pandora-kernel.git
11 years agoMerge branch 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linux
Linus Torvalds [Fri, 28 May 2010 17:19:03 +0000 (10:19 -0700)]
Merge branch 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linux

* 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linux:
  ARM: S5PV210: serial: Fix section mismatch warning
  ARM: s3c2410_defconfig: Add new machines
  ARM: s3c6400_defconfig: Add framebuffer and basic LCD
  ARM: s3c6400_defconfig: Add RTC driver support
  ARM: s3c6400_defconfig: Enable USB host side
  ARM: s3c6400_defconfig: Add SPI driver
  ARM: s3c6400_defconfig: Update compiled machines
  ARM: S5P: Regoster clk_xusbxti clock for hsotg driver
  ARM: S3C64XX: Add USB OTG HCLK to the list of clocks
  ARM: SAMSUNG: gpio-cfg.h: update documentation
  ARM: SAMSUNG: Documentation: add documentation on GPIO code
  ARM: SAMSUNG: Fix documentation for s3c_gpio_cfgpin()
  ARM: S3C24XX: Documentation: add section on gpiolib changes
  ARM: S3C24XX: Documentation: update GPIO documentation
  ARM: S3C24XX: Documentation: update documentation overview
  ARM: SAMSUNG: Documentation: update directory layout
  ARM: SAMSUNG: Documentation: update the list of SoCs supported

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Fri, 28 May 2010 17:18:40 +0000 (10:18 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (22 commits)
  netlink: bug fix: wrong size was calculated for vfinfo list blob
  netlink: bug fix: don't overrun skbs on vf_port dump
  xt_tee: use skb_dst_drop()
  netdev/fec: fix ifconfig eth0 down hang issue
  cnic: Fix context memory init. on 5709.
  drivers/net: Eliminate a NULL pointer dereference
  drivers/net/hamradio: Eliminate a NULL pointer dereference
  be2net: Patch removes redundant while statement in loop.
  ipv6: Add GSO support on forwarding path
  net: fix __neigh_event_send()
  vhost: fix the memory leak which will happen when memory_access_ok fails
  vhost-net: fix to check the return value of copy_to/from_user() correctly
  vhost: fix to check the return value of copy_to/from_user() correctly
  vhost: Fix host panic if ioctl called with wrong index
  net: fix lock_sock_bh/unlock_sock_bh
  net/iucv: Add missing spin_unlock
  net: ll_temac: fix checksum offload logic
  net: ll_temac: fix interrupt bug when interrupt 0 is used
  sctp: dubious bitfields in sctp_transport
  ipmr: off by one in __ipmr_fill_mroute()
  ...

11 years agoFRV: ARCH_KMALLOC_MINALIGN was already defined
David Howells [Fri, 28 May 2010 09:41:16 +0000 (10:41 +0100)]
FRV: ARCH_KMALLOC_MINALIGN was already defined

ARCH_KMALLOC_MINALIGN was already defined in asm/mem-layout.h and so shouldn't
have been added to asm/cache.h as well, but rather altered in place.

The commit that added it to asm/cache.h was:

commit 69dcf3db03626c4f18de624e8632454ea12ff260
Author: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date:   Mon May 24 14:32:54 2010 -0700

    frv: set ARCH_KMALLOC_MINALIGN

    Architectures that handle DMA-non-coherent memory need to set
    ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is
    DMA-safe: the buffer doesn't share a cache with the others.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 28 May 2010 17:16:27 +0000 (10:16 -0700)]
Merge branch 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  posix_timer: Fix error path in timer_create
  hrtimer: Avoid double seqlock
  timers: Move local variable into else section
  timers: Fix slack calculation really

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Fri, 28 May 2010 17:07:48 +0000 (10:07 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  remove detritus left by "mm: make read_cache_page synchronous"
  fix fs/sysv s_dirt handling
  fat: convert to use the new truncate convention.
  ext2: convert to use the new truncate convention.
  tmpfs: convert to use the new truncate convention
  fs: convert simple fs to new truncate
  kill spurious reference to vmtruncate
  fs: introduce new truncate sequence
  fs/super: fix kernel-doc warning
  fs/minix: bugfix, number of indirect block ptrs per block depends on block size
  rename the generic fsync implementations
  drop unused dentry argument to ->fsync
  fs: Add missing mutex_unlock
  Fix racy use of anon_inode_getfd() in perf_event.c
  get rid of the magic around f_count in aio
  VFS: fix recent breakage of FS_REVAL_DOT
  Revert "anon_inode: set S_IFREG on the anon_inode"

11 years agoremove detritus left by "mm: make read_cache_page synchronous"
Al Viro [Fri, 28 May 2010 15:34:50 +0000 (11:34 -0400)]
remove detritus left by "mm: make read_cache_page synchronous"

gets minix get_dir_page() in sync with its analogs; back in 2007
Nick has switched read_cache_page() and friends to sync behaviour
(i.e.  they wait for the page to get unlocked, check if it's uptodate
and if it isn't return ERR_PTR(-EIO) instead) and removed the
duplicate logics from the callers.  In case of fs/minix/dir.c he'd
removed only half of that...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agonetlink: bug fix: wrong size was calculated for vfinfo list blob
Scott Feldman [Fri, 28 May 2010 10:42:43 +0000 (03:42 -0700)]
netlink: bug fix: wrong size was calculated for vfinfo list blob

The wrong size was being calculated for vfinfo.  In one case, it was over-
calculating using nlmsg_total_size on attrs, in another case, it was
under-calculating by assuming ifla_vf_* structs are packed together, but
each struct is it's own attr w/ hdr (and padding).

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonetlink: bug fix: don't overrun skbs on vf_port dump
Scott Feldman [Fri, 28 May 2010 10:42:18 +0000 (03:42 -0700)]
netlink: bug fix: don't overrun skbs on vf_port dump

Noticed by Patrick McHardy: was continuing to fill skb after a
nla_put_failure, ignoring the size calculated by upper layer.  Now,
return -EMSGSIZE on any overruns, but also allow netdev to
fail ndo_get_vf_port with error other than -EMSGSIZE, thus unwinding
nest.

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoxt_tee: use skb_dst_drop()
Eric Dumazet [Fri, 28 May 2010 10:41:17 +0000 (03:41 -0700)]
xt_tee: use skb_dst_drop()

After commit 7fee226a (net: add a noref bit on skb dst), its wrong to
use : dst_release(skb_dst(skb)), since we could decrement a refcount
while skb dst was not refcounted.

We should use skb_dst_drop(skb) instead.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonetdev/fec: fix ifconfig eth0 down hang issue
Bryan Wu [Fri, 28 May 2010 10:40:39 +0000 (03:40 -0700)]
netdev/fec: fix ifconfig eth0 down hang issue

BugLink: http://bugs.launchpad.net/bugs/559065
In fec open/close function, we need to use phy_connect and phy_disconnect
operation before we start/stop phy. Otherwise it will cause system hang.

Only call fec_enet_mii_probe() in open function, because the first open
action will cause NULL pointer error.

Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoARM: S5PV210: serial: Fix section mismatch warning
Marek Szyprowski [Fri, 28 May 2010 10:21:11 +0000 (19:21 +0900)]
ARM: S5PV210: serial: Fix section mismatch warning

Rename the structure to avoid the following warning:

WARNING: drivers/serial/built-in.o(.data+0x534): Section mismatch in reference from the variable s5p_serial_drv to the function .devexit.text:s3c24xx_serial_remove()
The variable s5p_serial_drv references
the function __devexit s3c24xx_serial_remove()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
11 years agoARM: Merge for-2635/defconfig3
Ben Dooks [Fri, 28 May 2010 10:34:02 +0000 (19:34 +0900)]
ARM: Merge for-2635/defconfig3

Merge branch 'for-2635/defconfig3' into for-linus/2635-updates

11 years agoARM: s3c2410_defconfig: Add new machines
Ben Dooks [Fri, 28 May 2010 10:28:06 +0000 (19:28 +0900)]
ARM: s3c2410_defconfig: Add new machines

Add the SMDK2416, and the GTA02 to the list of machines
that are included in the s3c2410_defconfig.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
11 years agoARM: s3c6400_defconfig: Add framebuffer and basic LCD
Ben Dooks [Fri, 28 May 2010 09:42:35 +0000 (18:42 +0900)]
ARM: s3c6400_defconfig: Add framebuffer and basic LCD

Add the framebuffer driver and some basic LCD configurations
that should be suitable for the SMDK boards.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
11 years agoARM: s3c6400_defconfig: Add RTC driver support
Ben Dooks [Fri, 28 May 2010 09:39:10 +0000 (18:39 +0900)]
ARM: s3c6400_defconfig: Add RTC driver support

Now that the RTC driver supports the S3C64XX, enable
it in the build.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
11 years agoARM: s3c6400_defconfig: Enable USB host side
Ben Dooks [Fri, 28 May 2010 09:36:25 +0000 (18:36 +0900)]
ARM: s3c6400_defconfig: Enable USB host side

Enable the USB Host side by adding the USB OHCI and
some basic USB driver modules.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
11 years agoARM: s3c6400_defconfig: Add SPI driver
Ben Dooks [Fri, 28 May 2010 09:26:23 +0000 (18:26 +0900)]
ARM: s3c6400_defconfig: Add SPI driver

The SPI driver was added last kernel round, so enable
the core SPI and add the 64XX and bitbang driver as
modules.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
11 years agoARM: s3c6400_defconfig: Update compiled machines
Ben Dooks [Fri, 28 May 2010 10:08:45 +0000 (19:08 +0900)]
ARM: s3c6400_defconfig: Update compiled machines

Add the machines that have been added in the last round
to the list of builds.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
11 years agoARM: S5P: Regoster clk_xusbxti clock for hsotg driver
Thomas Abraham [Fri, 28 May 2010 02:41:16 +0000 (11:41 +0900)]
ARM: S5P: Regoster clk_xusbxti clock for hsotg driver

The clk_xusbxti clock is added to the list of clocks to be
registred during boot time clock registration.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
[ben-linux@fluff.org: edited title]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
11 years agoARM: S3C64XX: Add USB OTG HCLK to the list of clocks
Thomas Abraham [Fri, 28 May 2010 02:41:14 +0000 (11:41 +0900)]
ARM: S3C64XX: Add USB OTG HCLK to the list of clocks

Add the USB OTG HCLK clock to the list of clocks to be registered
during initialization.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
11 years agoARM: SAMSUNG: gpio-cfg.h: update documentation
Ben Dooks [Mon, 24 May 2010 03:21:40 +0000 (12:21 +0900)]
ARM: SAMSUNG: gpio-cfg.h: update documentation

Update the documentation on the gpio configuration calls to add more
references to useful information and also to document the values that
are passed.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
11 years agoARM: SAMSUNG: Documentation: add documentation on GPIO code
Ben Dooks [Mon, 24 May 2010 03:13:30 +0000 (12:13 +0900)]
ARM: SAMSUNG: Documentation: add documentation on GPIO code

Add some documentation in Documentation/arm/Samsung for the GPIO code
and where to look for the necessary functions. Update the S3C24XX case
as well.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
11 years agoARM: SAMSUNG: Fix documentation for s3c_gpio_cfgpin()
Ben Dooks [Mon, 24 May 2010 03:11:43 +0000 (12:11 +0900)]
ARM: SAMSUNG: Fix documentation for s3c_gpio_cfgpin()

Fix typo in s3c_gpio_cfgpin() documentation, the second argument is @to
not @pin again.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
11 years agoARM: S3C24XX: Documentation: add section on gpiolib changes
Ben Dooks [Mon, 24 May 2010 02:23:53 +0000 (11:23 +0900)]
ARM: S3C24XX: Documentation: add section on gpiolib changes

Add section to the S3C24XX GPIO documentation on the recent changes
to move towards gpiolib integration.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
11 years agoARM: S3C24XX: Documentation: update GPIO documentation
Ben Dooks [Mon, 24 May 2010 02:11:50 +0000 (11:11 +0900)]
ARM: S3C24XX: Documentation: update GPIO documentation

Upate the S3C24XX GPIO documentation after the changes for gpiolib
and show which calls are being replaced by gpiolib or the new s3c
generic calls.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
11 years agoARM: S3C24XX: Documentation: update documentation overview
Ben Dooks [Mon, 24 May 2010 01:53:06 +0000 (10:53 +0900)]
ARM: S3C24XX: Documentation: update documentation overview

Add the two new SoCs added in this release cycle and update the notes
on the gpiolib conversion.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
11 years agoARM: SAMSUNG: Documentation: update directory layout
Ben Dooks [Mon, 24 May 2010 01:48:02 +0000 (10:48 +0900)]
ARM: SAMSUNG: Documentation: update directory layout

Update the directory layout in Documentation/arm/Samsung/Overview.txt
to reflect the changes that have been made in the latest kernel
updates.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
11 years agoARM: SAMSUNG: Documentation: update the list of SoCs supported
Ben Dooks [Mon, 24 May 2010 01:33:50 +0000 (10:33 +0900)]
ARM: SAMSUNG: Documentation: update the list of SoCs supported

Update the list of SoCs supported for the plat-s5p range.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
11 years agocnic: Fix context memory init. on 5709.
Michael Chan [Thu, 27 May 2010 23:31:41 +0000 (16:31 -0700)]
cnic: Fix context memory init. on 5709.

We need to zero context memory on 5709 in the function cnic_init_context().
Without this, iscsid restart on 5709 will not work because of stale data.
TX context blocks should not be initialized by cnic_init_context() because
of the special remapping on 5709.

Update version to 2.1.2.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodrivers/net: Eliminate a NULL pointer dereference
Julia Lawall [Thu, 27 May 2010 23:30:03 +0000 (16:30 -0700)]
drivers/net: Eliminate a NULL pointer dereference

At the point of the print, dev is NULL.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression E,E1;
identifier f;
statement S1,S2,S3;
@@

if ((E == NULL && ...) || ...)
{
  ... when != if (...) S1 else S2
      when != E = E1
* E->f
  ... when any
  return ...;
}
else S3
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodrivers/net/hamradio: Eliminate a NULL pointer dereference
Julia Lawall [Thu, 27 May 2010 23:29:05 +0000 (16:29 -0700)]
drivers/net/hamradio: Eliminate a NULL pointer dereference

At the point of the print, dev is NULL.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression E,E1;
identifier f;
statement S1,S2,S3;
@@

if ((E == NULL && ...) || ...)
{
  ... when != if (...) S1 else S2
      when != E = E1
* E->f
  ... when any
  return ...;
}
else S3
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobe2net: Patch removes redundant while statement in loop.
Sarveshwar Bandi [Thu, 27 May 2010 23:28:15 +0000 (16:28 -0700)]
be2net: Patch removes redundant while statement in loop.

Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoipv6: Add GSO support on forwarding path
Herbert Xu [Thu, 27 May 2010 23:14:30 +0000 (16:14 -0700)]
ipv6: Add GSO support on forwarding path

Currently we disallow GSO packets on the IPv6 forward path.
This patch fixes this.

Note that I discovered that our existing GSO MTU checks (e.g.,
IPv4 forwarding) are buggy in that they skip the check altogether,
when they really should be checking gso_size + header instead.

I have also been lazy here in that I haven't bothered to segment
the GSO packet by hand before generating an ICMP message.  Someone
should add that to be 100% correct.

Reported-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: fix __neigh_event_send()
Eric Dumazet [Thu, 27 May 2010 23:09:39 +0000 (16:09 -0700)]
net: fix __neigh_event_send()

commit 7fee226ad23 (net: add a noref bit on skb dst) missed one spot
where an skb is enqueued, with a possibly not refcounted dst entry.

__neigh_event_send() inserts skb into arp_queue, so we must make sure
dst entry is refcounted, or dst entry can be freed by garbage collector
after caller exits from rcu protected section.

Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agofix fs/sysv s_dirt handling
Al Viro [Thu, 27 May 2010 13:04:07 +0000 (09:04 -0400)]
fix fs/sysv s_dirt handling

got broken on ->sync_fs() conversion a year ago, nobody noticed...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agofat: convert to use the new truncate convention.
npiggin@suse.de [Wed, 26 May 2010 15:05:38 +0000 (01:05 +1000)]
fat: convert to use the new truncate convention.

Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoext2: convert to use the new truncate convention.
npiggin@suse.de [Wed, 26 May 2010 15:05:37 +0000 (01:05 +1000)]
ext2: convert to use the new truncate convention.

I also have commented a possible bug in existing ext2 code, marked with XXX.

Cc: linux-ext4@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agotmpfs: convert to use the new truncate convention
npiggin@suse.de [Wed, 26 May 2010 15:05:36 +0000 (01:05 +1000)]
tmpfs: convert to use the new truncate convention

Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agofs: convert simple fs to new truncate
Nick Piggin [Thu, 27 May 2010 12:42:19 +0000 (22:42 +1000)]
fs: convert simple fs to new truncate

Convert simple filesystems: ramfs, configfs, sysfs, block_dev to new truncate
sequence.

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agokill spurious reference to vmtruncate
npiggin@suse.de [Wed, 26 May 2010 15:05:34 +0000 (01:05 +1000)]
kill spurious reference to vmtruncate

Lots of filesystems calls vmtruncate despite not implementing the old
->truncate method.  Switch them to use simple_setsize and add some
comments about the truncate code where it seems fitting.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agofs: introduce new truncate sequence
npiggin@suse.de [Wed, 26 May 2010 15:05:33 +0000 (01:05 +1000)]
fs: introduce new truncate sequence

Introduce a new truncate calling sequence into fs/mm subsystems. Rather than
setattr > vmtruncate > truncate, have filesystems call their truncate sequence
from ->setattr if filesystem specific operations are required. vmtruncate is
deprecated, and truncate_pagecache and inode_newsize_ok helpers introduced
previously should be used.

simple_setattr is introduced for simple in-ram filesystems to implement
the new truncate sequence. Eventually all filesystems should be converted
to implement a setattr, and the default code in notify_change should go
away.

simple_setsize is also introduced to perform just the ATTR_SIZE portion
of simple_setattr (ie. changing i_size and trimming pagecache).

To implement the new truncate sequence:
- filesystem specific manipulations (eg freeing blocks) must be done in
  the setattr method rather than ->truncate.
- vmtruncate can not be used by core code to trim blocks past i_size in
  the event of write failure after allocation, so this must be performed
  in the fs code.
- convert usage of helpers block_write_begin, nobh_write_begin,
  cont_write_begin, and *blockdev_direct_IO* to use _newtrunc postfixed
  variants. These avoid calling vmtruncate to trim blocks (see previous).
- inode_setattr should not be used. generic_setattr is a new function
  to be used to copy simple attributes into the generic inode.
- make use of the better opportunity to handle errors with the new sequence.

Big problem with the previous calling sequence: the filesystem is not called
until i_size has already changed.  This means it is not allowed to fail the
call, and also it does not know what the previous i_size was. Also, generic
code calling vmtruncate to truncate allocated blocks in case of error had
no good way to return a meaningful error (or, for example, atomically handle
block deallocation).

Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agofs/super: fix kernel-doc warning
Randy Dunlap [Tue, 25 May 2010 05:22:34 +0000 (22:22 -0700)]
fs/super: fix kernel-doc warning

Fix fs/super.c kernel-doc warning and function notation:
Warning(fs/super.c:957): No description found for parameter 'sb'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agofs/minix: bugfix, number of indirect block ptrs per block depends on block size
Erik van der Kouwe [Wed, 26 May 2010 10:03:23 +0000 (12:03 +0200)]
fs/minix: bugfix, number of indirect block ptrs per block depends on block size

The MINIX filesystem driver used a constant number of indirect block
pointers in an indirect block. This worked only for filesystems with 1kb
block, while the MINIX default block size is now 4kb. As a consequence,
large files were read incorrectly on such filesystems and writing a
large file would cause the filesystem to become corrupted. This patch
computes the number of indirect block pointers based on the block size,
making the driver work for each block size.

I would like to thank Feiran Zheng ('Fam') for pointing out the cause
of the corruption.

Signed-off-by: Erik van der Kouwe <vdkouwe@cs.vu.nl>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agorename the generic fsync implementations
Christoph Hellwig [Wed, 26 May 2010 15:53:41 +0000 (17:53 +0200)]
rename the generic fsync implementations

We don't name our generic fsync implementations very well currently.
The no-op implementation for in-memory filesystems currently is called
simple_sync_file which doesn't make too much sense to start with,
the the generic one for simple filesystems is called simple_fsync
which can lead to some confusion.

This patch renames the generic file fsync method to generic_file_fsync
to match the other generic_file_* routines it is supposed to be used
with, and the no-op implementation to noop_fsync to make it obvious
what to expect.  In addition add some documentation for both methods.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agodrop unused dentry argument to ->fsync
Christoph Hellwig [Wed, 26 May 2010 15:53:25 +0000 (17:53 +0200)]
drop unused dentry argument to ->fsync

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agofs: Add missing mutex_unlock
Julia Lawall [Wed, 26 May 2010 15:54:39 +0000 (17:54 +0200)]
fs: Add missing mutex_unlock

Add a mutex_unlock missing on the error path.  At other exists from the
function that return an error flag, the mutex is unlocked, so do the same
here.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression E1;
@@

* mutex_lock(E1,...);
  <+... when != E1
  if (...) {
    ... when != E1
*   return ...;
  }
  ...+>
* mutex_unlock(E1,...);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoFix racy use of anon_inode_getfd() in perf_event.c
Al Viro [Wed, 26 May 2010 21:40:29 +0000 (17:40 -0400)]
Fix racy use of anon_inode_getfd() in perf_event.c

once anon_inode_getfd() is called, you can't expect *anything* about
struct file that descriptor points to - another thread might be doing
whatever it likes with descriptor table at that point.

Cc: stable <stable@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoget rid of the magic around f_count in aio
Al Viro [Wed, 26 May 2010 19:13:55 +0000 (15:13 -0400)]
get rid of the magic around f_count in aio

__aio_put_req() plays sick games with file refcount.  What
it wants is fput() from atomic context; it's almost always
done with f_count > 1, so they only have to deal with delayed
work in rare cases when their reference happens to be the
last one.  Current code decrements f_count and if it hasn't
hit 0, everything is fine.  Otherwise it keeps a pointer
to struct file (with zero f_count!) around and has delayed
work do __fput() on it.

Better way to do it: use atomic_long_add_unless( , -1, 1)
instead of !atomic_long_dec_and_test().  IOW, decrement it
only if it's not the last reference, leave refcount alone
if it was.  And use normal fput() in delayed work.

I've made that atomic_long_add_unless call a new helper -
fput_atomic().  Drops a reference to file if it's safe to
do in atomic (i.e. if that's not the last one), tells if
it had been able to do that.  aio.c converted to it, __fput()
use is gone.  req->ki_file *always* contributes to refcount
now.  And __fput() became static.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoVFS: fix recent breakage of FS_REVAL_DOT
Neil Brown [Mon, 24 May 2010 06:57:56 +0000 (16:57 +1000)]
VFS: fix recent breakage of FS_REVAL_DOT

Commit 1f36f774b22a0ceb7dd33eca626746c81a97b6a5 broke FS_REVAL_DOT semantics.

In particular, before this patch, the command
   ls -l
in an NFS mounted directory would always check if the directory on the server
had changed and if so would flush and refill the pagecache for the dir.
After this patch, the same "ls -l" will repeatedly return stale date until
the cached attributes for the directory time out.

The following patch fixes this by ensuring the d_revalidate is called by
do_last when "." is being looked-up.
link_path_walk has already called d_revalidate, but in that case LOOKUP_OPEN
is not set so nfs_lookup_verify_inode chooses not to do any validation.

The following patch restores the original behaviour.

Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
11 years agoRevert "anon_inode: set S_IFREG on the anon_inode"
Al Viro [Thu, 27 May 2010 15:11:06 +0000 (11:11 -0400)]
Revert "anon_inode: set S_IFREG on the anon_inode"

This reverts commit a7cf4145bb86aaf85d4d4d29a69b50b688e2e49d.

11 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Fri, 28 May 2010 01:34:58 +0000 (18:34 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: implement dump_id force param
  libata: disable ATAPI AN by default
  libata-sff: make BMDMA optional
  libata-sff: kill dummy BMDMA ops from sata_qstor and pata_octeon_cf
  libata-sff: separate out BMDMA init
  libata-sff: separate out BMDMA irq handler
  libata-sff: ata_sff_irq_clear() is BMDMA specific
  sata_mv: drop unncessary EH callback resetting

11 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Fri, 28 May 2010 00:46:47 +0000 (17:46 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix build breakage

11 years ago[IA64] Fix build breakage
Tony Luck [Thu, 27 May 2010 22:35:13 +0000 (15:35 -0700)]
[IA64] Fix build breakage

In commit 0ac0c0d0f837c499afd02a802f9cf52d3027fa3b
cpusets: randomize node rotor used in cpuset_mem_spread_node()

Jack Steiner fixed a problem with too many small tasks being
assigned to node 0. Copy his code to ia64 to avoid build error.

    arch/ia64/kernel/smpboot.c:641: error: ‘cpu_to_node_map’ undeclared (first use in this function)

In commit 3bccd996276b108c138e8176793a26ecef54d573
numa: ia64: use generic percpu var numa_node_id() implementation

Lee Schermerhorn added some set_numa_node() calls - but these
only work on CONFIG_NUMA=y configurations. Surround the calls
with #ifdef CONFIG_NUMA

Signed-off-by: Tony Luck <tony.luck@intel.com>
11 years agoMerge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 27 May 2010 22:23:47 +0000 (15:23 -0700)]
Merge branch 'perf-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (61 commits)
  tracing: Add __used annotation to event variable
  perf, trace: Fix !x86 build bug
  perf report: Support multiple events on the TUI
  perf annotate: Fix up usage of the build id cache
  x86/mmiotrace: Remove redundant instruction prefix checks
  perf annotate: Add TUI interface
  perf tui: Remove annotate from popup menu after failure
  perf report: Don't start the TUI if -D is used
  perf: Fix getline undeclared
  perf: Optimize perf_tp_event_match()
  perf: Remove more code from the fastpath
  perf: Optimize the !vmalloc backed buffer
  perf: Optimize perf_output_copy()
  perf: Fix wakeup storm for RO mmap()s
  perf-record: Share per-cpu buffers
  perf-record: Remove -M
  perf: Ensure that IOC_OUTPUT isn't used to create multi-writer buffers
  perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to track events
  perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction
  perf tui: Allow disabling the TUI on a per command basis in ~/.perfconfig
  ...

11 years agoposix_timer: Fix error path in timer_create
Andrey Vagin [Mon, 24 May 2010 19:15:33 +0000 (12:15 -0700)]
posix_timer: Fix error path in timer_create

Move CLOCK_DISPATCH(which_clock, timer_create, (new_timer)) after all
posible EFAULT erros.

*_timer_create may allocate/get resources.
(for example posix_cpu_timer_create does get_task_struct)

[ tglx: fold the remove crappy comment patch into this ]

Signed-off-by: Andrey Vagin <avagin@openvz.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: <stable@kernel.org>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
11 years agoMerge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight
Linus Torvalds [Thu, 27 May 2010 18:34:55 +0000 (11:34 -0700)]
Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  gta02: Use pcf50633 backlight driver instead of platform backlight driver.
  backlight: pcf50633: Register a pcf50633-backlight device in pcf50633 core driver.
  backlight: Add pcf50633 backlight driver
  backlight: 88pm860x_bl: fix error handling in pm860x_backlight_probe
  backlight: max8925_bl: Fix error handling path
  backlight: l4f00242t03: fix error handling in l4f00242t03_probe
  backlight: add S6E63M0 AMOLED LCD Panel driver
  backlight: adp8860: add support for ADP8861 & ADP8863
  backlight: mbp_nvidia_bl - Fix DMI_SYS_VENDOR for MacBook1,1
  backlight: Add Cirrus EP93xx backlight driver
  backlight: l4f00242t03: Fix regulators handling code in remove function
  backlight: fix adp8860_bl build errors
  backlight: new driver for the ADP8860 backlight parts
  backlight: 88pm860x_bl - potential memory leak
  backlight: mbp_nvidia_bl - add support for older MacBookPro and MacBook 6,1.
  backlight: Kconfig cleanup
  backlight: backlight_device_register() return ERR_PTR()

11 years agoMerge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds
Linus Torvalds [Thu, 27 May 2010 18:34:20 +0000 (11:34 -0700)]
Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: Add mx31moboard MC13783 led support
  leds: Add mc13783 LED support
  leds: leds-ss4200: fix led_classdev_unregister twice in error handling
  leds: leds-lp3944: properly handle lp3944_configure fail in lp3944_probe
  leds: led-class: set permissions on max_brightness file to 0444
  leds: leds-gpio: Change blink_set callback to be able to turn off blinking
  leds: Add LED driver for the Soekris net5501 board
  leds: 88pm860x - fix checking in probe function

11 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelv...
Linus Torvalds [Thu, 27 May 2010 18:33:46 +0000 (11:33 -0700)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (23 commits)
  hwmon: (lm75) Add support for the Texas Instruments TMP105
  hwmon: (ltc4245) Read only one GPIO pin
  hwmon: (dme1737) Add SCH5127 support
  hwmon: (tmp102) Don't always stop chip at exit
  hwmon: (tmp102) Fix suspend and resume functions
  hwmon: (tmp102) Various fixes
  hwmon: Driver for TI TMP102 temperature sensor
  hwmon: EMC1403 thermal sensor support
  hwmon: (applesmc) Add temperature sensor labels to sysfs interface
  hwmon: (applesmc) Add generic support for MacBook Pro 7
  hwmon: (applesmc) Add generic support for MacBook Pro 6
  hwmon: (applesmc) Add support for MacBook Pro 5,3 and 5,4
  hwmon: (tmp401) Reorganize code to get rid of static forward declarations
  hwmon: (tmp401) Use constants for sysfs file permissions
  hwmon: (adm1031) Allow setting update rate
  hwmon: Add description of the update_rate sysfs attribute
  hwmon: (lm90) Use programmed update rate
  hwmon: (f71882fg) Acquire I/O regions while we're working with them
  hwmon: (f71882fg) Code cleanup
  hwmon: (f71882fg) Use strict_stro(l|ul) instead of simple_strto$1
  ...

11 years agohwmon: (lm75) Add support for the Texas Instruments TMP105
Shubhrajyoti Datta [Thu, 27 May 2010 17:59:03 +0000 (19:59 +0200)]
hwmon: (lm75) Add support for the Texas Instruments TMP105

Add support for the Texas Instruments TMP105 temperature sensor
device.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti@ti.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agohwmon: (ltc4245) Read only one GPIO pin
Ira W. Snyder [Thu, 27 May 2010 17:59:02 +0000 (19:59 +0200)]
hwmon: (ltc4245) Read only one GPIO pin

Read only one of the GPIO pins as an analog voltage. The ADC can be
switched to a different GPIO pin at runtime, but this is not supported.

Previously, this driver would report the analog voltage of the currently
selected GPIO pin as all three GPIO voltages: in9_input, in10_input and
in11_input.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
11 years agohwmon: (dme1737) Add SCH5127 support
Juerg Haefliger [Thu, 27 May 2010 17:59:01 +0000 (19:59 +0200)]
hwmon: (dme1737) Add SCH5127 support

Add support for the hardware monitoring capabilities of the SCH5127
chip to the dme1737 driver.

Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Jeff Rickman <jrickman@myamigos.us>
11 years agohwmon: (tmp102) Don't always stop chip at exit
Jean Delvare [Thu, 27 May 2010 17:58:59 +0000 (19:58 +0200)]
hwmon: (tmp102) Don't always stop chip at exit

Only stop the chip at driver exit if it was stopped when driver was
loaded. Leave it running otherwise.

Also restore the device configuration if probe failed, to not leave
the system in a dangling state.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Steven King <sfking@fdwdc.com>
11 years agohwmon: (tmp102) Fix suspend and resume functions
Jean Delvare [Thu, 27 May 2010 17:58:58 +0000 (19:58 +0200)]
hwmon: (tmp102) Fix suspend and resume functions

Suspend and resume functions shouldn't overwrite the configuration
register. They should only alter the one bit they have to touch.

Also don't assume that register reads and writes always succeed.
Handle errors properly, shall they happen.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Steven King <sfking@fdwdc.com>
11 years agohwmon: (tmp102) Various fixes
Jean Delvare [Thu, 27 May 2010 17:58:57 +0000 (19:58 +0200)]
hwmon: (tmp102) Various fixes

Fixes from my driver review:
http://lists.lm-sensors.org/pipermail/lm-sensors/2010-March/028051.html

Only the small changes are in there, more important changes will come
later separately as time permits.

* Drop the remnants of the now gone detect function
* The TMP102 has no known compatible chip
* Include the right header files
* Clarify why byte swapping of register values is needed
* Strip resolution info bit from temperature register value
* Set cache lifetime to 1/3 second
* Don't arbitrarily reject limit values; clamp as needed
* Make limit writing unconditional
* Don't check for transaction types the driver doesn't use
* Properly check for error when setting configuration
* Report error on failed probe
* Make the driver load automatically where needed
* Various other minor fixes

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Steven King <sfking@fdwdc.com>
11 years agohwmon: Driver for TI TMP102 temperature sensor
Steven King [Thu, 27 May 2010 17:58:56 +0000 (19:58 +0200)]
hwmon: Driver for TI TMP102 temperature sensor

Driver for the TI TMP102.

The TI TMP102 is similar to the LM75.  It differs from the LM75 by
having a 16-bit conf register and the temp registers have a minimum
resolution of 12 bits; the extended conf register can select 13-bit
resolution (which this driver does) and also change the update rate
(which this driver currently doesn't use).

[JD: Fix tmp102_exit tag, must be __exit, not __init.]

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agohwmon: EMC1403 thermal sensor support
Kalhan Trisal [Thu, 27 May 2010 17:58:56 +0000 (19:58 +0200)]
hwmon: EMC1403 thermal sensor support

Provides support for the EMC1403 thermal sensor. Only reporting of values
is supported. The various Moorestown specific extras to do with thermal
alerts and the like are not in this version of the driver.

Considerably edited and tidied up by Alan Cox, plus fixes and detection
bits from Jean Delvare.

Signed-off-by: Kalhan Trisal <kalhan.trisal@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agohwmon: (applesmc) Add temperature sensor labels to sysfs interface
Alex Murray [Thu, 27 May 2010 17:58:54 +0000 (19:58 +0200)]
hwmon: (applesmc) Add temperature sensor labels to sysfs interface

The Apple SMC uses a systematic labeling scheme for the hardware
temperature sensors. This scheme is currently hidden from
userland. Since the sensor set, and consequently the numbering,
differs between models, an extensive database of configurations is
required for an application such as fan control. This patch adds the
SMC labels to the hwmon sysfs interface, allowing applications to use
the sensors more intelligibly.

[rydberg@euromail.se: fixed error handling]
Signed-off-by: Alex Murray <murray.alex@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agohwmon: (applesmc) Add generic support for MacBook Pro 7
Henrik Rydberg [Thu, 27 May 2010 17:58:53 +0000 (19:58 +0200)]
hwmon: (applesmc) Add generic support for MacBook Pro 7

This patch adds generic support for the MacBook Pro 7 family
based on the 7,1 model.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agohwmon: (applesmc) Add generic support for MacBook Pro 6
Bernhard Froemel [Thu, 27 May 2010 17:58:52 +0000 (19:58 +0200)]
hwmon: (applesmc) Add generic support for MacBook Pro 6

This patch adds generic support for the MacBook Pro 6 family
based on the 6,2 model.

[rydberg@euromail.se: patch cleanup]
Signed-off-by: Bernhard Froemel <froemel@vmars.tuwien.ac.at>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agohwmon: (applesmc) Add support for MacBook Pro 5,3 and 5,4
Henrik Rydberg [Thu, 27 May 2010 17:58:50 +0000 (19:58 +0200)]
hwmon: (applesmc) Add support for MacBook Pro 5,3 and 5,4

The MacBookPro 5,3 model has two fans, whereas the 5,4 model has
only one. This patch adds explicit support for the 5,3 and 5,4 models.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agohwmon: (tmp401) Reorganize code to get rid of static forward declarations
Andre Prendel [Thu, 27 May 2010 17:58:49 +0000 (19:58 +0200)]
hwmon: (tmp401) Reorganize code to get rid of static forward declarations

Signed-off-by: Andre Prendel <andre.prendel@gmx.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agohwmon: (tmp401) Use constants for sysfs file permissions
Andre Prendel [Thu, 27 May 2010 17:58:48 +0000 (19:58 +0200)]
hwmon: (tmp401) Use constants for sysfs file permissions

Replace octal representation of file permissions by the corresponding
constants.

Signed-off-by: Andre Prendel <andre.prendel@gmx.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agohwmon: (adm1031) Allow setting update rate
Jean Delvare [Thu, 27 May 2010 17:58:46 +0000 (19:58 +0200)]
hwmon: (adm1031) Allow setting update rate

Based on earlier work by Ira W. Snyder.

The adm1031 chip is capable of using a runtime configurable sampling rate,
using the fan filter register. Add support for reading and setting the
update rate via sysfs.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Ira W. Snyder <iws@ovro.caltech.edu>
11 years agohwmon: Add description of the update_rate sysfs attribute
Ira W. Snyder [Thu, 27 May 2010 17:58:45 +0000 (19:58 +0200)]
hwmon: Add description of the update_rate sysfs attribute

The update_rate attribute can be used by drivers to let userspace choose
the update rate of the chip, if it is configurable.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agohwmon: (lm90) Use programmed update rate
Ira W. Snyder [Thu, 27 May 2010 17:58:44 +0000 (19:58 +0200)]
hwmon: (lm90) Use programmed update rate

The lm90 driver programs the sensor chip to update its readings at 2 Hz
(500 ms between readings). However, the driver only does reads from the
chip at intervals of 2 * HZ (2000 ms between readings). Change the driver
update rate to the programmed update rate.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agohwmon: (f71882fg) Acquire I/O regions while we're working with them
Giel van Schijndel [Thu, 27 May 2010 17:58:43 +0000 (19:58 +0200)]
hwmon: (f71882fg) Acquire I/O regions while we're working with them

Acquire the I/O region for the Super I/O chip while we're working on it.

Signed-off-by: Giel van Schijndel <me@mortis.eu>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agohwmon: (f71882fg) Code cleanup
Giel van Schijndel [Thu, 27 May 2010 17:58:42 +0000 (19:58 +0200)]
hwmon: (f71882fg) Code cleanup

Some code cleanup: properly use previously defined functions, rather
than duplicating their code.

Signed-off-by: Giel van Schijndel <me@mortis.eu>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agohwmon: (f71882fg) Use strict_stro(l|ul) instead of simple_strto$1
Giel van Schijndel [Thu, 27 May 2010 17:58:41 +0000 (19:58 +0200)]
hwmon: (f71882fg) Use strict_stro(l|ul) instead of simple_strto$1

Use the strict_strol and strict_stroul functions instead of simple_strol
and simple_stroul respectively in sysfs functions.

Signed-off-by: Giel van Schijndel <me@mortis.eu>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agohwmon: (f71882fg) Fixed braces coding style issues
Giel van Schijndel [Thu, 27 May 2010 17:58:40 +0000 (19:58 +0200)]
hwmon: (f71882fg) Fixed braces coding style issues

Fixed several coding style issues.

Signed-off-by: Giel van Schijndel <me@mortis.eu>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agohwmon: (lm63) Add basic support for LM64
Matthew Garrett [Thu, 27 May 2010 17:58:38 +0000 (19:58 +0200)]
hwmon: (lm63) Add basic support for LM64

The LM64 appears to be an LM63 with added GPIO lines. Add support for the
hwmon functionality - GPIO can be added at some later stage if someone
has a need for them.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
11 years agohwmon: (asus_atk0110) Don't load if ACPI resources aren't enforced
Jean Delvare [Thu, 27 May 2010 17:58:37 +0000 (19:58 +0200)]
hwmon: (asus_atk0110) Don't load if ACPI resources aren't enforced

When the user passes the kernel parameter acpi_enforce_resources=lax,
the ACPI resources are no longer protected, so a native driver can
make use of them. In that case, we do not want the asus_atk0110 to be
loaded. Unfortunately, this driver loads automatically due to its
MODULE_DEVICE_TABLE, so the user ends up with two drivers loaded for
the same device - this is bad.

So I suggest that we prevent the asus_atk0110 driver from loading if
acpi_enforce_resources=lax.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Luca Tettamanti <kronos.it@gmail.com>
Cc: Len Brown <lenb@kernel.org>
11 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Thu, 27 May 2010 17:48:46 +0000 (10:48 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] fill out file list in s390 MAINTAINERS entry
  [S390] Add support for LZO-compressed kernels.
  [S390] cmm: get rid of CMM_PROC config option
  [S390] cmm: remove superfluous EXPORT_SYMBOLs plus cleanups
  [S390] dasd: unit check handling during internal cio I/O
  [S390] cio: unit check handling during internal I/O
  [S390] ccwgroup: add locking around drvdata access
  [S390] cio: remove stsch
  [S390] spp: remove KVM_AWARE_CMF config option
  [S390] kprobes: forbid probing of stnsm/stosm/epsw
  [S390] spp: fix compilation for CONFIG_32BIT
  [S390] atomic: implement atomic64_dec_if_positive
  [S390] cmm: fix crash on module unload

11 years agoMerge branch 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb...
Linus Torvalds [Thu, 27 May 2010 17:47:41 +0000 (10:47 -0700)]
Merge branch 'sfi-release' of git://git./linux/kernel/git/lenb/linux-sfi-2.6

* 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6:
  SFI: add sysfs interface for SFI tables.
  SFI: add support for v0.81 spec

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
Linus Torvalds [Thu, 27 May 2010 17:43:44 +0000 (10:43 -0700)]
Merge git://git./linux/kernel/git/mason/btrfs-unstable

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (27 commits)
  Btrfs: add more error checking to btrfs_dirty_inode
  Btrfs: allow unaligned DIO
  Btrfs: drop verbose enospc printk
  Btrfs: Fix block generation verification race
  Btrfs: fix preallocation and nodatacow checks in O_DIRECT
  Btrfs: avoid ENOSPC errors in btrfs_dirty_inode
  Btrfs: move O_DIRECT space reservation to btrfs_direct_IO
  Btrfs: rework O_DIRECT enospc handling
  Btrfs: use async helpers for DIO write checksumming
  Btrfs: don't walk around with task->state != TASK_RUNNING
  Btrfs: do aio_write instead of write
  Btrfs: add basic DIO read/write support
  direct-io: do not merge logically non-contiguous requests
  direct-io: add a hook for the fs to provide its own submit_bio function
  fs: allow short direct-io reads to be completed via buffered IO
  Btrfs: Metadata ENOSPC handling for balance
  Btrfs: Pre-allocate space for data relocation
  Btrfs: Metadata ENOSPC handling for tree log
  Btrfs: Metadata reservation for orphan inodes
  Btrfs: Introduce global metadata reservation
  ...

11 years agoAvoid warning when CPU hotplug isn't enabled
Linus Torvalds [Thu, 27 May 2010 17:32:08 +0000 (10:32 -0700)]
Avoid warning when CPU hotplug isn't enabled

Commit e9fb7631ebcd ("cpu-hotplug: introduce cpu_notify(),
__cpu_notify(), cpu_notify_nofail()") also introduced this annoying
warning:

  kernel/cpu.c:157: warning: 'cpu_notify_nofail' defined but not used

when CONFIG_HOTPLUG_CPU wasn't set.

So move that helper inside the #ifdef CONFIG_HOTPLUG_CPU region, and
simplify it while at it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
Linus Torvalds [Thu, 27 May 2010 17:28:11 +0000 (10:28 -0700)]
Merge git://git./linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6:
  [SCSI] fix race in scsi_target_reap
  [SCSI] aacraid: Eliminate use after free
  [SCSI] arcmsr: Support HW reset for EH and polling scheme for scsi device
  [SCSI] bfa: fix system crash when reading sysfs fc_host statistics
  [SCSI] iscsi_tcp: remove sk_sleep check
  [SCSI] ipr: improve interrupt service routine performance
  [SCSI] ipr: set the data list length in the request control block
  [SCSI] ipr: fix a register read to use the correct address for 64 bit adapters
  [SCSI] ipr: include the resource path in the IOA status area structure
  [SCSI] ipr: implement fixes for 64 bit adapter support
  [SCSI] be2iscsi: correct return value in mgmt_invalidate_icds()

11 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Thu, 27 May 2010 17:26:37 +0000 (10:26 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
  ext4: Make fsync sync new parent directories in no-journal mode
  ext4: Drop whitespace at end of lines
  ext4: Fix compat EXT4_IOC_ADD_GROUP
  ext4: Conditionally define compat ioctl numbers
  tracing: Convert more ext4 events to DEFINE_EVENT
  ext4: Add new tracepoints to track mballoc's buddy bitmap loads
  ext4: Add a missing trace hook
  ext4: restart ext4_ext_remove_space() after transaction restart
  ext4: Clear the EXT4_EOFBLOCKS_FL flag only when warranted
  ext4: Avoid crashing on NULL ptr dereference on a filesystem error
  ext4: Use bitops to read/modify i_flags in struct ext4_inode_info
  ext4: Convert calls of ext4_error() to EXT4_ERROR_INODE()
  ext4: Convert callers of ext4_get_blocks() to use ext4_map_blocks()
  ext4: Add new abstraction ext4_map_blocks() underneath ext4_get_blocks()
  ext4: Use our own write_cache_pages()
  ext4: Show journal_checksum option
  ext4: Fix for ext4_mb_collect_stats()
  ext4: check for a good block group before loading buddy pages
  ext4: Prevent creation of files larger than RLIMIT_FSIZE using fallocate
  ext4: Remove extraneous newlines in ext4_msg() calls
  ...

Fixed up trivial conflict in fs/ext4/fsync.c

11 years agoMerge branch 'for-linus/2634-git-updates' of git://git.fluff.org/bjdooks/linux
Linus Torvalds [Thu, 27 May 2010 17:23:57 +0000 (10:23 -0700)]
Merge branch 'for-linus/2634-git-updates' of git://git.fluff.org/bjdooks/linux

* 'for-linus/2634-git-updates' of git://git.fluff.org/bjdooks/linux:
  ARM: S5PC100: Fixup cross tree merge problems
  ARM: S5P: Fix the platform external interrupt issues.
  ARM: s5pv210_defconfig: Update s5pv210_defconfig to v2.6.34-git
  ARM: s5pc110_defconfig: Update s5pc110_defconfig to v2.6.34-git
  ARM: s5pc100_defconfig: Update s5pc100_defconfig to v2.6.34-git
  ARM: s5p6442_defconfig: Update s5p6442_defconfig to v2.6.34-git
  ARM: s5p6440_defconfig: Update s5p6440_defconfig to v2.6.34-git
  ARM: s3c6400_defconfig: Update s3c6400_defconfig to v2.6.34-git
  ARM: s3c2410_defconfig: Update s3c2410_defconfig to v2.6.34-git

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Thu, 27 May 2010 17:22:06 +0000 (10:22 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: schedule for removal
  firewire: core: use separate timeout for each transaction
  firewire: core: Fix tlabel exhaustion problem
  firewire: core: make transaction label allocation more robust
  firewire: core: clean up config ROM related defined constants
  ieee1394: mark char device files as not seekable
  firewire: cdev: mark char device files as not seekable
  firewire: ohci: cleanups and fix for nonstandard build without debug facility
  firewire: ohci: wait for PHY register accesses to complete
  firewire: ohci: fix up configuration of TI chips
  firewire: ohci: enable 1394a enhancements
  firewire: ohci: do not clear PHY interrupt status inadvertently
  firewire: ohci: add a function for reading PHY registers

Trivial conflicts in Documentation/feature-removal-schedule.txt

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux...
Linus Torvalds [Thu, 27 May 2010 17:19:19 +0000 (10:19 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/geert/linux-m68k

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (24 commits)
  m68k: amiga - RTC platform device conversion
  m68k: amiga - Parallel port platform device conversion
  m68k: amiga - Serial port platform device conversion
  m68k: amiga - Mouse platform device conversion
  m68k: amiga - Keyboard platform device conversion
  m68k: amiga - Amiga Gayle IDE platform device conversion
  m68k: amiga - A4000T SCSI platform device conversion
  m68k/scsi: a3000 - Do not use legacy Scsi_Host.base
  m68k: amiga - A3000 SCSI platform device conversion
  m68k/scsi: gvp11 - Do not use legacy Scsi_Host.base
  m68k: amiga - GVP Series II SCSI zorro_driver conversion
  m68k/scsi: a2091 - Do not use legacy Scsi_Host.base
  m68k: amiga - A2091/A590 SCSI zorro_driver conversion
  m68k/scsi: mvme147 - Kill obsolete HOSTS_C logic
  m68k/scsi: a3000 - Kill a3000_scsiregs typedef
  m68k/scsi: gvp11 - Kill gvp11_scsiregs typedef
  m68k/scsi: a2091 - Kill a2091_scsiregs typedef
  m68k/scsi: gvp11 - Extract check_wd33c93()
  m68k/scsi: a3000 - Kill static global a3000_host
  m68k/scsi: mvme147 - Kill static global mvme147_host
  ...

11 years agoMerge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Thu, 27 May 2010 17:18:44 +0000 (10:18 -0700)]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Fix another nfs_wb_page() deadlock
  NFS: Ensure that we mark the inode as dirty if we exit early from commit
  NFS: Fix a lock imbalance typo in nfs_access_cache_shrinker
  sunrpc: fix leak on error on socket xprt setup

11 years agoSFI: add sysfs interface for SFI tables.
Feng Tang [Wed, 26 May 2010 03:28:08 +0000 (11:28 +0800)]
SFI: add sysfs interface for SFI tables.

Analogous to ACPI's /sys/firmware/acpi/tables/...

create /sys/firmware/sfi/tables/

The tables are primariy for the kernel,
but sometimes it is useful for user-space to be
able to read them.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Thu, 27 May 2010 16:19:55 +0000 (09:19 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: usbtouchscreen - support bigger iNexio touchscreens
  Input: ads7846 - return error on regulator_get() failure
  Input: twl4030-vibra - correct the power down sequence
  Input: enable onkey driver of max8925
  Input: use ABS_CNT rather than (ABS_MAX + 1)

11 years agoInput: s3c2410_ts - restore accidentially dropped s3c24xx ids
Vasily Khoruzhick [Thu, 27 May 2010 16:03:19 +0000 (09:03 -0700)]
Input: s3c2410_ts - restore accidentially dropped s3c24xx ids

Without s3c24xx ids driver doesn't attach on s3c2410 and s3c244x

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonuma: update Documentation/vm/numa, add memoryless node info
Lee Schermerhorn [Wed, 26 May 2010 21:45:06 +0000 (14:45 -0700)]
numa: update Documentation/vm/numa, add memoryless node info

Kamezawa Hiroyuki requested documentation for the numa_mem_id() and slab
related changes.  He suggested Documentation/vm/numa for this
documentation.  Looking at this file, it seems to me to be hopelessly out
of date relative to current Linux NUMA support.  At the risk of going down
a rathole, I have made an attempt to rewrite the doc at a slightly higher
level [I think] and provide pointers to other in-tree documents and
out-of-tree man pages that cover the details.

Let the games begin.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonuma: in-kernel profiling: use cpu_to_mem() for per cpu allocations
Lee Schermerhorn [Wed, 26 May 2010 21:45:04 +0000 (14:45 -0700)]
numa: in-kernel profiling: use cpu_to_mem() for per cpu allocations

In kernel profiling requires that we be able to allocate "local" memory
for each cpu.  Use "cpu_to_mem()" instead of "cpu_to_node()" to support
memoryless nodes.

Depends on the "numa_mem_id()" patch.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonuma: slab: use numa_mem_id() for slab local memory node
Lee Schermerhorn [Wed, 26 May 2010 21:45:03 +0000 (14:45 -0700)]
numa: slab: use numa_mem_id() for slab local memory node

Example usage of generic "numa_mem_id()":

The mainline slab code, since ~ 2.6.19, does not handle memoryless nodes
well.  Specifically, the "fast path"--____cache_alloc()--will never
succeed as slab doesn't cache offnode object on the per cpu queues, and
for memoryless nodes, all memory will be "off node" relative to
numa_node_id().  This adds significant overhead to all kmem cache
allocations, incurring a significant regression relative to earlier
kernels [from before slab.c was reorganized].

This patch uses the generic topology function "numa_mem_id()" to return
the "effective local memory node" for the calling context.  This is the
first node in the local node's generic fallback zonelist-- the same node
that "local" mempolicy-based allocations would use.  This lets slab cache
these "local" allocations and avoid fallback/refill on every allocation.

N.B.: Slab will need to handle node and memory hotplug events that could
change the value returned by numa_mem_id() for any given node if recent
changes to address memory hotplug don't already address this.  E.g., flush
all per cpu slab queues before rebuilding the zonelists while the
"machine" is held in the stopped state.

Performance impact on "hackbench 400 process 200"

2.6.34-rc3-mmotm-100405-1609 no-patch this-patch
ia64 no memoryless nodes [avg of 10]:     11.713       11.637  ~0.65 diff
ia64 cpus all on memless nodes  [10]:    228.259       26.484  ~8.6x speedup

The slowdown of the patched kernel from ~12 sec to ~28 seconds when
configured with memoryless nodes is the result of all cpus allocating from
a single node's mm pagepool.  The cache lines of the single node are
distributed/interleaved over the memory of the real physical nodes, but
the zone lock, list heads, ...  of the single node with memory still each
live in a single cache line that is accessed from all processors.

x86_64 [8x6 AMD] [avg of 40]: 2.883    2.845

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonuma: ia64: support numa_mem_id() for memoryless nodes
Lee Schermerhorn [Wed, 26 May 2010 21:45:01 +0000 (14:45 -0700)]
numa: ia64: support numa_mem_id() for memoryless nodes

Enable 'HAVE_MEMORYLESS_NODES' by default when NUMA configured on ia64.
Initialize percpu 'numa_mem' variable when starting secondary cpus.
Generic initialization will handle the boot cpu.

Nothing uses 'numa_mem_id()' yet.  Subsequent patch with modify slab to
use this.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonuma: introduce numa_mem_id()- effective local memory node id
Lee Schermerhorn [Wed, 26 May 2010 21:45:00 +0000 (14:45 -0700)]
numa: introduce numa_mem_id()- effective local memory node id

Introduce numa_mem_id(), based on generic percpu variable infrastructure
to track "nearest node with memory" for archs that support memoryless
nodes.

Define API in <linux/topology.h> when CONFIG_HAVE_MEMORYLESS_NODES
defined, else stubs.  Architectures will define HAVE_MEMORYLESS_NODES
if/when they support them.

Archs can override definitions of:

numa_mem_id() - returns node number of "local memory" node
set_numa_mem() - initialize [this cpus'] per cpu variable 'numa_mem'
cpu_to_mem()  - return numa_mem for specified cpu; may be used as lvalue

Generic initialization of 'numa_mem' occurs in __build_all_zonelists().
This will initialize the boot cpu at boot time, and all cpus on change of
numa_zonelist_order, or when node or memory hot-plug requires zonelist
rebuild.  Archs that support memoryless nodes will need to initialize
'numa_mem' for secondary cpus as they're brought on-line.

[akpm@linux-foundation.org: fix build]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonuma: ia64: use generic percpu var numa_node_id() implementation
Lee Schermerhorn [Wed, 26 May 2010 21:44:59 +0000 (14:44 -0700)]
numa: ia64: use generic percpu var numa_node_id() implementation

ia64:  Use generic percpu implementation of numa_node_id()
   + intialize per cpu 'numa_node'
   + remove ia64 cpu_to_node() macro;  use generic
   + define CONFIG_USE_PERCPU_NUMA_NODE_ID when NUMA configured

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>