Merge branch 'fix/misc' into for-linus
authorTakashi Iwai <tiwai@suse.de>
Thu, 10 Nov 2011 18:52:08 +0000 (19:52 +0100)
committerTakashi Iwai <tiwai@suse.de>
Thu, 10 Nov 2011 18:52:08 +0000 (19:52 +0100)
MAINTAINERS
include/linux/mfd/wm8994/registers.h
sound/soc/codecs/wm8994.c

index 4808256..c802e5f 100644 (file)
@@ -6122,7 +6122,7 @@ F:        sound/
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
 M:     Liam Girdwood <lrg@ti.com>
 M:     Mark Brown <broonie@opensource.wolfsonmicro.com>
-T:     git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
+T:     git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:     alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:     http://alsa-project.org/main/index.php/ASoC
 S:     Supported
index fae2950..83a9cae 100644 (file)
 #define WM8958_MICB2_DISCH_SHIFT                     0  /* MICB2_DISCH */
 #define WM8958_MICB2_DISCH_WIDTH                     1  /* MICB2_DISCH */
 
+/*
+ * R210 (0xD2) - Mic Detect 3
+ */
+#define WM8958_MICD_LVL_MASK                    0x07FC  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_SHIFT                        2  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_WIDTH                        9  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_VALID                       0x0002  /* MICD_VALID */
+#define WM8958_MICD_VALID_MASK                  0x0002  /* MICD_VALID */
+#define WM8958_MICD_VALID_SHIFT                      1  /* MICD_VALID */
+#define WM8958_MICD_VALID_WIDTH                      1  /* MICD_VALID */
+#define WM8958_MICD_STS                         0x0001  /* MICD_STS */
+#define WM8958_MICD_STS_MASK                    0x0001  /* MICD_STS */
+#define WM8958_MICD_STS_SHIFT                        0  /* MICD_STS */
+#define WM8958_MICD_STS_WIDTH                        1  /* MICD_STS */
+
 /*
  * R76 (0x4C) - Charge Pump (1)
  */
index 6b73efd..9c982e4 100644 (file)
@@ -56,7 +56,7 @@ static int wm8994_retune_mobile_base[] = {
 static int wm8994_readable(struct snd_soc_codec *codec, unsigned int reg)
 {
        struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
-       struct wm8994 *control = wm8994->control_data;
+       struct wm8994 *control = codec->control_data;
 
        switch (reg) {
        case WM8994_GPIO_1:
@@ -3030,19 +3030,34 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data)
 {
        struct wm8994_priv *wm8994 = data;
        struct snd_soc_codec *codec = wm8994->codec;
-       int reg;
+       int reg, count;
 
-       reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
-       if (reg < 0) {
-               dev_err(codec->dev, "Failed to read mic detect status: %d\n",
-                       reg);
-               return IRQ_NONE;
-       }
+       /* We may occasionally read a detection without an impedence
+        * range being provided - if that happens loop again.
+        */
+       count = 10;
+       do {
+               reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
+               if (reg < 0) {
+                       dev_err(codec->dev,
+                               "Failed to read mic detect status: %d\n",
+                               reg);
+                       return IRQ_NONE;
+               }
 
-       if (!(reg & WM8958_MICD_VALID)) {
-               dev_dbg(codec->dev, "Mic detect data not valid\n");
-               goto out;
-       }
+               if (!(reg & WM8958_MICD_VALID)) {
+                       dev_dbg(codec->dev, "Mic detect data not valid\n");
+                       goto out;
+               }
+
+               if (!(reg & WM8958_MICD_STS) || (reg & WM8958_MICD_LVL_MASK))
+                       break;
+
+               msleep(1);
+       } while (count--);
+
+       if (count == 0)
+               dev_warn(codec->dev, "No impedence range reported for jack\n");
 
 #ifndef CONFIG_SND_SOC_WM8994_MODULE
        trace_snd_soc_jack_irq(dev_name(codec->dev));
@@ -3180,9 +3195,9 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
 
        wm8994_request_irq(codec->control_data, WM8994_IRQ_FIFOS_ERR,
                           wm8994_fifo_error, "FIFO error", codec);
-       wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_WARN,
+       wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_WARN,
                           wm8994_temp_warn, "Thermal warning", codec);
-       wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_SHUT,
+       wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_SHUT,
                           wm8994_temp_shut, "Thermal shutdown", codec);
 
        ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_DCS_DONE,