b43: LP-PHY: Update code for spec fixes, and fix a few typos

A few typos have been discovered in both the specs and the code.
This patch fixes them.

Also use lpphy_op_switch_channel consistently, and make all users
of it print its return value for easier debugging.

Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index cb6c18d..4d14102 100644 (file)
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -552,7 +552,7 @@ static void lpphy_2062_init(struct b43_wldev *dev)
        B43_WARN_ON(!(bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU));
        B43_WARN_ON(crystalfreq == 0);
 
        B43_WARN_ON(!(bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU));
        B43_WARN_ON(crystalfreq == 0);
 

-       if (crystalfreq >= 30000000) {
+       if (crystalfreq <= 30000000) {

                lpphy->pdiv = 1;
                b43_radio_mask(dev, B2062_S_RFPLL_CTL1, 0xFFFB);
        } else {
                lpphy->pdiv = 1;
                b43_radio_mask(dev, B2062_S_RFPLL_CTL1, 0xFFFB);
        } else {


@@ -560,14 +560,16 @@ static void lpphy_2062_init(struct b43_wldev *dev)
                b43_radio_set(dev, B2062_S_RFPLL_CTL1, 0x4);
        }
 
                b43_radio_set(dev, B2062_S_RFPLL_CTL1, 0x4);
        }
 

-       tmp = (800000000 * lpphy->pdiv + crystalfreq) /
-             (32000000 * lpphy->pdiv);
-       tmp = (tmp - 1) & 0xFF;
+       tmp = (((800000000 * lpphy->pdiv + crystalfreq) /
+             (2 * crystalfreq)) - 8) & 0xFF;
+       b43_radio_write(dev, B2062_S_RFPLL_CTL7, tmp);
+
+       tmp = (((100 * crystalfreq + 16000000 * lpphy->pdiv) /
+             (32000000 * lpphy->pdiv)) - 1) & 0xFF;

        b43_radio_write(dev, B2062_S_RFPLL_CTL18, tmp);
 
        b43_radio_write(dev, B2062_S_RFPLL_CTL18, tmp);
 

-       tmp = (2 * crystalfreq + 1000000 * lpphy->pdiv) /
-             (2000000 * lpphy->pdiv);
-       tmp = ((tmp & 0xFF) - 1) & 0xFFFF;
+       tmp = (((2 * crystalfreq + 1000000 * lpphy->pdiv) /
+             (2000000 * lpphy->pdiv)) - 1) & 0xFF;

        b43_radio_write(dev, B2062_S_RFPLL_CTL19, tmp);
 
        ref = (1000 * lpphy->pdiv + 2 * crystalfreq) / (2000 * lpphy->pdiv);
        b43_radio_write(dev, B2062_S_RFPLL_CTL19, tmp);
 
        ref = (1000 * lpphy->pdiv + 2 * crystalfreq) / (2000 * lpphy->pdiv);


@@ -671,7 +673,7 @@ static void lpphy_radio_init(struct b43_wldev *dev)
        b43_phy_mask(dev, B43_LPPHY_FOURWIRE_CTL, 0xFFFD);
        udelay(1);
 
        b43_phy_mask(dev, B43_LPPHY_FOURWIRE_CTL, 0xFFFD);
        udelay(1);
 

-       if (dev->phy.rev < 2) {
+       if (dev->phy.radio_ver == 0x2062) {

                lpphy_2062_init(dev);
        } else {
                lpphy_2063_init(dev);
                lpphy_2062_init(dev);
        } else {
                lpphy_2063_init(dev);


@@ -688,11 +690,18 @@ struct lpphy_iq_est { u32 iq_prod, i_pwr, q_pwr; };
 
 static void lpphy_set_rc_cap(struct b43_wldev *dev)
 {
 
 static void lpphy_set_rc_cap(struct b43_wldev *dev)
 {

-       u8 rc_cap = dev->phy.lp->rc_cap;
+       struct b43_phy_lp *lpphy = dev->phy.lp;
+
+       u8 rc_cap = (lpphy->rc_cap & 0x1F) >> 1;

 
 

-       b43_radio_write(dev, B2062_N_RXBB_CALIB2, max_t(u8, rc_cap-4, 0x80));
-       b43_radio_write(dev, B2062_N_TX_CTL_A, ((rc_cap & 0x1F) >> 1) | 0x80);
-       b43_radio_write(dev, B2062_S_RXG_CNT16, ((rc_cap & 0x1F) >> 2) | 0x80);
+       if (dev->phy.rev == 1) //FIXME check channel 14!
+               rc_cap = max_t(u8, rc_cap + 5, 15);
+
+       b43_radio_write(dev, B2062_N_RXBB_CALIB2,
+                       max_t(u8, lpphy->rc_cap - 4, 0x80));
+       b43_radio_write(dev, B2062_N_TX_CTL_A, rc_cap | 0x80);
+       b43_radio_write(dev, B2062_S_RXG_CNT16,
+                       ((lpphy->rc_cap & 0x1F) >> 2) | 0x80);

 }
 
 static u8 lpphy_get_bb_mult(struct b43_wldev *dev)
 }
 
 static u8 lpphy_get_bb_mult(struct b43_wldev *dev)


@@ -1101,6 +1110,9 @@ static void lpphy_set_tx_power_control(struct b43_wldev *dev,
        lpphy_write_tx_pctl_mode_to_hardware(dev);
 }
 
        lpphy_write_tx_pctl_mode_to_hardware(dev);
 }
 

+static int b43_lpphy_op_switch_channel(struct b43_wldev *dev,
+                                      unsigned int new_channel);
+

 static void lpphy_rev0_1_rc_calib(struct b43_wldev *dev)
 {
        struct b43_phy_lp *lpphy = dev->phy.lp;
 static void lpphy_rev0_1_rc_calib(struct b43_wldev *dev)
 {
        struct b43_phy_lp *lpphy = dev->phy.lp;


@@ -1118,11 +1130,16 @@ static void lpphy_rev0_1_rc_calib(struct b43_wldev *dev)
            old_rf2_ovr, old_rf2_ovrval, old_phy_ctl;
        enum b43_lpphy_txpctl_mode old_txpctl;
        u32 normal_pwr, ideal_pwr, mean_sq_pwr, tmp = 0, mean_sq_pwr_min = 0;
            old_rf2_ovr, old_rf2_ovrval, old_phy_ctl;
        enum b43_lpphy_txpctl_mode old_txpctl;
        u32 normal_pwr, ideal_pwr, mean_sq_pwr, tmp = 0, mean_sq_pwr_min = 0;

-       int loopback, i, j, inner_sum;
+       int loopback, i, j, inner_sum, err;

 
        memset(&iq_est, 0, sizeof(iq_est));
 
 
        memset(&iq_est, 0, sizeof(iq_est));
 

-       b43_switch_channel(dev, 7);
+       err = b43_lpphy_op_switch_channel(dev, 7);
+       if (err) {
+               b43dbg(dev->wl,
+                      "RC calib: Failed to switch to channel 7, error = %d",
+                      err);
+       }

        old_txg_ovr = (b43_phy_read(dev, B43_LPPHY_AFE_CTL_OVR) >> 6) & 1;
        old_bbmult = lpphy_get_bb_mult(dev);
        if (old_txg_ovr)
        old_txg_ovr = (b43_phy_read(dev, B43_LPPHY_AFE_CTL_OVR) >> 6) & 1;
        old_bbmult = lpphy_get_bb_mult(dev);
        if (old_txg_ovr)


@@ -1881,14 +1898,14 @@ static int lpphy_b2062_tune(struct b43_wldev *dev,
 {
        struct b43_phy_lp *lpphy = dev->phy.lp;
        struct ssb_bus *bus = dev->dev->bus;
 {
        struct b43_phy_lp *lpphy = dev->phy.lp;
        struct ssb_bus *bus = dev->dev->bus;

-       static const struct b206x_channel *chandata = NULL;
+       const struct b206x_channel *chandata = NULL;

        u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
        u32 tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7, tmp8, tmp9;
        int i, err = 0;
 
        u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
        u32 tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7, tmp8, tmp9;
        int i, err = 0;
 

-       for (i = 0; i < ARRAY_SIZE(b2063_chantbl); i++) {
-               if (b2063_chantbl[i].channel == channel) {
-                       chandata = &b2063_chantbl[i];
+       for (i = 0; i < ARRAY_SIZE(b2062_chantbl); i++) {
+               if (b2062_chantbl[i].channel == channel) {
+                       chandata = &b2062_chantbl[i];

                        break;
                }
        }
                        break;
                }
        }