Segher Boessenkool [Wed, 16 May 2007 15:12:16 +0000 (01:12 +1000)]
[POWERPC] Fix VDSO compile warning
Maybe the type should have been char[] instead of __u8[]
in the first place, but this will do.
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Anton Blanchard [Tue, 15 May 2007 19:59:06 +0000 (05:59 +1000)]
[POWERPC] Reserve threadinfo flags for perfmon2
Reserve two TIF flags for perfmon2 and shift them into the low 16 bits
so we can use single assembly instructions to create constants based off
them.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Milton Miller [Sun, 10 Jun 2007 04:32:43 +0000 (14:32 +1000)]
[POWERPC] Fix console output getting dropped on platforms without udbg_putc
Previously, registering this early console would just result
in dropping early buffered printk output until a udbg_putc
was registered.
However, commit
69331af79cf29e26d1231152a172a1a10c2df511
clears the CON_PRINTBUFFER flag on the main console when a
CON_BOOT (early) console has been registered, resulting in
the buffered messages never being displayed to the user.
This fixes the problem by making sure we don't register udbg_console
on platforms that don't implement udbg_putc.
Signed-off-by: Milton Miller <miltonm@bga.com>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Thu, 7 Jun 2007 12:42:19 +0000 (22:42 +1000)]
[POWERPC] Fix per-cpu allocation on oldworld SMP powermacs
The per-cpu area(a) for the secondary CPU(s) isn't getting allocated
on old SMP powermacs that don't have the secondary CPU(s) listed in
the device tree, as per-cpu areas are now only allocated for CPUs in
the cpu_possible_map, and we aren't setting the bits for the secondary
CPU(s) until smp_prepare_cpus(), which is after per-cpu allocation.
Therefore this sets the bits for CPUs 1..3 in cpu_possible_map in
pmac_setup_arch, so they get per-cpu data allocated.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Linus Torvalds [Wed, 13 Jun 2007 21:09:39 +0000 (14:09 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: move input-polldev to drivers/input
Input: i8042 - add ULI EV4873 to noloop list
Input: i8042 - add ASUS P65UP5 to the noloop list
Input: usbtouchscreen - fix fallout caused by move from drivers/usb
Pierre Ossman [Wed, 13 Jun 2007 17:06:03 +0000 (19:06 +0200)]
mmc: get back read-only switch function
Somehow the code to read the read-only switch of SD cards got lost
in the reorganisation.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Ragner Magalhaes [Wed, 13 Jun 2007 17:09:28 +0000 (19:09 +0200)]
mmc-omap: fix sd response type 6 vs. 1
Ignoring OMAP_MMC_STAT_CARD_ERR, treating it as if the command
completed correctly.
Signed-off-by: Ragner Magalhaes <ragner.magalhaes@indt.org.br>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Dmitry Torokhov [Wed, 13 Jun 2007 05:49:58 +0000 (01:49 -0400)]
Input: move input-polldev to drivers/input
To work around deficiences in Kconfig that allows to "select"
a symbol without automatically selecting all dependencies for
that symbol move input-polldev from drivers/input/misc to
drivers/input thus removing extra dependency on CONFIG_INPUT_MISC.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Linus Torvalds [Wed, 13 Jun 2007 03:35:10 +0000 (20:35 -0700)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (89 commits)
myri10ge: update driver version
myri10ge: report when the link partner is running in Myrinet mode
myri10ge: limit the number of recoveries
NetXen: Fix link status messages
Revert "[netdrvr e100] experiment with doing RX in a similar manner to eepro100"
[PATCH] libertas: convert libertas_mpp into anycast_mask
[PATCH] libertas: actually send mesh frames to mesh netdev
[PATCH] libertas: deauthenticate from AP in channel switch
[PATCH] libertas: pull current channel from firmware on mesh autostart
[PATCH] libertas: reduce SSID and BSSID mixed-case abuse
[PATCH] libertas: remove WPA_SUPPLICANT structure
[PATCH] libertas: remove structure WLAN_802_11_SSID and libertas_escape_essid
[PATCH] libertas: tweak association debug output
[PATCH] libertas: fix big-endian associate command.
[PATCH] libertas: don't byte-swap firmware version number. It's a byte array.
[PATCH] libertas: more endianness fixes, in tx.c this time
[PATCH] libertas: More endianness fixes.
[PATCH] libertas: first pass at fixing up endianness issues
[PATCH] libertas: sparse fixes
[PATCH] libertas: fix character set in README
...
Jeff Garzik [Wed, 13 Jun 2007 02:34:34 +0000 (22:34 -0400)]
Merge branch 'master' into upstream-fixes
Jeff Garzik [Wed, 13 Jun 2007 02:27:52 +0000 (22:27 -0400)]
Merge branch 'libertas-fixes' of git://git./linux/kernel/git/linville/wireless-2.6 into upstream-fixes
Jeff Garzik [Wed, 13 Jun 2007 02:27:30 +0000 (22:27 -0400)]
Merge branch 'libertas' of git://git./linux/kernel/git/linville/wireless-2.6 into upstream-fixes
Tejun Heo [Mon, 11 Jun 2007 05:04:01 +0000 (14:04 +0900)]
sysfs: fix race condition around sd->s_dentry, take#2
Allowing attribute and symlink dentries to be reclaimed means
sd->s_dentry can change dynamically. However, updates to the field
are unsynchronized leading to race conditions. This patch adds
sysfs_lock and use it to synchronize updates to sd->s_dentry.
Due to the locking around ->d_iput, the check in sysfs_drop_dentry()
is complex. sysfs_lock only protect sd->s_dentry pointer itself. The
validity of the dentry is protected by dcache_lock, so whether dentry
is alive or not can only be tested while holding both locks.
This is minimal backport of sysfs_drop_dentry() rewrite in devel
branch.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tejun Heo [Mon, 11 Jun 2007 05:03:27 +0000 (14:03 +0900)]
sysfs: fix condition check in sysfs_drop_dentry()
The condition check doesn't make much sense as it basically always
succeeds. This causes NULL dereferencing on certain cases. It seems
that parentheses are put in the wrong place. Fix it.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eric Sandeen [Mon, 11 Jun 2007 05:02:45 +0000 (14:02 +0900)]
sysfs: store sysfs inode nrs in s_ino to avoid readdir oopses
Backport of
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc1/2.6.22-rc1-mm1/broken-out/gregkh-driver-sysfs-allocate-inode-number-using-ida.patch
For regular files in sysfs, sysfs_readdir wants to traverse
sysfs_dirent->s_dentry->d_inode->i_ino to get to the inode number.
But, the dentry can be reclaimed under memory pressure, and there is
no synchronization with readdir. This patch follows Tejun's scheme of
allocating and storing an inode number in the new s_ino member of a
sysfs_dirent, when dirents are created, and retrieving it from there
for readdir, so that the pointer chain doesn't have to be traversed.
Tejun's upstream patch uses a new-ish "ida" allocator which brings
along some extra complexity; this -stable patch has a brain-dead
incrementing counter which does not guarantee uniqueness, but because
sysfs doesn't hash inodes as iunique expects, uniqueness wasn't
guaranteed today anyway.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brice Goglin [Mon, 11 Jun 2007 18:27:07 +0000 (20:27 +0200)]
myri10ge: update driver version
Update myri10ge driver version to 1.3.1-1.248.
Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Brice Goglin [Mon, 11 Jun 2007 18:26:50 +0000 (20:26 +0200)]
myri10ge: report when the link partner is running in Myrinet mode
Since Myri-10G boards may also run in Myrinet mode instead of Ethernet,
add a message when we detect that the link partner is not running in the
right mode.
Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Brice Goglin [Mon, 11 Jun 2007 18:26:31 +0000 (20:26 +0200)]
myri10ge: limit the number of recoveries
Limit the number of recoveries from a NIC hw watchdog reset to 1 by default.
It enables detection of defective NICs immediately since these memory parity
errors are expected to happen very rarely (less than once per century*NIC).
Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Mithlesh Thukral [Mon, 11 Jun 2007 10:30:58 +0000 (03:30 -0700)]
NetXen: Fix link status messages
NetXen: Fix incorrect link status even with switch turned OFF.
NetXen driver failed to accurately indicate when a link is up or down.
This was encountered during failover testing, when the first port
indicated that the link was up even when the 10G switch it was assigned
to in the Bladecenter was turned off completely.
Signed-off by: Wen Xiong <wenxiong@us.ibm.com>
Signed-off by: Mithlesh Thukral <mithlesh@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jeff Garzik [Tue, 12 Jun 2007 22:52:31 +0000 (18:52 -0400)]
Revert "[netdrvr e100] experiment with doing RX in a similar manner to eepro100"
This reverts commit
d52df4a35af569071fda3f4eb08e47cc7023f094.
This patch attempted to fix e100 for non-cache coherent memory
architectures by using the cb style code that eepro100 had and using
the EL and s bits from the RFD list. Unfortunately the hardware
doesn't work exactly like this and therefore this patch actually
breaks e100. Reverting the change brings it back to the previously
known good state for 2.6.22. The pending rewrite in progress to this
code can then be safely merged later.
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Luis Carlos [Thu, 7 Jun 2007 20:40:59 +0000 (16:40 -0400)]
[PATCH] libertas: convert libertas_mpp into anycast_mask
With firmware 5.220.11.p5, this allows to specify the anycast addresses the
device will listen to.
The anycast address range is C0:27:C0:27:C0:XX where XX goes from 00 to 1F (or
0 to 31 in dec). The value to write on anycast_mask will specify which
addresses the device listens to. Bits in a 32 bit int are numbered from 0
(least significative bit) to 31. A specific address ending in YY will be
listened to if bit YY in the value is set to one.
Examples:
0x00000000 : do not listen to any anycast address
0xFFFFFFFF : listen to every anycast address from :00 to :1F
0x00000013 : listen to anycast addresses :00, :01 and :04
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Tue, 5 Jun 2007 00:05:23 +0000 (20:05 -0400)]
[PATCH] libertas: actually send mesh frames to mesh netdev
Found by Luis; got broken during module split.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo Rus [Wed, 30 May 2007 16:16:13 +0000 (12:16 -0400)]
[PATCH] libertas: deauthenticate from AP in channel switch
This avoids channel mismatch between driver and firmware in case we change
channel while associated to an AP.
Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo Rus [Wed, 30 May 2007 16:14:34 +0000 (12:14 -0400)]
[PATCH] libertas: pull current channel from firmware on mesh autostart
Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dmitry Torokhov [Tue, 12 Jun 2007 04:33:32 +0000 (00:33 -0400)]
Input: i8042 - add ULI EV4873 to noloop list
The box does not implement AUX LOOP command properly and so we
can't test for AUX IRQ delivery so blacklist it via DMI and
assume that AUX port is present.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Dmitry Torokhov [Tue, 12 Jun 2007 04:33:27 +0000 (00:33 -0400)]
Input: i8042 - add ASUS P65UP5 to the noloop list
This board does not raise AUX IRQ in response to AUX LOOP command
which interferes with our test for proper AUX IRQ wiring. Put it
in the blacklist and assume mouse is present.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Ondrej Zary [Tue, 12 Jun 2007 04:33:13 +0000 (00:33 -0400)]
Input: usbtouchscreen - fix fallout caused by move from drivers/usb
During the move from drivers/usb/input into drivers/input/touchscreen
Kconfig variables were shuffled a bit to use a new namespace
(CONFIG_TOUCHSCREEN) while usbtouchscreen was still using old ones.
Also noticed by Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Linus Torvalds [Mon, 11 Jun 2007 22:46:08 +0000 (15:46 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/mlx4: Make sure RQ allocation is always valid
RDMA/cma: Fix initialization of next_port
IB/mlx4: Fix zeroing of rnr_retry value in ib_modify_qp()
mlx4_core: Don't set MTT address in dMPT entries with PA set
mlx4_core: Check firmware command interface revision
IB/mthca, mlx4_core: Fix typo in comment
mlx4_core: Free catastrophic error MSI-X interrupt with correct dev_id
mlx4_core: Initialize ctx_list and ctx_lock earlier
mlx4_core: Fix CQ context layout
Linus Torvalds [Mon, 11 Jun 2007 18:41:00 +0000 (11:41 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] Fix smp barriers in test_and_{change,clear,set}_bit
[MIPS] Fix IP27 build
[MIPS] Fix modpost warnings by making start_secondary __cpuinit
[MIPS] SMTC: Fix build error caused by nonsense code.
[MIPS] SMTC: The MT ASE requires to initialize c0_pagemask and c0_wired.
[MIPS] SMTC: Don't continue in set_vi_srs_handler on detected bad arguments.
[MIPS] SMTC: Fix warning.
[MIPS] Wire up utimensat, signalfd, timerfd, eventfd
[MIPS] Atlas: Fix build.
[MIPS] Always install the DSP exception handler.
[MIPS] SMTC: Don't set and restore irqregs ptr from self_ipi.
[MIPS] Fix KMODE for the R3000
Linus Torvalds [Mon, 11 Jun 2007 18:39:25 +0000 (11:39 -0700)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] CIFS should honour umask
[CIFS] Missing flag on negprot needed for some servers to force packet signing
[CIFS] whitespace cleanup part 2
[CIFS] whitespace cleanup
[CIFS] fix mempool destroy done in wrong order in cifs error path
[CIFS] typo in previous patch
[CIFS] Fix oops on failed cifs mount (in kthread_stop)
Linus Torvalds [Mon, 11 Jun 2007 18:39:05 +0000 (11:39 -0700)]
Merge /pub/scm/linux/kernel/git/davej/agpgart
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
[AGPGART] intel_agp: Add support for G33, Q33 and Q35 chipsets
[AGPGART] intel_agp: add support for 945GME
[AGPGART] intel_agp: add support for 965GME/GLE
[AGPGART] intel_agp: use table for device probe
[AGPGART] intel_agp: cleanup intel private data
Linus Torvalds [Mon, 11 Jun 2007 18:38:14 +0000 (11:38 -0700)]
Merge branch 'linus-plus-plus' of /linux/kernel/git/jgarzik/libata-dev
* 'linus-plus-plus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: limit post SRST nsect/lbal wait to ~100ms
libata: force PIO on IOMEGA ZIP 250 ATAPI
libata passthru: update cached device paramters
libata passthru: always enforce correct DEV bit
libata passthru: map UDMA protocols
libata passthru: support PIO multi commands
libata passthru: update protocol numbers
libata: Correct abuse of language
libata-core/sff: Fix multiple assumptions about DMA
ahci: Add MCP73/MCP77 support to AHCI driver
libata: fix hw_sata_spd_limit initialization
libata: print device model and firmware revision for ATAPI devices
libata: fix probe time irq printouts
libata: disable NCQ for HITACHI HTS541680J9SA00/SB21C7EP
remove unused variable in pata_isapnp
Linus Torvalds [Mon, 11 Jun 2007 18:32:28 +0000 (11:32 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/mchehab/v4l-dvb
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
V4L/DVB (5751): Ivtv: fix ia64 printk format warnings.
V4L/DVB (5761): Fix broken b2c2 dependency on non x86 architectures
V4L/DVB (5673): Fix audio stuttering for saa711x/ivtv when in radio mode.
V4L/DVB (5736): Add V4L2_FBUF_CAP/FLAG_LOCAL/GLOBAL_INV_ALPHA
V4L/DVB (5732): Add ivtv CROPCAP support and fix ivtv S_CROP for video output.
V4L/DVB (5730): Remove unused V4L2_CAP_VIDEO_OUTPUT_POS
V4L/DVB (5720): Usbvision: fix urb allocation and submits
V4L/DVB (5716): Tda10086,tda826x: fix tuning, STR/SNR values
V4L/DVB (5675): Move big PIO accesses from the interrupt handler to a workhandler
V4L/DVB (5699): Cinergyt2: fix file release handler
V4L/DVB (5700): Saa7111: fix picture settings cache bug
V4L/DVB (5702): Fix Kconfig items to avoid linkedition errors
Linus Torvalds [Mon, 11 Jun 2007 18:31:43 +0000 (11:31 -0700)]
Merge /pub/scm/linux/kernel/git/bart/ide-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6:
ide: Add the MCP73/77 support to PATA driver
Add the PATA controller device ID to pci_ids.h for MCP73/MCP77.
hpt366: disallow Ultra133 for HPT374
ide: generic IDE PCI driver, add another device exception
ide: HPA detect from resume
it821x: RAID mode fixes
serverworks: fix CSB6 tuning logic
serverworks: remove crappy code
Linus Torvalds [Mon, 11 Jun 2007 18:31:18 +0000 (11:31 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
mmc: don't call switch on old cards
mmc: fix broken if clause
au1xmmc: Replace C code with call to ARRAY_SIZE() macro.
mmc-atmel: remove linux/mmc/protocol.h dependencies
Linus Torvalds [Mon, 11 Jun 2007 18:31:05 +0000 (11:31 -0700)]
Merge branch 'splice-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-block
* 'splice-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-block:
splice: __generic_file_splice_read: fix read/truncate race
splice: __generic_file_splice_read: fix i_size_read() length checks
splice: move balance_dirty_pages_ratelimited() outside of splice actor
pipe: move pipe_inode_info structure decleration up before it's used
splice: remove do_splice_direct() symbol export
splice: move inode size check into generic_file_splice_read()
Dan Williams [Tue, 29 May 2007 04:03:31 +0000 (00:03 -0400)]
[PATCH] libertas: reduce SSID and BSSID mixed-case abuse
Kill mixed case function names from scan.c/scan.h.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Tue, 29 May 2007 03:56:10 +0000 (23:56 -0400)]
[PATCH] libertas: remove WPA_SUPPLICANT structure
Unused.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Tue, 29 May 2007 03:54:55 +0000 (23:54 -0400)]
[PATCH] libertas: remove structure WLAN_802_11_SSID and libertas_escape_essid
Replace WLAN_802_11_SSID with direct 'ssid' and 'ssid_len' members
like ieee80211. In the process, remove private libertas_escape_essid
and depend on the ieee80211 implementation of escape_essid instead.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Sat, 26 May 2007 03:51:12 +0000 (23:51 -0400)]
[PATCH] libertas: tweak association debug output
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Sat, 26 May 2007 03:41:16 +0000 (23:41 -0400)]
[PATCH] libertas: fix big-endian associate command.
Byte-swapping length fields and then passing them to memcpy() considered
harmful.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Sat, 26 May 2007 03:40:21 +0000 (23:40 -0400)]
[PATCH] libertas: don't byte-swap firmware version number. It's a byte array.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Sat, 26 May 2007 03:39:34 +0000 (23:39 -0400)]
[PATCH] libertas: more endianness fixes, in tx.c this time
Now we finally get connectivity. For a while, before something else dies...
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Sat, 26 May 2007 03:38:14 +0000 (23:38 -0400)]
[PATCH] libertas: More endianness fixes.
Now it at least manages to load the firmware.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Sat, 26 May 2007 03:36:54 +0000 (23:36 -0400)]
[PATCH] libertas: first pass at fixing up endianness issues
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Sat, 26 May 2007 03:23:43 +0000 (23:23 -0400)]
[PATCH] libertas: sparse fixes
Fix various issues reported by sparse.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Woodhouse [Sat, 26 May 2007 03:15:27 +0000 (23:15 -0400)]
[PATCH] libertas: fix character set in README
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo Rus [Sat, 26 May 2007 03:12:19 +0000 (23:12 -0400)]
[PATCH] libertas: support for mesh autostart on firmware 5.220.11
Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo Rus [Sat, 26 May 2007 03:08:34 +0000 (23:08 -0400)]
[PATCH] libertas: split wext for eth and msh
Separate wireless handlers of mshX and ethX. ethX remains as before.
For mshX, it has been disabled set/get essid, wap and set mode. Get mode always
returns "Repeater" and by now we use the Nickname to show if the mesh is active
("Mesh") or not (empty). The rest remains as before.
Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo Rus [Sat, 26 May 2007 03:05:27 +0000 (23:05 -0400)]
[PATCH] libertas: make mac address configuration work with mesh interface too
Signed-off-by: Luis Carlos Cobo Rus <luiscarlos@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo Rus [Sat, 26 May 2007 03:04:13 +0000 (23:04 -0400)]
[PATCH] libertas: updated readme file
Fix some wording and blinding table command options, clarify argument list for
fwt_add and fwt_list, simplify fwt_list_route
Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Sat, 26 May 2007 03:01:24 +0000 (23:01 -0400)]
[PATCH] libertas: Make WPA work through supplicant handshake
Fix WPA so it works up through the supplicant 4-Way handshake process.
Doesn't successfully pass traffic yet; may be problems installing
the GTK to the firmware.
- RSN needs to be enabled before the association command is sent
- Use keys from the association request not the adapter structure
- cmd_act_mac_strict_protection_enable != IW_AUTH_DROP_UNENCRYPTED
- Fix network filtering logic in is_network_compatible() WPA helpers
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Sat, 26 May 2007 02:58:55 +0000 (22:58 -0400)]
[PATCH] libertas: add more verbose debugging to libertas_cmd_80211_authenticate
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Sat, 26 May 2007 02:54:50 +0000 (22:54 -0400)]
[PATCH] libertas: debug print spacing fixes in assoc.c
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Sat, 26 May 2007 02:38:41 +0000 (22:38 -0400)]
[PATCH] libertas: send SIOCGIWSCAN event after partial scans too
Any time the driver gets new scan results, even from partial scans,
it should send the scan event to userspace.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Sat, 26 May 2007 02:30:48 +0000 (22:30 -0400)]
[PATCH] libertas: honor specific channel requests during association
Previously if a fixed channel was specified along with an SSID,
the channel request would be ignored during the association
process. Instead, when searching for an adhoc or infrastructure
network to join, allow filtering results based on channel so
that the driver doesn't pick a BSS on a different channel than
requested.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Sat, 26 May 2007 02:19:59 +0000 (22:19 -0400)]
[PATCH] libertas: fix default adhoc channel
Inadvertently removed on a previous commit; causes the first
adhoc start to fail if a channel has not been set or no
other association has been made.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Sat, 26 May 2007 02:18:47 +0000 (22:18 -0400)]
[PATCH] libertas: fix deadlock SIOCGIWSCAN handler
Update signal quality before the locked scan result translation loop,
because calling libertas_prepare_and_send_command() with the
'waitforrsp' option grabs adapter->lock in the command return processing,
leading to the deadlock.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Sat, 26 May 2007 01:59:29 +0000 (21:59 -0400)]
[PATCH] libertas: correct error report paths for wlan_fwt_list_ioctl
Ensure the leave debug print gets triggered when necessary.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Fri, 25 May 2007 21:33:28 +0000 (17:33 -0400)]
[PATCH] libertas: correctly balance locking in libertas_process_rx_command
adapter->lock should released after unlocking adapter->driver_lock to
balance the order in which they were locked at the top of the function.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Fri, 25 May 2007 21:29:34 +0000 (17:29 -0400)]
[PATCH] libertas: fix debug enter/leave prints for libertas_execute_next_command
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Fri, 25 May 2007 21:28:30 +0000 (17:28 -0400)]
[PATCH] libertas: use compare_ether_addr() rather than memcmp() where appropriate
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Fri, 25 May 2007 21:27:31 +0000 (17:27 -0400)]
[PATCH] libertas: use MAC_FMT and MAC_ARG where appropriate
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Fri, 25 May 2007 21:09:41 +0000 (17:09 -0400)]
[PATCH] libertas: make association paths consistent
The BSS to associate with (in either Infrastructure or IBSS join
operations) is now stored in _one_ place in the association request (the
bss member), not two places as before (pattemptedbss and
curbssparams->bssdescriptor).
Association requests are passed to the necessary association functions
to (a) give them access to the bss member and (b) ensure that
association/join/start setup uses settings from the request, not the
current adapter settings (which may not be valid for the requested
settings).
Because the 'bss' member of the association request is used now, the
command return functions from associate and adhoc join/start need access
to the in-progress association request to update curbssparams when
everything is done. The association worker moves the request from
pending to in-progress for the duration of the association attempt.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Fri, 25 May 2007 20:46:33 +0000 (16:46 -0400)]
[PATCH] libertas: move channel changing into association framework
Handle channel changes through the deferred association framework
rather than directly. Fixes errors when setting channels along
with other parameters like mode and SSID.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Marcelo Tosatti [Fri, 25 May 2007 20:28:20 +0000 (16:28 -0400)]
[PATCH] libertas: fix oops on rmmod
Use list_for_each_entry_safe, to protect against list_del().
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo Rus [Fri, 25 May 2007 20:26:47 +0000 (16:26 -0400)]
[PATCH] libertas: cleanup of fwt_list_route processing
Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Fri, 25 May 2007 20:25:21 +0000 (16:25 -0400)]
[PATCH] libertas: fix 'keep previous scan' behavior
Do not clear the scan list except under specific conditions, such as
when (a) user-requested, or (b) joining/starting an adhoc network.
Furthermore, only clear entries which match the SSID or BSSID of the
request, not the whole scan list.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Fri, 25 May 2007 20:15:56 +0000 (16:15 -0400)]
[PATCH] libertas: make scan result handling more flexible
- use a linked list for scan results
- age scan results
- pass bss_descriptors around instead of indexes into the scan table
- lock access to the scan results
- stop returning EAGAIN from SIOCGIWSCAN handler
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo [Fri, 25 May 2007 17:53:26 +0000 (13:53 -0400)]
[PATCH] libertas: updated mesh commands for 5.220.9.p11
Updated commands fwt_add and fwt_list, bt_list.
New commands: bt_get_invert, bt_set_invert, to invert the blinding table,
i.e., receive only frames from nodes listed in the BT.
This patch needs/is needed for firmware 5.220.9.p11.
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo Rus [Fri, 25 May 2007 17:48:54 +0000 (13:48 -0400)]
[PATCH] libertas: version bump (321p0) and cmds update for new fw (5.220.10.p0)
This patch along with the previous commands update one, is necessary for
mesh and fwt ioctls to work properly with firmware version 5.220.10.p0
and later.
Signed-off-by: Luis Carlos Cobo Rus <luiscarlos@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Fri, 25 May 2007 17:36:57 +0000 (13:36 -0400)]
[PATCH] libertas: don't tear down netdev in libertas_activate_card
libertas_activate_card() doesn't create the netdev, and shouldn't
free it on error. The caller of libertas_activate_card() is
responsible for cleaning up errors from libertas_add_card(),
not libertas_activate_card().
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Fri, 25 May 2007 17:35:23 +0000 (13:35 -0400)]
[PATCH] libertas: correctly unregister mesh netdev on error
Subject says it all.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Fri, 25 May 2007 17:16:38 +0000 (13:16 -0400)]
[PATCH] libertas: replace 'macaddress' with 'bssid'
Start to normalize bss_descriptor with ieee80211_network so we can
eventually replace bss_descriptor more easily.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Fri, 25 May 2007 17:13:25 +0000 (13:13 -0400)]
[PATCH] libertas: call SET_NETDEV_DEV from common code
Move usage of SET_NETDEV_DEV into common code since it has nothing
to do with bus-specific devices. Also fixes a bug where the mesh
device was getting SET_NETDEV_DEV called after register_netdevice,
resulting in no 'device' link in /sys/class/net/mshX/.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo [Fri, 25 May 2007 17:11:13 +0000 (13:11 -0400)]
[PATCH] libertas: fixed kernel oops on module/card removal
Fixed kernel oops on module/card removal (using dongles)
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo [Fri, 25 May 2007 17:10:18 +0000 (13:10 -0400)]
[PATCH] libertas: add URB debug info
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Cobo [Fri, 25 May 2007 17:08:33 +0000 (13:08 -0400)]
[PATCH] libertas: fixed incorrect assigment of fcs errors to frag errors
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 25 May 2007 17:05:16 +0000 (13:05 -0400)]
[PATCH] libertas: remove unused variables in wlan_dev_t
Actually, this patch removev wlan_dev_t totally and puts the used variables
of it directly into wlan_private. That reduces one level of indirection and
looks a little bit simpler. It's now "priv->card" and not
"priv->wlan_dev.card" and "priv->dev" instead of "priv->wlan_dev.netdev"
Changed two occurences of "((wlan_private *) dev->priv)->wlan_dev.netdev"
into "dev", because I didn't see the point in doing pointer-ping-pong.
The variables "ioport", "upld_rcv" and "upld_type" where unused. They have
been removed.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 25 May 2007 16:49:10 +0000 (12:49 -0400)]
[PATCH] libertas: let DRV_NAME be overridable
For now, it's "libertas" by default, but that is overwritten in
if_usb.c/if_bootcmd.c and in if_cs.c.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 25 May 2007 16:41:52 +0000 (12:41 -0400)]
[PATCH] libertas: fix RESET logic at unload time
Previously, we had a fixed array of 5 elements where we remembered all
initialized devices. This has been changed to use a "struct list_head"
organization, which is IMHO cleaner.
Also renamed usb_cardp to cardp, as in the reset of the code.
Renamed reset_device() to if_usb_reset_device() like many other functions.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 25 May 2007 16:37:58 +0000 (12:37 -0400)]
[PATCH] libertas: split module into two (libertas.ko and usb8xxx.ko)
* add CONFIG_LIBERTAS to Kconfig
* remove global variable libertas_fw_name, the USB module might want to
use a different default FW name than the CF module, so libertas_fw_name
is now local to if_usb.c
* exported some symbols as GPL
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 25 May 2007 16:18:36 +0000 (12:18 -0400)]
[PATCH] libertas: move contents of fw.h to decl.h
Also removes some useless "extern" declarations from function declaration.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 25 May 2007 16:17:06 +0000 (12:17 -0400)]
[PATCH] libertas: indirect all hardware access via hw_XXXX functions
This functions makes all libertas_sbi_XXX functions static to the
if_usb.c file and renames them to if_usb_XXXX(). The get called from
other places of the source code via priv->hw_XXXX().
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Chris Ball [Fri, 25 May 2007 16:13:24 +0000 (12:13 -0400)]
[PATCH] libertas: wakeup both mesh and normal wakeup when getting out of scan
The previous patch wakes up the mesh device *instead* of the wlan device
when coming out of scan. We need to wake up both of them.
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Javier Cardona [Fri, 25 May 2007 16:12:06 +0000 (12:12 -0400)]
[PATCH] libertas: added transmission failures to mesh statistics
Added transmission failures to mesh statistics.
Removed whitespace before newlines.
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Marcelo Tosatti [Fri, 25 May 2007 16:09:13 +0000 (12:09 -0400)]
[PATCH] libertas: fix error handling of card initialization
Subject says it all.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Javier Cardona [Fri, 25 May 2007 16:06:56 +0000 (12:06 -0400)]
[PATCH] libertas: fixed transmission flow control on the mesh interface
This patch implements proper transmission flow control on mshX.
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 25 May 2007 16:04:31 +0000 (12:04 -0400)]
[PATCH] libertas: split wlan_add_card()
Split wlan_add_card() into a part that just setups kernel parameters and
into the function libertas_activate_card(), which will implizitly use
hardware functions by the started thread.
This allows us later to do something like this:
priv = libertas_add_card();
priv->hw_command_to_host = if_usb_command_to_host;
priv->hw_xxxx = if_usb_xxxx;
priv->hw_yyyy = if_usb_yyyy;
wlan_activate_card()
and of course the CF driver can set it's own functions.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 25 May 2007 16:01:42 +0000 (12:01 -0400)]
[PATCH] libertas: move reset_device() code main.c to if_usb.c
The reset_device() logic is only needed for USB devices, not for CF
devices.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 25 May 2007 15:58:22 +0000 (11:58 -0400)]
[PATCH] libertas: changed some occurences of kmalloc() + memset(&a,0,sz) to kzalloc()
The subject says it all.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 25 May 2007 15:56:37 +0000 (11:56 -0400)]
[PATCH] libertas: fix SSID output
* a newline was missing
* changed %32s to '%s', no need to right justify the ESSID
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 25 May 2007 15:55:19 +0000 (11:55 -0400)]
[PATCH] libertas: get rid of libertas_sbi_get_priv()
It's not really needed, because we can call wlan_remove_card() with
wlan_private* anyway.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 25 May 2007 15:52:42 +0000 (11:52 -0400)]
[PATCH] libertas: change debug output of libertas_interrupt()
It used to be LBS_DEB_MAIN, now it's LBS_DEB_THREAD
Also fixed a missing ":" in lbs_deb_enter()
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 25 May 2007 15:49:19 +0000 (11:49 -0400)]
[PATCH] libertas: single out mesh code
This patches adds the two functions wlan_add_mesh() and wlan_remove_mesh(),
which are responsible for the mshX interface. In a CF driver with a non-
mesh-aware firmware you can omit the calls to this functions.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 25 May 2007 15:32:07 +0000 (11:32 -0400)]
[PATCH] libertas: tune debug code
* renamed module parameter back to libertas_debug
* change from bit shifts to constants, that way it's easier to look at the
source and specify the libertas_debug=0xXXXX module parameter
* moved module_param from fw.c to main.c, where it belongs better
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 25 May 2007 15:27:16 +0000 (11:27 -0400)]
[PATCH] libertas: make debug configurable
The debug output of libertas was either not present or it was overwhelming.
This patch adds the possibility to specify a bitmask for the area of
interest. One should then only get the desired output.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 25 May 2007 04:37:28 +0000 (00:37 -0400)]
[PATCH] libertas: exclude non-used code when PROC_DEBUG is not set
This reduces usb8xxx.ko by 951 bytes (text) and 256 bytes (data)
when PROC_DEBUG isn't defined.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Marcelo Tosatti [Fri, 25 May 2007 04:33:28 +0000 (00:33 -0400)]
[PATCH] libertas: fix scanning from associate path
The previous scan fix did not account for scan paths other than set_scan()
that need to do a full scan at once.
Add a "full_scan" parameter to wlan_scan_networks() to control such
behaviour.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig [Fri, 25 May 2007 04:14:38 +0000 (00:14 -0400)]
[PATCH] libertas: make libertas_wlan_data_rates static
Move libertas_wlan_data_rates into wext.c and make it static. wext.c is the
only user of this array.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
git.openpandora.org / pandora-kernel.git / log