staging: brcm80211: Fix some initialisation failure paths

Initialise wl_info::tasklet early so that it's safe to tasklet_kill()
it in wl_free().

Remove assertions from wl_free() that may not be true in case of
initialisation failure.

Call wl_release_fw() in case of failure after wl_request_fw().
Don't rely on wl_firmware::fw_cnt in wl_release_fw().

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/staging/brcm80211/TODO b/drivers/staging/brcm80211/TODO
index aa38d49..5870bca 100644 (file)
--- a/drivers/staging/brcm80211/TODO
+++ b/drivers/staging/brcm80211/TODO
@@ -25,7 +25,6 @@ Bugs
 - Various occasional asserts/hangs
 - Scanning during data transfer sometimes causes major slowdowns.  Sometimes
   revcovers when scan is done, other times not.
-- Driver does not handle missing firmware gracefully.
 - Mac80211 API not completely implemented (ie ops_bss_info_changed,
   ops_get_stats, etc)
 

diff --git a/drivers/staging/brcm80211/sys/wl_mac80211.c b/drivers/staging/brcm80211/sys/wl_mac80211.c
index d73ec44..3e0c450 100644 (file)
--- a/drivers/staging/brcm80211/sys/wl_mac80211.c
+++ b/drivers/staging/brcm80211/sys/wl_mac80211.c
@@ -837,6 +837,9 @@ static wl_info_t *wl_attach(uint16 vendor, uint16 device, ulong regs,
        wl->osh = osh;
        atomic_set(&wl->callbacks, 0);
 
+       /* setup the bottom half handler */
+       tasklet_init(&wl->tasklet, wl_dpc, (ulong) wl);
+
 #ifdef WLC_HIGH_ONLY
        wl->rpc_th = bcm_rpc_tp_attach(osh, NULL);
        if (wl->rpc_th == NULL) {
@@ -905,17 +908,16 @@ static wl_info_t *wl_attach(uint16 vendor, uint16 device, ulong regs,
 #endif
 
        /* common load-time initialization */
-       if (!
-           (wl->wlc =
-            wlc_attach((void *)wl, vendor, device, unit, wl->piomode, osh,
-                       wl->regsva, wl->bcm_bustype, btparam, &err))) {
+       wl->wlc = wlc_attach((void *)wl, vendor, device, unit, wl->piomode, osh,
+                            wl->regsva, wl->bcm_bustype, btparam, &err);
+#ifndef WLC_HIGH_ONLY
+       wl_release_fw(wl);
+#endif
+       if (!wl->wlc) {
                printf("%s: %s driver failed with code %d\n", KBUILD_MODNAME,
                       EPI_VERSION_STR, err);
                goto fail;
        }
-#ifndef WLC_HIGH_ONLY
-       wl_release_fw(wl);
-#endif
        wl->pub = wlc_pub(wl->wlc);
 
        wl->pub->ieee_hw = hw;
@@ -942,9 +944,6 @@ static wl_info_t *wl_attach(uint16 vendor, uint16 device, ulong regs,
        wlc_iovar_setint(wl->wlc, "sd_drivestrength", sd_drivestrength);
 #endif
 
-       /* setup the bottom half handler */
-       tasklet_init(&wl->tasklet, wl_dpc, (ulong) wl);
-
 #ifdef WLC_LOW
        /* register our interrupt handler */
        if (request_irq(irq, wl_isr, IRQF_SHARED, KBUILD_MODNAME, wl)) {
@@ -1710,11 +1709,9 @@ void wl_free(wl_info_t * wl)
 
        ASSERT(wl);
 #ifndef WLC_HIGH_ONLY
-       ASSERT(wl->irq);        /* bmac does not use direct interrupt */
        /* free ucode data */
        if (wl->fw.fw_cnt)
                wl_ucode_data_free();
-       ASSERT(wl->wlc);
        if (wl->irq)
                free_irq(wl->irq, wl);
 #endif
@@ -2509,6 +2506,7 @@ static int wl_request_fw(wl_info_t * wl, struct pci_dev *pdev)
                status = request_firmware(&wl->fw.fw_bin[i], fw_name, device);
                if (status) {
                        printf("fail to request firmware %s\n", fw_name);
+                       wl_release_fw(wl);
                        return status;
                }
                WL_NONE(("request fw %s\n", fw_name));
@@ -2517,6 +2515,7 @@ static int wl_request_fw(wl_info_t * wl, struct pci_dev *pdev)
                status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device);
                if (status) {
                        printf("fail to request firmware %s\n", fw_name);
+                       wl_release_fw(wl);
                        return status;
                }
                wl->fw.hdr_num_entries[i] =
@@ -2539,7 +2538,7 @@ void wl_ucode_free_buf(void *p)
 static void wl_release_fw(wl_info_t * wl)
 {
        int i;
-       for (i = 0; i < wl->fw.fw_cnt; i++) {
+       for (i = 0; i < WL_MAX_FW; i++) {
                release_firmware(wl->fw.fw_bin[i]);
                release_firmware(wl->fw.fw_hdr[i]);
        }