6 years agoUSB: serial: keyspan_pda: verify endpoints at probe
Johan Hovold [Tue, 3 Jan 2017 15:39:48 +0000 (16:39 +0100)]
USB: serial: keyspan_pda: verify endpoints at probe

commit 5d9b0f859babe96175cd33d7162a9463a875ffde upstream.

Check for the expected endpoints in attach() and fail loudly if not

Note that failing to do this appears to be benign since da280e348866
("USB: keyspan_pda: clean up write-urb busy handling") which prevents a
NULL-pointer dereference in write() by never marking a non-existent
write-urb as free.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <>
[bwh: Backported to 3.2: add this check to the existing
 usb_serial_driver::attach implementation]
Signed-off-by: Ben Hutchings <>
6 years agoUSB: serial: iuu_phoenix: fix NULL-deref at open
Johan Hovold [Tue, 3 Jan 2017 15:39:47 +0000 (16:39 +0100)]
USB: serial: iuu_phoenix: fix NULL-deref at open

commit 90507d54f712d81b74815ef3a4bbb555cd9fab2f upstream.

Fix NULL-pointer dereference at open should the device lack a bulk-in or
bulk-out endpoint:

Unable to handle kernel NULL pointer dereference at virtual address 00000030
PC is at iuu_open+0x78/0x59c [iuu_phoenix]

Fixes: 07c3b1a10016 ("USB: remove broken usb-serial num_endpoints
Signed-off-by: Johan Hovold <>
[bwh: Backported to 3.2: add this check to the existing
 usb_serial_driver::attach implementation]
Signed-off-by: Ben Hutchings <>
6 years agoUSB: serial: io_ti: fix another NULL-deref at open
Johan Hovold [Tue, 3 Jan 2017 15:39:44 +0000 (16:39 +0100)]
USB: serial: io_ti: fix another NULL-deref at open

commit 4f9785cc99feeb3673993b471f646b4dbaec2cc1 upstream.

In case a device is left in "boot-mode" we must not register any port
devices in order to avoid a NULL-pointer dereference on open due to
missing endpoints. This could be used by a malicious device to trigger
an OOPS:

Unable to handle kernel NULL pointer dereference at virtual address 00000030
[<bf0caa84>] (edge_open [io_ti]) from [<bf0b0118>] (serial_port_activate+0x68/0x98 [usbserial])
[<bf0b0118>] (serial_port_activate [usbserial]) from [<c0470ca4>] (tty_port_open+0x9c/0xe8)
[<c0470ca4>] (tty_port_open) from [<bf0b0da0>] (serial_open+0x48/0x6c [usbserial])
[<bf0b0da0>] (serial_open [usbserial]) from [<c0469178>] (tty_open+0xcc/0x5cc)

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <>
[bwh: Backported to 3.2:
 - No heartbeat_work to initialise earlier
 - No separate port_probe and port_remove operations, so add check for null
   port pointers in edge_release()
 - Adjust context]
Signed-off-by: Ben Hutchings <>
6 years agoUSB: serial: io_ti: fix NULL-deref at open
Johan Hovold [Tue, 3 Jan 2017 15:39:43 +0000 (16:39 +0100)]
USB: serial: io_ti: fix NULL-deref at open

commit a323fefc6f5079844dc62ffeb54f491d0242ca35 upstream.

Fix NULL-pointer dereference when clearing halt at open should a
malicious device lack the expected endpoints when in download mode.

Unable to handle kernel NULL pointer dereference at virtual address 00000030
[<bf011ed8>] (edge_open [io_ti]) from [<bf000118>] (serial_port_activate+0x68/0x98 [usbserial])
[<bf000118>] (serial_port_activate [usbserial]) from [<c0470ca4>] (tty_port_open+0x9c/0xe8)
[<c0470ca4>] (tty_port_open) from [<bf000da0>] (serial_open+0x48/0x6c [usbserial])
[<bf000da0>] (serial_open [usbserial]) from [<c0469178>] (tty_open+0xcc/0x5cc)

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <>
Signed-off-by: Ben Hutchings <>
6 years agoUSB: serial: io_edgeport: fix NULL-deref at open
Johan Hovold [Tue, 3 Jan 2017 15:39:42 +0000 (16:39 +0100)]
USB: serial: io_edgeport: fix NULL-deref at open

commit 0dd408425eb21ddf26a692b3c8044c9e7d1a7948 upstream.

Fix NULL-pointer dereference when initialising URBs at open should a
non-EPIC device lack a bulk-in or interrupt-in endpoint.

Unable to handle kernel NULL pointer dereference at virtual address 00000028
PC is at edge_open+0x24c/0x3e8 [io_edgeport]

Note that the EPIC-device probe path has the required sanity checks so
this makes those checks partially redundant.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <>
Signed-off-by: Ben Hutchings <>
6 years agoUSB: serial: garmin_gps: fix memory leak on failed URB submit
Johan Hovold [Tue, 3 Jan 2017 15:39:41 +0000 (16:39 +0100)]
USB: serial: garmin_gps: fix memory leak on failed URB submit

commit c4ac4496e835b78a45dfbf74f6173932217e4116 upstream.

Make sure to free the URB transfer buffer in case submission fails (e.g.
due to a disconnect).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <>
Signed-off-by: Ben Hutchings <>
6 years agoUSB: serial: cyberjack: fix NULL-deref at open
Johan Hovold [Tue, 3 Jan 2017 15:39:40 +0000 (16:39 +0100)]
USB: serial: cyberjack: fix NULL-deref at open

commit 3dca01114dcecb1cf324534cd8d75fd1306a516b upstream.

Fix NULL-pointer dereference when clearing halt at open should the device
lack a bulk-out endpoint.

Unable to handle kernel NULL pointer dereference at virtual address 00000030
PC is at cyberjack_open+0x40/0x9c [cyberjack]

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <>
[bwh: Backported to 3.2: add this check to the existing
 usb_serial_driver::attach implementation]
Signed-off-by: Ben Hutchings <>
6 years agoxhci: free xhci virtual devices with leaf nodes first
Mathias Nyman [Tue, 3 Jan 2017 16:28:43 +0000 (18:28 +0200)]
xhci: free xhci virtual devices with leaf nodes first

commit ee8665e28e8d90ce69d4abe5a469c14a8707ae0e upstream.

the tt_info provided by a HS hub might be in use to by a child device
Make sure we free the devices in the correct order.

This is needed in special cases such as when xhci controller is
reset when resuming from hibernate, and all virt_devices are freed.

Also free the virt_devices starting from max slot_id as children
more commonly have higher slot_id than parent.

Reported-by: Guenter Roeck <>
Tested-by: Guenter Roeck <>
Signed-off-by: Mathias Nyman <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
6 years agoUSB: gadgetfs: fix checks of wTotalLength in config descriptors
Alan Stern [Fri, 9 Dec 2016 20:24:24 +0000 (15:24 -0500)]
USB: gadgetfs: fix checks of wTotalLength in config descriptors

commit 1c069b057dcf64fada952eaa868d35f02bb0cfc2 upstream.

Andrey Konovalov's fuzz testing of gadgetfs showed that we should
improve the driver's checks for valid configuration descriptors passed
in by the user.  In particular, the driver needs to verify that the
wTotalLength value in the descriptor is not too short (smaller
than USB_DT_CONFIG_SIZE).  And the check for whether wTotalLength is
too large has to be changed, because the driver assumes there is
always enough room remaining in the buffer to hold a device descriptor
(at least USB_DT_DEVICE_SIZE bytes).

This patch adds the additional check and fixes the existing check.  It
may do a little more than strictly necessary, but one extra check
won't hurt.

Signed-off-by: Alan Stern <>
CC: Andrey Konovalov <>
Signed-off-by: Felipe Balbi <>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <>
6 years agoUSB: gadgetfs: fix use-after-free bug
Alan Stern [Fri, 9 Dec 2016 20:18:43 +0000 (15:18 -0500)]
USB: gadgetfs: fix use-after-free bug

commit add333a81a16abbd4f106266a2553677a165725f upstream.

Andrey Konovalov reports that fuzz testing with syzkaller causes a
KASAN use-after-free bug report in gadgetfs:

BUG: KASAN: use-after-free in gadgetfs_setup+0x208a/0x20e0 at addr ffff88003dfe5bf2
Read of size 2 by task syz-executor0/22994
CPU: 3 PID: 22994 Comm: syz-executor0 Not tainted 4.9.0-rc7+ #16
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
 ffff88006df06a18 ffffffff81f96aba ffffffffe0528500 1ffff1000dbe0cd6
 ffffed000dbe0cce ffff88006df068f0 0000000041b58ab3 ffffffff8598b4c8
 ffffffff81f96828 1ffff1000dbe0ccd ffff88006df06708 ffff88006df06748
Call Trace:
 <IRQ> [  201.343209]  [<     inline     >] __dump_stack lib/dump_stack.c:15
 <IRQ> [  201.343209]  [<ffffffff81f96aba>] dump_stack+0x292/0x398 lib/dump_stack.c:51
 [<ffffffff817e4dec>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:159
 [<     inline     >] print_address_description mm/kasan/report.c:197
 [<ffffffff817e5080>] kasan_report_error+0x1f0/0x4e0 mm/kasan/report.c:286
 [<     inline     >] kasan_report mm/kasan/report.c:306
 [<ffffffff817e562a>] __asan_report_load_n_noabort+0x3a/0x40 mm/kasan/report.c:337
 [<     inline     >] config_buf drivers/usb/gadget/legacy/inode.c:1298
 [<ffffffff8322c8fa>] gadgetfs_setup+0x208a/0x20e0 drivers/usb/gadget/legacy/inode.c:1368
 [<ffffffff830fdcd0>] dummy_timer+0x11f0/0x36d0 drivers/usb/gadget/udc/dummy_hcd.c:1858
 [<ffffffff814807c1>] call_timer_fn+0x241/0x800 kernel/time/timer.c:1308
 [<     inline     >] expire_timers kernel/time/timer.c:1348
 [<ffffffff81482de6>] __run_timers+0xa06/0xec0 kernel/time/timer.c:1641
 [<ffffffff814832c1>] run_timer_softirq+0x21/0x80 kernel/time/timer.c:1654
 [<ffffffff84f4af8b>] __do_softirq+0x2fb/0xb63 kernel/softirq.c:284

The cause of the bug is subtle.  The dev_config() routine gets called
twice by the fuzzer.  The first time, the user data contains both a
full-speed configuration descriptor and a high-speed config
descriptor, causing dev->hs_config to be set.  But it also contains an
invalid device descriptor, so the buffer containing the descriptors is
deallocated and dev_config() returns an error.

The second time dev_config() is called, the user data contains only a
full-speed config descriptor.  But dev->hs_config still has the stale
pointer remaining from the first call, causing the routine to think
that there is a valid high-speed config.  Later on, when the driver
dereferences the stale pointer to copy that descriptor, we get a
use-after-free access.

The fix is simple: Clear dev->hs_config if the passed-in data does not
contain a high-speed config descriptor.

Signed-off-by: Alan Stern <>
Reported-by: Andrey Konovalov <>
Tested-by: Andrey Konovalov <>
Signed-off-by: Felipe Balbi <>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <>
6 years agoUSB: gadgetfs: fix unbounded memory allocation bug
Alan Stern [Fri, 9 Dec 2016 20:17:46 +0000 (15:17 -0500)]
USB: gadgetfs: fix unbounded memory allocation bug

commit faab50984fe6636e616c7cc3d30308ba391d36fd upstream.

Andrey Konovalov reports that fuzz testing with syzkaller causes a
KASAN warning in gadgetfs:

BUG: KASAN: slab-out-of-bounds in dev_config+0x86f/0x1190 at addr ffff88003c47e160
Write of size 65537 by task syz-executor0/6356
CPU: 3 PID: 6356 Comm: syz-executor0 Not tainted 4.9.0-rc7+ #19
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
 ffff88003c107ad8 ffffffff81f96aba ffffffff3dc11ef0 1ffff10007820eee
 ffffed0007820ee6 ffff88003dc11f00 0000000041b58ab3 ffffffff8598b4c8
 ffffffff81f96828 ffffffff813fb4a0 ffff88003b6eadc0 ffff88003c107738
Call Trace:
 [<     inline     >] __dump_stack lib/dump_stack.c:15
 [<ffffffff81f96aba>] dump_stack+0x292/0x398 lib/dump_stack.c:51
 [<ffffffff817e4dec>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:159
 [<     inline     >] print_address_description mm/kasan/report.c:197
 [<ffffffff817e5080>] kasan_report_error+0x1f0/0x4e0 mm/kasan/report.c:286
 [<ffffffff817e5705>] kasan_report+0x35/0x40 mm/kasan/report.c:306
 [<     inline     >] check_memory_region_inline mm/kasan/kasan.c:308
 [<ffffffff817e3fb9>] check_memory_region+0x139/0x190 mm/kasan/kasan.c:315
 [<ffffffff817e4044>] kasan_check_write+0x14/0x20 mm/kasan/kasan.c:326
 [<     inline     >] copy_from_user arch/x86/include/asm/uaccess.h:689
 [<     inline     >] ep0_write drivers/usb/gadget/legacy/inode.c:1135
 [<ffffffff83228caf>] dev_config+0x86f/0x1190 drivers/usb/gadget/legacy/inode.c:1759
 [<ffffffff817fdd55>] __vfs_write+0x5d5/0x760 fs/read_write.c:510
 [<ffffffff817ff650>] vfs_write+0x170/0x4e0 fs/read_write.c:560
 [<     inline     >] SYSC_write fs/read_write.c:607
 [<ffffffff81803a5b>] SyS_write+0xfb/0x230 fs/read_write.c:599
 [<ffffffff84f47ec1>] entry_SYSCALL_64_fastpath+0x1f/0xc2

Indeed, there is a comment saying that the value of len is restricted
to a 16-bit integer, but the code doesn't actually do this.

This patch fixes the warning.  It replaces the comment with a
computation that forces the amount of data copied from the user in
ep0_write() to be no larger than the wLength size for the control
transfer, which is a 16-bit quantity.

Signed-off-by: Alan Stern <>
Reported-by: Andrey Konovalov <>
Tested-by: Andrey Konovalov <>
Signed-off-by: Felipe Balbi <>
[bwh: Backported to 3.2 adjust filename]
Signed-off-by: Ben Hutchings <>
6 years agousb: gadgetfs: restrict upper bound on device configuration size
Greg Kroah-Hartman [Tue, 6 Dec 2016 07:36:29 +0000 (08:36 +0100)]
usb: gadgetfs: restrict upper bound on device configuration size

commit 0994b0a257557e18ee8f0b7c5f0f73fe2b54eec1 upstream.

Andrey Konovalov reported that we were not properly checking the upper
limit before of a device configuration size before calling
memdup_user(), which could cause some problems.

So set the upper limit to PAGE_SIZE * 4, which should be good enough for
all devices.

Reported-by: Andrey Konovalov <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Felipe Balbi <>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <>
6 years agoUSB: dummy-hcd: fix bug in stop_activity (handle ep0)
Alan Stern [Wed, 14 Dec 2016 19:55:56 +0000 (14:55 -0500)]
USB: dummy-hcd: fix bug in stop_activity (handle ep0)

commit bcdbeb844773333d2d1c08004f3b3e25921040e5 upstream.

The stop_activity() routine in dummy-hcd is supposed to unlink all
active requests for every endpoint, among other things.  But it
doesn't handle ep0.  As a result, fuzz testing can generate a WARNING
like the following:

WARNING: CPU: 0 PID: 4410 at drivers/usb/gadget/udc/dummy_hcd.c:672 dummy_free_request+0x153/0x170
Modules linked in:
CPU: 0 PID: 4410 Comm: syz-executor Not tainted 4.9.0-rc7+ #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
 ffff88006a64ed10 ffffffff81f96b8a ffffffff41b58ab3 1ffff1000d4c9d35
 ffffed000d4c9d2d ffff880065f8ac00 0000000041b58ab3 ffffffff8598b510
 ffffffff81f968f8 0000000041b58ab3 ffffffff859410e0 ffffffff813f0590
Call Trace:
 [<     inline     >] __dump_stack lib/dump_stack.c:15
 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51
 [<ffffffff812b808f>] __warn+0x19f/0x1e0 kernel/panic.c:550
 [<ffffffff812b831c>] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585
 [<ffffffff830fcb13>] dummy_free_request+0x153/0x170 drivers/usb/gadget/udc/dummy_hcd.c:672
 [<ffffffff830ed1b0>] usb_ep_free_request+0xc0/0x420 drivers/usb/gadget/udc/core.c:195
 [<ffffffff83225031>] gadgetfs_unbind+0x131/0x190 drivers/usb/gadget/legacy/inode.c:1612
 [<ffffffff830ebd8f>] usb_gadget_remove_driver+0x10f/0x2b0 drivers/usb/gadget/udc/core.c:1228
 [<ffffffff830ec084>] usb_gadget_unregister_driver+0x154/0x240 drivers/usb/gadget/udc/core.c:1357

This patch fixes the problem by iterating over all the endpoints in
the driver's ep array instead of iterating over the gadget's ep_list,
which explicitly leaves out ep0.

Signed-off-by: Alan Stern <>
Reported-by: Andrey Konovalov <>
Signed-off-by: Felipe Balbi <>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <>
6 years agousb: gadget: composite: Test get_alt() presence instead of set_alt()
Krzysztof Opasiak [Tue, 20 Dec 2016 18:52:16 +0000 (19:52 +0100)]
usb: gadget: composite: Test get_alt() presence instead of set_alt()

commit 7e4da3fcf7c9fe042f2f7cb7bf23861a899b4a8f upstream.

By convention (according to doc) if function does not provide
get_alt() callback composite framework should assume that it has only
altsetting 0 and should respond with error if host tries to set
other one.

After commit dd4dff8b035f ("USB: composite: Fix bug: should test
set_alt function pointer before use it")
we started checking set_alt() callback instead of get_alt().
This check is useless as we check if set_alt() is set inside
usb_add_function() and fail if it's NULL.

Let's fix this check and move comment about why we check the get
method instead of set a little bit closer to prevent future false

Fixes: dd4dff8b035f ("USB: composite: Fix bug: should test set_alt function pointer before use it")
Signed-off-by: Krzysztof Opasiak <>
Signed-off-by: Felipe Balbi <>
Signed-off-by: Ben Hutchings <>
6 years agonet/mlx4: Remove BUG_ON from ICM allocation routine
Leon Romanovsky [Thu, 29 Dec 2016 16:37:11 +0000 (18:37 +0200)]
net/mlx4: Remove BUG_ON from ICM allocation routine

commit c1d5f8ff80ea84768f5fae1ca9d1abfbb5e6bbaa upstream.

This patch removes BUG_ON() macro from mlx4_alloc_icm_coherent()
by checking DMA address alignment in advance and performing proper
folding in case of error.

Fixes: 5b0bf5e25efe ("mlx4_core: Support ICM tables in coherent memory")
Reported-by: Ozgur Karatas <>
Signed-off-by: Leon Romanovsky <>
Signed-off-by: Tariq Toukan <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
6 years agonet/mlx4_en: Fix bad WQE issue
Eugenia Emantayev [Thu, 29 Dec 2016 16:37:10 +0000 (18:37 +0200)]
net/mlx4_en: Fix bad WQE issue

commit 6496bbf0ec481966ef9ffe5b6660d8d1b55c60cc upstream.

Single send WQE in RX buffer should be stamped with software
ownership in order to prevent the flow of QP in error in FW
once UPDATE_QP is called.

Fixes: 9f519f68cfff ('mlx4_en: Not using Shared Receive Queues')
Signed-off-by: Eugenia Emantayev <>
Signed-off-by: Tariq Toukan <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
6 years agonet: korina: Fix NAPI versus resources freeing
Florian Fainelli [Sat, 24 Dec 2016 03:56:56 +0000 (19:56 -0800)]
net: korina: Fix NAPI versus resources freeing

commit e6afb1ad88feddf2347ea779cfaf4d03d3cd40b6 upstream.

Commit beb0babfb77e ("korina: disable napi on close and restart")
introduced calls to napi_disable() that were missing before,
unfortunately this leaves a small window during which NAPI has a chance
to run, yet we just freed resources since korina_free_ring() has been

Fix this by disabling NAPI first then freeing resource, and make sure
that we also cancel the restart task before doing the resource freeing.

Fixes: beb0babfb77e ("korina: disable napi on close and restart")
Reported-by: Alexandros C. Couloumbis <>
Signed-off-by: Florian Fainelli <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
6 years agonet, sched: fix soft lockup in tc_classify
Daniel Borkmann [Wed, 21 Dec 2016 17:04:11 +0000 (18:04 +0100)]
net, sched: fix soft lockup in tc_classify

commit 628185cfddf1dfb701c4efe2cfd72cf5b09f5702 upstream.

Shahar reported a soft lockup in tc_classify(), where we run into an
endless loop when walking the classifier chain due to tp->next == tp
which is a state we should never run into. The issue only seems to
trigger under load in the tc control path.

What happens is that in tc_ctl_tfilter(), thread A allocates a new
tp, initializes it, sets tp_created to 1, and calls into tp->ops->change()
with it. In that classifier callback we had to unlock/lock the rtnl
mutex and returned with -EAGAIN. One reason why we need to drop there
is, for example, that we need to request an action module to be loaded.

This happens via tcf_exts_validate() -> tcf_action_init/_1() meaning
after we loaded and found the requested action, we need to redo the
whole request so we don't race against others. While we had to unlock
rtnl in that time, thread B's request was processed next on that CPU.
Thread B added a new tp instance successfully to the classifier chain.
When thread A returned grabbing the rtnl mutex again, propagating -EAGAIN
and destroying its tp instance which never got linked, we goto replay
and redo A's request.

This time when walking the classifier chain in tc_ctl_tfilter() for
checking for existing tp instances we had a priority match and found
the tp instance that was created and linked by thread B. Now calling
again into tp->ops->change() with that tp was successful and returned
without error.

tp_created was never cleared in the second round, thus kernel thinks
that we need to link it into the classifier chain (once again). tp and
*back point to the same object due to the match we had earlier on. Thus
for thread B's already public tp, we reset tp->next to tp itself and
link it into the chain, which eventually causes the mentioned endless
loop in tc_classify() once a packet hits the data path.

Fix is to clear tp_created at the beginning of each request, also when
we replay it. On the paths that can cause -EAGAIN we already destroy
the original tp instance we had and on replay we really need to start
from scratch. It seems that this issue was first introduced in commit
12186be7d2e1 ("net_cls: fix unconfigured struct tcf_proto keeps chaining
and avoid kernel panic when we use cls_cgroup").

Fixes: 12186be7d2e1 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup")
Reported-by: Shahar Klein <>
Signed-off-by: Daniel Borkmann <>
Cc: Cong Wang <>
Acked-by: Eric Dumazet <>
Tested-by: Shahar Klein <>
Signed-off-by: David S. Miller <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
6 years agoInput: i8042 - add Pegatron touchpad to noloop table
Marcos Paulo de Souza [Sun, 18 Dec 2016 23:26:12 +0000 (15:26 -0800)]
Input: i8042 - add Pegatron touchpad to noloop table

commit 41c567a5d7d1a986763e58c3394782813c3bcb03 upstream.

Avoid AUX loopback in Pegatron C15B touchpad, so input subsystem is able
to recognize a Synaptics touchpad in the AUX port.

(Touchpad is not detected on DNS 0801480 notebook (PEGATRON C15B))

Suggested-by: Dmitry Torokhov <>
Signed-off-by: Marcos Paulo de Souza <>
Signed-off-by: Dmitry Torokhov <>
Signed-off-by: Ben Hutchings <>
6 years agotarget/iscsi: Fix double free in lio_target_tiqn_addtpg()
Dan Carpenter [Tue, 13 Dec 2016 12:27:04 +0000 (15:27 +0300)]
target/iscsi: Fix double free in lio_target_tiqn_addtpg()

commit a91918cd3ea11f91c68e08e1e8ce1b560447a80e upstream.

This iscsit_tpg_add_portal_group() function is only called from
lio_target_tiqn_addtpg().  Both functions free the "tpg" pointer on
error so it's a double free bug.  The memory is allocated in the caller
so it should be freed in the caller and not here.

Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1")
Signed-off-by: Dan Carpenter <>
Reviewed-by: David Disseldorp <>
[ bvanassche: Added "Fix" at start of patch title ]
Signed-off-by: Bart Van Assche <>
Signed-off-by: Ben Hutchings <>
6 years agoscsi: avoid a permanent stop of the scsi device's request queue
Wei Fang [Tue, 13 Dec 2016 01:25:21 +0000 (09:25 +0800)]
scsi: avoid a permanent stop of the scsi device's request queue

commit d2a145252c52792bc59e4767b486b26c430af4bb upstream.

A race between scanning and fc_remote_port_delete() may result in a
permanent stop if the device gets blocked before scsi_sysfs_add_sdev()
and unblocked after.  The reason is that blocking a device sets both the
SDEV_BLOCKED state and the QUEUE_FLAG_STOPPED.  However,
scsi_sysfs_add_sdev() unconditionally sets SDEV_RUNNING which causes the
device to be ignored by scsi_target_unblock() and thus never have its
QUEUE_FLAG_STOPPED cleared leading to a device which is apparently
running but has a stopped queue.

We actually have two places where SDEV_RUNNING is set: once in
scsi_add_lun() which respects the blocked flag and once in
scsi_sysfs_add_sdev() which doesn't.  Since the second set is entirely
spurious, simply remove it to fix the problem.

Reported-by: Zengxi Chen <>
Signed-off-by: Wei Fang <>
Reviewed-by: Ewan D. Milne <>
Signed-off-by: Martin K. Petersen <>
Signed-off-by: Ben Hutchings <>
6 years agoscsi: zfcp: fix rport unblock race with LUN recovery
Steffen Maier [Fri, 9 Dec 2016 16:16:33 +0000 (17:16 +0100)]
scsi: zfcp: fix rport unblock race with LUN recovery

commit 6f2ce1c6af37191640ee3ff6e8fc39ea10352f4c upstream.

It is unavoidable that zfcp_scsi_queuecommand() has to finish requests
with DID_IMM_RETRY (like fc_remote_port_chkready()) during the time
window when zfcp detected an unavailable rport but
fc_remote_port_delete(), which is asynchronous via
zfcp_scsi_schedule_rport_block(), has not yet blocked the rport.

However, for the case when the rport becomes available again, we should
prevent unblocking the rport too early.  In contrast to other FCP LLDDs,
zfcp has to open each LUN with the FCP channel hardware before it can
send I/O to a LUN.  So if a port already has LUNs attached and we
unblock the rport just after port recovery, recoveries of LUNs behind
this port can still be pending which in turn force
zfcp_scsi_queuecommand() to unnecessarily finish requests with

This also opens a time window with unblocked rport (until the followup
LUN reopen recovery has finished).  If a scsi_cmnd timeout occurs during
this time window fc_timed_out() cannot work as desired and such command
would indeed time out and trigger scsi_eh. This prevents a clean and
timely path failover.  This should not happen if the path issue can be
recovered on FC transport layer such as path issues involving RSCNs.

Fix this by only calling zfcp_scsi_schedule_rport_register(), to
asynchronously trigger fc_remote_port_add(), after all LUN recoveries as
children of the rport have finished and no new recoveries of equal or
higher order were triggered meanwhile.  Finished intentionally includes
any recovery result no matter if successful or failed (still unblock
rport so other successful LUNs work).  For simplicity, we check after
each finished LUN recovery if there is another LUN recovery pending on
the same port and then do nothing.  We handle the special case of a
successful recovery of a port without LUN children the same way without
changing this case's semantics.

For debugging we introduce 2 new trace records written if the rport
unblock attempt was aborted due to still unfinished or freshly triggered
recovery. The records are only written above the default trace level.

Benjamin noticed the important special case of new recovery that can be
triggered between having given up the erp_lock and before calling
zfcp_erp_action_cleanup() within zfcp_erp_strategy().  We must avoid the
following sequence:

ERP thread                 rport_work      other context
-------------------------  --------------  --------------------------------
port is unblocked, rport still blocked,
 due to pending/running ERP action,
 so ((port->status & ...UNBLOCK) != 0)
 and (port->rport == NULL)
unlock ERP
((status & ...UNBLOCK) != 0) [OLD!]
                                           lock ERP
                                           port->status clear ...UNBLOCK
                                           unlock ERP
                                           port->rport_task = RPORT_DEL
                           (port->rport_task != RPORT_ADD)
                           port->rport_task = RPORT_NONE
                           if (!port->rport) return
port->rport_task = RPORT_ADD
                           (port->rport_task == RPORT_ADD)
                           port->rport_task = RPORT_NONE
                           (port->rport == NULL)
                           rport = fc_remote_port_add()
                           port->rport = rport;

Now the rport was erroneously unblocked while the zfcp_port is blocked.
This is another situation we want to avoid due to scsi_eh
potential. This state would at least remain until the new recovery from
the other context finished successfully, or potentially forever if it
failed.  In order to close this race, we take the erp_lock inside
zfcp_erp_try_rport_unblock() when checking the status of zfcp_port or
LUN.  With that, the possible corresponding rport state sequences would
be: (unblock[ERP thread],block[other context]) if the ERP thread gets
erp_lock first and still sees ((port->status & ...UNBLOCK) != 0),
(block[other context],NOP[ERP thread]) if the ERP thread gets erp_lock
after the other context has already cleard ...UNBLOCK from port->status.

Since checking fields of struct erp_action is unsafe because they could
have been overwritten (re-used for new recovery) meanwhile, we only
check status of zfcp_port and LUN since these are only changed under
erp_lock elsewhere. Regarding the check of the proper status flags (port
or port_forced are similar to the shown adapter recovery):

  * clear UNBLOCK ---------------------------------------+
 zfcp_scsi_schedule_rports_block()                       |
 write_lock_irqsave(&adapter->erp_lock, flags);-------+  |
 zfcp_erp_action_enqueue()                            |  |
  zfcp_erp_setup_act()                                |  |
   * set ERP_INUSE -----------------------------------|--|--+
 write_unlock_irqrestore(&adapter->erp_lock, flags);--+  |  |
.context-switch.                                         |  |
zfcp_erp_thread()                                        |  |
 zfcp_erp_strategy()                                     |  |
  write_lock_irqsave(&adapter->erp_lock, flags);------+  |  |
  ...                                                 |  |  |
  zfcp_erp_strategy_check_target()                    |  |  |
   zfcp_erp_strategy_check_adapter()                  |  |  |
    zfcp_erp_adapter_unblock()                        |  |  |
     * set UNBLOCK -----------------------------------|--+  |
  zfcp_erp_action_dequeue()                           |     |
   * clear ERP_INUSE ---------------------------------|-----+
  ...                                                 |
  write_unlock_irqrestore(&adapter->erp_lock, flags);-+

Hence, we should check for both UNBLOCK and ERP_INUSE because they are
interleaved.  Also we need to explicitly check ERP_FAILED for the link
down case which currently does not clear the UNBLOCK flag in

Signed-off-by: Steffen Maier <>
Fixes: 8830271c4819 ("[SCSI] zfcp: Dont fail SCSI commands when transitioning to blocked fc_rport")
Fixes: a2fa0aede07c ("[SCSI] zfcp: Block FC transport rports early on errors")
Fixes: 5f852be9e11d ("[SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI")
Fixes: 338151e06608 ("[SCSI] zfcp: make use of fc_remote_port_delete when target port is unavailable")
Fixes: 3859f6a248cb ("[PATCH] zfcp: add rports to enable scsi_add_device to work again")
Reviewed-by: Benjamin Block <>
Signed-off-by: Martin K. Petersen <>
Signed-off-by: Ben Hutchings <>
6 years agoscsi: zfcp: do not trace pure benign residual HBA responses at default level
Steffen Maier [Fri, 9 Dec 2016 16:16:32 +0000 (17:16 +0100)]
scsi: zfcp: do not trace pure benign residual HBA responses at default level

commit 56d23ed7adf3974f10e91b643bd230e9c65b5f79 upstream.

Since quite a while, Linux issues enough SCSI commands per scsi_device
which successfully return with FCP_RESID_UNDER, FSF_FCP_RSP_AVAILABLE,
and SAM_STAT_GOOD.  This floods the HBA trace area and we cannot see
other and important HBA trace records long enough.

Therefore, do not trace HBA response errors for pure benign residual
under counts at the default trace level.

This excludes benign residual under count combined with other validity
bits set in FCP_RSP_IU, such as FCP_SNS_LEN_VAL.  For all those other
cases, we still do want to see both the HBA record and the corresponding
SCSI record by default.

Signed-off-by: Steffen Maier <>
Fixes: a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
Reviewed-by: Benjamin Block <>
Signed-off-by: Martin K. Petersen <>
Signed-off-by: Ben Hutchings <>
6 years agoscsi: zfcp: fix use-after-"free" in FC ingress path after TMF
Benjamin Block [Fri, 9 Dec 2016 16:16:31 +0000 (17:16 +0100)]
scsi: zfcp: fix use-after-"free" in FC ingress path after TMF

commit dac37e15b7d511e026a9313c8c46794c144103cd upstream.

When SCSI EH invokes zFCP's callbacks for eh_device_reset_handler() and
eh_target_reset_handler(), it expects us to relent the ownership over
the given scsi_cmnd and all other scsi_cmnds within the same scope - LUN
or target - when returning with SUCCESS from the callback ('release'
them).  SCSI EH can then reuse those commands.

We did not follow this rule to release commands upon SUCCESS; and if
later a reply arrived for one of those supposed to be released commands,
we would still make use of the scsi_cmnd in our ingress tasklet. This
will at least result in undefined behavior or a kernel panic because of
a wrong kernel pointer dereference.

To fix this, we NULLify all pointers to scsi_cmnds (struct zfcp_fsf_req
*)->data in the matching scope if a TMF was successful. This is done
under the locks (struct zfcp_adapter *)->abort_lock and (struct
zfcp_reqlist *)->lock to prevent the requests from being removed from
the request-hashtable, and the ingress tasklet from making use of the
scsi_cmnd-pointer in zfcp_fsf_fcp_cmnd_handler().

For cases where a reply arrives during SCSI EH, but before we get a
chance to NULLify the pointer - but before we return from the callback
-, we assume that the code is protected from races via the CAS operation
in blk_complete_request() that is called in scsi_done().

The following stacktrace shows an example for a crash resulting from the
previous behavior:

Unable to handle kernel pointer dereference at virtual kernel address fffffee17a672000
Oops: 0038 [#1] SMP
CPU: 2 PID: 0 Comm: swapper/2 Not tainted
task: 00000003f7ff5be0 ti: 00000003f3d38000 task.ti: 00000003f3d38000
Krnl PSW : 0404d00180000000 00000000001156b0 (smp_vcpu_scheduled+0x18/0x40)
           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 EA:3
Krnl GPRS: 000000200000007e 0000000000000000 fffffee17a671fd8 0000000300000015
           ffffffff80000000 00000000005dfde8 07000003f7f80e00 000000004fa4e800
           000000036ce8d8f8 000000036ce8d9c0 00000003ece8fe00 ffffffff969c9e93
           00000003fffffffd 000000036ce8da10 00000000003bf134 00000003f3b07918
Krnl Code: 00000000001156a2a7190000        lghi    %r1,0
           00000000001156a6a7380015        lhi    %r3,21
          #00000000001156aae32050000008    ag    %r2,0(%r5)
          >00000000001156b0482022b0        lh    %r2,688(%r2)
           00000000001156b4ae123000        sigp    %r1,%r2,0(%r3)
           00000000001156b8b2220020        ipm    %r2
           00000000001156bc8820001c        srl    %r2,28
           00000000001156c0c02700000001    xilf    %r2,1
Call Trace:
([<0000000000000000>] 0x0)
 [<000003ff807bdb8e>] zfcp_fsf_fcp_cmnd_handler+0x3de/0x490 [zfcp]
 [<000003ff807be30a>] zfcp_fsf_req_complete+0x252/0x800 [zfcp]
 [<000003ff807c0a48>] zfcp_fsf_reqid_check+0xe8/0x190 [zfcp]
 [<000003ff807c194e>] zfcp_qdio_int_resp+0x66/0x188 [zfcp]
 [<000003ff80440c64>] qdio_kick_handler+0xdc/0x310 [qdio]
 [<000003ff804463d0>] __tiqdio_inbound_processing+0xf8/0xcd8 [qdio]
 [<0000000000141fd4>] tasklet_action+0x9c/0x170
 [<0000000000141550>] __do_softirq+0xe8/0x258
 [<000000000010ce0a>] do_softirq+0xba/0xc0
 [<000000000014187c>] irq_exit+0xc4/0xe8
 [<000000000046b526>] do_IRQ+0x146/0x1d8
 [<00000000005d6a3c>] io_return+0x0/0x8
 [<00000000005d6422>] vtime_stop_cpu+0x4a/0xa0
([<0000000000000000>] 0x0)
 [<0000000000103d8a>] arch_cpu_idle+0xa2/0xb0
 [<0000000000197f94>] cpu_startup_entry+0x13c/0x1f8
 [<0000000000114782>] smp_start_secondary+0xda/0xe8
 [<00000000005d6efe>] restart_int_handler+0x56/0x6c
 [<0000000000000000>] 0x0
Last Breaking-Event-Address:
 [<00000000003bf12e>] arch_spin_lock_wait+0x56/0xb0

Suggested-by: Steffen Maier <>
Signed-off-by: Benjamin Block <>
Fixes: ea127f9754 ("[PATCH] s390 (7/7): zfcp host adapter.") (tglx/history.git)
Signed-off-by: Steffen Maier <>
Signed-off-by: Martin K. Petersen <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
6 years agoIB/multicast: Check ib_find_pkey() return value
Bart Van Assche [Mon, 21 Nov 2016 18:22:17 +0000 (10:22 -0800)]
IB/multicast: Check ib_find_pkey() return value

commit d3a2418ee36a59bc02e9d454723f3175dcf4bfd9 upstream.

This patch avoids that Coverity complains about not checking the
ib_find_pkey() return value.

Fixes: commit 547af76521b3 ("IB/multicast: Report errors on multicast groups if P_key changes")
Signed-off-by: Bart Van Assche <>
Cc: Sean Hefty <>
Signed-off-by: Doug Ledford <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
6 years agoIB/mad: Fix an array index check
Bart Van Assche [Mon, 21 Nov 2016 18:21:17 +0000 (10:21 -0800)]
IB/mad: Fix an array index check

commit 2fe2f378dd45847d2643638c07a7658822087836 upstream.

The array ib_mad_mgmt_class_table.method_table has MAX_MGMT_CLASS
(80) elements. Hence compare the array index with that value instead
of with IB_MGMT_MAX_METHODS (128). This patch avoids that Coverity
reports the following:

Overrunning array class->method_table of 80 8-byte elements at element index 127 (byte offset 1016) using index convert_mgmt_class(mad_hdr->mgmt_class) (which evaluates to 127).

Fixes: commit b7ab0b19a85f ("IB/mad: Verify mgmt class in received MADs")
Signed-off-by: Bart Van Assche <>
Cc: Sean Hefty <>
Reviewed-by: Hal Rosenstock <>
Signed-off-by: Doug Ledford <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
6 years agoblock_dev: don't test bdev->bd_contains when it is not stable
NeilBrown [Mon, 12 Dec 2016 15:21:51 +0000 (08:21 -0700)]
block_dev: don't test bdev->bd_contains when it is not stable

commit bcc7f5b4bee8e327689a4d994022765855c807ff upstream.

bdev->bd_contains is not stable before calling __blkdev_get().
When __blkdev_get() is called on a parition with ->bd_openers == 0
it sets
  bdev->bd_contains = bdev;
which is not correct for a partition.
After a call to __blkdev_get() succeeds, ->bd_openers will be > 0
and then ->bd_contains is stable.

When FMODE_EXCL is used, blkdev_get() calls
   bd_start_claiming() ->  bd_prepare_to_claim() -> bd_may_claim()

This call happens before __blkdev_get() is called, so ->bd_contains
is not stable.  So bd_may_claim() cannot safely use ->bd_contains.
It currently tries to use it, and this can lead to a BUG_ON().

This happens when a whole device is already open with a bd_holder (in
use by dm in my particular example) and two threads race to open a
partition of that device for the first time, one opening with O_EXCL and
one without.

The thread that doesn't use O_EXCL gets through blkdev_get() to
__blkdev_get(), gains the ->bd_mutex, and sets bdev->bd_contains = bdev;

Immediately thereafter the other thread, using FMODE_EXCL, calls
bd_start_claiming() from blkdev_get().  This should fail because the
whole device has a holder, but because bdev->bd_contains == bdev
bd_may_claim() incorrectly reports success.
This thread continues and blocks on bd_mutex.

The first thread then sets bdev->bd_contains correctly and drops the mutex.
The thread using FMODE_EXCL then continues and when it calls bd_may_claim()
again in:
BUG_ON(!bd_may_claim(bdev, whole, holder));
The BUG_ON fires.

Fix this by removing the dependency on ->bd_contains in
bd_may_claim().  As bd_may_claim() has direct access to the whole
device, it can simply test if the target bdev is the whole device.

Fixes: 6b4517a7913a ("block: implement bd_claiming and claiming block")
Signed-off-by: NeilBrown <>
Signed-off-by: Jens Axboe <>
Signed-off-by: Ben Hutchings <>
6 years agofsnotify: Fix possible use-after-free in inode iteration on umount
Jan Kara [Mon, 12 Dec 2016 15:08:41 +0000 (16:08 +0100)]
fsnotify: Fix possible use-after-free in inode iteration on umount

commit 5716863e0f8251d3360d4cbfc0e44e08007075df upstream.

fsnotify_unmount_inodes() plays complex tricks to pin next inode in the
sb->s_inodes list when iterating over all inodes. Furthermore the code has a
bug that if the current inode is the last on i_sb_list that does not have e.g.
I_FREEING set, then we leave next_i pointing to inode which may get removed
from the i_sb_list once we drop s_inode_list_lock thus resulting in
use-after-free issues (usually manifesting as infinite looping in

Fix the problem by keeping current inode pinned somewhat longer. Then we can
make the code much simpler and standard.

Signed-off-by: Jan Kara <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
6 years agolibceph: verify authorize reply on connect
Ilya Dryomov [Fri, 2 Dec 2016 15:35:09 +0000 (16:35 +0100)]
libceph: verify authorize reply on connect

commit 5c056fdc5b474329037f2aa18401bd73033e0ce0 upstream.

After sending an authorizer (ceph_x_authorize_a + ceph_x_authorize_b),
the client gets back a ceph_x_authorize_reply, which it is supposed to
verify to ensure the authenticity and protect against replay attacks.
The code for doing this is there (ceph_x_verify_authorizer_reply(),
ceph_auth_verify_authorizer_reply() + plumbing), but it is never
invoked by the the messenger.

AFAICT this goes back to 2009, when ceph authentication protocols
support was added to the kernel client in 4e7a5dcd1bba ("ceph:
negotiate authentication protocol; implement AUTH_NONE protocol").

The second param of ceph_connection_operations::verify_authorizer_reply
is unused all the way down.  Pass 0 to facilitate backporting, and kill
it in the next commit.

Signed-off-by: Ilya Dryomov <>
Reviewed-by: Sage Weil <>
Signed-off-by: Ben Hutchings <>
6 years agos390/vmlogrdr: fix IUCV buffer allocation
Gerald Schaefer [Mon, 21 Nov 2016 11:13:58 +0000 (12:13 +0100)]
s390/vmlogrdr: fix IUCV buffer allocation

commit 5457e03de918f7a3e294eb9d26a608ab8a579976 upstream.

The buffer for iucv_message_receive() needs to be below 2 GB. In
__iucv_message_receive(), the buffer address is casted to an u32, which
would result in either memory corruption or an addressing exception when
using addresses >= 2 GB.

Fix this by using GFP_DMA for the buffer allocation.

Signed-off-by: Gerald Schaefer <>
Signed-off-by: Martin Schwidefsky <>
Signed-off-by: Ben Hutchings <>
6 years agosparc: leon: Fix a retry loop in leon_init_timers()
Dan Carpenter [Fri, 25 Nov 2016 11:25:54 +0000 (14:25 +0300)]
sparc: leon: Fix a retry loop in leon_init_timers()

commit 601e6e3cc5bf6adb7d076fe24d10f6191a25ba9b upstream.

The original code causes a static checker warning because it has a
continue inside a do { } while (0); loop.  In that context, a continue
and a break are equivalent.  The intent was to go back to the start of
the loop so the continue was a bug.

I've added a retry label at the start and changed the continue to a goto
retry.  Then I removed the do { } while (0) loop and pulled the code in
one indent level.

Fixes: 2791c1a43900 ("SPARC/LEON: added support for selecting Timer Core and Timer within core")
Signed-off-by: Dan Carpenter <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
6 years agokconfig/nconf: Fix hang when editing symbol with a long prompt
Ben Hutchings [Thu, 24 Nov 2016 22:10:23 +0000 (22:10 +0000)]
kconfig/nconf: Fix hang when editing symbol with a long prompt

commit 79e51b5c2deea542b3bb8c66e0d502230b017dde upstream.

Currently it is impossible to edit the value of a config symbol with a
prompt longer than (terminal width - 2) characters.  dialog_inputbox()
calculates a negative x-offset for the input window and newwin() fails
as this is invalid.  It also doesn't check for this failure, so it
busy-loops calling wgetch(NULL) which immediately returns -1.

The additions in the offset calculations also don't match the intended
size of the window.

Limit the window size and calculate the offset similarly to

Fixes: 692d97c380c6 ("kconfig: new configuration interface (nconfig)")
Signed-off-by: Ben Hutchings <>
[bwh: Backported to 3.2: replaced code used LINES and COLS]
Signed-off-by: Ben Hutchings <>
6 years agoext4: reject inodes with negative size
Darrick J. Wong [Sat, 10 Dec 2016 14:55:01 +0000 (09:55 -0500)]
ext4: reject inodes with negative size

commit 7e6e1ef48fc02f3ac5d0edecbb0c6087cd758d58 upstream.

Don't load an inode with a negative size; this causes integer overflow
problems in the VFS.

[ Added EXT4_ERROR_INODE() to mark file system as corrupted. -TYT]

Fixes: a48380f769df (ext4: rename i_dir_acl to i_size_high)
Signed-off-by: Darrick J. Wong <>
Signed-off-by: Theodore Ts'o <>
[bwh: Backported to 3.2: use EIO instead of EFSCORRUPTED]
Signed-off-by: Ben Hutchings <>
6 years agonfs_write_end(): fix handling of short copies
Al Viro [Tue, 6 Sep 2016 01:42:32 +0000 (21:42 -0400)]
nfs_write_end(): fix handling of short copies

commit c0cf3ef5e0f47e385920450b245d22bead93e7ad upstream.

What matters when deciding if we should make a page uptodate is
not how much we _wanted_ to copy, but how much we actually have
copied.  As it is, on architectures that do not zero tail on
short copy we can leave uninitialized data in page marked uptodate.

Signed-off-by: Al Viro <>
Signed-off-by: Ben Hutchings <>
6 years agohwmon: (ds620) Fix overflows seen when writing temperature limits
Guenter Roeck [Sun, 20 Nov 2016 18:37:39 +0000 (10:37 -0800)]
hwmon: (ds620) Fix overflows seen when writing temperature limits

commit e36ce99ee0815d7919a7b589bfb66f3de50b6bc7 upstream.

Module test reports:

temp1_max: Suspected overflow: [160000 vs. 0]
temp1_min: Suspected overflow: [160000 vs. 0]

This is seen because the values passed when writing temperature limits
are unbound.

Reviewed-by: Jean Delvare <>
Fixes: 6099469805c2 ("hwmon: Support for Dallas Semiconductor DS620")
Signed-off-by: Guenter Roeck <>
Signed-off-by: Ben Hutchings <>
6 years agoUSB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041
Daniele Palmas [Thu, 1 Dec 2016 15:38:39 +0000 (16:38 +0100)]
USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041

commit 5b09eff0c379002527ad72ea5ea38f25da8a8650 upstream.

This patch adds support for PIDs 0x1040, 0x1041 of Telit LE922A.

Since the interface positions are the same than the ones used
for other Telit compositions, previous defined blacklists are used.

Signed-off-by: Daniele Palmas <>
Signed-off-by: Johan Hovold <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
6 years agoALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks
Con Kolivas [Fri, 9 Dec 2016 04:15:57 +0000 (15:15 +1100)]
ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks

commit 82ffb6fc637150b279f49e174166d2aa3853eaf4 upstream.

The Logitech QuickCam Communicate Deluxe/S7500 microphone fails with the
following warning.

[    6.778995] usb 2- Warning! Unlikely big volume range (=3072),
cval->res is probably wrong.
[    6.778996] usb 2- [5] FU [Mic Capture Volume] ch = 1, val =

Adding it to the list of devices in volume_control_quirks makes it work
properly, fixing related typo.

Signed-off-by: Con Kolivas <>
Signed-off-by: Takashi Iwai <>
Signed-off-by: Ben Hutchings <>
6 years agohotplug: Make register and unregister notifier API symmetric
Michal Hocko [Wed, 7 Dec 2016 13:54:38 +0000 (14:54 +0100)]
hotplug: Make register and unregister notifier API symmetric

commit 777c6e0daebb3fcefbbd6f620410a946b07ef6d0 upstream.

Yu Zhao has noticed that __unregister_cpu_notifier only unregisters its
notifiers when HOTPLUG_CPU=y while the registration might succeed even
when HOTPLUG_CPU=n if MODULE is enabled. This means that e.g. zswap
might keep a stale notifier on the list on the manual clean up during
the pool tear down and thus corrupt the list. Resulting in the following

[  144.964346] BUG: unable to handle kernel paging request at ffff880658a2be78
[  144.971337] IP: [<ffffffffa290b00b>] raw_notifier_chain_register+0x1b/0x40
[  145.122628] Call Trace:
[  145.125086]  [<ffffffffa28e5cf8>] __register_cpu_notifier+0x18/0x20
[  145.131350]  [<ffffffffa2a5dd73>] zswap_pool_create+0x273/0x400
[  145.137268]  [<ffffffffa2a5e0fc>] __zswap_param_set+0x1fc/0x300
[  145.143188]  [<ffffffffa2944c1d>] ? trace_hardirqs_on+0xd/0x10
[  145.149018]  [<ffffffffa2908798>] ? kernel_param_lock+0x28/0x30
[  145.154940]  [<ffffffffa2a3e8cf>] ? __might_fault+0x4f/0xa0
[  145.160511]  [<ffffffffa2a5e237>] zswap_compressor_param_set+0x17/0x20
[  145.167035]  [<ffffffffa2908d3c>] param_attr_store+0x5c/0xb0
[  145.172694]  [<ffffffffa290848d>] module_attr_store+0x1d/0x30
[  145.178443]  [<ffffffffa2b2b41f>] sysfs_kf_write+0x4f/0x70
[  145.183925]  [<ffffffffa2b2a5b9>] kernfs_fop_write+0x149/0x180
[  145.189761]  [<ffffffffa2a99248>] __vfs_write+0x18/0x40
[  145.194982]  [<ffffffffa2a9a412>] vfs_write+0xb2/0x1a0
[  145.200122]  [<ffffffffa2a9a732>] SyS_write+0x52/0xa0
[  145.205177]  [<ffffffffa2ff4d97>] entry_SYSCALL_64_fastpath+0x12/0x17

This can be even triggered manually by changing
/sys/module/zswap/parameters/compressor multiple times.

Fix this issue by making unregister APIs symmetric to the register so
there are no surprises.

Fixes: 47e627bc8c9a ("[PATCH] hotplug: Allow modules to use the cpu hotplug notifiers even if !CONFIG_HOTPLUG_CPU")
Reported-and-tested-by: Yu Zhao <>
Signed-off-by: Michal Hocko <>
Cc: Andrew Morton <>
Cc: Dan Streetman <>
Signed-off-by: Thomas Gleixner <>
[bwh: Backported to 3.2:
 - The lockless (__-prefixed) variants don't exist
 - Keep definition of cpu_notify_nofail() conditional on CONFIG_HOTPLUG_CPU]
Signed-off-by: Ben Hutchings <>
6 years agoUSB: cdc-acm: add device id for GW Instek AFG-125
Nathaniel Quillin [Mon, 5 Dec 2016 14:53:00 +0000 (06:53 -0800)]
USB: cdc-acm: add device id for GW Instek AFG-125

commit 301216044e4c27d5a7323c1fa766266fad00db5e upstream.

Add device-id entry for GW Instek AFG-125, which has a byte swapped
bInterfaceSubClass (0x20).

Signed-off-by: Nathaniel Quillin <>
Acked-by: Oliver Neukum <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
6 years agoBtrfs: fix tree search logic when replaying directory entry deletes
Robbie Ko [Fri, 7 Oct 2016 09:30:47 +0000 (17:30 +0800)]
Btrfs: fix tree search logic when replaying directory entry deletes

commit 2a7bf53f577e49c43de4ffa7776056de26db65d9 upstream.

If a log tree has a layout like the following:

leaf N:
        item 240 key (282 DIR_LOG_ITEM 0) itemoff 8189 itemsize 8
                dir log end 1275809046
leaf N + 1:
        item 0 key (282 DIR_LOG_ITEM 3936149215) itemoff 16275 itemsize 8
                dir log end 18446744073709551615

When we pass the value 1275809046 + 1 as the parameter start_ret to the
function tree-log.c:find_dir_range() (done by replay_dir_deletes()), we
end up with path->slots[0] having the value 239 (points to the last item
of leaf N, item 240). Because the dir log item in that position has an
offset value smaller than *start_ret (1275809046 + 1) we need to move on
to the next leaf, however the logic for that is wrong since it compares
the current slot to the number of items in the leaf, which is smaller
and therefore we don't lookup for the next leaf but instead we set the
slot to point to an item that does not exist, at slot 240, and we later
operate on that slot which has unexpected content or in the worst case
can result in an invalid memory access (accessing beyond the last page
of leaf N's extent buffer).

So fix the logic that checks when we need to lookup at the next leaf
by first incrementing the slot and only after to check if that slot
is beyond the last item of the current leaf.

Signed-off-by: Robbie Ko <>
Reviewed-by: Filipe Manana <>
Fixes: e02119d5a7b4 (Btrfs: Add a write ahead tree log to optimize synchronous operations)
Signed-off-by: Filipe Manana <>
[Modified changelog for clarity and correctness]
Signed-off-by: Ben Hutchings <>
6 years agopowerpc/ps3: Fix system hang with GCC 5 builds
Geoff Levand [Tue, 29 Nov 2016 18:47:32 +0000 (10:47 -0800)]
powerpc/ps3: Fix system hang with GCC 5 builds

commit 6dff5b67054e17c91bd630bcdda17cfca5aa4215 upstream.

GCC 5 generates different code for this bootwrapper null check that
causes the PS3 to hang very early in its bootup. This check is of
limited value, so just get rid of it.

Signed-off-by: Geoff Levand <>
Signed-off-by: Michael Ellerman <>
Signed-off-by: Ben Hutchings <>
6 years agodrivers: base: dma-mapping: Fix typo in dmam_alloc_non_coherent comments
Florian Fainelli [Wed, 30 Nov 2016 01:21:05 +0000 (17:21 -0800)]
drivers: base: dma-mapping: Fix typo in dmam_alloc_non_coherent comments

commit cd74da957ba2d03787ede1c22bbb183d9c728aad upstream.

The function we are wrapping is named dma_alloc_noncoherent, and
not dma_alloc_non_coherent.

Fixes: 9ac7849e35f70 ("devres: device resource management")
Signed-off-by: Florian Fainelli <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
6 years agoUSB: serial: kl5kusb105: abort on open exception path
Pan Bian [Tue, 29 Nov 2016 15:55:02 +0000 (16:55 +0100)]
USB: serial: kl5kusb105: abort on open exception path

commit 3c3dd1e058cb01e835dcade4b54a6f13ffaeaf7c upstream.

Function klsi_105_open() calls usb_control_msg() (to "enable read") and
checks its return value. When the return value is unexpected, it only
assigns the error code to the return variable retval, but does not
terminate the exception path. This patch fixes the bug by inserting
"goto err_generic_close;" when the call to usb_control_msg() fails.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Pan Bian <>
[johan: rebase on prerequisite fix and amend commit message]
Signed-off-by: Johan Hovold <>
Signed-off-by: Ben Hutchings <>
6 years agoUSB: serial: kl5kusb105: fix open error path
Johan Hovold [Tue, 29 Nov 2016 15:55:01 +0000 (16:55 +0100)]
USB: serial: kl5kusb105: fix open error path

commit 6774d5f53271d5f60464f824748995b71da401ab upstream.

Kill urbs and disable read before returning from open on failure to
retrieve the line state.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <>
[bwh: Backported to 3.2: replaced code was using dbg()]
Signed-off-by: Ben Hutchings <>
6 years agothermal: hwmon: Properly report critical temperature in sysfs
Krzysztof Kozlowski [Tue, 22 Nov 2016 17:22:44 +0000 (19:22 +0200)]
thermal: hwmon: Properly report critical temperature in sysfs

commit f37fabb8643eaf8e3b613333a72f683770c85eca upstream.

In the critical sysfs entry the thermal hwmon was returning wrong
temperature to the user-space.  It was reporting the temperature of the
first trip point instead of the temperature of critical trip point.

For example:

Since commit e68b16abd91d ("thermal: add hwmon sysfs I/F") the driver
have been registering a sysfs entry if get_crit_temp() callback was
provided.  However when accessed, it was calling get_trip_temp() instead
of the get_crit_temp().

Fixes: e68b16abd91d ("thermal: add hwmon sysfs I/F")
Signed-off-by: Krzysztof Kozlowski <>
Signed-off-by: Zhang Rui <>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <>
6 years agoALSA: usb-audio: Fix bogus error return in snd_usb_create_stream()
Takashi Iwai [Tue, 29 Nov 2016 21:28:40 +0000 (22:28 +0100)]
ALSA: usb-audio: Fix bogus error return in snd_usb_create_stream()

commit 4763601a56f155ddf94ef35fc2c41504a2de15f5 upstream.

The function returns -EINVAL even if it builds the stream properly.
The bogus error code sneaked in during the code refactoring, but it
wasn't noticed until now since the returned error code itself is
ignored in anyway.  Kill it here, but there is no behavior change by
this patch, obviously.

Fixes: e5779998bf8b ('ALSA: usb-audio: refactor code')
Signed-off-by: Takashi Iwai <>
Signed-off-by: Ben Hutchings <>
6 years agoregmap: cache: Remove unused 'blksize' variable
Kirtika Ruchandani [Fri, 25 Nov 2016 00:51:17 +0000 (16:51 -0800)]
regmap: cache: Remove unused 'blksize' variable

commit daaadbf07433b15c452b2ff411a293b2ccd98e03 upstream.

Commit 2cbbb579bcbe ("regmap: Add the LZO cache support") introduced
'blksize' in  regcache_lzo_read() and regcache_lzo_write(), that is
set but not used. Compiling with W=1 gives the following warnings,
fix them.

drivers/base/regmap/regcache-lzo.c: In function ‘regcache_lzo_read’:
drivers/base/regmap/regcache-lzo.c:239:9: warning: variable ‘blksize’ set but not used [-Wunused-but-set-variable]
  size_t blksize, tmp_dst_len;
drivers/base/regmap/regcache-lzo.c: In function ‘regcache_lzo_write’:
drivers/base/regmap/regcache-lzo.c:278:9: warning: variable ‘blksize’ set but not used [-Wunused-but-set-variable]
  size_t blksize, tmp_dst_len;

These are harmless warnings and are only being fixed to reduce the
noise with W=1 in the kernel.

Fixes: 2cbbb579bcbe ("regmap: Add the LZO cache support")
Cc: Dimitris Papastamos <>
Cc: Mark Brown <>
Signed-off-by: Kirtika Ruchandani <>
Signed-off-by: Mark Brown <>
Signed-off-by: Ben Hutchings <>
6 years agoDaVinci-VPFE-Capture: fix error handling
Arnd Bergmann [Tue, 22 Nov 2016 20:52:17 +0000 (18:52 -0200)]
DaVinci-VPFE-Capture: fix error handling

commit d3d83ee20afda16ad0133ba00f63c11a8d842a35 upstream.

A recent cleanup had the right idea to remove the initialization
of the error variable, but missed the actual benefit of that,
which is that we get warnings if there is a bug in it. Now
we get a warning about a bug that was introduced by this cleanup:

drivers/media/platform/davinci/vpfe_capture.c: In function 'vpfe_probe':
drivers/media/platform/davinci/vpfe_capture.c:1992:9: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This adds the missing initialization that the warning is about,
and another one that was preexisting and that we did not get
a warning for. That second bug has existed since the driver
was first added.

Fixes: efb74461f5a6 ("[media] DaVinci-VPFE-Capture: Delete an unnecessary variable initialisation in vpfe_probe()")
Fixes: 7da8a6cb3e5b ("V4L/DVB (12248): v4l: vpfe capture bridge driver for DM355 and DM6446")

[ fix a merge conflict]
Signed-off-by: Arnd Bergmann <>
Signed-off-by: Mauro Carvalho Chehab <>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <>
6 years agodm crypt: mark key as invalid until properly loaded
Ondrej Kozina [Wed, 2 Nov 2016 14:02:08 +0000 (15:02 +0100)]
dm crypt: mark key as invalid until properly loaded

commit 265e9098bac02bc5e36cda21fdbad34cb5b2f48d upstream.

In crypt_set_key(), if a failure occurs while replacing the old key
(e.g. tfm->setkey() fails) the key must not have DM_CRYPT_KEY_VALID flag
set.  Otherwise, the crypto layer would have an invalid key that still
has DM_CRYPT_KEY_VALID flag set.

Signed-off-by: Ondrej Kozina <>
Reviewed-by: Mikulas Patocka <>
Signed-off-by: Mike Snitzer <>
Signed-off-by: Ben Hutchings <>
6 years agoext4: add sanity checking to count_overhead()
Theodore Ts'o [Fri, 18 Nov 2016 18:37:47 +0000 (13:37 -0500)]
ext4: add sanity checking to count_overhead()

commit c48ae41bafe31e9a66d8be2ced4e42a6b57fa814 upstream.

The commit "ext4: sanity check the block and cluster size at mount
time" should prevent any problems, but in case the superblock is
modified while the file system is mounted, add an extra safety check
to make sure we won't overrun the allocated buffer.

Signed-off-by: Theodore Ts'o <>
Signed-off-by: Ben Hutchings <>
6 years agoext4: use more strict checks for inodes_per_block on mount
Theodore Ts'o [Fri, 18 Nov 2016 18:28:30 +0000 (13:28 -0500)]
ext4: use more strict checks for inodes_per_block on mount

commit cd6bb35bf7f6d7d922509bf50265383a0ceabe96 upstream.

Centralize the checks for inodes_per_block and be more strict to make
sure the inodes_per_block_group can't end up being zero.

Signed-off-by: Theodore Ts'o <>
Reviewed-by: Andreas Dilger <>
Signed-off-by: Ben Hutchings <>
6 years agoext4: fix in-superblock mount options processing
Theodore Ts'o [Fri, 18 Nov 2016 18:24:26 +0000 (13:24 -0500)]
ext4: fix in-superblock mount options processing

commit 5aee0f8a3f42c94c5012f1673420aee96315925a upstream.

Fix a large number of problems with how we handle mount options in the
superblock.  For one, if the string in the superblock is long enough
that it is not null terminated, we could run off the end of the string
and try to interpret superblocks fields as characters.  It's unlikely
this will cause a security problem, but it could result in an invalid
parse.  Also, parse_options is destructive to the string, so in some
cases if there is a comma-separated string, it would be modified in
the superblock.  (Fortunately it only happens on file systems with a
1k block size.)

Signed-off-by: Theodore Ts'o <>
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings <>
6 years agossb: Fix error routine when fallback SPROM fails
Larry Finger [Sat, 5 Nov 2016 19:08:57 +0000 (14:08 -0500)]
ssb: Fix error routine when fallback SPROM fails

commit 8052d7245b6089992343c80b38b14dbbd8354651 upstream.

When there is a CRC error in the SPROM read from the device, the code
attempts to handle a fallback SPROM. When this also fails, the driver
returns zero rather than an error code.

Signed-off-by: Larry Finger <>
Signed-off-by: Kalle Valo <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
6 years agoscsi: mvsas: fix command_active typo
Arnd Bergmann [Wed, 16 Nov 2016 15:08:34 +0000 (16:08 +0100)]
scsi: mvsas: fix command_active typo

commit af15769ffab13d777e55fdef09d0762bf0c249c4 upstream.

gcc-7 notices that the condition in mvs_94xx_command_active looks

drivers/scsi/mvsas/mv_94xx.c: In function 'mvs_94xx_command_active':
drivers/scsi/mvsas/mv_94xx.c:671:15: error: '<<' in boolean context, did you mean '<' ? [-Werror=int-in-bool-context]

This was introduced when the mv_printk() statement got added, and leads
to the condition being ignored. This is probably harmless.

Changing '&&' to '&' makes the code look reasonable, as we check the
command bit before setting and printing it.

Fixes: a4632aae8b66 ("[SCSI] mvsas: Add new macros and functions")
Signed-off-by: Arnd Bergmann <>
Reviewed-by: Johannes Thumshirn <>
Signed-off-by: Martin K. Petersen <>
Signed-off-by: Ben Hutchings <>
6 years agoIB/mlx4: Put non zero value in max_ah device attribute
Maor Gottlieb [Thu, 10 Nov 2016 09:30:58 +0000 (11:30 +0200)]
IB/mlx4: Put non zero value in max_ah device attribute

commit 731e0415b4af3a133d0316e4dc8ef0ea57dc3fdf upstream.

Use INT_MAX since this is the max value the attribute can hold, though
hardware capability is unlimited.

Fixes: 225c7b1feef1 ('IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters')
Signed-off-by: Maor Gottlieb <>
Signed-off-by: Daniel Jurgens <>
Reviewed-by: Mark Bloch <>
Reviewed-by: Yuval Shaia <>
Signed-off-by: Leon Romanovsky <>
Signed-off-by: Doug Ledford <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
6 years agoext4: fix stack memory corruption with 64k block size
Chandan Rajendra [Tue, 15 Nov 2016 02:26:26 +0000 (21:26 -0500)]
ext4: fix stack memory corruption with 64k block size

commit 30a9d7afe70ed6bd9191d3000e2ef1a34fb58493 upstream.

The number of 'counters' elements needed in 'struct sg' is
super_block->s_blocksize_bits + 2. Presently we have 16 'counters'
elements in the array. This is insufficient for block sizes >= 32k. In
such cases the memcpy operation performed in ext4_mb_seq_groups_show()
would cause stack memory corruption.

Fixes: c9de560ded61f
Signed-off-by: Chandan Rajendra <>
Signed-off-by: Theodore Ts'o <>
Reviewed-by: Jan Kara <>
Signed-off-by: Ben Hutchings <>
6 years agoext4: fix mballoc breakage with 64k block size
Chandan Rajendra [Tue, 15 Nov 2016 02:04:37 +0000 (21:04 -0500)]
ext4: fix mballoc breakage with 64k block size

commit 69e43e8cc971a79dd1ee5d4343d8e63f82725123 upstream.

'border' variable is set to a value of 2 times the block size of the
underlying filesystem. With 64k block size, the resulting value won't
fit into a 16-bit variable. Hence this commit changes the data type of
'border' to 'unsigned int'.

Fixes: c9de560ded61f
Signed-off-by: Chandan Rajendra <>
Signed-off-by: Theodore Ts'o <>
Reviewed-by: Andreas Dilger <>
Signed-off-by: Ben Hutchings <>
6 years agousb: xhci-mem: use passed in GFP flags instead of GFP_KERNEL
Dan Carpenter [Thu, 10 Nov 2016 19:33:17 +0000 (22:33 +0300)]
usb: xhci-mem: use passed in GFP flags instead of GFP_KERNEL

commit c95a9f83711bf53faeb4ed9bbb63a3f065613dfb upstream.

We normally use the passed in gfp flags for allocations, it's just these
two which were missed.

Fixes: 22d45f01a836 ("usb/xhci: replace pci_*_consistent() with dma_*_coherent()")
Cc: Mathias Nyman <>
Signed-off-by: Dan Carpenter <>
Acked-by: Sebastian Andrzej Siewior <>
Signed-off-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
6 years agopowerpc/pci/rpadlpar: Fix device reference leaks
Johan Hovold [Tue, 1 Nov 2016 15:26:03 +0000 (16:26 +0100)]
powerpc/pci/rpadlpar: Fix device reference leaks

commit 99e5cde5eae78bef95bfe7c16ccda87fb070149b upstream.

Make sure to drop any device reference taken by vio_find_node() when
adding and removing virtual I/O slots.

Fixes: 5eeb8c63a38f ("[PATCH] PCI Hotplug: rpaphp: Move VIO registration")
Signed-off-by: Johan Hovold <>
Signed-off-by: Michael Ellerman <>
Signed-off-by: Ben Hutchings <>
6 years agopowerpc/ibmebus: Fix further device reference leaks
Johan Hovold [Tue, 1 Nov 2016 15:26:01 +0000 (16:26 +0100)]
powerpc/ibmebus: Fix further device reference leaks

commit 815a7141c4d1b11610dccb7fcbb38633759824f2 upstream.

Make sure to drop any reference taken by bus_find_device() when creating
devices during init and driver registration.

Fixes: 55347cc9962f ("[POWERPC] ibmebus: Add device creation and bus probing based on of_device")
Signed-off-by: Johan Hovold <>
Signed-off-by: Michael Ellerman <>
Signed-off-by: Ben Hutchings <>
6 years agopowerpc/ibmebus: Fix device reference leaks in sysfs interface
Johan Hovold [Tue, 1 Nov 2016 15:26:00 +0000 (16:26 +0100)]
powerpc/ibmebus: Fix device reference leaks in sysfs interface

commit fe0f3168169f7c34c29b0cf0c489f126a7f29643 upstream.

Make sure to drop any reference taken by bus_find_device() in the sysfs
callbacks that are used to create and destroy devices based on
device-tree entries.

Fixes: 6bccf755ff53 ("[POWERPC] ibmebus: dynamic addition/removal of adapters, some code cleanup")
Signed-off-by: Johan Hovold <>
Signed-off-by: Michael Ellerman <>
Signed-off-by: Ben Hutchings <>
6 years agocrypto: caam - fix AEAD givenc descriptors
Alex Porosanu [Wed, 9 Nov 2016 08:46:11 +0000 (10:46 +0200)]
crypto: caam - fix AEAD givenc descriptors

commit d128af17876d79b87edf048303f98b35f6a53dbc upstream.

The AEAD givenc descriptor relies on moving the IV through the
output FIFO and then back to the CTX2 for authentication. The
SEQ FIFO STORE could be scheduled before the data can be
read from OFIFO, especially since the SEQ FIFO LOAD needs
to wait for the SEQ FIFO LOAD SKIP to finish first. The
SKIP takes more time when the input is SG than when it's
a contiguous buffer. If the SEQ FIFO LOAD is not scheduled
before the STORE, the DECO will hang waiting for data
to be available in the OFIFO so it can be transferred to C2.
In order to overcome this, first force transfer of IV to C2
by starting the "cryptlen" transfer first and then starting to
store data from OFIFO to the output buffer.

Fixes: 1acebad3d8db8 ("crypto: caam - faster aead implementation")
Signed-off-by: Alex Porosanu <>
Signed-off-by: Horia Geantă <>
Signed-off-by: Herbert Xu <>
Signed-off-by: Ben Hutchings <>
6 years agoUSB: UHCI: report non-PME wakeup signalling for Intel hardware
Alan Stern [Fri, 21 Oct 2016 20:49:07 +0000 (16:49 -0400)]
USB: UHCI: report non-PME wakeup signalling for Intel hardware

commit ccdb6be9ec6580ef69f68949ebe26e0fb58a6fb0 upstream.

The UHCI controllers in Intel chipsets rely on a platform-specific non-PME
mechanism for wakeup signalling.  They can generate wakeup signals even
though they don't support PME.

We need to let the USB core know this so that it will enable runtime
suspend for UHCI controllers.

Signed-off-by: Alan Stern <>
Signed-off-by: Bjorn Helgaas <>
Acked-by: Greg Kroah-Hartman <>
Signed-off-by: Ben Hutchings <>
6 years agoPCI: Check for PME in targeted sleep state
Alan Stern [Fri, 21 Oct 2016 20:45:38 +0000 (16:45 -0400)]
PCI: Check for PME in targeted sleep state

commit 6496ebd7edf446fccf8266a1a70ffcb64252593e upstream.

One some systems, the firmware does not allow certain PCI devices to be put
in deep D-states.  This can cause problems for wakeup signalling, if the
device does not support PME# in the deepest allowed suspend state.  For
example, Pierre reports that on his system, ACPI does not permit his xHCI
host controller to go into D3 during runtime suspend -- but D3 is the only
state in which the controller can generate PME# signals.  As a result, the
controller goes into runtime suspend but never wakes up, so it doesn't work
properly.  USB devices plugged into the controller are never detected.

If the device relies on PME# for wakeup signals but is not capable of
generating PME# in the target state, the PCI core should accurately report
that it cannot do wakeup from runtime suspend.  This patch modifies the
pci_dev_run_wake() routine to add this check.

Reported-by: Pierre de Villemereuil <>
Tested-by: Pierre de Villemereuil <>
Signed-off-by: Alan Stern <>
Signed-off-by: Bjorn Helgaas <>
Acked-by: Rafael J. Wysocki <>
CC: Lukas Wunner <>
Signed-off-by: Ben Hutchings <>
6 years agoxfs: fix up xfs_swap_extent_forks inline extent handling
Eric Sandeen [Tue, 8 Nov 2016 01:55:18 +0000 (12:55 +1100)]
xfs: fix up xfs_swap_extent_forks inline extent handling

commit 4dfce57db6354603641132fac3c887614e3ebe81 upstream.

There have been several reports over the years of NULL pointer
dereferences in xfs_trans_log_inode during xfs_fsr processes,
when the process is doing an fput and tearing down extents
on the temporary inode, something like:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
PID: 29439  TASK: ffff880550584fa0  CPU: 6   COMMAND: "xfs_fsr"
    [exception RIP: xfs_trans_log_inode+0x10]
 #9 [ffff8800a57bbbe0] xfs_bunmapi at ffffffffa037398e [xfs]
#10 [ffff8800a57bbce8] xfs_itruncate_extents at ffffffffa0391b29 [xfs]
#11 [ffff8800a57bbd88] xfs_inactive_truncate at ffffffffa0391d0c [xfs]
#12 [ffff8800a57bbdb8] xfs_inactive at ffffffffa0392508 [xfs]
#13 [ffff8800a57bbdd8] xfs_fs_evict_inode at ffffffffa035907e [xfs]
#14 [ffff8800a57bbe00] evict at ffffffff811e1b67
#15 [ffff8800a57bbe28] iput at ffffffff811e23a5
#16 [ffff8800a57bbe58] dentry_kill at ffffffff811dcfc8
#17 [ffff8800a57bbe88] dput at ffffffff811dd06c
#18 [ffff8800a57bbea8] __fput at ffffffff811c823b
#19 [ffff8800a57bbef0] ____fput at ffffffff811c846e
#20 [ffff8800a57bbf00] task_work_run at ffffffff81093b27
#21 [ffff8800a57bbf30] do_notify_resume at ffffffff81013b0c
#22 [ffff8800a57bbf50] int_signal at ffffffff8161405d

As it turns out, this is because the i_itemp pointer, along
with the d_ops pointer, has been overwritten with zeros
when we tear down the extents during truncate.  When the in-core
inode fork on the temporary inode used by xfs_fsr was originally
set up during the extent swap, we mistakenly looked at di_nextents
to determine whether all extents fit inline, but this misses extents
generated by speculative preallocation; we should be using if_bytes

This mistake corrupts the in-memory inode, and code in
xfs_iext_remove_inline eventually gets bad inputs, causing
it to memmove and memset incorrect ranges; this became apparent
because the two values in ifp->if_u2.if_inline_ext[1] contained
what should have been in d_ops and i_itemp; they were memmoved due
to incorrect array indexing and then the original locations
were zeroed with memset, again due to an array overrun.

Fix this by properly using i_df.if_bytes to determine the number
of extents, not di_nextents.

Thanks to dchinner for looking at this with me and spotting the
root cause.

Signed-off-by: Eric Sandeen <>
Reviewed-by: Brian Foster <>
Signed-off-by: Dave Chinner <>
[bwh: Backported to 3.2: adjust filename, indentation]
Signed-off-by: Ben Hutchings <>
6 years agocris: Only build flash rescue image if CONFIG_ETRAX_AXISFLASHMAP is selected
Guenter Roeck [Sun, 30 Oct 2016 16:09:18 +0000 (09:09 -0700)]
cris: Only build flash rescue image if CONFIG_ETRAX_AXISFLASHMAP is selected

commit 328cf6927bb72cadefddebbc9a23c793108147a2 upstream.

If CONFIG_ETRAX_AXISFLASHMAP is not configured, the flash rescue image
object file is empty. With recent versions of binutils, this results
in the following build error.

cris-linux-objcopy: error:
the input file 'arch/cris/boot/rescue/rescue.o' has no sections

This is seen, for example, when trying to build cris:allnoconfig
with recently generated toolchains.

Since it does not make sense to build a flash rescue image if there is
no flash, only build it if CONFIG_ETRAX_AXISFLASHMAP is enabled.

Reported-by: kbuild test robot <>
Fixes: 66ab3a74c5ce ("CRIS: Merge machine dependent boot/compressed ..")
Signed-off-by: Guenter Roeck <>
Signed-off-by: Jesper Nilsson <>
Signed-off-by: Ben Hutchings <>
6 years agodrm/gma500: Add compat ioctl
Patrik Jakobsson [Tue, 1 Nov 2016 14:43:15 +0000 (15:43 +0100)]
drm/gma500: Add compat ioctl

commit 0a97c81a9717431e6c57ea845b59c3c345edce67 upstream.

Hook up drm_compat_ioctl to support 32-bit userspace on 64-bit kernels.
It turns out that N2600 and N2800 comes with 64-bit enabled. We
previously assumed there where no such systems out there.

Signed-off-by: Patrik Jakobsson <>
Signed-off-by: Sean Paul <>
[bwh: Backported to 3.2: adjust filename, indentation]
Signed-off-by: Ben Hutchings <>
6 years agousb: gadget: composite: correctly initialize ep->maxpacket
Felipe Balbi [Wed, 28 Sep 2016 07:38:11 +0000 (10:38 +0300)]
usb: gadget: composite: correctly initialize ep->maxpacket

commit e8f29bb719b47a234f33b0af62974d7a9521a52c upstream.

usb_endpoint_maxp() returns wMaxPacketSize in its
raw form. Without taking into consideration that it
also contains other bits reserved for isochronous

This patch fixes one occasion where this is a
problem by making sure that we initialize
ep->maxpacket only with lower 10 bits of the value
returned by usb_endpoint_maxp(). Note that seperate
patches will be necessary to audit all call sites of
usb_endpoint_maxp() and make sure that
usb_endpoint_maxp() only returns lower 10 bits of

Signed-off-by: Felipe Balbi <>
Signed-off-by: Ben Hutchings <>
6 years agoperf scripting: Avoid leaking the scripting_context variable
Arnaldo Carvalho de Melo [Tue, 25 Oct 2016 20:20:47 +0000 (17:20 -0300)]
perf scripting: Avoid leaking the scripting_context variable

commit cf346d5bd4b9d61656df2f72565c9b354ef3ca0d upstream.

Both register_perl_scripting() and register_python_scripting() allocate
this variable, fix it by checking if it already was.

Cc: Adrian Hunter <>
Cc: David Ahern <>
Cc: Frederic Weisbecker <>
Cc: Jiri Olsa <>
Cc: Namhyung Kim <>
Cc: Tom Zanussi <>
Cc: Wang Nan <>
Fixes: 7e4b21b84c43 ("perf/scripts: Add Python scripting engine")
Signed-off-by: Arnaldo Carvalho de Melo <>
Signed-off-by: Ben Hutchings <>
6 years agoite-cir: initialize use_demodulator before using it
Nicolas Iooss [Sat, 10 Sep 2016 16:59:49 +0000 (13:59 -0300)]
ite-cir: initialize use_demodulator before using it

commit 7ec03e60ef81c19b5d3a46dd070ee966774b860f upstream.

Function ite_set_carrier_params() uses variable use_demodulator after
having initialized it to false in some if branches, but this variable is
never set to true otherwise.

This bug has been found using clang -Wsometimes-uninitialized warning

Fixes: 620a32bba4a2 ("[media] rc: New rc-based ite-cir driver for
several ITE CIRs")

Signed-off-by: Nicolas Iooss <>
Signed-off-by: Mauro Carvalho Chehab <>
Signed-off-by: Ben Hutchings <>
6 years agonet/sched: em_meta: Fix 'meta vlan' to correctly recognize zero VID frames
Shmulik Ladkani [Thu, 20 Oct 2016 21:18:08 +0000 (00:18 +0300)]
net/sched: em_meta: Fix 'meta vlan' to correctly recognize zero VID frames

commit d65f2fa680d6f91438461df54c83a331b3a631c9 upstream.

META_COLLECTOR int_vlan_tag() assumes that if the accel tag (vlan_tci)
is zero, then no vlan accel tag is present.

This is incorrect for zero VID vlan accel packets, making the following
match fail:
  tc filter add ... basic match 'meta(vlan mask 0xfff eq 0)' ...

Apparently 'int_vlan_tag' was implemented prior VLAN_TAG_PRESENT was
introduced in 05423b2 "vlan: allow null VLAN ID to be used"
(and at time introduced, the 'vlan_tx_tag_get' call in em_meta was not

Fix, testing skb_vlan_tag_present instead of testing skb_vlan_tag_get's

Fixes: 05423b2413 ("vlan: allow null VLAN ID to be used")
Fixes: 1a31f2042e ("netsched: Allow meta match on vlan tag on receive")

Signed-off-by: Shmulik Ladkani <>
Cc: Eric Dumazet <>
Cc: Stephen Hemminger <>
Signed-off-by: David S. Miller <>
[bwh: Backported to 3.2: s/skb_vlan_tag/vlan_tx_tag/]
Signed-off-by: Ben Hutchings <>
6 years agostaging: iio: ad7606: fix improper setting of oversampling pins
Eva Rachel Retuya [Sat, 8 Oct 2016 16:05:39 +0000 (00:05 +0800)]
staging: iio: ad7606: fix improper setting of oversampling pins

commit b321a38d2407c7e425c54bc09be909a34e49f740 upstream.

The oversampling ratio is controlled using the oversampling pins,
OS [2:0] with OS2 being the MSB control bit, and OS0 the LSB control

The gpio connected to the OS2 pin is not being set correctly, only OS0
and OS1 pins are being set. Fix the typo to allow proper control of the
oversampling pins.

Signed-off-by: Eva Rachel Retuya <>
Fixes: b9618c0 ("staging: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4")
Acked-by: Lars-Peter Clausen <>
Signed-off-by: Jonathan Cameron <>
Signed-off-by: Ben Hutchings <>
6 years agoLinux 3.2.86 v3.2.86
Ben Hutchings [Sun, 26 Feb 2017 20:01:33 +0000 (20:01 +0000)]
Linux 3.2.86

6 years agotcp: avoid infinite loop in tcp_splice_read()
Eric Dumazet [Fri, 3 Feb 2017 22:59:38 +0000 (14:59 -0800)]
tcp: avoid infinite loop in tcp_splice_read()

commit ccf7abb93af09ad0868ae9033d1ca8108bdaec82 upstream.

Splicing from TCP socket is vulnerable when a packet with URG flag is
received and stored into receive queue.

__tcp_splice_read() returns 0, and sk_wait_data() immediately
returns since there is the problematic skb in queue.

This is a nice way to burn cpu (aka infinite loop) and trigger
soft lockups.

Again, this gem was found by syzkaller tool.

Fixes: 9c55e01c0cc8 ("[TCP]: Splice receive support.")
Signed-off-by: Eric Dumazet <>
Reported-by: Dmitry Vyukov <>
Cc: Willy Tarreau <>
Signed-off-by: David S. Miller <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
6 years agodccp: fix freeing skb too early for IPV6_RECVPKTINFO
Andrey Konovalov [Thu, 16 Feb 2017 16:22:46 +0000 (17:22 +0100)]
dccp: fix freeing skb too early for IPV6_RECVPKTINFO

commit 5edabca9d4cff7f1f2b68f0bac55ef99d9798ba4 upstream.

In the current DCCP implementation an skb for a DCCP_PKT_REQUEST packet
is forcibly freed via __kfree_skb in dccp_rcv_state_process if
dccp_v6_conn_request successfully returns.

However, if IPV6_RECVPKTINFO is set on a socket, the address of the skb
is saved to ireq->pktopts and the ref count for skb is incremented in
dccp_v6_conn_request, so skb is still in use. Nevertheless, it gets freed
in dccp_rcv_state_process.

Fix by calling consume_skb instead of doing goto discard and therefore
calling __kfree_skb.

Similar fixes for TCP:

fb7e2399ec17f1004c0e0ccfd17439f8759ede01 [TCP]: skb is unexpectedly freed.
0aea76d35c9651d55bbaf746e7914e5f9ae5a25d tcp: SYN packets are now
simply consumed

Signed-off-by: Andrey Konovalov <>
Acked-by: Eric Dumazet <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
6 years agoUSB: serial: kl5kusb105: fix line-state error handling
Johan Hovold [Tue, 10 Jan 2017 11:05:37 +0000 (12:05 +0100)]
USB: serial: kl5kusb105: fix line-state error handling

commit 146cc8a17a3b4996f6805ee5c080e7101277c410 upstream.

The current implementation failed to detect short transfers when
attempting to read the line state, and also, to make things worse,
logged the content of the uninitialised heap transfer buffer.

Fixes: abf492e7b3ae ("USB: kl5kusb105: fix DMA buffers on stack")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <>
Signed-off-by: Johan Hovold <>
Signed-off-by: Ben Hutchings <>
6 years agokvm: nVMX: Allow L1 to intercept software exceptions (#BP and #OF)
Jim Mattson [Mon, 12 Dec 2016 19:01:37 +0000 (11:01 -0800)]
kvm: nVMX: Allow L1 to intercept software exceptions (#BP and #OF)

commit ef85b67385436ddc1998f45f1d6a210f935b3388 upstream.

When L2 exits to L0 due to "exception or NMI", software exceptions
(#BP and #OF) for which L1 has requested an intercept should be
handled by L1 rather than L0. Previously, only hardware exceptions
were forwarded to L1.

Signed-off-by: Jim Mattson <>
Signed-off-by: Paolo Bonzini <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
6 years agoLinux 3.2.85 v3.2.85
Ben Hutchings [Thu, 23 Feb 2017 03:51:07 +0000 (03:51 +0000)]
Linux 3.2.85

6 years agoALSA: pcm : Call kill_fasync() in stream lock
Takashi Iwai [Thu, 14 Apr 2016 16:02:37 +0000 (18:02 +0200)]
ALSA: pcm : Call kill_fasync() in stream lock

commit 3aa02cb664c5fb1042958c8d1aa8c35055a2ebc4 upstream.

Currently kill_fasync() is called outside the stream lock in
snd_pcm_period_elapsed().  This is potentially racy, since the stream
may get released even during the irq handler is running.  Although
snd_pcm_release_substream() calls snd_pcm_drop(), this doesn't
guarantee that the irq handler finishes, thus the kill_fasync() call
outside the stream spin lock may be invoked after the substream is
detached, as recently reported by KASAN.

As a quick workaround, move kill_fasync() call inside the stream
lock.  The fasync is rarely used interface, so this shouldn't have a
big impact from the performance POV.

Ideally, we should implement some sync mechanism for the proper finish
of stream and irq handler.  But this oneliner should suffice for most
cases, so far.

Reported-by: Baozeng Ding <>
Signed-off-by: Takashi Iwai <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
6 years agonet: avoid signed overflows for SO_{SND|RCV}BUFFORCE
Eric Dumazet [Fri, 2 Dec 2016 17:44:53 +0000 (09:44 -0800)]
net: avoid signed overflows for SO_{SND|RCV}BUFFORCE

commit b98b0bc8c431e3ceb4b26b0dfc8db509518fb290 upstream.

CAP_NET_ADMIN users should not be allowed to set negative
sk_sndbuf or sk_rcvbuf values, as it can lead to various memory
corruptions, crashes, OOM...

Note that before commit 82981930125a ("net: cleanups in
sock_setsockopt()"), the bug was even more serious, since SO_SNDBUF
and SO_RCVBUF were vulnerable.

This needs to be backported to all known linux kernels.

Again, many thanks to syzkaller team for discovering this gem.

Signed-off-by: Eric Dumazet <>
Reported-by: Andrey Konovalov <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
6 years agosg_write()/bsg_write() is not fit to be called under KERNEL_DS
Al Viro [Fri, 16 Dec 2016 18:42:06 +0000 (13:42 -0500)]
sg_write()/bsg_write() is not fit to be called under KERNEL_DS

commit a0ac402cfcdc904f9772e1762b3fda112dcc56a0 upstream.

Both damn things interpret userland pointers embedded into the payload;
worse, they are actually traversing those.  Leaving aside the bad
API design, this is very much _not_ safe to call with KERNEL_DS.
Bail out early if that happens.

Signed-off-by: Al Viro <>
Signed-off-by: Ben Hutchings <>
6 years agosctp: validate chunk len before actually using it
Marcelo Ricardo Leitner [Tue, 25 Oct 2016 16:27:39 +0000 (14:27 -0200)]
sctp: validate chunk len before actually using it

commit bf911e985d6bbaa328c20c3e05f4eb03de11fdd6 upstream.

Andrey Konovalov reported that KASAN detected that SCTP was using a slab
beyond the boundaries. It was caused because when handling out of the
blue packets in function sctp_sf_ootb() it was checking the chunk len
only after already processing the first chunk, validating only for the
2nd and subsequent ones.

The fix is to just move the check upwards so it's also validated for the
1st chunk.

Reported-by: Andrey Konovalov <>
Tested-by: Andrey Konovalov <>
Signed-off-by: Marcelo Ricardo Leitner <>
Reviewed-by: Xin Long <>
Acked-by: Neil Horman <>
Signed-off-by: David S. Miller <>
[bwh: Backported to 3.2: moved code is slightly different]
Signed-off-by: Ben Hutchings <>
6 years agoFix potential infoleak in older kernels
Linus Torvalds [Tue, 8 Nov 2016 10:17:00 +0000 (11:17 +0100)]
Fix potential infoleak in older kernels

Not upstream as it is not needed there.

So a patch something like this might be a safe way to fix the
potential infoleak in older kernels.

THIS IS UNTESTED. It's a very obvious patch, though, so if it compiles
it probably works. It just initializes the output variable with 0 in
the inline asm description, instead of doing it in the exception

It will generate slightly worse code (a few unnecessary ALU
operations), but it doesn't have any interactions with the exception
handler implementation.

Signed-off-by: Greg Kroah-Hartman <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
6 years agotcp: take care of truncations done by sk_filter()
Eric Dumazet [Thu, 10 Nov 2016 21:12:35 +0000 (13:12 -0800)]
tcp: take care of truncations done by sk_filter()

commit ac6e780070e30e4c35bd395acfe9191e6268bdd3 upstream.

With syzkaller help, Marco Grassi found a bug in TCP stack,
crashing in tcp_collapse()

Root cause is that sk_filter() can truncate the incoming skb,
but TCP stack was not really expecting this to happen.
It probably was expecting a simple DROP or ACCEPT behavior.

We first need to make sure no part of TCP header could be removed.
Then we need to adjust TCP_SKB_CB(skb)->end_seq

Many thanks to syzkaller team and Marco for giving us a reproducer.

Signed-off-by: Eric Dumazet <>
Reported-by: Marco Grassi <>
Reported-by: Vladis Dronov <>
Signed-off-by: David S. Miller <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
6 years agodccp: limit sk_filter trim to payload
Willem de Bruijn [Tue, 12 Jul 2016 22:18:57 +0000 (18:18 -0400)]
dccp: limit sk_filter trim to payload

commit 4f0c40d94461cfd23893a17335b2ab78ecb333c8 upstream.

Dccp verifies packet integrity, including length, at initial rcv in
dccp_invalid_packet, later pulls headers in dccp_enqueue_skb.

A call to sk_filter in-between can cause __skb_pull to wrap skb->len.
skb_copy_datagram_msg interprets this as a negative value, so
(correctly) fails with EFAULT. The negative length is reported in
ioctl SIOCINQ or possibly in a DCCP_WARN in dccp_close.

Introduce an sk_receive_skb variant that caps how small a filter
program can trim packets, and call this in dccp with the header
length. Excessively trimmed packets are now processed normally and
queued for reception as 0B payloads.

Fixes: 7c657876b63c ("[DCCP]: Initial implementation")
Signed-off-by: Willem de Bruijn <>
Acked-by: Daniel Borkmann <>
Signed-off-by: David S. Miller <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
6 years agorose: limit sk_filter trim to payload
Willem de Bruijn [Tue, 12 Jul 2016 22:18:56 +0000 (18:18 -0400)]
rose: limit sk_filter trim to payload

commit f4979fcea7fd36d8e2f556abef86f80e0d5af1ba upstream.

Sockets can have a filter program attached that drops or trims
incoming packets based on the filter program return value.

Rose requires data packets to have at least ROSE_MIN_LEN bytes. It
verifies this on arrival in rose_route_frame and unconditionally pulls
the bytes in rose_recvmsg. The filter can trim packets to below this
value in-between, causing pull to fail, leaving the partial header at
the time of skb_copy_datagram_msg.

Place a lower bound on the size to which sk_filter may trim packets
by introducing sk_filter_trim_cap and call this for rose packets.

Signed-off-by: Willem de Bruijn <>
Acked-by: Daniel Borkmann <>
Signed-off-by: David S. Miller <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
6 years agonet: Add __sock_queue_rcv_skb()
Ben Hutchings [Thu, 29 Dec 2016 03:06:54 +0000 (03:06 +0000)]
net: Add __sock_queue_rcv_skb()

Extraxcted from commit e6afc8ace6dd5cef5e812f26c72579da8806f5ac
"udp: remove headers from UDP packets before queueing".

Signed-off-by: Ben Hutchings <>
6 years agofbdev: color map copying bounds checking
Kees Cook [Tue, 24 Jan 2017 23:18:24 +0000 (15:18 -0800)]
fbdev: color map copying bounds checking

commit 2dc705a9930b4806250fbf5a76e55266e59389f2 upstream.

Copying color maps to userspace doesn't check the value of to->start,
which will cause kernel heap buffer OOB read due to signedness wraps.


Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kees Cook <>
Reported-by: Peter Pi (@heisecode) of Trend Micro
Cc: Min Chong <>
Cc: Dan Carpenter <>
Cc: Tomi Valkeinen <>
Cc: Bartlomiej Zolnierkiewicz <>
Signed-off-by: Andrew Morton <>
Signed-off-by: Linus Torvalds <>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <>
6 years agoHID: core: prevent out-of-bound readings
Benjamin Tissoires [Tue, 19 Jan 2016 11:34:58 +0000 (12:34 +0100)]
HID: core: prevent out-of-bound readings

commit 50220dead1650609206efe91f0cc116132d59b3f upstream.

Plugging a Logitech DJ receiver with KASAN activated raises a bunch of
out-of-bound readings.

The fields are allocated up to MAX_USAGE, meaning that potentially, we do
not have enough fields to fit the incoming values.
Add checks and silence KASAN.

Signed-off-by: Benjamin Tissoires <>
Signed-off-by: Jiri Kosina <>
Signed-off-by: Ben Hutchings <>
6 years agoblock: fix use-after-free in sys_ioprio_get()
Omar Sandoval [Fri, 1 Jul 2016 07:39:35 +0000 (00:39 -0700)]
block: fix use-after-free in sys_ioprio_get()

commit 8ba8682107ee2ca3347354e018865d8e1967c5f4 upstream.

get_task_ioprio() accesses the task->io_context without holding the task
lock and thus can race with exit_io_context(), leading to a
use-after-free. The reproducer below hits this within a few seconds on
my 4-core QEMU VM:

#define _GNU_SOURCE
#include <assert.h>
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/wait.h>

int main(int argc, char **argv)
pid_t pid, child;
long nproc, i;

syscall(SYS_ioprio_set, 1, 0, 0x6000);

nproc = sysconf(_SC_NPROCESSORS_ONLN);

for (i = 0; i < nproc; i++) {
pid = fork();
assert(pid != -1);
if (pid == 0) {
for (;;) {
pid = fork();
assert(pid != -1);
if (pid == 0) {
} else {
child = wait(NULL);
assert(child == pid);

pid = fork();
assert(pid != -1);
if (pid == 0) {
for (;;) {
/* ioprio_get(IOPRIO_WHO_PGRP, 0); */
syscall(SYS_ioprio_get, 2, 0);

for (;;) {
/* ioprio_get(IOPRIO_WHO_PGRP, 0); */
syscall(SYS_ioprio_get, 2, 0);

return 0;

This gets us KASAN dumps like this:

[   35.526914] ==================================================================
[   35.530009] BUG: KASAN: out-of-bounds in get_task_ioprio+0x7b/0x90 at addr ffff880066f34e6c
[   35.530009] Read of size 2 by task ioprio-gpf/363
[   35.530009] =============================================================================
[   35.530009] BUG blkdev_ioc (Not tainted): kasan: bad access detected
[   35.530009] -----------------------------------------------------------------------------

[   35.530009] Disabling lock debugging due to kernel taint
[   35.530009] INFO: Allocated in create_task_io_context+0x2b/0x370 age=0 cpu=0 pid=360
[   35.530009]  ___slab_alloc+0x55d/0x5a0
[   35.530009]  __slab_alloc.isra.20+0x2b/0x40
[   35.530009]  kmem_cache_alloc_node+0x84/0x200
[   35.530009]  create_task_io_context+0x2b/0x370
[   35.530009]  get_task_io_context+0x92/0xb0
[   35.530009]  copy_process.part.8+0x5029/0x5660
[   35.530009]  _do_fork+0x155/0x7e0
[   35.530009]  SyS_clone+0x19/0x20
[   35.530009]  do_syscall_64+0x195/0x3a0
[   35.530009]  return_from_SYSCALL_64+0x0/0x6a
[   35.530009] INFO: Freed in put_io_context+0xe7/0x120 age=0 cpu=0 pid=1060
[   35.530009]  __slab_free+0x27b/0x3d0
[   35.530009]  kmem_cache_free+0x1fb/0x220
[   35.530009]  put_io_context+0xe7/0x120
[   35.530009]  put_io_context_active+0x238/0x380
[   35.530009]  exit_io_context+0x66/0x80
[   35.530009]  do_exit+0x158e/0x2b90
[   35.530009]  do_group_exit+0xe5/0x2b0
[   35.530009]  SyS_exit_group+0x1d/0x20
[   35.530009]  entry_SYSCALL_64_fastpath+0x1a/0xa4
[   35.530009] INFO: Slab 0xffffea00019bcd00 objects=20 used=4 fp=0xffff880066f34ff0 flags=0x1fffe0000004080
[   35.530009] INFO: Object 0xffff880066f34e58 @offset=3672 fp=0x0000000000000001
[   35.530009] ==================================================================

Fix it by grabbing the task lock while we poke at the io_context.

Reported-by: Dmitry Vyukov <>
Signed-off-by: Omar Sandoval <>
Signed-off-by: Jens Axboe <>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <>
6 years agoperf/core: Fix concurrent sys_perf_event_open() vs. 'move_group' race
Peter Zijlstra [Wed, 11 Jan 2017 20:09:50 +0000 (21:09 +0100)]
perf/core: Fix concurrent sys_perf_event_open() vs. 'move_group' race

commit 321027c1fe77f892f4ea07846aeae08cefbbb290 upstream.

Di Shen reported a race between two concurrent sys_perf_event_open()
calls where both try and move the same pre-existing software group
into a hardware context.

The problem is exactly that described in commit:

  f63a8daa5812 ("perf: Fix event->ctx locking")

... where, while we wait for a ctx->mutex acquisition, the event->ctx
relation can have changed under us.

That very same commit failed to recognise sys_perf_event_context() as an
external access vector to the events and thereby didn't apply the
established locking rules correctly.

So while one sys_perf_event_open() call is stuck waiting on
mutex_lock_double(), the other (which owns said locks) moves the group
about. So by the time the former sys_perf_event_open() acquires the
locks, the context we've acquired is stale (and possibly dead).

Apply the established locking rules as per perf_event_ctx_lock_nested()
to the mutex_lock_double() for the 'move_group' case. This obviously means
we need to validate state after we acquire the locks.

Reported-by: Di Shen (Keen Lab)
Tested-by: John Dias <>
Signed-off-by: Peter Zijlstra (Intel) <>
Cc: Alexander Shishkin <>
Cc: Arnaldo Carvalho de Melo <>
Cc: Arnaldo Carvalho de Melo <>
Cc: Jiri Olsa <>
Cc: Kees Cook <>
Cc: Linus Torvalds <>
Cc: Min Chong <>
Cc: Peter Zijlstra <>
Cc: Stephane Eranian <>
Cc: Thomas Gleixner <>
Cc: Vince Weaver <>
Fixes: f63a8daa5812 ("perf: Fix event->ctx locking")
Signed-off-by: Ingo Molnar <>
[bwh: Backported to 3.2:
 - Use ACCESS_ONCE() instead of READ_ONCE()
 - Test perf_event::group_flags instead of group_caps
 - Add the err_locked cleanup block, which we didn't need before
 - Adjust context]
Signed-off-by: Ben Hutchings <>
6 years agoperf: Do not double free
Peter Zijlstra [Wed, 24 Feb 2016 17:45:41 +0000 (18:45 +0100)]
perf: Do not double free

commit 130056275ade730e7a79c110212c8815202773ee upstream.

In case of: err_file: fput(event_file), we'll end up calling
perf_release() which in turn will free the event.

Do not then free the event _again_.

Tested-by: Alexander Shishkin <>
Signed-off-by: Peter Zijlstra (Intel) <>
Reviewed-by: Alexander Shishkin <>
Cc: Arnaldo Carvalho de Melo <>
Cc: Jiri Olsa <>
Cc: Linus Torvalds <>
Cc: Peter Zijlstra <>
Cc: Thomas Gleixner <>
Signed-off-by: Ingo Molnar <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
6 years agoperf: Fix event->ctx locking
Peter Zijlstra [Fri, 23 Jan 2015 11:24:14 +0000 (12:24 +0100)]
perf: Fix event->ctx locking

commit f63a8daa5812afef4f06c962351687e1ff9ccb2b upstream.

There have been a few reported issues wrt. the lack of locking around
changing event->ctx. This patch tries to address those.

It avoids the whole rwsem thing; and while it appears to work, please
give it some thought in review.

What I did fail at is sensible runtime checks on the use of
event->ctx, the RCU use makes it very hard.

Signed-off-by: Peter Zijlstra (Intel) <>
Cc: Paul E. McKenney <>
Cc: Jiri Olsa <>
Cc: Arnaldo Carvalho de Melo <>
Cc: Linus Torvalds <>
Signed-off-by: Ingo Molnar <>
[bwh: Backported to 3.2:
 - We don't have perf_pmu_migrate_context()
 - Adjust context]
Signed-off-by: Ben Hutchings <>
6 years agolockdep: Silence warning if CONFIG_LOCKDEP isn't set
Paul Bolle [Thu, 24 Jan 2013 20:53:17 +0000 (21:53 +0100)]
lockdep: Silence warning if CONFIG_LOCKDEP isn't set

commit 5cd3f5affad2109fd1458aab3f6216f2181e26ea upstream.

Since commit c9a4962881929df7f1ef6e63e1b9da304faca4dd ("nfsd:
make client_lock per net") compiling nfs4state.o without
CONFIG_LOCKDEP set, triggers this GCC warning:

    fs/nfsd/nfs4state.c: In function ‘free_client’:
    fs/nfsd/nfs4state.c:1051:19: warning: unused variable ‘nn’ [-Wunused-variable]

The cause of that warning is that lockdep_assert_held() compiles
away if CONFIG_LOCKDEP is not set. Silence this warning by using
the argument to lockdep_assert_held() as a nop if CONFIG_LOCKDEP
is not set.

Signed-off-by: Paul Bolle <>
Cc: Peter Zijlstra <>
Cc: Stanislav Kinsbursky <>
Cc: J. Bruce Fields <>
Signed-off-by: Ingo Molnar <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
6 years agoperf: Fix perf_event_for_each() to use sibling
Michael Ellerman [Wed, 11 Apr 2012 01:54:13 +0000 (11:54 +1000)]
perf: Fix perf_event_for_each() to use sibling

commit 724b6daa13e100067c30cfc4d1ad06629609dc4e upstream.

In perf_event_for_each() we call a function on an event, and then
iterate over the siblings of the event.

However we don't call the function on the siblings, we call it
repeatedly on the original event - it seems "obvious" that we should
be calling it with sibling as the argument.

It looks like this broke in commit 75f937f24bd9 ("Fix ctx->mutex
vs counter->mutex inversion").

The only effect of the bug is that the PERF_IOC_FLAG_GROUP parameter
to the ioctls doesn't work.

Signed-off-by: Michael Ellerman <>
Signed-off-by: Peter Zijlstra <>
Signed-off-by: Ingo Molnar <>
Signed-off-by: Ben Hutchings <>
6 years agotty: Prevent ldisc drivers from re-using stale tty fields
Peter Hurley [Fri, 27 Nov 2015 19:30:21 +0000 (14:30 -0500)]
tty: Prevent ldisc drivers from re-using stale tty fields

commit dd42bf1197144ede075a9d4793123f7689e164bc upstream.

Line discipline drivers may mistakenly misuse ldisc-related fields
when initializing. For example, a failure to initialize tty->receive_room
in the N_GIGASET_M101 line discipline was recently found and fixed [1].
Now, the N_X25 line discipline has been discovered accessing the previous
line discipline's already-freed private data [2].

Harden the ldisc interface against misuse by initializing revelant
tty fields before instancing the new line discipline.

    commit fd98e9419d8d622a4de91f76b306af6aa627aa9c
    Author: Tilman Schmidt <>
    Date:   Tue Jul 14 00:37:13 2015 +0200

    isdn/gigaset: reset tty->receive_room when attaching ser_gigaset

[2] Report from Sasha Levin <>
    [  634.336761] ==================================================================
    [  634.338226] BUG: KASAN: use-after-free in x25_asy_open_tty+0x13d/0x490 at addr ffff8800a743efd0
    [  634.339558] Read of size 4 by task syzkaller_execu/8981
    [  634.340359] =============================================================================
    [  634.341598] BUG kmalloc-512 (Not tainted): kasan: bad access detected
    [  634.405018] Call Trace:
    [  634.405277] dump_stack (lib/dump_stack.c:52)
    [  634.405775] print_trailer (mm/slub.c:655)
    [  634.406361] object_err (mm/slub.c:662)
    [  634.406824] kasan_report_error (mm/kasan/report.c:138 mm/kasan/report.c:236)
    [  634.409581] __asan_report_load4_noabort (mm/kasan/report.c:279)
    [  634.411355] x25_asy_open_tty (drivers/net/wan/x25_asy.c:559 (discriminator 1))
    [  634.413997] tty_ldisc_open.isra.2 (drivers/tty/tty_ldisc.c:447)
    [  634.414549] tty_set_ldisc (drivers/tty/tty_ldisc.c:567)
    [  634.415057] tty_ioctl (drivers/tty/tty_io.c:2646 drivers/tty/tty_io.c:2879)
    [  634.423524] do_vfs_ioctl (fs/ioctl.c:43 fs/ioctl.c:607)
    [  634.427491] SyS_ioctl (fs/ioctl.c:622 fs/ioctl.c:613)
    [  634.427945] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:188)

Cc: Tilman Schmidt <>
Cc: Sasha Levin <>
Signed-off-by: Peter Hurley <>
Signed-off-by: Greg Kroah-Hartman <>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <>
6 years agoisdn/gigaset: reset tty->receive_room when attaching ser_gigaset
Tilman Schmidt [Mon, 13 Jul 2015 22:37:13 +0000 (00:37 +0200)]
isdn/gigaset: reset tty->receive_room when attaching ser_gigaset

commit fd98e9419d8d622a4de91f76b306af6aa627aa9c upstream.

Commit 79901317ce80 ("n_tty: Don't flush buffer when closing ldisc"),
first merged in kernel release 3.10, caused the following regression
in the Gigaset M101 driver:

Before that commit, when closing the N_TTY line discipline in
preparation to switching to N_GIGASET_M101, receive_room would be
reset to a non-zero value by the call to n_tty_flush_buffer() in
n_tty's close method. With the removal of that call, receive_room
might be left at zero, blocking data reception on the serial line.

The present patch fixes that regression by setting receive_room
to an appropriate value in the ldisc open method.

Fixes: 79901317ce80 ("n_tty: Don't flush buffer when closing ldisc")
Signed-off-by: Tilman Schmidt <>
Signed-off-by: David S. Miller <>
Signed-off-by: Ben Hutchings <>
6 years agoperf: Fix race in swevent hash
Peter Zijlstra [Tue, 15 Dec 2015 12:49:05 +0000 (13:49 +0100)]
perf: Fix race in swevent hash

commit 12ca6ad2e3a896256f086497a7c7406a547ee373 upstream.

There's a race on CPU unplug where we free the swevent hash array
while it can still have events on. This will result in a
use-after-free which is BAD.

Simply do not free the hash array on unplug. This leaves the thing
around and no use-after-free takes place.

When the last swevent dies, we do a for_each_possible_cpu() iteration
anyway to clean these up, at which time we'll free it, so no leakage
will occur.

Reported-by: Sasha Levin <>
Tested-by: Sasha Levin <>
Signed-off-by: Peter Zijlstra (Intel) <>
Cc: Arnaldo Carvalho de Melo <>
Cc: Frederic Weisbecker <>
Cc: Jiri Olsa <>
Cc: Linus Torvalds <>
Cc: Peter Zijlstra <>
Cc: Stephane Eranian <>
Cc: Thomas Gleixner <>
Cc: Vince Weaver <>
Signed-off-by: Ingo Molnar <>
Signed-off-by: Ben Hutchings <>
6 years agosg: Fix double-free when drives detach during SG_IO
Calvin Owens [Fri, 30 Oct 2015 23:57:00 +0000 (16:57 -0700)]
sg: Fix double-free when drives detach during SG_IO

commit f3951a3709ff50990bf3e188c27d346792103432 upstream.

In sg_common_write(), we free the block request and return -ENODEV if
the device is detached in the middle of the SG_IO ioctl().

Unfortunately, sg_finish_rem_req() also tries to free srp->rq, so we
end up freeing rq->cmd in the already free rq object, and then free
the object itself out from under the current user.

This ends up corrupting random memory via the list_head on the rq
object. The most common crash trace I saw is this:

  ------------[ cut here ]------------
  kernel BUG at block/blk-core.c:1420!
  Call Trace:
  [<ffffffff81281eab>] blk_put_request+0x5b/0x80
  [<ffffffffa0069e5b>] sg_finish_rem_req+0x6b/0x120 [sg]
  [<ffffffffa006bcb9>] sg_common_write.isra.14+0x459/0x5a0 [sg]
  [<ffffffff8125b328>] ? selinux_file_alloc_security+0x48/0x70
  [<ffffffffa006bf95>] sg_new_write.isra.17+0x195/0x2d0 [sg]
  [<ffffffffa006cef4>] sg_ioctl+0x644/0xdb0 [sg]
  [<ffffffff81170f80>] do_vfs_ioctl+0x90/0x520
  [<ffffffff81258967>] ? file_has_perm+0x97/0xb0
  [<ffffffff811714a1>] SyS_ioctl+0x91/0xb0
  [<ffffffff81602afb>] tracesys+0xdd/0xe2
    RIP [<ffffffff81281e04>] __blk_put_request+0x154/0x1a0

The solution is straightforward: just set srp->rq to NULL in the
failure branch so that sg_finish_rem_req() doesn't attempt to re-free

Additionally, since sg_rq_end_io() will never be called on the object
when this happens, we need to free memory backing ->cmd if it isn't
embedded in the object itself.

KASAN was extremely helpful in finding the root cause of this bug.

Signed-off-by: Calvin Owens <>
Acked-by: Douglas Gilbert <>
Signed-off-by: Martin K. Petersen <>
[bwh: Backported to 3.2:
 - sg_finish_rem_req() would not free srp->rq->cmd so don't do it here either
 - Adjust context]
Signed-off-by: Ben Hutchings <>
6 years agomedia: info leak in __media_device_enum_links()
Dan Carpenter [Sat, 13 Apr 2013 09:32:15 +0000 (06:32 -0300)]
media: info leak in __media_device_enum_links()

commit c88e739b1fad662240e99ecbd0bdaac871717987 upstream.

These structs have holes and reserved struct members which aren't
cleared.  I've added a memset() so we don't leak stack information.

Signed-off-by: Dan Carpenter <>
Signed-off-by: Laurent Pinchart <>
Signed-off-by: Mauro Carvalho Chehab <>
Signed-off-by: Ben Hutchings <>