* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
i2c-parport: Various cleanups
i2c-i801: Don't depend on other kernel driver config options
i2c-i801: Check for vendor Fujitsu before probing for apanel
i2c-i801: Don't probe for slaves on IDF channels
i2c-i801: SMBus patch for Intel Panther Point DeviceIDs
i2c/writing-clients: Fix foo_driver.id_table
* Intel 6 Series (PCH)
* Intel Patsburg (PCH)
* Intel DH89xxCC (PCH)
+ * Intel Panther Point (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
.name = "foo",
},
- .id_table = foo_ids,
+ .id_table = foo_idtable,
.probe = foo_probe,
.remove = foo_remove,
/* if device autodetection is needed: */
config I2C_I801
tristate "Intel 82801 (ICH/PCH)"
depends on PCI
+ select CHECK_SIGNATURE if X86 && DMI
help
If you say yes to this option, support will be included for the Intel
801 family of mainboard I2C interfaces. Specifically, the following
6 Series (PCH)
Patsburg (PCH)
DH89xxCC (PCH)
+ Panther Point (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes
Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes
DH89xxCC (PCH) 0x2330 32 hard yes yes yes
+ Panther Point (PCH) 0x1e22 32 hard yes yes yes
Features supported by this driver:
Software PEC no
/* Older devices have their ID defined in <linux/pci_ids.h> */
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
-#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22
/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22
#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
#define FEATURE_BLOCK_BUFFER (1 << 1)
#define FEATURE_BLOCK_PROC (1 << 2)
#define FEATURE_I2C_BLOCK_READ (1 << 3)
+/* Not really a feature, but it's convenient to handle it as such */
+#define FEATURE_IDF (1 << 15)
static const char *i801_feature_names[] = {
"SMBus PEC",
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, i801_ids);
-#if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE
+#if defined CONFIG_X86 && defined CONFIG_DMI
static unsigned char apanel_addr;
/* Scan the system ROM for the signature "FJKEYINF" */
}
iounmap(bios);
}
-#else
-static void __init input_apanel_init(void) {}
-#endif
-#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
struct dmi_onboard_device_info {
const char *name;
u8 type;
dmi_check_onboard_device(type, name, adap);
}
}
-#endif
+
+/* Register optional slaves */
+static void __devinit i801_probe_optional_slaves(struct i801_priv *priv)
+{
+ /* Only register slaves on main SMBus channel */
+ if (priv->features & FEATURE_IDF)
+ return;
+
+ if (apanel_addr) {
+ struct i2c_board_info info;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = apanel_addr;
+ strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
+ i2c_new_device(&priv->adapter, &info);
+ }
+
+ if (dmi_name_in_vendors("FUJITSU"))
+ dmi_walk(dmi_check_onboard_devices, &priv->adapter);
+}
+#else
+static void __init input_apanel_init(void) {}
+static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) {}
+#endif /* CONFIG_X86 && CONFIG_DMI */
static int __devinit i801_probe(struct pci_dev *dev,
const struct pci_device_id *id)
priv->pci_dev = dev;
switch (dev->device) {
+ case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0:
+ case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1:
+ case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2:
+ priv->features |= FEATURE_IDF;
+ /* fall through */
default:
priv->features |= FEATURE_I2C_BLOCK_READ;
/* fall through */
goto exit_release;
}
- /* Register optional slaves */
-#if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE
- if (apanel_addr) {
- struct i2c_board_info info;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = apanel_addr;
- strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
- i2c_new_device(&priv->adapter, &info);
- }
-#endif
-#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
- if (dmi_name_in_vendors("FUJITSU"))
- dmi_walk(dmi_check_onboard_devices, &priv->adapter);
-#endif
+ i801_probe_optional_slaves(priv);
pci_set_drvdata(dev, priv);
return 0;
static int __init i2c_i801_init(void)
{
- input_apanel_init();
+ if (dmi_name_in_vendors("FUJITSU"))
+ input_apanel_init();
return pci_register_driver(&i801_driver);
}
* i2c-parport-light.c I2C bus over parallel port *
* ------------------------------------------------------------------------ *
Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org>
-
+
Based on older i2c-velleman.c driver
Copyright (C) 1995-2000 Simon G. Vogl
With some changes from:
Frodo Looijaard <frodol@dds.nl>
Kyösti Mälkki <kmalkki@cc.hut.fi>
-
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
.getscl = parport_getscl,
.udelay = 50,
.timeout = HZ,
-};
+};
/* ----- Driver registration ---------------------------------------------- */
static struct i2c_client *ara;
static struct lineop parport_ctrl_irq = {
.val = (1 << 4),
- .port = CTRL,
+ .port = PORT_CTRL,
};
static int __devinit i2c_parport_probe(struct platform_device *pdev)
if (irq != 0)
pr_info(DRVNAME ": using irq %d\n", irq);
- if (!adapter_parm[type].getscl.val)
+ if (!adapter_parm[type].getscl.val)
parport_algo_data.getscl = NULL;
/* Sets global pdev as a side effect */
* i2c-parport.c I2C bus over parallel port *
* ------------------------------------------------------------------------ *
Copyright (C) 2003-2011 Jean Delvare <khali@linux-fr.org>
-
+
Based on older i2c-philips-par.c driver
Copyright (C) 1995-2000 Simon G. Vogl
With some changes from:
Frodo Looijaard <frodol@dds.nl>
Kyösti Mälkki <kmalkki@cc.hut.fi>
-
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
return parport_read_control(p);
}
-static void (*port_write[])(struct parport *, unsigned char) = {
+static void (* const port_write[])(struct parport *, unsigned char) = {
port_write_data,
NULL,
port_write_control,
};
-static unsigned char (*port_read[])(struct parport *) = {
+static unsigned char (* const port_read[])(struct parport *) = {
port_read_data,
port_read_status,
port_read_control,
.getscl = parport_getscl,
.udelay = 10, /* ~50 kbps */
.timeout = HZ,
-};
+};
/* ----- I2c and parallel port call-back functions and structures --------- */
"SMBus alert received but no ARA client!\n");
}
-static void i2c_parport_attach (struct parport *port)
+static void i2c_parport_attach(struct parport *port)
{
struct i2c_par *adapter;
-
+
adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL);
if (adapter == NULL) {
printk(KERN_ERR "i2c-parport: Failed to kzalloc\n");
NULL, NULL, i2c_parport_irq, PARPORT_FLAG_EXCL, adapter);
if (!adapter->pdev) {
printk(KERN_ERR "i2c-parport: Unable to register with parport\n");
- goto ERROR0;
+ goto err_free;
}
/* Fill the rest of the structure */
if (parport_claim_or_block(adapter->pdev) < 0) {
printk(KERN_ERR "i2c-parport: Could not claim parallel port\n");
- goto ERROR1;
+ goto err_unregister;
}
/* Reset hardware to a sane state (SCL and SDA high) */
if (i2c_bit_add_bus(&adapter->adapter) < 0) {
printk(KERN_ERR "i2c-parport: Unable to register with I2C\n");
- goto ERROR1;
+ goto err_unregister;
}
/* Setup SMBus alert if supported */
mutex_lock(&adapter_list_lock);
list_add_tail(&adapter->node, &adapter_list);
mutex_unlock(&adapter_list_lock);
- return;
+ return;
-ERROR1:
+ err_unregister:
parport_release(adapter->pdev);
parport_unregister_device(adapter->pdev);
-ERROR0:
+ err_free:
kfree(adapter);
}
-static void i2c_parport_detach (struct parport *port)
+static void i2c_parport_detach(struct parport *port)
{
struct i2c_par *adapter, *_n;
/* Un-init if needed (power off...) */
if (adapter_parm[type].init.val)
line_set(port, 0, &adapter_parm[type].init);
-
+
parport_release(adapter->pdev);
parport_unregister_device(adapter->pdev);
list_del(&adapter->node);
* i2c-parport.h I2C bus over parallel port *
* ------------------------------------------------------------------------ *
Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org>
-
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
-#ifdef DATA
-#undef DATA
-#endif
-
-#define DATA 0
-#define STAT 1
-#define CTRL 2
+#define PORT_DATA 0
+#define PORT_STAT 1
+#define PORT_CTRL 2
struct lineop {
u8 val;
unsigned int smbus_alert:1;
};
-static struct adapter_parm adapter_parm[] = {
+static const struct adapter_parm adapter_parm[] = {
/* type 0: Philips adapter */
{
- .setsda = { 0x80, DATA, 1 },
- .setscl = { 0x08, CTRL, 0 },
- .getsda = { 0x80, STAT, 0 },
- .getscl = { 0x08, STAT, 0 },
+ .setsda = { 0x80, PORT_DATA, 1 },
+ .setscl = { 0x08, PORT_CTRL, 0 },
+ .getsda = { 0x80, PORT_STAT, 0 },
+ .getscl = { 0x08, PORT_STAT, 0 },
},
/* type 1: home brew teletext adapter */
{
- .setsda = { 0x02, DATA, 0 },
- .setscl = { 0x01, DATA, 0 },
- .getsda = { 0x80, STAT, 1 },
+ .setsda = { 0x02, PORT_DATA, 0 },
+ .setscl = { 0x01, PORT_DATA, 0 },
+ .getsda = { 0x80, PORT_STAT, 1 },
},
/* type 2: Velleman K8000 adapter */
{
- .setsda = { 0x02, CTRL, 1 },
- .setscl = { 0x08, CTRL, 1 },
- .getsda = { 0x10, STAT, 0 },
+ .setsda = { 0x02, PORT_CTRL, 1 },
+ .setscl = { 0x08, PORT_CTRL, 1 },
+ .getsda = { 0x10, PORT_STAT, 0 },
},
/* type 3: ELV adapter */
{
- .setsda = { 0x02, DATA, 1 },
- .setscl = { 0x01, DATA, 1 },
- .getsda = { 0x40, STAT, 1 },
- .getscl = { 0x08, STAT, 1 },
+ .setsda = { 0x02, PORT_DATA, 1 },
+ .setscl = { 0x01, PORT_DATA, 1 },
+ .getsda = { 0x40, PORT_STAT, 1 },
+ .getscl = { 0x08, PORT_STAT, 1 },
},
/* type 4: ADM1032 evaluation board */
{
- .setsda = { 0x02, DATA, 1 },
- .setscl = { 0x01, DATA, 1 },
- .getsda = { 0x10, STAT, 1 },
- .init = { 0xf0, DATA, 0 },
+ .setsda = { 0x02, PORT_DATA, 1 },
+ .setscl = { 0x01, PORT_DATA, 1 },
+ .getsda = { 0x10, PORT_STAT, 1 },
+ .init = { 0xf0, PORT_DATA, 0 },
.smbus_alert = 1,
},
/* type 5: ADM1025, ADM1030 and ADM1031 evaluation boards */
{
- .setsda = { 0x02, DATA, 1 },
- .setscl = { 0x01, DATA, 1 },
- .getsda = { 0x10, STAT, 1 },
+ .setsda = { 0x02, PORT_DATA, 1 },
+ .setscl = { 0x01, PORT_DATA, 1 },
+ .getsda = { 0x10, PORT_STAT, 1 },
},
/* type 6: Barco LPT->DVI (K5800236) adapter */
{
- .setsda = { 0x02, DATA, 1 },
- .setscl = { 0x01, DATA, 1 },
- .getsda = { 0x20, STAT, 0 },
- .getscl = { 0x40, STAT, 0 },
- .init = { 0xfc, DATA, 0 },
+ .setsda = { 0x02, PORT_DATA, 1 },
+ .setscl = { 0x01, PORT_DATA, 1 },
+ .getsda = { 0x20, PORT_STAT, 0 },
+ .getscl = { 0x40, PORT_STAT, 0 },
+ .init = { 0xfc, PORT_DATA, 0 },
},
/* type 7: One For All JP1 parallel port adapter */
{
- .setsda = { 0x01, DATA, 0 },
- .setscl = { 0x02, DATA, 0 },
- .getsda = { 0x80, STAT, 1 },
- .init = { 0x04, DATA, 1 },
+ .setsda = { 0x01, PORT_DATA, 0 },
+ .setscl = { 0x02, PORT_DATA, 0 },
+ .getsda = { 0x80, PORT_STAT, 1 },
+ .init = { 0x04, PORT_DATA, 1 },
},
};
git.openpandora.org / pandora-kernel.git / commitdiff