ref Reference board
mic-ref Reference board with power management for ports
dell-s14 Dell laptop
+ dell-vostro-3500 Dell Vostro 3500 laptop
hp HP laptops with (inverted) mute-LED
hp-dv7-4000 HP dv-7 4000
auto BIOS setup (default)
SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
M: Liam Girdwood <lrg@ti.com>
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://alsa-project.org/main/index.php/ASoC
S: Supported
#define WM8958_MICB2_DISCH_SHIFT 0 /* MICB2_DISCH */
#define WM8958_MICB2_DISCH_WIDTH 1 /* MICB2_DISCH */
+/*
+ * R210 (0xD2) - Mic Detect 3
+ */
+#define WM8958_MICD_LVL_MASK 0x07FC /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_SHIFT 2 /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_WIDTH 9 /* MICD_LVL - [10:2] */
+#define WM8958_MICD_VALID 0x0002 /* MICD_VALID */
+#define WM8958_MICD_VALID_MASK 0x0002 /* MICD_VALID */
+#define WM8958_MICD_VALID_SHIFT 1 /* MICD_VALID */
+#define WM8958_MICD_VALID_WIDTH 1 /* MICD_VALID */
+#define WM8958_MICD_STS 0x0001 /* MICD_STS */
+#define WM8958_MICD_STS_MASK 0x0001 /* MICD_STS */
+#define WM8958_MICD_STS_SHIFT 0 /* MICD_STS */
+#define WM8958_MICD_STS_WIDTH 1 /* MICD_STS */
+
/*
* R76 (0x4C) - Charge Pump (1)
*/
struct link_ctl_info info;
int vals[2]; /* current values */
unsigned int flags;
+ struct snd_kcontrol *kctl; /* original kcontrol pointer */
struct snd_kcontrol slave; /* the copy of original control entry */
};
slave->count * sizeof(*slave->vd), GFP_KERNEL);
if (!srec)
return -ENOMEM;
+ srec->kctl = slave;
srec->slave = *slave;
memcpy(srec->slave.vd, slave->vd, slave->count * sizeof(*slave->vd));
srec->master = master_link;
static void master_free(struct snd_kcontrol *kcontrol)
{
struct link_master *master = snd_kcontrol_chip(kcontrol);
- struct link_slave *slave;
-
- list_for_each_entry(slave, &master->slaves, list)
- slave->master = NULL;
+ struct link_slave *slave, *n;
+
+ /* free all slave links and retore the original slave kctls */
+ list_for_each_entry_safe(slave, n, &master->slaves, list) {
+ struct snd_kcontrol *sctl = slave->kctl;
+ struct list_head olist = sctl->list;
+ memcpy(sctl, &slave->slave, sizeof(*sctl));
+ memcpy(sctl->vd, slave->slave.vd,
+ sctl->count * sizeof(*sctl->vd));
+ sctl->list = olist; /* keep the current linked-list */
+ kfree(slave);
+ }
kfree(master);
}
return 0;
}
+typedef int (*map_slave_func_t)(void *, struct snd_kcontrol *);
+
+/* apply the function to all matching slave ctls in the mixer list */
+static int map_slaves(struct hda_codec *codec, const char * const *slaves,
+ map_slave_func_t func, void *data)
+{
+ struct hda_nid_item *items;
+ const char * const *s;
+ int i, err;
+
+ items = codec->mixers.list;
+ for (i = 0; i < codec->mixers.used; i++) {
+ struct snd_kcontrol *sctl = items[i].kctl;
+ if (!sctl || !sctl->id.name ||
+ sctl->id.iface != SNDRV_CTL_ELEM_IFACE_MIXER)
+ continue;
+ for (s = slaves; *s; s++) {
+ if (!strcmp(sctl->id.name, *s)) {
+ err = func(data, sctl);
+ if (err)
+ return err;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static int check_slave_present(void *data, struct snd_kcontrol *sctl)
+{
+ return 1;
+}
+
/**
* snd_hda_add_vmaster - create a virtual master control and add slaves
* @codec: HD-audio codec
unsigned int *tlv, const char * const *slaves)
{
struct snd_kcontrol *kctl;
- const char * const *s;
int err;
- for (s = slaves; *s && !snd_hda_find_mixer_ctl(codec, *s); s++)
- ;
- if (!*s) {
+ err = map_slaves(codec, slaves, check_slave_present, NULL);
+ if (err != 1) {
snd_printdd("No slave found for %s\n", name);
return 0;
}
if (err < 0)
return err;
- for (s = slaves; *s; s++) {
- struct snd_kcontrol *sctl;
- int i = 0;
- for (;;) {
- sctl = _snd_hda_find_mixer_ctl(codec, *s, i);
- if (!sctl) {
- if (!i)
- snd_printdd("Cannot find slave %s, "
- "skipped\n", *s);
- break;
- }
- err = snd_ctl_add_slave(kctl, sctl);
- if (err < 0)
- return err;
- i++;
- }
- }
+ err = map_slaves(codec, slaves, (map_slave_func_t)snd_ctl_add_slave,
+ kctl);
+ if (err < 0)
+ return err;
return 0;
}
EXPORT_SYMBOL_HDA(snd_hda_add_vmaster);
memset(sequences_hp, 0, sizeof(sequences_hp));
assoc_line_out = 0;
+ codec->ignore_misc_bit = true;
end_nid = codec->start_nid + codec->num_nodes;
for (nid = codec->start_nid; nid < end_nid; nid++) {
unsigned int wid_caps = get_wcaps(codec, nid);
continue;
def_conf = snd_hda_codec_get_pincfg(codec, nid);
+ if (!(get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) &
+ AC_DEFCFG_MISC_NO_PRESENCE))
+ codec->ignore_misc_bit = false;
conn = get_defcfg_connect(def_conf);
if (conn == AC_JACK_PORT_NONE)
continue;
unsigned int no_sticky_stream:1; /* no sticky-PCM stream assignment */
unsigned int pins_shutup:1; /* pins are shut up */
unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */
+ unsigned int ignore_misc_bit:1; /* ignore MISC_NO_PRESENCE bit */
#ifdef CONFIG_SND_HDA_POWER_SAVE
unsigned int power_on :1; /* current (global) power-state */
unsigned int power_transition :1; /* power-state in transition */
static inline bool is_jack_detectable(struct hda_codec *codec, hda_nid_t nid)
{
- return (snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT) &&
- /* disable MISC_NO_PRESENCE check because it may break too
- * many devices
- */
- /*(get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid) &
- AC_DEFCFG_MISC_NO_PRESENCE)) &&*/
- (get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP);
+ if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT))
+ return false;
+ if (!codec->ignore_misc_bit &&
+ (get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) &
+ AC_DEFCFG_MISC_NO_PRESENCE))
+ return false;
+ if (!(get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP))
+ return false;
+ return true;
}
/* flags for hda_nid_item */
SND_PCI_QUIRK(0x1043, 0x1993, "Asus U50F", CXT5066_ASUS),
SND_PCI_QUIRK(0x1179, 0xff1e, "Toshiba Satellite C650D", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5),
- SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5),
SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board",
CXT5066_LAPTOP),
SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5),
struct alc_spec *spec = codec->spec;
const struct hda_input_mux *imux;
unsigned int mux_idx;
- int i, type;
+ int i, type, num_conns;
hda_nid_t nid;
mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx;
spec->capsrc_nids[adc_idx] : spec->adc_nids[adc_idx];
/* no selection? */
- if (snd_hda_get_conn_list(codec, nid, NULL) <= 1)
+ num_conns = snd_hda_get_conn_list(codec, nid, NULL);
+ if (num_conns <= 1)
return 1;
type = get_wcaps_type(get_wcaps(codec, nid));
if (type == AC_WID_AUD_MIX) {
/* Matrix-mixer style (e.g. ALC882) */
- for (i = 0; i < imux->num_items; i++) {
- unsigned int v = (i == idx) ? 0 : HDA_AMP_MUTE;
- snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT,
- imux->items[i].index,
+ int active = imux->items[idx].index;
+ for (i = 0; i < num_conns; i++) {
+ unsigned int v = (i == active) ? 0 : HDA_AMP_MUTE;
+ snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, i,
HDA_AMP_MUTE, v);
}
} else {
STAC_92HD83XXX_REF,
STAC_92HD83XXX_PWR_REF,
STAC_DELL_S14,
+ STAC_DELL_VOSTRO_3500,
STAC_92HD83XXX_HP,
STAC_92HD83XXX_HP_cNB11_INTQUAD,
STAC_HP_DV7_4000,
0x40f000f0, 0x40f000f0,
};
+static const unsigned int dell_vostro_3500_pin_configs[10] = {
+ 0x02a11020, 0x0221101f, 0x400000f0, 0x90170110,
+ 0x400000f1, 0x400000f2, 0x400000f3, 0x90a60160,
+ 0x400000f4, 0x400000f5,
+};
+
static const unsigned int hp_dv7_4000_pin_configs[10] = {
0x03a12050, 0x0321201f, 0x40f000f0, 0x90170110,
0x40f000f0, 0x40f000f0, 0x90170110, 0xd5a30140,
[STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs,
[STAC_92HD83XXX_PWR_REF] = ref92hd83xxx_pin_configs,
[STAC_DELL_S14] = dell_s14_pin_configs,
+ [STAC_DELL_VOSTRO_3500] = dell_vostro_3500_pin_configs,
[STAC_92HD83XXX_HP_cNB11_INTQUAD] = hp_cNB11_intquad_pin_configs,
[STAC_HP_DV7_4000] = hp_dv7_4000_pin_configs,
};
[STAC_92HD83XXX_REF] = "ref",
[STAC_92HD83XXX_PWR_REF] = "mic-ref",
[STAC_DELL_S14] = "dell-s14",
+ [STAC_DELL_VOSTRO_3500] = "dell-vostro-3500",
[STAC_92HD83XXX_HP] = "hp",
[STAC_92HD83XXX_HP_cNB11_INTQUAD] = "hp_cNB11_intquad",
[STAC_HP_DV7_4000] = "hp-dv7-4000",
"DFI LanParty", STAC_92HD83XXX_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ba,
"unknown Dell", STAC_DELL_S14),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x1028,
+ "Dell Vostro 3500", STAC_DELL_VOSTRO_3500),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xff00, 0x3600,
"HP", STAC_92HD83XXX_HP),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1656,
}
if (civ != igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV))
continue;
+
+ /* IO read operation is very expensive inside virtual machine
+ * as it is emulated. The probability that subsequent PICB read
+ * will return different result is high enough to loop till
+ * timeout here.
+ * Same CIV is strict enough condition to be sure that PICB
+ * is valid inside VM on emulated card. */
if (chip->inside_vm)
break;
if (ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
ICH_PCR, ICH_SCR, ICH_SIS_TCR
};
+static int __devinit snd_intel8x0_inside_vm(struct pci_dev *pci)
+{
+ int result = inside_vm;
+ char *msg = NULL;
+
+ /* check module parameter first (override detection) */
+ if (result >= 0) {
+ msg = result ? "enable (forced) VM" : "disable (forced) VM";
+ goto fini;
+ }
+
+ /* detect KVM and Parallels virtual environments */
+ result = kvm_para_available();
+#ifdef X86_FEATURE_HYPERVISOR
+ result = result || boot_cpu_has(X86_FEATURE_HYPERVISOR);
+#endif
+ if (!result)
+ goto fini;
+
+ /* check for known (emulated) devices */
+ if (pci->subsystem_vendor == 0x1af4 &&
+ pci->subsystem_device == 0x1100) {
+ /* KVM emulated sound, PCI SSID: 1af4:1100 */
+ msg = "enable KVM";
+ } else if (pci->subsystem_vendor == 0x1ab8) {
+ /* Parallels VM emulated sound, PCI SSID: 1ab8:xxxx */
+ msg = "enable Parallels VM";
+ } else {
+ msg = "disable (unknown or VT-d) VM";
+ result = 0;
+ }
+
+fini:
+ if (msg != NULL)
+ printk(KERN_INFO "intel8x0: %s optimization\n", msg);
+
+ return result;
+}
+
static int __devinit snd_intel8x0_create(struct snd_card *card,
struct pci_dev *pci,
unsigned long device_type,
if (xbox)
chip->xbox = 1;
- chip->inside_vm = inside_vm;
- if (inside_vm)
- printk(KERN_INFO "intel8x0: enable KVM optimization\n");
+ chip->inside_vm = snd_intel8x0_inside_vm(pci);
if (pci->vendor == PCI_VENDOR_ID_INTEL &&
pci->device == PCI_DEVICE_ID_INTEL_440MX)
buggy_irq = 0;
}
- if (inside_vm < 0) {
- /* detect KVM and Parallels virtual environments */
- inside_vm = kvm_para_available();
-#if defined(__i386__) || defined(__x86_64__)
- inside_vm = inside_vm || boot_cpu_has(X86_FEATURE_HYPERVISOR);
-#endif
- }
-
if ((err = snd_intel8x0_create(card, pci, pci_id->driver_data,
&chip)) < 0) {
snd_card_free(card);
static int wm8994_readable(struct snd_soc_codec *codec, unsigned int reg)
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
- struct wm8994 *control = wm8994->control_data;
+ struct wm8994 *control = codec->control_data;
switch (reg) {
case WM8994_GPIO_1:
{
struct wm8994_priv *wm8994 = data;
struct snd_soc_codec *codec = wm8994->codec;
- int reg;
+ int reg, count;
- reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
- if (reg < 0) {
- dev_err(codec->dev, "Failed to read mic detect status: %d\n",
- reg);
- return IRQ_NONE;
- }
+ /* We may occasionally read a detection without an impedence
+ * range being provided - if that happens loop again.
+ */
+ count = 10;
+ do {
+ reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
+ if (reg < 0) {
+ dev_err(codec->dev,
+ "Failed to read mic detect status: %d\n",
+ reg);
+ return IRQ_NONE;
+ }
- if (!(reg & WM8958_MICD_VALID)) {
- dev_dbg(codec->dev, "Mic detect data not valid\n");
- goto out;
- }
+ if (!(reg & WM8958_MICD_VALID)) {
+ dev_dbg(codec->dev, "Mic detect data not valid\n");
+ goto out;
+ }
+
+ if (!(reg & WM8958_MICD_STS) || (reg & WM8958_MICD_LVL_MASK))
+ break;
+
+ msleep(1);
+ } while (count--);
+
+ if (count == 0)
+ dev_warn(codec->dev, "No impedence range reported for jack\n");
#ifndef CONFIG_SND_SOC_WM8994_MODULE
trace_snd_soc_jack_irq(dev_name(codec->dev));
wm8994_request_irq(codec->control_data, WM8994_IRQ_FIFOS_ERR,
wm8994_fifo_error, "FIFO error", codec);
- wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_WARN,
+ wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_WARN,
wm8994_temp_warn, "Thermal warning", codec);
- wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_SHUT,
+ wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_SHUT,
wm8994_temp_shut, "Thermal shutdown", codec);
ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_DCS_DONE,
* interface to ALSA control for feature/mixer units
*/
+/* volume control quirks */
+static void volume_control_quirks(struct usb_mixer_elem_info *cval,
+ struct snd_kcontrol *kctl)
+{
+ switch (cval->mixer->chip->usb_id) {
+ case USB_ID(0x0471, 0x0101):
+ case USB_ID(0x0471, 0x0104):
+ case USB_ID(0x0471, 0x0105):
+ case USB_ID(0x0672, 0x1041):
+ /* quirk for UDA1321/N101.
+ * note that detection between firmware 2.1.1.7 (N101)
+ * and later 2.1.1.21 is not very clear from datasheets.
+ * I hope that the min value is -15360 for newer firmware --jk
+ */
+ if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
+ cval->min == -15616) {
+ snd_printk(KERN_INFO
+ "set volume quirk for UDA1321/N101 chip\n");
+ cval->max = -256;
+ }
+ break;
+
+ case USB_ID(0x046d, 0x09a4):
+ if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+ snd_printk(KERN_INFO
+ "set volume quirk for QuickCam E3500\n");
+ cval->min = 6080;
+ cval->max = 8768;
+ cval->res = 192;
+ }
+ break;
+
+ case USB_ID(0x046d, 0x0808):
+ case USB_ID(0x046d, 0x0809):
+ case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
+ case USB_ID(0x046d, 0x0991):
+ /* Most audio usb devices lie about volume resolution.
+ * Most Logitech webcams have res = 384.
+ * Proboly there is some logitech magic behind this number --fishor
+ */
+ if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+ snd_printk(KERN_INFO
+ "set resolution quirk: cval->res = 384\n");
+ cval->res = 384;
+ }
+ break;
+
+ }
+}
+
/*
* retrieve the minimum and maximum values for the specified control
*/
-static int get_min_max(struct usb_mixer_elem_info *cval, int default_min)
+static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval,
+ int default_min, struct snd_kcontrol *kctl)
{
/* for failsafe */
cval->min = default_min;
cval->initialized = 1;
}
+ if (kctl)
+ volume_control_quirks(cval, kctl);
+
/* USB descriptions contain the dB scale in 1/256 dB unit
* while ALSA TLV contains in 1/100 dB unit
*/
return 0;
}
+#define get_min_max(cval, def) get_min_max_with_quirks(cval, def, NULL)
/* get a feature/mixer unit info */
static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
uinfo->value.integer.max = 1;
} else {
if (!cval->initialized) {
- get_min_max(cval, 0);
+ get_min_max_with_quirks(cval, 0, kcontrol);
if (cval->initialized && cval->dBmin >= cval->dBmax) {
kcontrol->vd[0].access &=
~(SNDRV_CTL_ELEM_ACCESS_TLV_READ |
cval->ch_readonly = readonly_mask;
}
- /* get min/max values */
- get_min_max(cval, 0);
-
/* if all channels in the mask are marked read-only, make the control
* read-only. set_cur_mix_value() will check the mask again and won't
* issue write commands to read-only channels. */
len = snd_usb_copy_string_desc(state, nameid,
kctl->id.name, sizeof(kctl->id.name));
+ /* get min/max values */
+ get_min_max_with_quirks(cval, 0, kctl);
+
switch (control) {
case UAC_FU_MUTE:
case UAC_FU_VOLUME:
break;
}
- /* volume control quirks */
- switch (state->chip->usb_id) {
- case USB_ID(0x0471, 0x0101):
- case USB_ID(0x0471, 0x0104):
- case USB_ID(0x0471, 0x0105):
- case USB_ID(0x0672, 0x1041):
- /* quirk for UDA1321/N101.
- * note that detection between firmware 2.1.1.7 (N101)
- * and later 2.1.1.21 is not very clear from datasheets.
- * I hope that the min value is -15360 for newer firmware --jk
- */
- if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
- cval->min == -15616) {
- snd_printk(KERN_INFO
- "set volume quirk for UDA1321/N101 chip\n");
- cval->max = -256;
- }
- break;
-
- case USB_ID(0x046d, 0x09a4):
- if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
- snd_printk(KERN_INFO
- "set volume quirk for QuickCam E3500\n");
- cval->min = 6080;
- cval->max = 8768;
- cval->res = 192;
- }
- break;
-
- case USB_ID(0x046d, 0x0808):
- case USB_ID(0x046d, 0x0809):
- case USB_ID(0x046d, 0x0991):
- /* Most audio usb devices lie about volume resolution.
- * Most Logitech webcams have res = 384.
- * Proboly there is some logitech magic behind this number --fishor
- */
- if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
- snd_printk(KERN_INFO
- "set resolution quirk: cval->res = 384\n");
- cval->res = 384;
- }
- break;
-
- }
-
range = (cval->max - cval->min) / cval->res;
/* Are there devices with volume range more than 255? I use a bit more
* to be sure. 384 is a resolution magic number found on Logitech
return -ENOMEM;
}
if (fp->nr_rates > 0) {
- rate_table = kmalloc(sizeof(int) * fp->nr_rates, GFP_KERNEL);
+ rate_table = kmemdup(fp->rate_table,
+ sizeof(int) * fp->nr_rates, GFP_KERNEL);
if (!rate_table) {
kfree(fp);
return -ENOMEM;
}
- memcpy(rate_table, fp->rate_table, sizeof(int) * fp->nr_rates);
fp->rate_table = rate_table;
}
if (altsd->bNumEndpoints != 1)
return -ENXIO;
- fp = kmalloc(sizeof(*fp), GFP_KERNEL);
+ fp = kmemdup(&ua_format, sizeof(*fp), GFP_KERNEL);
if (!fp)
return -ENOMEM;
- memcpy(fp, &ua_format, sizeof(*fp));
fp->iface = altsd->bInterfaceNumber;
fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
git.openpandora.org / pandora-kernel.git / commitdiff