pandora-kernel.git
10 years agoARM: 7125/1: Add unwinding annotations for 64bit division functions
Laura Abbott [Thu, 6 Oct 2011 19:53:14 +0000 (20:53 +0100)]
ARM: 7125/1: Add unwinding annotations for 64bit division functions

The 64bit division functions never had unwinding annotations
added. This prevents a backtrace from being printed within
the function and if a division by 0 occurs. Add the annotations.

Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7120/1: remove bashism in check for multiple zreladdrs
Rabin Vincent [Tue, 4 Oct 2011 13:33:34 +0000 (14:33 +0100)]
ARM: 7120/1: remove bashism in check for multiple zreladdrs

Get rid of this complaint from dash:

    AS      arch/arm/boot/compressed/lib1funcs.o
  /bin/sh: 1: [: y: unexpected operator
    LD      arch/arm/boot/compressed/vmlinux

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7118/1: rename temp variable in read*_relaxed()
Olof Johansson [Tue, 4 Oct 2011 02:44:07 +0000 (03:44 +0100)]
ARM: 7118/1: rename temp variable in read*_relaxed()

This resolves the following sparse warning from readl() and other macros,
which ends up embedding readl_relaxed() using the same variable.

arch/arm/mach-tegra/dma.c:169:8: warning: symbol '__v' shadows an earlier one
arch/arm/mach-tegra/dma.c:169:8: originally declared here

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 6217/4: mach-realview: expose PB1176 ROM using physmap and map_rom
Linus Walleij [Tue, 6 Sep 2011 06:50:20 +0000 (07:50 +0100)]
ARM: 6217/4: mach-realview: expose PB1176 ROM using physmap and map_rom

This exposes the PB1176 ROM if you compile in the MTD physmap
mapping and also the map_rom chiptype.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stage
Lei Wen [Fri, 23 Sep 2011 08:04:09 +0000 (09:04 +0100)]
ARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stage

This copy really don't need to do at the very second before the kernel
would crash.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7062/1: cache: detect PIPT I-cache using CTR
Will Deacon [Tue, 23 Aug 2011 21:22:11 +0000 (22:22 +0100)]
ARM: 7062/1: cache: detect PIPT I-cache using CTR

The Cache Type Register L1Ip field identifies I-caches with a PIPT
policy using the encoding 11b.

This patch extends the cache policy parsing to identify PIPT I-caches
correctly and prevent them from being treated as VIPT aliasing in cases
where they are sufficiently large.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: platform fixups: remove mdesc argument to fixup function
Russell King [Mon, 20 Dec 2010 10:37:50 +0000 (10:37 +0000)]
ARM: platform fixups: remove mdesc argument to fixup function

Get rid of the mdesc pointer in the fixup function call.  No one uses
the mdesc pointer, it shouldn't be modified anyway, and we can't wrap
it, so let's remove it.

Platform files found by:

  $ regexp=$(git grep -h '\.fixup.*=' arch/arm |
sed 's!.*= *\([^,]*\),* *!\1!' | sort -u |
tr '\n' '|' | sed 's,|$,,;s,|,\\|,g')
  $ git grep $regexp arch/arm

Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7017/1: Use generic BUG() handler
Simon Glass [Tue, 16 Aug 2011 22:44:26 +0000 (23:44 +0100)]
ARM: 7017/1: Use generic BUG() handler

ARM uses its own BUG() handler which makes its output slightly different
from other archtectures.

One of the problems is that the ARM implementation doesn't report the function
with the BUG() in it, but always reports the PC being in __bug(). The generic
implementation doesn't have this problem.

Currently we get something like:

kernel BUG at fs/proc/breakme.c:35!
Unable to handle kernel NULL pointer dereference at virtual address 00000000
...
PC is at __bug+0x20/0x2c

With this patch it displays:

kernel BUG at fs/proc/breakme.c:35!
Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP
...
PC is at write_breakme+0xd0/0x1b4

This implementation uses an undefined instruction to implement BUG, and sets up
a bug table containing the relevant information. Many versions of gcc do not
support %c properly for ARM (inserting a # when they shouldn't) so we work
around this using distasteful macro magic.

v1: Initial version to replace existing ARM BUG() implementation with something
more similar to other architectures.

v2: Add Thumb support, remove backtrace whitespace output changes. Change to
use macros instead of requiring the asm %d flag to work (thanks to
Dave Martin <dave.martin@linaro.org>)

v3: Remove old BUG() implementation in favor of this one.
Remove the Backtrace: message (will submit this separately).
Use ARM_EXIT_KEEP() so that some architectures can dump exit text at link time
thanks to Stephen Boyd <sboyd@codeaurora.org> (although since we always
define GENERIC_BUG this might be academic.)
Rebase to linux-2.6.git master.

v4: Allow BUGS in modules (these were not reported correctly in v3)
(thanks to Stephen Boyd <sboyd@codeaurora.org> for suggesting that.)
Remove __bug() as this is no longer needed.

v5: Add %progbits as the section flags.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7102/1: mach-integrator: update defconfig
Linus Walleij [Tue, 27 Sep 2011 05:41:19 +0000 (06:41 +0100)]
ARM: 7102/1: mach-integrator: update defconfig

Update the Integrator defconfig with some sensible defaults:
- Compile a combined image supporting Integrator/AP and
  Integrator/CP, with the core modules CM720, CM920, CM922,
  CM926, CM1020, CM1022 and CM1026 in a single image, this
  works just fine and gives some nice compilation coverage
- NOHZ (tickless) and HRTIMERS turned on
- Compile using EABI, let's assume recent compilers are used
  now (tested using GCC 4.4.1)
- Remove forced 32MiB at command line, the bootloader usually
  knows this better, and my U-Boot patches nowadays make that
  boot loader pass the correct adjusted value
- Enable the MTD Physmap flash driver, so that the changes done
  earlier by Marc Zyngier replacing integrator-flash takes
  effect
- Enable the PL030 RTC driver that has not been default-compiled
  with any config for a while

This has been tested on the real hardware Integrator AP with
both an ARM920T and ARM926EJ-S core module.

Cc: Marc Zyngier <Marc.Zyngier@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7087/2: mach-integrator: get timer frequency from clock
Linus Walleij [Thu, 8 Sep 2011 20:23:15 +0000 (21:23 +0100)]
ARM: 7087/2: mach-integrator: get timer frequency from clock

We already have a clock definition for the 24MHz clock in
the Integrator, use that instead of some unclear defines
from the platform.h header. Also delete the senseless
comment that the file shouldn't be edited, I just edited it
and the world didn't come to an end, so it's obviously
false. If anyone still has the mentioned ".s file" and the
s2h awk script generating that header, raise your hand
(and give me your files).

Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7086/2: mach-integrator: modernize clock event registration
Linus Walleij [Thu, 8 Sep 2011 20:22:32 +0000 (21:22 +0100)]
ARM: 7086/2: mach-integrator: modernize clock event registration

Drop mult, shift and delta calculations and let the
clockevent core scale this as appropriate.

Set the minimum interval to 1 rather than 15 (0xf), there
is nothing in the data sheets I have indicating that 15
should be some minimum value.

Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7085/2: mach-integrator: clockevent supports oneshot mode
Linus Walleij [Thu, 8 Sep 2011 20:21:42 +0000 (21:21 +0100)]
ARM: 7085/2: mach-integrator: clockevent supports oneshot mode

The Integrator AP timer has no problem supporting oneshot
ticks with proper code, so let's do it so we can have
NOHZ configured in for this platform too.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7084/1: mach-integrator: retire some timer macros
Linus Walleij [Thu, 8 Sep 2011 08:11:40 +0000 (09:11 +0100)]
ARM: 7084/1: mach-integrator: retire some timer macros

These macros are not used by anything since the switch to
generic time in commit b9cedda230793cbf58eb012ddadedd490cc8e129
so let's retire them.

Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7078/1: Footbridge: Sort KConfig Options alphabetically
Peter Hüwe [Mon, 5 Sep 2011 20:03:02 +0000 (21:03 +0100)]
ARM: 7078/1: Footbridge: Sort KConfig Options alphabetically

As per request of rmk, the options should be sorted alphabetically.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7026/1: simpad: replace ARM specific LED code
Jochen Friedrich [Thu, 18 Aug 2011 20:51:39 +0000 (21:51 +0100)]
ARM: 7026/1: simpad: replace ARM specific LED code

Remove the legacy ARM LED code for simpad devices and
register a stadard LED platform device using GPIO line
instead.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7025/1: simpad: add GPIO based device definitions.
Jochen Friedrich [Thu, 18 Aug 2011 20:51:06 +0000 (21:51 +0100)]
ARM: 7025/1: simpad: add GPIO based device definitions.

Register keyboard, polled keyboard and I2C platform
devices based on GPIOs.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7024/1: simpad: Cleanup CS3 accessors.
Jochen Friedrich [Thu, 18 Aug 2011 20:50:31 +0000 (21:50 +0100)]
ARM: 7024/1: simpad: Cleanup CS3 accessors.

- prepend CS3 accessors by simpad_ to indicate they
  are specific to simpad devices.
- use spinlock to protect shadow register.
- implement 8 read-only pins.
- use readl/writel macros so barriers are used where
  necessary.
- register CS3 as GPIO controller with 24 pins
  (16 output only and 8 input only).
- fix PCMCIA driver to access the read-only pins
  rather than the shadow register for status bits.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7027/1: simpad: Add ucb1x00 GPIO definitions and register GPIO
Jochen Friedrich [Thu, 18 Aug 2011 20:53:57 +0000 (21:53 +0100)]
ARM: 7027/1: simpad: Add ucb1x00 GPIO definitions and register GPIO

Add ucb1x00 GPIO definitions to simpad.h and add gpio_base
to ucb1x00 platform device so the pins are available using
the GPIO API.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7068/1: process: change from __backtrace to dump_stack in show_regs
Laura Abbott [Wed, 31 Aug 2011 01:04:06 +0000 (02:04 +0100)]
ARM: 7068/1: process: change from __backtrace to dump_stack in show_regs

Currently, show_regs calls __backtrace which does
nothing if CONFIG_FRAME_POINTER is not set. Switch to
dump_stack which handles both CONFIG_FRAME_POINTER and
CONFIG_ARM_UNWIND correctly.

__backtrace is now superseded by dump_stack in general
and show_regs was the last caller so remove __backtrace
as well.

Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7064/1: vexpress: Use wfi macro in platform_do_lowpower.
Nick Bowler [Wed, 24 Aug 2011 17:55:37 +0000 (18:55 +0100)]
ARM: 7064/1: vexpress: Use wfi macro in platform_do_lowpower.

Current Versatile Express CPU hotplug code includes a hardcoded WFI
instruction, in ARM encoding.  When the kernel is compiled in Thumb-2
mode, this is invalid and causes the machine to hang hard when a CPU
is offlined.

Using the wfi macro (which uses the appropriate assembler mnemonic)
causes the correct instruction to be emitted in either case.  As a
consequence of this change, an apparently vestigial "cc" clobber is
dropped from the asm (the macro uses "memory" only).

Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7031/1: entry: Fix Thumb-2 undef handling for multi-CPU kernels
Dave Martin [Fri, 19 Aug 2011 17:00:08 +0000 (18:00 +0100)]
ARM: 7031/1: entry: Fix Thumb-2 undef handling for multi-CPU kernels

When v6 and >=v7 boards are supported in the same kernel, the
__und_usr code currently makes a build-time assumption that Thumb-2
instructions occurring in userspace don't need to be supported.
Strictly speaking this is incorrect.

This patch fixes the above case by doing a run-time check on the
CPU architecture in these cases.  This only affects kernels which
support v6 and >=v7 CPUs together: plain v6 and plain v7 kernels
are unaffected.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Reviewed-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7030/1: entry: Remove unnecessary masking when decoding Thumb-2 instructions
Dave Martin [Fri, 19 Aug 2011 16:59:27 +0000 (17:59 +0100)]
ARM: 7030/1: entry: Remove unnecessary masking when decoding Thumb-2 instructions

When testing whether a Thumb-2 instruction is 32 bits long or not,
the masking done in order to test bits 11-15 of the first
instruction halfword won't affect the result of the comparison, so
remove it.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Reviewed-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7029/1: Make cpu_architecture into a global variable
Dave Martin [Fri, 19 Aug 2011 16:58:35 +0000 (17:58 +0100)]
ARM: 7029/1: Make cpu_architecture into a global variable

The CPU architecture really should not be changing at runtime, so
make it a global variable instead of a function.

The cpu_architecture() function declared in <asm/system.h> remains
the correct way to read this variable from C code.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Reviewed-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7022/1: allow to detect conflicting zreladdrs
Sascha Hauer [Wed, 17 Aug 2011 13:24:52 +0000 (14:24 +0100)]
ARM: 7022/1: allow to detect conflicting zreladdrs

Boards used to specify zreladdr in their Makefile.boot with
zreladdr-y := x, so conflicting zreladdrs were silently overwritten.
This patch changes this to zreladdr-y += x, so that we end
up with multiple words in zreladdr in such a case. We can
detect this later and complain if necessary.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7021/1: Check for multiple load addresses before building a uImage
Sascha Hauer [Wed, 17 Aug 2011 13:23:46 +0000 (14:23 +0100)]
ARM: 7021/1: Check for multiple load addresses before building a uImage

uImages need a load address specified. This makes them
incompatible with multiple zreladdrs. Catch this error
before building an uImage so that we do not end up with
broken uImages. The load address can still be specified
with LOADADDR= on the command line.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7020/1: Check for multiple zreladdrs
Sascha Hauer [Wed, 17 Aug 2011 13:22:11 +0000 (14:22 +0100)]
ARM: 7020/1: Check for multiple zreladdrs

Without CONFIG_AUTO_ZRELADDR being set the kernel needs a single
zreladdr for building zImages. Bail out if we detect multiple
zreladdrs without CONFIG_AUTO_ZRELADDR.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7006/1: Migrate to asm-generic wrapper support
Stephen Boyd [Tue, 26 Jul 2011 17:45:54 +0000 (18:45 +0100)]
ARM: 7006/1: Migrate to asm-generic wrapper support

With d8ecc5c (kbuild: asm-generic support, 2011-04-27) we can
remove a handful of asm-generic wrappers in ARM code. Since the
generic version of sizes.h doesn't contain SZ_48M, we replace
the 4 users of SZ_48M with the equivalent SZ_32M + SZ_16M.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Acked-by: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoMerge branch 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur...
Linus Torvalds [Sun, 11 Sep 2011 00:28:46 +0000 (17:28 -0700)]
Merge branch 'fixes' of ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm

* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  ARM: 7088/1: entry: fix wrong parameter name used in do_thumb_abort
  ARM: 7080/1: l2x0: make sure I&D are not locked down on init
  ARM: 7081/1: mach-integrator: fix the clocksource
  NET: am79c961: fix race in link status code
  ARM: 7067/1: mm: keep significant bits in pfn_valid

10 years agoARM: 7088/1: entry: fix wrong parameter name used in do_thumb_abort
Janusz Krzysztofik [Thu, 8 Sep 2011 17:45:40 +0000 (18:45 +0100)]
ARM: 7088/1: entry: fix wrong parameter name used in do_thumb_abort

Commit be020f8618ca, "ARM: entry: abort-macro: specify registers to be
used for macros", while replacing register numbers with macro parameter
names, mismatched the name used for r1. For me, this resulted in user
space built for EABI with -march=armv4t -mtune=arm920t -mthumb-interwork
-mthumb broken on my OMAP1510 based Amstrad Delta (old ABI and no thumb
still worked for me though).

Fix this by using correct parameter name fsr instead of mismatched psr,
used by callers for another purpose.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agobacklight: Declare backlight_types[] const
Bart Van Assche [Sat, 10 Sep 2011 18:13:01 +0000 (20:13 +0200)]
backlight: Declare backlight_types[] const

Since backlight_types[] isn't modified, let's declare it const.  That
was probably the intention of the author of commit bb7ca747f8d6
("backlight: add backlight type"), via which the "const char const *"
construct was introduced.  The duplicate const was detected by sparse.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Sat, 10 Sep 2011 17:19:15 +0000 (10:19 -0700)]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md: Fix handling for devices from 2TB to 4TB in 0.90 metadata.
  md/raid1,10: Remove use-after-free bug in make_request.
  md/raid10: unify handling of write completion.
  Avoid dereferencing a 'request_queue' after last close.

10 years agomd: Fix handling for devices from 2TB to 4TB in 0.90 metadata.
NeilBrown [Sat, 10 Sep 2011 07:21:28 +0000 (17:21 +1000)]
md: Fix handling for devices from 2TB to 4TB in 0.90 metadata.

0.90 metadata uses an unsigned 32bit number to count the number of
kilobytes used from each device.
This should allow up to 4TB per device.
However we multiply this by 2 (to get sectors) before casting to a
larger type, so sizes above 2TB get truncated.

Also we allow rdev->sectors to be larger than 4TB, so it is possible
for the array to be resized larger than the metadata can handle.
So make sure rdev->sectors never exceeds 4TB when 0.90 metadata is in
used.

Also the sanity check at the end of super_90_load should include level
1 as it used ->size too. (RAID0 and Linear don't use ->size at all).

Reported-by: Pim Zandbergen <P.Zandbergen@macroscoop.nl>
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
10 years agomd/raid1,10: Remove use-after-free bug in make_request.
NeilBrown [Sat, 10 Sep 2011 07:21:23 +0000 (17:21 +1000)]
md/raid1,10: Remove use-after-free bug in make_request.

A single request to RAID1 or RAID10 might result in multiple
requests if there are known bad blocks that need to be avoided.

To detect if we need to submit another write request we test:
  if (sectors_handled < (bio->bi_size >> 9)) {

However this is after we call **_write_done() so the 'bio' no longer
belongs to us - the writes could have completed and the bio freed.

So move the **_write_done call until after the test against
bio->bi_size.

This addresses https://bugzilla.kernel.org/show_bug.cgi?id=41862

Reported-by: Bruno Wolff III <bruno@wolff.to>
Tested-by: Bruno Wolff III <bruno@wolff.to>
Signed-off-by: NeilBrown <neilb@suse.de>
10 years agomd/raid10: unify handling of write completion.
NeilBrown [Sat, 10 Sep 2011 07:21:17 +0000 (17:21 +1000)]
md/raid10: unify handling of write completion.

A write can complete at two different places:
1/ when the last member-device write completes, through
   raid10_end_write_request
2/ in make_request() when we remove the initial bias from ->remaining.

These two should do exactly the same thing and the comment says they
do, but they don't.

So factor the correct code out into a function and call it in both
places.  This makes the code much more similar to RAID1.

The difference is only significant if there is an error, and they
usually take a while, so it is unlikely that there will be an error
already when make_request is completing, so this is unlikely to cause
real problems.

Signed-off-by: NeilBrown <neilb@suse.de>
10 years agoAvoid dereferencing a 'request_queue' after last close.
NeilBrown [Sat, 10 Sep 2011 07:20:21 +0000 (17:20 +1000)]
Avoid dereferencing a 'request_queue' after last close.

On the last close of an 'md' device which as been stopped, the device
is destroyed and in particular the request_queue is freed.  The free
is done in a separate thread so it might happen a short time later.

__blkdev_put calls bdev_inode_switch_bdi *after* ->release has been
called.

Since commit f758eeabeb96f878c860e8f110f94ec8820822a9
bdev_inode_switch_bdi will dereference the 'old' bdi, which lives
inside a request_queue, to get a spin lock.  This causes the last
close on an md device to sometime take a spin_lock which lives in
freed memory - which results in an oops.

So move the called to bdev_inode_switch_bdi before the call to
->release.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
10 years agoPCI: Remove MRRS modification from MPS setting code
Jon Mason [Thu, 8 Sep 2011 21:41:18 +0000 (16:41 -0500)]
PCI: Remove MRRS modification from MPS setting code

Modifying the Maximum Read Request Size to 0 (value of 128Bytes) has
massive negative ramifications on some devices.  Without knowing which
devices have this issue, do not modify from the default value when
walking the PCI-E bus in pcie_bus_safe mode.  Also, make pcie_bus_safe
the default procedure.

Tested-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Simon Kirby <sim@hostway.ca>
Tested-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Reported-and-tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-and-tested-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
References: https://bugzilla.kernel.org/show_bug.cgi?id=42162
Signed-off-by: Jon Mason <mason@myri.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoFix pointer dereference before call to pcie_bus_configure_settings
Shyam Iyer [Thu, 8 Sep 2011 21:41:17 +0000 (16:41 -0500)]
Fix pointer dereference before call to pcie_bus_configure_settings

Commit b03e7495a862 ("PCI: Set PCI-E Max Payload Size on fabric")
introduced a potential NULL pointer dereference in calls to
pcie_bus_configure_settings due to attempts to access pci_bus self
variables when the self pointer is NULL.

To correct this, verify that the self pointer in pci_bus is non-NULL
before dereferencing it.

Reported-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Shyam Iyer <shyam_iyer@dell.com>
Signed-off-by: Jon Mason <mason@myri.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoMerge branch 'for-linus' of git://dev.laptop.org/users/cjb/mmc
Linus Torvalds [Fri, 9 Sep 2011 22:50:25 +0000 (15:50 -0700)]
Merge branch 'for-linus' of git://dev.laptop.org/users/cjb/mmc

* 'for-linus' of git://dev.laptop.org/users/cjb/mmc:
  mmc: sdhci-s3c: Fix mmc card I/O problem
  mmc: sd: UHS-I bus speed should be set last in UHS initialization
  mmc: sdhi: initialise mmc_data->flags before use
  mmc: core: use non-reentrant workqueue for clock gating
  mmc: core: prevent aggressive clock gating racing with ios updates
  mmc: rename mmc_host_clk_{ungate|gate} to mmc_host_clk_{hold|release}
  mmc: sdhci-esdhc-imx: add missing inclusion of linux/module.h

10 years agoMerge branch 'for-linus' of git://ceph.newdream.net/git/ceph-client
Linus Torvalds [Fri, 9 Sep 2011 22:48:34 +0000 (15:48 -0700)]
Merge branch 'for-linus' of git://ceph.newdream.net/git/ceph-client

* 'for-linus' of git://ceph.newdream.net/git/ceph-client:
  libceph: fix leak of osd structs during shutdown
  ceph: fix memory leak
  ceph: fix encoding of ino only (not relative) paths
  libceph: fix msgpool

10 years agovfs: automount should ignore LOOKUP_FOLLOW
Miklos Szeredi [Mon, 5 Sep 2011 16:06:26 +0000 (18:06 +0200)]
vfs: automount should ignore LOOKUP_FOLLOW

Prior to 2.6.38 automount would not trigger on either stat(2) or
lstat(2) on the automount point.

After 2.6.38, with the introduction of the ->d_automount()
infrastructure, stat(2) and others would start triggering automount
while lstat(2), etc. still would not.  This is a regression and a
userspace ABI change.

Problem originally reported here:

  http://thread.gmane.org/gmane.linux.kernel.autofs/6098

It appears that there was an attempt at fixing various userspace tools
to not trigger the automount.  But since the stat system call is
rather common it is impossible to "fix" all userspace.

This patch reverts the original behavior, which is to not trigger on
stat(2) and other symlink following syscalls.

[ It's not really clear what the right behavior is.  Apparently Solaris
  does the "automount on stat, leave alone on lstat".  And some programs
  can get unhappy when "stat+open+fstat" ends up giving a different
  result from the fstat than from the initial stat.

  But the change in 2.6.38 resulted in problems for some people, so
  we're going back to old behavior.  Maybe we can re-visit this
  discussion at some future date  - Linus ]

Reported-by: Leonardo Chiquitto <leonardo.lists@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Ian Kent <raven@themaw.net>
Cc: David Howells <dhowells@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoMerge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Linus Torvalds [Thu, 8 Sep 2011 23:49:32 +0000 (16:49 -0700)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine/ste_dma40: fix memory leak due to prepared descriptors
  dmaengine/ste_dma40: fix Oops due to double free of client descriptor
  dmaengine/ste_dma40: remove duplicate call to d40_pool_lli_free().
  dmaengine/ste_dma40: add missing kernel doc for pending_queue

10 years agoMerge branch 'for-linus' of git://opensource.wolfsonmicro.com/regmap
Linus Torvalds [Thu, 8 Sep 2011 23:47:52 +0000 (16:47 -0700)]
Merge branch 'for-linus' of git://opensource.wolfsonmicro.com/regmap

* 'for-linus' of git://opensource.wolfsonmicro.com/regmap:
  regmap: Remove bitrotted module_put()s

10 years agoMerge branch 'for-linus' of git://twin.jikos.cz/jikos/hid
Linus Torvalds [Thu, 8 Sep 2011 23:45:37 +0000 (16:45 -0700)]
Merge branch 'for-linus' of git://twin.jikos.cz/jikos/hid

* 'for-linus' of git://twin.jikos.cz/jikos/hid:
  HID: wacom: Unregister sysfs attributes on remove
  HID: wacom: Fix error path of power-supply initialization
  HID: add support for HuiJia USB Gamepad connector
  HID: magicmouse: ignore 'ivalid report id' while switching modes, v2
  HID: magicmouse: Set resolution of touch surfaces

10 years agoMerge branch 'for-31-rc5/i2c-fixes' of git://git.fluff.org/bjdooks/linux
Linus Torvalds [Thu, 8 Sep 2011 23:42:34 +0000 (16:42 -0700)]
Merge branch 'for-31-rc5/i2c-fixes' of git://git.fluff.org/bjdooks/linux

* 'for-31-rc5/i2c-fixes' of git://git.fluff.org/bjdooks/linux:
  i2c-tegra: fix possible race condition after tx
  i2c-tegra: add I2C_FUNC_SMBUS_EMUL
  i2c-tegra: Add of_match_table
  i2c-pxa2xx: return proper error code in ce4100_i2c_probe error paths

10 years agoMerge branch 'amd/fixes' of git://git.8bytes.org/scm/iommu
Linus Torvalds [Thu, 8 Sep 2011 23:39:47 +0000 (16:39 -0700)]
Merge branch 'amd/fixes' of git://git.8bytes.org/scm/iommu

* 'amd/fixes' of git://git.8bytes.org/scm/iommu:
  iommu/amd: Don't take domain->lock recursivly
  iommu/amd: Make sure iommu->need_sync contains correct value

10 years agoregulator: fix kernel-doc warning in consumer.h
Randy Dunlap [Thu, 8 Sep 2011 17:16:47 +0000 (10:16 -0700)]
regulator: fix kernel-doc warning in consumer.h

Fix kernel-doc warning about internal/private data by marking it
as "private:" so that kernel-doc will ignore it.

  Warning(include/linux/regulator/consumer.h:128): No description found for parameter 'ret'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agowireless: fix kernel-doc warning in net/cfg80211.h
Randy Dunlap [Thu, 8 Sep 2011 17:16:50 +0000 (10:16 -0700)]
wireless: fix kernel-doc warning in net/cfg80211.h

Fix kernel-doc warning in net/cfg80211.h:

  Warning(include/net/cfg80211.h:1884): No description found for parameter 'registered'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoMerge branch 'timers-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip
Linus Torvalds [Wed, 7 Sep 2011 20:03:48 +0000 (13:03 -0700)]
Merge branch 'timers-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip

* 'timers-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
  rtc: twl: Fix registration vs. init order
  rtc: Initialized rtc_time->tm_isdst
  rtc: Fix RTC PIE frequency limit
  rtc: rtc-twl: Remove lockdep related local_irq_enable()
  rtc: rtc-twl: Switch to using threaded irq
  rtc: ep93xx: Fix 'rtc' may be used uninitialized warning
  alarmtimers: Avoid possible denial of service with high freq periodic timers
  alarmtimers: Memset itimerspec passed into alarm_timer_get
  alarmtimers: Avoid possible null pointer traversal

10 years agoMerge branch 'sched-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip
Linus Torvalds [Wed, 7 Sep 2011 20:01:34 +0000 (13:01 -0700)]
Merge branch 'sched-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip

* 'sched-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
  sched: Fix a memory leak in __sdt_free()
  sched: Move blk_schedule_flush_plug() out of __schedule()
  sched: Separate the scheduler entry for preemption

10 years agoMerge branch 'perf-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip
Linus Torvalds [Wed, 7 Sep 2011 20:00:11 +0000 (13:00 -0700)]
Merge branch 'perf-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip

* 'perf-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
  x86, perf: Check that current->mm is alive before getting user callchain
  perf_event: Fix broken calc_timer_values()
  perf events: Fix slow and broken cgroup context switch code

10 years agoMerge branch 'linux-next' of git://git.infradead.org/ubifs-2.6 and git://git.infradea...
Linus Torvalds [Wed, 7 Sep 2011 16:51:43 +0000 (09:51 -0700)]
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6 and git://git.infradead.org/ubi-2.6

* branch 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: not build debug messages with CONFIG_UBIFS_FS_DEBUG disabled

* branch 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: do not link debug messages when debugging is disabled

10 years agoMerge branch 'hwmon-for-linus' of git://github.com/groeck/linux
Linus Torvalds [Wed, 7 Sep 2011 15:11:43 +0000 (08:11 -0700)]
Merge branch 'hwmon-for-linus' of git://github.com/groeck/linux

* 'hwmon-for-linus' of git://github.com/groeck/linux:
  hwmon: (ucd9000/ucd9200) Optimize array walk
  hwmon: (max16065) Add chip access warning to documentation
  hwmon: (max16065) Fix current calculation

10 years agoMerge branch 'for-linus' of git://github.com/ericvh/linux
Linus Torvalds [Wed, 7 Sep 2011 14:48:00 +0000 (07:48 -0700)]
Merge branch 'for-linus' of git://github.com/ericvh/linux

* 'for-linus' of git://github.com/ericvh/linux:
  fs/9p: Use protocol-defined value for lock/getlock 'type' field.
  fs/9p: Always ask new inode in lookup for cache mode disabled
  fs/9p: Add OS dependent open flags in 9p protocol
  net/9p: Fix kernel crash with msize 512K
  fs/9p: Don't update file type when updating file attributes
  fs/9p: Add fid before dentry instantiation

10 years agoMerge branch 'stable/bug.fixes' of git://oss.oracle.com/git/kwilk/xen
Linus Torvalds [Wed, 7 Sep 2011 14:46:48 +0000 (07:46 -0700)]
Merge branch 'stable/bug.fixes' of git://oss.oracle.com/git/kwilk/xen

* 'stable/bug.fixes' of git://oss.oracle.com/git/kwilk/xen:
  xen/smp: Warn user why they keel over - nosmp or noapic and what to use instead.
  xen: x86_32: do not enable iterrupts when returning from exception in interrupt context
  xen: use maximum reservation to limit amount of usable RAM

10 years agoMerge branch 'kvm-updates/3.1' of git://github.com/avikivity/kvm
Linus Torvalds [Wed, 7 Sep 2011 14:45:43 +0000 (07:45 -0700)]
Merge branch 'kvm-updates/3.1' of git://github.com/avikivity/kvm

* 'kvm-updates/3.1' of git://github.com/avikivity/kvm:
  KVM: Fix instruction size issue in pvclock scaling

10 years agoMerge branches 'upstream-fixes' and 'magicmouse' into for-linus
Jiri Kosina [Wed, 7 Sep 2011 11:53:17 +0000 (13:53 +0200)]
Merge branches 'upstream-fixes' and 'magicmouse' into for-linus

10 years agoHID: wacom: Unregister sysfs attributes on remove
David Herrmann [Mon, 5 Sep 2011 16:45:29 +0000 (18:45 +0200)]
HID: wacom: Unregister sysfs attributes on remove

HID devices can be hotplugged so we should unregister all sysfs attributes when
removing a driver. Otherwise, manually unloading the wacom-driver will not
remove the sysfs attributes. Only when the device is disconnected, they are
removed, eventually.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
10 years agoHID: wacom: Fix error path of power-supply initialization
David Herrmann [Mon, 5 Sep 2011 16:45:28 +0000 (18:45 +0200)]
HID: wacom: Fix error path of power-supply initialization

power_supply_unregister() must not be called if power_supply_register() failed.
The wdata->psy.dev pointer may point to invalid memory after a failed
power_supply_register() and hence wacom_remove() will fail while calling
power_supply_unregister().

This changes the wacom_probe function to fail if it cannot register the
power_supply devices. If we would want to keep the previous behaviour we had to
keep some flag about the power_supply state and check it on wacom_remove, but
this seems inappropriate here. Hence, we simply fail, too, if
power_supply_register fails.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
10 years agoARM: 7080/1: l2x0: make sure I&D are not locked down on init
Linus Walleij [Tue, 6 Sep 2011 06:45:46 +0000 (07:45 +0100)]
ARM: 7080/1: l2x0: make sure I&D are not locked down on init

Fighting unfixed U-Boots and other beasts that may the cache in
a locked-down state when starting the kernel, we make sure to
disable all cache lock-down when initializing the l2x0 so we
are in a known state.

Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Rabin Vincent <rabin.vincent@stericsson.com>
Cc: Adrian Bunk <adrian.bunk@movial.com>
Cc: Rob Herring <robherring2@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reported-by: Jan Rinze <janrinze@gmail.com>
Tested-by: Robert Marklund <robert.marklund@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoARM: 7081/1: mach-integrator: fix the clocksource
Linus Walleij [Tue, 6 Sep 2011 07:08:13 +0000 (08:08 +0100)]
ARM: 7081/1: mach-integrator: fix the clocksource

I was intrigued by the fact that the clock stood still on
the Integrator, but it wasn't strange at all, because the
timer was set up all wrong and probably has been for a
while. With this patch the clock starts ticking again:
make the timer periodic (reload), |= on the divisor bit
and load the timer before starting it.

Cc: stable@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoi2c-tegra: fix possible race condition after tx
Doug Anderson [Tue, 30 Aug 2011 17:46:10 +0000 (11:46 -0600)]
i2c-tegra: fix possible race condition after tx

In tegra_i2c_fill_tx_fifo, once we have finished pushing all the bytes
to the I2C hardware controller, the interrupt might happen before we
have updated i2c_dev->msg_buf_remaining at the end of the function.
Then, in tegra_i2c_isr, we will call again tegra_i2c_fill_tx_fifo
triggering weird behaviour. This has been shown to happen under real
conditions.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
10 years agoi2c-tegra: add I2C_FUNC_SMBUS_EMUL
Mike Rapoport [Tue, 30 Aug 2011 17:46:09 +0000 (11:46 -0600)]
i2c-tegra: add I2C_FUNC_SMBUS_EMUL

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
10 years agoi2c-tegra: Add of_match_table
John Bonesio [Tue, 30 Aug 2011 17:46:08 +0000 (11:46 -0600)]
i2c-tegra: Add of_match_table

This patch was intended to be part of 7ca2d1a105a239e300b937e9c41a10a4bd08f569
"i2c: Tegra: Add DeviceTree support". However, an early version of that patch,
which was missing a chunk, was applied to next-i2c. This change is that
missing chunk.

Signed-off-by: John Bonesio <bones@secretlab.ca>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
10 years agoi2c-pxa2xx: return proper error code in ce4100_i2c_probe error paths
Axel Lin [Tue, 30 Aug 2011 06:37:37 +0000 (14:37 +0800)]
i2c-pxa2xx: return proper error code in ce4100_i2c_probe error paths

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
10 years agohwmon: (ucd9000/ucd9200) Optimize array walk
Jean Delvare [Wed, 31 Aug 2011 15:53:41 +0000 (11:53 -0400)]
hwmon: (ucd9000/ucd9200) Optimize array walk

Rewrite the loop walking the id array during probe. The new code is
better adapted to a null-terminated array, and is also clearer and
more efficient than the original.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Axel Lin <axel.lin@gmail.com>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
10 years agohwmon: (max16065) Add chip access warning to documentation
Guenter Roeck [Tue, 30 Aug 2011 05:53:20 +0000 (22:53 -0700)]
hwmon: (max16065) Add chip access warning to documentation

The chips supported by the max16065 driver should not be accessed using direct
i2ctools commands. Add warning to driver documentation to alert users.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
10 years agohwmon: (max16065) Fix current calculation
Guenter Roeck [Sun, 28 Aug 2011 20:01:49 +0000 (13:01 -0700)]
hwmon: (max16065) Fix current calculation

Current calculation is completely wrong. Add missing brackets to fix it.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org # 3.0+
10 years agofs/9p: Use protocol-defined value for lock/getlock 'type' field.
Jim Garlick [Sat, 20 Aug 2011 18:51:18 +0000 (00:21 +0530)]
fs/9p: Use protocol-defined value for lock/getlock 'type' field.

Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
10 years agofs/9p: Always ask new inode in lookup for cache mode disabled
Aneesh Kumar K.V [Tue, 16 Aug 2011 16:49:28 +0000 (22:19 +0530)]
fs/9p: Always ask new inode in lookup for cache mode disabled

This make sure we don't end up reusing the unlinked inode object.
The ideal way is to use inode i_generation. But i_generation is
not available in userspace always.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
10 years agofs/9p: Add OS dependent open flags in 9p protocol
Aneesh Kumar K.V [Wed, 3 Aug 2011 14:25:32 +0000 (19:55 +0530)]
fs/9p: Add OS dependent open flags in 9p protocol

Some of the flags are OS/arch dependent we add a 9p
protocol value which maps to asm-generic/fcntl.h values in Linux
Based on the original patch from Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
10 years agonet/9p: Fix kernel crash with msize 512K
Aneesh Kumar K.V [Wed, 17 Aug 2011 16:56:04 +0000 (16:56 +0000)]
net/9p: Fix kernel crash with msize 512K

With msize equal to 512K (PAGE_SIZE * VIRTQUEUE_NUM), we hit multiple
crashes. This patch fix those.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
10 years agofs/9p: Don't update file type when updating file attributes
Aneesh Kumar K.V [Mon, 25 Jul 2011 18:06:33 +0000 (18:06 +0000)]
fs/9p: Don't update file type when updating file attributes

We should only update attributes that we can change on stat2inode.
Also do file type initialization in v9fs_init_inode.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
10 years agofs/9p: Add fid before dentry instantiation
Aneesh Kumar K.V [Mon, 25 Jul 2011 18:06:32 +0000 (18:06 +0000)]
fs/9p: Add fid before dentry instantiation

d_instantiate marks the dentry positive. So a parallel lookup and mkdir of
the directory can find dentry that doesn't have fid attached. This can result
in both the code path doing v9fs_fid_add which results in v9fs_dentry leak.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
10 years agoregmap: Remove bitrotted module_put()s
Mark Brown [Mon, 5 Sep 2011 15:07:47 +0000 (08:07 -0700)]
regmap: Remove bitrotted module_put()s

The conversion to per bus type registration functions means we don't need
to do module_get()s to hold the bus types in memory (their users will link
to them) so we removed all those calls. This left module_put() calls in
the cleanup paths which aren't needed and which cause unbalanced puts if
we ever try to unload anything.

Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
10 years agodmaengine/ste_dma40: fix memory leak due to prepared descriptors
Per Forlin [Mon, 29 Aug 2011 11:33:35 +0000 (13:33 +0200)]
dmaengine/ste_dma40: fix memory leak due to prepared descriptors

Prepared descriptors that are not submitted will not be freed. Add
prepared descriptor to a list to be able to release them upon
dmaengine_terminate_all().

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
10 years agodmaengine/ste_dma40: fix Oops due to double free of client descriptor
Per Forlin [Mon, 29 Aug 2011 11:33:34 +0000 (13:33 +0200)]
dmaengine/ste_dma40: fix Oops due to double free of client descriptor

The client list may exist in two lists at the same time. This makes free
fail since the same desc is freed multiple times. Remove desc from
client list when adding it to the pending queue. Move free of client owned
descriptors from free_dma() to terminate_all().

Unable to handle kernel paging request at virtual address 00100104
pgd = dea8c000
[00100104] *pgd=1ea62831, *pte=00000000, *ppte=00000000
Internal error: Oops: 817 [#1] PREEMPT SMP
Modules linked in:
CPU: 0    Not tainted  (3.1.0-rc3+ #58)
PC is at d40_free_chan_resources+0x64/0x330

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
10 years agodmaengine/ste_dma40: remove duplicate call to d40_pool_lli_free().
Per Forlin [Mon, 29 Aug 2011 11:33:33 +0000 (13:33 +0200)]
dmaengine/ste_dma40: remove duplicate call to d40_pool_lli_free().

d40_desc_free() already calls d40_pool_lli_free().

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
10 years agodmaengine/ste_dma40: add missing kernel doc for pending_queue
Per Forlin [Mon, 29 Aug 2011 11:33:32 +0000 (13:33 +0200)]
dmaengine/ste_dma40: add missing kernel doc for pending_queue

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
10 years agoNET: am79c961: fix race in link status code
Russell King [Mon, 5 Sep 2011 07:58:29 +0000 (08:58 +0100)]
NET: am79c961: fix race in link status code

The link status code operates from a timer, and writes the index
register without first taking a lock.  A well-placed interrupt
between writing the index register and reading the data register
could change the index register on us, which will return wrong data.
Add the necessary lock.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoLinux 3.1-rc5 v3.1-rc5
Linus Torvalds [Sun, 4 Sep 2011 22:45:10 +0000 (15:45 -0700)]
Linux 3.1-rc5

10 years agoARM: 7067/1: mm: keep significant bits in pfn_valid
Mark Rutland [Tue, 30 Aug 2011 16:45:10 +0000 (17:45 +0100)]
ARM: 7067/1: mm: keep significant bits in pfn_valid

When ARCH_HAS_HOLES_MEMORYMODEL is selected, pfn_valid calls
memblock_is_memory to test validity of a pfn:

> memblock_is_memory(pfn << PAGE_SHIFT);

On LPAE systems this cuts off the top bits, as the shift occurs before
the value is promoted to a phys_addr_t.

This patch replaces the shift with a call to __pfn_to_phys (which casts
pfn to phys_addr_t before shifting), preventing the loss of significant
bits.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 2 Sep 2011 15:27:01 +0000 (08:27 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms: make sure pci max read request size is valid on evergreen+ (v2)
  drm/radeon/kms: set a default max_pixel_clock

10 years agoMerge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Linus Torvalds [Fri, 2 Sep 2011 15:25:23 +0000 (08:25 -0700)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: fix ->write_inode return values
  xfs: fix xfs_mark_inode_dirty during umount
  xfs: deprecate the nodelaylog mount option

10 years agoiommu/amd: Don't take domain->lock recursivly
Joerg Roedel [Fri, 2 Sep 2011 12:19:50 +0000 (14:19 +0200)]
iommu/amd: Don't take domain->lock recursivly

The domain_flush_devices() function takes the domain->lock.
But this function is only called from update_domain() which
itself is already called unter the domain->lock. This causes
a deadlock situation when the dma-address-space of a domain
grows larger than 1GB.

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
10 years agoiommu/amd: Make sure iommu->need_sync contains correct value
Joerg Roedel [Fri, 2 Sep 2011 12:10:32 +0000 (14:10 +0200)]
iommu/amd: Make sure iommu->need_sync contains correct value

The value is only set to true but never set back to false,
which causes to many completion-wait commands to be sent to
hardware. Fix it with this patch.

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
10 years agoMerge branch 'fortglx/3.1/tip/timers/rtc' of git://git.linaro.org/people/jstultz...
Thomas Gleixner [Fri, 2 Sep 2011 08:50:05 +0000 (10:50 +0200)]
Merge branch 'fortglx/3.1/tip/timers/rtc' of git://git.linaro.org/people/jstultz/linux into timers/urgent

10 years agodrm/radeon/kms: make sure pci max read request size is valid on evergreen+ (v2)
Alex Deucher [Thu, 1 Sep 2011 17:46:15 +0000 (17:46 +0000)]
drm/radeon/kms: make sure pci max read request size is valid on evergreen+ (v2)

If the bios or OS sets the pci max read request size to 0 or an
invalid value (6,7), it can result in a hang or slowdown.  Check
and set it to something sane if it's invalid.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=42162

v2: use pci reg defines from include/linux/pci_regs.h

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agoxen/smp: Warn user why they keel over - nosmp or noapic and what to use instead.
Konrad Rzeszutek Wilk [Thu, 1 Sep 2011 13:48:27 +0000 (09:48 -0400)]
xen/smp: Warn user why they keel over - nosmp or noapic and what to use instead.

We have hit a couple of customer bugs where they would like to
use those parameters to run an UP kernel - but both of those
options turn of important sources of interrupt information so
we end up not being able to boot. The correct way is to
pass in 'dom0_max_vcpus=1' on the Xen hypervisor line and
the kernel will patch itself to be a UP kernel.

Fixes bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=637308

CC: stable@kernel.org
Acked-by: Ian Campbell <Ian.Campbell@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
10 years agoxen: x86_32: do not enable iterrupts when returning from exception in interrupt context
Igor Mammedov [Thu, 1 Sep 2011 11:46:55 +0000 (13:46 +0200)]
xen: x86_32: do not enable iterrupts when returning from exception in interrupt context

If vmalloc page_fault happens inside of interrupt handler with interrupts
disabled then on exit path from exception handler when there is no pending
interrupts, the following code (arch/x86/xen/xen-asm_32.S:112):

cmpw $0x0001, XEN_vcpu_info_pending(%eax)
sete XEN_vcpu_info_mask(%eax)

will enable interrupts even if they has been previously disabled according to
eflags from the bounce frame (arch/x86/xen/xen-asm_32.S:99)

testb $X86_EFLAGS_IF>>8, 8+1+ESP_OFFSET(%esp)
setz XEN_vcpu_info_mask(%eax)

Solution is in setting XEN_vcpu_info_mask only when it should be set
according to
cmpw $0x0001, XEN_vcpu_info_pending(%eax)
but not clearing it if there isn't any pending events.

Reproducer for bug is attached to RHBZ 707552

CC: stable@kernel.org
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
10 years agoxfs: fix ->write_inode return values
Christoph Hellwig [Sat, 27 Aug 2011 05:57:55 +0000 (05:57 +0000)]
xfs: fix ->write_inode return values

Currently we always redirty an inode that was attempted to be written out
synchronously but has been cleaned by an AIL pushed internall, which is
rather bogus.  Fix that by doing the i_update_core check early on and
return 0 for it.  Also include async calls for it, as doing any work for
those is just as pointless.  While we're at it also fix the sign for the
EIO return in case of a filesystem shutdown, and fix the completely
non-sensical locking around xfs_log_inode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
(cherry picked from commit 297db93bb74cf687510313eb235a7aec14d67e97)

Signed-off-by: Alex Elder <aelder@sgi.com>
10 years agoxen: use maximum reservation to limit amount of usable RAM
David Vrabel [Fri, 19 Aug 2011 14:57:16 +0000 (15:57 +0100)]
xen: use maximum reservation to limit amount of usable RAM

Use the domain's maximum reservation to limit the amount of extra RAM
for the memory balloon. This reduces the size of the pages tables and
the amount of reserved low memory (which defaults to about 1/32 of the
total RAM).

On a system with 8 GiB of RAM with the domain limited to 1 GiB the
kernel reports:

Before:

Memory: 627792k/4472000k available

After:

Memory: 549740k/11132224k available

A increase of about 76 MiB (~1.5% of the unused 7 GiB).  The reserved
low memory is also reduced from 253 MiB to 32 MiB.  The total
additional usable RAM is 329 MiB.

For dom0, this requires at patch to Xen ('x86: use 'dom0_mem' to limit
the number of pages for dom0') (c/s 23790)

CC: stable@kernel.org
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
10 years agoxfs: fix xfs_mark_inode_dirty during umount
Christoph Hellwig [Sat, 27 Aug 2011 05:57:44 +0000 (05:57 +0000)]
xfs: fix xfs_mark_inode_dirty during umount

During umount we do not add a dirty inode to the lru and wait for it to
become clean first, but force writeback of data and metadata with
I_WILL_FREE set.  Currently there is no way for XFS to detect that the
inode has been redirtied for metadata operations, as we skip the
mark_inode_dirty call during teardown.  Fix this by setting i_update_core
nanually in that case, so that the inode gets flushed during inode reclaim.

Alternatively we could enable calling mark_inode_dirty for inodes in
I_WILL_FREE state, and let the VFS dirty tracking handle this.  I decided
against this as we will get better I/O patterns from reclaim compared to
the synchronous writeout in write_inode_now, and always marking the inode
dirty in some way from xfs_mark_inode_dirty is a better safetly net in
either case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
(cherry picked from commit da6742a5a4cc844a9982fdd936ddb537c0747856)

Signed-off-by: Alex Elder <aelder@sgi.com>
10 years agolibceph: fix leak of osd structs during shutdown
Sage Weil [Wed, 31 Aug 2011 21:45:53 +0000 (14:45 -0700)]
libceph: fix leak of osd structs during shutdown

We want to remove all OSDs, not just those on the idle LRU.

Signed-off-by: Sage Weil <sage@newdream.net>
10 years agoMerge tag 'for_linus-20110831' of git://github.com/tytso/ext4
Linus Torvalds [Wed, 31 Aug 2011 22:08:19 +0000 (15:08 -0700)]
Merge tag 'for_linus-20110831' of git://github.com/tytso/ext4

* tag 'for_linus-20110831' of git://github.com/tytso/ext4:
  ext4: remove i_mutex lock in ext4_evict_inode to fix lockdep complaining

10 years agommc: sdhci-s3c: Fix mmc card I/O problem
Girish K S [Fri, 26 Aug 2011 09:28:18 +0000 (14:58 +0530)]
mmc: sdhci-s3c: Fix mmc card I/O problem

This patch fixes the problem in sdhci-s3c host driver for Samsung Soc's.
During the card identification stage the mmc core driver enumerates for
the best bus width in combination with the highest available data rate.
It starts enumerating from the highest bus width (8) to lowest width (1).

In case of few MMC cards the 4-bit bus enumeration fails and tries
the 1-bit bus enumeration. When switched to 1-bit bus mode the host driver
has to clear the previous bus width setting and apply the new setting.

The current patch will clear the previous bus mode and apply the new
mode setting.

Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Cc: <stable@kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
10 years agommc: sd: UHS-I bus speed should be set last in UHS initialization
Subhash Jadavani [Tue, 9 Aug 2011 06:49:31 +0000 (12:19 +0530)]
mmc: sd: UHS-I bus speed should be set last in UHS initialization

mmc_sd_init_uhs_card function sets the driver type, current limit
and bus speed mode on card as well as on host controller side.

Currently bus speed mode is set by sending CMD6 to card and
immediately setting the timing mode in host controller. But
then before initiating tuning sequence, it also tries to set
current limit by sending CMD6 to card which results in data
timeout errors in controller if bus speed mode is SDR50/SDR104 mode.

So basically bus speed mode should be set only after current limit
is set in the card and immediately after setting the bus speed mode,
tuning sequence should be initiated.

Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Reviewed-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
10 years agommc: sdhi: initialise mmc_data->flags before use
Simon Horman [Fri, 19 Aug 2011 01:07:07 +0000 (10:07 +0900)]
mmc: sdhi: initialise mmc_data->flags before use

This corrects a logic error that I introduced in
"mmc: sdhi: Add write16_hook"

Reported-by: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Chris Ball <cjb@laptop.org>
10 years agommc: core: use non-reentrant workqueue for clock gating
Mika Westerberg [Thu, 18 Aug 2011 12:23:49 +0000 (15:23 +0300)]
mmc: core: use non-reentrant workqueue for clock gating

The default multithread workqueue can cause the same work to be executed
concurrently on a different CPUs. This isn't really suitable for clock
gating as it might already gated the clock and gating it twice results both
host->clk_old and host->ios.clock to be set to 0.

To prevent this from happening we use system_nrt_wq instead.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Chris Ball <cjb@laptop.org>
Cc: <stable@kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
10 years agommc: core: prevent aggressive clock gating racing with ios updates
Mika Westerberg [Thu, 18 Aug 2011 12:23:48 +0000 (15:23 +0300)]
mmc: core: prevent aggressive clock gating racing with ios updates

We have seen at least two different races when clock gating kicks in in a
middle of ios structure update.

First one happens when ios->clock is changed outside of aggressive clock
gating framework, for example via mmc_set_clock(). The race might happen
when we run following code:

mmc_set_ios():
...
if (ios->clock > 0)
mmc_set_ungated(host);

Now if gating kicks in right after the condition check we end up setting
host->clk_gated to false even though we have just gated the clock. Next
time a request is started we try to ungate and restore the clock in
mmc_host_clk_hold(). However since we have host->clk_gated set to false the
original clock is not restored.

This eventually will cause the host controller to hang since its clock is
disabled while we are trying to issue a request. For example on Intel
Medfield platform we see:

[   13.818610] mmc2: Timeout waiting for hardware interrupt.
[   13.818698] sdhci: =========== REGISTER DUMP (mmc2)===========
[   13.818753] sdhci: Sys addr: 0x00000000 | Version:  0x00008901
[   13.818804] sdhci: Blk size: 0x00000000 | Blk cnt:  0x00000000
[   13.818853] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[   13.818903] sdhci: Present:  0x1fff0000 | Host ctl: 0x00000001
[   13.818951] sdhci: Power:    0x0000000d | Blk gap:  0x00000000
[   13.819000] sdhci: Wake-up:  0x00000000 | Clock:    0x00000000
[   13.819049] sdhci: Timeout:  0x00000000 | Int stat: 0x00000000
[   13.819098] sdhci: Int enab: 0x00ff00c3 | Sig enab: 0x00ff00c3
[   13.819147] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[   13.819196] sdhci: Caps:     0x6bee32b2 | Caps_1:   0x00000000
[   13.819245] sdhci: Cmd:      0x00000000 | Max curr: 0x00000000
[   13.819292] sdhci: Host ctl2: 0x00000000
[   13.819331] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000
[   13.819377] sdhci: ===========================================
[   13.919605] mmc2: Reset 0x2 never completed.

and it never recovers.

Second race might happen while running mmc_power_off():

static void mmc_power_off(struct mmc_host *host)
{
host->ios.clock = 0;
host->ios.vdd = 0;

[ clock gating kicks in here ]

/*
 * Reset ocr mask to be the highest possible voltage supported for
 * this mmc host. This value will be used at next power up.
 */
host->ocr = 1 << (fls(host->ocr_avail) - 1);

if (!mmc_host_is_spi(host)) {
host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
host->ios.chip_select = MMC_CS_DONTCARE;
}
host->ios.power_mode = MMC_POWER_OFF;
host->ios.bus_width = MMC_BUS_WIDTH_1;
host->ios.timing = MMC_TIMING_LEGACY;
mmc_set_ios(host);
}

If the clock gating worker kicks in while we are only partially updated the
ios structure the host controller gets incomplete ios and might not work as
supposed. Again on Intel Medfield platform we get:

[    4.185349] kernel BUG at drivers/mmc/host/sdhci.c:1155!
[    4.185422] invalid opcode: 0000 [#1] PREEMPT SMP
[    4.185509] Modules linked in:
[    4.185565]
[    4.185608] Pid: 4, comm: kworker/0:0 Not tainted 3.0.0+ #240 Intel Corporation Medfield/iCDKA
[    4.185742] EIP: 0060:[<c136364e>] EFLAGS: 00010083 CPU: 0
[    4.185827] EIP is at sdhci_set_power+0x3e/0xd0
[    4.185891] EAX: f5ff98e0 EBX: f5ff98e0 ECX: 00000000 EDX: 00000001
[    4.185970] ESI: f5ff977c EDI: f5ff9904 EBP: f644fe98 ESP: f644fe94
[    4.186049]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    4.186125] Process kworker/0:0 (pid: 4, ti=f644e000 task=f644c0e0 task.ti=f644e000)
[    4.186219] Stack:
[    4.186257]  f5ff98e0 f644feb0 c1365173 00000282 f5ff9460 f5ff96e0 f5ff96e0 f644feec
[    4.186418]  c1355bd8 f644c0e0 c1499c3d f5ff96e0 f644fed4 00000006 f5ff96e0 00000286
[    4.186579]  f644fedc c107922b f644feec 00000286 f5ff9460 f5ff9700 f644ff10 c135839e
[    4.186739] Call Trace:
[    4.186802]  [<c1365173>] sdhci_set_ios+0x1c3/0x340
[    4.186883]  [<c1355bd8>] mmc_gate_clock+0x68/0x120
[    4.186963]  [<c1499c3d>] ? _raw_spin_unlock_irqrestore+0x4d/0x60
[    4.187052]  [<c107922b>] ? trace_hardirqs_on+0xb/0x10
[    4.187134]  [<c135839e>] mmc_host_clk_gate_delayed+0xbe/0x130
[    4.187219]  [<c105ec09>] ? process_one_work+0xf9/0x5b0
[    4.187300]  [<c135841d>] mmc_host_clk_gate_work+0xd/0x10
[    4.187379]  [<c105ec82>] process_one_work+0x172/0x5b0
[    4.187457]  [<c105ec09>] ? process_one_work+0xf9/0x5b0
[    4.187538]  [<c1358410>] ? mmc_host_clk_gate_delayed+0x130/0x130
[    4.187625]  [<c105f3c8>] worker_thread+0x118/0x330
[    4.187700]  [<c1496cee>] ? preempt_schedule+0x2e/0x50
[    4.187779]  [<c105f2b0>] ? rescuer_thread+0x1f0/0x1f0
[    4.187857]  [<c1062cf4>] kthread+0x74/0x80
[    4.187931]  [<c1062c80>] ? __init_kthread_worker+0x60/0x60
[    4.188015]  [<c149acfa>] kernel_thread_helper+0x6/0xd
[    4.188079] Code: 81 fa 00 00 04 00 0f 84 a7 00 00 00 7f 21 81 fa 80 00 00 00 0f 84 92 00 00 00 81 fa 00 00 0
[    4.188780] EIP: [<c136364e>] sdhci_set_power+0x3e/0xd0 SS:ESP 0068:f644fe94
[    4.188898] ---[ end trace a7b23eecc71777e4 ]---

This BUG() comes from the fact that ios.power_mode was still in previous
value (MMC_POWER_ON) and ios.vdd was set to zero.

We prevent these by inhibiting the clock gating while we update the ios
structure.

Both problems can be reproduced by simply running the device in a reboot
loop.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Chris Ball <cjb@laptop.org>
Cc: <stable@kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
10 years agommc: rename mmc_host_clk_{ungate|gate} to mmc_host_clk_{hold|release}
Mika Westerberg [Thu, 18 Aug 2011 12:23:47 +0000 (15:23 +0300)]
mmc: rename mmc_host_clk_{ungate|gate} to mmc_host_clk_{hold|release}

As per suggestion by Linus Walleij:

  > If you think the names of the functions are confusing then
  > you may rename them, say like this:
  >
  > mmc_host_clk_ungate() -> mmc_host_clk_hold()
  > mmc_host_clk_gate() -> mmc_host_clk_release()
  >
  > Which would make the usecases more clear

(This is CC'd to stable@ because the next two patches, which fix
observable races, depend on it.)

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <stable@kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>