+++ /dev/null
-/*
- * P1023 RDS Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Author: Roy Zang <tie-fei.zang@freescale.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1023si-pre.dtsi"
-
-/ {
- model = "fsl,P1023";
- compatible = "fsl,P1023RDS";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- memory {
- device_type = "memory";
- };
-
- soc: soc@ff600000 {
- ranges = <0x0 0x0 0xff600000 0x200000>;
-
- i2c@3000 {
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- };
- };
-
- spi@7000 {
- fsl_dataflash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "atmel,at45db081d";
- reg = <0>;
- spi-max-frequency = <40000000>; /* input clock */
- partition@u-boot {
- /* 512KB for u-boot Bootloader Image */
- label = "u-boot-spi";
- reg = <0x00000000 0x00080000>;
- read-only;
- };
- partition@dtb {
- /* 512KB for DTB Image */
- label = "dtb-spi";
- reg = <0x00080000 0x00080000>;
- read-only;
- };
- };
- };
-
- usb@22000 {
- dr_mode = "host";
- phy_type = "ulpi";
- };
- };
-
- lbc: localbus@ff605000 {
- reg = <0 0xff605000 0 0x1000>;
-
- /* NOR Flash, BCSR */
- ranges = <0x0 0x0 0x0 0xee000000 0x02000000
- 0x1 0x0 0x0 0xe0000000 0x00008000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x02000000>;
- bank-width = <2>;
- device-width = <1>;
- partition@0 {
- label = "ramdisk";
- reg = <0x00000000 0x01c00000>;
- };
- partition@1c00000 {
- label = "kernel";
- reg = <0x01c00000 0x002e0000>;
- };
- partiton@1ee0000 {
- label = "dtb";
- reg = <0x01ee0000 0x00020000>;
- };
- partition@1f00000 {
- label = "firmware";
- reg = <0x01f00000 0x00080000>;
- read-only;
- };
- partition@1f80000 {
- label = "u-boot";
- reg = <0x01f80000 0x00080000>;
- read-only;
- };
- };
-
- fpga@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1023rds-fpga";
- reg = <1 0 0x8000>;
- ranges = <0 1 0 0x8000>;
-
- bcsr@20 {
- compatible = "fsl,p1023rds-bcsr";
- reg = <0x20 0x20>;
- };
- };
- };
-
- pci0: pcie@ff60a000 {
- reg = <0 0xff60a000 0 0x1000>;
- ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
- pcie@0 {
- /* IRQ[0:3] are pulled up on board, set to active-low */
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- board_pci1: pci1: pcie@ff609000 {
- reg = <0 0xff609000 0 0x1000>;
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- pcie@0 {
- /*
- * IRQ[4:6] only for PCIe, set to active-high,
- * IRQ[7] is pulled up on board, set to active-low
- */
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 2 0 0
- 0000 0 0 2 &mpic 5 2 0 0
- 0000 0 0 3 &mpic 6 2 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci2: pcie@ff60b000 {
- reg = <0 0xff60b000 0 0x1000>;
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- pcie@0 {
- /*
- * IRQ[8:10] are pulled up on board, set to active-low
- * IRQ[11] only for PCIe, set to active-high,
- */
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 2 0 0
- >;
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-};
-
-/include/ "fsl/p1023si-post.dtsi"
* Author: Roy Zang <tie-fei.zang@freescale.com>
*
* Description:
- * P1023 RDS Board Setup
+ * P1023 RDB Board Setup
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Setup the architecture
*
*/
-static void __init mpc85xx_rds_setup_arch(void)
+static void __init mpc85xx_rdb_setup_arch(void)
{
struct device_node *np;
if (ppc_md.progress)
- ppc_md.progress("p1023_rds_setup_arch()", 0);
+ ppc_md.progress("p1023_rdb_setup_arch()", 0);
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
fsl_pci_assign_primary();
}
-machine_arch_initcall(p1023_rds, mpc85xx_common_publish_devices);
machine_arch_initcall(p1023_rdb, mpc85xx_common_publish_devices);
-static void __init mpc85xx_rds_pic_init(void)
+static void __init mpc85xx_rdb_pic_init(void)
{
struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
MPIC_SINGLE_DEST_CPU,
mpic_init(mpic);
}
-static int __init p1023_rds_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- return of_flat_dt_is_compatible(root, "fsl,P1023RDS");
-
-}
-
static int __init p1023_rdb_probe(void)
{
unsigned long root = of_get_flat_dt_root();
}
-define_machine(p1023_rds) {
- .name = "P1023 RDS",
- .probe = p1023_rds_probe,
- .setup_arch = mpc85xx_rds_setup_arch,
- .init_IRQ = mpc85xx_rds_pic_init,
- .get_irq = mpic_get_irq,
- .restart = fsl_rstcr_restart,
- .calibrate_decr = generic_calibrate_decr,
- .progress = udbg_progress,
-#ifdef CONFIG_PCI
- .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
- .pcibios_fixup_phb = fsl_pcibios_fixup_phb,
-#endif
-};
-
define_machine(p1023_rdb) {
.name = "P1023 RDB",
.probe = p1023_rdb_probe,
- .setup_arch = mpc85xx_rds_setup_arch,
- .init_IRQ = mpc85xx_rds_pic_init,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
git.openpandora.org / pandora-kernel.git / commitdiff