#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/mpspec.h>
+#include <asm/trampoline.h>
#define COMPILER_DEPENDENT_INT64 long long
#define COMPILER_DEPENDENT_UINT64 unsigned long long
extern int acpi_save_state_mem(void);
extern void acpi_restore_state_mem(void);
-extern unsigned long acpi_wakeup_address;
+extern const unsigned char acpi_wakeup_code[];
+#define acpi_wakeup_address (__pa(TRAMPOLINE_SYM(acpi_wakeup_code)))
/* early initialization routine */
extern void acpi_reserve_wakeup_memory(void);
#ifndef __ASSEMBLY__
-#ifdef CONFIG_X86_TRAMPOLINE
+#include <linux/types.h>
+#include <asm/io.h>
+
/*
- * Trampoline 80x86 program as an array.
+ * Trampoline 80x86 program as an array. These are in the init rodata
+ * segment, but that's okay, because we only care about the relative
+ * addresses of the symbols.
*/
-extern const unsigned char trampoline_data [];
-extern const unsigned char trampoline_end [];
-extern unsigned char *trampoline_base;
+extern const unsigned char x86_trampoline_start [];
+extern const unsigned char x86_trampoline_end [];
+extern unsigned char *x86_trampoline_base;
extern unsigned long init_rsp;
extern unsigned long initial_code;
extern unsigned long initial_gs;
-#define TRAMPOLINE_SIZE roundup(trampoline_end - trampoline_data, PAGE_SIZE)
+extern void __init setup_trampolines(void);
+
+extern const unsigned char trampoline_data[];
+extern const unsigned char trampoline_status[];
+
+#define TRAMPOLINE_SYM(x) \
+ ((void *)(x86_trampoline_base + \
+ ((const unsigned char *)(x) - x86_trampoline_start)))
-extern unsigned long setup_trampoline(void);
-extern void __init reserve_trampoline_memory(void);
-#else
-static inline void reserve_trampoline_memory(void) {}
-#endif /* CONFIG_X86_TRAMPOLINE */
+/* Address of the SMP trampoline */
+static inline unsigned long trampoline_address(void)
+{
+ return virt_to_phys(TRAMPOLINE_SYM(trampoline_data));
+}
#endif /* __ASSEMBLY__ */
#include <asm/page_types.h>
#include <asm/pgtable_types.h>
#include <asm/processor-flags.h>
+#include "wakeup.h"
.code16
- .section ".header", "a"
+ .section ".jump", "ax"
+ .globl _start
+_start:
+ cli
+ jmp wakeup_code
/* This should match the structure in wakeup.h */
+ .section ".header", "a"
.globl wakeup_header
wakeup_header:
video_mode: .short 0 /* Video mode number */
wakeup_jmp_off: .word 3f
wakeup_jmp_seg: .word 0
wakeup_gdt: .quad 0, 0, 0
-signature: .long 0x51ee1111
+signature: .long WAKEUP_HEADER_SIGNATURE
.text
- .globl _start
.code16
wakeup_code:
-_start:
- cli
cld
/* Apparently some dimwit BIOS programmers don't know how to
/* Check header signature... */
movl signature, %eax
- cmpl $0x51ee1111, %eax
+ cmpl $WAKEUP_HEADER_SIGNATURE, %eax
jne bogus_real_magic
/* Check we really have everything... */
movl end_signature, %eax
- cmpl $0x65a22c82, %eax
+ cmpl $WAKEUP_END_SIGNATURE, %eax
jne bogus_real_magic
/* Call the C code */
wakeup_stack:
.space 2048
wakeup_stack_end:
+
+ .section ".signature","a"
+end_signature:
+ .long WAKEUP_END_SIGNATURE
extern struct wakeup_header wakeup_header;
#endif
-#define HEADER_OFFSET 0x3f00
-#define WAKEUP_SIZE 0x4000
+#define WAKEUP_HEADER_OFFSET 8
+#define WAKEUP_HEADER_SIGNATURE 0x51ee1111
+#define WAKEUP_END_SIGNATURE 0x65a22c82
#endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */
SECTIONS
{
. = 0;
+ .jump : {
+ *(.jump)
+ } = 0x90909090
+
+ . = WAKEUP_HEADER_OFFSET;
+ .header : {
+ *(.header)
+ }
+
+ . = ALIGN(16);
.text : {
*(.text*)
- }
+ } = 0x90909090
. = ALIGN(16);
.rodata : {
*(.data*)
}
- .signature : {
- end_signature = .;
- LONG(0x65a22c82)
- }
-
. = ALIGN(16);
.bss : {
__bss_start = .;
__bss_end = .;
}
- . = HEADER_OFFSET;
- .header : {
- *(.header)
+ .signature : {
+ *(.signature)
}
- . = ALIGN(16);
_end = .;
/DISCARD/ : {
*(.note*)
}
-
- /*
- * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
- */
- . = ASSERT(_end <= WAKEUP_SIZE, "Wakeup too big!");
}
#include "realmode/wakeup.h"
#include "sleep.h"
-unsigned long acpi_wakeup_address;
unsigned long acpi_realmode_flags;
-/* address in low memory of the wakeup routine. */
-static unsigned long acpi_realmode;
-
#if defined(CONFIG_SMP) && defined(CONFIG_64BIT)
static char temp_stack[4096];
#endif
*
* Create an identity mapped page table and copy the wakeup routine to
* low memory.
- *
- * Note that this is too late to change acpi_wakeup_address.
*/
int acpi_save_state_mem(void)
{
struct wakeup_header *header;
+ /* address in low memory of the wakeup routine. */
+ char *acpi_realmode;
- if (!acpi_realmode) {
- printk(KERN_ERR "Could not allocate memory during boot, "
- "S3 disabled\n");
- return -ENOMEM;
- }
- memcpy((void *)acpi_realmode, &wakeup_code_start, WAKEUP_SIZE);
+ acpi_realmode = TRAMPOLINE_SYM(acpi_wakeup_code);
- header = (struct wakeup_header *)(acpi_realmode + HEADER_OFFSET);
- if (header->signature != 0x51ee1111) {
+ header = (struct wakeup_header *)(acpi_realmode + WAKEUP_HEADER_OFFSET);
+ if (header->signature != WAKEUP_HEADER_SIGNATURE) {
printk(KERN_ERR "wakeup header does not match\n");
return -EINVAL;
}
/* GDT[0]: GDT self-pointer */
header->wakeup_gdt[0] =
(u64)(sizeof(header->wakeup_gdt) - 1) +
- ((u64)(acpi_wakeup_address +
- ((char *)&header->wakeup_gdt - (char *)acpi_realmode))
- << 16);
+ ((u64)__pa(&header->wakeup_gdt) << 16);
/* GDT[1]: big real mode-like code segment */
header->wakeup_gdt[1] =
GDT_ENTRY(0x809b, acpi_wakeup_address, 0xfffff);
header->pmode_cr3 = (u32)__pa(&initial_page_table);
saved_magic = 0x12345678;
#else /* CONFIG_64BIT */
- header->trampoline_segment = setup_trampoline() >> 4;
+ header->trampoline_segment = trampoline_address() >> 4;
#ifdef CONFIG_SMP
stack_start = (unsigned long)temp_stack + sizeof(temp_stack);
early_gdt_descr.address =
{
}
-
-/**
- * acpi_reserve_wakeup_memory - do _very_ early ACPI initialisation
- *
- * We allocate a page from the first 1MB of memory for the wakeup
- * routine for when we come back from a sleep state. The
- * runtime allocator allows specification of <16MB pages, but not
- * <1MB pages.
- */
-void __init acpi_reserve_wakeup_memory(void)
-{
- phys_addr_t mem;
-
- if ((&wakeup_code_end - &wakeup_code_start) > WAKEUP_SIZE) {
- printk(KERN_ERR
- "ACPI: Wakeup code way too big, S3 disabled.\n");
- return;
- }
-
- mem = memblock_find_in_range(0, 1<<20, WAKEUP_SIZE, PAGE_SIZE);
-
- if (mem == MEMBLOCK_ERROR) {
- printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n");
- return;
- }
- acpi_realmode = (unsigned long) phys_to_virt(mem);
- acpi_wakeup_address = mem;
- memblock_x86_reserve_range(mem, mem + WAKEUP_SIZE, "ACPI WAKEUP");
-}
-
-int __init acpi_configure_wakeup_memory(void)
-{
- if (acpi_realmode)
- set_memory_x(acpi_realmode, WAKEUP_SIZE >> PAGE_SHIFT);
-
- return 0;
-}
-arch_initcall(acpi_configure_wakeup_memory);
-
-
static int __init acpi_sleep_setup(char *str)
{
while ((str != NULL) && (*str != '\0')) {
#include <asm/trampoline.h>
-extern char wakeup_code_start, wakeup_code_end;
-
extern unsigned long saved_video_mode;
extern long saved_magic;
extern int wakeup_pmode_return;
-extern char swsusp_pg_dir[PAGE_SIZE];
extern unsigned long acpi_copy_wakeup_routine(unsigned long);
extern void wakeup_long64(void);
* Wrapper script for the realmode binary as a transport object
* before copying to low memory.
*/
- .section ".rodata","a"
- .globl wakeup_code_start, wakeup_code_end
-wakeup_code_start:
+#include <asm/page_types.h>
+
+ .section ".x86_trampoline","a"
+ .balign PAGE_SIZE
+ .globl acpi_wakeup_code
+acpi_wakeup_code:
.incbin "arch/x86/kernel/acpi/realmode/wakeup.bin"
-wakeup_code_end:
.size wakeup_code_start, .-wakeup_code_start
setup_trampolines();
-#ifdef CONFIG_ACPI_SLEEP
- /*
- * Reserve low memory region for sleep support.
- * even before init_memory_mapping
- */
- acpi_reserve_wakeup_memory();
-#endif
init_gbpages();
/* max_pfn_mapped is updated here */
#include <linux/device.h>
#include <linux/suspend.h>
#include <linux/reboot.h>
+#include <linux/acpi.h>
#include <asm/io.h>
git.openpandora.org / pandora-kernel.git / commitdiff