order. If you could add yourselves to it in alphabetical order that would be
so much easier [Ed]
- - P: Person (obsolete)
- - M: Mail patches to: FullName <address@domain>
- P: Person
- M: Mail patches to
- - - L: Mailing list that is relevant to this area
- - - W: Web-page with status/info
- - - T: SCM tree type and location. Type is one of: git, hg, quilt, stgit.
- - - S: Status, one of the following:
- - -
- - - Supported: Someone is actually paid to look after this.
- - - Maintained: Someone actually looks after it.
- - - Odd Fixes: It has a maintainer but they don't have time to do
- - - much other than throw the odd patch in. See below..
- - - Orphan: No current maintainer [but maybe you could take the
- - - role as you write your new code].
- - - Obsolete: Old code. Something tagged obsolete generally means
- - - it has been replaced by a better system and you
- - - should be using that.
+ + + Maintainers List (try to look for most precise areas first)
- - - F: Files and directories with wildcard patterns.
- - - A trailing slash includes all files and subdirectory files.
- - - F: drivers/net/ all files in and below drivers/net
- - - F: drivers/net/* all files in drivers/net, but not below
- - - F: */net/* all files in "any top level directory"/net
- - - One pattern per line. Multiple F: lines acceptable.
- - - X: Files and directories that are NOT maintained, same rules as F:
- - - Files exclusions are tested before file matches.
- - - Can be useful for excluding a specific subdirectory, for instance:
- - - F: net/
- - - X: net/ipv6/
- - - matches all files in and below net excluding net/ipv6/
+ + + -----------------------------------
3C505 NETWORK DRIVER
- P: Philip Blundell
- M: philb@gnu.org
+ M: Philip Blundell <philb@gnu.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/3c505*
F: drivers/net/ax88796.c
9P FILE SYSTEM
- P: Eric Van Hensbergen
- M: ericvh@gmail.com
- P: Ron Minnich
- M: rminnich@sandia.gov
- P: Latchesar Ionkov
- M: lucho@ionkov.net
+ M: Eric Van Hensbergen <ericvh@gmail.com>
+ M: Ron Minnich <rminnich@sandia.gov>
+ M: Latchesar Ionkov <lucho@ionkov.net>
L: v9fs-developer@lists.sourceforge.net
W: http://swik.net/v9fs
- - - T: git git://git.kernel.org/pub/scm/linux/kernel/ericvh/v9fs.git
+ + + T: git git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs.git
S: Maintained
F: Documentation/filesystems/9p.txt
F: fs/9p/
S: Orphan
F: drivers/mmc/host/mmci.*
++ + ++ARM PRIMECELL BUS SUPPORT
++ + ++M: Russell King <linux@arm.linux.org.uk>
++ + ++S: Maintained
++ + ++F: drivers/amba/
++ + ++F: include/linux/amba/bus.h
++ + ++
ARM/ADI ROADRUNNER MACHINE SUPPORT
- P: Lennert Buytenhek
- M: kernel@wantstofly.org
- L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+ M: Lennert Buytenhek <kernel@wantstofly.org>
+ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-ixp23xx/
F: arch/arm/mach-ixp23xx/include/mach/
S: Maintained
ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
- P: Michael Petchkovsky
- M: mkpetch@internode.on.net
+ M: Michael Petchkovsky <mkpetch@internode.on.net>
S: Maintained
+++++++ARM/NOMADIK ARCHITECTURE
+++++++M: Alessandro Rubini <rubini@unipv.it>
+++++++M: STEricsson <STEricsson_nomadik_linux@list.st.com>
+++++++L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+++++++S: Maintained
+++++++F: arch/arm/mach-nomadik/
+++++++F: arch/arm/plat-nomadik/
+++++++
ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
- P: Nelson Castillo
- M: arhuaco@freaks-unidos.net
+ M: Nelson Castillo <arhuaco@freaks-unidos.net>
L: openmoko-kernel@lists.openmoko.org (subscribers-only)
W: http://wiki.openmoko.org/wiki/Neo_FreeRunner
S: Supported
W: http://www.mcuos.com
S: Maintained
+++++++ ARM/U8500 ARM ARCHITECTURE
+++++++ M: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+++++++ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+++++++ S: Maintained
+++++++ F: arch/arm/mach-ux500/
+++++++
ARM/VFP SUPPORT
- P: Russell King
- M: linux@arm.linux.org.uk
- L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+ M: Russell King <linux@arm.linux.org.uk>
+ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.arm.linux.org.uk/
S: Maintained
F: arch/arm/vfp/
F: drivers/net/atlx/
ATM
- P: Chas Williams
- M: chas@cmf.nrl.navy.mil
- L: linux-atm-general@lists.sourceforge.net (subscribers-only)
+ M: Chas Williams <chas@cmf.nrl.navy.mil>
- - L: linux-atm-general@lists.sourceforge.net (subscribers-only)
+ + + L: linux-atm-general@lists.sourceforge.net (moderated for non-subscribers)
L: netdev@vger.kernel.org
W: http://linux-atm.sourceforge.net
S: Maintained
F: drivers/serial/atmel_serial.c
ATMEL LCDFB DRIVER
- P: Nicolas Ferre
- M: nicolas.ferre@atmel.com
- L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+ M: Nicolas Ferre <nicolas.ferre@atmel.com>
-- --L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
++ + ++L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/video/atmel_lcdfb.c
F: include/video/atmel_lcdc.h
S: Supported
F: drivers/net/tg3.*
- - P: Jing Huang
- - M: huangj@brocade.com
- - L: linux-scsi@vger.kernel.org
- - S: Supported
- - F: drivers/scsi/bfa/
+ BROCADE BFA FC SCSI DRIVER
+ + + M: Jing Huang <huangj@brocade.com>
+ + + L: linux-scsi@vger.kernel.org
+ + + S: Supported
+ + + F: drivers/scsi/bfa/
+
BSG (block layer generic sg v4 driver)
- P: FUJITA Tomonori
- M: fujita.tomonori@lab.ntt.co.jp
+ M: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
L: linux-scsi@vger.kernel.org
S: Supported
F: block/bsg.c
F: mm/*cgroup*
CORETEMP HARDWARE MONITORING DRIVER
- P: Rudolf Marek
- M: r.marek@assembler.cz
+ M: Rudolf Marek <r.marek@assembler.cz>
+ + + M: Huaxu Wan <huaxu.wan@intel.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/coretemp
F: drivers/i2c/busses/i2c-cpm.c
FREESCALE IMX / MXC FRAMEBUFFER DRIVER
- P: Sascha Hauer
- M: kernel@pengutronix.de
- L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
- L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+ M: Sascha Hauer <kernel@pengutronix.de>
-- --L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
++ + ++L: linux-fbdev@vger.kernel.org
+ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/plat-mxc/include/mach/imxfb.h
F: drivers/video/imxfb.c
F: arch/powerpc/sysdev/qe_lib/
F: arch/powerpc/include/asm/*qe.h
- - FREESCALE USB PERIPHERIAL DRIVERS
- FREESCALE HIGHSPEED USB DEVICE DRIVER
- P: Li Yang
- M: leoli@freescale.com
+ + + FREESCALE USB PERIPHERAL DRIVERS
+ M: Li Yang <leoli@freescale.com>
L: linux-usb@vger.kernel.org
L: linuxppc-dev@ozlabs.org
S: Maintained
F: fs/fscache/
F: include/linux/fscache*.h
- - TRACING
- - M: Steven Rostedt <rostedt@goodmis.org>
- - M: Frederic Weisbecker <fweisbec@gmail.com>
- - M: Ingo Molnar <mingo@redhat.com>
- - T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
- FTRACE
- P: Steven Rostedt
- M: rostedt@goodmis.org
- - - S: Maintained
- - - F: Documentation/trace/ftrace.txt
- - - F: arch/*/*/*/ftrace.h
- - - F: arch/*/kernel/ftrace.c
- - F: include/*/ftrace.h include/trace/ include/linux/trace*.h
- F: include/*/ftrace.h
- - - F: kernel/trace/
- - -
FUJITSU FR-V (FRV) PORT
- P: David Howells
- M: dhowells@redhat.com
+ M: David Howells <dhowells@redhat.com>
S: Maintained
F: arch/frv/
S: Maintained
F: include/asm-generic
- - M: Michael S. Tsirkin <mst@redhat.com>
+ GENERIC UIO DRIVER FOR PCI DEVICES
- - L: linux-kernel@vger.kernel.org
+ + + M: "Michael S. Tsirkin" <mst@redhat.com>
+ L: kvm@vger.kernel.org
+ S: Supported
+ F: drivers/uio/uio_pci_generic.c
+
GFS2 FILE SYSTEM
- P: Steven Whitehouse
- M: swhiteho@redhat.com
+ M: Steven Whitehouse <swhiteho@redhat.com>
L: cluster-devel@redhat.com
W: http://sources.redhat.com/cluster/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes.git
S: Maintained
F: drivers/media/video/gspca/finepix.c
++ + ++GSPCA GL860 SUBDRIVER
++ + ++M: Olivier Lorin <o.lorin@laposte.net>
++ + ++L: linux-media@vger.kernel.org
++ + ++T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
++ + ++S: Maintained
++ + ++F: drivers/media/video/gspca/gl860/
++ + ++
GSPCA M5602 SUBDRIVER
- P: Erik Andren
- M: erik.andren@gmail.com
+ M: Erik Andren <erik.andren@gmail.com>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
F: Documentation/i2c/
F: drivers/i2c/
F: include/linux/i2c.h
-- - --F: include/linux/i2c-dev.h
-- - --F: include/linux/i2c-id.h
++ + ++F: include/linux/i2c-*.h
I2C-TINY-USB DRIVER
- P: Till Harbaum
- M: till@harbaum.org
+ M: Till Harbaum <till@harbaum.org>
L: linux-i2c@vger.kernel.org
W: http://www.harbaum.org/till/i2c_tiny_usb
S: Maintained
F: drivers/input/
INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
- P: Sylvain Meyer
- M: sylvain.meyer@worldonline.fr
- L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+ M: Sylvain Meyer <sylvain.meyer@worldonline.fr>
-- --L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
++ + ++L: linux-fbdev@vger.kernel.org
S: Maintained
F: Documentation/fb/intelfb.txt
F: drivers/video/intelfb/
INTEL 810/815 FRAMEBUFFER DRIVER
- P: Antonino Daplas
- M: adaplas@gmail.com
- L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+ M: Antonino Daplas <adaplas@gmail.com>
-- --L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
++ + ++L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/video/i810/
F: drivers/infiniband/hw/ipath/
IPMI SUBSYSTEM
- P: Corey Minyard
- M: minyard@acm.org
- L: openipmi-developer@lists.sourceforge.net
+ M: Corey Minyard <minyard@acm.org>
- - L: openipmi-developer@lists.sourceforge.net
+ + + L: openipmi-developer@lists.sourceforge.net (moderated for non-subscribers)
W: http://openipmi.sourceforge.net/
S: Supported
F: Documentation/IPMI.txt
F: scripts/Makefile.*
KERNEL JANITORS
- P: Several
L: kernel-janitors@vger.kernel.org
- - - W: http://www.kerneljanitors.org/
- - - S: Maintained
+ + + W: http://janitor.kernelnewbies.org/
+ + + S: Odd Fixes
KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
- P: J. Bruce Fields
- M: bfields@fieldses.org
- P: Neil Brown
- M: neilb@suse.de
+ M: "J. Bruce Fields" <bfields@fieldses.org>
+ M: Neil Brown <neilb@suse.de>
L: linux-nfs@vger.kernel.org
W: http://nfs.sourceforge.net/
S: Supported
F: kernel/kgdb.c
KMEMCHECK
- P: Vegard Nossum
- M: vegardno@ifi.uio.no
- P Pekka Enberg
- M: penberg@cs.helsinki.fi
- L: linux-kernel@vger.kernel.org
+ M: Vegard Nossum <vegardno@ifi.uio.no>
- - P Pekka Enberg
- - M: penberg@cs.helsinki.fi
+ + + M: Pekka Enberg <penberg@cs.helsinki.fi>
S: Maintained
+ + + F: Documentation/kmemcheck.txt
+ + + F: arch/x86/include/asm/kmemcheck.h
+ + + F: arch/x86/mm/kmemcheck/
+ + + F: include/linux/kmemcheck.h
+ + + F: mm/kmemcheck.c
KMEMLEAK
- P: Catalin Marinas
- M: catalin.marinas@arm.com
- L: linux-kernel@vger.kernel.org
+ M: Catalin Marinas <catalin.marinas@arm.com>
S: Maintained
F: Documentation/kmemleak.txt
F: include/linux/kmemleak.h
S: Supported
MATROX FRAMEBUFFER DRIVER
- P: Petr Vandrovec
- M: vandrove@vc.cvut.cz
- L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+ M: Petr Vandrovec <vandrove@vc.cvut.cz>
-- --L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
++ + ++L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/video/matrox/matroxfb_*
F: include/linux/matroxfb.h
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
- - T: git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
+ + + T: git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
S: Supported
F: include/linux/netfilter*
F: include/linux/netfilter/
F: drivers/block/nbd.c
F: include/linux/nbd.h
+ NETWORK DROP MONITOR
+ M: Neil Horman <nhorman@tuxdriver.com>
+ L: netdev@vger.kernel.org
+ S: Maintained
+ W: https://fedorahosted.org/dropwatch/
+ F: net/core/drop_monitor.c
+
NETWORKING [GENERAL]
- P: David S. Miller
- M: davem@davemloft.net
+ M: "David S. Miller" <davem@davemloft.net>
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net
+ W: http://patchwork.ozlabs.org/project/netdev/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
+ + + T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
S: Maintained
F: net/
F: include/net/
F: fs/ntfs/
NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER
- P: Antonino Daplas
- M: adaplas@gmail.com
- L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+ M: Antonino Daplas <adaplas@gmail.com>
-- --L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
++ + ++L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/video/riva/
F: drivers/video/nvidia/
OMAP SUPPORT
- - M: "Tony Lindgren <tony@atomide.com>" <tony@atomide.com>
- P: Tony Lindgren <tony@atomide.com>
- M: tony@atomide.com
+ + + M: Tony Lindgren <tony@atomide.com>
L: linux-omap@vger.kernel.org
W: http://www.muru.com/linux/omap/
W: http://linux.omap.com/
F: sound/soc/omap/
OMAP FRAMEBUFFER SUPPORT
- P: Imre Deak
- M: imre.deak@nokia.com
- L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+ M: Imre Deak <imre.deak@nokia.com>
-- --L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
++ + ++L: linux-fbdev@vger.kernel.org
L: linux-omap@vger.kernel.org
S: Maintained
F: drivers/video/omap/
F: Documentation/i2c/busses/i2c-ocores
F: drivers/i2c/busses/i2c-ocores.c
+ + + OPEN FIRMWARE AND FLATTENED DEVICE TREE
+ + + M: Grant Likely <grant.likely@secretlab.ca>
+ + + L: devicetree-discuss@lists.ozlabs.org
+ + + W: http://fdt.secretlab.ca
+ + + S: Maintained
+ + + F: drivers/of
+ + + F: include/linux/of*.h
+ + + K: of_get_property
+ + +
OPROFILE
- P: Robert Richter
- M: robert.richter@amd.com
+ M: Robert Richter <robert.richter@amd.com>
L: oprofile-list@lists.sf.net
S: Maintained
F: arch/*/oprofile/
F: include/linux/qnxtypes.h
RADEON FRAMEBUFFER DISPLAY DRIVER
- P: Benjamin Herrenschmidt
- M: benh@kernel.crashing.org
- L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+ M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-- --L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
++ + ++L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/video/aty/radeon*
F: include/linux/radeonfb.h
RAGE128 FRAMEBUFFER DISPLAY DRIVER
- P: Paul Mackerras
- M: paulus@samba.org
- L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+ M: Paul Mackerras <paulus@samba.org>
-- --L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
++ + ++L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/video/aty/aty128fb.c
F: fs/reiserfs/
RFKILL
- P: Johannes Berg
- M: johannes@sipsolutions.net
+ M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
S: Maintained
- - - F Documentation/rfkill.txt
+ + + F: Documentation/rfkill.txt
F: net/rfkill/
RISCOM8 DRIVER
F: drivers/net/wireless/rtl818x/rtl8187*
S3 SAVAGE FRAMEBUFFER DRIVER
- P: Antonino Daplas
- M: adaplas@gmail.com
- L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+ M: Antonino Daplas <adaplas@gmail.com>
-- --L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
++ + ++L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/video/savage/
F: kernel/sched*
F: include/linux/sched.h
- - P: Chen Liqin
- - M: liqin.chen@sunplusct.com
- - P: Lennox Wu
- - M: lennox.wu@gmail.com
+ SCORE ARCHITECTURE
+ + + M: Chen Liqin <liqin.chen@sunplusct.com>
+ + + M: Lennox Wu <lennox.wu@gmail.com>
+ W: http://www.sunplusct.com
+ S: Supported
+ + + F: arch/score/
+
SCSI CDROM DRIVER
- P: Jens Axboe
- M: axboe@kernel.dk
+ M: Jens Axboe <axboe@kernel.dk>
L: linux-scsi@vger.kernel.org
W: http://www.kernel.dk
S: Maintained
F: drivers/mmc/host/sdricoh_cs.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
- - S: Orphan
- - L: linux-mmc@vger.kernel.org
- - F: drivers/mmc/host/sdhci.*
- P: Pierre Ossman
- M: pierre@ossman.eu
- L: sdhci-devel@lists.ossman.eu
- S: Maintained
+ + + S: Orphan
+ + + L: linux-mmc@vger.kernel.org
+ + + F: drivers/mmc/host/sdhci.*
SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
- P: Anton Vorontsov
- M: avorontsov@ru.mvista.com
+ M: Anton Vorontsov <avorontsov@ru.mvista.com>
L: linuxppc-dev@ozlabs.org
- - L: linux-mmc@vger.kernel.org
- L: sdhci-devel@lists.ossman.eu
+ + + L: linux-mmc@vger.kernel.org
S: Maintained
- - F: drivers/mmc/host/sdhci-of.*
- F: drivers/mmc/host/sdhci.*
+ + + F: drivers/mmc/host/sdhci-of.*
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
- P: Ben Dooks
- M: ben-linux@fluff.org
- L: sdhci-devel@lists.ossman.eu
+ M: Ben Dooks <ben-linux@fluff.org>
- - L: linux-mmc@vger.kernel.org
+ + + L: linux-mmc@vger.kernel.org
S: Maintained
F: drivers/mmc/host/sdhci-s3c.c
SECURITY SUBSYSTEM
- P: James Morris
- M: jmorris@namei.org
+ M: James Morris <jmorris@namei.org>
L: linux-security-module@vger.kernel.org (suggested Cc:)
- - - T: git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
+ + + T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
W: http://security.wiki.kernel.org/
S: Supported
F: security/
F: include/linux/ata.h
F: include/linux/libata.h
- - P: Jayamohan Kallickal
- - M: jayamohank@serverengines.com
- - L: linux-scsi@vger.kernel.org
- - W: http://www.serverengines.com
- - S: Supported
- - F: drivers/scsi/be2iscsi/
+ SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
+ + + M: Jayamohan Kallickal <jayamohank@serverengines.com>
+ + + L: linux-scsi@vger.kernel.org
+ + + W: http://www.serverengines.com
+ + + S: Supported
+ + + F: drivers/scsi/be2iscsi/
+
SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
- P: Sathya Perla
- M: sathyap@serverengines.com
- P: Subbu Seetharaman
- M: subbus@serverengines.com
+ M: Sathya Perla <sathyap@serverengines.com>
+ M: Subbu Seetharaman <subbus@serverengines.com>
L: netdev@vger.kernel.org
W: http://www.serverengines.com
S: Supported
F: drivers/usb/gadget/lh7a40*
F: drivers/usb/host/ohci-lh7a40*
- SHPC HOTPLUG DRIVER
- P: Kristen Carlson Accardi
- M: kristen.c.accardi@intel.com
- L: linux-pci@vger.kernel.org
+ SIMPLE FIRMWARE INTERFACE (SFI)
- - P: Len Brown
- - M: lenb@kernel.org
+ + + M: Len Brown <lenb@kernel.org>
+ L: sfi-devel@simplefirmware.org
+ W: http://simplefirmware.org/
+ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6.git
S: Supported
- F: drivers/pci/hotplug/shpchp*
+ F: arch/x86/kernel/*sfi*
+ F: drivers/sfi/
+ F: include/linux/sfi*.h
SIMTEC EB110ATX (Chalice CATS)
P: Ben Dooks
S: Maintained
F: drivers/char/tpm/
+ + + TRACING
+ + + M: Steven Rostedt <rostedt@goodmis.org>
+ + + M: Frederic Weisbecker <fweisbec@gmail.com>
+ + + M: Ingo Molnar <mingo@redhat.com>
+ + + T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
+ + + S: Maintained
+ + + F: Documentation/trace/ftrace.txt
+ + + F: arch/*/*/*/ftrace.h
+ + + F: arch/*/kernel/ftrace.c
+ + + F: include/*/ftrace.h
+ + + F: include/linux/trace*.h
+ + + F: include/trace/
+ + + F: kernel/trace/
+ + +
TRIVIAL PATCHES
- P: Jiri Kosina
- M: trivial@kernel.org
+ M: Jiri Kosina <trivial@kernel.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
S: Maintained
+
+ TTY LAYER
+ M: Greg Kroah-Hartman <gregkh@suse.de>
+ S: Maintained
+ T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
F: drivers/char/tty_*
F: drivers/serial/serial_core.c
F: include/linux/serial_core.h
S: Maintained
UVESAFB DRIVER
- P: Michal Januszewski
- M: spock@gentoo.org
- L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+ M: Michal Januszewski <spock@gentoo.org>
-- --L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
++ + ++L: linux-fbdev@vger.kernel.org
W: http://dev.gentoo.org/~spock/projects/uvesafb/
S: Maintained
F: Documentation/fb/uvesafb.txt
F: drivers/mmc/host/via-sdmmc.c
VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
- P: Joseph Chan
- M: JosephChan@via.com.tw
- P: Scott Fang
- M: ScottFang@viatech.com.cn
- L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+ M: Joseph Chan <JosephChan@via.com.tw>
+ M: Scott Fang <ScottFang@viatech.com.cn>
-- --L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
++ + ++L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/video/via/
F: drivers/vlynq/vlynq.c
F: include/linux/vlynq.h
- - M: Shreyas Bhatewara <sbhatewara@vmware.com>
- - M: VMware, Inc. <pv-drivers@vmware.com>
- - L: netdev@vger.kernel.org
- - S: Maintained
- - F: drivers/net/vmxnet3/
+ VMWARE VMXNET3 ETHERNET DRIVER
+ + + M: Shreyas Bhatewara <sbhatewara@vmware.com>
+ + + M: "VMware, Inc." <pv-drivers@vmware.com>
+ + + L: netdev@vger.kernel.org
+ + + S: Maintained
+ + + F: drivers/net/vmxnet3/
+
VOLTAGE AND CURRENT REGULATOR FRAMEWORK
- P: Liam Girdwood
- M: lrg@slimlogic.co.uk
- P: Mark Brown
- M: broonie@opensource.wolfsonmicro.com
+ M: Liam Girdwood <lrg@slimlogic.co.uk>
+ M: Mark Brown <broonie@opensource.wolfsonmicro.com>
W: http://opensource.wolfsonmicro.com/node/15
W: http://www.slimlogic.co.uk/?p=48
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git
S: Maintained
F: drivers/scsi/wd7000.c
- - P: David Härdeman
- - M: david@hardeman.nu
+ WINBOND CIR DRIVER
+ + + M: David Härdeman <david@hardeman.nu>
+ S: Maintained
+ F: drivers/input/misc/winbond-cir.c
+
WIMAX STACK
- P: Inaky Perez-Gonzalez
- M: inaky.perez-gonzalez@intel.com
+ M: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
M: linux-wimax@intel.com
L: wimax@linuxwimax.org
S: Supported
F: drivers/input/touchscreen/*wm97*
F: include/linux/wm97xx.h
- - P: Mark Brown
- - M: broonie@opensource.wolfsonmicro.com
- - L: linux-kernel@vger.kernel.org
+ WOLFSON MICROELECTRONICS PMIC DRIVERS
+ + + M: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
+ W: http://opensource.wolfsonmicro.com/node/8
+ S: Supported
+ F: drivers/leds/leds-wm83*.c
+ F: drivers/mfd/wm8*.c
+ F: drivers/power/wm83*.c
+ F: drivers/rtc/rtc-wm83*.c
+ F: drivers/regulator/wm8*.c
+ F: drivers/video/backlight/wm83*_bl.c
+ F: drivers/watchdog/wm83*_wdt.c
+ F: include/linux/mfd/wm831x/
+ F: include/linux/mfd/wm8350/
+ F: include/linux/mfd/wm8400/
+ F: sound/soc/codecs/wm8350.c
+ F: sound/soc/codecs/wm8400.c
+
X.25 NETWORK LAYER
- P: Henner Eisen
- M: eis@baty.hanse.de
+ M: Henner Eisen <eis@baty.hanse.de>
L: linux-x25@vger.kernel.org
S: Maintained
F: Documentation/networking/x25*
--- /dev/null
- - #if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+ /*
+ * On-Chip devices setup code for the AT91SAM9G45 family
+ *
+ * Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
+
+ #include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
+ #include <linux/i2c-gpio.h>
+
+ #include <linux/fb.h>
+ #include <video/atmel_lcdc.h>
+
+ #include <mach/board.h>
+ #include <mach/gpio.h>
+ #include <mach/at91sam9g45.h>
+ #include <mach/at91sam9g45_matrix.h>
+ #include <mach/at91sam9_smc.h>
+ #include <mach/at_hdmac.h>
+
+ #include "generic.h"
+
+
+ /* --------------------------------------------------------------------
+ * HDMAC - AHB DMA Controller
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
+ static u64 hdmac_dmamask = DMA_BIT_MASK(32);
+
+ static struct at_dma_platform_data atdma_pdata = {
+ .nr_channels = 8,
+ };
+
+ static struct resource hdmac_resources[] = {
+ [0] = {
+ .start = AT91_BASE_SYS + AT91_DMA,
+ .end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = AT91SAM9G45_ID_DMA,
+ .end = AT91SAM9G45_ID_DMA,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct platform_device at_hdmac_device = {
+ .name = "at_hdmac",
+ .id = -1,
+ .dev = {
+ .dma_mask = &hdmac_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &atdma_pdata,
+ },
+ .resource = hdmac_resources,
+ .num_resources = ARRAY_SIZE(hdmac_resources),
+ };
+
+ void __init at91_add_device_hdmac(void)
+ {
+ dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
+ dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
+ platform_device_register(&at_hdmac_device);
+ }
+ #else
+ void __init at91_add_device_hdmac(void) {}
+ #endif
+
+
+ /* --------------------------------------------------------------------
+ * USB Host (OHCI)
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ static u64 ohci_dmamask = DMA_BIT_MASK(32);
+ static struct at91_usbh_data usbh_ohci_data;
+
+ static struct resource usbh_ohci_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_OHCI_BASE,
+ .end = AT91SAM9G45_OHCI_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_UHPHS,
+ .end = AT91SAM9G45_ID_UHPHS,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct platform_device at91_usbh_ohci_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_ohci_data,
+ },
+ .resource = usbh_ohci_resources,
+ .num_resources = ARRAY_SIZE(usbh_ohci_resources),
+ };
+
+ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
+ {
+ int i;
+
+ if (!data)
+ return;
+
+ /* Enable VBus control for UHP ports */
+ for (i = 0; i < data->ports; i++) {
+ if (data->vbus_pin[i])
+ at91_set_gpio_output(data->vbus_pin[i], 0);
+ }
+
+ usbh_ohci_data = *data;
+ platform_device_register(&at91_usbh_ohci_device);
+ }
+ #else
+ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
+ #endif
+
+
+ ++++++/* --------------------------------------------------------------------
+ ++++++ * USB Host HS (EHCI)
+ ++++++ * Needs an OHCI host for low and full speed management
+ ++++++ * -------------------------------------------------------------------- */
+ ++++++
+ ++++++#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+ ++++++static u64 ehci_dmamask = DMA_BIT_MASK(32);
+ ++++++static struct at91_usbh_data usbh_ehci_data;
+ ++++++
+ ++++++static struct resource usbh_ehci_resources[] = {
+ ++++++ [0] = {
+ ++++++ .start = AT91SAM9G45_EHCI_BASE,
+ ++++++ .end = AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
+ ++++++ .flags = IORESOURCE_MEM,
+ ++++++ },
+ ++++++ [1] = {
+ ++++++ .start = AT91SAM9G45_ID_UHPHS,
+ ++++++ .end = AT91SAM9G45_ID_UHPHS,
+ ++++++ .flags = IORESOURCE_IRQ,
+ ++++++ },
+ ++++++};
+ ++++++
+ ++++++static struct platform_device at91_usbh_ehci_device = {
+ ++++++ .name = "atmel-ehci",
+ ++++++ .id = -1,
+ ++++++ .dev = {
+ ++++++ .dma_mask = &ehci_dmamask,
+ ++++++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ ++++++ .platform_data = &usbh_ehci_data,
+ ++++++ },
+ ++++++ .resource = usbh_ehci_resources,
+ ++++++ .num_resources = ARRAY_SIZE(usbh_ehci_resources),
+ ++++++};
+ ++++++
+ ++++++void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
+ ++++++{
+ ++++++ int i;
+ ++++++
+ ++++++ if (!data)
+ ++++++ return;
+ ++++++
+ ++++++ /* Enable VBus control for UHP ports */
+ ++++++ for (i = 0; i < data->ports; i++) {
+ ++++++ if (data->vbus_pin[i])
+ ++++++ at91_set_gpio_output(data->vbus_pin[i], 0);
+ ++++++ }
+ ++++++
+ ++++++ usbh_ehci_data = *data;
+ ++++++ at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk");
+ ++++++ platform_device_register(&at91_usbh_ehci_device);
+ ++++++}
+ ++++++#else
+ ++++++void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
+ ++++++#endif
+ ++++++
+ ++++++
+ /* --------------------------------------------------------------------
+ * USB HS Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+ static struct resource usba_udc_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_UDPHS_FIFO,
+ .end = AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_BASE_UDPHS,
+ .end = AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = AT91SAM9G45_ID_UDPHS,
+ .end = AT91SAM9G45_ID_UDPHS,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ #define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
+ [idx] = { \
+ .name = nam, \
+ .index = idx, \
+ .fifo_size = maxpkt, \
+ .nr_banks = maxbk, \
+ .can_dma = dma, \
+ .can_isoc = isoc, \
+ }
+
+ static struct usba_ep_data usba_udc_ep[] __initdata = {
+ EP("ep0", 0, 64, 1, 0, 0),
+ EP("ep1", 1, 1024, 2, 1, 1),
+ EP("ep2", 2, 1024, 2, 1, 1),
+ EP("ep3", 3, 1024, 3, 1, 0),
+ EP("ep4", 4, 1024, 3, 1, 0),
+ EP("ep5", 5, 1024, 3, 1, 1),
+ EP("ep6", 6, 1024, 3, 1, 1),
+ };
+
+ #undef EP
+
+ /*
+ * pdata doesn't have room for any endpoints, so we need to
+ * append room for the ones we need right after it.
+ */
+ static struct {
+ struct usba_platform_data pdata;
+ struct usba_ep_data ep[7];
+ } usba_udc_data;
+
+ static struct platform_device at91_usba_udc_device = {
+ .name = "atmel_usba_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &usba_udc_data.pdata,
+ },
+ .resource = usba_udc_resources,
+ .num_resources = ARRAY_SIZE(usba_udc_resources),
+ };
+
+ void __init at91_add_device_usba(struct usba_platform_data *data)
+ {
+ usba_udc_data.pdata.vbus_pin = -EINVAL;
+ usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
+ memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+
+ if (data && data->vbus_pin > 0) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ usba_udc_data.pdata.vbus_pin = data->vbus_pin;
+ }
+
+ /* Pullup pin is handled internally by USB device peripheral */
+
+ /* Clocks */
+ at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
+ at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
+
+ platform_device_register(&at91_usba_udc_device);
+ }
+ #else
+ void __init at91_add_device_usba(struct usba_platform_data *data) {}
+ #endif
+
+
+ /* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+ static u64 eth_dmamask = DMA_BIT_MASK(32);
+ static struct at91_eth_data eth_data;
+
+ static struct resource eth_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_EMAC,
+ .end = AT91SAM9G45_BASE_EMAC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_EMAC,
+ .end = AT91SAM9G45_ID_EMAC,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct platform_device at91sam9g45_eth_device = {
+ .name = "macb",
+ .id = -1,
+ .dev = {
+ .dma_mask = ð_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = ð_data,
+ },
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
+ };
+
+ void __init at91_add_device_eth(struct at91_eth_data *data)
+ {
+ if (!data)
+ return;
+
+ if (data->phy_irq_pin) {
+ at91_set_gpio_input(data->phy_irq_pin, 0);
+ at91_set_deglitch(data->phy_irq_pin, 1);
+ }
+
+ /* Pins used for MII and RMII */
+ at91_set_A_periph(AT91_PIN_PA17, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PA15, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PA16, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PA11, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PA19, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PA18, 0); /* EMDC */
+
+ if (!data->is_rmii) {
+ at91_set_B_periph(AT91_PIN_PA29, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PA30, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PA8, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PA9, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PA28, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PA6, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PA7, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PA27, 0); /* ETXER */
+ }
+
+ eth_data = *data;
+ platform_device_register(&at91sam9g45_eth_device);
+ }
+ #else
+ void __init at91_add_device_eth(struct at91_eth_data *data) {}
+ #endif
+
+
+ /* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+ static struct atmel_nand_data nand_data;
+
+ #define NAND_BASE AT91_CHIPSELECT_3
+
+ static struct resource nand_resources[] = {
+ [0] = {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_BASE_SYS + AT91_ECC,
+ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+ };
+
+ static struct platform_device at91sam9g45_nand_device = {
+ .name = "atmel_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+ };
+
+ void __init at91_add_device_nand(struct atmel_nand_data *data)
+ {
+ unsigned long csa;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ nand_data = *data;
+ platform_device_register(&at91sam9g45_nand_device);
+ }
+ #else
+ void __init at91_add_device_nand(struct atmel_nand_data *data) {}
+ #endif
+
+
+ /* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+ /*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+ #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+ static struct i2c_gpio_platform_data pdata_i2c0 = {
+ .sda_pin = AT91_PIN_PA20,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PA21,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+ };
+
+ static struct platform_device at91sam9g45_twi0_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev.platform_data = &pdata_i2c0,
+ };
+
+ static struct i2c_gpio_platform_data pdata_i2c1 = {
+ .sda_pin = AT91_PIN_PB10,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PB11,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+ };
+
+ static struct platform_device at91sam9g45_twi1_device = {
+ .name = "i2c-gpio",
+ .id = 1,
+ .dev.platform_data = &pdata_i2c1,
+ };
+
+ void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+ {
+ i2c_register_board_info(i2c_id, devices, nr_devices);
+
+ if (i2c_id == 0) {
+ at91_set_GPIO_periph(AT91_PIN_PA20, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PA20, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PA21, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PA21, 1);
+
+ platform_device_register(&at91sam9g45_twi0_device);
+ } else {
+ at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PB10, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PB11, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PB11, 1);
+
+ platform_device_register(&at91sam9g45_twi1_device);
+ }
+ }
+
+ #elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+ static struct resource twi0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TWI0,
+ .end = AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TWI0,
+ .end = AT91SAM9G45_ID_TWI0,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct platform_device at91sam9g45_twi0_device = {
+ .name = "at91_i2c",
+ .id = 0,
+ .resource = twi0_resources,
+ .num_resources = ARRAY_SIZE(twi0_resources),
+ };
+
+ static struct resource twi1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TWI1,
+ .end = AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TWI1,
+ .end = AT91SAM9G45_ID_TWI1,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct platform_device at91sam9g45_twi1_device = {
+ .name = "at91_i2c",
+ .id = 1,
+ .resource = twi1_resources,
+ .num_resources = ARRAY_SIZE(twi1_resources),
+ };
+
+ void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+ {
+ i2c_register_board_info(i2c_id, devices, nr_devices);
+
+ /* pins used for TWI interface */
+ if (i2c_id == 0) {
+ at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PA20, 1);
+
+ at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PA21, 1);
+
+ platform_device_register(&at91sam9g45_twi0_device);
+ } else {
+ at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PB10, 1);
+
+ at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PB11, 1);
+
+ platform_device_register(&at91sam9g45_twi1_device);
+ }
+ }
+ #else
+ void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
+ #endif
+
+
+ /* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+ static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+ static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_SPI0,
+ .end = AT91SAM9G45_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_SPI0,
+ .end = AT91SAM9G45_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct platform_device at91sam9g45_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+ };
+
+ static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 };
+
+ static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_SPI1,
+ .end = AT91SAM9G45_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_SPI1,
+ .end = AT91SAM9G45_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct platform_device at91sam9g45_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+ };
+
+ static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 };
+
+ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+ {
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */
+
+ at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk");
+ platform_device_register(&at91sam9g45_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk");
+ platform_device_register(&at91sam9g45_spi1_device);
+ }
+ }
+ #else
+ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+ #endif
+
+
+ /* --------------------------------------------------------------------
+ * AC97
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
+ static u64 ac97_dmamask = DMA_BIT_MASK(32);
+ static struct ac97c_platform_data ac97_data;
+
+ static struct resource ac97_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_AC97C,
+ .end = AT91SAM9G45_BASE_AC97C + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_AC97C,
+ .end = AT91SAM9G45_ID_AC97C,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct platform_device at91sam9g45_ac97_device = {
+ .name = "atmel_ac97c",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &ac97_data,
+ },
+ .resource = ac97_resources,
+ .num_resources = ARRAY_SIZE(ac97_resources),
+ };
+
+ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
+ {
+ if (!data)
+ return;
+
+ at91_set_A_periph(AT91_PIN_PD8, 0); /* AC97FS */
+ at91_set_A_periph(AT91_PIN_PD9, 0); /* AC97CK */
+ at91_set_A_periph(AT91_PIN_PD7, 0); /* AC97TX */
+ at91_set_A_periph(AT91_PIN_PD6, 0); /* AC97RX */
+
+ /* reset */
+ if (data->reset_pin)
+ at91_set_gpio_output(data->reset_pin, 0);
+
+ ac97_data = *data;
+ platform_device_register(&at91sam9g45_ac97_device);
+ }
+ #else
+ void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
+ #endif
+
+
+ /* --------------------------------------------------------------------
+ * LCD Controller
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+ static u64 lcdc_dmamask = DMA_BIT_MASK(32);
+ static struct atmel_lcdfb_info lcdc_data;
+
+ static struct resource lcdc_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_LCDC_BASE,
+ .end = AT91SAM9G45_LCDC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_LCDC,
+ .end = AT91SAM9G45_ID_LCDC,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct platform_device at91_lcdc_device = {
+ .name = "atmel_lcdfb",
+ .id = 0,
+ .dev = {
+ .dma_mask = &lcdc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &lcdc_data,
+ },
+ .resource = lcdc_resources,
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+ };
+
+ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+ {
+ if (!data)
+ return;
+
+ at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
+
+ at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */
+ at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PE6, 0); /* LCDDEN */
+ at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */
+ at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */
+ at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */
+ at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */
+ at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */
+ at91_set_A_periph(AT91_PIN_PE20, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */
+ at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */
+ at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */
+ at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */
+ at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */
+ at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */
+ at91_set_A_periph(AT91_PIN_PE28, 0); /* LCDD21 */
+ at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */
+ at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */
+
+ lcdc_data = *data;
+ platform_device_register(&at91_lcdc_device);
+ }
+ #else
+ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+ #endif
+
+
+ /* --------------------------------------------------------------------
+ * Timer/Counter block
+ * -------------------------------------------------------------------- */
+
+ #ifdef CONFIG_ATMEL_TCLIB
+ static struct resource tcb0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TCB0,
+ .end = AT91SAM9G45_BASE_TCB0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TCB,
+ .end = AT91SAM9G45_ID_TCB,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct platform_device at91sam9g45_tcb0_device = {
+ .name = "atmel_tcb",
+ .id = 0,
+ .resource = tcb0_resources,
+ .num_resources = ARRAY_SIZE(tcb0_resources),
+ };
+
+ /* TCB1 begins with TC3 */
+ static struct resource tcb1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TCB1,
+ .end = AT91SAM9G45_BASE_TCB1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TCB,
+ .end = AT91SAM9G45_ID_TCB,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct platform_device at91sam9g45_tcb1_device = {
+ .name = "atmel_tcb",
+ .id = 1,
+ .resource = tcb1_resources,
+ .num_resources = ARRAY_SIZE(tcb1_resources),
+ };
+
+ static void __init at91_add_device_tc(void)
+ {
+ /* this chip has one clock and irq for all six TC channels */
+ at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
+ platform_device_register(&at91sam9g45_tcb0_device);
+ at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
+ platform_device_register(&at91sam9g45_tcb1_device);
+ }
+ #else
+ static void __init at91_add_device_tc(void) { }
+ #endif
+
+
+ /* --------------------------------------------------------------------
+ * RTC
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+ static struct platform_device at91sam9g45_rtc_device = {
+ .name = "at91_rtc",
+ .id = -1,
+ .num_resources = 0,
+ };
+
+ static void __init at91_add_device_rtc(void)
+ {
+ platform_device_register(&at91sam9g45_rtc_device);
+ }
+ #else
+ static void __init at91_add_device_rtc(void) {}
+ #endif
+
+
+ /* --------------------------------------------------------------------
+ * RTT
+ * -------------------------------------------------------------------- */
+
+ static struct resource rtt_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT,
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+ };
+
+ static struct platform_device at91sam9g45_rtt_device = {
+ .name = "at91_rtt",
+ .id = 0,
+ .resource = rtt_resources,
+ .num_resources = ARRAY_SIZE(rtt_resources),
+ };
+
+ static void __init at91_add_device_rtt(void)
+ {
+ platform_device_register(&at91sam9g45_rtt_device);
+ }
+
+
+ /* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+ + + #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+ static struct platform_device at91sam9g45_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+ };
+
+ static void __init at91_add_device_watchdog(void)
+ {
+ platform_device_register(&at91sam9g45_wdt_device);
+ }
+ #else
+ static void __init at91_add_device_watchdog(void) {}
+ #endif
+
+
+ /* --------------------------------------------------------------------
+ * PWM
+ * --------------------------------------------------------------------*/
+
+ #if defined(CONFIG_ATMEL_PWM) || defined(CONFIG_ATMEL_PWM_MODULE)
+ static u32 pwm_mask;
+
+ static struct resource pwm_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_PWMC,
+ .end = AT91SAM9G45_BASE_PWMC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_PWMC,
+ .end = AT91SAM9G45_ID_PWMC,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct platform_device at91sam9g45_pwm0_device = {
+ .name = "atmel_pwm",
+ .id = -1,
+ .dev = {
+ .platform_data = &pwm_mask,
+ },
+ .resource = pwm_resources,
+ .num_resources = ARRAY_SIZE(pwm_resources),
+ };
+
+ void __init at91_add_device_pwm(u32 mask)
+ {
+ if (mask & (1 << AT91_PWM0))
+ at91_set_B_periph(AT91_PIN_PD24, 1); /* enable PWM0 */
+
+ if (mask & (1 << AT91_PWM1))
+ at91_set_B_periph(AT91_PIN_PD31, 1); /* enable PWM1 */
+
+ if (mask & (1 << AT91_PWM2))
+ at91_set_B_periph(AT91_PIN_PD26, 1); /* enable PWM2 */
+
+ if (mask & (1 << AT91_PWM3))
+ at91_set_B_periph(AT91_PIN_PD0, 1); /* enable PWM3 */
+
+ pwm_mask = mask;
+
+ platform_device_register(&at91sam9g45_pwm0_device);
+ }
+ #else
+ void __init at91_add_device_pwm(u32 mask) {}
+ #endif
+
+
+ /* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+ static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+ static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_SSC0,
+ .end = AT91SAM9G45_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_SSC0,
+ .end = AT91SAM9G45_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct platform_device at91sam9g45_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+ };
+
+ static inline void configure_ssc0_pins(unsigned pins)
+ {
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PD1, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PD0, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PD2, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PD3, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PD4, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PD5, 1);
+ }
+
+ static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+ static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_SSC1,
+ .end = AT91SAM9G45_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_SSC1,
+ .end = AT91SAM9G45_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct platform_device at91sam9g45_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+ };
+
+ static inline void configure_ssc1_pins(unsigned pins)
+ {
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PD14, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PD12, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PD10, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PD11, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PD13, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PD15, 1);
+ }
+
+ /*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+ void __init at91_add_device_ssc(unsigned id, unsigned pins)
+ {
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91SAM9G45_ID_SSC0:
+ pdev = &at91sam9g45_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
+ break;
+ case AT91SAM9G45_ID_SSC1:
+ pdev = &at91sam9g45_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
+ }
+
+ #else
+ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
+ #endif
+
+
+ /* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_SERIAL_ATMEL)
+ static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0,
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+ };
+
+ static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9g45_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+ };
+
+ static inline void configure_dbgu_pins(void)
+ {
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PB13, 1); /* DTXD */
+ }
+
+ static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_US0,
+ .end = AT91SAM9G45_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_US0,
+ .end = AT91SAM9G45_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
+
+ static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9g45_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+ };
+
+ static inline void configure_usart0_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PB19, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PB18, 0); /* RXD0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PB17, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PB15, 0); /* CTS0 */
+ }
+
+ static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_US1,
+ .end = AT91SAM9G45_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_US1,
+ .end = AT91SAM9G45_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
+
+ static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9g45_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+ };
+
+ static inline void configure_usart1_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PD16, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PD17, 0); /* CTS1 */
+ }
+
+ static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_US2,
+ .end = AT91SAM9G45_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_US2,
+ .end = AT91SAM9G45_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
+
+ static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9g45_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+ };
+
+ static inline void configure_usart2_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PC9, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PC11, 0); /* CTS2 */
+ }
+
+ static struct resource uart3_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_US3,
+ .end = AT91SAM9G45_BASE_US3 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_US3,
+ .end = AT91SAM9G45_ID_US3,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ static struct atmel_uart_data uart3_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
+
+ static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9g45_uart3_device = {
+ .name = "atmel_usart",
+ .id = 4,
+ .dev = {
+ .dma_mask = &uart3_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart3_data,
+ },
+ .resource = uart3_resources,
+ .num_resources = ARRAY_SIZE(uart3_resources),
+ };
+
+ static inline void configure_usart3_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD3 */
+ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD3 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PA23, 0); /* RTS3 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PA24, 0); /* CTS3 */
+ }
+
+ static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+ struct platform_device *atmel_default_console_device; /* the serial console device */
+
+ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+ {
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91sam9g45_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91SAM9G45_ID_US0:
+ pdev = &at91sam9g45_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9G45_ID_US1:
+ pdev = &at91sam9g45_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9G45_ID_US2:
+ pdev = &at91sam9g45_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9G45_ID_US3:
+ pdev = &at91sam9g45_uart3_device;
+ configure_usart3_pins(pins);
+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+ }
+
+ void __init at91_set_serial_console(unsigned portnr)
+ {
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ }
+
+ void __init at91_add_device_serial(void)
+ {
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+ }
+ #else
+ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+ void __init at91_set_serial_console(unsigned portnr) {}
+ void __init at91_add_device_serial(void) {}
+ #endif
+
+
+ /* -------------------------------------------------------------------- */
+ /*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+ static int __init at91_add_standard_devices(void)
+ {
+ at91_add_device_hdmac();
+ at91_add_device_rtc();
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
+ at91_add_device_tc();
+ return 0;
+ }
+
+ arch_initcall(at91_add_standard_devices);
git.openpandora.org / pandora-kernel.git / commitdiff