtime PM because of timer interrupts that periodically bring
  CPUs out of idle while they are waiting for a wakeup interrupt.  Of
  course, the timer interrupts are not wakeup ones, so the handling of
  them can be deferred until a real wakeup interrupt happens, but at the
  same time we don't want to mass-expire timers at that point.

  The solution is to suspend the entire timekeeping when the last CPU is
  entering an idle state and resume it when the first CPU goes out of
  idle.  That has to be done with care, though, so as to avoid accessing
  suspended clocksources etc.  end we need extra support from idle
  drivers for that.

  This series of commits adds support for quiescing timers during
  suspend-to-idle and adds the requisite callbacks to intel_idle and the
  ACPI cpuidle driver"

* tag 'suspend-to-idle-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / idle: Implement ->enter_freeze callback routine
  intel_idle: Add ->enter_freeze callbacks
  PM / sleep: Make it possible to quiesce timers during suspend-to-idle
  timekeeping: Make it safe to use the fast timekeeper while suspended
  timekeeping: Pass readout base to update_fast_timekeeper()
  PM / sleep: Re-implement suspend-to-idle handling

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Tue, 17 Feb 2015 21:20:42 +0000 (13:20 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security

Pull security subsystem fixes from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  Don't leak a key reference if request_key() tries to use a revoked keyring
  Added Little Endian support to vtpm module
  tpm, tpm_tis: fix TPM 2.0 probing
  tpm: fix suspend/resume paths for TPM 2.0
  Smack: secmark connections

7 years agowatchdog: bcm47xx_wdt.c: allow enabling on BCM5301X arch
Rafał Miłecki [Sat, 7 Feb 2015 17:04:10 +0000 (18:04 +0100)]
watchdog: bcm47xx_wdt.c: allow enabling on BCM5301X arch

BCM5301X (ARCH_BCM_5301X) is a new Broadcom architecture using the same
SoC bus driver (bcma) as BCM47XX but based on ARM instead of MIPS.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agowatchdog: jz4740: Add DT support
Zubair Lutfullah Kakakhel [Tue, 3 Feb 2015 10:25:48 +0000 (10:25 +0000)]
watchdog: jz4740: Add DT support

Add DT support to the jz4740 driver. Simple of_match_ptr. No other
modification for probe needed

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agodt: watchdog: Add DT binding documentation for jz4740 watchdog timer
Zubair Lutfullah Kakakhel [Tue, 3 Feb 2015 10:25:47 +0000 (10:25 +0000)]
dt: watchdog: Add DT binding documentation for jz4740 watchdog timer

Add binding for jz4740 watchdog timer. It is a simple watchdog timer.

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agowatchdog: dw_wdt: Try to get a 30 second watchdog by default
Doug Anderson [Tue, 27 Jan 2015 22:25:17 +0000 (14:25 -0800)]
watchdog: dw_wdt: Try to get a 30 second watchdog by default

The dw_wdt_set_top() function takes in a value in seconds.  In
dw_wdt_open() we were calling it with a value that's supposed to
represent the maximum value programmed into the "top" register with a
comment saying that we were trying to set the watchdog to its maximum
value.  Instead we ended up setting the watchdog to ~15 seconds.

Let's fix this.  However, setting things to the "max" gives me an 86
second watchdog in the system I'm looking at.  86 seconds feels a
little too long.  We'll explicitly choose 30 seconds as a more
reasonable value.

NOTE: Ideally this driver should be transitioned to be a real watchdog
driver.  Then we could use "watchdog_init_timeout" and let the timeout
be specified in a number of ways (device tree, module parameter, etc).
This patch should be considered a bit of a stopgap solution.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agowatchdog: dw_wdt: pat the watchdog before enabling it
Doug Anderson [Tue, 27 Jan 2015 22:25:16 +0000 (14:25 -0800)]
watchdog: dw_wdt: pat the watchdog before enabling it

On some dw_wdt implementations the "top" register may be initted to 0
at bootup.  In such a case, each "pat" of the watchdog will reset the
timer to 0xffff.  That's pretty short.

The input clock of the wdt can be any of a wide range of values.  On
an rk3288 system, I've seen the wdt clock be 24.75 MHz.  That means
each tick is ~40ns and we'll count to 0xffff in ~2.6ms.

Because of the above two facts, it's a really good idea to pat the
watchdog after initting the "top" register properly and before
enabling the watchdog.  If you don't then there's no way we'll get the
next heartbeat in time.

Jisheng Zhang fixed this problem on some dw_wdt versions by using the
TOP_INIT feature.  However, the dw_wdt on rk3288 doesn't have TOP_INIT
so it's a good idea to also pat the watchdog manually.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agowatchdog: w83627hf_wdt: Add support for NCT6791 and NCT6792
Guenter Roeck [Mon, 26 Jan 2015 16:53:56 +0000 (08:53 -0800)]
watchdog: w83627hf_wdt: Add support for NCT6791 and NCT6792

The watchdog functionality in both chips is almost identical to NCT6779.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agowatchdog: bcm47xx_wdt.c: add restart handler support
Rafał Miłecki [Sun, 25 Jan 2015 10:40:57 +0000 (11:40 +0100)]
watchdog: bcm47xx_wdt.c: add restart handler support

Just like in case of other watchdog drivers, use the new kernel core
API to provide restart support.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agowatchdog: gpio_wdt: Add "always_running" feature to GPIO watchdog
Mike Looijmans [Wed, 14 Jan 2015 06:28:29 +0000 (07:28 +0100)]
watchdog: gpio_wdt: Add "always_running" feature to GPIO watchdog

On some chips, like the TPS386000, the trigger cannot be disabled
and the CPU must keep toggling the line at all times. Add a switch
"always_running" to keep toggling the GPIO line regardless of the
state of the soft part of the watchdog. The "armed" member keeps
track of whether a timeout must also cause a reset.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agowatchdog: da9063: Add restart handler support
Geert Uytterhoeven [Thu, 29 Jan 2015 14:26:05 +0000 (15:26 +0100)]
watchdog: da9063: Add restart handler support

Register a restart handler for the da9063 watchdog.  System restart is
triggered by sending the shutdown command to the PMIC.
As more-suitable restart handlers may exist, the priority of the
watchdog restart handler is set to 128.

The actual restart method was inspired by a platform-specific patch from
the BSP by Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agoARM: mediatek: dts: Add bindings for watchdog
Matthias Brugger [Tue, 13 Jan 2015 12:28:56 +0000 (13:28 +0100)]
ARM: mediatek: dts: Add bindings for watchdog

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agowatchdog: Add driver for Mediatek watchdog
Matthias Brugger [Tue, 13 Jan 2015 12:28:55 +0000 (13:28 +0100)]
watchdog: Add driver for Mediatek watchdog

This patch adds a driver for the Mediatek SoC integrated
watchdog. This driver supports watchdog and software reset
for mt65xx and mt81xx SoCs.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: Eddie Huang <eddie.huang@mediatek.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agowatchdog: Fix omap watchdogs to enable the magic close bit
Tony Lindgren [Tue, 14 Oct 2014 19:25:19 +0000 (12:25 -0700)]
watchdog: Fix omap watchdogs to enable the magic close bit

This allows testing the watchdog easily with distros just by
doing pkill -9 watchdog.

Reported-by: Thomas Dziedzic <gostrc@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agowatchdog: rt2880_wdt: minor clean up
John Crispin [Thu, 16 Oct 2014 20:01:05 +0000 (22:01 +0200)]
watchdog: rt2880_wdt: minor clean up

Replace device_reset() with devm_reset_control_get() + reset_control_deassert().
Make use of watchdog_init_timeout() instead of setting the timeout manually.

Signed-off-by: John Crispin <blogic@openwrt.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agowatchdog: hpwdt: Fix initialization message in hpwdt.c
Masanari Iida [Wed, 22 Oct 2014 11:24:35 +0000 (20:24 +0900)]
watchdog: hpwdt: Fix initialization message in hpwdt.c

allow_kdump was enabled as default since following commit.

commit a089361cf5f1d6a5295aa5385238bd044998e1e9,
watchdog: hpwdt: Unregister NMI events on exit.

But the initialization message was not modified.
So it still shows

  HP Watchdog Timer Driver: NMI decoding initialized,
  allow kernel dump: ON (default = 0/OFF)    <=

This "default = 0/OFF" message may confuse users.
Fix it as "default = 1/ON".

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agowatchdog: it87_wdt: add IT8783 ID
Paolo Teti [Sun, 19 Oct 2014 19:39:33 +0000 (21:39 +0200)]
watchdog: it87_wdt: add IT8783 ID

IT8783 watchdog works as in IT872x

Tested on Adlink cPCI-6520 boards

Signed-off-by: Paolo Teti <paolo.teti@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agowatchdog: imx2: Constify struct regmap_config and watchdog_ops
Krzysztof Kozlowski [Mon, 5 Jan 2015 09:09:17 +0000 (10:09 +0100)]
watchdog: imx2: Constify struct regmap_config and watchdog_ops

The regmap_config struct may be const because it is not modified by the
driver and regmap_init() accepts pointer to const. Make struct
watchdog_ops const as well.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agoDT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation
Naidu Tellapati [Tue, 6 Jan 2015 13:19:35 +0000 (10:19 -0300)]
DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation

Add the devicetree binding document for ImgTec PDC Watchdog Timer.

Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Naidu Tellapati <Naidu.Tellapati@imgtec.com>
Signed-off-by: Jude Abraham <Jude.Abraham@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agowatchdog: ImgTec PDC Watchdog Timer Driver
Naidu Tellapati [Tue, 6 Jan 2015 13:19:34 +0000 (10:19 -0300)]
watchdog: ImgTec PDC Watchdog Timer Driver

This commit adds support for ImgTec PowerDown Controller Watchdog Timer.

Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Naidu Tellapati <Naidu.Tellapati@imgtec.com>
Signed-off-by: Jude Abraham <Jude.Abraham@imgtec.com>
[ezequiel: Minor style fixes]
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
7 years agonet: dsa: Set valid phy interface type
Guenter Roeck [Tue, 17 Feb 2015 05:23:51 +0000 (21:23 -0800)]
net: dsa: Set valid phy interface type

If the phy interface mode is not found in devicetree, or if devicetree
is not configured, of_get_phy_mode returns -ENODEV. The current code
sets the phy interface mode to the return value from of_get_phy_mode
without checking if it is valid.

This invalid phy interface mode is passed as parameter to of_phy_connect
or to phy_connect_direct. This sets the phy interface mode to the invalid
value, which in turn causes problems for any code using phydev->interface.

Fixes: b31f65fb4383 ("net: dsa: slave: Fix autoneg for phys on switch MDIO bus")
Fixes: 0d8bcdd383b8 ("net: dsa: allow for more complex PHY setups")
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>