i2c-s3c2410: Use platform data for gpio configuration

Add a callback to set the gpio configuration for the
i2c device instead of a set include. This also allows
the remvoal of the machine gpio and hardware files.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index f5efece..0aa0142 100644 (file)
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -35,11 +35,9 @@
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-iic.h>
 #include <asm/plat-s3c/iic.h>
 
@@ -489,9 +487,6 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
                msleep(1);
        }
 
-       dev_dbg(i2c->dev, "timeout: GPEDAT is %08x\n",
-               __raw_readl(S3C2410_GPEDAT));
-
        return -ETIMEDOUT;
 }
 
@@ -783,12 +778,12 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 
        /* get the plafrom data */
 
-       pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent);
+       pdata = s3c24xx_i2c_get_platformdata(i2c->dev);
 
        /* inititalise the gpio */
 
-       s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
-       s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
+       if (pdata->cfg_gpio)
+               pdata->cfg_gpio(to_platform_device(i2c->dev));
 
        /* write slave address */