1. General Information
=======================
-The CPUFreq core code is located in linux/kernel/cpufreq.c. This
+The CPUFreq core code is located in drivers/cpufreq/cpufreq.c. This
cpufreq code offers a standardized interface for the CPUFreq
architecture drivers (those pieces of code that do actual
frequency transitions), as well as to "notifiers". These are device
Who: Patrick McHardy <kaber@trash.net>
---------------------------
+
+What: ACPI hooks (X86_SPEEDSTEP_CENTRINO_ACPI) in speedstep-centrino driver
+When: December 2006
+Why: Speedstep-centrino driver with ACPI hooks and acpi-cpufreq driver are
+ functionally very much similar. They talk to ACPI in same way. Only
+ difference between them is the way they do frequency transitions.
+ One uses MSRs and the other one uses IO ports. Functionaliy of
+ speedstep_centrino with ACPI hooks is now merged into acpi-cpufreq.
+ That means one common driver will support all Intel Enhanced Speedstep
+ capable CPUs. That means less confusion over name of
+ speedstep-centrino driver (with that driver supposed to be used on
+ non-centrino platforms). That means less duplication of code and
+ less maintenance effort and no possibility of these two drivers
+ going out of sync.
+ Current users of speedstep_centrino with ACPI hooks are requested to
+ switch over to acpi-cpufreq driver. speedstep-centrino will continue
+ to work using older non-ACPI static table based scheme even after this
+ date.
+
+Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+
+---------------------------
config MODVERSIONS
bool "Set version information on all module symbols"
- depends MODULES
+ depends on MODULES
help
Usually, modules have to be recompiled whenever you switch to a new
kernel. ...
it can be specified explicitly:
menu "Network device support"
- depends NET
+ depends on NET
config NETDEVICES
...
config MODVERSIONS
bool "Set version information on all module symbols"
- depends MODULES
+ depends on MODULES
comment "module support disabled"
- depends !MODULES
+ depends on !MODULES
MODVERSIONS directly depends on MODULES, this means it's only visible if
MODULES is different from 'n'. The comment on the other hand is always
M: davej@codemonkey.org.uk
L: cpufreq@lists.linux.org.uk
W: http://www.codemonkey.org.uk/projects/cpufreq/
-T: git kernel.org/pub/scm/linux/kernel/davej/cpufreq.git
+T: git kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
S: Maintained
CPUID/MSR DRIVER
S: Maintained
INOTIFY
-P: John McCutchan and Robert Love
-M: ttb@tentacle.dhs.org and rml@novell.com
+P: John McCutchan
+M: ttb@tentacle.dhs.org
+P: Robert Love
+M: rml@novell.com
L: linux-kernel@vger.kernel.org
S: Maintained
help:
@echo 'Cleaning targets:'
- @echo ' clean - remove most generated files but keep the config and'
+ @echo ' clean - Remove most generated files but keep the config and'
@echo ' enough build support to build external modules'
- @echo ' mrproper - remove all generated files + config + various backup files'
+ @echo ' mrproper - Remove all generated files + config + various backup files'
@echo ' distclean - mrproper + remove editor backup and patch files'
@echo ''
@echo 'Configuration targets:'
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select SHARP_LOCOMO
select PXA_SSP
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_HUSKY
bool "Enable Sharp SL-C760 (Husky) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
select MACH_SPITZ
select I2C
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
config MACH_BORZOI
bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
config PXA25x
bool
config OMAP_SERIAL_WAKE
bool "Enable wake-up events for serial ports"
- depends OMAP_MUX
+ depends on OMAP_MUX
default y
help
Select this option if you want to have your system wake up
help
This driver adds a CPUFreq driver which utilizes the ACPI
Processor Performance States.
+ This driver also supports Intel Enhanced Speedstep.
For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
config X86_SPEEDSTEP_CENTRINO_ACPI
- bool "Use ACPI tables to decode valid frequency/voltage pairs"
+ bool "Use ACPI tables to decode valid frequency/voltage (deprecated)"
depends on X86_SPEEDSTEP_CENTRINO && ACPI_PROCESSOR
depends on !(X86_SPEEDSTEP_CENTRINO = y && ACPI_PROCESSOR = m)
default y
help
+ This is deprecated and this functionality is now merged into
+ acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
+ speedstep_centrino.
Use primarily the information provided in the BIOS ACPI tables
to determine valid CPU frequency and voltage pairings. It is
required for the driver to work on non-Banias CPUs.
obj-$(CONFIG_X86_LONGRUN) += longrun.o
obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o
obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o
-obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o
obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o
obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o
+obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
/*
- * acpi-cpufreq.c - ACPI Processor P-States Driver ($Revision: 1.3 $)
+ * acpi-cpufreq.c - ACPI Processor P-States Driver ($Revision: 1.4 $)
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
* Copyright (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de>
+ * Copyright (C) 2006 Denis Sadykov <denis.m.sadykov@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
#include <linux/cpufreq.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
#include <linux/compiler.h>
-#include <linux/sched.h> /* current */
#include <linux/dmi.h>
-#include <asm/io.h>
-#include <asm/delay.h>
-#include <asm/uaccess.h>
#include <linux/acpi.h>
#include <acpi/processor.h>
+#include <asm/io.h>
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/cpufeature.h>
+#include <asm/delay.h>
+#include <asm/uaccess.h>
+
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg)
MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski");
MODULE_DESCRIPTION("ACPI Processor P-States Driver");
MODULE_LICENSE("GPL");
+enum {
+ UNDEFINED_CAPABLE = 0,
+ SYSTEM_INTEL_MSR_CAPABLE,
+ SYSTEM_IO_CAPABLE,
+};
+
+#define INTEL_MSR_RANGE (0xffff)
+#define CPUID_6_ECX_APERFMPERF_CAPABILITY (0x1)
-struct cpufreq_acpi_io {
- struct acpi_processor_performance *acpi_data;
- struct cpufreq_frequency_table *freq_table;
- unsigned int resume;
+struct acpi_cpufreq_data {
+ struct acpi_processor_performance *acpi_data;
+ struct cpufreq_frequency_table *freq_table;
+ unsigned int max_freq;
+ unsigned int resume;
+ unsigned int cpu_feature;
};
-static struct cpufreq_acpi_io *acpi_io_data[NR_CPUS];
-static struct acpi_processor_performance *acpi_perf_data[NR_CPUS];
+static struct acpi_cpufreq_data *drv_data[NR_CPUS];
+static struct acpi_processor_performance *acpi_perf_data[NR_CPUS];
static struct cpufreq_driver acpi_cpufreq_driver;
static unsigned int acpi_pstate_strict;
-static int
-acpi_processor_write_port(
- u16 port,
- u8 bit_width,
- u32 value)
+static int check_est_cpu(unsigned int cpuid)
+{
+ struct cpuinfo_x86 *cpu = &cpu_data[cpuid];
+
+ if (cpu->x86_vendor != X86_VENDOR_INTEL ||
+ !cpu_has(cpu, X86_FEATURE_EST))
+ return 0;
+
+ return 1;
+}
+
+static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data)
+{
+ struct acpi_processor_performance *perf;
+ int i;
+
+ perf = data->acpi_data;
+
+ for (i=0; i<perf->state_count; i++) {
+ if (value == perf->states[i].status)
+ return data->freq_table[i].frequency;
+ }
+ return 0;
+}
+
+static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data)
{
- if (bit_width <= 8) {
+ int i;
+ struct acpi_processor_performance *perf;
+
+ msr &= INTEL_MSR_RANGE;
+ perf = data->acpi_data;
+
+ for (i=0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
+ if (msr == perf->states[data->freq_table[i].index].status)
+ return data->freq_table[i].frequency;
+ }
+ return data->freq_table[0].frequency;
+}
+
+static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data)
+{
+ switch (data->cpu_feature) {
+ case SYSTEM_INTEL_MSR_CAPABLE:
+ return extract_msr(val, data);
+ case SYSTEM_IO_CAPABLE:
+ return extract_io(val, data);
+ default:
+ return 0;
+ }
+}
+
+static void wrport(u16 port, u8 bit_width, u32 value)
+{
+ if (bit_width <= 8)
outb(value, port);
- } else if (bit_width <= 16) {
+ else if (bit_width <= 16)
outw(value, port);
- } else if (bit_width <= 32) {
+ else if (bit_width <= 32)
outl(value, port);
- } else {
- return -ENODEV;
- }
- return 0;
}
-static int
-acpi_processor_read_port(
- u16 port,
- u8 bit_width,
- u32 *ret)
+static void rdport(u16 port, u8 bit_width, u32 * ret)
{
*ret = 0;
- if (bit_width <= 8) {
+ if (bit_width <= 8)
*ret = inb(port);
- } else if (bit_width <= 16) {
+ else if (bit_width <= 16)
*ret = inw(port);
- } else if (bit_width <= 32) {
+ else if (bit_width <= 32)
*ret = inl(port);
- } else {
- return -ENODEV;
+}
+
+struct msr_addr {
+ u32 reg;
+};
+
+struct io_addr {
+ u16 port;
+ u8 bit_width;
+};
+
+typedef union {
+ struct msr_addr msr;
+ struct io_addr io;
+} drv_addr_union;
+
+struct drv_cmd {
+ unsigned int type;
+ cpumask_t mask;
+ drv_addr_union addr;
+ u32 val;
+};
+
+static void do_drv_read(struct drv_cmd *cmd)
+{
+ u32 h;
+
+ switch (cmd->type) {
+ case SYSTEM_INTEL_MSR_CAPABLE:
+ rdmsr(cmd->addr.msr.reg, cmd->val, h);
+ break;
+ case SYSTEM_IO_CAPABLE:
+ rdport(cmd->addr.io.port, cmd->addr.io.bit_width, &cmd->val);
+ break;
+ default:
+ break;
}
- return 0;
}
-static int
-acpi_processor_set_performance (
- struct cpufreq_acpi_io *data,
- unsigned int cpu,
- int state)
+static void do_drv_write(struct drv_cmd *cmd)
{
- u16 port = 0;
- u8 bit_width = 0;
- int i = 0;
- int ret = 0;
- u32 value = 0;
- int retval;
- struct acpi_processor_performance *perf;
-
- dprintk("acpi_processor_set_performance\n");
-
- retval = 0;
- perf = data->acpi_data;
- if (state == perf->state) {
- if (unlikely(data->resume)) {
- dprintk("Called after resume, resetting to P%d\n", state);
- data->resume = 0;
- } else {
- dprintk("Already at target state (P%d)\n", state);
- return (retval);
- }
+ u32 h = 0;
+
+ switch (cmd->type) {
+ case SYSTEM_INTEL_MSR_CAPABLE:
+ wrmsr(cmd->addr.msr.reg, cmd->val, h);
+ break;
+ case SYSTEM_IO_CAPABLE:
+ wrport(cmd->addr.io.port, cmd->addr.io.bit_width, cmd->val);
+ break;
+ default:
+ break;
}
+}
- dprintk("Transitioning from P%d to P%d\n", perf->state, state);
+static void drv_read(struct drv_cmd *cmd)
+{
+ cpumask_t saved_mask = current->cpus_allowed;
+ cmd->val = 0;
- /*
- * First we write the target state's 'control' value to the
- * control_register.
- */
+ set_cpus_allowed(current, cmd->mask);
+ do_drv_read(cmd);
+ set_cpus_allowed(current, saved_mask);
+}
+
+static void drv_write(struct drv_cmd *cmd)
+{
+ cpumask_t saved_mask = current->cpus_allowed;
+ unsigned int i;
+
+ for_each_cpu_mask(i, cmd->mask) {
+ set_cpus_allowed(current, cpumask_of_cpu(i));
+ do_drv_write(cmd);
+ }
+
+ set_cpus_allowed(current, saved_mask);
+ return;
+}
+
+static u32 get_cur_val(cpumask_t mask)
+{
+ struct acpi_processor_performance *perf;
+ struct drv_cmd cmd;
+
+ if (unlikely(cpus_empty(mask)))
+ return 0;
+
+ switch (drv_data[first_cpu(mask)]->cpu_feature) {
+ case SYSTEM_INTEL_MSR_CAPABLE:
+ cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
+ cmd.addr.msr.reg = MSR_IA32_PERF_STATUS;
+ break;
+ case SYSTEM_IO_CAPABLE:
+ cmd.type = SYSTEM_IO_CAPABLE;
+ perf = drv_data[first_cpu(mask)]->acpi_data;
+ cmd.addr.io.port = perf->control_register.address;
+ cmd.addr.io.bit_width = perf->control_register.bit_width;
+ break;
+ default:
+ return 0;
+ }
+
+ cmd.mask = mask;
- port = perf->control_register.address;
- bit_width = perf->control_register.bit_width;
- value = (u32) perf->states[state].control;
+ drv_read(&cmd);
- dprintk("Writing 0x%08x to port 0x%04x\n", value, port);
+ dprintk("get_cur_val = %u\n", cmd.val);
- ret = acpi_processor_write_port(port, bit_width, value);
- if (ret) {
- dprintk("Invalid port width 0x%04x\n", bit_width);
- return (ret);
+ return cmd.val;
+}
+
+/*
+ * Return the measured active (C0) frequency on this CPU since last call
+ * to this function.
+ * Input: cpu number
+ * Return: Average CPU frequency in terms of max frequency (zero on error)
+ *
+ * We use IA32_MPERF and IA32_APERF MSRs to get the measured performance
+ * over a period of time, while CPU is in C0 state.
+ * IA32_MPERF counts at the rate of max advertised frequency
+ * IA32_APERF counts at the rate of actual CPU frequency
+ * Only IA32_APERF/IA32_MPERF ratio is architecturally defined and
+ * no meaning should be associated with absolute values of these MSRs.
+ */
+static unsigned int get_measured_perf(unsigned int cpu)
+{
+ union {
+ struct {
+ u32 lo;
+ u32 hi;
+ } split;
+ u64 whole;
+ } aperf_cur, mperf_cur;
+
+ cpumask_t saved_mask;
+ unsigned int perf_percent;
+ unsigned int retval;
+
+ saved_mask = current->cpus_allowed;
+ set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ if (get_cpu() != cpu) {
+ /* We were not able to run on requested processor */
+ put_cpu();
+ return 0;
}
+ rdmsr(MSR_IA32_APERF, aperf_cur.split.lo, aperf_cur.split.hi);
+ rdmsr(MSR_IA32_MPERF, mperf_cur.split.lo, mperf_cur.split.hi);
+
+ wrmsr(MSR_IA32_APERF, 0,0);
+ wrmsr(MSR_IA32_MPERF, 0,0);
+
+#ifdef __i386__
/*
- * Assume the write went through when acpi_pstate_strict is not used.
- * As read status_register is an expensive operation and there
- * are no specific error cases where an IO port write will fail.
+ * We dont want to do 64 bit divide with 32 bit kernel
+ * Get an approximate value. Return failure in case we cannot get
+ * an approximate value.
*/
- if (acpi_pstate_strict) {
- /* Then we read the 'status_register' and compare the value
- * with the target state's 'status' to make sure the
- * transition was successful.
- * Note that we'll poll for up to 1ms (100 cycles of 10us)
- * before giving up.
- */
-
- port = perf->status_register.address;
- bit_width = perf->status_register.bit_width;
-
- dprintk("Looking for 0x%08x from port 0x%04x\n",
- (u32) perf->states[state].status, port);
-
- for (i = 0; i < 100; i++) {
- ret = acpi_processor_read_port(port, bit_width, &value);
- if (ret) {
- dprintk("Invalid port width 0x%04x\n", bit_width);
- return (ret);
- }
- if (value == (u32) perf->states[state].status)
- break;
- udelay(10);
- }
- } else {
- value = (u32) perf->states[state].status;
+ if (unlikely(aperf_cur.split.hi || mperf_cur.split.hi)) {
+ int shift_count;
+ u32 h;
+
+ h = max_t(u32, aperf_cur.split.hi, mperf_cur.split.hi);
+ shift_count = fls(h);
+
+ aperf_cur.whole >>= shift_count;
+ mperf_cur.whole >>= shift_count;
+ }
+
+ if (((unsigned long)(-1) / 100) < aperf_cur.split.lo) {
+ int shift_count = 7;
+ aperf_cur.split.lo >>= shift_count;
+ mperf_cur.split.lo >>= shift_count;
+ }
+
+ if (aperf_cur.split.lo && mperf_cur.split.lo)
+ perf_percent = (aperf_cur.split.lo * 100) / mperf_cur.split.lo;
+ else
+ perf_percent = 0;
+
+#else
+ if (unlikely(((unsigned long)(-1) / 100) < aperf_cur.whole)) {
+ int shift_count = 7;
+ aperf_cur.whole >>= shift_count;
+ mperf_cur.whole >>= shift_count;
}
- if (unlikely(value != (u32) perf->states[state].status)) {
- printk(KERN_WARNING "acpi-cpufreq: Transition failed\n");
- retval = -ENODEV;
- return (retval);
+ if (aperf_cur.whole && mperf_cur.whole)
+ perf_percent = (aperf_cur.whole * 100) / mperf_cur.whole;
+ else
+ perf_percent = 0;
+
+#endif
+
+ retval = drv_data[cpu]->max_freq * perf_percent / 100;
+
+ put_cpu();
+ set_cpus_allowed(current, saved_mask);
+
+ dprintk("cpu %d: performance percent %d\n", cpu, perf_percent);
+ return retval;
+}
+
+static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
+{
+ struct acpi_cpufreq_data *data = drv_data[cpu];
+ unsigned int freq;
+
+ dprintk("get_cur_freq_on_cpu (%d)\n", cpu);
+
+ if (unlikely(data == NULL ||
+ data->acpi_data == NULL || data->freq_table == NULL)) {
+ return 0;
}
- dprintk("Transition successful after %d microseconds\n", i * 10);
+ freq = extract_freq(get_cur_val(cpumask_of_cpu(cpu)), data);
+ dprintk("cur freq = %u\n", freq);
- perf->state = state;
- return (retval);
+ return freq;
}
+static unsigned int check_freqs(cpumask_t mask, unsigned int freq,
+ struct acpi_cpufreq_data *data)
+{
+ unsigned int cur_freq;
+ unsigned int i;
+
+ for (i=0; i<100; i++) {
+ cur_freq = extract_freq(get_cur_val(mask), data);
+ if (cur_freq == freq)
+ return 1;
+ udelay(10);
+ }
+ return 0;
+}
-static int
-acpi_cpufreq_target (
- struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
+static int acpi_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
{
- struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+ struct acpi_cpufreq_data *data = drv_data[policy->cpu];
struct acpi_processor_performance *perf;
struct cpufreq_freqs freqs;
cpumask_t online_policy_cpus;
- cpumask_t saved_mask;
- cpumask_t set_mask;
- cpumask_t covered_cpus;
- unsigned int cur_state = 0;
+ struct drv_cmd cmd;
+ unsigned int msr;
unsigned int next_state = 0;
- unsigned int result = 0;
- unsigned int j;
- unsigned int tmp;
+ unsigned int next_perf_state = 0;
+ unsigned int i;
+ int result = 0;
- dprintk("acpi_cpufreq_setpolicy\n");
+ dprintk("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu);
- result = cpufreq_frequency_table_target(policy,
- data->freq_table,
- target_freq,
- relation,
- &next_state);
- if (unlikely(result))
- return (result);
+ if (unlikely(data == NULL ||
+ data->acpi_data == NULL || data->freq_table == NULL)) {
+ return -ENODEV;
+ }
perf = data->acpi_data;
- cur_state = perf->state;
- freqs.old = data->freq_table[cur_state].frequency;
- freqs.new = data->freq_table[next_state].frequency;
+ result = cpufreq_frequency_table_target(policy,
+ data->freq_table,
+ target_freq,
+ relation, &next_state);
+ if (unlikely(result))
+ return -ENODEV;
#ifdef CONFIG_HOTPLUG_CPU
/* cpufreq holds the hotplug lock, so we are safe from here on */
online_policy_cpus = policy->cpus;
#endif
- for_each_cpu_mask(j, online_policy_cpus) {
- freqs.cpu = j;
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ next_perf_state = data->freq_table[next_state].index;
+ if (perf->state == next_perf_state) {
+ if (unlikely(data->resume)) {
+ dprintk("Called after resume, resetting to P%d\n",
+ next_perf_state);
+ data->resume = 0;
+ } else {
+ dprintk("Already at target state (P%d)\n",
+ next_perf_state);
+ return 0;
+ }
}
- /*
- * We need to call driver->target() on all or any CPU in
- * policy->cpus, depending on policy->shared_type.
- */
- saved_mask = current->cpus_allowed;
- cpus_clear(covered_cpus);
- for_each_cpu_mask(j, online_policy_cpus) {
- /*
- * Support for SMP systems.
- * Make sure we are running on CPU that wants to change freq
- */
- cpus_clear(set_mask);
- if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
- cpus_or(set_mask, set_mask, online_policy_cpus);
- else
- cpu_set(j, set_mask);
-
- set_cpus_allowed(current, set_mask);
- if (unlikely(!cpu_isset(smp_processor_id(), set_mask))) {
- dprintk("couldn't limit to CPUs in this domain\n");
- result = -EAGAIN;
- break;
- }
+ switch (data->cpu_feature) {
+ case SYSTEM_INTEL_MSR_CAPABLE:
+ cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
+ cmd.addr.msr.reg = MSR_IA32_PERF_CTL;
+ msr =
+ (u32) perf->states[next_perf_state].
+ control & INTEL_MSR_RANGE;
+ cmd.val = (cmd.val & ~INTEL_MSR_RANGE) | msr;
+ break;
+ case SYSTEM_IO_CAPABLE:
+ cmd.type = SYSTEM_IO_CAPABLE;
+ cmd.addr.io.port = perf->control_register.address;
+ cmd.addr.io.bit_width = perf->control_register.bit_width;
+ cmd.val = (u32) perf->states[next_perf_state].control;
+ break;
+ default:
+ return -ENODEV;
+ }
- result = acpi_processor_set_performance (data, j, next_state);
- if (result) {
- result = -EAGAIN;
- break;
- }
+ cpus_clear(cmd.mask);
- if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
- break;
-
- cpu_set(j, covered_cpus);
- }
+ if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY)
+ cmd.mask = online_policy_cpus;
+ else
+ cpu_set(policy->cpu, cmd.mask);
- for_each_cpu_mask(j, online_policy_cpus) {
- freqs.cpu = j;
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ freqs.old = data->freq_table[perf->state].frequency;
+ freqs.new = data->freq_table[next_perf_state].frequency;
+ for_each_cpu_mask(i, cmd.mask) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
}
- if (unlikely(result)) {
- /*
- * We have failed halfway through the frequency change.
- * We have sent callbacks to online_policy_cpus and
- * acpi_processor_set_performance() has been called on
- * coverd_cpus. Best effort undo..
- */
-
- if (!cpus_empty(covered_cpus)) {
- for_each_cpu_mask(j, covered_cpus) {
- policy->cpu = j;
- acpi_processor_set_performance (data,
- j,
- cur_state);
- }
- }
+ drv_write(&cmd);
- tmp = freqs.new;
- freqs.new = freqs.old;
- freqs.old = tmp;
- for_each_cpu_mask(j, online_policy_cpus) {
- freqs.cpu = j;
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ if (acpi_pstate_strict) {
+ if (!check_freqs(cmd.mask, freqs.new, data)) {
+ dprintk("acpi_cpufreq_target failed (%d)\n",
+ policy->cpu);
+ return -EAGAIN;
}
}
- set_cpus_allowed(current, saved_mask);
- return (result);
-}
+ for_each_cpu_mask(i, cmd.mask) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ }
+ perf->state = next_perf_state;
+ return result;
+}
-static int
-acpi_cpufreq_verify (
- struct cpufreq_policy *policy)
+static int acpi_cpufreq_verify(struct cpufreq_policy *policy)
{
- unsigned int result = 0;
- struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+ struct acpi_cpufreq_data *data = drv_data[policy->cpu];
dprintk("acpi_cpufreq_verify\n");
- result = cpufreq_frequency_table_verify(policy,
- data->freq_table);
-
- return (result);
+ return cpufreq_frequency_table_verify(policy, data->freq_table);
}
-
static unsigned long
-acpi_cpufreq_guess_freq (
- struct cpufreq_acpi_io *data,
- unsigned int cpu)
+acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu)
{
- struct acpi_processor_performance *perf = data->acpi_data;
+ struct acpi_processor_performance *perf = data->acpi_data;
if (cpu_khz) {
/* search the closest match to cpu_khz */
unsigned long freq;
unsigned long freqn = perf->states[0].core_frequency * 1000;
- for (i = 0; i < (perf->state_count - 1); i++) {
+ for (i=0; i<(perf->state_count-1); i++) {
freq = freqn;
freqn = perf->states[i+1].core_frequency * 1000;
if ((2 * cpu_khz) > (freqn + freq)) {
perf->state = i;
- return (freq);
+ return freq;
}
}
- perf->state = perf->state_count - 1;
- return (freqn);
+ perf->state = perf->state_count-1;
+ return freqn;
} else {
/* assume CPU is at P0... */
perf->state = 0;
}
}
-
/*
* acpi_cpufreq_early_init - initialize ACPI P-States library
*
* do _PDC and _PSD and find out the processor dependency for the
* actual init that will happen later...
*/
-static int acpi_cpufreq_early_init_acpi(void)
+static int acpi_cpufreq_early_init(void)
{
- struct acpi_processor_performance *data;
- unsigned int i, j;
+ struct acpi_processor_performance *data;
+ cpumask_t covered;
+ unsigned int i, j;
dprintk("acpi_cpufreq_early_init\n");
for_each_possible_cpu(i) {
- data = kzalloc(sizeof(struct acpi_processor_performance),
- GFP_KERNEL);
+ data = kzalloc(sizeof(struct acpi_processor_performance),
+ GFP_KERNEL);
if (!data) {
- for_each_possible_cpu(j) {
+ for_each_cpu_mask(j, covered) {
kfree(acpi_perf_data[j]);
acpi_perf_data[j] = NULL;
}
- return (-ENOMEM);
+ return -ENOMEM;
}
acpi_perf_data[i] = data;
+ cpu_set(i, covered);
}
/* Do initialization in ACPI core */
- return acpi_processor_preregister_performance(acpi_perf_data);
+ acpi_processor_preregister_performance(acpi_perf_data);
+ return 0;
}
+#ifdef CONFIG_SMP
/*
* Some BIOSes do SW_ANY coordination internally, either set it up in hw
* or do it in BIOS firmware and won't inform about it to OS. If not
},
{ }
};
+#endif
-static int
-acpi_cpufreq_cpu_init (
- struct cpufreq_policy *policy)
+static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
- unsigned int i;
- unsigned int cpu = policy->cpu;
- struct cpufreq_acpi_io *data;
- unsigned int result = 0;
+ unsigned int i;
+ unsigned int valid_states = 0;
+ unsigned int cpu = policy->cpu;
+ struct acpi_cpufreq_data *data;
+ unsigned int result = 0;
struct cpuinfo_x86 *c = &cpu_data[policy->cpu];
- struct acpi_processor_performance *perf;
+ struct acpi_processor_performance *perf;
dprintk("acpi_cpufreq_cpu_init\n");
if (!acpi_perf_data[cpu])
- return (-ENODEV);
+ return -ENODEV;
- data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
+ data = kzalloc(sizeof(struct acpi_cpufreq_data), GFP_KERNEL);
if (!data)
- return (-ENOMEM);
+ return -ENOMEM;
data->acpi_data = acpi_perf_data[cpu];
- acpi_io_data[cpu] = data;
+ drv_data[cpu] = data;
- result = acpi_processor_register_performance(data->acpi_data, cpu);
+ if (cpu_has(c, X86_FEATURE_CONSTANT_TSC))
+ acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS;
+ result = acpi_processor_register_performance(data->acpi_data, cpu);
if (result)
goto err_free;
perf = data->acpi_data;
policy->shared_type = perf->shared_type;
+
/*
- * Will let policy->cpus know about dependency only when software
+ * Will let policy->cpus know about dependency only when software
* coordination is required.
*/
if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL ||
}
#endif
- if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
- acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS;
- }
-
/* capability check */
if (perf->state_count <= 1) {
dprintk("No P-States\n");
goto err_unreg;
}
- if ((perf->control_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO) ||
- (perf->status_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
- dprintk("Unsupported address space [%d, %d]\n",
- (u32) (perf->control_register.space_id),
- (u32) (perf->status_register.space_id));
+ if (perf->control_register.space_id != perf->status_register.space_id) {
+ result = -ENODEV;
+ goto err_unreg;
+ }
+
+ switch (perf->control_register.space_id) {
+ case ACPI_ADR_SPACE_SYSTEM_IO:
+ dprintk("SYSTEM IO addr space\n");
+ data->cpu_feature = SYSTEM_IO_CAPABLE;
+ break;
+ case ACPI_ADR_SPACE_FIXED_HARDWARE:
+ dprintk("HARDWARE addr space\n");
+ if (!check_est_cpu(cpu)) {
+ result = -ENODEV;
+ goto err_unreg;
+ }
+ data->cpu_feature = SYSTEM_INTEL_MSR_CAPABLE;
+ break;
+ default:
+ dprintk("Unknown addr space %d\n",
+ (u32) (perf->control_register.space_id));
result = -ENODEV;
goto err_unreg;
}
- /* alloc freq_table */
- data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) * (perf->state_count + 1), GFP_KERNEL);
+ data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) *
+ (perf->state_count+1), GFP_KERNEL);
if (!data->freq_table) {
result = -ENOMEM;
goto err_unreg;
/* detect transition latency */
policy->cpuinfo.transition_latency = 0;
for (i=0; i<perf->state_count; i++) {
- if ((perf->states[i].transition_latency * 1000) > policy->cpuinfo.transition_latency)
- policy->cpuinfo.transition_latency = perf->states[i].transition_latency * 1000;
+ if ((perf->states[i].transition_latency * 1000) >
+ policy->cpuinfo.transition_latency)
+ policy->cpuinfo.transition_latency =
+ perf->states[i].transition_latency * 1000;
}
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
- /* The current speed is unknown and not detectable by ACPI... */
- policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu);
-
+ data->max_freq = perf->states[0].core_frequency * 1000;
/* table init */
- for (i=0; i<=perf->state_count; i++)
- {
- data->freq_table[i].index = i;
- if (i<perf->state_count)
- data->freq_table[i].frequency = perf->states[i].core_frequency * 1000;
- else
- data->freq_table[i].frequency = CPUFREQ_TABLE_END;
+ for (i=0; i<perf->state_count; i++) {
+ if (i>0 && perf->states[i].core_frequency ==
+ perf->states[i-1].core_frequency)
+ continue;
+
+ data->freq_table[valid_states].index = i;
+ data->freq_table[valid_states].frequency =
+ perf->states[i].core_frequency * 1000;
+ valid_states++;
}
+ data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table);
- if (result) {
+ if (result)
goto err_freqfree;
+
+ switch (data->cpu_feature) {
+ case ACPI_ADR_SPACE_SYSTEM_IO:
+ /* Current speed is unknown and not detectable by IO port */
+ policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu);
+ break;
+ case ACPI_ADR_SPACE_FIXED_HARDWARE:
+ acpi_cpufreq_driver.get = get_cur_freq_on_cpu;
+ get_cur_freq_on_cpu(cpu);
+ break;
+ default:
+ break;
}
/* notify BIOS that we exist */
acpi_processor_notify_smm(THIS_MODULE);
- printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management activated.\n",
- cpu);
+ /* Check for APERF/MPERF support in hardware */
+ if (c->x86_vendor == X86_VENDOR_INTEL && c->cpuid_level >= 6) {
+ unsigned int ecx;
+ ecx = cpuid_ecx(6);
+ if (ecx & CPUID_6_ECX_APERFMPERF_CAPABILITY)
+ acpi_cpufreq_driver.getavg = get_measured_perf;
+ }
+
+ dprintk("CPU%u - ACPI performance management activated.\n", cpu);
for (i = 0; i < perf->state_count; i++)
dprintk(" %cP%d: %d MHz, %d mW, %d uS\n",
- (i == perf->state?'*':' '), i,
+ (i == perf->state ? '*' : ' '), i,
(u32) perf->states[i].core_frequency,
(u32) perf->states[i].power,
(u32) perf->states[i].transition_latency);
cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu);
-
+
/*
* the first call to ->target() should result in us actually
* writing something to the appropriate registers.
*/
data->resume = 1;
-
- return (result);
- err_freqfree:
+ return result;
+
+err_freqfree:
kfree(data->freq_table);
- err_unreg:
+err_unreg:
acpi_processor_unregister_performance(perf, cpu);
- err_free:
+err_free:
kfree(data);
- acpi_io_data[cpu] = NULL;
+ drv_data[cpu] = NULL;
- return (result);
+ return result;
}
-
-static int
-acpi_cpufreq_cpu_exit (
- struct cpufreq_policy *policy)
+static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy)
{
- struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
-
+ struct acpi_cpufreq_data *data = drv_data[policy->cpu];
dprintk("acpi_cpufreq_cpu_exit\n");
if (data) {
cpufreq_frequency_table_put_attr(policy->cpu);
- acpi_io_data[policy->cpu] = NULL;
- acpi_processor_unregister_performance(data->acpi_data, policy->cpu);
+ drv_data[policy->cpu] = NULL;
+ acpi_processor_unregister_performance(data->acpi_data,
+ policy->cpu);
kfree(data);
}
- return (0);
+ return 0;
}
-static int
-acpi_cpufreq_resume (
- struct cpufreq_policy *policy)
+static int acpi_cpufreq_resume(struct cpufreq_policy *policy)
{
- struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
-
+ struct acpi_cpufreq_data *data = drv_data[policy->cpu];
dprintk("acpi_cpufreq_resume\n");
data->resume = 1;
- return (0);
+ return 0;
}
-
-static struct freq_attr* acpi_cpufreq_attr[] = {
+static struct freq_attr *acpi_cpufreq_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
static struct cpufreq_driver acpi_cpufreq_driver = {
- .verify = acpi_cpufreq_verify,
- .target = acpi_cpufreq_target,
- .init = acpi_cpufreq_cpu_init,
- .exit = acpi_cpufreq_cpu_exit,
- .resume = acpi_cpufreq_resume,
- .name = "acpi-cpufreq",
- .owner = THIS_MODULE,
- .attr = acpi_cpufreq_attr,
+ .verify = acpi_cpufreq_verify,
+ .target = acpi_cpufreq_target,
+ .init = acpi_cpufreq_cpu_init,
+ .exit = acpi_cpufreq_cpu_exit,
+ .resume = acpi_cpufreq_resume,
+ .name = "acpi-cpufreq",
+ .owner = THIS_MODULE,
+ .attr = acpi_cpufreq_attr,
};
-
-static int __init
-acpi_cpufreq_init (void)
+static int __init acpi_cpufreq_init(void)
{
dprintk("acpi_cpufreq_init\n");
- acpi_cpufreq_early_init_acpi();
+ acpi_cpufreq_early_init();
return cpufreq_register_driver(&acpi_cpufreq_driver);
}
-
-static void __exit
-acpi_cpufreq_exit (void)
+static void __exit acpi_cpufreq_exit(void)
{
- unsigned int i;
+ unsigned int i;
dprintk("acpi_cpufreq_exit\n");
cpufreq_unregister_driver(&acpi_cpufreq_driver);
}
module_param(acpi_pstate_strict, uint, 0644);
-MODULE_PARM_DESC(acpi_pstate_strict, "value 0 or non-zero. non-zero -> strict ACPI checks are performed during frequency changes.");
+MODULE_PARM_DESC(acpi_pstate_strict,
+ "value 0 or non-zero. non-zero -> strict ACPI checks are "
+ "performed during frequency changes.");
late_initcall(acpi_cpufreq_init);
module_exit(acpi_cpufreq_exit);
int ret;
struct gxfreq_params *params;
struct pci_dev *gx_pci;
- u32 class_rev;
/* Test if we have the right hardware */
if ((gx_pci = gx_detect_chipset()) == NULL)
pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration));
- pci_read_config_dword(params->cs55x0, PCI_CLASS_REVISION, &class_rev);
- params->pci_rev = class_rev && 0xff;
+ pci_read_config_byte(params->cs55x0, PCI_REVISION_ID, ¶ms->pci_rev);
if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) {
kfree(params);
maxmult=longhaul_get_cpu_mult();
/* Starting with the 1.2GHz parts, theres a 200MHz bus. */
- if ((cpu_khz/1000) > 1200)
+ if ((cpu_khz/maxmult) > 13400)
fsb = 200;
else
fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB];
if (dev == NULL) {
reg = 0x76;
dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_862X_0, NULL);
+ /* Find CN400 V-Link host bridge */
+ if (dev == NULL)
+ dev = pci_find_device(PCI_VENDOR_ID_VIA, 0x7259, NULL);
+
}
if (dev != NULL) {
/* Enable access to port 0x22 */
return 0;
err_acpi:
- printk(KERN_ERR PFX "No ACPI support. No VT8601 or VT8623 northbridge. Aborting.\n");
+ printk(KERN_ERR PFX "No ACPI support. Unsupported northbridge. Aborting.\n");
return -ENODEV;
}
static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
{
- if ((c->x86 == 0x06) && (c->x86_model == 0x09)) {
- /* Pentium M (Banias) */
- printk(KERN_WARNING PFX "Warning: Pentium M detected. "
- "The speedstep_centrino module offers voltage scaling"
- " in addition of frequency scaling. You should use "
- "that instead of p4-clockmod, if possible.\n");
- return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
- }
-
- if ((c->x86 == 0x06) && (c->x86_model == 0x0D)) {
- /* Pentium M (Dothan) */
- printk(KERN_WARNING PFX "Warning: Pentium M detected. "
- "The speedstep_centrino module offers voltage scaling"
- " in addition of frequency scaling. You should use "
- "that instead of p4-clockmod, if possible.\n");
- /* on P-4s, the TSC runs with constant frequency independent whether
- * throttling is active or not. */
- p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
- return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+ if (c->x86 == 0x06) {
+ if (cpu_has(c, X86_FEATURE_EST))
+ printk(KERN_WARNING PFX "Warning: EST-capable CPU detected. "
+ "The acpi-cpufreq module offers voltage scaling"
+ " in addition of frequency scaling. You should use "
+ "that instead of p4-clockmod, if possible.\n");
+ switch (c->x86_model) {
+ case 0x0E: /* Core */
+ case 0x0F: /* Core Duo */
+ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+ return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PCORE);
+ case 0x0D: /* Pentium M (Dothan) */
+ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+ /* fall through */
+ case 0x09: /* Pentium M (Banias) */
+ return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+ }
}
if (c->x86 != 0xF) {
- printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <linux@brodo.de>\n");
+ printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@lists.linux.org.uk>\n");
return 0;
}
static int __init sc520_freq_init(void)
{
struct cpuinfo_x86 *c = cpu_data;
+ int err;
/* Test if we have the right hardware */
if(c->x86_vendor != X86_VENDOR_AMD ||
return -ENOMEM;
}
- return cpufreq_register_driver(&sc520_freq_driver);
+ err = cpufreq_register_driver(&sc520_freq_driver);
+ if (err)
+ iounmap(cpuctl);
+
+ return err;
}
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
+#define INTEL_MSR_RANGE (0xffff)
struct cpu_id
{
}
+#ifdef CONFIG_SMP
/*
* Some BIOSes do SW_ANY coordination internally, either set it up in hw
* or do it in BIOS firmware and won't inform about it to OS. If not
return 0;
}
-
static struct dmi_system_id sw_any_bug_dmi_table[] = {
{
.callback = sw_any_bug_found,
},
{ }
};
-
+#endif
/*
* centrino_cpu_init_acpi - register with ACPI P-States library
}
for (i=0; i<p->state_count; i++) {
- if (p->states[i].control != p->states[i].status) {
- dprintk("Different control (%llu) and status values (%llu)\n",
+ if ((p->states[i].control & INTEL_MSR_RANGE) !=
+ (p->states[i].status & INTEL_MSR_RANGE)) {
+ dprintk("Different MSR bits in control (%llu) and status (%llu)\n",
p->states[i].control, p->states[i].status);
result = -EINVAL;
goto err_unreg;
}
for (i=0; i<p->state_count; i++) {
- centrino_model[cpu]->op_points[i].index = p->states[i].control;
+ centrino_model[cpu]->op_points[i].index = p->states[i].control & INTEL_MSR_RANGE;
centrino_model[cpu]->op_points[i].frequency = p->states[i].core_frequency * 1000;
dprintk("adding state %i with frequency %u and control value %04x\n",
i, centrino_model[cpu]->op_points[i].frequency, centrino_model[cpu]->op_points[i].index);
/* notify BIOS that we exist */
acpi_processor_notify_smm(THIS_MODULE);
+ printk("speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI"
+ "config is deprecated.\n "
+ "Use X86_ACPI_CPUFREQ (acpi-cpufreq instead.\n" );
return 0;
return (msr_tmp * 100 * 1000);
}
+static unsigned int pentium_core_get_frequency(void)
+{
+ u32 fsb = 0;
+ u32 msr_lo, msr_tmp;
+
+ rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp);
+ /* see table B-2 of 25366920.pdf */
+ switch (msr_lo & 0x07) {
+ case 5:
+ fsb = 100000;
+ break;
+ case 1:
+ fsb = 133333;
+ break;
+ case 3:
+ fsb = 166667;
+ break;
+ default:
+ printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value");
+ }
+
+ rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
+ dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+
+ msr_tmp = (msr_lo >> 22) & 0x1f;
+ dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * fsb));
+
+ return (msr_tmp * fsb);
+}
+
static unsigned int pentium4_get_frequency(void)
{
unsigned int speedstep_get_processor_frequency(unsigned int processor)
{
switch (processor) {
+ case SPEEDSTEP_PROCESSOR_PCORE:
+ return pentium_core_get_frequency();
case SPEEDSTEP_PROCESSOR_PM:
return pentiumM_get_frequency();
case SPEEDSTEP_PROCESSOR_P4D:
* the speedstep_get_processor_frequency() call. */
#define SPEEDSTEP_PROCESSOR_PM 0xFFFFFF03 /* Pentium M */
#define SPEEDSTEP_PROCESSOR_P4D 0xFFFFFF04 /* desktop P4 */
+#define SPEEDSTEP_PROCESSOR_PCORE 0xFFFFFF05 /* Core */
/* speedstep states -- only two of them */
case SPEEDSTEP_PROCESSOR_PIII_C:
case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
break;
- case SPEEDSTEP_PROCESSOR_P4M:
- printk(KERN_INFO "speedstep-smi: you're trying to use this cpufreq driver on a Pentium 4-based CPU. Most likely it will not work.\n");
- break;
default:
speedstep_processor = 0;
}
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
config 403GCX
bool
- depends OAK
+ depends on OAK
default y
config 405EP
Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES
- depends HDPU
+ depends on HDPU
tristate "HDPU-Features"
help
Select to enable HDPU enhanced features.
Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES
- depends HDPU
+ depends on HDPU
tristate "HDPU-Features"
help
Select to enable HDPU enhanced features.
config LITE5200B
bool "Freescale LITE5200B"
- depends LITE5200
+ depends on LITE5200
help
Support for the LITE5200B dev board for the MPC5200 from Freescale.
This is the new board with 2 PCI slots.
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
config 403GCX
bool
- depends OAK
+ depends on OAK
default y
config 405EP
size = transport->private_size + sizeof(struct uml_net_private) +
sizeof(((struct uml_net_private *) 0)->user);
- device = kmalloc(sizeof(*device), GFP_KERNEL);
+ device = kzalloc(sizeof(*device), GFP_KERNEL);
if (device == NULL) {
printk(KERN_ERR "eth_configure failed to allocate uml_net\n");
return(1);
}
- memset(device, 0, sizeof(*device));
INIT_LIST_HEAD(&device->list);
device->index = n;
# currently support
config V850E_MA1
bool
- depends RTE_CB_MA1
+ depends on RTE_CB_MA1
default y
# Similarly for the RTE-V850E/NB85E-CB - V850E/TEG
config V850E_TEG
bool
- depends RTE_CB_NB85E
+ depends on RTE_CB_NB85E
default y
# ... and the RTE-V850E/ME2-CB - V850E/ME2
config V850E_ME2
bool
- depends RTE_CB_ME2
+ depends on RTE_CB_ME2
default y
config V850E2_SIM85E2
bool
- depends V850E2_SIM85E2C || V850E2_SIM85E2S
+ depends on V850E2_SIM85E2C || V850E2_SIM85E2S
default y
# V850E2 processors
config V850E2
bool
- depends V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
+ depends on V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
default y
# Boards in the RTE-x-CB series
config RTE_CB
bool
- depends RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
+ depends on RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
default y
config RTE_CB_MULTI
# RTE_CB_NB85E can either have multi ROM support or not, but
# other platforms (currently only RTE_CB_MA1) require it.
prompt "Multi monitor ROM support" if RTE_CB_NB85E
- depends RTE_CB_MA1 || RTE_CB_NB85E
+ depends on RTE_CB_MA1 || RTE_CB_NB85E
default y
config RTE_CB_MULTI_DBTRAP
bool "Pass illegal insn trap / dbtrap to kernel"
- depends RTE_CB_MULTI
+ depends on RTE_CB_MULTI
default n
config RTE_CB_MA1_KSRAM
bool "Kernel in SRAM (limits size of kernel)"
- depends RTE_CB_MA1 && RTE_CB_MULTI
+ depends on RTE_CB_MA1 && RTE_CB_MULTI
default n
config RTE_MB_A_PCI
bool "Mother-A PCI support"
- depends RTE_CB
+ depends on RTE_CB
default y
# The GBUS is used to talk to the RTE-MOTHER-A board
config RTE_GBUS_INT
bool
- depends RTE_MB_A_PCI
+ depends on RTE_MB_A_PCI
default y
# The only PCI bus we support is on the RTE-MOTHER-A board
config ROM_KERNEL
bool "Kernel in ROM"
- depends V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
+ depends on V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
# Some platforms pre-zero memory, in which case the kernel doesn't need to
config ZERO_BSS
config V850E_HIGHRES_TIMER
bool "High resolution timer support"
- depends V850E_TIMER_D
+ depends on V850E_TIMER_D
config TIME_BOOTUP
bool "Time bootup"
- depends V850E_HIGHRES_TIMER
+ depends on V850E_HIGHRES_TIMER
config RESET_GUARD
bool "Reset Guard"
default y
config X86_SPEEDSTEP_CENTRINO
- tristate "Intel Enhanced SpeedStep"
+ tristate "Intel Enhanced SpeedStep (deprecated)"
select CPU_FREQ_TABLE
depends on ACPI_PROCESSOR
help
+ This is deprecated and this functionality is now merged into
+ acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
+ speedstep_centrino.
This adds the CPUFreq driver for Enhanced SpeedStep enabled
mobile CPUs. This means Intel Pentium M (Centrino) CPUs
or 64bit enabled Intel Xeons.
help
This driver adds a CPUFreq driver which utilizes the ACPI
Processor Performance States.
+ This driver also supports Intel Enhanced Speedstep.
For details, take a look at <file:Documentation/cpu-freq/>.
SRCDIR := ../../../i386/kernel/cpu/cpufreq
obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o
-obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o
+obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o
config TANBAC_TB0219
tristate "TANBAC TB0219 base board support"
- depends TANBAC_TB022X
+ depends on TANBAC_TB022X
select GPIO_VR41XX
source "drivers/char/agp/Kconfig"
{
int res;
- if (at91wdt_miscdev.dev)
+ if (at91wdt_miscdev.parent)
return -EBUSY;
- at91wdt_miscdev.dev = &pdev->dev;
+ at91wdt_miscdev.parent = &pdev->dev;
res = misc_register(&at91wdt_miscdev);
if (res)
res = misc_deregister(&at91wdt_miscdev);
if (!res)
- at91wdt_miscdev.dev = NULL;
+ at91wdt_miscdev.parent = NULL;
return res;
}
goto err_free;
}
- mpcore_wdt_miscdev.dev = &dev->dev;
+ mpcore_wdt_miscdev.parent = &dev->dev;
ret = misc_register(&mpcore_wdt_miscdev);
if (ret) {
dev_printk(KERN_ERR, _dev, "cannot register miscdev on minor=%d (err=%d)\n",
omap_wdt_disable();
omap_wdt_adjust_timeout(timer_margin);
- omap_wdt_miscdev.dev = &pdev->dev;
+ omap_wdt_miscdev.parent = &pdev->dev;
ret = misc_register(&omap_wdt_miscdev);
if (ret)
goto fail;
#include <asm/uaccess.h>
#include <linux/usb.h>
#include <linux/mutex.h>
+#include <linux/hid.h> /* For HID_REQ_SET_REPORT & HID_DT_REPORT */
#ifdef CONFIG_USB_DEBUG
#define CMD_ENABLE_WATCHDOG 0x30 /* Enable / Disable Watchdog */
#define CMD_DISABLE_WATCHDOG CMD_ENABLE_WATCHDOG
-/* Some defines that I like to be somewhere else like include/linux/usb_hid.h */
-#define HID_REQ_SET_REPORT 0x09
-#define HID_DT_REPORT (USB_TYPE_CLASS | 0x02)
-
/* We can only use 1 card due to the /dev/watchdog restriction */
static int cards_found;
/* Function prototypes */
-static irqreturn_t wdt_gpi_irqhdl(int, void *, struct pt_regs *);
+static irqreturn_t wdt_gpi_irqhdl(int, void *);
static void wdt_gpi_start(void);
static void wdt_gpi_stop(void);
static void wdt_gpi_set_timeout(unsigned int);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be disabled once started");
+/* Kernel interfaces */
+static struct file_operations fops = {
+ .owner = THIS_MODULE,
+ .open = wdt_gpi_open,
+ .release = wdt_gpi_release,
+ .write = wdt_gpi_write,
+ .unlocked_ioctl = wdt_gpi_ioctl,
+};
+
+static struct miscdevice miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = wdt_gpi_name,
+ .fops = &fops,
+};
+
+static struct notifier_block wdt_gpi_shutdown = {
+ .notifier_call = wdt_gpi_notify,
+};
+
+
/* Interrupt handler */
-static irqreturn_t wdt_gpi_irqhdl(int irq, void *ctxt, struct pt_regs *regs)
+static irqreturn_t wdt_gpi_irqhdl(int irq, void *ctxt)
{
if (!unlikely(__raw_readl(wd_regs + 0x0008) & 0x1))
return IRQ_NONE;
}
-/* Kernel interfaces */
-static struct file_operations fops = {
- .owner = THIS_MODULE,
- .open = wdt_gpi_open,
- .release = wdt_gpi_release,
- .write = wdt_gpi_write,
- .unlocked_ioctl = wdt_gpi_ioctl,
-};
-
-static struct miscdevice miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = wdt_gpi_name,
- .fops = &fops,
-};
-
-static struct notifier_block wdt_gpi_shutdown = {
- .notifier_call = wdt_gpi_notify,
-};
-
-
/* Init & exit procedures */
static const struct resource *
wdt_gpi_get_resource(struct platform_device *pdv, const char *name,
#include <linux/completion.h>
#include <linux/mutex.h>
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, "cpufreq-core", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, \
+ "cpufreq-core", msg)
/**
* The "cpufreq driver" - the arch- or hardware-dependent low
spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
}
-void cpufreq_debug_printk(unsigned int type, const char *prefix, const char *fmt, ...)
+void cpufreq_debug_printk(unsigned int type, const char *prefix,
+ const char *fmt, ...)
{
char s[256];
va_list args;
WARN_ON(!prefix);
if (type & debug) {
spin_lock_irqsave(&disable_ratelimit_lock, flags);
- if (!disable_ratelimit && debug_ratelimit && !printk_ratelimit()) {
+ if (!disable_ratelimit && debug_ratelimit
+ && !printk_ratelimit()) {
spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
return;
}
module_param(debug, uint, 0644);
-MODULE_PARM_DESC(debug, "CPUfreq debugging: add 1 to debug core, 2 to debug drivers, and 4 to debug governors.");
+MODULE_PARM_DESC(debug, "CPUfreq debugging: add 1 to debug core,"
+ " 2 to debug drivers, and 4 to debug governors.");
module_param(debug_ratelimit, uint, 0644);
-MODULE_PARM_DESC(debug_ratelimit, "CPUfreq debugging: set to 0 to disable ratelimiting.");
+MODULE_PARM_DESC(debug_ratelimit, "CPUfreq debugging:"
+ " set to 0 to disable ratelimiting.");
#else /* !CONFIG_CPU_FREQ_DEBUG */
if (!l_p_j_ref_freq) {
l_p_j_ref = loops_per_jiffy;
l_p_j_ref_freq = ci->old;
- dprintk("saving %lu as reference value for loops_per_jiffy; freq is %u kHz\n", l_p_j_ref, l_p_j_ref_freq);
+ dprintk("saving %lu as reference value for loops_per_jiffy;"
+ "freq is %u kHz\n", l_p_j_ref, l_p_j_ref_freq);
}
if ((val == CPUFREQ_PRECHANGE && ci->old < ci->new) ||
(val == CPUFREQ_POSTCHANGE && ci->old > ci->new) ||
(val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) {
- loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq, ci->new);
- dprintk("scaling loops_per_jiffy to %lu for frequency %u kHz\n", loops_per_jiffy, ci->new);
+ loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq,
+ ci->new);
+ dprintk("scaling loops_per_jiffy to %lu"
+ "for frequency %u kHz\n", loops_per_jiffy, ci->new);
}
}
#else
-static inline void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) { return; }
+static inline void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
+{
+ return;
+}
#endif
if (!strnicmp(str_governor, "performance", CPUFREQ_NAME_LEN)) {
*policy = CPUFREQ_POLICY_PERFORMANCE;
err = 0;
- } else if (!strnicmp(str_governor, "powersave", CPUFREQ_NAME_LEN)) {
+ } else if (!strnicmp(str_governor, "powersave",
+ CPUFREQ_NAME_LEN)) {
*policy = CPUFREQ_POLICY_POWERSAVE;
err = 0;
}
t = __find_governor(str_governor);
if (t == NULL) {
- char *name = kasprintf(GFP_KERNEL, "cpufreq_%s", str_governor);
+ char *name = kasprintf(GFP_KERNEL, "cpufreq_%s",
+ str_governor);
if (name) {
int ret;
/**
- * cpufreq_per_cpu_attr_read() / show_##file_name() - print out cpufreq information
+ * cpufreq_per_cpu_attr_read() / show_##file_name() -
+ * print out cpufreq information
*
* Write out information from cpufreq_driver->policy[cpu]; object must be
* "unsigned int".
show_one(scaling_max_freq, max);
show_one(scaling_cur_freq, cur);
-static int __cpufreq_set_policy(struct cpufreq_policy *data, struct cpufreq_policy *policy);
+static int __cpufreq_set_policy(struct cpufreq_policy *data,
+ struct cpufreq_policy *policy);
/**
* cpufreq_per_cpu_attr_write() / store_##file_name() - sysfs write access
/**
* show_cpuinfo_cur_freq - current CPU frequency as detected by hardware
*/
-static ssize_t show_cpuinfo_cur_freq (struct cpufreq_policy * policy, char *buf)
+static ssize_t show_cpuinfo_cur_freq (struct cpufreq_policy * policy,
+ char *buf)
{
unsigned int cur_freq = cpufreq_get(policy->cpu);
if (!cur_freq)
/**
* show_scaling_governor - show the current policy for the specified CPU
*/
-static ssize_t show_scaling_governor (struct cpufreq_policy * policy, char *buf)
+static ssize_t show_scaling_governor (struct cpufreq_policy * policy,
+ char *buf)
{
if(policy->policy == CPUFREQ_POLICY_POWERSAVE)
return sprintf(buf, "powersave\n");
if (ret != 1)
return -EINVAL;
- if (cpufreq_parse_governor(str_governor, &new_policy.policy, &new_policy.governor))
+ if (cpufreq_parse_governor(str_governor, &new_policy.policy,
+ &new_policy.governor))
return -EINVAL;
lock_cpu_hotplug();
unlock_cpu_hotplug();
- return ret ? ret : count;
+ if (ret)
+ return ret;
+ else
+ return count;
}
/**
/**
* show_scaling_available_governors - show the available CPUfreq governors
*/
-static ssize_t show_scaling_available_governors (struct cpufreq_policy * policy,
+static ssize_t show_scaling_available_governors (struct cpufreq_policy *policy,
char *buf)
{
ssize_t i = 0;
policy = cpufreq_cpu_get(policy->cpu);
if (!policy)
return -EINVAL;
- ret = fattr->show ? fattr->show(policy,buf) : -EIO;
+ if (fattr->show)
+ ret = fattr->show(policy, buf);
+ else
+ ret = -EIO;
+
cpufreq_cpu_put(policy);
return ret;
}
policy = cpufreq_cpu_get(policy->cpu);
if (!policy)
return -EINVAL;
- ret = fattr->store ? fattr->store(policy,buf,count) : -EIO;
+ if (fattr->store)
+ ret = fattr->store(policy, buf, count);
+ else
+ ret = -EIO;
+
cpufreq_cpu_put(policy);
return ret;
}
* We adjust to current frequency first, and need to clean up later. So either call
* to cpufreq_update_policy() or schedule handle_update()).
*/
-static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, unsigned int new_freq)
+static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq,
+ unsigned int new_freq)
{
struct cpufreq_freqs freqs;
unsigned int cpufreq_quick_get(unsigned int cpu)
{
struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
- unsigned int ret = 0;
+ unsigned int ret_freq = 0;
if (policy) {
mutex_lock(&policy->lock);
- ret = policy->cur;
+ ret_freq = policy->cur;
mutex_unlock(&policy->lock);
cpufreq_cpu_put(policy);
}
- return (ret);
+ return (ret_freq);
}
EXPORT_SYMBOL(cpufreq_quick_get);
unsigned int cpufreq_get(unsigned int cpu)
{
struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
- unsigned int ret = 0;
+ unsigned int ret_freq = 0;
if (!policy)
return 0;
mutex_lock(&policy->lock);
- ret = cpufreq_driver->get(cpu);
+ ret_freq = cpufreq_driver->get(cpu);
- if (ret && policy->cur && !(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
- /* verify no discrepancy between actual and saved value exists */
- if (unlikely(ret != policy->cur)) {
- cpufreq_out_of_sync(cpu, policy->cur, ret);
+ if (ret_freq && policy->cur &&
+ !(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
+ /* verify no discrepancy between actual and
+ saved value exists */
+ if (unlikely(ret_freq != policy->cur)) {
+ cpufreq_out_of_sync(cpu, policy->cur, ret_freq);
schedule_work(&policy->update);
}
}
out:
cpufreq_cpu_put(policy);
- return (ret);
+ return (ret_freq);
}
EXPORT_SYMBOL(cpufreq_get);
static int cpufreq_suspend(struct sys_device * sysdev, pm_message_t pmsg)
{
int cpu = sysdev->id;
- unsigned int ret = 0;
+ int ret = 0;
unsigned int cur_freq = 0;
struct cpufreq_policy *cpu_policy;
static int cpufreq_resume(struct sys_device * sysdev)
{
int cpu = sysdev->id;
- unsigned int ret = 0;
+ int ret = 0;
struct cpufreq_policy *cpu_policy;
dprintk("resuming cpu %u\n", cpu);
}
EXPORT_SYMBOL_GPL(cpufreq_driver_target);
+int cpufreq_driver_getavg(struct cpufreq_policy *policy)
+{
+ int ret = 0;
+
+ policy = cpufreq_cpu_get(policy->cpu);
+ if (!policy)
+ return -EINVAL;
+
+ mutex_lock(&policy->lock);
+
+ if (cpu_online(policy->cpu) && cpufreq_driver->getavg)
+ ret = cpufreq_driver->getavg(policy->cpu);
+
+ mutex_unlock(&policy->lock);
+
+ cpufreq_cpu_put(policy);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpufreq_driver_getavg);
+
/*
* Locking: Must be called with the lock_cpu_hotplug() lock held
* when "event" is CPUFREQ_GOV_LIMITS
*/
-static int __cpufreq_governor(struct cpufreq_policy *policy, unsigned int event)
+static int __cpufreq_governor(struct cpufreq_policy *policy,
+ unsigned int event)
{
int ret;
if (!try_module_get(policy->governor->owner))
return -EINVAL;
- dprintk("__cpufreq_governor for CPU %u, event %u\n", policy->cpu, event);
+ dprintk("__cpufreq_governor for CPU %u, event %u\n",
+ policy->cpu, event);
ret = policy->governor->governor(policy, event);
- /* we keep one module reference alive for each CPU governed by this CPU */
+ /* we keep one module reference alive for
+ each CPU governed by this CPU */
if ((event != CPUFREQ_GOV_START) || ret)
module_put(policy->governor->owner);
if ((event == CPUFREQ_GOV_STOP) && !ret)
/*
+ * data : current policy.
+ * policy : policy to be set.
* Locking: Must be called with the lock_cpu_hotplug() lock held
*/
-static int __cpufreq_set_policy(struct cpufreq_policy *data, struct cpufreq_policy *policy)
+static int __cpufreq_set_policy(struct cpufreq_policy *data,
+ struct cpufreq_policy *policy)
{
int ret = 0;
dprintk("setting new policy for CPU %u: %u - %u kHz\n", policy->cpu,
policy->min, policy->max);
- memcpy(&policy->cpuinfo, &data->cpuinfo, sizeof(struct cpufreq_cpuinfo));
+ memcpy(&policy->cpuinfo, &data->cpuinfo,
+ sizeof(struct cpufreq_cpuinfo));
if (policy->min > data->min && policy->min > policy->max) {
ret = -EINVAL;
data->min = policy->min;
data->max = policy->max;
- dprintk("new min and max freqs are %u - %u kHz\n", data->min, data->max);
+ dprintk("new min and max freqs are %u - %u kHz\n",
+ data->min, data->max);
if (cpufreq_driver->setpolicy) {
data->policy = policy->policy;
data->governor = policy->governor;
if (__cpufreq_governor(data, CPUFREQ_GOV_START)) {
/* new governor failed, so re-start old one */
- dprintk("starting governor %s failed\n", data->governor->name);
+ dprintk("starting governor %s failed\n",
+ data->governor->name);
if (old_gov) {
data->governor = old_gov;
- __cpufreq_governor(data, CPUFREQ_GOV_START);
+ __cpufreq_governor(data,
+ CPUFREQ_GOV_START);
}
ret = -EINVAL;
goto error_out;
data->cur = policy.cur;
} else {
if (data->cur != policy.cur)
- cpufreq_out_of_sync(cpu, data->cur, policy.cur);
+ cpufreq_out_of_sync(cpu, data->cur,
+ policy.cur);
}
}
/* if all ->init() calls failed, unregister */
if (ret) {
- dprintk("no CPU initialized for driver %s\n", driver_data->name);
- sysdev_driver_unregister(&cpu_sysdev_class, &cpufreq_sysdev_driver);
+ dprintk("no CPU initialized for driver %s\n",
+ driver_data->name);
+ sysdev_driver_unregister(&cpu_sysdev_class,
+ &cpufreq_sysdev_driver);
spin_lock_irqsave(&cpufreq_driver_lock, flags);
cpufreq_driver = NULL;
* latency of the processor. The governor will work on any processor with
* transition latency <= 10mS, using appropriate sampling
* rate.
- * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
- * this governor will not work.
+ * For CPUs with transition latency > 10mS (mostly drivers
+ * with CPUFREQ_ETERNAL), this governor will not work.
* All times here are in uS.
*/
static unsigned int def_sampling_rate;
#define MIN_SAMPLING_RATE_RATIO (2)
/* for correct statistics, we need at least 10 ticks between each measure */
-#define MIN_STAT_SAMPLING_RATE (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10))
-#define MIN_SAMPLING_RATE (def_sampling_rate / MIN_SAMPLING_RATE_RATIO)
+#define MIN_STAT_SAMPLING_RATE \
+ (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10))
+#define MIN_SAMPLING_RATE \
+ (def_sampling_rate / MIN_SAMPLING_RATE_RATIO)
#define MAX_SAMPLING_RATE (500 * def_sampling_rate)
#define DEF_SAMPLING_RATE_LATENCY_MULTIPLIER (1000)
#define DEF_SAMPLING_DOWN_FACTOR (1)
static inline unsigned int get_cpu_idle_time(unsigned int cpu)
{
- return kstat_cpu(cpu).cpustat.idle +
+ unsigned int add_nice = 0, ret;
+
+ if (dbs_tuners_ins.ignore_nice)
+ add_nice = kstat_cpu(cpu).cpustat.nice;
+
+ ret = kstat_cpu(cpu).cpustat.idle +
kstat_cpu(cpu).cpustat.iowait +
- ( dbs_tuners_ins.ignore_nice ?
- kstat_cpu(cpu).cpustat.nice :
- 0);
+ add_nice;
+
+ return ret;
}
/************************** sysfs interface ************************/
unsigned int cpu = policy->cpu;
struct cpu_dbs_info_s *this_dbs_info;
unsigned int j;
+ int rc;
this_dbs_info = &per_cpu(cpu_dbs_info, cpu);
break;
mutex_lock(&dbs_mutex);
+
+ rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
+ if (rc) {
+ mutex_unlock(&dbs_mutex);
+ return rc;
+ }
+
for_each_cpu_mask(j, policy->cpus) {
struct cpu_dbs_info_s *j_dbs_info;
j_dbs_info = &per_cpu(cpu_dbs_info, j);
this_dbs_info->enable = 1;
this_dbs_info->down_skip = 0;
this_dbs_info->requested_freq = policy->cur;
- sysfs_create_group(&policy->kobj, &dbs_attr_group);
+
dbs_enable++;
/*
* Start the timerschedule work, when this governor
static unsigned int def_sampling_rate;
#define MIN_SAMPLING_RATE_RATIO (2)
/* for correct statistics, we need at least 10 ticks between each measure */
-#define MIN_STAT_SAMPLING_RATE (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10))
-#define MIN_SAMPLING_RATE (def_sampling_rate / MIN_SAMPLING_RATE_RATIO)
+#define MIN_STAT_SAMPLING_RATE \
+ (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10))
+#define MIN_SAMPLING_RATE \
+ (def_sampling_rate / MIN_SAMPLING_RATE_RATIO)
#define MAX_SAMPLING_RATE (500 * def_sampling_rate)
#define DEF_SAMPLING_RATE_LATENCY_MULTIPLIER (1000)
#define TRANSITION_LATENCY_LIMIT (10 * 1000)
ret = sscanf(buf, "%u", &input);
mutex_lock(&dbs_mutex);
- if (ret != 1 || input > MAX_SAMPLING_RATE || input < MIN_SAMPLING_RATE) {
+ if (ret != 1 || input > MAX_SAMPLING_RATE
+ || input < MIN_SAMPLING_RATE) {
mutex_unlock(&dbs_mutex);
return -EINVAL;
}
* policy. To be safe, we focus 10 points under the threshold.
*/
if (load < (dbs_tuners_ins.up_threshold - 10)) {
- unsigned int freq_next = (policy->cur * load) /
+ unsigned int freq_next, freq_cur;
+
+ freq_cur = cpufreq_driver_getavg(policy);
+ if (!freq_cur)
+ freq_cur = policy->cur;
+
+ freq_next = (freq_cur * load) /
(dbs_tuners_ins.up_threshold - 10);
+
if (!dbs_tuners_ins.powersave_bias) {
__cpufreq_driver_target(policy, freq_next,
CPUFREQ_RELATION_L);
unsigned int cpu = policy->cpu;
struct cpu_dbs_info_s *this_dbs_info;
unsigned int j;
+ int rc;
this_dbs_info = &per_cpu(cpu_dbs_info, cpu);
if (dbs_enable == 1) {
kondemand_wq = create_workqueue("kondemand");
if (!kondemand_wq) {
- printk(KERN_ERR "Creation of kondemand failed\n");
+ printk(KERN_ERR
+ "Creation of kondemand failed\n");
dbs_enable--;
mutex_unlock(&dbs_mutex);
return -ENOSPC;
}
}
+
+ rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
+ if (rc) {
+ if (dbs_enable == 1)
+ destroy_workqueue(kondemand_wq);
+ dbs_enable--;
+ mutex_unlock(&dbs_mutex);
+ return rc;
+ }
+
for_each_cpu_mask(j, policy->cpus) {
struct cpu_dbs_info_s *j_dbs_info;
j_dbs_info = &per_cpu(cpu_dbs_info, j);
j_dbs_info->prev_cpu_wall = get_jiffies_64();
}
this_dbs_info->enable = 1;
- sysfs_create_group(&policy->kobj, &dbs_attr_group);
/*
* Start the timerschedule work, when this governor
* is used for first time
#include <linux/cpufreq.h>
#include <linux/init.h>
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "performance", msg)
+#define dprintk(msg...) \
+ cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "performance", msg)
static int cpufreq_governor_performance(struct cpufreq_policy *policy,
switch (event) {
case CPUFREQ_GOV_START:
case CPUFREQ_GOV_LIMITS:
- dprintk("setting to %u kHz because of event %u\n", policy->max, event);
- __cpufreq_driver_target(policy, policy->max, CPUFREQ_RELATION_H);
+ dprintk("setting to %u kHz because of event %u\n",
+ policy->max, event);
+ __cpufreq_driver_target(policy, policy->max,
+ CPUFREQ_RELATION_H);
break;
default:
break;
#include <linux/cpufreq.h>
#include <linux/init.h>
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "powersave", msg)
+#define dprintk(msg...) \
+ cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "powersave", msg)
static int cpufreq_governor_powersave(struct cpufreq_policy *policy,
unsigned int event)
switch (event) {
case CPUFREQ_GOV_START:
case CPUFREQ_GOV_LIMITS:
- dprintk("setting to %u kHz because of event %u\n", policy->min, event);
- __cpufreq_driver_target(policy, policy->min, CPUFREQ_RELATION_L);
+ dprintk("setting to %u kHz because of event %u\n",
+ policy->min, event);
+ __cpufreq_driver_target(policy, policy->min,
+ CPUFREQ_RELATION_L);
break;
default:
break;
register_hotcpu_notifier(&cpufreq_stat_cpu_notifier);
for_each_online_cpu(cpu) {
- cpufreq_stat_cpu_callback(&cpufreq_stat_cpu_notifier, CPU_ONLINE,
- (void *)(long)cpu);
+ cpufreq_stat_cpu_callback(&cpufreq_stat_cpu_notifier,
+ CPU_ONLINE, (void *)(long)cpu);
}
return 0;
}
unregister_hotcpu_notifier(&cpufreq_stat_cpu_notifier);
lock_cpu_hotplug();
for_each_online_cpu(cpu) {
- cpufreq_stat_cpu_callback(&cpufreq_stat_cpu_notifier, CPU_DEAD,
- (void *)(long)cpu);
+ cpufreq_stat_cpu_callback(&cpufreq_stat_cpu_notifier,
+ CPU_DEAD, (void *)(long)cpu);
}
unlock_cpu_hotplug();
}
MODULE_AUTHOR ("Zou Nan hai <nanhai.zou@intel.com>");
-MODULE_DESCRIPTION ("'cpufreq_stats' - A driver to export cpufreq stats through sysfs filesystem");
+MODULE_DESCRIPTION ("'cpufreq_stats' - A driver to export cpufreq stats"
+ "through sysfs filesystem");
MODULE_LICENSE ("GPL");
module_init(cpufreq_stats_init);
unsigned int event)
{
unsigned int cpu = policy->cpu;
+ int rc = 0;
+
switch (event) {
case CPUFREQ_GOV_START:
if (!cpu_online(cpu))
return -EINVAL;
BUG_ON(!policy->cur);
mutex_lock(&userspace_mutex);
+ rc = sysfs_create_file (&policy->kobj,
+ &freq_attr_scaling_setspeed.attr);
+ if (rc)
+ goto start_out;
+
cpu_is_managed[cpu] = 1;
cpu_min_freq[cpu] = policy->min;
cpu_max_freq[cpu] = policy->max;
cpu_cur_freq[cpu] = policy->cur;
cpu_set_freq[cpu] = policy->cur;
- sysfs_create_file (&policy->kobj, &freq_attr_scaling_setspeed.attr);
dprintk("managing cpu %u started (%u - %u kHz, currently %u kHz)\n", cpu, cpu_min_freq[cpu], cpu_max_freq[cpu], cpu_cur_freq[cpu]);
+start_out:
mutex_unlock(&userspace_mutex);
break;
case CPUFREQ_GOV_STOP:
mutex_unlock(&userspace_mutex);
break;
}
- return 0;
+ return rc;
}
#include <linux/init.h>
#include <linux/cpufreq.h>
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, "freq-table", msg)
+#define dprintk(msg...) \
+ cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, "freq-table", msg)
/*********************************************************************
* FREQUENCY TABLE HELPERS *
continue;
}
- dprintk("table entry %u: %u kHz, %u index\n", i, freq, table[i].index);
+ dprintk("table entry %u: %u kHz, %u index\n",
+ i, freq, table[i].index);
if (freq < min_freq)
min_freq = freq;
if (freq > max_freq)
unsigned int i;
unsigned int count = 0;
- dprintk("request for verification of policy (%u - %u kHz) for cpu %u\n", policy->min, policy->max, policy->cpu);
+ dprintk("request for verification of policy (%u - %u kHz) for cpu %u\n",
+ policy->min, policy->max, policy->cpu);
if (!cpu_online(policy->cpu))
return -EINVAL;
- cpufreq_verify_within_limits(policy,
- policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
+ cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+ policy->cpuinfo.max_freq);
for (i=0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
unsigned int freq = table[i].frequency;
if (!count)
policy->max = next_larger;
- cpufreq_verify_within_limits(policy,
- policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
+ cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+ policy->cpuinfo.max_freq);
- dprintk("verification lead to (%u - %u kHz) for cpu %u\n", policy->min, policy->max, policy->cpu);
+ dprintk("verification lead to (%u - %u kHz) for cpu %u\n",
+ policy->min, policy->max, policy->cpu);
return 0;
}
};
unsigned int i;
- dprintk("request for target %u kHz (relation: %u) for cpu %u\n", target_freq, relation, policy->cpu);
+ dprintk("request for target %u kHz (relation: %u) for cpu %u\n",
+ target_freq, relation, policy->cpu);
switch (relation) {
case CPUFREQ_RELATION_H:
}
struct freq_attr cpufreq_freq_attr_scaling_available_freqs = {
- .attr = { .name = "scaling_available_frequencies", .mode = 0444, .owner=THIS_MODULE },
+ .attr = { .name = "scaling_available_frequencies",
+ .mode = 0444,
+ .owner=THIS_MODULE
+ },
.show = show_available_freqs,
};
EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_available_freqs);
config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
int "Maximum transfer size (KB) per request (up to 128)"
default "128"
- depends BLK_DEV_IDE_AU1XXX
+ depends on BLK_DEV_IDE_AU1XXX
config IDE_ARM
def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
config LEDS_CLASS
tristate "LED Class Support"
- depends NEW_LEDS
+ depends on NEW_LEDS
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
config LEDS_CORGI
tristate "LED Support for the Sharp SL-C7x0 series"
- depends LEDS_CLASS && PXA_SHARP_C7xx
+ depends on LEDS_CLASS && PXA_SHARP_C7xx
help
This option enables support for the LEDs on Sharp Zaurus
SL-C7x0 series (C700, C750, C760, C860).
config LEDS_LOCOMO
tristate "LED Support for Locomo device"
- depends LEDS_CLASS && SHARP_LOCOMO
+ depends on LEDS_CLASS && SHARP_LOCOMO
help
This option enables support for the LEDs on Sharp Locomo.
Zaurus models SL-5500 and SL-5600.
config LEDS_SPITZ
tristate "LED Support for the Sharp SL-Cxx00 series"
- depends LEDS_CLASS && PXA_SHARP_Cxx00
+ depends on LEDS_CLASS && PXA_SHARP_Cxx00
help
This option enables support for the LEDs on Sharp Zaurus
SL-Cxx00 series (C1000, C3000, C3100).
config LEDS_IXP4XX
tristate "LED Support for GPIO connected LEDs on IXP4XX processors"
- depends LEDS_CLASS && ARCH_IXP4XX
+ depends on LEDS_CLASS && ARCH_IXP4XX
help
This option enables support for the LEDs connected to GPIO
outputs of the Intel IXP4XX processors. To be useful the
config LEDS_TOSA
tristate "LED Support for the Sharp SL-6000 series"
- depends LEDS_CLASS && PXA_SHARPSL
+ depends on LEDS_CLASS && PXA_SHARPSL
help
This option enables support for the LEDs on Sharp Zaurus
SL-6000 series.
config LEDS_AMS_DELTA
tristate "LED Support for the Amstrad Delta (E3)"
- depends LEDS_CLASS && MACH_AMS_DELTA
+ depends on LEDS_CLASS && MACH_AMS_DELTA
help
This option enables support for the LEDs on Amstrad Delta (E3).
config LEDS_TRIGGERS
bool "LED Trigger support"
- depends NEW_LEDS
+ depends on NEW_LEDS
help
This option enables trigger support for the leds class.
These triggers allow kernel events to drive the LEDs and can
config LEDS_TRIGGER_TIMER
tristate "LED Timer Trigger"
- depends LEDS_TRIGGERS
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a programmable timer
via sysfs. If unsure, say Y.
config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger"
- depends LEDS_TRIGGERS && BLK_DEV_IDEDISK
+ depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK
help
This allows LEDs to be controlled by IDE disk activity.
If unsure, say Y.
config LEDS_TRIGGER_HEARTBEAT
tristate "LED Heartbeat Trigger"
- depends LEDS_TRIGGERS
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a CPU load average.
The flash frequency is a hyperbolic function of the 1-minute
#include <linux/i2c.h>
-MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net.");
+MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors");
MODULE_LICENSE("GPL");
nic->rx_to_use = nic->rx_to_clean = NULL;
nic->ru_running = RU_UNINITIALIZED;
- if(!(nic->rxs = kmalloc(sizeof(struct rx) * count, GFP_ATOMIC)))
+ if(!(nic->rxs = kcalloc(count, sizeof(struct rx), GFP_ATOMIC)))
return -ENOMEM;
- memset(nic->rxs, 0, sizeof(struct rx) * count);
for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
rx->next = (i + 1 < count) ? rx + 1 : nic->rxs;
config V850E_UARTB
bool
- depends V850E_UART && V850E_ME2
+ depends on V850E_UART && V850E_ME2
default y
config V850E_UART_CONSOLE
config SERIAL_TXX9
bool "TMPTX39XX/49XX SIO support"
- depends HAS_TXX9_SERIAL
+ depends on HAS_TXX9_SERIAL
select SERIAL_CORE
default y
}
if ( (retval = pci_request_regions(dev, "icom"))) {
- dev_err(&dev->dev, "pci_request_region FAILED\n");
+ dev_err(&dev->dev, "pci_request_regions FAILED\n");
pci_disable_device(dev);
return retval;
}
Ext2 is a standard Linux file system for hard disks.
To compile this file system support as a module, choose M here: the
- module will be called ext2. Be aware however that the file system
- of your root partition (the one containing the directory /) cannot
- be compiled as a module, and so this could be dangerous.
+ module will be called ext2.
If unsure, say Y.
(available at <http://sourceforge.net/projects/e2fsprogs/>).
To compile this file system support as a module, choose M here: the
- module will be called ext3. Be aware however that the file system
- of your root partition (the one containing the directory /) cannot
- be compiled as a module, and so this may be dangerous.
+ module will be called ext3.
config EXT3_FS_XATTR
bool "Ext3 extended attributes"
features will be added to ext4dev gradually.
To compile this file system support as a module, choose M here. The
- module will be called ext4dev. Be aware, however, that the filesystem
- of your root partition (the one containing the directory /) cannot
- be compiled as a module, and so this could be dangerous.
+ module will be called ext4dev.
If unsure, say N.
config HUGETLBFS
bool "HugeTLB file system support"
- depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
+ depends on X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
help
hugetlbfs is a filesystem backing for HugeTLB pages, based on
ramfs. For architectures that support it, say Y here and read
return -ELIBBAD;
size = sizeof(*loadmap) + nloads * sizeof(*seg);
- loadmap = kmalloc(size, GFP_KERNEL);
+ loadmap = kzalloc(size, GFP_KERNEL);
if (!loadmap)
return -ENOMEM;
params->loadmap = loadmap;
- memset(loadmap, 0, size);
loadmap->version = ELF32_FDPIC_LOADMAP_VERSION;
loadmap->nsegs = nloads;
#define MSR_P6_PERFCTR0 0xc1
#define MSR_P6_PERFCTR1 0xc2
+#define MSR_FSB_FREQ 0xcd
+
#define MSR_IA32_BBL_CR_CTL 0x119
#define MSR_IA32_PERF_STATUS 0x198
#define MSR_IA32_PERF_CTL 0x199
+#define MSR_IA32_MPERF 0xE7
+#define MSR_IA32_APERF 0xE8
+
#define MSR_IA32_THERM_CONTROL 0x19a
#define MSR_IA32_THERM_INTERRUPT 0x19b
#define MSR_IA32_THERM_STATUS 0x19c
#define MSR_IA32_PERFCTR0 0xc1
#define MSR_IA32_PERFCTR1 0xc2
+#define MSR_FSB_FREQ 0xcd
#define MSR_MTRRcap 0x0fe
#define MSR_IA32_BBL_CR_CTL 0x119
#define MSR_IA32_PERF_STATUS 0x198
#define MSR_IA32_PERF_CTL 0x199
+#define MSR_IA32_MPERF 0xE7
+#define MSR_IA32_APERF 0xE8
+
#define MSR_IA32_THERM_CONTROL 0x19a
#define MSR_IA32_THERM_INTERRUPT 0x19b
#define MSR_IA32_THERM_STATUS 0x19c
#error no compiler-gcc.h file for this gcc version
#elif __GNUC__ == 4
# include <linux/compiler-gcc4.h>
-#elif __GNUC__ == 3
+#elif __GNUC__ == 3 && __GNUC_MINOR__ >= 2
# include <linux/compiler-gcc3.h>
#else
# error Sorry, your compiler is too old/not recognized.
void (*drop_item)(struct config_group *group, struct config_item *item);
};
-
-
-/**
- * Use these macros to make defining attributes easier. See include/linux/device.h
- * for examples..
- */
-
-#if 0
-#define __ATTR(_name,_mode,_show,_store) { \
- .attr = {.ca_name = __stringify(_name), .ca_mode = _mode, .ca_owner = THIS_MODULE }, \
- .show = _show, \
- .store = _store, \
-}
-
-#define __ATTR_RO(_name) { \
- .attr = { .ca_name = __stringify(_name), .ca_mode = 0444, .ca_owner = THIS_MODULE }, \
- .show = _name##_show, \
-}
-
-#define __ATTR_NULL { .attr = { .name = NULL } }
-
-#define attr_name(_attr) (_attr).attr.name
-#endif
-
-
struct configfs_subsystem {
struct config_group su_group;
struct semaphore su_sem;
unsigned int relation);
+extern int cpufreq_driver_getavg(struct cpufreq_policy *policy);
+
int cpufreq_register_governor(struct cpufreq_governor *governor);
void cpufreq_unregister_governor(struct cpufreq_governor *governor);
unsigned int (*get) (unsigned int cpu);
/* optional */
+ unsigned int (*getavg) (unsigned int cpu);
int (*exit) (struct cpufreq_policy *policy);
int (*suspend) (struct cpufreq_policy *policy, pm_message_t pmsg);
int (*resume) (struct cpufreq_policy *policy);
** the sysctl() binary interface. Do *NOT* change the
** numbering of any existing values here, and do not change
** any numbers within any one set of values. If you have to
- ** have to redefine an existing interface, use a new number for it.
+ ** redefine an existing interface, use a new number for it.
** The kernel will then return -ENOTDIR to any application using
** the old binary interface.
**
If unsure say Y here.
config KALLSYMS
- bool "Load all symbols for debugging/kksymoops" if EMBEDDED
+ bool "Load all symbols for debugging/ksymoops" if EMBEDDED
default y
help
Say Y here to let the kernel print out symbolic crash information and
Provide fault-injection capability for alloc_pages().
config FAIL_MAKE_REQUEST
- bool "Fault-injection capabilitiy for disk IO"
+ bool "Fault-injection capability for disk IO"
depends on FAULT_INJECTION
help
Provide fault-injection capability for disk IO.
} else {
struct sk_buff *free_it = next;
- /* Old fragmnet is completely overridden with
+ /* Old fragment is completely overridden with
* new one drop it.
*/
next = next->next;
config SND_AOA_FABRIC_LAYOUT
tristate "layout-id fabric"
- depends SND_AOA
+ depends on SND_AOA
select SND_AOA_SOUNDBUS
select SND_AOA_SOUNDBUS_I2S
---help---
git.openpandora.org / pandora-kernel.git / commitdiff