* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (38 commits)
Revert "staging: tidspbridge: replace iommu custom for opensource implementation"
Revert "staging: tidspbridge - move shared memory iommu maps to tiomap3430.c"
Revert "staging: tidspbridge - rename bridge_brd_mem_map/unmap to a proper name"
Revert "staging: tidspbridge - remove custom mmu code from tiomap3430.c"
Revert "staging: tidspbridge - fix mmufault support"
Revert "staging: tidspbridge - remove hw directory"
Revert "staging: tidspbridge - move all iommu related code to a new file"
Revert "staging: tidspbridge: remove dw_dmmu_base from cfg_hostres struct"
Revert "staging: tidspbridge - remove reserved memory clean up"
Revert "staging: tidspbridge - deprecate reserve/unreserve_memory funtions"
Revert "staging: tidspbridge - remove dmm custom module"
Revert "staging: tidspbridge - update Kconfig to select IOMMU module"
staging: tidspbridge: hardcode SCM macros while fix is upstreamed
Staging: keucr driver: fix uninitialized variable & proper memset length
omap: dsp: remove shm from normal memory
Staging: wlan-ng: Fix wrong #ifdef #endif sequence
Staging: Update parameters for cfg80211 key management operation
Staging: ath6kl: Fix pointer casts on 64-bit architectures
Staging: batman-adv: suppress false warning when changing the mac address
Staging: batman-adv: fix interface alternating and bonding reggression
...
--- /dev/null
+What: /proc/<pid>/oom_adj
+When: August 2012
+Why: /proc/<pid>/oom_adj allows userspace to influence the oom killer's
+ badness heuristic used to determine which task to kill when the kernel
+ is out of memory.
+
+ The badness heuristic has since been rewritten since the introduction of
+ this tunable such that its meaning is deprecated. The value was
+ implemented as a bitshift on a score generated by the badness()
+ function that did not have any precise units of measure. With the
+ rewrite, the score is given as a proportion of available memory to the
+ task allocating pages, so using a bitshift which grows the score
+ exponentially is, thus, impossible to tune with fine granularity.
+
+ A much more powerful interface, /proc/<pid>/oom_score_adj, was
+ introduced with the oom killer rewrite that allows users to increase or
+ decrease the badness() score linearly. This interface will replace
+ /proc/<pid>/oom_adj.
+
+ A warning will be emitted to the kernel log if an application uses this
+ deprecated interface. After it is printed once, future warnings will be
+ suppressed until the kernel is rebooted.
As of the Linux 2.6.10 kernel, it is now possible to change the
IO scheduler for a given block device on the fly (thus making it possible,
for instance, to set the CFQ scheduler for the system default, but
-set a specific device to use the anticipatory or noop schedulers - which
+set a specific device to use the deadline or noop schedulers - which
can improve that device's throughput).
To set a specific scheduler, simply do this:
will be displayed, with the currently selected scheduler in brackets:
# cat /sys/block/hda/queue/scheduler
-noop anticipatory deadline [cfq]
-# echo anticipatory > /sys/block/hda/queue/scheduler
+noop deadline [cfq]
+# echo deadline > /sys/block/hda/queue/scheduler
# cat /sys/block/hda/queue/scheduler
-noop [anticipatory] deadline cfq
+noop [deadline] cfq
Roadmap:
-2.6.37 Remove experimental tag from mount option
- => should be roughly 6 months after initial merge
- => enough time to:
- => gain confidence and fix problems reported by early
- adopters (a.k.a. guinea pigs)
- => address worst performance regressions and undesired
- behaviours
- => start tuning/optimising code for parallelism
- => start tuning/optimising algorithms consuming
- excessive CPU time
-
2.6.39 Switch default mount option to use delayed logging
=> should be roughly 12 months after initial merge
=> enough time to shake out remaining problems before next round of
arch/x86/kernel/cpu/cpufreq/elanfreq.c.
elevator= [IOSCHED]
- Format: {"anticipatory" | "cfq" | "deadline" | "noop"}
+ Format: {"cfq" | "deadline" | "noop"}
See Documentation/block/as-iosched.txt and
Documentation/block/deadline-iosched.txt for details.
Some LEDs can be programmed to blink without any CPU interaction. To
support this feature, a LED driver can optionally implement the
-blink_set() function (see <linux/leds.h>). If implemented, triggers can
-attempt to use it before falling back to software timers. The blink_set()
-function should return 0 if the blink setting is supported, or -EINVAL
-otherwise, which means that LED blinking will be handled by software.
-
-The blink_set() function should choose a user friendly blinking
-value if it is called with *delay_on==0 && *delay_off==0 parameters. In
-this case the driver should give back the chosen value through delay_on
-and delay_off parameters to the leds subsystem.
+blink_set() function (see <linux/leds.h>). To set an LED to blinking,
+however, it is better to use use the API function led_blink_set(),
+as it will check and implement software fallback if necessary.
+
+To turn off blinking again, use the API function led_brightness_set()
+as that will not just set the LED brightness but also stop any software
+timers that may have been required for blinking.
+
+The blink_set() function should choose a user friendly blinking value
+if it is called with *delay_on==0 && *delay_off==0 parameters. In this
+case the driver should give back the chosen value through delay_on and
+delay_off parameters to the leds subsystem.
Setting the brightness to zero with brightness_set() callback function
should completely turn off the LED and cancel the previously programmed
--- /dev/null
+Kernel driver for lp5521
+========================
+
+* National Semiconductor LP5521 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5521.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+
+LP5521 can drive up to 3 channels. Leds can be controlled directly via
+the led class control interface. Channels have generic names:
+lp5521:channelx, where x is 0 .. 2
+
+All three channels can be also controlled using the engine micro programs.
+More details of the instructions can be found from the public data sheet.
+
+Control interface for the engines:
+x is 1 .. 3
+enginex_mode : disabled, load, run
+enginex_load : store program (visible only in engine load mode)
+
+Example (start to blink the channel 2 led):
+cd /sys/class/leds/lp5521:channel2/device
+echo "load" > engine3_mode
+echo "037f4d0003ff6000" > engine3_load
+echo "run" > engine3_mode
+
+stop the engine:
+echo "disabled" > engine3_mode
+
+sysfs contains a selftest entry.
+The test communicates with the chip and checks that
+the clock mode is automatically set to the requested one.
+
+Each channel has its own led current settings.
+/sys/class/leds/lp5521:channel0/led_current - RW
+/sys/class/leds/lp5521:channel0/max_current - RO
+Format: 10x mA i.e 10 means 1.0 mA
+
+example platform data:
+
+Note: chan_nr can have values between 0 and 2.
+
+static struct lp5521_led_config lp5521_led_config[] = {
+ {
+ .chan_nr = 0,
+ .led_current = 50,
+ .max_current = 130,
+ }, {
+ .chan_nr = 1,
+ .led_current = 0,
+ .max_current = 130,
+ }, {
+ .chan_nr = 2,
+ .led_current = 0,
+ .max_current = 130,
+ }
+};
+
+static int lp5521_setup(void)
+{
+ /* setup HW resources */
+}
+
+static void lp5521_release(void)
+{
+ /* Release HW resources */
+}
+
+static void lp5521_enable(bool state)
+{
+ /* Control of chip enable signal */
+}
+
+static struct lp5521_platform_data lp5521_platform_data = {
+ .led_config = lp5521_led_config,
+ .num_channels = ARRAY_SIZE(lp5521_led_config),
+ .clock_mode = LP5521_CLOCK_EXT,
+ .setup_resources = lp5521_setup,
+ .release_resources = lp5521_release,
+ .enable = lp5521_enable,
+};
+
+If the current is set to 0 in the platform data, that channel is
+disabled and it is not visible in the sysfs.
--- /dev/null
+Kernel driver for lp5523
+========================
+
+* National Semiconductor LP5523 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5523.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+LP5523 can drive up to 9 channels. Leds can be controlled directly via
+the led class control interface. Channels have generic names:
+lp5523:channelx where x is 0...8
+
+The chip provides 3 engines. Each engine can control channels without
+interaction from the main CPU. Details of the micro engine code can be found
+from the public data sheet. Leds can be muxed to different channels.
+
+Control interface for the engines:
+x is 1 .. 3
+enginex_mode : disabled, load, run
+enginex_load : microcode load (visible only in load mode)
+enginex_leds : led mux control (visible only in load mode)
+
+cd /sys/class/leds/lp5523:channel2/device
+echo "load" > engine3_mode
+echo "9d80400004ff05ff437f0000" > engine3_load
+echo "111111111" > engine3_leds
+echo "run" > engine3_mode
+
+sysfs contains a selftest entry. It measures each channel
+voltage level and checks if it looks reasonable. If the level is too high,
+the led is missing; if the level is too low, there is a short circuit.
+
+Selftest uses always the current from the platform data.
+
+Each channel contains led current settings.
+/sys/class/leds/lp5523:channel2/led_current - RW
+/sys/class/leds/lp5523:channel2/max_current - RO
+Format: 10x mA i.e 10 means 1.0 mA
+
+Example platform data:
+
+Note - chan_nr can have values between 0 and 8.
+
+static struct lp5523_led_config lp5523_led_config[] = {
+ {
+ .chan_nr = 0,
+ .led_current = 50,
+ .max_current = 130,
+ },
+...
+ }, {
+ .chan_nr = 8,
+ .led_current = 50,
+ .max_current = 130,
+ }
+};
+
+static int lp5523_setup(void)
+{
+ /* Setup HW resources */
+}
+
+static void lp5523_release(void)
+{
+ /* Release HW resources */
+}
+
+static void lp5523_enable(bool state)
+{
+ /* Control chip enable signal */
+}
+
+static struct lp5523_platform_data lp5523_platform_data = {
+ .led_config = lp5523_led_config,
+ .num_channels = ARRAY_SIZE(lp5523_led_config),
+ .clock_mode = LP5523_CLOCK_EXT,
+ .setup_resources = lp5523_setup,
+ .release_resources = lp5523_release,
+ .enable = lp5523_enable,
+};
To quote Linux Weekly News:
There are a number of red-black trees in use in the kernel.
- The anticipatory, deadline, and CFQ I/O schedulers all employ
- rbtrees to track requests; the packet CD/DVD driver does the same.
+ The deadline and CFQ I/O schedulers employ rbtrees to
+ track requests; the packet CD/DVD driver does the same.
The high-resolution timer code uses an rbtree to organize outstanding
timer requests. The ext3 filesystem tracks directory entries in a
red-black tree. Virtual memory areas (VMAs) are tracked with red-black
- core_uses_pid
- ctrl-alt-del
- dentry-state
+- dmesg_restrict
- domainname
- hostname
- hotplug
==============================================================
+dmesg_restrict:
+
+This toggle indicates whether unprivileged users are prevented from using
+dmesg(8) to view messages from the kernel's log buffer. When
+dmesg_restrict is set to (0) there are no restrictions. When
+dmesg_restrict is set set to (1), users must have CAP_SYS_ADMIN to use
+dmesg(8).
+
+The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the default
+value of dmesg_restrict.
+
+==============================================================
+
domainname & hostname:
These files can be used to set the NIS/YP domainname and the
L: linux-serial@vger.kernel.org
W: http://serial.sourceforge.net
S: Maintained
-T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
F: drivers/serial/8250*
F: include/linux/serial_8250.h
TTY LAYER
M: Greg Kroah-Hartman <gregkh@suse.de>
S: Maintained
-T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
F: drivers/char/tty_*
F: drivers/serial/serial_core.c
F: include/linux/serial_core.h
M: Greg Kroah-Hartman <gregkh@suse.de>
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org
-T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
S: Supported
F: Documentation/usb/
F: drivers/net/usb/
XEN PCI SUBSYSTEM
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L: xen-devel@lists.xensource.com
+L: xen-devel@lists.xensource.com (moderated for non-subscribers)
S: Supported
F: arch/x86/pci/*xen*
F: drivers/pci/*xen*
XEN SWIOTLB SUBSYSTEM
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L: xen-devel@lists.xensource.com
+L: xen-devel@lists.xensource.com (moderated for non-subscribers)
S: Supported
F: arch/x86/xen/*swiotlb*
F: drivers/xen/*swiotlb*
XEN HYPERVISOR INTERFACE
M: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L: xen-devel@lists.xen.org
+L: xen-devel@lists.xensource.com (moderated for non-subscribers)
L: virtualization@lists.osdl.org
S: Supported
F: arch/x86/xen/
select HAVE_MEMBLOCK
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
- select GENERIC_ATOMIC64 if (!CPU_32v6K)
+ select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
/*
- * Set priority on all interrupts.
+ * Set priority on all global interrupts.
*/
- for (i = 0; i < max_irq; i += 4)
+ for (i = 32; i < max_irq; i += 4)
writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
/*
- * Disable all interrupts.
+ * Disable all interrupts. Leave the PPI and SGIs alone
+ * as these enables are banked registers.
*/
- for (i = 0; i < max_irq; i += 32)
+ for (i = 32; i < max_irq; i += 32)
writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
/*
void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
{
+ void __iomem *dist_base;
+ int i;
+
if (gic_nr >= MAX_GIC_NR)
BUG();
+ dist_base = gic_data[gic_nr].dist_base;
+ BUG_ON(!dist_base);
+
gic_data[gic_nr].cpu_base = base;
+ /*
+ * Deal with the banked PPI and SGI interrupts - disable all
+ * PPI interrupts, ensure all SGI interrupts are enabled.
+ */
+ writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
+ writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
+
+ /*
+ * Set priority on PPI and SGI interrupts
+ */
+ for (i = 0; i < 32; i += 4)
+ writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
+
writel(0xf0, base + GIC_CPU_PRIMASK);
writel(1, base + GIC_CPU_CTRL);
}
IT8152_PD_IRQ(1) USB (USBR)
IT8152_PD_IRQ(0) Audio controller (ACR)
*/
-#define IT8152_IRQ(x) (IRQ_BOARD_END + (x))
+#define IT8152_IRQ(x) (IRQ_BOARD_START + (x))
/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
#define IT8152_LD_IRQ_COUNT 9
breakpoint_handler(addr, regs);
break;
case ARM_ENTRY_ASYNC_WATCHPOINT:
- WARN_ON("Asynchronous watchpoint exception taken. "
- "Debugging results may be unreliable");
+ WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
case ARM_ENTRY_SYNC_WATCHPOINT:
watchpoint_handler(addr, regs);
break;
static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
enum armv7_counters counter)
{
- int ret;
+ int ret = 0;
if (counter == ARMV7_CYCLE_COUNTER)
ret = pmnc & ARMV7_FLAG_C;
/* only go to a higher address on the stack */
low = frame->sp;
- high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+ high = ALIGN(low, THREAD_SIZE);
/* check current frame pointer is within bounds */
if (fp < (low + 12) || fp + 4 >= high)
void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
{
#ifdef CONFIG_KALLSYMS
- char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
- sprint_symbol(sym1, where);
- sprint_symbol(sym2, from);
- printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
+ printk("[<%08lx>] (%pS) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from);
#else
printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
#endif
/* only go to a higher address on the stack */
low = frame->sp;
- high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+ high = ALIGN(low, THREAD_SIZE);
pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
frame->pc, frame->lr, frame->sp);
-/*
- * arch/arm/mach-ep93xx/include/mach/dma.h
+/**
+ * DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine
+ *
+ * The EP93xx DMA M2P subsystem handles DMA transfers between memory and
+ * peripherals. DMA M2P channels are available for audio, UARTs and IrDA.
+ * See chapter 10 of the EP93xx users guide for full details on the DMA M2P
+ * engine.
+ *
+ * See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code.
+ *
*/
#ifndef __ASM_ARCH_DMA_H
#include <linux/list.h>
#include <linux/types.h>
+/**
+ * struct ep93xx_dma_buffer - Information about a buffer to be transferred
+ * using the DMA M2P engine
+ *
+ * @list: Entry in DMA buffer list
+ * @bus_addr: Physical address of the buffer
+ * @size: Size of the buffer in bytes
+ */
struct ep93xx_dma_buffer {
struct list_head list;
u32 bus_addr;
u16 size;
};
+/**
+ * struct ep93xx_dma_m2p_client - Information about a DMA M2P client
+ *
+ * @name: Unique name for this client
+ * @flags: Client flags
+ * @cookie: User data to pass to callback functions
+ * @buffer_started: Non NULL function to call when a transfer is started.
+ * The arguments are the user data cookie and the DMA
+ * buffer which is starting.
+ * @buffer_finished: Non NULL function to call when a transfer is completed.
+ * The arguments are the user data cookie, the DMA buffer
+ * which has completed, and a boolean flag indicating if
+ * the transfer had an error.
+ */
struct ep93xx_dma_m2p_client {
char *name;
u8 flags;
struct ep93xx_dma_buffer *buf,
int bytes, int error);
- /* Internal to the DMA code. */
+ /* private: Internal use only */
void *channel;
};
+/* DMA M2P ports */
#define EP93XX_DMA_M2P_PORT_I2S1 0x00
#define EP93XX_DMA_M2P_PORT_I2S2 0x01
#define EP93XX_DMA_M2P_PORT_AAC1 0x02
#define EP93XX_DMA_M2P_PORT_UART3 0x08
#define EP93XX_DMA_M2P_PORT_IRDA 0x09
#define EP93XX_DMA_M2P_PORT_MASK 0x0f
-#define EP93XX_DMA_M2P_TX 0x00
-#define EP93XX_DMA_M2P_RX 0x10
-#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20
-#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40
-#define EP93XX_DMA_M2P_ERROR_MASK 0x60
-int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+/* DMA M2P client flags */
+#define EP93XX_DMA_M2P_TX 0x00 /* Memory to peripheral */
+#define EP93XX_DMA_M2P_RX 0x10 /* Peripheral to memory */
+
+/*
+ * DMA M2P client error handling flags. See the EP93xx users guide
+ * documentation on the DMA M2P CONTROL register for more details
+ */
+#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 /* Abort on peripheral error */
+#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 /* Ignore peripheral errors */
+#define EP93XX_DMA_M2P_ERROR_MASK 0x60 /* Mask of error bits */
+
+/**
+ * ep93xx_dma_m2p_client_register - Register a client with the DMA M2P
+ * subsystem
+ *
+ * @m2p: Client information to register
+ * returns 0 on success
+ *
+ * The DMA M2P subsystem allocates a channel and an interrupt line for the DMA
+ * client
+ */
+int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+
+/**
+ * ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P
+ * subsystem
+ *
+ * @m2p: Client to unregister
+ *
+ * Any transfers currently in progress will be completed in hardware, but
+ * ignored in software.
+ */
void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p);
+
+/**
+ * ep93xx_dma_m2p_submit - Submit a DMA M2P transfer
+ *
+ * @m2p: DMA Client to submit the transfer on
+ * @buf: DMA Buffer to submit
+ *
+ * If the current or next transfer positions are free on the M2P client then
+ * the transfer is started immediately. If not, the transfer is added to the
+ * list of pending transfers. This function must not be called from the
+ * buffer_finished callback for an M2P channel.
+ *
+ */
void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p,
struct ep93xx_dma_buffer *buf);
+
+/**
+ * ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list
+ * for an M2P channel
+ *
+ * @m2p: DMA Client to submit the transfer on
+ * @buf: DMA Buffer to submit
+ *
+ * This function must only be called from the buffer_finished callback for an
+ * M2P channel. It is commonly used to add the next transfer in a chained list
+ * of DMA transfers.
+ */
void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p,
struct ep93xx_dma_buffer *buf);
+
+/**
+ * ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client
+ *
+ * @m2p: DMA client to flush transfers on
+ *
+ * Any transfers currently in progress will be completed in hardware, but
+ * ignored in software.
+ *
+ */
void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p);
#endif /* __ASM_ARCH_DMA_H */
kirkwood_pcie_id(&dev, &rev);
- if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
- rev == MV88F6281_REV_A1)) ||
- (dev == MV88F6282_DEV_ID))
- return 200000000;
+ if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID)
+ if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0)
+ return 200000000;
return 166666667;
}
.init_machine = d2net_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
pr_err("Failed to power up HDD%d\n", i + 1);
}
}
-
-/*****************************************************************************
- * Timer
- ****************************************************************************/
-
-static void lacie_v2_timer_init(void)
-{
- kirkwood_tclk = 166666667;
- orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer lacie_v2_timer = {
- .init = lacie_v2_timer_init,
-};
void lacie_v2_register_i2c_devices(void);
void lacie_v2_hdd_power_init(int hdd_num);
-extern struct sys_timer lacie_v2_timer;
-
#endif
}
printk("\n");
- while (*mpp_list) {
+ for ( ; *mpp_list; mpp_list++) {
unsigned int num = MPP_NUM(*mpp_list);
unsigned int sel = MPP_SEL(*mpp_list);
int shift, gpio_mode;
if (sel != 0)
gpio_mode = 0;
orion_gpio_set_valid(num, gpio_mode);
-
- mpp_list++;
}
printk(KERN_DEBUG " final MPP regs:");
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
#include "mpp.h"
#include "tsx1x-common.h"
+/* for the PCIe reset workaround */
+#include <plat/pcie.h>
+
+
#define QNAP_TS41X_JUMPER_JP1 45
static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
static int __init ts41x_pci_init(void)
{
- if (machine_is_ts41x())
+ if (machine_is_ts41x()) {
+ /*
+ * Without this explicit reset, the PCIe SATA controller
+ * (Marvell 88sx7042/sata_mv) is known to stop working
+ * after a few minutes.
+ */
+ orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+
kirkwood_pcie_init(KW_PCIE0);
+ }
return 0;
}
#ifdef CONFIG_CPU_MMP2
static inline int cpu_is_mmp2(void)
{
- return (((cpu_readid_id() >> 8) & 0xff) == 0x58);
+ return (((read_cpuid_id() >> 8) & 0xff) == 0x58);
+}
#else
#define cpu_is_mmp2() (0)
#endif
}
printk("\n");
- while (*mpp_list) {
+ for ( ; *mpp_list; mpp_list++) {
unsigned int num = MPP_NUM(*mpp_list);
unsigned int sel = MPP_SEL(*mpp_list);
int shift, gpio_mode;
if (sel != 0)
gpio_mode = 0;
orion_gpio_set_valid(num, gpio_mode);
-
- mpp_list++;
}
printk(KERN_DEBUG " final MPP regs:");
/* Initialize gpiolib. */
orion_gpio_init();
- while (mode->mpp >= 0) {
+ for ( ; mode->mpp >= 0; mode++) {
u32 *reg;
int num_type;
int shift;
orion_gpio_set_unused(mode->mpp);
orion_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO));
-
- mode++;
}
writel(mpp_0_7_ctrl, MPP_0_7_CTRL);
static struct resource ts78xx_ts_nand_resources = {
.start = TS_NAND_DATA,
.end = TS_NAND_DATA + 4,
- .flags = IORESOURCE_IO,
+ .flags = IORESOURCE_MEM,
};
static struct platform_device ts78xx_ts_nand_device = {
static void __init cmx2xx_init_irq(void)
{
- pxa27x_init_irq();
-
if (cpu_is_pxa25x()) {
pxa25x_init_irq();
cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ);
},
};
-#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULE)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static uint16_t lcd_power_on[] = {
/* single frame */
SMART_CMD_NOOP,
static void __init ct_ca9x4_map_io(void)
{
+#ifdef CONFIG_LOCAL_TIMERS
twd_base = MMIO_P2V(A9_MPCORE_TWD);
+#endif
v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
}
* fragmentation of the DMA space, and also prevents allocations
* smaller than a section from crossing a section boundary.
*/
- bit = fls(size - 1) + 1;
+ bit = fls(size - 1);
if (bit > SECTION_SHIFT)
bit = SECTION_SHIFT;
align = 1 << bit;
#ifndef __PLAT_PCIE_H
#define __PLAT_PCIE_H
+struct pci_bus;
+
u32 orion_pcie_dev_id(void __iomem *base);
u32 orion_pcie_rev(void __iomem *base);
int orion_pcie_link_up(void __iomem *base);
int orion_pcie_x4_mode(void __iomem *base);
int orion_pcie_get_local_bus_nr(void __iomem *base);
void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
+void orion_pcie_reset(void __iomem *base);
void orion_pcie_setup(void __iomem *base,
struct mbus_dram_target_info *dram);
int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus,
u16 cmd;
u32 mask;
- /*
- * soft reset PCIe unit
- */
- orion_pcie_reset(base);
-
/*
* Point PCIe unit MBUS decode windows to DRAM space.
*/
struct task_struct;
-extern long subarch_ptrace(struct task_struct *child, long request, long addr,
- long data);
+extern long subarch_ptrace(struct task_struct *child, long request,
+ unsigned long addr, unsigned long data);
extern unsigned long getreg(struct task_struct *child, int regno);
extern int putreg(struct task_struct *child, int regno, unsigned long value);
extern int get_fpregs(struct user_i387_struct __user *buf,
break;
case PTRACE_SET_THREAD_AREA:
- ret = ptrace_set_thread_area(child, addr, datavp);
+ ret = ptrace_set_thread_area(child, addr, vp);
break;
case PTRACE_FAULTINFO: {
static inline u32 native_apic_msr_read(u32 reg)
{
- u32 low, high;
+ u64 msr;
if (reg == APIC_DFR)
return -1;
- rdmsr(APIC_BASE_MSR + (reg >> 4), low, high);
- return low;
+ rdmsrl(APIC_BASE_MSR + (reg >> 4), msr);
+ return (u32)msr;
}
static inline void native_x2apic_wait_icr_idle(void)
extern void x2apic_icr_write(u32 low, u32 id);
static inline int x2apic_enabled(void)
{
- int msr, msr2;
+ u64 msr;
if (!cpu_has_x2apic)
return 0;
- rdmsr(MSR_IA32_APICBASE, msr, msr2);
+ rdmsrl(MSR_IA32_APICBASE, msr);
if (msr & X2APIC_ENABLE)
return 1;
return 0;
} s;
};
+/* ========================================================================= */
+/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR 0x16000c8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_0_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_alias210_overlay_config_0_mmr_s {
+ unsigned long rsvd_0_23: 24; /* */
+ unsigned long base : 8; /* RW */
+ unsigned long rsvd_32_47: 16; /* */
+ unsigned long m_alias : 5; /* RW */
+ unsigned long rsvd_53_62: 10; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR 0x16000d8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_1_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_alias210_overlay_config_1_mmr_s {
+ unsigned long rsvd_0_23: 24; /* */
+ unsigned long base : 8; /* RW */
+ unsigned long rsvd_32_47: 16; /* */
+ unsigned long m_alias : 5; /* RW */
+ unsigned long rsvd_53_62: 10; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR 0x16000e8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_2_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_alias210_overlay_config_2_mmr_s {
+ unsigned long rsvd_0_23: 24; /* */
+ unsigned long base : 8; /* RW */
+ unsigned long rsvd_32_47: 16; /* */
+ unsigned long m_alias : 5; /* RW */
+ unsigned long rsvd_53_62: 10; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
/* ========================================================================= */
/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR */
/* ========================================================================= */
} s;
};
+/* ========================================================================= */
+/* UVH_RH_GAM_CONFIG_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_CONFIG_MMR 0x1600000UL
+
+#define UVH_RH_GAM_CONFIG_MMR_M_SKT_SHFT 0
+#define UVH_RH_GAM_CONFIG_MMR_M_SKT_MASK 0x000000000000003fUL
+#define UVH_RH_GAM_CONFIG_MMR_N_SKT_SHFT 6
+#define UVH_RH_GAM_CONFIG_MMR_N_SKT_MASK 0x00000000000003c0UL
+#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_SHFT 12
+#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_MASK 0x0000000000001000UL
+
+union uvh_rh_gam_config_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_config_mmr_s {
+ unsigned long m_skt : 6; /* RW */
+ unsigned long n_skt : 4; /* RW */
+ unsigned long rsvd_10_11: 2; /* */
+ unsigned long mmiol_cfg : 1; /* RW */
+ unsigned long rsvd_13_63: 51; /* */
+ } s;
+};
+
/* ========================================================================= */
/* UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR */
/* ========================================================================= */
} s;
};
-/* ========================================================================= */
-/* UVH_SI_ADDR_MAP_CONFIG */
-/* ========================================================================= */
-#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL
-
-#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0
-#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL
-#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8
-#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL
-
-union uvh_si_addr_map_config_u {
- unsigned long v;
- struct uvh_si_addr_map_config_s {
- unsigned long m_skt : 6; /* RW */
- unsigned long rsvd_6_7: 2; /* */
- unsigned long n_skt : 4; /* RW */
- unsigned long rsvd_12_63: 52; /* */
- } s;
-};
-
-/* ========================================================================= */
-/* UVH_SI_ALIAS0_OVERLAY_CONFIG */
-/* ========================================================================= */
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL
-
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias0_overlay_config_u {
- unsigned long v;
- struct uvh_si_alias0_overlay_config_s {
- unsigned long rsvd_0_23: 24; /* */
- unsigned long base : 8; /* RW */
- unsigned long rsvd_32_47: 16; /* */
- unsigned long m_alias : 5; /* RW */
- unsigned long rsvd_53_62: 10; /* */
- unsigned long enable : 1; /* RW */
- } s;
-};
-
-/* ========================================================================= */
-/* UVH_SI_ALIAS1_OVERLAY_CONFIG */
-/* ========================================================================= */
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL
-
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias1_overlay_config_u {
- unsigned long v;
- struct uvh_si_alias1_overlay_config_s {
- unsigned long rsvd_0_23: 24; /* */
- unsigned long base : 8; /* RW */
- unsigned long rsvd_32_47: 16; /* */
- unsigned long m_alias : 5; /* RW */
- unsigned long rsvd_53_62: 10; /* */
- unsigned long enable : 1; /* RW */
- } s;
-};
-
-/* ========================================================================= */
-/* UVH_SI_ALIAS2_OVERLAY_CONFIG */
-/* ========================================================================= */
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL
-
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias2_overlay_config_u {
- unsigned long v;
- struct uvh_si_alias2_overlay_config_s {
- unsigned long rsvd_0_23: 24; /* */
- unsigned long base : 8; /* RW */
- unsigned long rsvd_32_47: 16; /* */
- unsigned long m_alias : 5; /* RW */
- unsigned long rsvd_53_62: 10; /* */
- unsigned long enable : 1; /* RW */
- } s;
-};
-
-#endif /* _ASM_X86_UV_UV_MMRS_H */
+#endif /* __ASM_UV_MMRS_X86_H__ */
#include <asm/mce.h>
#include <asm/kvm_para.h>
#include <asm/tsc.h>
-#include <asm/atomic.h>
unsigned int num_processors;
#define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT
static __initdata struct redir_addr redir_addrs[] = {
- {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG},
- {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG},
- {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG},
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR},
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR},
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR},
};
static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
{
- union uvh_si_alias0_overlay_config_u alias;
+ union uvh_rh_gam_alias210_overlay_config_2_mmr_u alias;
union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect;
int i;
void __init uv_system_init(void)
{
- union uvh_si_addr_map_config_u m_n_config;
+ union uvh_rh_gam_config_mmr_u m_n_config;
union uvh_node_id_u node_id;
unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
map_low_mmrs();
- m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
+ m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR );
m_val = m_n_config.s.m_skt;
n_val = m_n_config.s.n_skt;
mmr_base =
struct amd_nb *nb;
int i;
- nb = kmalloc(sizeof(struct amd_nb), GFP_KERNEL);
+ nb = kmalloc_node(sizeof(struct amd_nb), GFP_KERNEL | __GFP_ZERO,
+ cpu_to_node(cpu));
if (!nb)
return NULL;
- memset(nb, 0, sizeof(*nb));
nb->nb_id = nb_id;
/*
return 0;
}
- equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size);
+ equiv_cpu_table = vmalloc(size);
if (!equiv_cpu_table) {
pr_err("failed to allocate equivalent CPU table\n");
return 0;
wrmsrl(address, val);
}
-static int __devinit set_check_enable_amd_mmconf(const struct dmi_system_id *d)
+static int __init set_check_enable_amd_mmconf(const struct dmi_system_id *d)
{
pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
return 0;
}
-static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = {
+static const struct dmi_system_id __initconst mmconf_dmi_table[] = {
{
.callback = set_check_enable_amd_mmconf,
.ident = "Sun Microsystems Machine",
{}
};
-void __cpuinit check_enable_amd_mmconf_dmi(void)
+/* Called from a __cpuinit function, but only on the BSP. */
+void __ref check_enable_amd_mmconf_dmi(void)
{
dmi_check_system(mmconf_dmi_table);
}
valid_flags = flags;
}
-/*
- * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
- * yielding a 64-bit result.
- */
-static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
-{
- u64 product;
-#ifdef __i386__
- u32 tmp1, tmp2;
-#endif
-
- if (shift < 0)
- delta >>= -shift;
- else
- delta <<= shift;
-
-#ifdef __i386__
- __asm__ (
- "mul %5 ; "
- "mov %4,%%eax ; "
- "mov %%edx,%4 ; "
- "mul %5 ; "
- "xor %5,%5 ; "
- "add %4,%%eax ; "
- "adc %5,%%edx ; "
- : "=A" (product), "=r" (tmp1), "=r" (tmp2)
- : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
-#elif defined(__x86_64__)
- __asm__ (
- "mul %%rdx ; shrd $32,%%rdx,%%rax"
- : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
-#else
-#error implement me!
-#endif
-
- return product;
-}
-
static u64 pvclock_get_nsec_offset(struct pvclock_shadow_time *shadow)
{
u64 delta = native_read_tsc() - shadow->tsc_timestamp;
}
}
-static int tlb_cpuhp_notify(struct notifier_block *n,
+static int __cpuinit tlb_cpuhp_notify(struct notifier_block *n,
unsigned long action, void *hcpu)
{
switch (action & 0xf) {
irq = xen_allocate_pirq(v[i], 0, /* not sharable */
(type == PCI_CAP_ID_MSIX) ?
"pcifront-msi-x" : "pcifront-msi");
- if (irq < 0)
- return -1;
+ if (irq < 0) {
+ ret = -1;
+ goto free;
+ }
ret = set_irq_msi(irq, msidesc);
if (ret)
if (ret == -ENODEV)
dev_err(&dev->dev, "Xen PCI frontend has not registered" \
" MSI/MSI-X support!\n");
-
+free:
kfree(v);
return ret;
}
* each bau_desc is 64 bytes; there are 8 (UV_ITEMS_PER_DESCRIPTOR)
* per cpu; and up to 32 (UV_ADP_SIZE) cpu's per uvhub
*/
- bau_desc = (struct bau_desc *)kmalloc_node(sizeof(struct bau_desc)*
- UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
+ bau_desc = kmalloc_node(sizeof(struct bau_desc) * UV_ADP_SIZE
+ * UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
BUG_ON(!bau_desc);
pa = uv_gpa(bau_desc); /* need the real nasid*/
struct bau_payload_queue_entry *pqp_malloc;
struct bau_control *bcp;
- pqp = (struct bau_payload_queue_entry *) kmalloc_node(
- (DEST_Q_SIZE + 1) * sizeof(struct bau_payload_queue_entry),
- GFP_KERNEL, node);
+ pqp = kmalloc_node((DEST_Q_SIZE + 1)
+ * sizeof(struct bau_payload_queue_entry),
+ GFP_KERNEL, node);
BUG_ON(!pqp);
pqp_malloc = pqp;
timeout_us = calculate_destination_timeout();
- uvhub_descs = (struct uvhub_desc *)
- kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL);
+ uvhub_descs = kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL);
memset(uvhub_descs, 0, nuvhubs * sizeof(struct uvhub_desc));
uvhub_mask = kzalloc((nuvhubs+7)/8, GFP_KERNEL);
for_each_present_cpu(cpu) {
{
pmd_t *kernel_pmd;
- level2_kernel_pgt = extend_brk(sizeof(pmd_t *) * PTRS_PER_PMD, PAGE_SIZE);
+ level2_kernel_pgt = extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) +
xen_start_info->nr_pt_frames * PAGE_SIZE +
const struct e820map *e820)
{
phys_addr_t max_addr = PFN_PHYS(max_pfn);
- phys_addr_t last_end = 0;
+ phys_addr_t last_end = ISA_END_ADDRESS;
unsigned long released = 0;
int i;
+ /* Free any unused memory above the low 1Mbyte. */
for (i = 0; i < e820->nr_map && last_end < max_addr; i++) {
phys_addr_t end = e820->map[i].addr;
end = min(max_addr, end);
- released += xen_release_chunk(last_end, end);
- last_end = e820->map[i].addr + e820->map[i].size;
+ if (last_end < end)
+ released += xen_release_chunk(last_end, end);
+ last_end = max(last_end, e820->map[i].addr + e820->map[i].size);
}
if (last_end < max_addr)
XENMEM_memory_map;
rc = HYPERVISOR_memory_op(op, &memmap);
if (rc == -ENOSYS) {
+ BUG_ON(xen_initial_domain());
memmap.nr_entries = 1;
map[0].addr = 0ULL;
map[0].size = mem_end;
}
/*
- * Even though this is normal, usable memory under Xen, reserve
- * ISA memory anyway because too many things think they can poke
+ * In domU, the ISA region is normal, usable memory, but we
+ * reserve ISA memory anyway because too many things poke
* about in there.
*
- * In a dom0 kernel, this region is identity mapped with the
- * hardware ISA area, so it really is out of bounds.
+ * In Dom0, the host E820 information can leave gaps in the
+ * ISA range, which would cause us to release those pages. To
+ * avoid this, we unconditionally reserve them here.
*/
e820_add_region(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS,
E820_RESERVED);
int where = ELEVATOR_INSERT_SORT;
int rw_flags;
- /* REQ_HARDBARRIER is no more */
- if (WARN_ONCE(bio->bi_rw & REQ_HARDBARRIER,
- "block: HARDBARRIER is deprecated, use FLUSH/FUA instead\n")) {
- bio_endio(bio, -EOPNOTSUPP);
- return 0;
- }
-
/*
* low level driver can indicate that it wants pages above a
* certain limit bounced to low memory (ie for highmem, or even
bdevname(bio->bi_bdev, b),
bio->bi_rw,
(unsigned long long)bio->bi_sector + bio_sectors(bio),
- (long long)(bio->bi_bdev->bd_inode->i_size >> 9));
+ (long long)(i_size_read(bio->bi_bdev->bd_inode) >> 9));
set_bit(BIO_EOF, &bio->bi_flags);
}
return 0;
/* Test device or partition size, when known. */
- maxsector = bio->bi_bdev->bd_inode->i_size >> 9;
+ maxsector = i_size_read(bio->bi_bdev->bd_inode) >> 9;
if (maxsector) {
sector_t sector = bio->bi_sector;
}
EXPORT_SYMBOL(get_io_context);
-void copy_io_context(struct io_context **pdst, struct io_context **psrc)
-{
- struct io_context *src = *psrc;
- struct io_context *dst = *pdst;
-
- if (src) {
- BUG_ON(atomic_long_read(&src->refcount) == 0);
- atomic_long_inc(&src->refcount);
- put_io_context(dst);
- *pdst = src;
- }
-}
-EXPORT_SYMBOL(copy_io_context);
-
static int __init blk_ioc_init(void)
{
iocontext_cachep = kmem_cache_create("blkdev_ioc",
unaligned = 1;
break;
}
+ if (!iov[i].iov_len)
+ return -EINVAL;
}
if (unaligned || (q->dma_pad_mask & len) || map_data)
bdi->ra_pages = (arg * 512) / PAGE_CACHE_SIZE;
return 0;
case BLKGETSIZE:
- size = bdev->bd_inode->i_size;
+ size = i_size_read(bdev->bd_inode);
if ((size >> 9) > ~0UL)
return -EFBIG;
return compat_put_ulong(arg, size >> 9);
case BLKGETSIZE64_32:
- return compat_put_u64(arg, bdev->bd_inode->i_size);
+ return compat_put_u64(arg, i_size_read(bdev->bd_inode));
case BLKTRACESETUP32:
case BLKTRACESTART: /* compatible */
q->nr_sorted--;
boundary = q->end_sector;
- stop_flags = REQ_SOFTBARRIER | REQ_HARDBARRIER | REQ_STARTED;
+ stop_flags = REQ_SOFTBARRIER | REQ_STARTED;
list_for_each_prev(entry, &q->queue_head) {
struct request *pos = list_entry_rq(entry);
void __elv_add_request(struct request_queue *q, struct request *rq, int where,
int plug)
{
- if (rq->cmd_flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) {
+ if (rq->cmd_flags & REQ_SOFTBARRIER) {
/* barriers are scheduling boundary, update end_sector */
if (rq->cmd_type == REQ_TYPE_FS ||
(rq->cmd_flags & REQ_DISCARD)) {
start >>= 9;
len >>= 9;
- if (start + len > (bdev->bd_inode->i_size >> 9))
+ if (start + len > (i_size_read(bdev->bd_inode) >> 9))
return -EINVAL;
if (secure)
flags |= BLKDEV_DISCARD_SECURE;
* We need to set the startsect first, the driver may
* want to override it.
*/
+ memset(&geo, 0, sizeof(geo));
geo.start = get_start_sect(bdev);
ret = disk->fops->getgeo(bdev, &geo);
if (ret)
ret = blkdev_reread_part(bdev);
break;
case BLKGETSIZE:
- size = bdev->bd_inode->i_size;
+ size = i_size_read(bdev->bd_inode);
if ((size >> 9) > ~0UL)
return -EFBIG;
return put_ulong(arg, size >> 9);
case BLKGETSIZE64:
- return put_u64(arg, bdev->bd_inode->i_size);
+ return put_u64(arg, i_size_read(bdev->bd_inode));
case BLKTRACESTART:
case BLKTRACESTOP:
case BLKTRACESETUP:
if (hdr->iovec_count) {
const int size = sizeof(struct sg_iovec) * hdr->iovec_count;
size_t iov_data_len;
- struct sg_iovec *iov;
+ struct sg_iovec *sg_iov;
+ struct iovec *iov;
+ int i;
- iov = kmalloc(size, GFP_KERNEL);
- if (!iov) {
+ sg_iov = kmalloc(size, GFP_KERNEL);
+ if (!sg_iov) {
ret = -ENOMEM;
goto out;
}
- if (copy_from_user(iov, hdr->dxferp, size)) {
- kfree(iov);
+ if (copy_from_user(sg_iov, hdr->dxferp, size)) {
+ kfree(sg_iov);
ret = -EFAULT;
goto out;
}
+ /*
+ * Sum up the vecs, making sure they don't overflow
+ */
+ iov = (struct iovec *) sg_iov;
+ iov_data_len = 0;
+ for (i = 0; i < hdr->iovec_count; i++) {
+ if (iov_data_len + iov[i].iov_len < iov_data_len) {
+ kfree(sg_iov);
+ ret = -EINVAL;
+ goto out;
+ }
+ iov_data_len += iov[i].iov_len;
+ }
+
/* SG_IO howto says that the shorter of the two wins */
- iov_data_len = iov_length((struct iovec *)iov,
- hdr->iovec_count);
if (hdr->dxfer_len < iov_data_len) {
- hdr->iovec_count = iov_shorten((struct iovec *)iov,
+ hdr->iovec_count = iov_shorten(iov,
hdr->iovec_count,
hdr->dxfer_len);
iov_data_len = hdr->dxfer_len;
}
- ret = blk_rq_map_user_iov(q, rq, NULL, iov, hdr->iovec_count,
+ ret = blk_rq_map_user_iov(q, rq, NULL, sg_iov, hdr->iovec_count,
iov_data_len, GFP_KERNEL);
- kfree(iov);
+ kfree(sg_iov);
} else if (hdr->dxfer_len)
ret = blk_rq_map_user(q, rq, NULL, hdr->dxferp, hdr->dxfer_len,
GFP_KERNEL);
static void pcrypt_fini_padata(struct padata_pcrypt *pcrypt)
{
- kobject_put(&pcrypt->pinst->kobj);
free_cpumask_var(pcrypt->cb_cpumask->mask);
kfree(pcrypt->cb_cpumask);
BUG();
bio_endio(bio, -ENXIO);
return 0;
- } else if (bio->bi_rw & REQ_HARDBARRIER) {
- bio_endio(bio, -EOPNOTSUPP);
- return 0;
} else if (bio->bi_io_vec == NULL) {
printk(KERN_ERR "aoe: bi_io_vec is NULL\n");
BUG();
{0x409D0E11, "Smart Array 6400 EM", &SA5_access},
{0x40910E11, "Smart Array 6i", &SA5_access},
{0x3225103C, "Smart Array P600", &SA5_access},
+ {0x3223103C, "Smart Array P800", &SA5_access},
+ {0x3234103C, "Smart Array P400", &SA5_access},
{0x3235103C, "Smart Array P400i", &SA5_access},
{0x3211103C, "Smart Array E200i", &SA5_access},
{0x3212103C, "Smart Array E200", &SA5_access},
for (i = 0; i < MAX_CONFIG_WAIT; i++) {
if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
break;
- msleep(10);
+ usleep_range(10000, 20000);
}
}
*board_id = ((subsystem_device_id << 16) & 0xffff0000) |
subsystem_vendor_id;
- for (i = 0; i < ARRAY_SIZE(products); i++) {
+ for (i = 0; i < ARRAY_SIZE(products); i++)
if (*board_id == products[i].board_id)
return i;
- }
dev_warn(&pdev->dev, "unrecognized board ID: 0x%08x, ignoring.\n",
*board_id);
return -ENODEV;
return -ENODEV;
}
-static int __devinit cciss_wait_for_board_ready(ctlr_info_t *h)
+static int __devinit cciss_wait_for_board_state(struct pci_dev *pdev,
+ void __iomem *vaddr, int wait_for_ready)
+#define BOARD_READY 1
+#define BOARD_NOT_READY 0
{
- int i;
+ int i, iterations;
u32 scratchpad;
- for (i = 0; i < CCISS_BOARD_READY_ITERATIONS; i++) {
- scratchpad = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
- if (scratchpad == CCISS_FIRMWARE_READY)
- return 0;
+ if (wait_for_ready)
+ iterations = CCISS_BOARD_READY_ITERATIONS;
+ else
+ iterations = CCISS_BOARD_NOT_READY_ITERATIONS;
+
+ for (i = 0; i < iterations; i++) {
+ scratchpad = readl(vaddr + SA5_SCRATCHPAD_OFFSET);
+ if (wait_for_ready) {
+ if (scratchpad == CCISS_FIRMWARE_READY)
+ return 0;
+ } else {
+ if (scratchpad != CCISS_FIRMWARE_READY)
+ return 0;
+ }
msleep(CCISS_BOARD_READY_POLL_INTERVAL_MSECS);
}
- dev_warn(&h->pdev->dev, "board not ready, timed out.\n");
+ dev_warn(&pdev->dev, "board not ready, timed out.\n");
return -ENODEV;
}
static void __devinit cciss_get_max_perf_mode_cmds(struct ctlr_info *h)
{
h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
+
+ /* Limit commands in memory limited kdump scenario. */
+ if (reset_devices && h->max_commands > 32)
+ h->max_commands = 32;
+
if (h->max_commands < 16) {
dev_warn(&h->pdev->dev, "Controller reports "
"max supported commands of %d, an obvious lie. "
err = -ENOMEM;
goto err_out_free_res;
}
- err = cciss_wait_for_board_ready(h);
+ err = cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
if (err)
goto err_out_free_res;
err = cciss_find_cfgtables(h);
#define cciss_soft_reset_controller(p) cciss_message(p, 1, 0)
#define cciss_noop(p) cciss_message(p, 3, 0)
-static __devinit int cciss_reset_msi(struct pci_dev *pdev)
-{
-/* the #defines are stolen from drivers/pci/msi.h. */
-#define msi_control_reg(base) (base + PCI_MSI_FLAGS)
-#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
-
- int pos;
- u16 control = 0;
-
- pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
- if (pos) {
- pci_read_config_word(pdev, msi_control_reg(pos), &control);
- if (control & PCI_MSI_FLAGS_ENABLE) {
- dev_info(&pdev->dev, "resetting MSI\n");
- pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE);
- }
- }
-
- pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
- if (pos) {
- pci_read_config_word(pdev, msi_control_reg(pos), &control);
- if (control & PCI_MSIX_FLAGS_ENABLE) {
- dev_info(&pdev->dev, "resetting MSI-X\n");
- pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE);
- }
- }
-
- return 0;
-}
-
static int cciss_controller_hard_reset(struct pci_dev *pdev,
void * __iomem vaddr, bool use_doorbell)
{
* states or using the doorbell register. */
static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
{
- u16 saved_config_space[32];
u64 cfg_offset;
u32 cfg_base_addr;
u64 cfg_base_addr_index;
void __iomem *vaddr;
unsigned long paddr;
u32 misc_fw_support, active_transport;
- int rc, i;
+ int rc;
CfgTable_struct __iomem *cfgtable;
bool use_doorbell;
u32 board_id;
+ u16 command_register;
/* For controllers as old a the p600, this is very nearly
* the same thing as
* pci_set_power_state(pci_dev, PCI_D0);
* pci_restore_state(pci_dev);
*
- * but we can't use these nice canned kernel routines on
- * kexec, because they also check the MSI/MSI-X state in PCI
- * configuration space and do the wrong thing when it is
- * set/cleared. Also, the pci_save/restore_state functions
- * violate the ordering requirements for restoring the
- * configuration space from the CCISS document (see the
- * comment below). So we roll our own ....
- *
* For controllers newer than the P600, the pci power state
* method of resetting doesn't work so we have another way
* using the doorbell register.
return -ENODEV;
}
- for (i = 0; i < 32; i++)
- pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
+ /* Save the PCI command register */
+ pci_read_config_word(pdev, 4, &command_register);
+ /* Turn the board off. This is so that later pci_restore_state()
+ * won't turn the board on before the rest of config space is ready.
+ */
+ pci_disable_device(pdev);
+ pci_save_state(pdev);
/* find the first memory BAR, so we can find the cfg table */
rc = cciss_pci_find_memory_BAR(pdev, &paddr);
rc = cciss_controller_hard_reset(pdev, vaddr, use_doorbell);
if (rc)
goto unmap_cfgtable;
-
- /* Restore the PCI configuration space. The Open CISS
- * Specification says, "Restore the PCI Configuration
- * Registers, offsets 00h through 60h. It is important to
- * restore the command register, 16-bits at offset 04h,
- * last. Do not restore the configuration status register,
- * 16-bits at offset 06h." Note that the offset is 2*i.
- */
- for (i = 0; i < 32; i++) {
- if (i == 2 || i == 3)
- continue;
- pci_write_config_word(pdev, 2*i, saved_config_space[i]);
+ pci_restore_state(pdev);
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ dev_warn(&pdev->dev, "failed to enable device.\n");
+ goto unmap_cfgtable;
}
- wmb();
- pci_write_config_word(pdev, 4, saved_config_space[2]);
+ pci_write_config_word(pdev, 4, command_register);
/* Some devices (notably the HP Smart Array 5i Controller)
need a little pause here */
msleep(CCISS_POST_RESET_PAUSE_MSECS);
+ /* Wait for board to become not ready, then ready. */
+ dev_info(&pdev->dev, "Waiting for board to become ready.\n");
+ rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_NOT_READY);
+ if (rc) /* Don't bail, might be E500, etc. which can't be reset */
+ dev_warn(&pdev->dev,
+ "failed waiting for board to become not ready\n");
+ rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_READY);
+ if (rc) {
+ dev_warn(&pdev->dev,
+ "failed waiting for board to become ready\n");
+ goto unmap_cfgtable;
+ }
+ dev_info(&pdev->dev, "board ready.\n");
+
/* Controller should be in simple mode at this point. If it's not,
* It means we're on one of those controllers which doesn't support
* the doorbell reset method and on which the PCI power management reset
return 0; /* just try to do the kdump anyhow. */
if (rc)
return -ENODEV;
- if (cciss_reset_msi(pdev))
- return -ENODEV;
/* Now try to get the controller to respond to a no-op */
for (i = 0; i < CCISS_POST_RESET_NOOP_RETRIES; i++) {
}
}
kthread_stop(cciss_scan_thread);
- remove_proc_entry("driver/cciss", NULL);
+ if (proc_cciss)
+ remove_proc_entry("driver/cciss", NULL);
bus_unregister(&cciss_bus_type);
}
* the above.
*/
#define CCISS_BOARD_READY_WAIT_SECS (120)
+#define CCISS_BOARD_NOT_READY_WAIT_SECS (10)
#define CCISS_BOARD_READY_POLL_INTERVAL_MSECS (100)
#define CCISS_BOARD_READY_ITERATIONS \
((CCISS_BOARD_READY_WAIT_SECS * 1000) / \
CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
+#define CCISS_BOARD_NOT_READY_ITERATIONS \
+ ((CCISS_BOARD_NOT_READY_WAIT_SECS * 1000) / \
+ CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
#define CCISS_POST_RESET_PAUSE_MSECS (3000)
#define CCISS_POST_RESET_NOOP_INTERVAL_MSECS (1000)
#define CCISS_POST_RESET_NOOP_RETRIES (12)
init_completion(&md_io.event);
md_io.error = 0;
- if ((rw & WRITE) && !test_bit(MD_NO_BARRIER, &mdev->flags))
- rw |= REQ_HARDBARRIER;
+ if ((rw & WRITE) && !test_bit(MD_NO_FUA, &mdev->flags))
+ rw |= REQ_FUA;
rw |= REQ_UNPLUG | REQ_SYNC;
- retry:
bio = bio_alloc(GFP_NOIO, 1);
bio->bi_bdev = bdev->md_bdev;
bio->bi_sector = sector;
wait_for_completion(&md_io.event);
ok = bio_flagged(bio, BIO_UPTODATE) && md_io.error == 0;
- /* check for unsupported barrier op.
- * would rather check on EOPNOTSUPP, but that is not reliable.
- * don't try again for ANY return value != 0 */
- if (unlikely((bio->bi_rw & REQ_HARDBARRIER) && !ok)) {
- /* Try again with no barrier */
- dev_warn(DEV, "Barriers not supported on meta data device - disabling\n");
- set_bit(MD_NO_BARRIER, &mdev->flags);
- rw &= ~REQ_HARDBARRIER;
- bio_put(bio);
- goto retry;
- }
out:
bio_put(bio);
return ok;
u32 xor_sum = 0;
if (!get_ldev(mdev)) {
- dev_err(DEV, "get_ldev() failed in w_al_write_transaction\n");
+ dev_err(DEV,
+ "disk is %s, cannot start al transaction (-%d +%d)\n",
+ drbd_disk_str(mdev->state.disk), evicted, new_enr);
complete(&((struct update_al_work *)w)->event);
return 1;
}
/* do we have to do a bitmap write, first?
* TODO reduce maximum latency:
* submit both bios, then wait for both,
- * instead of doing two synchronous sector writes. */
+ * instead of doing two synchronous sector writes.
+ * For now, we must not write the transaction,
+ * if we cannot write out the bitmap of the evicted extent. */
if (mdev->state.conn < C_CONNECTED && evicted != LC_FREE)
drbd_bm_write_sect(mdev, evicted/AL_EXT_PER_BM_SECT);
- mutex_lock(&mdev->md_io_mutex); /* protects md_io_page, al_tr_cycle, ... */
+ /* The bitmap write may have failed, causing a state change. */
+ if (mdev->state.disk < D_INCONSISTENT) {
+ dev_err(DEV,
+ "disk is %s, cannot write al transaction (-%d +%d)\n",
+ drbd_disk_str(mdev->state.disk), evicted, new_enr);
+ complete(&((struct update_al_work *)w)->event);
+ put_ldev(mdev);
+ return 1;
+ }
+
+ mutex_lock(&mdev->md_io_mutex); /* protects md_io_buffer, al_tr_cycle, ... */
buffer = (struct al_transaction *)page_address(mdev->md_io_page);
buffer->magic = __constant_cpu_to_be32(DRBD_MAGIC);
unsigned int enr;
unsigned long add = 0;
char ppb[10];
- int i;
+ int i, tmp;
wait_event(mdev->al_wait, lc_try_lock(mdev->act_log));
enr = lc_element_by_index(mdev->act_log, i)->lc_number;
if (enr == LC_FREE)
continue;
- add += drbd_bm_ALe_set_all(mdev, enr);
+ tmp = drbd_bm_ALe_set_all(mdev, enr);
+ dynamic_dev_dbg(DEV, "AL: set %d bits in extent %u\n", tmp, enr);
+ add += tmp;
}
lc_unlock(mdev->act_log);
#define D_ASSERT(exp) if (!(exp)) \
dev_err(DEV, "ASSERT( " #exp " ) in %s:%d\n", __FILE__, __LINE__)
-#define ERR_IF(exp) if (({ \
- int _b = (exp) != 0; \
- if (_b) dev_err(DEV, "%s: (%s) in %s:%d\n", \
- __func__, #exp, __FILE__, __LINE__); \
- _b; \
+#define ERR_IF(exp) if (({ \
+ int _b = (exp) != 0; \
+ if (_b) dev_err(DEV, "ASSERT FAILED: %s: (%s) in %s:%d\n", \
+ __func__, #exp, __FILE__, __LINE__); \
+ _b; \
}))
/* Defines to control fault insertion */
/* drbd_epoch flag bits */
enum {
- DE_BARRIER_IN_NEXT_EPOCH_ISSUED,
- DE_BARRIER_IN_NEXT_EPOCH_DONE,
- DE_CONTAINS_A_BARRIER,
DE_HAVE_BARRIER_NUMBER,
- DE_IS_FINISHING,
};
enum epoch_event {
EV_PUT,
EV_GOT_BARRIER_NR,
- EV_BARRIER_DONE,
EV_BECAME_LAST,
EV_CLEANUP = 32, /* used as flag */
};
__EE_CALL_AL_COMPLETE_IO,
__EE_MAY_SET_IN_SYNC,
- /* This epoch entry closes an epoch using a barrier.
- * On sucessful completion, the epoch is released,
- * and the P_BARRIER_ACK send. */
- __EE_IS_BARRIER,
-
/* In case a barrier failed,
* we need to resubmit without the barrier flag. */
__EE_RESUBMITTED,
};
#define EE_CALL_AL_COMPLETE_IO (1<<__EE_CALL_AL_COMPLETE_IO)
#define EE_MAY_SET_IN_SYNC (1<<__EE_MAY_SET_IN_SYNC)
-#define EE_IS_BARRIER (1<<__EE_IS_BARRIER)
#define EE_RESUBMITTED (1<<__EE_RESUBMITTED)
#define EE_WAS_ERROR (1<<__EE_WAS_ERROR)
#define EE_HAS_DIGEST (1<<__EE_HAS_DIGEST)
* Gets cleared when the state.conn
* goes into C_CONNECTED state. */
WRITE_BM_AFTER_RESYNC, /* A kmalloc() during resync failed */
- NO_BARRIER_SUPP, /* underlying block device doesn't implement barriers */
CONSIDER_RESYNC,
- MD_NO_BARRIER, /* meta data device does not support barriers,
- so don't even try */
+ MD_NO_FUA, /* Users wants us to not use FUA/FLUSH on meta data dev */
SUSPEND_IO, /* suspend application io */
BITMAP_IO, /* suspend application io;
once no more io in flight, start bitmap io */
BITMAP_IO_QUEUED, /* Started bitmap IO */
- GO_DISKLESS, /* Disk failed, local_cnt reached zero, we are going diskless */
+ GO_DISKLESS, /* Disk is being detached, on io-error or admin request. */
+ WAS_IO_ERROR, /* Local disk failed returned IO error */
RESYNC_AFTER_NEG, /* Resync after online grow after the attach&negotiate finished. */
NET_CONGESTED, /* The data socket is congested */
WO_none,
WO_drain_io,
WO_bdev_flush,
- WO_bio_barrier
};
struct fifo_buffer {
extern int drbd_bmio_clear_n_write(struct drbd_conf *mdev);
extern int drbd_bitmap_io(struct drbd_conf *mdev, int (*io_fn)(struct drbd_conf *), char *why);
extern void drbd_go_diskless(struct drbd_conf *mdev);
+extern void drbd_ldev_destroy(struct drbd_conf *mdev);
/* Meta data layout
case EP_PASS_ON:
if (!forcedetach) {
if (__ratelimit(&drbd_ratelimit_state))
- dev_err(DEV, "Local IO failed in %s."
- "Passing error on...\n", where);
+ dev_err(DEV, "Local IO failed in %s.\n", where);
break;
}
/* NOTE fall through to detach case if forcedetach set */
case EP_DETACH:
case EP_CALL_HELPER:
+ set_bit(WAS_IO_ERROR, &mdev->flags);
if (mdev->state.disk > D_FAILED) {
_drbd_set_state(_NS(mdev, disk, D_FAILED), CS_HARD, NULL);
- dev_err(DEV, "Local IO failed in %s."
- "Detaching...\n", where);
+ dev_err(DEV,
+ "Local IO failed in %s. Detaching...\n", where);
}
break;
}
static inline sector_t drbd_get_capacity(struct block_device *bdev)
{
/* return bdev ? get_capacity(bdev->bd_disk) : 0; */
- return bdev ? bdev->bd_inode->i_size >> 9 : 0;
+ return bdev ? i_size_read(bdev->bd_inode) >> 9 : 0;
}
/**
__release(local);
D_ASSERT(i >= 0);
if (i == 0) {
+ if (mdev->state.disk == D_DISKLESS)
+ /* even internal references gone, safe to destroy */
+ drbd_ldev_destroy(mdev);
if (mdev->state.disk == D_FAILED)
+ /* all application IO references gone. */
drbd_go_diskless(mdev);
wake_up(&mdev->misc_wait);
}
{
int io_allowed;
+ /* never get a reference while D_DISKLESS */
+ if (mdev->state.disk == D_DISKLESS)
+ return 0;
+
atomic_inc(&mdev->local_cnt);
io_allowed = (mdev->state.disk >= mins);
if (!io_allowed)
{
int r;
- if (test_bit(MD_NO_BARRIER, &mdev->flags))
+ if (test_bit(MD_NO_FUA, &mdev->flags))
return;
r = blkdev_issue_flush(mdev->ldev->md_bdev, GFP_KERNEL, NULL);
if (r) {
- set_bit(MD_NO_BARRIER, &mdev->flags);
+ set_bit(MD_NO_FUA, &mdev->flags);
dev_err(DEV, "meta data flush failed with status %d, disabling md-flushes\n", r);
}
}
ns.conn != C_UNCONNECTED && ns.conn != C_DISCONNECTING && ns.conn <= C_TEAR_DOWN)
ns.conn = os.conn;
+ /* we cannot fail (again) if we already detached */
+ if (ns.disk == D_FAILED && os.disk == D_DISKLESS)
+ ns.disk = D_DISKLESS;
+
+ /* if we are only D_ATTACHING yet,
+ * we can (and should) go directly to D_DISKLESS. */
+ if (ns.disk == D_FAILED && os.disk == D_ATTACHING)
+ ns.disk = D_DISKLESS;
+
/* After C_DISCONNECTING only C_STANDALONE may follow */
if (os.conn == C_DISCONNECTING && ns.conn != C_STANDALONE)
ns.conn = os.conn;
!test_and_set_bit(CONFIG_PENDING, &mdev->flags))
set_bit(DEVICE_DYING, &mdev->flags);
- mdev->state.i = ns.i;
+ /* if we are going -> D_FAILED or D_DISKLESS, grab one extra reference
+ * on the ldev here, to be sure the transition -> D_DISKLESS resp.
+ * drbd_ldev_destroy() won't happen before our corresponding
+ * after_state_ch works run, where we put_ldev again. */
+ if ((os.disk != D_FAILED && ns.disk == D_FAILED) ||
+ (os.disk != D_DISKLESS && ns.disk == D_DISKLESS))
+ atomic_inc(&mdev->local_cnt);
+
+ mdev->state = ns;
wake_up(&mdev->misc_wait);
wake_up(&mdev->state_wait);
if (test_bit(NEW_CUR_UUID, &mdev->flags)) {
drbd_uuid_new_current(mdev);
clear_bit(NEW_CUR_UUID, &mdev->flags);
- drbd_md_sync(mdev);
}
spin_lock_irq(&mdev->req_lock);
_drbd_set_state(_NS(mdev, susp_fen, 0), CS_VERBOSE, NULL);
os.disk > D_INCONSISTENT && ns.disk == D_INCONSISTENT)
drbd_queue_bitmap_io(mdev, &drbd_bmio_set_n_write, NULL, "set_n_write from invalidate");
- /* first half of local IO error */
- if (os.disk > D_FAILED && ns.disk == D_FAILED) {
- enum drbd_io_error_p eh = EP_PASS_ON;
+ /* first half of local IO error, failure to attach,
+ * or administrative detach */
+ if (os.disk != D_FAILED && ns.disk == D_FAILED) {
+ enum drbd_io_error_p eh;
+ int was_io_error;
+ /* corresponding get_ldev was in __drbd_set_state, to serialize
+ * our cleanup here with the transition to D_DISKLESS,
+ * so it is safe to dreference ldev here. */
+ eh = mdev->ldev->dc.on_io_error;
+ was_io_error = test_and_clear_bit(WAS_IO_ERROR, &mdev->flags);
+
+ /* current state still has to be D_FAILED,
+ * there is only one way out: to D_DISKLESS,
+ * and that may only happen after our put_ldev below. */
+ if (mdev->state.disk != D_FAILED)
+ dev_err(DEV,
+ "ASSERT FAILED: disk is %s during detach\n",
+ drbd_disk_str(mdev->state.disk));
if (drbd_send_state(mdev))
- dev_warn(DEV, "Notified peer that my disk is broken.\n");
+ dev_warn(DEV, "Notified peer that I am detaching my disk\n");
else
- dev_err(DEV, "Sending state for drbd_io_error() failed\n");
+ dev_err(DEV, "Sending state for detaching disk failed\n");
drbd_rs_cancel_all(mdev);
- if (get_ldev_if_state(mdev, D_FAILED)) {
- eh = mdev->ldev->dc.on_io_error;
- put_ldev(mdev);
- }
- if (eh == EP_CALL_HELPER)
+ /* In case we want to get something to stable storage still,
+ * this may be the last chance.
+ * Following put_ldev may transition to D_DISKLESS. */
+ drbd_md_sync(mdev);
+ put_ldev(mdev);
+
+ if (was_io_error && eh == EP_CALL_HELPER)
drbd_khelper(mdev, "local-io-error");
}
+ /* second half of local IO error, failure to attach,
+ * or administrative detach,
+ * after local_cnt references have reached zero again */
+ if (os.disk != D_DISKLESS && ns.disk == D_DISKLESS) {
+ /* We must still be diskless,
+ * re-attach has to be serialized with this! */
+ if (mdev->state.disk != D_DISKLESS)
+ dev_err(DEV,
+ "ASSERT FAILED: disk is %s while going diskless\n",
+ drbd_disk_str(mdev->state.disk));
- /* second half of local IO error handling,
- * after local_cnt references have reached zero: */
- if (os.disk == D_FAILED && ns.disk == D_DISKLESS) {
- mdev->rs_total = 0;
- mdev->rs_failed = 0;
- atomic_set(&mdev->rs_pending_cnt, 0);
- }
-
- if (os.disk > D_DISKLESS && ns.disk == D_DISKLESS) {
- /* We must still be diskless,
- * re-attach has to be serialized with this! */
- if (mdev->state.disk != D_DISKLESS)
- dev_err(DEV,
- "ASSERT FAILED: disk is %s while going diskless\n",
- drbd_disk_str(mdev->state.disk));
+ mdev->rs_total = 0;
+ mdev->rs_failed = 0;
+ atomic_set(&mdev->rs_pending_cnt, 0);
- /* we cannot assert local_cnt == 0 here, as get_ldev_if_state
- * will inc/dec it frequently. Since we became D_DISKLESS, no
- * one has touched the protected members anymore, though, so we
- * are safe to free them here. */
if (drbd_send_state(mdev))
- dev_warn(DEV, "Notified peer that I detached my disk.\n");
+ dev_warn(DEV, "Notified peer that I'm now diskless.\n");
else
- dev_err(DEV, "Sending state for detach failed\n");
-
- lc_destroy(mdev->resync);
- mdev->resync = NULL;
- lc_destroy(mdev->act_log);
- mdev->act_log = NULL;
- __no_warn(local,
- drbd_free_bc(mdev->ldev);
- mdev->ldev = NULL;);
-
- if (mdev->md_io_tmpp) {
- __free_page(mdev->md_io_tmpp);
- mdev->md_io_tmpp = NULL;
- }
+ dev_err(DEV, "Sending state for being diskless failed\n");
+ /* corresponding get_ldev in __drbd_set_state
+ * this may finaly trigger drbd_ldev_destroy. */
+ put_ldev(mdev);
}
/* Disks got bigger while they were detached */
drbd_set_defaults(mdev);
- /* for now, we do NOT yet support it,
- * even though we start some framework
- * to eventually support barriers */
- set_bit(NO_BARRIER_SUPP, &mdev->flags);
-
atomic_set(&mdev->ap_bio_cnt, 0);
atomic_set(&mdev->ap_pending_cnt, 0);
atomic_set(&mdev->rs_pending_cnt, 0);
drbd_thread_init(mdev, &mdev->asender, drbd_asender);
mdev->agreed_pro_version = PRO_VERSION_MAX;
- mdev->write_ordering = WO_bio_barrier;
+ mdev->write_ordering = WO_bdev_flush;
mdev->resync_wenr = LC_FREE;
}
D_ASSERT(list_empty(&mdev->resync_work.list));
D_ASSERT(list_empty(&mdev->unplug_work.list));
D_ASSERT(list_empty(&mdev->go_diskless.list));
-
}
get_random_bytes(&val, sizeof(u64));
_drbd_uuid_set(mdev, UI_CURRENT, val);
+ /* get it to stable storage _now_ */
+ drbd_md_sync(mdev);
}
void drbd_uuid_set_bm(struct drbd_conf *mdev, u64 val) __must_hold(local)
return 1;
}
+void drbd_ldev_destroy(struct drbd_conf *mdev)
+{
+ lc_destroy(mdev->resync);
+ mdev->resync = NULL;
+ lc_destroy(mdev->act_log);
+ mdev->act_log = NULL;
+ __no_warn(local,
+ drbd_free_bc(mdev->ldev);
+ mdev->ldev = NULL;);
+
+ if (mdev->md_io_tmpp) {
+ __free_page(mdev->md_io_tmpp);
+ mdev->md_io_tmpp = NULL;
+ }
+ clear_bit(GO_DISKLESS, &mdev->flags);
+}
+
static int w_go_diskless(struct drbd_conf *mdev, struct drbd_work *w, int unused)
{
D_ASSERT(mdev->state.disk == D_FAILED);
/* we cannot assert local_cnt == 0 here, as get_ldev_if_state will
* inc/dec it frequently. Once we are D_DISKLESS, no one will touch
- * the protected members anymore, though, so in the after_state_ch work
- * it will be safe to free them. */
+ * the protected members anymore, though, so once put_ldev reaches zero
+ * again, it will be safe to free them. */
drbd_force_state(mdev, NS(disk, D_DISKLESS));
- /* We need to wait for return of references checked out while we still
- * have been D_FAILED, though (drbd_md_sync, bitmap io). */
- wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
-
- clear_bit(GO_DISKLESS, &mdev->flags);
return 1;
}
D_ASSERT(mdev->state.disk == D_FAILED);
if (!test_and_set_bit(GO_DISKLESS, &mdev->flags))
drbd_queue_work(&mdev->data.work, &mdev->go_diskless);
- /* don't drbd_queue_work_front,
- * we need to serialize with the after_state_ch work
- * of the -> D_FAILED transition. */
}
/**
retcode = ERR_DISK_CONFIGURED;
goto fail;
}
+ /* It may just now have detached because of IO error. Make sure
+ * drbd_ldev_destroy is done already, we may end up here very fast,
+ * e.g. if someone calls attach from the on-io-error handler,
+ * to realize a "hot spare" feature (not that I'd recommend that) */
+ wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
/* allocation not in the IO path, cqueue thread context */
nbc = kzalloc(sizeof(struct drbd_backing_dev), GFP_KERNEL);
/* Reset the "barriers don't work" bits here, then force meta data to
* be written, to ensure we determine if barriers are supported. */
if (nbc->dc.no_md_flush)
- set_bit(MD_NO_BARRIER, &mdev->flags);
+ set_bit(MD_NO_FUA, &mdev->flags);
else
- clear_bit(MD_NO_BARRIER, &mdev->flags);
+ clear_bit(MD_NO_FUA, &mdev->flags);
/* Point of no return reached.
* Devices and memory are no longer released by error cleanup below.
nbc = NULL;
resync_lru = NULL;
- mdev->write_ordering = WO_bio_barrier;
- drbd_bump_write_ordering(mdev, WO_bio_barrier);
+ mdev->write_ordering = WO_bdev_flush;
+ drbd_bump_write_ordering(mdev, WO_bdev_flush);
if (drbd_md_test_flag(mdev->ldev, MDF_CRASHED_PRIMARY))
set_bit(CRASHED_PRIMARY, &mdev->flags);
force_diskless_dec:
put_ldev(mdev);
force_diskless:
- drbd_force_state(mdev, NS(disk, D_DISKLESS));
+ drbd_force_state(mdev, NS(disk, D_FAILED));
drbd_md_sync(mdev);
release_bdev2_fail:
if (nbc)
return 0;
}
+/* Detaching the disk is a process in multiple stages. First we need to lock
+ * out application IO, in-flight IO, IO stuck in drbd_al_begin_io.
+ * Then we transition to D_DISKLESS, and wait for put_ldev() to return all
+ * internal references as well.
+ * Only then we have finally detached. */
static int drbd_nl_detach(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
struct drbd_nl_cfg_reply *reply)
{
+ drbd_suspend_io(mdev); /* so no-one is stuck in drbd_al_begin_io */
reply->ret_code = drbd_request_state(mdev, NS(disk, D_DISKLESS));
+ if (mdev->state.disk == D_DISKLESS)
+ wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
+ drbd_resume_io(mdev);
return 0;
}
if (test_bit(NEW_CUR_UUID, &mdev->flags)) {
drbd_uuid_new_current(mdev);
clear_bit(NEW_CUR_UUID, &mdev->flags);
- drbd_md_sync(mdev);
}
drbd_suspend_io(mdev);
reply->ret_code = drbd_request_state(mdev, NS3(susp, 0, susp_nod, 0, susp_fen, 0));
[WO_none] = 'n',
[WO_drain_io] = 'd',
[WO_bdev_flush] = 'f',
- [WO_bio_barrier] = 'b',
};
seq_printf(seq, "version: " REL_VERSION " (api:%d/proto:%d-%d)\n%s\n",
#include "drbd_vli.h"
-struct flush_work {
- struct drbd_work w;
- struct drbd_epoch *epoch;
-};
-
enum finish_epoch {
FE_STILL_LIVE,
FE_DESTROYED,
static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *, struct drbd_epoch *, enum epoch_event);
static int e_end_block(struct drbd_conf *, struct drbd_work *, int);
-static struct drbd_epoch *previous_epoch(struct drbd_conf *mdev, struct drbd_epoch *epoch)
-{
- struct drbd_epoch *prev;
- spin_lock(&mdev->epoch_lock);
- prev = list_entry(epoch->list.prev, struct drbd_epoch, list);
- if (prev == epoch || prev == mdev->current_epoch)
- prev = NULL;
- spin_unlock(&mdev->epoch_lock);
- return prev;
-}
#define GFP_TRY (__GFP_HIGHMEM | __GFP_NOWARN)
return TRUE;
}
-static enum finish_epoch drbd_flush_after_epoch(struct drbd_conf *mdev, struct drbd_epoch *epoch)
+static void drbd_flush(struct drbd_conf *mdev)
{
int rv;
}
put_ldev(mdev);
}
-
- return drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE);
-}
-
-static int w_flush(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
-{
- struct flush_work *fw = (struct flush_work *)w;
- struct drbd_epoch *epoch = fw->epoch;
-
- kfree(w);
-
- if (!test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags))
- drbd_flush_after_epoch(mdev, epoch);
-
- drbd_may_finish_epoch(mdev, epoch, EV_PUT |
- (mdev->state.conn < C_CONNECTED ? EV_CLEANUP : 0));
-
- return 1;
}
/**
struct drbd_epoch *epoch,
enum epoch_event ev)
{
- int finish, epoch_size;
+ int epoch_size;
struct drbd_epoch *next_epoch;
- int schedule_flush = 0;
enum finish_epoch rv = FE_STILL_LIVE;
spin_lock(&mdev->epoch_lock);
do {
next_epoch = NULL;
- finish = 0;
epoch_size = atomic_read(&epoch->epoch_size);
break;
case EV_GOT_BARRIER_NR:
set_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags);
-
- /* Special case: If we just switched from WO_bio_barrier to
- WO_bdev_flush we should not finish the current epoch */
- if (test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags) && epoch_size == 1 &&
- mdev->write_ordering != WO_bio_barrier &&
- epoch == mdev->current_epoch)
- clear_bit(DE_CONTAINS_A_BARRIER, &epoch->flags);
- break;
- case EV_BARRIER_DONE:
- set_bit(DE_BARRIER_IN_NEXT_EPOCH_DONE, &epoch->flags);
break;
case EV_BECAME_LAST:
/* nothing to do*/
if (epoch_size != 0 &&
atomic_read(&epoch->active) == 0 &&
- test_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags) &&
- epoch->list.prev == &mdev->current_epoch->list &&
- !test_bit(DE_IS_FINISHING, &epoch->flags)) {
- /* Nearly all conditions are met to finish that epoch... */
- if (test_bit(DE_BARRIER_IN_NEXT_EPOCH_DONE, &epoch->flags) ||
- mdev->write_ordering == WO_none ||
- (epoch_size == 1 && test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags)) ||
- ev & EV_CLEANUP) {
- finish = 1;
- set_bit(DE_IS_FINISHING, &epoch->flags);
- } else if (!test_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags) &&
- mdev->write_ordering == WO_bio_barrier) {
- atomic_inc(&epoch->active);
- schedule_flush = 1;
- }
- }
- if (finish) {
+ test_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags)) {
if (!(ev & EV_CLEANUP)) {
spin_unlock(&mdev->epoch_lock);
drbd_send_b_ack(mdev, epoch->barrier_nr, epoch_size);
/* atomic_set(&epoch->active, 0); is already zero */
if (rv == FE_STILL_LIVE)
rv = FE_RECYCLED;
+ wake_up(&mdev->ee_wait);
}
}
spin_unlock(&mdev->epoch_lock);
- if (schedule_flush) {
- struct flush_work *fw;
- fw = kmalloc(sizeof(*fw), GFP_ATOMIC);
- if (fw) {
- fw->w.cb = w_flush;
- fw->epoch = epoch;
- drbd_queue_work(&mdev->data.work, &fw->w);
- } else {
- dev_warn(DEV, "Could not kmalloc a flush_work obj\n");
- set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags);
- /* That is not a recursion, only one level */
- drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE);
- drbd_may_finish_epoch(mdev, epoch, EV_PUT);
- }
- }
-
return rv;
}
[WO_none] = "none",
[WO_drain_io] = "drain",
[WO_bdev_flush] = "flush",
- [WO_bio_barrier] = "barrier",
};
pwo = mdev->write_ordering;
wo = min(pwo, wo);
- if (wo == WO_bio_barrier && mdev->ldev->dc.no_disk_barrier)
- wo = WO_bdev_flush;
if (wo == WO_bdev_flush && mdev->ldev->dc.no_disk_flush)
wo = WO_drain_io;
if (wo == WO_drain_io && mdev->ldev->dc.no_disk_drain)
wo = WO_none;
mdev->write_ordering = wo;
- if (pwo != mdev->write_ordering || wo == WO_bio_barrier)
+ if (pwo != mdev->write_ordering || wo == WO_bdev_flush)
dev_info(DEV, "Method to ensure write ordering: %s\n", write_ordering_str[mdev->write_ordering]);
}
bio->bi_sector = sector;
bio->bi_bdev = mdev->ldev->backing_bdev;
/* we special case some flags in the multi-bio case, see below
- * (REQ_UNPLUG, REQ_HARDBARRIER) */
+ * (REQ_UNPLUG) */
bio->bi_rw = rw;
bio->bi_private = e;
bio->bi_end_io = drbd_endio_sec;
bio->bi_rw &= ~REQ_UNPLUG;
drbd_generic_make_request(mdev, fault_type, bio);
-
- /* strip off REQ_HARDBARRIER,
- * unless it is the first or last bio */
- if (bios && bios->bi_next)
- bios->bi_rw &= ~REQ_HARDBARRIER;
} while (bios);
maybe_kick_lo(mdev);
return 0;
return -ENOMEM;
}
-/**
- * w_e_reissue() - Worker callback; Resubmit a bio, without REQ_HARDBARRIER set
- * @mdev: DRBD device.
- * @w: work object.
- * @cancel: The connection will be closed anyways (unused in this callback)
- */
-int w_e_reissue(struct drbd_conf *mdev, struct drbd_work *w, int cancel) __releases(local)
-{
- struct drbd_epoch_entry *e = (struct drbd_epoch_entry *)w;
- /* We leave DE_CONTAINS_A_BARRIER and EE_IS_BARRIER in place,
- (and DE_BARRIER_IN_NEXT_EPOCH_ISSUED in the previous Epoch)
- so that we can finish that epoch in drbd_may_finish_epoch().
- That is necessary if we already have a long chain of Epochs, before
- we realize that REQ_HARDBARRIER is actually not supported */
-
- /* As long as the -ENOTSUPP on the barrier is reported immediately
- that will never trigger. If it is reported late, we will just
- print that warning and continue correctly for all future requests
- with WO_bdev_flush */
- if (previous_epoch(mdev, e->epoch))
- dev_warn(DEV, "Write ordering was not enforced (one time event)\n");
-
- /* we still have a local reference,
- * get_ldev was done in receive_Data. */
-
- e->w.cb = e_end_block;
- if (drbd_submit_ee(mdev, e, WRITE, DRBD_FAULT_DT_WR) != 0) {
- /* drbd_submit_ee fails for one reason only:
- * if was not able to allocate sufficient bios.
- * requeue, try again later. */
- e->w.cb = w_e_reissue;
- drbd_queue_work(&mdev->data.work, &e->w);
- }
- return 1;
-}
-
static int receive_Barrier(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned int data_size)
{
- int rv, issue_flush;
+ int rv;
struct p_barrier *p = &mdev->data.rbuf.barrier;
struct drbd_epoch *epoch;
* Therefore we must send the barrier_ack after the barrier request was
* completed. */
switch (mdev->write_ordering) {
- case WO_bio_barrier:
case WO_none:
if (rv == FE_RECYCLED)
return TRUE;
- break;
+
+ /* receiver context, in the writeout path of the other node.
+ * avoid potential distributed deadlock */
+ epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
+ if (epoch)
+ break;
+ else
+ dev_warn(DEV, "Allocation of an epoch failed, slowing down\n");
+ /* Fall through */
case WO_bdev_flush:
case WO_drain_io:
- if (rv == FE_STILL_LIVE) {
- set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
- drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
- rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
- }
- if (rv == FE_RECYCLED)
- return TRUE;
-
- /* The asender will send all the ACKs and barrier ACKs out, since
- all EEs moved from the active_ee to the done_ee. We need to
- provide a new epoch object for the EEs that come in soon */
- break;
- }
-
- /* receiver context, in the writeout path of the other node.
- * avoid potential distributed deadlock */
- epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
- if (!epoch) {
- dev_warn(DEV, "Allocation of an epoch failed, slowing down\n");
- issue_flush = !test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
- if (issue_flush) {
- rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
- if (rv == FE_RECYCLED)
- return TRUE;
+ drbd_flush(mdev);
+
+ if (atomic_read(&mdev->current_epoch->epoch_size)) {
+ epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
+ if (epoch)
+ break;
}
- drbd_wait_ee_list_empty(mdev, &mdev->done_ee);
+ epoch = mdev->current_epoch;
+ wait_event(mdev->ee_wait, atomic_read(&epoch->epoch_size) == 0);
+
+ D_ASSERT(atomic_read(&epoch->active) == 0);
+ D_ASSERT(epoch->flags == 0);
return TRUE;
+ default:
+ dev_err(DEV, "Strangeness in mdev->write_ordering %d\n", mdev->write_ordering);
+ return FALSE;
}
epoch->flags = 0;
{
struct drbd_epoch_entry *e = (struct drbd_epoch_entry *)w;
sector_t sector = e->sector;
- struct drbd_epoch *epoch;
int ok = 1, pcmd;
- if (e->flags & EE_IS_BARRIER) {
- epoch = previous_epoch(mdev, e->epoch);
- if (epoch)
- drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE + (cancel ? EV_CLEANUP : 0));
- }
-
if (mdev->net_conf->wire_protocol == DRBD_PROT_C) {
if (likely((e->flags & EE_WAS_ERROR) == 0)) {
pcmd = (mdev->state.conn >= C_SYNC_SOURCE &&
e->epoch = mdev->current_epoch;
atomic_inc(&e->epoch->epoch_size);
atomic_inc(&e->epoch->active);
-
- if (mdev->write_ordering == WO_bio_barrier && atomic_read(&e->epoch->epoch_size) == 1) {
- struct drbd_epoch *epoch;
- /* Issue a barrier if we start a new epoch, and the previous epoch
- was not a epoch containing a single request which already was
- a Barrier. */
- epoch = list_entry(e->epoch->list.prev, struct drbd_epoch, list);
- if (epoch == e->epoch) {
- set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags);
- rw |= REQ_HARDBARRIER;
- e->flags |= EE_IS_BARRIER;
- } else {
- if (atomic_read(&epoch->epoch_size) > 1 ||
- !test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags)) {
- set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags);
- set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags);
- rw |= REQ_HARDBARRIER;
- e->flags |= EE_IS_BARRIER;
- }
- }
- }
spin_unlock(&mdev->epoch_lock);
dp_flags = be32_to_cpu(p->dp_flags);
break;
}
- if (mdev->state.pdsk == D_DISKLESS) {
+ if (mdev->state.pdsk < D_INCONSISTENT) {
/* In case we have the only disk of the cluster, */
drbd_set_out_of_sync(mdev, e->sector, e->size);
e->flags |= EE_CALL_AL_COMPLETE_IO;
+ e->flags &= ~EE_MAY_SET_IN_SYNC;
drbd_al_begin_io(mdev, e->sector);
}
if (ns.conn == C_MASK) {
ns.conn = C_CONNECTED;
if (mdev->state.disk == D_NEGOTIATING) {
- drbd_force_state(mdev, NS(disk, D_DISKLESS));
+ drbd_force_state(mdev, NS(disk, D_FAILED));
} else if (peer_state.disk == D_NEGOTIATING) {
dev_err(DEV, "Disk attach process on the peer node was aborted.\n");
peer_state.disk = D_DISKLESS;
if (!hlist_unhashed(&req->colision))
hlist_del(&req->colision);
else
- D_ASSERT((s & RQ_NET_MASK) == 0);
+ D_ASSERT((s & (RQ_NET_MASK & ~RQ_NET_DONE)) == 0);
/* for writes we need to do some extra housekeeping */
if (rw == WRITE)
mdev->state.conn >= C_CONNECTED));
if (!(local || remote) && !is_susp(mdev->state)) {
- dev_err(DEV, "IO ERROR: neither local nor remote disk\n");
+ if (__ratelimit(&drbd_ratelimit_state))
+ dev_err(DEV, "IO ERROR: neither local nor remote disk\n");
goto fail_free_complete;
}
if (local) {
req->private_bio->bi_bdev = mdev->ldev->backing_bdev;
- if (FAULT_ACTIVE(mdev, rw == WRITE ? DRBD_FAULT_DT_WR
- : rw == READ ? DRBD_FAULT_DT_RD
- : DRBD_FAULT_DT_RA))
+ /* State may have changed since we grabbed our reference on the
+ * mdev->ldev member. Double check, and short-circuit to endio.
+ * In case the last activity log transaction failed to get on
+ * stable storage, and this is a WRITE, we may not even submit
+ * this bio. */
+ if (get_ldev(mdev)) {
+ if (FAULT_ACTIVE(mdev, rw == WRITE ? DRBD_FAULT_DT_WR
+ : rw == READ ? DRBD_FAULT_DT_RD
+ : DRBD_FAULT_DT_RA))
+ bio_endio(req->private_bio, -EIO);
+ else
+ generic_make_request(req->private_bio);
+ put_ldev(mdev);
+ } else
bio_endio(req->private_bio, -EIO);
- else
- generic_make_request(req->private_bio);
}
/* we need to plug ALWAYS since we possibly need to kick lo_dev.
return 0;
}
- /* Reject barrier requests if we know the underlying device does
- * not support them.
- * XXX: Need to get this info from peer as well some how so we
- * XXX: reject if EITHER side/data/metadata area does not support them.
- *
- * because of those XXX, this is not yet enabled,
- * i.e. in drbd_init_set_defaults we set the NO_BARRIER_SUPP bit.
- */
- if (unlikely(bio->bi_rw & REQ_HARDBARRIER) && test_bit(NO_BARRIER_SUPP, &mdev->flags)) {
- /* dev_warn(DEV, "Rejecting barrier request as underlying device does not support\n"); */
- bio_endio(bio, -EOPNOTSUPP);
- return 0;
- }
-
/*
* what we "blindly" assume:
*/
put_ldev(mdev);
}
-static int is_failed_barrier(int ee_flags)
-{
- return (ee_flags & (EE_IS_BARRIER|EE_WAS_ERROR|EE_RESUBMITTED))
- == (EE_IS_BARRIER|EE_WAS_ERROR);
-}
-
/* writes on behalf of the partner, or resync writes,
* "submitted" by the receiver, final stage. */
static void drbd_endio_write_sec_final(struct drbd_epoch_entry *e) __releases(local)
int is_syncer_req;
int do_al_complete_io;
- /* if this is a failed barrier request, disable use of barriers,
- * and schedule for resubmission */
- if (is_failed_barrier(e->flags)) {
- drbd_bump_write_ordering(mdev, WO_bdev_flush);
- spin_lock_irqsave(&mdev->req_lock, flags);
- list_del(&e->w.list);
- e->flags = (e->flags & ~EE_WAS_ERROR) | EE_RESUBMITTED;
- e->w.cb = w_e_reissue;
- /* put_ldev actually happens below, once we come here again. */
- __release(local);
- spin_unlock_irqrestore(&mdev->req_lock, flags);
- drbd_queue_work(&mdev->data.work, &e->w);
- return;
- }
-
D_ASSERT(e->block_id != ID_VACANT);
/* after we moved e to done_ee,
drbd_md_sync(mdev);
if (test_and_clear_bit(WRITE_BM_AFTER_RESYNC, &mdev->flags)) {
- dev_warn(DEV, "Writing the whole bitmap, due to failed kmalloc\n");
+ dev_info(DEV, "Writing the whole bitmap\n");
drbd_queue_bitmap_io(mdev, &drbd_bm_write, NULL, "write from resync_finished");
}
if (bio_rw(bio) == WRITE) {
struct file *file = lo->lo_backing_file;
- /* REQ_HARDBARRIER is deprecated */
- if (bio->bi_rw & REQ_HARDBARRIER) {
- ret = -EOPNOTSUPP;
- goto out;
- }
-
if (bio->bi_rw & REQ_FLUSH) {
ret = vfs_fsync(file, 0);
if (unlikely(ret && ret != -EINVAL)) {
ring_req->operation = rq_data_dir(req) ?
BLKIF_OP_WRITE : BLKIF_OP_READ;
- if (req->cmd_flags & REQ_HARDBARRIER)
- ring_req->operation = BLKIF_OP_WRITE_BARRIER;
ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
unsigned int gfdt = flags & AGP_USER_CACHED_MEMORY_GFDT;
u32 pte_flags;
- if (type_mask == AGP_USER_UNCACHED_MEMORY)
+ if (type_mask == AGP_USER_MEMORY)
pte_flags = GEN6_PTE_UNCACHED | I810_PTE_VALID;
else if (type_mask == AGP_USER_CACHED_MEMORY_LLC_MLC) {
- pte_flags = GEN6_PTE_LLC | I810_PTE_VALID;
+ pte_flags = GEN6_PTE_LLC_MLC | I810_PTE_VALID;
if (gfdt)
pte_flags |= GEN6_PTE_GFDT;
} else { /* set 'normal'/'cached' to LLC by default */
- pte_flags = GEN6_PTE_LLC_MLC | I810_PTE_VALID;
+ pte_flags = GEN6_PTE_LLC | I810_PTE_VALID;
if (gfdt)
pte_flags |= GEN6_PTE_GFDT;
}
{
struct async_struct * info = tty->driver_data;
struct async_icount cprev, cnow; /* kernel counter temps */
- struct serial_icounter_struct icount;
void __user *argp = (void __user *)arg;
unsigned long flags;
unsigned int cmd, unsigned long arg)
{
struct port *port = tty->driver_data;
- void __user *argp = (void __user *)arg;
int rval = -ENOIOCTLCMD;
DBG1("******** IOCTL, cmd: %d", cmd);
.hangup = mgslpc_hangup,
.tiocmget = tiocmget,
.tiocmset = tiocmset,
+ .get_icount = mgslpc_get_icount,
.proc_fops = &mgslpc_proc_fops,
};
struct drm_crtc *tmp;
int crtc_mask = 1;
- WARN(!crtc, "checking null crtc?");
+ WARN(!crtc, "checking null crtc?\n");
dev = crtc->dev;
.addr = DDC_ADDR,
.flags = I2C_M_RD,
.len = len,
- .buf = buf + start,
+ .buf = buf,
}
};
static u8 *
drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
{
- int i, j = 0;
+ int i, j = 0, valid_extensions = 0;
u8 *block, *new;
if ((block = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
for (j = 1; j <= block[0x7e]; j++) {
for (i = 0; i < 4; i++) {
- if (drm_do_probe_ddc_edid(adapter, block, j,
- EDID_LENGTH))
+ if (drm_do_probe_ddc_edid(adapter,
+ block + (valid_extensions + 1) * EDID_LENGTH,
+ j, EDID_LENGTH))
goto out;
- if (drm_edid_block_valid(block + j * EDID_LENGTH))
+ if (drm_edid_block_valid(block + (valid_extensions + 1) * EDID_LENGTH)) {
+ valid_extensions++;
break;
+ }
}
if (i == 4)
- goto carp;
+ dev_warn(connector->dev->dev,
+ "%s: Ignoring invalid EDID block %d.\n",
+ drm_get_connector_name(connector), j);
+ }
+
+ if (valid_extensions != block[0x7e]) {
+ block[EDID_LENGTH-1] += block[0x7e] - valid_extensions;
+ block[0x7e] = valid_extensions;
+ new = krealloc(block, (valid_extensions + 1) * EDID_LENGTH, GFP_KERNEL);
+ if (!new)
+ goto out;
+ block = new;
}
return block;
module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
unsigned int i915_powersave = 1;
-module_param_named(powersave, i915_powersave, int, 0400);
+module_param_named(powersave, i915_powersave, int, 0600);
unsigned int i915_lvds_downclock = 0;
module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
#define INTEL_PCH_TYPE(dev) (((struct drm_i915_private *)(dev)->dev_private)->pch_type)
#define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT)
+#define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX)
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
static int i915_ring_idle(struct drm_device *dev,
struct intel_ring_buffer *ring)
{
- if (list_empty(&ring->gpu_write_list))
+ if (list_empty(&ring->gpu_write_list) && list_empty(&ring->active_list))
return 0;
i915_gem_flush_ring(dev, NULL, ring,
int ret;
lists_empty = (list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->render_ring.active_list) &&
- list_empty(&dev_priv->bsd_ring.active_list) &&
- list_empty(&dev_priv->blt_ring.active_list));
+ list_empty(&dev_priv->mm.active_list));
if (lists_empty)
return 0;
* write domain
*/
if (obj->write_domain &&
- obj->write_domain != obj->pending_read_domains) {
+ (obj->write_domain != obj->pending_read_domains ||
+ obj_priv->ring != ring)) {
flush_domains |= obj->write_domain;
invalidate_domains |=
obj->pending_read_domains & ~obj->write_domain;
return 0;
}
+static int
+i915_gem_execbuffer_move_to_gpu(struct drm_device *dev,
+ struct drm_file *file,
+ struct intel_ring_buffer *ring,
+ struct drm_gem_object **objects,
+ int count)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int ret, i;
+
+ /* Zero the global flush/invalidate flags. These
+ * will be modified as new domains are computed
+ * for each object
+ */
+ dev->invalidate_domains = 0;
+ dev->flush_domains = 0;
+ dev_priv->mm.flush_rings = 0;
+ for (i = 0; i < count; i++)
+ i915_gem_object_set_to_gpu_domain(objects[i], ring);
+
+ if (dev->invalidate_domains | dev->flush_domains) {
+#if WATCH_EXEC
+ DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
+ __func__,
+ dev->invalidate_domains,
+ dev->flush_domains);
+#endif
+ i915_gem_flush(dev, file,
+ dev->invalidate_domains,
+ dev->flush_domains,
+ dev_priv->mm.flush_rings);
+ }
+
+ for (i = 0; i < count; i++) {
+ struct drm_i915_gem_object *obj = to_intel_bo(objects[i]);
+ /* XXX replace with semaphores */
+ if (obj->ring && ring != obj->ring) {
+ ret = i915_gem_object_wait_rendering(&obj->base, true);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
/* Throttle our rendering by waiting until the ring has completed our requests
* emitted over 20 msec ago.
*
goto err;
}
- /* Zero the global flush/invalidate flags. These
- * will be modified as new domains are computed
- * for each object
- */
- dev->invalidate_domains = 0;
- dev->flush_domains = 0;
- dev_priv->mm.flush_rings = 0;
-
- for (i = 0; i < args->buffer_count; i++) {
- struct drm_gem_object *obj = object_list[i];
-
- /* Compute new gpu domains and update invalidate/flush */
- i915_gem_object_set_to_gpu_domain(obj, ring);
- }
-
- if (dev->invalidate_domains | dev->flush_domains) {
-#if WATCH_EXEC
- DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
- __func__,
- dev->invalidate_domains,
- dev->flush_domains);
-#endif
- i915_gem_flush(dev, file,
- dev->invalidate_domains,
- dev->flush_domains,
- dev_priv->mm.flush_rings);
- }
+ ret = i915_gem_execbuffer_move_to_gpu(dev, file, ring,
+ object_list, args->buffer_count);
+ if (ret)
+ goto err;
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
alignment = i915_gem_get_gtt_alignment(obj);
if (obj_priv->gtt_offset & (alignment - 1)) {
WARN(obj_priv->pin_count,
- "bo is already pinned with incorrect alignment:"
- " offset=%x, req.alignment=%x\n",
+ "bo is already pinned with incorrect alignment: offset=%x, req.alignment=%x\n",
obj_priv->gtt_offset, alignment);
ret = i915_gem_object_unbind(obj);
if (ret)
struct drm_file *file_priv)
{
struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
- void *obj_addr;
- int ret;
- char __user *user_data;
+ void *vaddr = obj_priv->phys_obj->handle->vaddr + args->offset;
+ char __user *user_data = (char __user *) (uintptr_t) args->data_ptr;
- user_data = (char __user *) (uintptr_t) args->data_ptr;
- obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset;
+ DRM_DEBUG_DRIVER("vaddr %p, %lld\n", vaddr, args->size);
- DRM_DEBUG_DRIVER("obj_addr %p, %lld\n", obj_addr, args->size);
- ret = copy_from_user(obj_addr, user_data, args->size);
- if (ret)
- return -EFAULT;
+ if (__copy_from_user_inatomic_nocache(vaddr, user_data, args->size)) {
+ unsigned long unwritten;
+
+ /* The physical object once assigned is fixed for the lifetime
+ * of the obj, so we can safely drop the lock and continue
+ * to access vaddr.
+ */
+ mutex_unlock(&dev->struct_mutex);
+ unwritten = copy_from_user(vaddr, user_data, args->size);
+ mutex_lock(&dev->struct_mutex);
+ if (unwritten)
+ return -EFAULT;
+ }
drm_agp_chipset_flush(dev);
return 0;
int lists_empty;
lists_empty = list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->render_ring.active_list) &&
- list_empty(&dev_priv->bsd_ring.active_list) &&
- list_empty(&dev_priv->blt_ring.active_list);
+ list_empty(&dev_priv->mm.active_list);
return !lists_empty;
}
lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->render_ring.active_list) &&
- list_empty(&dev_priv->bsd_ring.active_list) &&
- list_empty(&dev_priv->blt_ring.active_list));
+ list_empty(&dev_priv->mm.active_list));
if (lists_empty)
return -ENOSPC;
lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->render_ring.active_list) &&
- list_empty(&dev_priv->bsd_ring.active_list) &&
- list_empty(&dev_priv->blt_ring.active_list));
+ list_empty(&dev_priv->mm.active_list));
BUG_ON(!lists_empty);
return 0;
/* Clock gating state */
intel_init_clock_gating(dev);
- if (HAS_PCH_SPLIT(dev))
+ if (HAS_PCH_SPLIT(dev)) {
ironlake_enable_drps(dev);
+ intel_init_emon(dev);
+ }
/* Cache mode state */
I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000);
udelay(500);
}
+static void intel_fdi_normal_train(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ u32 reg, temp;
+
+ /* enable normal train */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
+ I915_WRITE(reg, temp);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ if (HAS_PCH_CPT(dev)) {
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp |= FDI_LINK_TRAIN_NORMAL_CPT;
+ } else {
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_NONE;
+ }
+ I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
+
+ /* wait one idle pattern time */
+ POSTING_READ(reg);
+ udelay(1000);
+}
+
/* The FDI link training functions for ILK/Ibexpeak. */
static void ironlake_fdi_link_train(struct drm_crtc *crtc)
{
DRM_DEBUG_KMS("FDI train done\n");
- /* enable normal train */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
- I915_WRITE(reg, temp);
-
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- if (HAS_PCH_CPT(dev)) {
- temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
- temp |= FDI_LINK_TRAIN_NORMAL_CPT;
- } else {
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_NONE;
- }
- I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
-
- /* wait one idle pattern time */
- POSTING_READ(reg);
- udelay(1000);
}
static const int const snb_b_fdi_train_param [] = {
I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe)));
+ intel_fdi_normal_train(crtc);
+
/* For PCH DP, enable TRANS_DP_CTL */
if (HAS_PCH_CPT(dev) &&
intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
udelay(100);
/* Ironlake workaround, disable clock pointer after downing FDI */
- I915_WRITE(FDI_RX_CHICKEN(pipe),
- I915_READ(FDI_RX_CHICKEN(pipe) &
- ~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
+ if (HAS_PCH_IBX(dev))
+ I915_WRITE(FDI_RX_CHICKEN(pipe),
+ I915_READ(FDI_RX_CHICKEN(pipe) &
+ ~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
/* still set train pattern 1 */
reg = FDI_TX_CTL(pipe);
fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
MEMMODE_FSTART_SHIFT;
- fstart = fmax;
vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
PXVFREQ_PX_SHIFT;
- dev_priv->fmax = fstart; /* IPS callback will increase this */
+ dev_priv->fmax = fmax; /* IPS callback will increase this */
dev_priv->fstart = fstart;
- dev_priv->max_delay = fmax;
+ dev_priv->max_delay = fstart;
dev_priv->min_delay = fmin;
dev_priv->cur_delay = fstart;
- DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n", fmax, fmin,
- fstart);
+ DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n",
+ fmax, fmin, fstart);
I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
status = connector_status_connected;
}
- return bit;
+ return status;
}
/**
extern void intel_init_clock_gating(struct drm_device *dev);
extern void ironlake_enable_drps(struct drm_device *dev);
extern void ironlake_disable_drps(struct drm_device *dev);
+extern void intel_init_emon(struct drm_device *dev);
extern int intel_pin_and_fence_fb_obj(struct drm_device *dev,
struct drm_gem_object *obj,
struct drm_device *dev = connector->dev;
struct drm_display_mode *mode;
- if (intel_lvds->edid) {
- drm_mode_connector_update_edid_property(connector,
- intel_lvds->edid);
+ if (intel_lvds->edid)
return drm_add_edid_modes(connector, intel_lvds->edid);
- }
mode = drm_mode_duplicate(dev, intel_lvds->fixed_mode);
if (mode == 0)
*/
intel_lvds->edid = drm_get_edid(connector,
&dev_priv->gmbus[pin].adapter);
-
+ if (intel_lvds->edid) {
+ if (drm_add_edid_modes(connector,
+ intel_lvds->edid)) {
+ drm_mode_connector_update_edid_property(connector,
+ intel_lvds->edid);
+ } else {
+ kfree(intel_lvds->edid);
+ intel_lvds->edid = NULL;
+ }
+ }
if (!intel_lvds->edid) {
/* Didn't get an EDID, so
* Set wide sync ranges so we get all modes
return 0;
err_out:
- iounmap(opregion->header);
+ iounmap(base);
return err;
}
{
int uv_hscale = uv_hsubsampling(rec->flags);
int uv_vscale = uv_vsubsampling(rec->flags);
- u32 stride_mask, depth, tmp;
+ u32 stride_mask;
+ int depth;
+ u32 tmp;
/* check src dimensions */
if (IS_845G(dev) || IS_I830(dev)) {
I915_WRITE_CTL(ring,
((ring->gem_object->size - PAGE_SIZE) & RING_NR_PAGES)
- | RING_NO_REPORT | RING_VALID);
+ | RING_REPORT_64K | RING_VALID);
head = I915_READ_HEAD(ring) & HEAD_ADDR;
/* If the head is still not zero, the ring is dead */
i915_gem_object_unpin(ring->gem_object);
drm_gem_object_unreference(ring->gem_object);
ring->gem_object = NULL;
+
+ if (ring->cleanup)
+ ring->cleanup(ring);
+
cleanup_status_page(dev, ring);
}
{
unsigned long end;
drm_i915_private_t *dev_priv = dev->dev_private;
+ u32 head;
+
+ head = intel_read_status_page(ring, 4);
+ if (head) {
+ ring->head = head & HEAD_ADDR;
+ ring->space = ring->head - (ring->tail + 8);
+ if (ring->space < 0)
+ ring->space += ring->size;
+ if (ring->space >= n)
+ return 0;
+ }
trace_i915_ring_wait_begin (dev);
end = jiffies + 3 * HZ;
/* do nothing */
}
+
+/* Workaround for some stepping of SNB,
+ * each time when BLT engine ring tail moved,
+ * the first command in the ring to be parsed
+ * should be MI_BATCH_BUFFER_START
+ */
+#define NEED_BLT_WORKAROUND(dev) \
+ (IS_GEN6(dev) && (dev->pdev->revision < 8))
+
+static inline struct drm_i915_gem_object *
+to_blt_workaround(struct intel_ring_buffer *ring)
+{
+ return ring->private;
+}
+
+static int blt_ring_init(struct drm_device *dev,
+ struct intel_ring_buffer *ring)
+{
+ if (NEED_BLT_WORKAROUND(dev)) {
+ struct drm_i915_gem_object *obj;
+ u32 __iomem *ptr;
+ int ret;
+
+ obj = to_intel_bo(i915_gem_alloc_object(dev, 4096));
+ if (obj == NULL)
+ return -ENOMEM;
+
+ ret = i915_gem_object_pin(&obj->base, 4096);
+ if (ret) {
+ drm_gem_object_unreference(&obj->base);
+ return ret;
+ }
+
+ ptr = kmap(obj->pages[0]);
+ iowrite32(MI_BATCH_BUFFER_END, ptr);
+ iowrite32(MI_NOOP, ptr+1);
+ kunmap(obj->pages[0]);
+
+ ret = i915_gem_object_set_to_gtt_domain(&obj->base, false);
+ if (ret) {
+ i915_gem_object_unpin(&obj->base);
+ drm_gem_object_unreference(&obj->base);
+ return ret;
+ }
+
+ ring->private = obj;
+ }
+
+ return init_ring_common(dev, ring);
+}
+
+static void blt_ring_begin(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ int num_dwords)
+{
+ if (ring->private) {
+ intel_ring_begin(dev, ring, num_dwords+2);
+ intel_ring_emit(dev, ring, MI_BATCH_BUFFER_START);
+ intel_ring_emit(dev, ring, to_blt_workaround(ring)->gtt_offset);
+ } else
+ intel_ring_begin(dev, ring, 4);
+}
+
+static void blt_ring_flush(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ u32 invalidate_domains,
+ u32 flush_domains)
+{
+ blt_ring_begin(dev, ring, 4);
+ intel_ring_emit(dev, ring, MI_FLUSH_DW);
+ intel_ring_emit(dev, ring, 0);
+ intel_ring_emit(dev, ring, 0);
+ intel_ring_emit(dev, ring, 0);
+ intel_ring_advance(dev, ring);
+}
+
+static u32
+blt_ring_add_request(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ u32 flush_domains)
+{
+ u32 seqno = i915_gem_get_seqno(dev);
+
+ blt_ring_begin(dev, ring, 4);
+ intel_ring_emit(dev, ring, MI_STORE_DWORD_INDEX);
+ intel_ring_emit(dev, ring,
+ I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+ intel_ring_emit(dev, ring, seqno);
+ intel_ring_emit(dev, ring, MI_USER_INTERRUPT);
+ intel_ring_advance(dev, ring);
+
+ DRM_DEBUG_DRIVER("%s %d\n", ring->name, seqno);
+ return seqno;
+}
+
+static void blt_ring_cleanup(struct intel_ring_buffer *ring)
+{
+ if (!ring->private)
+ return;
+
+ i915_gem_object_unpin(ring->private);
+ drm_gem_object_unreference(ring->private);
+ ring->private = NULL;
+}
+
static const struct intel_ring_buffer gen6_blt_ring = {
.name = "blt ring",
.id = RING_BLT,
.mmio_base = BLT_RING_BASE,
.size = 32 * PAGE_SIZE,
- .init = init_ring_common,
+ .init = blt_ring_init,
.write_tail = ring_write_tail,
- .flush = gen6_ring_flush,
- .add_request = ring_add_request,
+ .flush = blt_ring_flush,
+ .add_request = blt_ring_add_request,
.get_seqno = ring_status_page_get_seqno,
.user_irq_get = blt_ring_get_user_irq,
.user_irq_put = blt_ring_put_user_irq,
.dispatch_gem_execbuffer = gen6_ring_dispatch_gem_execbuffer,
+ .cleanup = blt_ring_cleanup,
};
int intel_init_render_ring_buffer(struct drm_device *dev)
struct drm_i915_gem_execbuffer2 *exec,
struct drm_clip_rect *cliprects,
uint64_t exec_offset);
+ void (*cleanup)(struct intel_ring_buffer *ring);
/**
* List of objects currently involved in rendering from the
wait_queue_head_t irq_queue;
drm_local_map_t map;
+
+ void *private;
};
static inline u32
u32 grbm_int_cntl = 0;
if (!rdev->irq.installed) {
- WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
return -EINVAL;
}
/* don't enable anything if the ih is disabled */
case 0: /* D1 vblank */
if (disp_int & LB_D1_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 0);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int &= ~LB_D1_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D1 vblank\n");
case 0: /* D2 vblank */
if (disp_int_cont & LB_D2_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 1);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont &= ~LB_D2_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D2 vblank\n");
case 0: /* D3 vblank */
if (disp_int_cont2 & LB_D3_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 2);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont2 &= ~LB_D3_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D3 vblank\n");
case 0: /* D4 vblank */
if (disp_int_cont3 & LB_D4_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 3);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont3 &= ~LB_D4_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D4 vblank\n");
case 0: /* D5 vblank */
if (disp_int_cont4 & LB_D5_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 4);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont4 &= ~LB_D5_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D5 vblank\n");
case 0: /* D6 vblank */
if (disp_int_cont5 & LB_D6_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 5);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont5 &= ~LB_D6_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D6 vblank\n");
int r;
if (rdev->gart.table.ram.ptr) {
- WARN(1, "R100 PCI GART already initialized.\n");
+ WARN(1, "R100 PCI GART already initialized\n");
return 0;
}
/* Initialize common gart structure */
uint32_t tmp = 0;
if (!rdev->irq.installed) {
- WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
WREG32(R_000040_GEN_INT_CNTL, 0);
return -EINVAL;
}
int r;
if (rdev->gart.table.vram.robj) {
- WARN(1, "RV370 PCIE GART already initialized.\n");
+ WARN(1, "RV370 PCIE GART already initialized\n");
return 0;
}
/* Initialize common gart structure */
{
u32 temp = (RREG32(CG_THERMAL_STATUS) & ASIC_T_MASK) >>
ASIC_T_SHIFT;
- u32 actual_temp = 0;
- if ((temp >> 7) & 1)
- actual_temp = 0;
- else
- actual_temp = (temp >> 1) & 0xff;
-
- return actual_temp * 1000;
+ return temp * 1000;
}
void r600_pm_get_dynpm_state(struct radeon_device *rdev)
int r;
if (rdev->gart.table.vram.robj) {
- WARN(1, "R600 PCIE GART already initialized.\n");
+ WARN(1, "R600 PCIE GART already initialized\n");
return 0;
}
/* Initialize common gart structure */
u32 hdmi1, hdmi2;
if (!rdev->irq.installed) {
- WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
return -EINVAL;
}
/* don't enable anything if the ih is disabled */
if (crev < 2)
return false;
- router.valid = false;
-
obj_header = (ATOM_OBJECT_HEADER *) (ctx->bios + data_offset);
path_obj = (ATOM_DISPLAY_OBJECT_PATH_TABLE *)
(ctx->bios + data_offset +
if (connector_type == DRM_MODE_CONNECTOR_Unknown)
continue;
+ router.ddc_valid = false;
+ router.cd_valid = false;
for (j = 0; j < ((le16_to_cpu(path->usSize) - 8) / 2); j++) {
uint8_t grph_obj_id, grph_obj_num, grph_obj_type;
usDeviceTag));
} else if (grph_obj_type == GRAPH_OBJECT_TYPE_ROUTER) {
- router.valid = false;
for (k = 0; k < router_obj->ucNumberOfObjects; k++) {
- u16 router_obj_id = le16_to_cpu(router_obj->asObjects[j].usObjectID);
+ u16 router_obj_id = le16_to_cpu(router_obj->asObjects[k].usObjectID);
if (le16_to_cpu(path->usGraphicObjIds[j]) == router_obj_id) {
ATOM_COMMON_RECORD_HEADER *record = (ATOM_COMMON_RECORD_HEADER *)
(ctx->bios + data_offset +
ATOM_I2C_RECORD *i2c_record;
ATOM_I2C_ID_CONFIG_ACCESS *i2c_config;
ATOM_ROUTER_DDC_PATH_SELECT_RECORD *ddc_path;
+ ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD *cd_path;
ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT *router_src_dst_table =
(ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT *)
(ctx->bios + data_offset +
case ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE:
ddc_path = (ATOM_ROUTER_DDC_PATH_SELECT_RECORD *)
record;
- router.valid = true;
- router.mux_type = ddc_path->ucMuxType;
- router.mux_control_pin = ddc_path->ucMuxControlPin;
- router.mux_state = ddc_path->ucMuxState[enum_id];
+ router.ddc_valid = true;
+ router.ddc_mux_type = ddc_path->ucMuxType;
+ router.ddc_mux_control_pin = ddc_path->ucMuxControlPin;
+ router.ddc_mux_state = ddc_path->ucMuxState[enum_id];
+ break;
+ case ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE:
+ cd_path = (ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD *)
+ record;
+ router.cd_valid = true;
+ router.cd_mux_type = cd_path->ucMuxType;
+ router.cd_mux_control_pin = cd_path->ucMuxControlPin;
+ router.cd_mux_state = cd_path->ucMuxState[enum_id];
break;
}
record = (ATOM_COMMON_RECORD_HEADER *)
size_t bc_size = sizeof(*bios_connectors) * ATOM_MAX_SUPPORTED_DEVICE;
struct radeon_router router;
- router.valid = false;
+ router.ddc_valid = false;
+ router.cd_valid = false;
bios_connectors = kzalloc(bc_size, GFP_KERNEL);
if (!bios_connectors)
continue;
if (priority == true) {
- DRM_INFO("1: conflicting encoders switching off %s\n", drm_get_connector_name(conflict));
- DRM_INFO("in favor of %s\n", drm_get_connector_name(connector));
+ DRM_DEBUG_KMS("1: conflicting encoders switching off %s\n", drm_get_connector_name(conflict));
+ DRM_DEBUG_KMS("in favor of %s\n", drm_get_connector_name(connector));
conflict->status = connector_status_disconnected;
radeon_connector_update_scratch_regs(conflict, connector_status_disconnected);
} else {
- DRM_INFO("2: conflicting encoders switching off %s\n", drm_get_connector_name(connector));
- DRM_INFO("in favor of %s\n", drm_get_connector_name(conflict));
+ DRM_DEBUG_KMS("2: conflicting encoders switching off %s\n", drm_get_connector_name(connector));
+ DRM_DEBUG_KMS("in favor of %s\n", drm_get_connector_name(conflict));
current_status = connector_status_disconnected;
}
break;
mode->vdisplay == native_mode->vdisplay) {
*native_mode = *mode;
drm_mode_set_crtcinfo(native_mode, CRTC_INTERLACE_HALVE_V);
- DRM_INFO("Determined LVDS native mode details from EDID\n");
+ DRM_DEBUG_KMS("Determined LVDS native mode details from EDID\n");
break;
}
}
}
if (!native_mode->clock) {
- DRM_INFO("No LVDS native mode details, disabling RMX\n");
+ DRM_DEBUG_KMS("No LVDS native mode details, disabling RMX\n");
radeon_encoder->rmx_type = RMX_OFF;
}
}
radeon_connector->shared_ddc = true;
shared_ddc = true;
}
- if (radeon_connector->router_bus && router->valid &&
+ if (radeon_connector->router_bus && router->ddc_valid &&
(radeon_connector->router.router_id == router->router_id)) {
radeon_connector->shared_ddc = false;
shared_ddc = false;
radeon_connector->connector_object_id = connector_object_id;
radeon_connector->hpd = *hpd;
radeon_connector->router = *router;
- if (router->valid) {
+ if (router->ddc_valid || router->cd_valid) {
radeon_connector->router_bus = radeon_i2c_lookup(rdev, &router->i2c_info);
if (!radeon_connector->router_bus)
goto failed;
radeon_connector->ddc_bus->rec.en_data_reg,
radeon_connector->ddc_bus->rec.y_clk_reg,
radeon_connector->ddc_bus->rec.y_data_reg);
- if (radeon_connector->router_bus)
+ if (radeon_connector->router.ddc_valid)
DRM_INFO(" DDC Router 0x%x/0x%x\n",
- radeon_connector->router.mux_control_pin,
- radeon_connector->router.mux_state);
+ radeon_connector->router.ddc_mux_control_pin,
+ radeon_connector->router.ddc_mux_state);
+ if (radeon_connector->router.cd_valid)
+ DRM_INFO(" Clock/Data Router 0x%x/0x%x\n",
+ radeon_connector->router.cd_mux_control_pin,
+ radeon_connector->router.cd_mux_state);
} else {
if (connector->connector_type == DRM_MODE_CONNECTOR_VGA ||
connector->connector_type == DRM_MODE_CONNECTOR_DVII ||
int ret = 0;
/* on hw with routers, select right port */
- if (radeon_connector->router.valid)
- radeon_router_select_port(radeon_connector);
+ if (radeon_connector->router.ddc_valid)
+ radeon_router_select_ddc_port(radeon_connector);
if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
(radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)) {
int ret = 0;
/* on hw with routers, select right port */
- if (radeon_connector->router.valid)
- radeon_router_select_port(radeon_connector);
+ if (radeon_connector->router.ddc_valid)
+ radeon_router_select_ddc_port(radeon_connector);
if (!radeon_connector->ddc_bus)
return -1;
static void radeon_atom_encoder_prepare(struct drm_encoder *encoder)
{
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
if (radeon_encoder->active_device &
(ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) {
radeon_atom_output_lock(encoder, true);
radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+ /* select the clock/data port if it uses a router */
+ if (connector) {
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ if (radeon_connector->router.cd_valid)
+ radeon_router_select_cd_port(radeon_connector);
+ }
+
/* this is needed for the pll/ss setup to work correctly in some cases */
atombios_set_encoder_crtc_source(encoder);
}
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig;
+
+ /* check for pre-DCE3 cards with shared encoders;
+ * can't really use the links individually, so don't disable
+ * the encoder if it's in use by another connector
+ */
+ if (!ASIC_IS_DCE3(rdev)) {
+ struct drm_encoder *other_encoder;
+ struct radeon_encoder *other_radeon_encoder;
+
+ list_for_each_entry(other_encoder, &dev->mode_config.encoder_list, head) {
+ other_radeon_encoder = to_radeon_encoder(other_encoder);
+ if ((radeon_encoder->encoder_id == other_radeon_encoder->encoder_id) &&
+ drm_helper_encoder_in_use(other_encoder))
+ goto disable_done;
+ }
+ }
+
radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
switch (radeon_encoder->encoder_id) {
break;
}
+disable_done:
if (radeon_encoder_is_digital(encoder)) {
if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI)
r600_hdmi_disable(encoder);
*/
if (seq == rdev->fence_drv.last_seq && radeon_gpu_is_lockup(rdev)) {
/* good news we believe it's a lockup */
- WARN(1, "GPU lockup (waiting for 0x%08X last fence id 0x%08X)\n", fence->seq, seq);
+ WARN(1, "GPU lockup (waiting for 0x%08X last fence id 0x%08X)\n",
+ fence->seq, seq);
/* FIXME: what should we do ? marking everyone
* as signaled for now
*/
};
/* on hw with routers, select right port */
- if (radeon_connector->router.valid)
- radeon_router_select_port(radeon_connector);
+ if (radeon_connector->router.ddc_valid)
+ radeon_router_select_ddc_port(radeon_connector);
ret = i2c_transfer(&radeon_connector->ddc_bus->adapter, msgs, 2);
if (ret == 2)
addr, val);
}
-/* router switching */
-void radeon_router_select_port(struct radeon_connector *radeon_connector)
+/* ddc router switching */
+void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector)
{
u8 val;
- if (!radeon_connector->router.valid)
+ if (!radeon_connector->router.ddc_valid)
return;
radeon_i2c_get_byte(radeon_connector->router_bus,
radeon_connector->router.i2c_addr,
0x3, &val);
- val &= radeon_connector->router.mux_control_pin;
+ val &= ~radeon_connector->router.ddc_mux_control_pin;
radeon_i2c_put_byte(radeon_connector->router_bus,
radeon_connector->router.i2c_addr,
0x3, val);
radeon_i2c_get_byte(radeon_connector->router_bus,
radeon_connector->router.i2c_addr,
0x1, &val);
- val &= radeon_connector->router.mux_control_pin;
- val |= radeon_connector->router.mux_state;
+ val &= ~radeon_connector->router.ddc_mux_control_pin;
+ val |= radeon_connector->router.ddc_mux_state;
+ radeon_i2c_put_byte(radeon_connector->router_bus,
+ radeon_connector->router.i2c_addr,
+ 0x1, val);
+}
+
+/* clock/data router switching */
+void radeon_router_select_cd_port(struct radeon_connector *radeon_connector)
+{
+ u8 val;
+
+ if (!radeon_connector->router.cd_valid)
+ return;
+
+ radeon_i2c_get_byte(radeon_connector->router_bus,
+ radeon_connector->router.i2c_addr,
+ 0x3, &val);
+ val &= ~radeon_connector->router.cd_mux_control_pin;
+ radeon_i2c_put_byte(radeon_connector->router_bus,
+ radeon_connector->router.i2c_addr,
+ 0x3, val);
+ radeon_i2c_get_byte(radeon_connector->router_bus,
+ radeon_connector->router.i2c_addr,
+ 0x1, &val);
+ val &= ~radeon_connector->router.cd_mux_control_pin;
+ val |= radeon_connector->router.cd_mux_state;
radeon_i2c_put_byte(radeon_connector->router_bus,
radeon_connector->router.i2c_addr,
0x1, val);
};
struct radeon_router {
- bool valid;
u32 router_id;
struct radeon_i2c_bus_rec i2c_info;
u8 i2c_addr;
- u8 mux_type;
- u8 mux_control_pin;
- u8 mux_state;
+ /* i2c mux */
+ bool ddc_valid;
+ u8 ddc_mux_type;
+ u8 ddc_mux_control_pin;
+ u8 ddc_mux_state;
+ /* clock/data mux */
+ bool cd_valid;
+ u8 cd_mux_type;
+ u8 cd_mux_control_pin;
+ u8 cd_mux_state;
};
struct radeon_connector {
u8 slave_addr,
u8 addr,
u8 val);
-extern void radeon_router_select_port(struct radeon_connector *radeon_connector);
+extern void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector);
+extern void radeon_router_select_cd_port(struct radeon_connector *radeon_connector);
extern bool radeon_ddc_probe(struct radeon_connector *radeon_connector);
extern int radeon_ddc_get_modes(struct radeon_connector *radeon_connector);
type = ttm_bo_type_device;
}
*bo_ptr = NULL;
+
+retry:
bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL);
if (bo == NULL)
return -ENOMEM;
bo->gobj = gobj;
bo->surface_reg = -1;
INIT_LIST_HEAD(&bo->list);
-
-retry:
radeon_ttm_placement_from_domain(bo, domain);
/* Kernel allocation are uninterruptible */
mutex_lock(&rdev->vram_mutex);
gtt = container_of(backend, struct radeon_ttm_backend, backend);
gtt->offset = bo_mem->start << PAGE_SHIFT;
if (!gtt->num_pages) {
- WARN(1, "nothing to bind %lu pages for mreg %p back %p!\n", gtt->num_pages, bo_mem, backend);
+ WARN(1, "nothing to bind %lu pages for mreg %p back %p!\n",
+ gtt->num_pages, bo_mem, backend);
}
r = radeon_gart_bind(gtt->rdev, gtt->offset,
gtt->num_pages, gtt->pages);
int r;
if (rdev->gart.table.ram.ptr) {
- WARN(1, "RS400 GART already initialized.\n");
+ WARN(1, "RS400 GART already initialized\n");
return 0;
}
/* Check gart size */
int r;
if (rdev->gart.table.vram.robj) {
- WARN(1, "RS600 GART already initialized.\n");
+ WARN(1, "RS600 GART already initialized\n");
return 0;
}
/* Initialize common gart structure */
~S_007D18_DC_HOT_PLUG_DETECT2_INT_EN(1);
if (!rdev->irq.installed) {
- WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+ WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
WREG32(R_000040_GEN_INT_CNTL, 0);
return -EINVAL;
}
/*
* Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
*/
-/* Notes:
- *
- * We store bo pointer in drm_mm_node struct so we know which bo own a
- * specific node. There is no protection on the pointer, thus to make
- * sure things don't go berserk you have to access this pointer while
- * holding the global lru lock and make sure anytime you free a node you
- * reset the pointer to NULL.
- */
#include "ttm/ttm_module.h"
#include "ttm/ttm_bo_driver.h"
#include <linux/mm.h>
#include <linux/file.h>
#include <linux/module.h>
+#include <asm/atomic.h>
#define TTM_ASSERT_LOCKED(param)
#define TTM_DEBUG(fmt, arg...)
git.openpandora.org / pandora-kernel.git / commitdiff