* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
rcu: create rcu_my_thread_group_empty() wrapper
memcg: css_id() must be called under rcu_read_lock()
cgroup: Check task_lock in task_subsys_state()
sched: Fix an RCU warning in print_task()
cgroup: Fix an RCU warning in alloc_css_id()
cgroup: Fix an RCU warning in cgroup_path()
KEYS: Fix an RCU warning in the reading of user keys
KEYS: Fix an RCU warning
issue of SET FEATURES - XFER MODE, and prior to operation.
</para>
<para>
- Called by ata_device_add() after ata_dev_identify() determines
- a device is present.
- </para>
- <para>
This entry may be specified as NULL in ata_port_operations.
</para>
<sect2><title>Taskfile read/write</title>
<programlisting>
-void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
-void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
</programlisting>
<para>
hardware registers / DMA buffers, to obtain the current set of
taskfile register values.
Most drivers for taskfile-based hardware (PIO or MMIO) use
- ata_tf_load() and ata_tf_read() for these hooks.
+ ata_sff_tf_load() and ata_sff_tf_read() for these hooks.
</para>
</sect2>
<sect2><title>PIO data read/write</title>
<programlisting>
-void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
+void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
</programlisting>
<para>
All bmdma-style drivers must implement this hook. This is the low-level
operation that actually copies the data bytes during a PIO data
transfer.
-Typically the driver
-will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or
-ata_mmio_data_xfer().
+Typically the driver will choose one of ata_sff_data_xfer_noirq(),
+ata_sff_data_xfer(), or ata_sff_data_xfer32().
</para>
</sect2>
<sect2><title>ATA command execute</title>
<programlisting>
-void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
</programlisting>
<para>
causes an ATA command, previously loaded with
->tf_load(), to be initiated in hardware.
- Most drivers for taskfile-based hardware use ata_exec_command()
+ Most drivers for taskfile-based hardware use ata_sff_exec_command()
for this hook.
</para>
<sect2><title>Read specific ATA shadow registers</title>
<programlisting>
-u8 (*check_status)(struct ata_port *ap);
-u8 (*check_altstatus)(struct ata_port *ap);
+u8 (*sff_check_status)(struct ata_port *ap);
+u8 (*sff_check_altstatus)(struct ata_port *ap);
</programlisting>
<para>
hardware. On some hardware, reading the Status register has
the side effect of clearing the interrupt condition.
Most drivers for taskfile-based hardware use
- ata_check_status() for this hook.
- </para>
- <para>
- Note that because this is called from ata_device_add(), at
- least a dummy function that clears device interrupts must be
- provided for all drivers, even if the controller doesn't
- actually have a taskfile status register.
+ ata_sff_check_status() for this hook.
</para>
</sect2>
<sect2><title>Select ATA device on bus</title>
<programlisting>
-void (*dev_select)(struct ata_port *ap, unsigned int device);
+void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
</programlisting>
<para>
</para>
<para>
Most drivers for taskfile-based hardware use
- ata_std_dev_select() for this hook. Controllers which do not
- support second drives on a port (such as SATA contollers) will
- use ata_noop_dev_select().
+ ata_sff_dev_select() for this hook.
</para>
</sect2>
to struct ata_host_set.
</para>
<para>
- Most legacy IDE drivers use ata_interrupt() for the
+ Most legacy IDE drivers use ata_sff_interrupt() for the
irq_handler hook, which scans all ports in the host_set,
determines which queued command was active (if any), and calls
- ata_host_intr(ap,qc).
+ ata_sff_host_intr(ap,qc).
</para>
<para>
- Most legacy IDE drivers use ata_bmdma_irq_clear() for the
+ Most legacy IDE drivers use ata_sff_irq_clear() for the
irq_clear() hook, which simply clears the interrupt and error
flags in the DMA status register.
</para>
data from port at this time.
</para>
<para>
- Many drivers use ata_port_stop() as this hook, which frees the
- PRD table.
- </para>
- <para>
->host_stop() is called after all ->port_stop() calls
have completed. The hook must finalize hardware shutdown, release DMA
and other resources, etc.
- cgroup.procs: list of tgids in the cgroup. This list is not
guaranteed to be sorted or free of duplicate tgids, and userspace
should sort/uniquify the list if this property is required.
- Writing a tgid into this file moves all threads with that tgid into
- this cgroup.
+ This is a read-only file, for now.
- notify_on_release flag: run the release agent on exit?
- release_agent: the path to use for release notifications (this file
exists in the top cgroup only)
/* retrieve the value */
void *i2c_get_clientdata(const struct i2c_client *client);
+Note that starting with kernel 2.6.34, you don't have to set the `data' field
+to NULL in remove() or if probe() failed anymore. The i2c-core does this
+automatically on these occasions. Those are also the only times the core will
+touch this field.
+
Accessing the client
====================
byte 1:
bit 7 6 5 4 3 2 1 0
- x15 x14 x13 x12 x11 x10 x9 x8
+ . . . . . x10 x9 x8
byte 2:
bit 7 6 5 4 3 2 1 0
x7 x6 x5 x4 x4 x2 x1 x0
- x15..x0 = absolute x value (horizontal)
+ x10..x0 = absolute x value (horizontal)
byte 3:
byte 4:
bit 7 6 5 4 3 2 1 0
- y15 y14 y13 y12 y11 y10 y8 y8
+ . . . . . . y9 y8
byte 5:
bit 7 6 5 4 3 2 1 0
y7 y6 y5 y4 y3 y2 y1 y0
- y15..y0 = absolute y value (vertical)
+ y9..y0 = absolute y value (vertical)
4.2.2 Two finger touch
};
ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
- if (ret == 1)
+ if (ret < 1)
pabort("can't send spi message");
for (ret = 0; ret < ARRAY_SIZE(tx); ret++) {
F: drivers/ata/sata_promise.*
PS3 NETWORK SUPPORT
-M: Geoff Levand <geoffrey.levand@am.sony.com>
+M: Geoff Levand <geoff@infradead.org>
L: netdev@vger.kernel.org
L: cbe-oss-dev@ozlabs.org
-S: Supported
+S: Maintained
F: drivers/net/ps3_gelic_net.*
PS3 PLATFORM SUPPORT
-M: Geoff Levand <geoffrey.levand@am.sony.com>
+M: Geoff Levand <geoff@infradead.org>
L: linuxppc-dev@ozlabs.org
L: cbe-oss-dev@ozlabs.org
-S: Supported
+S: Maintained
F: arch/powerpc/boot/ps3*
F: arch/powerpc/include/asm/lv1call.h
F: arch/powerpc/include/asm/ps3*.h
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 34
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
NAME = Sheep on Meth
# *DOCUMENTATION*
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select GPIO_PL061 if GPIOLIB
help
This enables support for ARM Ltd RealView boards.
W(b) __armv4_mmu_cache_off
W(b) __armv4_mmu_cache_flush
- .word 0x56056930
- .word 0xff0ffff0 @ PXA935
+ .word 0x56056900
+ .word 0xffffff00 @ PXA9xx
W(b) __armv4_mmu_cache_on
W(b) __armv4_mmu_cache_off
W(b) __armv4_mmu_cache_flush
W(b) __armv4_mmu_cache_off
W(b) __armv5tej_mmu_cache_flush
- .word 0x56056930
- .word 0xff0ffff0 @ PXA935
- W(b) __armv4_mmu_cache_on
- W(b) __armv4_mmu_cache_off
- W(b) __armv4_mmu_cache_flush
-
.word 0x56050000 @ Feroceon
.word 0xff0f0000
W(b) __armv4_mmu_cache_on
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Fri Jul 17 12:07:28 2009
+# Linux kernel version: 2.6.34-rc2
+# Mon Mar 29 12:01:41 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
# CONFIG_AIO is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_PERF_COUNTERS=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
+CONFIG_ARCH_BCMRING=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_BCMRING=y
# CONFIG_ARCH_FPGA11107 is not set
CONFIG_ARCH_BCM11107=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_COMMON_CLKDEV=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
+CONFIG_HW_PERF_EVENTS=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
CONFIG_UACCESS_WITH_MEMCPY=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_MD is not set
# CONFIG_NETDEVICES is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_FILE_LOCKING is not set
# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_ARM_UNWIND is not set
# CONFIG_DEBUG_USER is not set
+# CONFIG_OC_ETM is not set
#
# Security options
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc8
-# Sat Feb 13 21:48:53 2010
+# Linux kernel version: 2.6.34-rc2
+# Thu Apr 8 14:49:08 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
#
# Intel PXA2xx/PXA3xx Implementations
# CONFIG_MACH_EM_X270 is not set
# CONFIG_MACH_EXEDA is not set
# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_CAPC7117 is not set
# CONFIG_ARCH_GUMSTIX is not set
CONFIG_MACH_INTELMOTE2=y
# CONFIG_MACH_STARGATE2 is not set
# CONFIG_PXA_EZX is not set
# CONFIG_MACH_MP900C is not set
# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_RAUMFELD_RC is not set
+# CONFIG_MACH_RAUMFELD_CONNECTOR is not set
+# CONFIG_MACH_RAUMFELD_SPEAKER is not set
# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_ICONTROL is not set
# CONFIG_ARCH_PXA_ESERIES is not set
CONFIG_PXA27x=y
CONFIG_PXA_SSP=y
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
+CONFIG_CPU_HAS_PMU=y
CONFIG_COMMON_CLKDEV=y
#
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
CONFIG_ATAGS_PROC=y
#
# CPU Power Management
#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_LED=m
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-# CONFIG_BT_ATH3K is not set
+# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_AR7_PARTS=y
#
# User Modules And Translation Layers
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_I2C_PXA=y
# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_TC6393XB is not set
CONFIG_PMIC_DA903X=y
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_DA903X=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_VIDEO_SAA7191 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_VPX3220 is not set
#
CONFIG_VIDEO_PXA27x=y
# CONFIG_VIDEO_SH_MOBILE_CEU is not set
# CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_I2C_SI4713 is not set
-# CONFIG_RADIO_SI4713 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_RADIO_SI470X is not set
-# CONFIG_USB_MR800 is not set
-CONFIG_RADIO_TEA5764=y
-CONFIG_RADIO_TEA5764_XTAL=y
-# CONFIG_RADIO_TEF6862 is not set
+# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
#
#
# Special HID drivers
#
-CONFIG_HID_APPLE=m
-# CONFIG_HID_WACOM is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
#
#
CONFIG_MMC_PXA=y
# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=y
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
-CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
+CONFIG_RTC_DRV_PXA=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
#
# CD-ROM/DVD Filesystems
#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
+# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
+# CONFIG_PROVE_RCU is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
#define USER(x...) \
9999: x; \
- .section __ex_table,"a"; \
+ .pushsection __ex_table,"a"; \
.align 3; \
.long 9999b,9001f; \
- .previous
+ .popsection
/*
* SMP data memory barrier
.error "Unsupported inc macro argument"
.endif
- .section __ex_table,"a"
+ .pushsection __ex_table,"a"
.align 3
.long 9999b, \abort
- .previous
+ .popsection
.endm
.macro usracc, instr, reg, ptr, inc, cond, rept, abort
.error "Unsupported inc macro argument"
.endif
- .section __ex_table,"a"
+ .pushsection __ex_table,"a"
.align 3
.long 9999b, \abort
- .previous
+ .popsection
.endr
.endm
#include <asm/ptrace.h>
#include <asm/user.h>
+struct task_struct;
+
typedef unsigned long elf_greg_t;
typedef unsigned long elf_freg_t[3];
"2: strt %0, [%2]\n" \
" mov %0, #0\n" \
"3:\n" \
- " .section __ex_table,\"a\"\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 4f, 2b, 4f\n" \
- " .previous\n" \
- " .section .fixup,\"ax\"\n" \
+ " .popsection\n" \
+ " .pushsection .fixup,\"ax\"\n" \
"4: mov %0, %4\n" \
" b 3b\n" \
- " .previous" \
+ " .popsection" \
: "=&r" (ret), "=&r" (oldval) \
: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \
: "cc", "memory")
" it eq @ explicit IT needed for the 2b label\n"
"2: streqt %2, [%3]\n"
"3:\n"
- " .section __ex_table,\"a\"\n"
+ " .pushsection __ex_table,\"a\"\n"
" .align 3\n"
" .long 1b, 4f, 2b, 4f\n"
- " .previous\n"
- " .section .fixup,\"ax\"\n"
+ " .popsection\n"
+ " .pushsection .fixup,\"ax\"\n"
"4: mov %0, %4\n"
" b 3b\n"
- " .previous"
+ " .popsection"
: "=&r" (val)
: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
: "cc", "memory");
__asm__ __volatile__( \
"1: ldrbt %1,[%2]\n" \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" mov %1, #0\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous" \
+ " .popsection" \
: "+r" (err), "=&r" (x) \
: "r" (addr), "i" (-EFAULT) \
: "cc")
__asm__ __volatile__( \
"1: ldrt %1,[%2]\n" \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" mov %1, #0\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous" \
+ " .popsection" \
: "+r" (err), "=&r" (x) \
: "r" (addr), "i" (-EFAULT) \
: "cc")
__asm__ __volatile__( \
"1: strbt %1,[%2]\n" \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous" \
+ " .popsection" \
: "+r" (err) \
: "r" (x), "r" (__pu_addr), "i" (-EFAULT) \
: "cc")
__asm__ __volatile__( \
"1: strt %1,[%2]\n" \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous" \
+ " .popsection" \
: "+r" (err) \
: "r" (x), "r" (__pu_addr), "i" (-EFAULT) \
: "cc")
THUMB( "1: strt " __reg_oper1 ", [%1]\n" ) \
THUMB( "2: strt " __reg_oper0 ", [%1, #4]\n" ) \
"3:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"4: mov %0, %3\n" \
" b 3b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 4b\n" \
" .long 2b, 4b\n" \
- " .previous" \
+ " .popsection" \
: "+r" (err), "+r" (__pu_addr) \
: "r" (x), "i" (-EFAULT) \
: "cc")
/*
* The out of line fixup for the ldrt above.
*/
- .section .fixup, "ax"
+ .pushsection .fixup, "ax"
4: mov pc, r9
- .previous
- .section __ex_table,"a"
+ .popsection
+ .pushsection __ex_table,"a"
.long 1b, 4b
#if __LINUX_ARM_ARCH__ >= 7
.long 2b, 4b
.long 3b, 4b
#endif
- .previous
+ .popsection
/*
* Check whether the instruction is a co-processor instruction.
* lr = unrecognised FP instruction return address
*/
- .data
+ .pushsection .data
ENTRY(fp_enter)
.word no_fp
- .previous
+ .popsection
ENTRY(no_fp)
mov pc, lr
" movne %0, #2 \n"
"3:\n"
- ".section .fixup, \"ax\"\n"
+ ".pushsection .fixup, \"ax\"\n"
"4: mov %0, #1 \n"
" b 3b \n"
- ".previous\n"
+ ".popsection\n"
- ".section __ex_table, \"a\"\n"
+ ".pushsection __ex_table, \"a\"\n"
" .long 1b, 4b \n"
" .long 2b, 4b \n"
- ".previous\n"
+ ".popsection\n"
: "=r"(err), "=r"(replaced)
: "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced)
* the thread function, and r3 points to the exit function.
*/
extern void kernel_thread_helper(void);
-asm( ".section .text\n"
+asm( ".pushsection .text\n"
" .align\n"
" .type kernel_thread_helper, #function\n"
"kernel_thread_helper:\n"
" mov lr, r3\n"
" mov pc, r2\n"
" .size kernel_thread_helper, . - kernel_thread_helper\n"
-" .previous");
+" .popsection");
#ifdef CONFIG_ARM_UNWIND
extern void kernel_thread_exit(long code);
-asm( ".section .text\n"
+asm( ".pushsection .text\n"
" .align\n"
" .type kernel_thread_exit, #function\n"
"kernel_thread_exit:\n"
" nop\n"
" .fnend\n"
" .size kernel_thread_exit, . - kernel_thread_exit\n"
-" .previous");
+" .popsection");
#else
#define kernel_thread_exit do_exit
#endif
return PTR_ERR(idle);
}
ci->idle = idle;
+ } else {
+ /*
+ * Since this idle thread is being re-used, call
+ * init_idle() to reinitialize the thread structure.
+ */
+ init_idle(idle, cpu);
}
/*
ENDPROC(__backtrace)
ENDPROC(c_backtrace)
- .section __ex_table,"a"
+ .pushsection __ex_table,"a"
.align 3
.long 1001b, 1006b
.long 1002b, 1006b
.long 1003b, 1006b
.long 1004b, 1006b
- .previous
+ .popsection
#define instr r4
#define reg r5
ldmfd sp!, {r1, pc}
ENDPROC(__clear_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
9001: ldmfd sp!, {r0, pc}
- .previous
+ .popsection
ENDPROC(__copy_from_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
copy_abort_preamble
ldmfd sp!, {r1, r2}
bl __memzero
ldr r0, [sp], #4
copy_abort_end
- .previous
+ .popsection
ENDPROC(__copy_to_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
copy_abort_preamble
ldmfd sp!, {r1, r2, r3}
sub r0, r0, r1
rsb r0, r0, r2
copy_abort_end
- .previous
+ .popsection
* so properly, we would have to add in whatever registers were loaded before
* the fault, which, with the current asm above is not predictable.
*/
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 4
9001: mov r4, #-EFAULT
ldr r5, [fp, #4] @ *err_ptr
strneb r0, [r1], #1
bne 9002b
load_regs
- .previous
+ .popsection
mov pc, lr
ENDPROC(__get_user_bad)
-.section __ex_table, "a"
+.pushsection __ex_table, "a"
.long 1b, __get_user_bad
.long 2b, __get_user_bad
.long 3b, __get_user_bad
.long 4b, __get_user_bad
-.previous
+.popsection
mov pc, lr
ENDPROC(__put_user_bad)
-.section __ex_table, "a"
+.pushsection __ex_table, "a"
.long 1b, __put_user_bad
.long 2b, __put_user_bad
.long 3b, __put_user_bad
.long 4b, __put_user_bad
.long 5b, __put_user_bad
.long 6b, __put_user_bad
-.previous
+.popsection
mov pc, lr
ENDPROC(__strncpy_from_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
9001: mov r3, #0
strb r3, [r0, #0] @ null terminate
mov r0, #-EFAULT
mov pc, lr
- .previous
+ .popsection
mov pc, lr
ENDPROC(__strnlen_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
9001: mov r0, #0
mov pc, lr
- .previous
+ .popsection
b .Lc2u_finished
ENDPROC(__copy_to_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
9001: ldmfd sp!, {r0, r4 - r7, pc}
- .previous
+ .popsection
/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n);
* Purpose : copy a block from user memory to kernel memory
b .Lcfu_finished
ENDPROC(__copy_from_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
/*
* We took an exception. r0 contains a pointer to
blne __memzero
mov r0, r4
ldmfd sp!, {r4 - r7, pc}
- .previous
+ .popsection
#include <linux/io.h>
#include <asm/clkdev.h>
+#include <asm/div64.h>
#include <mach/hardware.h>
#include <mach/common.h>
* ---------------------------------------------------------------------------
*/
-#if defined(CONFIG_ARCH_OMAP16XX)
-#define TIMER_32K_SYNCHRONIZED 0xfffbc410
-#else
-#error OMAP 32KHz timer does not currently work on 15XX!
-#endif
-
/* 16xx specific defines */
#define OMAP1_32K_TIMER_BASE 0xfffb9000
#define OMAP1_32K_TIMER_CR 0x08
.set_mode = omap_32k_timer_set_mode,
};
-/*
- * The 32KHz synchronized timer is an additional timer on 16xx.
- * It is always running.
- */
-static inline unsigned long omap_32k_sync_timer_read(void)
-{
- return omap_readl(TIMER_32K_SYNCHRONIZED);
-}
-
static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &clockevent_32k_timer;
select OMAP_PACKAGE_CBB
config MACH_DEVKIT8000
- bool "DEVKIT8000 board"
- depends on ARCH_OMAP3
+ bool "DEVKIT8000 board"
+ depends on ARCH_OMAP3
+ select OMAP_PACKAGE_CUS
+ select OMAP_MUX
config MACH_OMAP_LDP
bool "OMAP3 LDP board"
static void __init omap_sdp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
+ omap_serial_init();
zoom_peripherals_init();
board_smc91x_init();
enable_board_wakeup_source();
static void __init am3517_evm_init(void)
{
- am3517_evm_i2c_init();
-
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+
+ am3517_evm_i2c_init();
platform_add_devices(am3517_evm_devices,
ARRAY_SIZE(am3517_evm_devices));
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
-#include <linux/usb/otg.h>
#include <linux/dm9000.h>
#include <linux/interrupt.h>
devkit8000_vmmc1_supply.dev = mmc[0].dev;
devkit8000_vsim_supply.dev = mmc[0].dev;
- /* REVISIT: need ehci-omap hooks for external VBUS
- * power switch and overcurrent detect
- */
-
- gpio_request(gpio + 1, "EHCI_nOC");
- gpio_direction_input(gpio + 1);
-
- /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
- gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
- gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
-
- /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
return 0;
}
.dev = &devkit8000_lcd_device.dev,
},
{
- .supply = "vdss_dsi",
+ .supply = "vdds_dsi",
.dev = &devkit8000_dss_device.dev,
}
};
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
- .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 147,
+ .reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL
};
static void __init devkit8000_init(void)
{
+ omap_serial_init();
+
+ omap_dm9000_init();
+
devkit8000_i2c_init();
platform_add_devices(devkit8000_devices,
ARRAY_SIZE(devkit8000_devices));
spi_register_board_info(devkit8000_spi_board_info,
ARRAY_SIZE(devkit8000_spi_board_info));
- omap_serial_init();
-
- omap_dm9000_init();
-
devkit8000_ads7846_init();
- omap_mux_init_gpio(170, OMAP_PIN_INPUT);
-
- gpio_request(170, "DVI_nPD");
- /* REVISIT leave DVI powered down until it's needed ... */
- gpio_direction_output(170, true);
-
usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
devkit8000_flash_init();
/* Ensure SDRC pins are mux'd for self-refresh */
- omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
static void __init devkit8000_map_io(void)
};
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
- .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
- .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = IGEP2_GPIO_USBH_NRESET,
+ .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
+ .reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL,
};
*/
#define N8X0_SLOT_SWITCH_GPIO 96
#define N810_EMMC_VSD_GPIO 23
-#define NN810_EMMC_VIO_GPIO 9
+#define N810_EMMC_VIO_GPIO 9
static int n8x0_mmc_switch_slot(struct device *dev, int slot)
{
if (power_on) {
gpio_set_value(N810_EMMC_VSD_GPIO, 1);
msleep(1);
- gpio_set_value(NN810_EMMC_VIO_GPIO, 1);
+ gpio_set_value(N810_EMMC_VIO_GPIO, 1);
msleep(1);
} else {
- gpio_set_value(NN810_EMMC_VIO_GPIO, 0);
+ gpio_set_value(N810_EMMC_VIO_GPIO, 0);
msleep(50);
gpio_set_value(N810_EMMC_VSD_GPIO, 0);
msleep(50);
if (machine_is_nokia_n810()) {
gpio_free(N810_EMMC_VSD_GPIO);
- gpio_free(NN810_EMMC_VIO_GPIO);
+ gpio_free(N810_EMMC_VIO_GPIO);
}
}
err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch");
if (err)
- return err;
+ return;
gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0);
err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf");
if (err) {
gpio_free(N8X0_SLOT_SWITCH_GPIO);
- return err;
+ return;
}
gpio_direction_output(N810_EMMC_VSD_GPIO, 0);
- err = gpio_request(NN810_EMMC_VIO_GPIO, "MMC slot 2 Vdd");
+ err = gpio_request(N810_EMMC_VIO_GPIO, "MMC slot 2 Vdd");
if (err) {
gpio_free(N8X0_SLOT_SWITCH_GPIO);
gpio_free(N810_EMMC_VSD_GPIO);
- return err;
+ return;
}
- gpio_direction_output(NN810_EMMC_VIO_GPIO, 0);
+ gpio_direction_output(N810_EMMC_VIO_GPIO, 0);
}
mmc_data[0] = &mmc1_data;
}
if (norcs > GPMC_CS_NUM)
- printk(KERN_INFO "OneNAND: Unable to find configuration "
- " in GPMC\n ");
+ printk(KERN_INFO "NOR: Unable to find configuration "
+ "in GPMC\n");
else
board_nor_init(sdp_partition_info[0], norcs);
if (onenandcs > GPMC_CS_NUM)
printk(KERN_INFO "OneNAND: Unable to find configuration "
- " in GPMC\n ");
+ "in GPMC\n");
else
board_onenand_init(sdp_partition_info[1], onenandcs);
if (nandcs > GPMC_CS_NUM)
printk(KERN_INFO "NAND: Unable to find configuration "
- " in GPMC\n ");
+ "in GPMC\n");
else
board_nand_init(sdp_partition_info[2], nandcs);
}
static struct platform_device zoom_debugboard_serial_device = {
.name = "serial8250",
- .id = 3,
+ .id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data,
},
void __init zoom_peripherals_init(void)
{
omap_i2c_init();
- omap_serial_init();
usb_musb_init(&musb_board_data);
enable_board_wakeup_source();
}
.ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m4_ck,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
- .enable_bit = OMAP3430_PWRDN_CAM_SHIFT,
+ .enable_bit = OMAP3430_PWRDN_DSS1_SHIFT,
.flags = INVERT_ENABLE,
.clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_443X),
CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_443X),
CLK("omap-mcbsp.4", "ick", &dummy_ck, CK_443X),
- CLK("omap-mcspi.1", "ick", &dummy_ck, CK_443X),
- CLK("omap-mcspi.2", "ick", &dummy_ck, CK_443X),
- CLK("omap-mcspi.3", "ick", &dummy_ck, CK_443X),
- CLK("omap-mcspi.4", "ick", &dummy_ck, CK_443X),
+ CLK("omap2_mcspi.1", "ick", &dummy_ck, CK_443X),
+ CLK("omap2_mcspi.2", "ick", &dummy_ck, CK_443X),
+ CLK("omap2_mcspi.3", "ick", &dummy_ck, CK_443X),
+ CLK("omap2_mcspi.4", "ick", &dummy_ck, CK_443X),
CLK(NULL, "uart1_ick", &dummy_ck, CK_443X),
CLK(NULL, "uart2_ick", &dummy_ck, CK_443X),
CLK(NULL, "uart3_ick", &dummy_ck, CK_443X),
bits = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
else
bits = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
- } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
+ } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
if (enable)
bits = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
else
cm_set_mod_reg_bits(OMAP24XX_FORCESTATE,
clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
- } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
+ } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_SLEEP <<
__ffs(clkdm->clktrctrl_mask));
cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE,
clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
- } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
+ } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_WAKEUP <<
__ffs(clkdm->clktrctrl_mask));
if (!cpu_is_omap44xx())
return;
base = OMAP4_MMC5_BASE + OMAP4_MMC_REG_OFFSET;
- irq = OMAP44XX_IRQ_MMC4;
+ irq = OMAP44XX_IRQ_MMC5;
break;
default:
continue;
struct gpmc_timings t;
int err;
+ if (!gpmc_nand_data->gpmc_t)
+ return 0;
+
memset(&t, 0, sizeof(t));
t.sync_clk = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->sync_clk);
t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);
mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision
and \tmp, \tmp, #0x000f0000 @ only check architecture
- cmp \tmp, #0x00060000 @ is v6?
+ cmp \tmp, #0x00070000 @ is v6?
beq 2400f @ found v6 so it's omap24xx
mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision
and \tmp, \tmp, #0x000000f0 @ check cortex 8 or 9
ENTRY(omap_secondary_startup)
hold: ldr r12,=0x103
dsb
- smc @ read from AuxCoreBoot0
+ smc #0 @ read from AuxCoreBoot0
mov r0, r0, lsr #9
mrc p15, 0, r4, c0, c0, 5
and r4, r4, #0x0f
stmfd sp!, {r1-r12, lr}
ldr r12, =0x104
dsb
- smc
+ smc #0
ldmfd sp!, {r1-r12, pc}
END(omap_modify_auxcoreboot0)
stmfd sp!, {r2-r12, lr}
ldr r12, =0x105
dsb
- smc
+ smc #0
ldmfd sp!, {r2-r12, pc}
END(omap_auxcoreboot_addr)
mov r12, r0
mov r0, r1
dsb
- smc
+ smc #0
ldmfd sp!, {r2-r12, pc}
END(omap_smc1)
c = oh->slaves[oh->_mpu_port_index]->_clk;
}
+ if (!c->clkdm)
+ return NULL;
+
return c->clkdm->pwrdm.ptr;
}
{
struct powerdomain **p = NULL;
- if (cpu_is_omap24xx() | cpu_is_omap34xx()) {
+ if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
pwrstctrl_reg_offs = OMAP2_PM_PWSTCTRL;
pwrstst_reg_offs = OMAP2_PM_PWSTST;
} else if (cpu_is_omap44xx()) {
u32 omap_prcm_get_reset_sources(void)
{
/* XXX This presumably needs modification for 34XX */
- if (cpu_is_omap24xx() | cpu_is_omap34xx())
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
return prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f;
if (cpu_is_omap44xx())
return prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f;
else
WARN_ON(1);
- if (cpu_is_omap24xx() | cpu_is_omap34xx())
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs,
OMAP2_RM_RSTCTRL);
if (cpu_is_omap44xx())
}
};
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
static struct plat_serial8250_port serial_platform_data3[] = {
{
.irq = 70,
}
};
-static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals)
-{
- serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
-}
-#else
-static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals)
-{
-}
-#endif
-
void __init omap2_set_globals_uart(struct omap_globals *omap2_globals)
{
serial_platform_data0[0].mapbase = omap2_globals->uart1_phys;
serial_platform_data1[0].mapbase = omap2_globals->uart2_phys;
serial_platform_data2[0].mapbase = omap2_globals->uart3_phys;
- if (cpu_is_omap3630() || cpu_is_omap44xx())
- omap2_set_globals_uart4(omap2_globals);
+ serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
}
static inline unsigned int __serial_read_reg(struct uart_port *up,
unsigned int value;
if (sscanf(buf, "%u", &value) != 1) {
- printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
+ dev_err(dev, "sleep_timeout_store: Invalid value\n");
return -EINVAL;
}
struct device *dev = &pdev->dev;
struct plat_serial8250_port *p = dev->platform_data;
+ /* Don't map zero-based physical address */
+ if (p->mapbase == 0) {
+ dev_warn(dev, "no physical address for uart#%d,"
+ " so skipping early_init...\n", i);
+ continue;
+ }
/*
* Module 4KB + L4 interconnect 4KB
* Static mapping, never released
*/
p->membase = ioremap(p->mapbase, SZ_8K);
if (!p->membase) {
- printk(KERN_ERR "ioremap failed for uart%i\n", i + 1);
+ dev_err(dev, "ioremap failed for uart%i\n", i + 1);
continue;
}
sprintf(name, "uart%d_ick", i + 1);
uart->ick = clk_get(NULL, name);
if (IS_ERR(uart->ick)) {
- printk(KERN_ERR "Could not get uart%d_ick\n", i + 1);
+ dev_err(dev, "Could not get uart%d_ick\n", i + 1);
uart->ick = NULL;
}
sprintf(name, "uart%d_fck", i+1);
uart->fck = clk_get(NULL, name);
if (IS_ERR(uart->fck)) {
- printk(KERN_ERR "Could not get uart%d_fck\n", i + 1);
+ dev_err(dev, "Could not get uart%d_fck\n", i + 1);
uart->fck = NULL;
}
pdev = &uart->pdev;
dev = &pdev->dev;
+ /* Don't proceed if there's no clocks available */
+ if (unlikely(!uart->ick || !uart->fck)) {
+ WARN(1, "%s: can't init uart%d, no clocks available\n",
+ kobject_name(&dev->kobj), port);
+ return;
+ }
+
omap_uart_enable_clocks(uart);
omap_uart_reset(uart);
#define _COLIBRI_H_
#include <net/ax88796.h>
+#include <mach/mfp.h>
/*
* common settings for all modules
#define __cpu_is_pxa950(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
- id == 0x697; \
+ _id == 0x697; \
})
#else
#define __cpu_is_pxa950(id) (0)
#define U2DMACSR_BUSERRTYPE (7 << 10) /* PX Bus Error Type */
#define U2DMACSR_EORINTR (1 << 9) /* End Of Receive */
#define U2DMACSR_REQPEND (1 << 8) /* Request Pending */
-#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */
+#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */
+#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */
#define U2DMACSR_ENDINTR (1 << 2) /* End Interrupt (read / write 1 clear) */
#define U2DMACSR_STARTINTR (1 << 1) /* Start Interrupt (read / write 1 clear) */
#define U2DMACSR_BUSERRINTR (1 << 0) /* Bus Error Interrupt (read / write 1 clear) */
int i;
for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
- if (!strcmp(gpio_keys_button[i].desc, "on/off button"))
+ if (!strcmp(gpio_keys_button[i].desc, "on_off button"))
gpio_keys_button[i].active_low = 1;
}
gpio_direction_output(GPIO_W2W_PDN, 0);
/* this can be used to switch off the device */
- ret = gpio_request(GPIO_SHUTDOWN_SUPPLY,
- "supply shutdown");
+ ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
if (ret < 0)
pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
else
.type = EV_PWR,
.code = KEY_SUSPEND,
.gpio = SPITZ_GPIO_ON_KEY,
- .desc = "On/Off",
+ .desc = "On Off",
.wakeup = 1,
},
/* Two buttons detecting the lid state */
#include <linux/pm.h>
#include <linux/sched.h>
#include <linux/gpio.h>
+#include <linux/jiffies.h>
#include <linux/i2c-gpio.h>
#include <linux/serial_8250.h>
#include <linux/smc91x.h>
.sda_pin = VIPER_RTC_I2C_SDA_GPIO,
.scl_pin = VIPER_RTC_I2C_SCL_GPIO,
.udelay = 10,
- .timeout = 100,
+ .timeout = HZ,
};
static struct platform_device i2c_bus_device = {
.sda_pin = VIPER_TPM_I2C_SDA_GPIO,
.scl_pin = VIPER_TPM_I2C_SCL_GPIO,
.udelay = 10,
- .timeout = 100,
+ .timeout = HZ,
};
char *errstr;
else
mask = 2;
- return readl(REALVIEW_SYSMCI) & mask;
+ return !(readl(REALVIEW_SYSMCI) & mask);
}
struct mmci_platform_data realview_mmc0_plat_data = {
config SA1100_H3100
bool "Compaq iPAQ H3100"
select HTC_EGPIO
- select CPU_FREQ_SA1100
+ select CPU_FREQ_SA1110
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the
config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
select HTC_EGPIO
- select CPU_FREQ_SA1100
+ select CPU_FREQ_SA1110
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the
struct sdram_params *sdram;
const char *name = sdram_name;
+ if (!cpu_is_sa1110())
+ return -ENODEV;
+
if (!name[0]) {
if (machine_is_assabet())
name = "TC59SM716-CL3";
THUMB( "1: "ins" %1, [%2]\n" ) \
THUMB( " add %2, %2, #1\n" ) \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, #1\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous\n" \
+ " .popsection\n" \
: "=r" (err), "=&r" (val), "=r" (addr) \
: "0" (err), "2" (addr))
" mov %1, %1, "NEXT_BYTE"\n" \
"2: "ins" %1, [%2]\n" \
"3:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"4: mov %0, #1\n" \
" b 3b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 4b\n" \
" .long 2b, 4b\n" \
- " .previous\n" \
+ " .popsection\n" \
: "=r" (err), "=&r" (v), "=&r" (a) \
: "0" (err), "1" (v), "2" (a)); \
if (err) \
" mov %1, %1, "NEXT_BYTE"\n" \
"4: "ins" %1, [%2]\n" \
"5:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"6: mov %0, #1\n" \
" b 5b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 6b\n" \
" .long 2b, 6b\n" \
" .long 3b, 6b\n" \
" .long 4b, 6b\n" \
- " .previous\n" \
+ " .popsection\n" \
: "=r" (err), "=&r" (v), "=&r" (a) \
: "0" (err), "1" (v), "2" (a)); \
if (err) \
printk("Mem-info:\n");
show_free_areas();
for_each_online_node(node) {
- pg_data_t *n = NODE_DATA(node);
- struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn;
-
for_each_nodebank (i,mi,node) {
struct membank *bank = &mi->bank[i];
unsigned int pfn1, pfn2;
pfn1 = bank_pfn_start(bank);
pfn2 = bank_pfn_end(bank);
- page = map + pfn1;
- end = map + pfn2;
+ page = pfn_to_page(pfn1);
+ end = pfn_to_page(pfn2 - 1) + 1;
do {
total++;
reserved_pages = free_pages = 0;
for_each_online_node(node) {
- pg_data_t *n = NODE_DATA(node);
- struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn;
-
for_each_nodebank(i, &meminfo, node) {
struct membank *bank = &meminfo.bank[i];
unsigned int pfn1, pfn2;
pfn1 = bank_pfn_start(bank);
pfn2 = bank_pfn_end(bank);
- page = map + pfn1;
- end = map + pfn2;
+ page = pfn_to_page(pfn1);
+ end = pfn_to_page(pfn2 - 1) + 1;
do {
if (PageReserved(page))
mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland
mov pc, lr
- .previous
+ .section .text
/*
* cpu_sa1100_proc_fin()
@ to fault. Emit the appropriate exception gunk to fix things up.
@ ??? For some reason, faults can happen at .Lx2 even with a
@ plain LDR instruction. Weird, but it seems harmless.
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 2
.Lfix: mov pc, r9 @ let the user eat segfaults
- .previous
+ .popsection
- .section __ex_table,"a"
+ .pushsection __ex_table,"a"
.align 3
.long .Lx1, .Lfix
- .previous
+ .popsection
#define NO_LENGTH_CHECK 0xffffffff
-unsigned char omap_bootloader_tag[512];
-int omap_bootloader_tag_len;
-
struct omap_board_config_kernel *omap_board_config;
int omap_board_config_size;
#include <linux/clocksource.h>
+/*
+ * offset_32k holds the init time counter value. It is then subtracted
+ * from every counter read to achieve a counter that counts time from the
+ * kernel boot (needed for sched_clock()).
+ */
+static u32 offset_32k __read_mostly;
+
#ifdef CONFIG_ARCH_OMAP16XX
static cycle_t omap16xx_32k_read(struct clocksource *cs)
{
- return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED);
+ return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k;
}
#else
#define omap16xx_32k_read NULL
#ifdef CONFIG_ARCH_OMAP2420
static cycle_t omap2420_32k_read(struct clocksource *cs)
{
- return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10);
+ return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap2420_32k_read NULL
#ifdef CONFIG_ARCH_OMAP2430
static cycle_t omap2430_32k_read(struct clocksource *cs)
{
- return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10);
+ return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap2430_32k_read NULL
#ifdef CONFIG_ARCH_OMAP3
static cycle_t omap34xx_32k_read(struct clocksource *cs)
{
- return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
+ return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap34xx_32k_read NULL
#ifdef CONFIG_ARCH_OMAP4
static cycle_t omap44xx_32k_read(struct clocksource *cs)
{
- return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
+ return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap44xx_32k_read NULL
clocksource_32k.mult = clocksource_hz2mult(32768,
clocksource_32k.shift);
+ offset_32k = clocksource_32k.read(&clocksource_32k);
+
if (clocksource_register(&clocksource_32k))
printk(err, clocksource_32k.name);
}
{
u32 l;
+ /*
+ * The CPC/CDAC register needs to be initialized to zero
+ * before starting dma transfer.
+ */
+ if (cpu_is_omap15xx())
+ dma_write(0, CPC(lch));
+ else
+ dma_write(0, CDAC(lch));
+
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch;
char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_INT_EDGE;
l = __raw_readl(reg);
- if (trigger & IRQ_TYPE_EDGE_BOTH)
+ if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_CONTROL;
l = __raw_readl(reg);
- if (trigger & IRQ_TYPE_EDGE_BOTH)
+ if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
case METHOD_GPIO_7XX:
reg += OMAP7XX_GPIO_INT_CONTROL;
l = __raw_readl(reg);
- if (trigger & IRQ_TYPE_EDGE_BOTH)
+ if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
#define INT_34XX_MMC3_IRQ 94
#define INT_34XX_GPT12_IRQ 95
-#define INT_34XX_BENCH_MPU_EMUL 3
-
#define INT_35XX_HECC0_IRQ 24
#define INT_35XX_HECC1_IRQ 28
#define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67
#define OMAP44XX_MCBSP1_BASE 0x49022000
#define OMAP44XX_MCBSP2_BASE 0x49024000
#define OMAP44XX_MCBSP3_BASE 0x49026000
-#define OMAP44XX_MCBSP4_BASE 0x48074000
+#define OMAP44XX_MCBSP4_BASE 0x48096000
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
/* size (4 KiB) for IO mapping */
#define NAND_IO_SIZE SZ_4K
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
extern int gpmc_nand_init(struct omap_nand_platform_data *d);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
+{
+ return 0;
+}
+#endif
#define OMAP4430_PRM_BASE 0x4a306000
#define OMAP44XX_GPMC_BASE 0x50000000
#define OMAP443X_SCM_BASE 0x4a002000
-#define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE
+#define OMAP443X_CTRL_BASE 0x4a100000
#define OMAP44XX_IC_BASE 0x48200000
#define OMAP44XX_IVA_INTC_BASE 0x40000000
#define IRQ_SIR_IRQ 0x0040
u16 rev_offs;
u16 sysc_offs;
u16 syss_offs;
+ u16 sysc_flags;
u8 idlemodes;
- u8 sysc_flags;
u8 clockact;
struct omap_hwmod_sysc_fields *sysc_fields;
};
struct omap_musb_board_data {
u8 interface_type;
u8 mode;
- u8 power;
+ u16 power;
};
enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
GFP_KERNEL);
- if (!dbgfs_state)
+ if (!dbgfs_chan)
goto err_alloc;
chandir = debugfs_create_dir("channels", dbgfs_root);
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Sat Mar 20 15:35:41 2010
+# Last update: Sat May 1 10:36:42 2010
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
h6053 MACH_H6053 H6053 2762
smint01 MACH_SMINT01 SMINT01 2763
prtlvt2 MACH_PRTLVT2 PRTLVT2 2764
+ap420 MACH_AP420 AP420 2765
+htcshift MACH_HTCSHIFT HTCSHIFT 2766
+davinci_dm365_fc MACH_DAVINCI_DM365_FC DAVINCI_DM365_FC 2767
+msm8x55_surf MACH_MSM8X55_SURF MSM8X55_SURF 2768
+msm8x55_ffa MACH_MSM8X55_FFA MSM8X55_FFA 2769
+esl_vamana MACH_ESL_VAMANA ESL_VAMANA 2770
+sbc35 MACH_SBC35 SBC35 2771
+mpx6446 MACH_MPX6446 MPX6446 2772
+oreo_controller MACH_OREO_CONTROLLER OREO_CONTROLLER 2773
+kopin_models MACH_KOPIN_MODELS KOPIN_MODELS 2774
+ttc_vision2 MACH_TTC_VISION2 TTC_VISION2 2775
+cns3420vb MACH_CNS3420VB CNS3420VB 2776
+lpc2 MACH_LPC2 LPC2 2777
+olympus MACH_OLYMPUS OLYMPUS 2778
+vortex MACH_VORTEX VORTEX 2779
+s5pc200 MACH_S5PC200 S5PC200 2780
+ecucore_9263 MACH_ECUCORE_9263 ECUCORE_9263 2781
+smdkc200 MACH_SMDKC200 SMDKC200 2782
+emsiso_sx27 MACH_EMSISO_SX27 EMSISO_SX27 2783
+apx_som9g45_ek MACH_APX_SOM9G45_EK APX_SOM9G45_EK 2784
+songshan MACH_SONGSHAN SONGSHAN 2785
+tianshan MACH_TIANSHAN TIANSHAN 2786
+vpx500 MACH_VPX500 VPX500 2787
+am3517sam MACH_AM3517SAM AM3517SAM 2788
+skat91_sim508 MACH_SKAT91_SIM508 SKAT91_SIM508 2789
+skat91_s3e MACH_SKAT91_S3E SKAT91_S3E 2790
+omap4_panda MACH_OMAP4_PANDA OMAP4_PANDA 2791
+df7220 MACH_DF7220 DF7220 2792
+nemini MACH_NEMINI NEMINI 2793
+t8200 MACH_T8200 T8200 2794
+apf51 MACH_APF51 APF51 2795
+dr_rc_unit MACH_DR_RC_UNIT DR_RC_UNIT 2796
+bordeaux MACH_BORDEAUX BORDEAUX 2797
+catania_b MACH_CATANIA_B CATANIA_B 2798
+mx51_ocean MACH_MX51_OCEAN MX51_OCEAN 2799
+ti8168evm MACH_TI8168EVM TI8168EVM 2800
+neocoreomap MACH_NEOCOREOMAP NEOCOREOMAP 2801
+withings_wbp MACH_WITHINGS_WBP WITHINGS_WBP 2802
+dbps MACH_DBPS DBPS 2803
+sbc9261 MACH_SBC9261 SBC9261 2804
+pcbfp0001 MACH_PCBFP0001 PCBFP0001 2805
+speedy MACH_SPEEDY SPEEDY 2806
+chrysaor MACH_CHRYSAOR CHRYSAOR 2807
+tango MACH_TANGO TANGO 2808
+synology_dsx11 MACH_SYNOLOGY_DSX11 SYNOLOGY_DSX11 2809
+hanlin_v3ext MACH_HANLIN_V3EXT HANLIN_V3EXT 2810
+hanlin_v5 MACH_HANLIN_V5 HANLIN_V5 2811
+hanlin_v3plus MACH_HANLIN_V3PLUS HANLIN_V3PLUS 2812
+iriver_story MACH_IRIVER_STORY IRIVER_STORY 2813
+irex_iliad MACH_IREX_ILIAD IREX_ILIAD 2814
+irex_dr1000 MACH_IREX_DR1000 IREX_DR1000 2815
+teton_bga MACH_TETON_BGA TETON_BGA 2816
+snapper9g45 MACH_SNAPPER9G45 SNAPPER9G45 2817
+tam3517 MACH_TAM3517 TAM3517 2818
+pdc100 MACH_PDC100 PDC100 2819
THREAD_SIZE - sizeof(struct pt_regs));
}
-static void user_enable_single_step(struct task_struct *tsk)
+void user_enable_single_step(struct task_struct *tsk)
{
pr_debug("user_enable_single_step: pid=%u, PC=0x%08lx, SR=0x%08lx\n",
tsk->pid, task_pt_regs(tsk)->pc, task_pt_regs(tsk)->sr);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Wed Feb 3 10:02:59 2010
+# Linux kernel version: 2.6.34-rc6
+# Thu May 6 11:22:14 2010
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_PCI is not set
-CONFIG_NO_DMA=y
CONFIG_DTC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Bus Options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
CONFIG_XILINX_EMACLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_HEART_BEAT is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Wed Feb 3 10:03:21 2010
+# Linux kernel version: 2.6.34-rc6
+# Thu May 6 11:25:12 2010
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_PCI is not set
-CONFIG_NO_DMA=y
CONFIG_DTC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# Advanced setup
#
+# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
+CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0x90000000
+CONFIG_TASK_SIZE=0x80000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Bus Options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_XILINX_EMACLITE is not set
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_HEART_BEAT is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
#include <asm/registers.h>
-#define L1_CACHE_SHIFT 2
+#define L1_CACHE_SHIFT 5
/* word-granular cache in microblaze */
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
#define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1)
#endif
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
+
#endif /* _ASM_MICROBLAZE_DMA_H */
void die(const char *str, struct pt_regs *fp, long err);
void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
-#ifdef CONFIG_MMU
-void __bug(const char *file, int line, void *data);
-int bad_trap(int trap_num, struct pt_regs *regs);
-int debug_trap(struct pt_regs *regs);
-#endif /* CONFIG_MMU */
-
#if defined(CONFIG_KGDB)
void (*debugger)(struct pt_regs *regs);
int (*debugger_bpt)(struct pt_regs *regs);
#ifdef CONFIG_MMU
-#define mm_ptov(addr) ((void *)__phys_to_virt(addr))
-#define mm_vtop(addr) ((unsigned long)__virt_to_phys(addr))
#define phys_to_virt(addr) ((void *)__phys_to_virt(addr))
#define virt_to_phys(addr) ((unsigned long)__virt_to_phys(addr))
#define virt_to_bus(addr) ((unsigned long)__virt_to_phys(addr))
#ifndef __ASSEMBLY__
+/* MS be sure that SLAB allocates aligned objects */
+#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+
#define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
#define PAGE_DOWN(addr) ((addr)&(~((PAGE_SIZE)-1)))
#endif /* CONFIG_MMU */
-# ifndef CONFIG_MMU
-# define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
-# define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
-# define free_user_page(page, addr) free_page(addr)
-# else /* CONFIG_MMU */
-extern void copy_page(void *to, void *from);
-# endif /* CONFIG_MMU */
-
+# define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
# define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE)
# define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE)
#define HAVE_PCI_LEGACY 1
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME) (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME) (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-
/* The PCI address space does equal the physical memory
* address space (no IOMMU). The IDE and SCSI device layers use
* this boolean for bounce buffer decisions.
#define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); })
#define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); })
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
- unsigned long address)
-{
- pte_t *pte;
- extern void *early_get_page(void);
- if (mem_init_done) {
- pte = (pte_t *)__get_free_page(GFP_KERNEL |
- __GFP_REPEAT | __GFP_ZERO);
- } else {
- pte = (pte_t *)early_get_page();
- if (pte)
- clear_page(pte);
- }
- return pte;
-}
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
static inline struct page *pte_alloc_one(struct mm_struct *mm,
unsigned long address)
git.openpandora.org / pandora-kernel.git / commitdiff