pandora-kernel.git
9 years agostaging: speakup_soft: Fix reading of init string
Ben Hutchings [Sun, 16 Sep 2012 03:18:50 +0000 (04:18 +0100)]
staging: speakup_soft: Fix reading of init string

softsynth_read() reads a character at a time from the init string;
when it finds the null terminator it sets the initialized flag but
then repeats the last character.

Additionally, if the read() buffer is not big enough for the init
string, the next read() will start reading from the beginning again.
So the caller may never progress to reading anything else.

Replace the simple initialized flag with the current position in
the init string, carried over between calls.  Switch to reading
real data once this reaches the null terminator.

(This assumes that the length of the init string can't change, which
seems to be the case.  Really, the string and position belong together
in a per-file private struct.)

Tested-by: Samuel Thibault <sthibault@debian.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: silicom: fix a comparing proc_dir_entry pointer against 0
Devendra Naga [Sun, 16 Sep 2012 16:01:59 +0000 (12:01 -0400)]
staging: silicom: fix a comparing proc_dir_entry pointer against 0

we should be using the NULL macro, not 0 to compare against
a pointer value, and also remove braces around the single
if conditional after the create_proc_entry

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: ft1000: replace c99 comments with c88
Devendra Naga [Sun, 16 Sep 2012 17:49:40 +0000 (13:49 -0400)]
staging: ft1000: replace c99 comments with c88

replace some of the c99 comments to the structures with c88 comment style
no code change is done here.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agoStaging: silicom: use kstrtoint_from_user()
Dan Carpenter [Fri, 14 Sep 2012 08:11:35 +0000 (11:11 +0300)]
Staging: silicom: use kstrtoint_from_user()

The main problem with the hand rolled code was that there weren't any
range checks so you could corrupt memory by writing too much data to
the proc file.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agoStaging: silicom: add some range checks to proc functions
Dan Carpenter [Fri, 14 Sep 2012 06:56:00 +0000 (09:56 +0300)]
Staging: silicom: add some range checks to proc functions

If you tried to cat more than 255 characters (the last character is for
the terminator) to these proc files then it would corrupt kernel memory.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: mite: use module_init()/module_exit()
Ian Abbott [Fri, 14 Sep 2012 16:34:35 +0000 (17:34 +0100)]
staging: comedi: mite: use module_init()/module_exit()

Rename the standard `init_module()` and `cleanup_module()` functions and
make them static.  Use `module_init()` and `module_exit()` to mark the
renamed functions as the module init and exit functions.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: mite: remove list of devices
Ian Abbott [Fri, 14 Sep 2012 16:34:34 +0000 (17:34 +0100)]
staging: comedi: mite: remove list of devices

All the drivers that use the "mite" module now allocate a `struct
mite_struct` dynamically instead of searching the `mite_devices` list
populated during initialization of the "mite" module.

Remove the list of devices and the function that prints available NI
devices on the list (`mite_list_devices()`).  The list node and `used`
members in `struct mite_struct` are now redundant, so remove them.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_pcimio: use mite_alloc()
Ian Abbott [Fri, 14 Sep 2012 16:34:33 +0000 (17:34 +0100)]
staging: comedi: ni_pcimio: use mite_alloc()

Allocate `struct mite_device` dynamically instead of searching for
one on the `mite_devices` list constructed by the "mite" module.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_pcidio: use mite_alloc()
Ian Abbott [Fri, 14 Sep 2012 16:34:32 +0000 (17:34 +0100)]
staging: comedi: ni_pcidio: use mite_alloc()

Allocate `struct mite_device` dynamically instead of searching for
one on the `mite_devices` list constructed by the "mite" module.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_labpc: use mite_alloc()
Ian Abbott [Fri, 14 Sep 2012 16:34:31 +0000 (17:34 +0100)]
staging: comedi: ni_labpc: use mite_alloc()

Allocate `struct mite_device` dynamically instead of searching for
one on the `mite_devices` list constructed by the "mite" module.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_670x: remove spurious free_irq() call
Ian Abbott [Fri, 14 Sep 2012 16:34:30 +0000 (17:34 +0100)]
staging: comedi: ni_670x: remove spurious free_irq() call

This driver's comedi `detach` handler (`ni_670x_detach()`) calls
`free_irq()` but the driver doesn't call `request_irq()` anywhere.
Remove the spurious call.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_670x: use mite_alloc()
Ian Abbott [Fri, 14 Sep 2012 16:34:29 +0000 (17:34 +0100)]
staging: comedi: ni_670x: use mite_alloc()

Allocate `struct mite_device` dynamically instead of searching for
one on the `mite_devices` list constructed by the "mite" module.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_660x: use mite_alloc()
Ian Abbott [Fri, 14 Sep 2012 16:34:28 +0000 (17:34 +0100)]
staging: comedi: ni_660x: use mite_alloc()

Allocate `struct mite_device` dynamically instead of searching for
one on the `mite_devices` list constructed by the "mite" module.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_65xx: use mite_alloc()
Ian Abbott [Fri, 14 Sep 2012 16:34:27 +0000 (17:34 +0100)]
staging: comedi: ni_65xx: use mite_alloc()

Allocate `struct mite_device` dynamically instead of searching for
one on the `mite_devices` list constructed by the "mite" module.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_6527: use mite_alloc()
Ian Abbott [Fri, 14 Sep 2012 16:34:26 +0000 (17:34 +0100)]
staging: comedi: ni_6527: use mite_alloc()

Allocate `struct mite_device` dynamically instead of searching for
one on the `mite_devices` list constructed by the "mite" module.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: mite: add mite_alloc() and mite_free()
Ian Abbott [Fri, 14 Sep 2012 16:34:25 +0000 (17:34 +0100)]
staging: comedi: mite: add mite_alloc() and mite_free()

Add `mite_alloc()` to allow drivers to allocate and initialize a `struct
mite_struct` dynamically and export it.  Add `mite_free()`, which is
currently just an inline wrapper for `kfree()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: mite: replace printk() calls
Ian Abbott [Fri, 14 Sep 2012 16:34:24 +0000 (17:34 +0100)]
staging: comedi: mite: replace printk() calls

Replace the `printk()` calls in this module with `dev_...()` calls where
possible or `pr_...()` calls otherwise.

Rework the normally ifdefed out (by the `DEBUG_MITE` macro)
`mite_dump_regs()` to dump register offsets instead of remapped
addresses.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: mite: use ilog2()
Ian Abbott [Fri, 14 Sep 2012 16:34:23 +0000 (17:34 +0100)]
staging: comedi: mite: use ilog2()

The static inline functions `MITE_IODWBSR_1_WSIZE_bits()` and `CR_RL()`
in "mite.h" work out a base-2 logarithm using a `while` loop.  Change
them to use `ilog2()`.  Also change `CR_RL()` to clamp the maximum value
instead of printing an error.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: mite: export mite_alloc_ring() and mite_free_ring()
Ian Abbott [Fri, 14 Sep 2012 16:34:22 +0000 (17:34 +0100)]
staging: comedi: mite: export mite_alloc_ring() and mite_free_ring()

The `mite_alloc_ring()` and `mite_free_ring()` static inline functions
in "mite.h" are reasonably large.  Transfer them to "mite.c" and export
them.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: mite: make internal functions static
Ian Abbott [Fri, 14 Sep 2012 16:34:21 +0000 (17:34 +0100)]
staging: comedi: mite: make internal functions static

Declare some non-exported functions in "mite.c" `static` and remove
their declarations from "mite.h".

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_pcimio: Use comedi attach_pci callback
Ian Abbott [Fri, 14 Sep 2012 16:34:20 +0000 (17:34 +0100)]
staging: comedi: ni_pcimio: Use comedi attach_pci callback

Convert this PCI driver to use the comedi `attach_pci` callback instead
of the `attach` callback for PCI auto-configuration.  There is no need
to support manual attachment of PCI devices supported by this driver, so
remove the `attach` callback altogether.

Note that this driver still uses the list of PCI "mite" devices created
by the "mite" module.  This will be dealt with by a later patch once
dynamic allocation of "mite" structures has been implemented.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_pcimio: Add semicolon to module_comedi_pci_driver()
Ian Abbott [Fri, 14 Sep 2012 16:34:19 +0000 (17:34 +0100)]
staging: comedi: ni_pcimio: Add semicolon to module_comedi_pci_driver()

Add a semi-colon after the macro call
`module_comedi_pci_driver(ni_pcimio_driver, ni_pcimio_pci_driver)`.  It
compiles with or without the semicolon but it ought to have it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_mio_common: don't pass config options to ni_E_init()
Ian Abbott [Fri, 14 Sep 2012 16:34:18 +0000 (17:34 +0100)]
staging: comedi: ni_mio_common: don't pass config options to ni_E_init()

`ni_E_init()` doesn't use the second parameter pointing to a `struct
comedi_devconfig` passed from a comedi `attach` handler, so remove the
parameter.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_pcidio: use comedi attach_pci callback
Ian Abbott [Fri, 14 Sep 2012 16:34:17 +0000 (17:34 +0100)]
staging: comedi: ni_pcidio: use comedi attach_pci callback

Convert this PCI driver to use the comedi `attach_pci` callback instead
of the `attach` callback for PCI auto-configuration.  There is no need
to support manual attachment of PCI devices supported by this driver, so
remove the `attach` callback altogether.

Note that this driver still uses the list of PCI "mite" devices created
by the "mite" module.  This will be dealt with by a later patch once
dynamic allocation of "mite" structures has been implemented.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_pcidio: use request_firmware()
Ian Abbott [Fri, 14 Sep 2012 16:34:16 +0000 (17:34 +0100)]
staging: comedi: ni_pcidio: use request_firmware()

The PCI-6534 needs three firmware files loading to work with the driver.
That is currently done by passing the firmware data using the
`COMEDI_DEVCONFIG` ioctl that uses the comedi `attach()` hook in the
driver.  This doesn't work for auto-configured PCI devices (which also
currently use the `attach()` hook in this driver, but doesn't have the
firmware-loading options set in the `struct comedi_devconfig *`
parameter).

Change the driver to request the firmware files using
`request_firmware()`, ignoring any firmware-loading options set in the
`struct comedi_devconfig`.

The PCI-6534 has a main FPGA which needs to be loaded first, and two
"scarabs".  Scarab A is loaded with firmware to support digital input
mode, and scarab B is loaded with firmware to support digital output
mode.

I don't think the order of loading the scarab firmwares matters as long
as they are loaded with the correct firmware files.  This update loads
scarab B first, whereas the original code loaded scarab A first.  The
firmware files are loaded in the following order:

A) main FPGA: "ni6534a.bin" (FW_PCI_6534_MAIN)
B) scarab B: "niscrb02.bin" (FW_PCI_6534_SCARAB_DO)
C) scarab A: "niscrb01.bin" (FW_PCI_6534_SCARAB_DI)

The required firmware files can be found in the
"comedi-nonfree-firmware" tar-ball at
<http://www.comedi.org/download/comedi-nonfree-firmware-2007.06.22.tar.gz>.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_pcidio: convert printk() calls
Ian Abbott [Fri, 14 Sep 2012 16:34:15 +0000 (17:34 +0100)]
staging: comedi: ni_pcidio: convert printk() calls

Convert the `printk()` calls in this driver to use the `dev_...()` calls
where possible, or the `pr_...()` calls otherwise.  Combine
non-line-terminated prints into single-line prints.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_labpc: use comedi attach_pci callback
Ian Abbott [Fri, 14 Sep 2012 16:34:14 +0000 (17:34 +0100)]
staging: comedi: ni_labpc: use comedi attach_pci callback

Convert this PCI driver to use the comedi `attach_pci` callback instead
of the `attach` callback for PCI auto-configuration.  Remove support for
manual attachment of PCI boards supported by this driver.  The `attach`
callback is still needed to manually attach ISA boards, but print an
error if an attempt is made to manually attach a PCI board.

Note that this driver still uses the list of PCI "mite" devices created
by the "mite" module.  This will be dealt with by a later patch once
dynamic allocation of "mite" structures has been implemented.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_labpc: move labpc_driver and labpc_pci_table
Ian Abbott [Fri, 14 Sep 2012 16:34:13 +0000 (17:34 +0100)]
staging: comedi: ni_labpc: move labpc_driver and labpc_pci_table

Move the `labpc_driver` and `labpc_pci_table` variables nearer the
module initialization code near the bottom of the module for aesthetic
reasons and to avoid a forward declaration of `labpc_attach()`.

As a consequence, to avoid having to add a forward declaration of the
`labpc_driver` variable, change code that uses
`labpc_driver.driver_name` to use `DRV_NAME` instead, and change code
that uses `labpc_driver.num_names` to use `ARRAY_SIZE(labpc_boards)`
instead.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_labpc: use module_comedi_pci_driver()
Ian Abbott [Fri, 14 Sep 2012 16:34:12 +0000 (17:34 +0100)]
staging: comedi: ni_labpc: use module_comedi_pci_driver()

Use the macro `module_comedi_pci_driver(comedi_driver, pci_driver)` to
register the module as a Comedi PCI driver if the module supports PCI
devices, otherwise use `module_comedi_driver(comedi_driver)` to register
it as an ordinary Comedi driver.  Rename variables and functions that
have prefix `driver_` for consistency.  Set the `name` member of the
`struct pci_driver` variable in its initializer instead of initializing
it in the module initialization function.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_labpc: convert printk() to dev_...()
Ian Abbott [Fri, 14 Sep 2012 16:34:11 +0000 (17:34 +0100)]
staging: comedi: ni_labpc: convert printk() to dev_...()

Convert the `printk()` calls in this driver to use the `dev_...()` calls
where possible, or the `pr_...()` calls otherwise.  Remove the ifdefed
out code that prints the EEPROM contents.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_670x: use comedi attach_pci callback
Ian Abbott [Fri, 14 Sep 2012 16:34:10 +0000 (17:34 +0100)]
staging: comedi: ni_670x: use comedi attach_pci callback

Convert this PCI driver to use the comedi `attach_pci` callback instead
of the `attach` callback for PCI auto-configuration.  There is no need
to support manual attachment of PCI devices supported by this driver, so
remove the `attach` callback altogether.

Note that this driver still uses the list of PCI "mite" devices created
by the "mite" module.  This will be dealt with by a later patch once
dynamic allocation of "mite" structures has been implemented.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_660x: use comedi attach_pci callback
Ian Abbott [Fri, 14 Sep 2012 16:34:09 +0000 (17:34 +0100)]
staging: comedi: ni_660x: use comedi attach_pci callback

Convert this PCI driver to use the comedi `attach_pci` callback instead
of the `attach` callback for PCI auto-configuration.  There is no need
to support manual attachment of PCI devices supported by this driver, so
remove the `attach` callback altogether.

Note that this driver still uses the list of PCI "mite" devices created
by the "mite" module.  This will be dealt with by a later patch once
dynamic allocation of "mite" structures has been implemented.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_660x: use module_comedi_pci_driver()
Ian Abbott [Fri, 14 Sep 2012 16:34:08 +0000 (17:34 +0100)]
staging: comedi: ni_660x: use module_comedi_pci_driver()

Use the macro `module_comedi_pci_driver(comedi_driver, pci_driver)` to
register the module as a Comedi PCI driver.  Rename variables and
functions that have prefix `driver_` for consistency.  Set the `name`
member of the `struct pci_driver` variable in its initializer instead of
initializing it in the module initialization function.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_660x: convert printk() to dev_...()
Ian Abbott [Fri, 14 Sep 2012 16:34:07 +0000 (17:34 +0100)]
staging: comedi: ni_660x: convert printk() to dev_...()

Convert the `printk()` calls in this drivers to use the `dev_...()`
calls instead.  Replace some `printk()` calls in the comedi `attach()`
handler (`ni_660x_attach()`) with a single `dev_info()` at the end.
Remove some `printk()` calls before `BUG()` calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_65xx: use comedi attach_pci callback
Ian Abbott [Fri, 14 Sep 2012 16:34:06 +0000 (17:34 +0100)]
staging: comedi: ni_65xx: use comedi attach_pci callback

Convert this PCI driver to use the comedi `attach_pci` callback instead
of the `attach` callback for PCI auto-configuration.  There is no need
to support manual attachment of PCI devices supported by this driver, so
remove the `attach` callback altogether.

Note that this driver still uses the list of PCI "mite" devices created
by the "mite" module.  This will be dealt with by a later patch once
dynamic allocation of "mite" structures has been implemented.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_65xx: move ni_65xx_driver
Ian Abbott [Fri, 14 Sep 2012 16:34:05 +0000 (17:34 +0100)]
staging: comedi: ni_65xx: move ni_65xx_driver

Move the `struct comedi_driver ni_65xx_driver` variable further down the
function to be closer to the `module_comedi_pci_driver()` module call
and to avoid having to forward declare `ni_65xx_attach()` and
`ni_65xx_detach()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_65xx: use module_comedi_pci_driver()
Ian Abbott [Fri, 14 Sep 2012 16:34:04 +0000 (17:34 +0100)]
staging: comedi: ni_65xx: use module_comedi_pci_driver()

Use the macro `module_comedi_pci_driver(comedi_driver, pci_driver)` to
register the module as a Comedi PCI driver.  Rename variables and
functions that have prefix `driver_` for consistency.  Set the `name`
member of the `struct pci_driver` variable in its initializer instead of
initializing it in the module initialization function.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_65xx: convert printk() to dev_...()
Ian Abbott [Fri, 14 Sep 2012 16:34:03 +0000 (17:34 +0100)]
staging: comedi: ni_65xx: convert printk() to dev_...()

Convert the `printk()` calls in this drivers to use the `dev_...()`
calls instead.  Remove the initial `printk()` call in the comedi
`attach()` handler (`ni_65xx_attach()`) as it's a bit redundant - the
board type and contents of a board ID register are printed later in the
function.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_6527: use comedi attach_pci callback
Ian Abbott [Fri, 14 Sep 2012 16:34:02 +0000 (17:34 +0100)]
staging: comedi: ni_6527: use comedi attach_pci callback

Convert this PCI driver to use the comedi `attach_pci` callback instead
of the `attach` callback for PCI auto-configuration.  There is no need
to support manual attachment of PCI devices supported by this driver, so
remove the `attach` callback altogether.

Note that this driver still uses the list of PCI "mite" devices created
by the "mite" module.  This will be dealt with by a later patch once
dynamic allocation of "mite" structures has been implemented.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_6527: move ni6527_driver
Ian Abbott [Fri, 14 Sep 2012 16:34:01 +0000 (17:34 +0100)]
staging: comedi: ni_6527: move ni6527_driver

Move the `struct comedi_driver ni6527_driver` variable further down the
function to be closer to the `module_comedi_pci_driver()` module call
and to avoid having to forward declare `ni6527_attach()` and
`ni6527_detach()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_6527: use module_comedi_pci_driver()
Ian Abbott [Fri, 14 Sep 2012 16:34:00 +0000 (17:34 +0100)]
staging: comedi: ni_6527: use module_comedi_pci_driver()

Use the macro `module_comedi_pci_driver(comedi_driver, pci_driver)` to
register the module as a Comedi PCI driver.  Rename variables and
functions that have prefix `driver_` for consistency.  Set the `name`
member of the `struct pci_driver` variable in its initializer instead of
initializing it in the module initialization function.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_6527: change driver name string
Ian Abbott [Fri, 14 Sep 2012 16:33:59 +0000 (17:33 +0100)]
staging: comedi: ni_6527: change driver name string

Change the driver name string used in data structures, kernel messages,
etc. from "ni6527" to "ni_6527" to match the module name.  Use a macro
`DRIVER_NAME` that expands to this string literal.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: comedi: ni_6527: convert printk() to dev_...()
Ian Abbott [Fri, 14 Sep 2012 16:33:58 +0000 (17:33 +0100)]
staging: comedi: ni_6527: convert printk() to dev_...()

Convert the `printk()` calls in this drivers to use the `dev_...()`
calls instead.  Remove the initial `printk()` call in the comedi
`attach()` handler (`ni6527_attach()`) as it's a bit redundant - the
board type and contents of a board ID register are printed later in the
function.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agoMerge 3.6-rc6 into staging-next
Greg Kroah-Hartman [Mon, 17 Sep 2012 00:17:25 +0000 (17:17 -0700)]
Merge 3.6-rc6 into staging-next

This pulls in the staging tree fixes in 3.6-rc6 into our branch to resolve the
merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agoLinux 3.6-rc6 v3.6-rc6
Linus Torvalds [Sun, 16 Sep 2012 21:58:51 +0000 (14:58 -0700)]
Linux 3.6-rc6

9 years agoMerge tag 'mfd-for-linus-3.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 16 Sep 2012 20:22:21 +0000 (13:22 -0700)]
Merge tag 'mfd-for-linus-3.6-2' of git://git./linux/kernel/git/sameo/mfd-2.6

Pull mfd fixes from Samuel Ortiz:
 "This is the remaining MFD fixes for 3.6, with 5 pending fixes:

   - A tps65217 build error fix.
   - A lcp_ich regression fix caused by the MFD driver failing to
     initialize the watchdog sub device due to ACPI conflicts.
   - 2 MAX77693 interrupt handling bug fixes.
   - An MFD core fix, adding an IRQ domain argument to the MFD device
     addition API in order to prevent silent and potentially harmful
     remapping behaviour changes for drivers supporting non-DT
     platforms."

* tag 'mfd-for-linus-3.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: MAX77693: Fix NULL pointer error when initializing irqs
  mfd: MAX77693: Fix interrupt handling bug
  mfd: core: Push irqdomain mapping out into devices
  mfd: lpc_ich: Fix a 3.5 kernel regression for iTCO_wdt driver
  mfd: Move tps65217 regulator plat data handling to regulator

9 years agoMerge tag 'for-3.6-rc6' of git://gitorious.org/linux-pwm/linux-pwm
Linus Torvalds [Sun, 16 Sep 2012 20:20:43 +0000 (13:20 -0700)]
Merge tag 'for-3.6-rc6' of git://gitorious.org/linux-pwm/linux-pwm

Pull pwm fixes from Thierry Reding:
 "While this comes a bit later than I had wished, both patches are
  rather minor and touch only new drivers so I think these are still
  safe for merging."

* tag 'for-3.6-rc6' of git://gitorious.org/linux-pwm/linux-pwm:
  pwm: pwm-tiehrpwm: Fix conflicting channel period setting
  pwm: pwm-tiecap: Disable APWM mode after configure

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Linus Torvalds [Sun, 16 Sep 2012 20:00:36 +0000 (13:00 -0700)]
Merge git://git./linux/kernel/git/nab/target-pending

Pull scsi target fixes from Nicholas Bellinger:
 "Here is the current set of target-pending fixes headed for v3.6-final

  The main parts of this series include bug-fixes from Paolo Bonzini to
  address an use-after-free bug in pSCSI sense exception handling, along
  with addressing some long-standing bugs wrt the handling of zero-
  length SCSI CDB payloads also specific to pSCSI pass-through device
  backends."

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: go through normal processing for zero-length REQUEST_SENSE
  target: support zero allocation length in REQUEST SENSE
  target: support zero-size allocation lengths in transport_kmap_data_sg
  target: fail REPORT LUNS with less than 16 bytes of payload
  target: report too-small parameter lists everywhere
  target: go through normal processing for zero-length PSCSI commands
  target: fix use-after-free with PSCSI sense data
  target: simplify code around transport_get_sense_data
  target: move transport_get_sense_data
  target: Check idr_get_new return value in iscsi_login_zero_tsih_s1
  target: Fix ->data_length re-assignment bug with SCSI overflow

9 years agoMerge tag 'pm-for-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Sun, 16 Sep 2012 19:59:42 +0000 (12:59 -0700)]
Merge tag 'pm-for-3.6-rc6' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael J. Wysocki:
 "Three ACPI device power management fixes related to checking and
  setting device power states."

* tag 'pm-for-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PM: Use KERN_DEBUG when no power resources are found
  ACPI / PM: Fix resource_lock dead lock in acpi_power_on_device
  ACPI / PM: Infer parent power state from child if unknown, v2

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux...
Linus Torvalds [Sun, 16 Sep 2012 19:58:44 +0000 (12:58 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

Pull a btrfs revert from Chris Mason:
 "My for-linus branch has one revert in the new quota code.

  We're building up more fixes at etc for the next merge window, but I'm
  keeping them out unless they are bigger regressions or have a huge
  impact."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Revert "Btrfs: fix some error codes in btrfs_qgroup_inherit()"

9 years agoMerge tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Sun, 16 Sep 2012 19:57:59 +0000 (12:57 -0700)]
Merge tag 'sound-3.6' of git://git./linux/kernel/git/tiwai/sound

Pull more sound fixes from Takashi Iwai:
 "Yet more (a bunch of) small fixes that slipped from the previous pull
  request.  Most of commits are pending ASoC fixes, all of which are
  fairly trivial commits."

* tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: wm8904: correct the index
  ALSA: hda - Yet another position_fix quirk for ASUS machines
  ASoC: tegra: fix maxburst settings in dmaengine code
  ASoC: samsung dma - Don't indicate support for pause/resume.
  ASoC: mc13783: Remove mono support
  ASoC: arizona: Fix typo in 44.1kHz rates
  ASoC: spear: correct the check for NULL dma_buffer pointer
  sound: tegra_alc5632: remove HP detect GPIO inversion
  ASoC: atmel-ssc: include linux/io.h for raw io
  ASoC: dapm: Don't force card bias level to be updated
  ASoC: dapm: Make sure we update the bias level for CODECs with no op
  ASoC: am3517evm: fix error return code
  ASoC: ux500_msp_i2s: better use devm functions and fix error return code
  ASoC: imx-sgtl5000: fix error return code

9 years agoRevert "sched: Improve scalability via 'CPU buddies', which withstand random perturba...
Linus Torvalds [Sun, 16 Sep 2012 19:29:43 +0000 (12:29 -0700)]
Revert "sched: Improve scalability via 'CPU buddies', which withstand random perturbations"

This reverts commit 970e178985cadbca660feb02f4d2ee3a09f7fdda.

Nikolay Ulyanitsky reported thatthe 3.6-rc5 kernel has a 15-20%
performance drop on PostgreSQL 9.2 on his machine (running "pgbench").

Borislav Petkov was able to reproduce this, and bisected it to this
commit 970e178985ca ("sched: Improve scalability via 'CPU buddies' ...")
apparently because the new single-idle-buddy model simply doesn't find
idle CPU's to reschedule on aggressively enough.

Mike Galbraith suspects that it is likely due to the user-mode spinlocks
in PostgreSQL not reacting well to preemption, but we don't really know
the details - I'll just revert the commit for now.

There are hopefully other approaches to improve scheduler scalability
without it causing these kinds of downsides.

Reported-by: Nikolay Ulyanitsky <lystor@gmail.com>
Bisected-by: Borislav Petkov <bp@alien8.de>
Acked-by: Mike Galbraith <efault@gmx.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agomfd: MAX77693: Fix NULL pointer error when initializing irqs
Chanwoo Choi [Tue, 21 Aug 2012 06:16:23 +0000 (15:16 +0900)]
mfd: MAX77693: Fix NULL pointer error when initializing irqs

This patch initialize register map of MUIC device because mfd driver
of Maxim MAX77693 use regmap-muic instance of MUIC device when irqs of
Maxim MAX77693 is initialized before call max77693-muic probe() function.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
9 years agomfd: MAX77693: Fix interrupt handling bug
Chanwoo Choi [Tue, 21 Aug 2012 06:15:52 +0000 (15:15 +0900)]
mfd: MAX77693: Fix interrupt handling bug

This patch fix bug related to interrupt handling for MAX77693 devices.
- Unmask interrupt masking bit for charger/flash/muic to revolve
that interrupt isn't happened when external connector is attached.
- Fix wrong regmap instance when muic interrupt is happened.

This patch were discussed and confirm discussion about this patch on below url:
http://lkml.org/lkml/2012/7/16/118

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
9 years agomfd: core: Push irqdomain mapping out into devices
Mark Brown [Tue, 11 Sep 2012 07:16:36 +0000 (15:16 +0800)]
mfd: core: Push irqdomain mapping out into devices

Currently the MFD core supports remapping MFD cell interrupts using an
irqdomain but only if the MFD is being instantiated using device tree
and only if the device tree bindings use the pattern of registering IPs
in the device tree with compatible properties.  This will be actively
harmful for drivers which support non-DT platforms and use this pattern
for their DT bindings as it will mean that the core will silently change
remapping behaviour and it is also limiting for drivers which don't do
DT with this particular pattern.  There is also a potential fragility if
there are interrupts not associated with MFD cells and all the cells are
omitted from the device tree for some reason.

Instead change the code to take an IRQ domain as an optional argument,
allowing drivers to take the decision about the parent domain for their
interrupts.  The one current user of this feature is ab8500-core, it has
the domain lookup pushed out into the driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
9 years agoMerge tag 'asoc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Sat, 15 Sep 2012 06:24:42 +0000 (08:24 +0200)]
Merge tag 'asoc-3.6' of git://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for 3.6

A bigger set of updates than I'm entirely comfortable with - things
backed up a bit due to travel.  As ever the majority of these are small,
focused updates for specific drivers though there are a couple of core
changes.  There's been good exposure in -next.

The AT91 patch fixes a build break.

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes
Linus Torvalds [Sat, 15 Sep 2012 01:05:14 +0000 (18:05 -0700)]
Merge git://git./linux/kernel/git/steve/gfs2-3.0-fixes

Pull GFS2 fixes from Steven Whitehouse:
 "Here are three GFS2 fixes for the current kernel tree.  These are all
  related to the block reservation code which was added at the merge
  window.  That code will be getting an update at the forthcoming merge
  window too.  In the mean time though there are a few smaller issues
  which should be fixed.

  The first patch resolves an issue with write sizes of greater than 32
  bits with the size hinting code.  The second ensures that the
  allocation data structure is initialised when using xattrs and the
  third takes into account allocations which may have been made by other
  nodes which affect a reservation on the local node."

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
  GFS2: Take account of blockages when using reserved blocks
  GFS2: Fix missing allocation data for set/remove xattr
  GFS2: Make write size hinting code common

9 years agoMerge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86
Linus Torvalds [Sat, 15 Sep 2012 00:59:35 +0000 (17:59 -0700)]
Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86

Pull x86 platform driver updates from Matthew Garrett:
 "A few small updates for 3.6 - a trivial regression fix and a couple of
  conformance updates for the gmux driver, plus some tiny fixes for
  asus-wmi, eeepc-laptop and thinkpad_acpi."

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
  thinkpad_acpi: buffer overflow in fan_get_status()
  eeepc-laptop: fix device reference count leakage in eeepc_rfkill_hotplug()
  platform/x86: fix asus_laptop.wled_type description
  asus-laptop: HRWS/HWRS typo
  drivers-platform-x86: remove useless #ifdef CONFIG_ACPI_VIDEO
  apple-gmux: Fix port address calculation in gmux_pio_write32()
  apple-gmux: Fix index read functions
  apple-gmux: Obtain version info from indexed gmux

9 years agoMerge branch 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux
Linus Torvalds [Sat, 15 Sep 2012 00:55:57 +0000 (17:55 -0700)]
Merge branch 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux

Pull i2c embedded fixes from Wolfram Sang:
 "The last bunch of (typical) i2c-embedded driver fixes for 3.6.

  Also update the MAINTAINERS file to point to my tree since people keep
  asking where to find their patches."

* 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
  i2c: algo: pca: Fix mode selection for PCA9665
  MAINTAINERS: fix tree for current i2c-embedded development
  i2c: mxs: correctly setup speed for non devicetree
  i2c: pnx: Fix read transactions of >= 2 bytes
  i2c: pnx: Fix bit definitions

9 years agoMerge tag 'ecryptfs-3.6-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 15 Sep 2012 00:53:55 +0000 (17:53 -0700)]
Merge tag 'ecryptfs-3.6-rc6-fixes' of git://git./linux/kernel/git/tyhicks/ecryptfs

Pull ecryptfs fixes from Tyler Hicks:

 - Fixes a regression, introduced in 3.6-rc1, when a file is closed
   before its shared memory mapping is dirtied and unmapped.  The lower
   file was being released when the eCryptfs file was closed and the
   dirtied pages could not be written out.
 - Adds a call to the lower filesystem's ->flush() from
   ecryptfs_flush().
 - Fixes a regression, introduced in 2.6.39, when a file is renamed on
   top of another file.  The target file's inode was not being evicted
   and the space taken by the file was not reclaimed until eCryptfs was
   unmounted.

* tag 'ecryptfs-3.6-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  eCryptfs: Copy up attributes of the lower target inode after rename
  eCryptfs: Call lower ->flush() from ecryptfs_flush()
  eCryptfs: Write out all dirty pages just before releasing the lower file

9 years agoMerge branch 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma...
Linus Torvalds [Sat, 15 Sep 2012 00:53:11 +0000 (17:53 -0700)]
Merge branch 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping

Pull one more DMA-mapping fix from Marek Szyprowski:
 "This patch fixes very subtle bug (typical off-by-one error) which
  might appear in very rare circumstances."

* 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  arm: mm: fix DMA pool affiliation check

9 years agoMerge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck...
Linus Torvalds [Sat, 15 Sep 2012 00:52:29 +0000 (17:52 -0700)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Fix word size register read and write operations in ina2xx driver, and
  initialize uninitialized structure elements in twl4030-madc-hwmon
  driver."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ina2xx) Fix word size register read and write operations
  hwmon: (twl4030-madc-hwmon) Initialize uninitialized structure elements

9 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Sat, 15 Sep 2012 00:51:10 +0000 (17:51 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "I realise this a bit bigger than I would want at this point.

  Exynos is a large chunk, I got them to half what they wanted already,
  and hey its ARM based, so not going to hurt many people.

  Radeon has only two fixes, but the PLL fixes were a bit bigger, but
  required for a lot of scenarios, the fence fix is really urgent.

  vmwgfx: I've pulled in a dumb ioctl support patch that I was going to
  shove in later and cc stable, but we need it asap, its mainly to stop
  mesa growing a really ugly dependency in userspace to run stuff on
  vmware, and if I don't stick it in the kernel now, everyone will have
  to ship ugly userspace libs to workaround it.

  nouveau: single urgent fix found in F18 testing, causes X to not start
  properly when f18 plymouth is used

  i915: smattering of fixes and debug quieting

  gma500: single regression fix

  So as I said a bit large, but its fairly well scattered and its all
  stuff I'll be shipping in F18's 3.6 kernel."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (26 commits)
  drm/nouveau: fix booting with plymouth + dumb support
  drm/radeon: make 64bit fences more robust v3
  drm/radeon: rework pll selection (v3)
  drm: Drop the NV12M and YUV420M formats
  drm/exynos: remove DRM_FORMAT_NV12M from plane module
  drm/exynos: fix double call of drm_prime_(init/destroy)_file_private
  drm/exynos: add dummy support for dmabuf-mmap
  drm/exynos: Add missing braces around sizeof in exynos_mixer.c
  drm/exynos: Add missing braces around sizeof in exynos_hdmi.c
  drm/exynos: Make g2d_pm_ops static
  drm/exynos: Add dependency for G2D in Kconfig
  drm/exynos: fixed page align bug.
  drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1]
  drm/exynos: Use devm_* functions in exynos_drm_g2d.c file
  drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c file
  drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c file
  drm/exynos: Remove redundant check in exynos_drm_fimd.c file
  drm/exynos: Remove redundant check in exynos_hdmi.c file
  vmwgfx: add dumb ioctl support
  gma500: Fix regression on Oaktrail devices
  ...

9 years agoMerge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 15 Sep 2012 00:44:52 +0000 (17:44 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar:
 "Smaller fixlets"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix kernel-doc warnings in kernel/sched/fair.c
  sched: Unthrottle rt runqueues in __disable_runtime()
  sched: Add missing call to calc_load_exit_idle()
  sched: Fix load avg vs cpu-hotplug

9 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 15 Sep 2012 00:43:45 +0000 (17:43 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
 "This tree includes various fixes"

Ingo really needs to improve on the whole "explain git pull" part.
"Various fixes" indeed.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/hwpb: Invoke __perf_event_disable() if interrupts are already disabled
  perf/x86: Enable Intel Cedarview Atom suppport
  perf_event: Switch to internal refcount, fix race with close()
  oprofile, s390: Fix uninitialized memory access when writing to oprofilefs
  perf/x86: Fix microcode revision check for SNB-PEBS

9 years agoMerge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 15 Sep 2012 00:43:14 +0000 (17:43 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull a core sparse warning fix from Ingo Molnar

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mm/memblock: Use NULL instead of 0 for pointers

9 years agoRevert "Btrfs: fix some error codes in btrfs_qgroup_inherit()"
Chris Mason [Sat, 15 Sep 2012 00:06:30 +0000 (20:06 -0400)]
Revert "Btrfs: fix some error codes in btrfs_qgroup_inherit()"

This reverts commit 5986802c2fcc754040bb7ed95f30bb16c4a843b7.

Both paths are not error paths but regular cases where non-qgroup
subvols are involved.

Signed-off-by: Chris Mason <chris.mason@fusionio.com>
9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Fri, 14 Sep 2012 22:34:07 +0000 (15:34 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Use after free and new device IDs in bluetooth from Andre Guedes,
    Yevgeniy Melnichuk, Gustavo Padovan, and Henrik Rydberg.

 2) Fix crashes with short packet lengths and VLAN in pktgen, from
    Nishank Trivedi.

 3) mISDN calls flush_work_sync() with locks held, fix from Karsten
    Keil.

 4) Packet scheduler gred parameters are reported to userspace
    improperly scaled, and WRED idling is not performed correctly.  All
    from David Ward.

 5) Fix TCP socket refcount problem in ipv6, from Julian Anastasov.

 6) ibmveth device has RX queue alignment requirements which are not
    being explicitly met resulting in sporadic failures, fix from
    Santiago Leon.

 7) Netfilter needs to take care when interpreting sockets attached to
    socket buffers, they could be time-wait minisockets.  Fix from Eric
    Dumazet.

 8) sock_edemux() has the same issue as netfilter did in #7 above, fix
    from Eric Dumazet.

 9) Avoid infinite loops in CBQ scheduler with some configurations, from
    Eric Dumazet.

10) Deal with "Reflection scan: an Off-Path Attack on TCP", from Jozsef
    Kadlecsik.

11) SCTP overcharges socket for TX packets, fix from Thomas Graf.

12) CODEL packet scheduler should not reset it's state every time it
    builds a new flow, fix from Eric Dumazet.

13) Fix memory leak in nl80211, from Wei Yongjun.

14) NETROM doesn't check skb_copy_datagram_iovec() return values, from
    Alan Cox.

15) l2tp ethernet was using sizeof(ETH_HLEN) instead of plain ETH_HLEN,
    oops.  From Eric Dumazet.

16) Fix selection of ath9k chips on which PA linearization and AM2PM
    predistoration are used, from Felix Fietkau.

17) Flow steering settings in mlx4 driver need to be validated properly,
    from Hadar Hen Zion.

18) bnx2x doesn't show the correct link duplex setting, from Yaniv
    Rosner.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
  pktgen: fix crash with vlan and packet size less than 46
  bnx2x: Add missing afex code
  bnx2x: fix registers dumped
  bnx2x: correct advertisement of pause capabilities
  bnx2x: display the correct duplex value
  bnx2x: prevent timeouts when using PFC
  bnx2x: fix stats copying logic
  bnx2x: Avoid sending multiple statistics queries
  net: qmi_wwan: call subdriver with control intf only
  net_sched: gred: actually perform idling in WRED mode
  net_sched: gred: fix qave reporting via netlink
  net_sched: gred: eliminate redundant DP prio comparisons
  net_sched: gred: correct comment about qavg calculation in RIO mode
  mISDN: Fix wrong usage of flush_work_sync while holding locks
  netfilter: log: Fix log-level processing
  net-sched: sch_cbq: avoid infinite loop
  net: qmi_wwan: fix Gobi device probing for un2430
  net: fix net/core/sock.c build error
  ixp4xx_hss: fix build failure due to missing linux/module.h inclusion
  caif: move the dereference below the NULL test
  ...

9 years agoMerge tag 'usb-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Fri, 14 Sep 2012 21:54:57 +0000 (14:54 -0700)]
Merge tag 'usb-3.6-rc6' of git://git./linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here are a number of USB patches, a bit more than I normally like this
  late in the -rc series, but given people's vacations (myself
  included), and the kernel summit, it seems to have happened this way.

  All are tiny, but they add up.  A number of gadget and xhci fixes, and
  a few new device ids.  All have been tested in linux-next.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'usb-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
  usb: chipidea: udc: don't stall endpoint if request list is empty in isr_tr_complete_low
  usb: chipidea: cleanup dma_pool if udc_start() fails
  usb: chipidea: udc: fix error path in udc_start()
  usb: chipidea: udc: add pullup fuction, needed by the uvc gadget
  usb: chipidea: udc: fix setup of endpoint maxpacket size
  USB: option: replace ZTE K5006-Z entry with vendor class rule
  EHCI: Update qTD next pointer in QH overlay region during unlink
  USB: cdc-wdm: fix wdm_find_device* return value
  USB: ftdi_sio: do not claim CDC ACM function
  usb: dwc3: gadget: fix pending isoc handling
  usb: renesas_usbhs: fixup DMA transport data alignment
  usb: gadget: at91udc: Don't check for ep->ep.desc
  usb: gadget: at91udc: don't overwrite driver data
  usb: dwc3: core: fix incorrect usage of resource pointer
  usb: musb: musbhsdma: fix IRQ check
  usb: musb: tusb6010: fix error path in tusb_probe()
  usb: musb: host: fix for musb_start_urb Oops
  usb: gadget: dummy_hcd: add support for USB_DT_BOS on rh
  usb: gadget: dummy_hcd: fixup error probe path
  usb: gadget: s3c-hsotg.c: fix error return code
  ...

9 years agoMerge tag 'tty-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Linus Torvalds [Fri, 14 Sep 2012 21:54:29 +0000 (14:54 -0700)]
Merge tag 'tty-3.6-rc6' of git://git./linux/kernel/git/gregkh/tty

Pull TTY fixes from Greg Kroah-Hartman:
 "Here are 2 tiny patches for a serial driver to resolve issues that
  people have reported with the 3.6-rc tree.

  Both of these have been in the linux-next tree for a while now.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'tty-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: imx: don't reinit clock in imx_setup_ufcr()
  tty: serial: imx: console write routing is unsafe on SMP

9 years agoMerge tag 'staging-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Fri, 14 Sep 2012 21:53:51 +0000 (14:53 -0700)]
Merge tag 'staging-3.6-rc6' of git://git./linux/kernel/git/gregkh/staging

Pull staging tree fixes from Greg Kroah-Hartman:
 "Here are a few staging tree fixes for problems that have been
  reported.

  Nothing major, just a number of tiny driver fixes.  All of these have
  been in the linux-next tree for a while.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'staging-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  drm/omap: add more new timings fields
  drm/omap: update for interlaced
  staging: r8712u: fix bug in r8712_recv_indicatepkt()
  staging: zcache: fix cleancache race condition with shrinker
  Staging: Android alarm: IOCTL command encoding fix
  staging: vt6656: [BUG] - Failed connection, incorrect endian.
  staging: ozwpan: fix memcmp() test in oz_set_active_pd()
  staging: wlan-ng: Fix problem with wrong arguments
  staging: comedi: das08: Correct AO output for das08jr-16-ao
  staging: comedi: das08: Correct AI encoding for das08jr-16-ao
  staging: comedi: das08: Fix PCI ref count
  staging: comedi: amplc_pci230: Fix PCI ref count
  staging: comedi: amplc_pc263: Fix PCI ref count
  staging: comedi: amplc_pc236: Fix PCI ref count
  staging: comedi: amplc_dio200: Fix PCI ref count
  staging: comedi: amplc_pci224: Fix PCI ref count
  drivers/iio/adc/at91_adc.c: adjust inconsistent IS_ERR and PTR_ERR
  staging iio: fix potential memory leak in lis3l02dq_ring.c
  staging:iio: prevent divide by zero bugs

9 years agoMerge tag 'driver-core-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 14 Sep 2012 21:53:22 +0000 (14:53 -0700)]
Merge tag 'driver-core-3.6-rc6' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg Kroah-Hartman:
 "Here is one fix for 3.6-rc6 for the kobject.h file.

  It fixes a reported oops if CONFIG_HOTPLUG is disabled.  It's been in
  the linux-next tree for a while now.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'driver-core-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kobject: fix oops with "input0: bad kobj_uevent_env content in show_uevent()"

9 years agovfs: make O_PATH file descriptors usable for 'fstat()'
Linus Torvalds [Fri, 14 Sep 2012 21:48:21 +0000 (14:48 -0700)]
vfs: make O_PATH file descriptors usable for 'fstat()'

We already use them for openat() and friends, but fstat() also wants to
be able to use O_PATH file descriptors.  This should make it more
directly comparable to the O_SEARCH of Solaris.

Note that you could already do the same thing with "fstatat()" and an
empty path, but just doing "fstat()" directly is simpler and faster, so
there is no reason not to just allow it directly.

See also commit 332a2e1244bd, which did the same thing for fchdir, for
the same reasons.

Reported-by: ольга крыжановская <olga.kryzhanovska@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org # O_PATH introduced in 3.0+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 years agoACPI / PM: Use KERN_DEBUG when no power resources are found
Aaron Lu [Fri, 14 Sep 2012 18:54:44 +0000 (20:54 +0200)]
ACPI / PM: Use KERN_DEBUG when no power resources are found

commit a606dac368eed5696fb38e16b1394f1d049c09e9 adds support to link
devices which have _PRx, if a device does not have _PRx, a warning
message will be printed.

This commit is for ZPODD on Intel ZPODD capable platforms, on other
platforms, it has no problem if there is no power resource for this
device, so a warning here is not appropriate, change it to debug.

Reported-by: Borislav Petkov <bp@amd64.org>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
9 years agoASoC: wm8904: correct the index
Bo Shen [Fri, 14 Sep 2012 08:09:09 +0000 (16:09 +0800)]
ASoC: wm8904: correct the index

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
9 years agoeCryptfs: Copy up attributes of the lower target inode after rename
Tyler Hicks [Thu, 13 Sep 2012 19:00:56 +0000 (12:00 -0700)]
eCryptfs: Copy up attributes of the lower target inode after rename

After calling into the lower filesystem to do a rename, the lower target
inode's attributes were not copied up to the eCryptfs target inode. This
resulted in the eCryptfs target inode staying around, rather than being
evicted, because i_nlink was not updated for the eCryptfs inode. This
also meant that eCryptfs didn't do the final iput() on the lower target
inode so it stayed around, as well. This would result in a failure to
free up space occupied by the target file in the rename() operation.
Both target inodes would eventually be evicted when the eCryptfs
filesystem was unmounted.

This patch calls fsstack_copy_attr_all() after the lower filesystem
does its ->rename() so that important inode attributes, such as i_nlink,
are updated at the eCryptfs layer. ecryptfs_evict_inode() is now called
and eCryptfs can drop its final reference on the lower inode.

http://launchpad.net/bugs/561129

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Cc: <stable@vger.kernel.org> [2.6.39+]
9 years agoeCryptfs: Call lower ->flush() from ecryptfs_flush()
Tyler Hicks [Thu, 13 Sep 2012 01:38:00 +0000 (18:38 -0700)]
eCryptfs: Call lower ->flush() from ecryptfs_flush()

Since eCryptfs only calls fput() on the lower file in
ecryptfs_release(), eCryptfs should call the lower filesystem's
->flush() from ecryptfs_flush().

If the lower filesystem implements ->flush(), then eCryptfs should try
to flush out any dirty pages prior to calling the lower ->flush(). If
the lower filesystem does not implement ->flush(), then eCryptfs has no
need to do anything in ecryptfs_flush() since dirty pages are now
written out to the lower filesystem in ecryptfs_release().

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
9 years agoeCryptfs: Write out all dirty pages just before releasing the lower file
Tyler Hicks [Thu, 13 Sep 2012 01:02:46 +0000 (18:02 -0700)]
eCryptfs: Write out all dirty pages just before releasing the lower file

Fixes a regression caused by:

821f749 eCryptfs: Revert to a writethrough cache model

That patch reverted some code (specifically, 32001d6f) that was
necessary to properly handle open() -> mmap() -> close() -> dirty pages
-> munmap(), because the lower file could be closed before the dirty
pages are written out.

Rather than reapplying 32001d6f, this approach is a better way of
ensuring that the lower file is still open in order to handle writing
out the dirty pages. It is called from ecryptfs_release(), while we have
a lock on the lower file pointer, just before the lower file gets the
final fput() and we overwrite the pointer.

https://launchpad.net/bugs/1047261

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Artemy Tregubenko <me@arty.name>
Tested-by: Artemy Tregubenko <me@arty.name>
Tested-by: Colin Ian King <colin.king@canonical.com>
9 years agoi2c: algo: pca: Fix mode selection for PCA9665
Thomas Kavanagh [Thu, 13 Sep 2012 15:16:55 +0000 (08:16 -0700)]
i2c: algo: pca: Fix mode selection for PCA9665

The code currently always selects turbo mode for PCA9665, no matter which
clock frequency is configured. This is because it compares the clock frequency
against constants reflecting (boundary / 100). Compare against real boundary
frequencies to fix the problem.

Signed-off-by: Thomas Kavanagh <tkavanagh@juniper.net>
Signed-off-by: Guenter Roeck <groeck@juniper.net>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
9 years agoMAINTAINERS: fix tree for current i2c-embedded development
Wolfram Sang [Wed, 12 Sep 2012 16:03:26 +0000 (18:03 +0200)]
MAINTAINERS: fix tree for current i2c-embedded development

Guide people to where their patches can be found these days.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
9 years agodrm/nouveau: fix booting with plymouth + dumb support
Dave Airlie [Fri, 14 Sep 2012 03:28:23 +0000 (13:28 +1000)]
drm/nouveau: fix booting with plymouth + dumb support

We noticed a plymouth bug on Fedora 18, and I then
noticed this stupid thinko, fixing it fixed the problem
with plymouth.

Cc: stable@vger.kernel.org
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agoStaging: bcm: Fix udelay related compilation error
Tushar Behera [Fri, 14 Sep 2012 04:37:33 +0000 (10:07 +0530)]
Staging: bcm: Fix udelay related compilation error

commit 6788d7dab6a5 ("Staging: bcm: Use udelay instead of msleep for
delays in nvm.c") replaces msleep with udelay values. udelay values
of more than 1000 should be replaced by mdelay instead.

This fixes following build error.
ERROR: "__bad_udelay" [drivers/staging/bcm/bcm_wimax.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2

Cc: Kevin McKinney <klmckinney1@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: xgifb: delete bogus video RAM configuration
Aaro Koskinen [Wed, 12 Sep 2012 21:45:43 +0000 (00:45 +0300)]
staging: xgifb: delete bogus video RAM configuration

The driver reconfigures DRAM size register to 8M (regardless what the
actual size was) once the init has been completed, overwriting the
correct value written during the early init. As a result if the driver
is unloaded and reloaded, the user will be limited to 8M video memory
and may lose some of the available video modes.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: xgifb: setup initial video RAM size for systems without BIOS
Aaro Koskinen [Wed, 12 Sep 2012 21:45:42 +0000 (00:45 +0300)]
staging: xgifb: setup initial video RAM size for systems without BIOS

On embedded systems without a BIOS, the DRAM sizing register is 0 after
the boot, and the driver thinks we have only 1 MB video memory. On such
cases, use the PCI window size for the initial size. This information
is needed only to create the I/O mapping - the driver will later detect
and configure the memory size correctly. Limit the size to 16 MB as it
should be sufficient for all supported video modes.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging/gdm72xx: usb_boot: replace firmware upgrade API
Macpaul Lin [Thu, 13 Sep 2012 10:11:55 +0000 (18:11 +0800)]
staging/gdm72xx: usb_boot: replace firmware upgrade API

Replace file I/O of reading firmware usb_boot()
by request_firmware().

Signed-off-by: Macpaul Lin <macpaul@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging/gdm72xx: usb_boot: coding style cleanup
Macpaul Lin [Thu, 13 Sep 2012 10:11:54 +0000 (18:11 +0800)]
staging/gdm72xx: usb_boot: coding style cleanup

1. Coding style re-formatting (tabs).
2. Remove unused MIN() marco.

Signed-off-by: Macpaul Lin <macpaul@gmail.com>
Cc: Paul Stewart <pstew@chromium.org>
Cc: Ben Chan <benchan@chromium.org>
Cc: Sage Ahn <syahn@gctsemi.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agoStaging: bcm: Convert INT to int in Transmit.c
Kevin McKinney [Fri, 14 Sep 2012 01:11:38 +0000 (21:11 -0400)]
Staging: bcm: Convert INT to int in Transmit.c

This patch converts INT to int in Transmit.c

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agoStaging: bcm: Properly format comments in Transmit.c
Kevin McKinney [Fri, 14 Sep 2012 01:11:37 +0000 (21:11 -0400)]
Staging: bcm: Properly format comments in Transmit.c

This patch properly formats comments
as reported by checkpatch.pl.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agoStaging: bcm: Remove initialization from if statement in Transmit.c
Kevin McKinney [Fri, 14 Sep 2012 01:11:36 +0000 (21:11 -0400)]
Staging: bcm: Remove initialization from if statement in Transmit.c

This patch Remove initialization from
if statement in Transmit.c as reported
by checkpatch.pl.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agoStaging: bcm: Properly format braces in Transmit.c
Kevin McKinney [Fri, 14 Sep 2012 01:11:35 +0000 (21:11 -0400)]
Staging: bcm: Properly format braces in Transmit.c

This patch cuddles braces as reported
by checkpatch.pl.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agoStaging: bcm: Fix all white space issues in Transmit.c
Kevin McKinney [Fri, 14 Sep 2012 01:11:34 +0000 (21:11 -0400)]
Staging: bcm: Fix all white space issues in Transmit.c

This patch fixes all white space issues
as reported by checkpatch.pl.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging:wlan-ng: remove the remaining return at the end of void function
Devendra Naga [Thu, 13 Sep 2012 09:31:39 +0000 (15:01 +0530)]
staging:wlan-ng: remove the remaining return at the end of void function

this removes the remaining return which the function actually
wants to return, for that it used goto failed and failed lable
have the return statement at the end of function, which is all
unnecessary, remove this and make the function return at the
places where it does the goto failed

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging:wlan-ng: remove all the return statements at the end of functions
Devendra Naga [Thu, 13 Sep 2012 09:31:18 +0000 (15:01 +0530)]
staging:wlan-ng: remove all the return statements at the end of functions

this file is having all unnecessary return statements at the end of functions
which return void, remove all of them.

some of the functions still uses the return for having the goto end,
which the label end defined at the end of the function which returns
void, this will be cleaned up in next change

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging:wlan-ng: clean hfa384x_usbctlx_submit
Devendra Naga [Thu, 13 Sep 2012 09:30:54 +0000 (15:00 +0530)]
staging:wlan-ng: clean hfa384x_usbctlx_submit

else is not required as such we can do with just with a single if

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging:wlan-ng: make wlan_unsetup void
Devendra Naga [Thu, 13 Sep 2012 09:30:30 +0000 (15:00 +0530)]
staging:wlan-ng: make wlan_unsetup void

this is because this function does a deinit job and most of the
deinit functions are expected to return void. Also this function
doesn't fail anywhere..

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agoStaging: ipack/devices/ipoctal: simplify ipoctal_write_tty()
Samuel Iglesias Gonsalvez [Thu, 13 Sep 2012 10:32:23 +0000 (12:32 +0200)]
Staging: ipack/devices/ipoctal: simplify ipoctal_write_tty()

Remove count_wr and the assigment of nb_bytes = 0 in that function as is
useless. Now it returns the count of the characters actually sent.

There is other nb_bytes = 0 deleted that has a duplicate a few lines before.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agoStaging: ipack/devices/ipoctal: acknowledge BREAK condition.
Samuel Iglesias Gonsalvez [Thu, 13 Sep 2012 10:32:22 +0000 (12:32 +0200)]
Staging: ipack/devices/ipoctal: acknowledge BREAK condition.

Clear the BREAK flag from the ISR register. Doing that, we avoid to read
the same condition for the next character received.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agostaging: ipack: remove irq field in struct ipack_device.
Jens Taprogge [Thu, 13 Sep 2012 10:32:21 +0000 (12:32 +0200)]
staging: ipack: remove irq field in struct ipack_device.

The field irq currently is identical to the slot number.  It does not seem to
have any real use.  The number is written to hardware in ipoctal but it seems
the value that is written does not matter.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agoStaging: ipack: move the responsibility to clear interrupts to the IPack devices.
Jens Taprogge [Thu, 13 Sep 2012 10:32:20 +0000 (12:32 +0200)]
Staging: ipack: move the responsibility to clear interrupts to the IPack devices.

Now the IPack device acknowledges its own IRQ.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 years agoStaging: ipack: Add IPACK_INT_SPACE memory space.
Jens Taprogge [Thu, 13 Sep 2012 10:32:19 +0000 (12:32 +0200)]
Staging: ipack: Add IPACK_INT_SPACE memory space.

This will allow us to correctly access the IPack INT space.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>