[ARM] pxa/corgi: cleanup GPIO configurations and low power mode settings

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 788343d..f8e2959 100644 (file)
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -106,18 +106,18 @@ static unsigned long corgi_pin_config[] __initdata = {
        GPIO8_MMC_CS0,
 
        /* GPIO Matrix Keypad */
-       GPIO66_GPIO,    /* column 0 */
-       GPIO67_GPIO,    /* column 1 */
-       GPIO68_GPIO,    /* column 2 */
-       GPIO69_GPIO,    /* column 3 */
-       GPIO70_GPIO,    /* column 4 */
-       GPIO71_GPIO,    /* column 5 */
-       GPIO72_GPIO,    /* column 6 */
-       GPIO73_GPIO,    /* column 7 */
-       GPIO74_GPIO,    /* column 8 */
-       GPIO75_GPIO,    /* column 9 */
-       GPIO76_GPIO,    /* column 10 */
-       GPIO77_GPIO,    /* column 11 */
+       GPIO66_GPIO | MFP_LPM_DRIVE_HIGH,       /* column 0 */
+       GPIO67_GPIO | MFP_LPM_DRIVE_HIGH,       /* column 1 */
+       GPIO68_GPIO | MFP_LPM_DRIVE_HIGH,       /* column 2 */
+       GPIO69_GPIO | MFP_LPM_DRIVE_HIGH,       /* column 3 */
+       GPIO70_GPIO | MFP_LPM_DRIVE_HIGH,       /* column 4 */
+       GPIO71_GPIO | MFP_LPM_DRIVE_HIGH,       /* column 5 */
+       GPIO72_GPIO | MFP_LPM_DRIVE_HIGH,       /* column 6 */
+       GPIO73_GPIO | MFP_LPM_DRIVE_HIGH,       /* column 7 */
+       GPIO74_GPIO | MFP_LPM_DRIVE_HIGH,       /* column 8 */
+       GPIO75_GPIO | MFP_LPM_DRIVE_HIGH,       /* column 9 */
+       GPIO76_GPIO | MFP_LPM_DRIVE_HIGH,       /* column 10 */
+       GPIO77_GPIO | MFP_LPM_DRIVE_HIGH,       /* column 11 */
        GPIO58_GPIO,    /* row 0 */
        GPIO59_GPIO,    /* row 1 */
        GPIO60_GPIO,    /* row 2 */
@@ -128,17 +128,20 @@ static unsigned long corgi_pin_config[] __initdata = {
        GPIO65_GPIO,    /* row 7 */
 
        /* GPIO */
-       GPIO9_GPIO,     /* CORGI_GPIO_nSD_DETECT */
-       GPIO7_GPIO,     /* CORGI_GPIO_nSD_WP */
-       GPIO21_GPIO,    /* CORGI_GPIO_ADC_TEMP */
-       GPIO22_GPIO,    /* CORGI_GPIO_IR_ON */
-       GPIO33_GPIO,    /* CORGI_GPIO_SD_PWR */
-       GPIO38_GPIO,    /* CORGI_GPIO_CHRG_ON */
-       GPIO43_GPIO,    /* CORGI_GPIO_CHRG_UKN */
-       GPIO44_GPIO,    /* CORGI_GPIO_HSYNC */
+       GPIO9_GPIO,                             /* CORGI_GPIO_nSD_DETECT */
+       GPIO7_GPIO,                             /* CORGI_GPIO_nSD_WP */
+       GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,      /* CORGI_GPIO_MAIN_BAT_{LOW,COVER} */
+       GPIO13_GPIO | MFP_LPM_KEEP_OUTPUT,      /* CORGI_GPIO_LED_ORANGE */
+       GPIO21_GPIO,                            /* CORGI_GPIO_ADC_TEMP */
+       GPIO22_GPIO,                            /* CORGI_GPIO_IR_ON */
+       GPIO33_GPIO,                            /* CORGI_GPIO_SD_PWR */
+       GPIO38_GPIO | MFP_LPM_KEEP_OUTPUT,      /* CORGI_GPIO_CHRG_ON */
+       GPIO43_GPIO | MFP_LPM_KEEP_OUTPUT,      /* CORGI_GPIO_CHRG_UKN */
+       GPIO44_GPIO,                            /* CORGI_GPIO_HSYNC */
 
        GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,       /* CORGI_GPIO_KEY_INT */
        GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,       /* CORGI_GPIO_AC_IN */
+       GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,       /* CORGI_GPIO_WAKEUP */
 };
 
 /*
@@ -676,6 +679,15 @@ static void __init corgi_init(void)
 
        pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
 
+       /* allow wakeup from various GPIOs */
+       gpio_set_wake(CORGI_GPIO_KEY_INT, 1);
+       gpio_set_wake(CORGI_GPIO_WAKEUP, 1);
+       gpio_set_wake(CORGI_GPIO_AC_IN, 1);
+       gpio_set_wake(CORGI_GPIO_CHRG_FULL, 1);
+
+       if (!machine_is_corgi())
+               gpio_set_wake(CORGI_GPIO_MAIN_BAT_LOW, 1);
+
        pxa_set_ffuart_info(NULL);
        pxa_set_btuart_info(NULL);
        pxa_set_stuart_info(NULL);

diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index bb68347..3f1dc74 100644 (file)
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -77,45 +77,6 @@ static void corgi_discharge(int on)
 
 static void corgi_presuspend(void)
 {
-       int i;
-       unsigned long wakeup_mask;
-
-       /* charging , so CHARGE_ON bit is HIGH during OFF. */
-       if (READ_GPIO_BIT(CORGI_GPIO_CHRG_ON))
-               PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_ON);
-       else
-               PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_ON);
-
-       if (READ_GPIO_BIT(CORGI_GPIO_LED_ORANGE))
-               PGSR0 |= GPIO_bit(CORGI_GPIO_LED_ORANGE);
-       else
-               PGSR0 &= ~GPIO_bit(CORGI_GPIO_LED_ORANGE);
-
-       if (READ_GPIO_BIT(CORGI_GPIO_CHRG_UKN))
-               PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_UKN);
-       else
-               PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_UKN);
-
-       /* Resume on keyboard power key */
-       PGSR2 = (PGSR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(0);
-
-       wakeup_mask = GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) | GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_CHRG_FULL);
-
-       if (!machine_is_corgi())
-               wakeup_mask |= GPIO_bit(CORGI_GPIO_MAIN_BAT_LOW);
-
-       PWER = wakeup_mask | PWER_RTC;
-       PRER = wakeup_mask;
-       PFER = wakeup_mask;
-
-       for (i = 0; i <=15; i++) {
-               if (PRER & PFER & GPIO_bit(i)) {
-                       if (GPLR0 & GPIO_bit(i) )
-                               PRER &= ~GPIO_bit(i);
-                       else
-                               PFER &= ~GPIO_bit(i);
-               }
-       }
 }
 
 static void corgi_postsuspend(void)