pandora-kernel.git
15 years agoMerge commit 'v2.6.31-rc3'; commit 'tip/oprofile' into oprofile/core
Robert Richter [Tue, 14 Jul 2009 13:20:44 +0000 (15:20 +0200)]
Merge commit 'v2.6.31-rc3'; commit 'tip/oprofile' into oprofile/core

Conflicts:
drivers/oprofile/oprofile_stats.c
drivers/usb/otg/Kconfig
drivers/usb/otg/Makefile

Signed-off-by: Robert Richter <robert.richter@amd.com>
15 years agoLinux 2.6.31-rc3 v2.6.31-rc3
Linus Torvalds [Tue, 14 Jul 2009 01:18:52 +0000 (18:18 -0700)]
Linux 2.6.31-rc3

15 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Mon, 13 Jul 2009 23:39:25 +0000 (16:39 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: fix race between write_metadata_buffer and get_write_access
  ext4: Fix ext4_mb_initialize_context() to initialize all fields
  ext4: fix null handler of ioctls in no journal mode
  ext4: Fix buffer head reference leak in no-journal mode
  ext4: Move __ext4_journalled_writepage() to avoid forward declaration
  ext4: Fix mmap/truncate race when blocksize < pagesize && !nodellaoc
  ext4: Fix mmap/truncate race when blocksize < pagesize && delayed allocation
  ext4: Don't look at buffer_heads outside i_size.
  ext4: Fix goal inum check in the inode allocator
  ext4: fix no journal corruption with locale-gen
  ext4: Calculate required journal credits for inserting an extent properly
  ext4: Fix truncation of symlinks after failed write
  jbd2: Fix a race between checkpointing code and journal_get_write_access()
  ext4: Use rcu_barrier() on module unload.
  ext4: naturally align struct ext4_allocation_request
  ext4: mark several more functions in mballoc.c as noinline
  ext4: Fix potential reclaim deadlock when truncating partial block
  jbd2: Remove GFP_ATOMIC kmalloc from inside spinlock critical region
  ext4: Fix type warning on 64-bit platforms in tracing events header

15 years agojbd2: fix race between write_metadata_buffer and get_write_access
dingdinghua [Mon, 13 Jul 2009 21:55:35 +0000 (17:55 -0400)]
jbd2: fix race between write_metadata_buffer and get_write_access

The function jbd2_journal_write_metadata_buffer() calls
jbd_unlock_bh_state(bh_in) too early; this could potentially allow
another thread to call get_write_access on the buffer head, modify the
data, and dirty it, and allowing the wrong data to be written into the
journal.  Fortunately, if we lose this race, the only time this will
actually cause filesystem corruption is if there is a system crash or
other unclean shutdown of the system before the next commit can take
place.

Signed-off-by: dingdinghua <dingdinghua85@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
Linus Torvalds [Mon, 13 Jul 2009 17:24:43 +0000 (10:24 -0700)]
Merge git://git./linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: stlc45xx: convert config_interface to bss_info_changed, fixing a build error
  Staging: comedi: s626: use subvendor:subdevice ids for SAA7146 board
  Staging: prevent rtl8192su from crashing dev_ioctl in SIOCGIWNAME
  Staging: prevent rtl8187se from crashing dev_ioctl() in SIOCGIWNAME
  Staging: rtl8192su: convert to net_device_ops
  Staging: serqt_usb2: declare qt_open static in serqt_usb2
  Staging: serqt_usb2: fix qt_close parameters in serqt_usb2
  Staging: comedi: jr3_pci.c: add required includes
  Staging: meilhaus: add email address to TODO
  Staging: rspiusb: use NULL virtual address instead of a bogus one
  Staging: vt6655: compile fix
  Staging: rt2870: Add USB ID for Sitecom WL-608

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
Linus Torvalds [Mon, 13 Jul 2009 17:24:08 +0000 (10:24 -0700)]
Merge git://git./linux/kernel/git/gregkh/driver-core-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  wm97xx_batery: replace driver_data with dev_get_drvdata()
  omap: video: remove direct access of driver_data
  Sound: remove direct access of driver_data
  driver model: fix show/store prototypes in doc.
  Firmware: firmware_class, fix lock imbalance
  Driver Core: remove BUS_ID_SIZE
  sparc: remove driver-core BUS_ID_SIZE
  partitions: fix broken uevent_suppress conversion
  devres: WARN() and return, don't crash on device_del() of uninitialized device

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Mon, 13 Jul 2009 17:23:03 +0000 (10:23 -0700)]
Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (48 commits)
  USB: otg: fix module reinsert issue
  USB: handle zero-length usbfs submissions correctly
  USB: EHCI: report actual_length for iso transfers
  USB: option: remove unnecessary and erroneous code
  USB: cypress_m8: remove invalid Clear-Halt
  USB: musb_host: undo incorrect change in musb_advance_schedule()
  USB: fix LANGID=0 regression
  USB: serial: sierra driver id_table additions
  USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter.
  USB: fix race leading to a write after kfree in usbfs
  USB: Sierra: fix oops upon device close
  USB: option.c: add A-Link 3GU device id
  USB: Serial: Add support for Arkham Technology adapters
  USB: Fix option_ms regression in 2.6.31-rc2
  USB: gadget audio: select SND_PCM
  USB: ftdi: support NDI devices
  Revert USB: usbfs: deprecate and hide option for !embedded
  USB: usb.h: fix kernel-doc notation
  USB: RNDIS gadget, fix issues talking from PXA
  USB: serial: FTDI with product code FB80 and vendor id 0403
  ...

15 years agoupdate JFS entry in MAINTAINERS
Dave Kleikamp [Mon, 13 Jul 2009 16:02:24 +0000 (11:02 -0500)]
update JFS entry in MAINTAINERS

JFS hasn't really been supported for a while.  It's still maintained,
but saying it's supported is a stretch.  Updating my preferred email
address as well.

Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agomn10300: remove duplicated #include
Huang Weiyi [Mon, 13 Jul 2009 14:09:25 +0000 (15:09 +0100)]
mn10300: remove duplicated #include

Remove duplicated #include('s) in
  arch/mn10300/kernel/sys_mn10300.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoFix staging drivers after smp_lock.h redux
Jean Delvare [Mon, 13 Jul 2009 10:39:05 +0000 (12:39 +0200)]
Fix staging drivers after smp_lock.h redux

Commit 405f55712dfe464b3240d7816cc4fe4174831be2 ("headers: smp_lock.h
redux") broke the build of two staging drivers. Fix them.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoext4: Fix ext4_mb_initialize_context() to initialize all fields
Theodore Ts'o [Mon, 13 Jul 2009 13:45:52 +0000 (09:45 -0400)]
ext4: Fix ext4_mb_initialize_context() to initialize all fields

Pavel Roskin pointed out that kmemcheck indicated that
ext4_mb_store_history() was accessing uninitialized values of
ac->ac_tail and ac->ac_buddy leading to garbage in the mballoc
history.  Fix this by initializing the entire structure to all zeros
first.

Also, two fields were getting doubly initialized by the caller of
ext4_mb_initialize_context, so remove them for efficiency's sake.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
15 years agoext4: fix null handler of ioctls in no journal mode
Peng Tao [Mon, 13 Jul 2009 13:30:17 +0000 (09:30 -0400)]
ext4: fix null handler of ioctls in no journal mode

The EXT4_IOC_GROUP_ADD and EXT4_IOC_GROUP_EXTEND ioctls should not
flush the journal in no_journal mode.  Otherwise, running resize2fs on
a mounted no_journal partition triggers the following error messages:

BUG: unable to handle kernel NULL pointer dereference at 00000014
IP: [<c039d282>] _spin_lock+0x8/0x19
*pde = 00000000
Oops: 0002 [#1] SMP

Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
15 years agoext4: Fix buffer head reference leak in no-journal mode
Curt Wohlgemuth [Mon, 13 Jul 2009 13:07:20 +0000 (09:07 -0400)]
ext4: Fix buffer head reference leak in no-journal mode

We found a problem with buffer head reference leaks when using an ext4
partition without a journal.  In particular, calls to ext4_forget() would
not to a brelse() on the input buffer head, which will cause pages they
belong to to not be reclaimable.

Further investigation showed that all places where ext4_journal_forget() and
ext4_journal_revoke() are called are subject to the same problem.  The patch
below changes __ext4_journal_forget/__ext4_journal_revoke to do an explicit
release of the buffer head when the journal handle isn't valid.

Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
15 years agoUSB: otg: fix module reinsert issue
Ajay Kumar Gupta [Fri, 3 Jul 2009 07:48:45 +0000 (13:18 +0530)]
USB: otg: fix module reinsert issue

Platform_device instance (pd) is not set to NULL in
usb_nop_xceiv_unregister() causing usb_nop_xceiv_register()
to fail during module reinsert.

From: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Babu Ravi <ravibabu@ti.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
15 years agoUSB: handle zero-length usbfs submissions correctly
Alan Stern [Mon, 29 Jun 2009 15:04:54 +0000 (11:04 -0400)]
USB: handle zero-length usbfs submissions correctly

This patch (as1262) fixes a bug in usbfs: It refuses to accept
zero-length transfers, and it insists that the buffer pointer be valid
even if there is no data being transferred.

The patch also consolidates a bunch of repetitive access_ok() checks
into a single check, which incidentally fixes the lack of such a check
for Isochronous URBs.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: EHCI: report actual_length for iso transfers
Alan Stern [Mon, 29 Jun 2009 18:34:59 +0000 (14:34 -0400)]
USB: EHCI: report actual_length for iso transfers

This patch (as1259b) makes ehci-hcd return the total number of bytes
transferred in urb->actual_length for Isochronous transfers.
Until now, the actual_length value was unaccountably left at 0.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: option: remove unnecessary and erroneous code
Alan Stern [Thu, 9 Jul 2009 16:58:43 +0000 (12:58 -0400)]
USB: option: remove unnecessary and erroneous code

This patch (as1264) removes a bunch of unnecessary and erroneous stuff
from the option USB-serial driver.  Clearly there's no need to verify
that the device pointer stored in the URBs is right or to store the
same pointer over again.  After all, the pointer can't change once it
has been set up.

There's also no need to call usb_clear_halt for the IN endpoint
multiple times -- in fact, doing so is an error since every time after
the first there will be active URBs queued for that endpoint.  Since
the Clear-Halts don't appear to be needed at all, the patch simply
removes them.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: cypress_m8: remove invalid Clear-Halt
Alan Stern [Thu, 9 Jul 2009 16:59:57 +0000 (12:59 -0400)]
USB: cypress_m8: remove invalid Clear-Halt

This patch (as1265) removes an erroneous call to usb_clear_halt from
the cypress_m8 driver.  The call isn't valid because it is made from
interrupt context whereas usb_clear_halt is a blocking routine.

Presumably the code has never been executed; if it did it would cause
an oops.  So instead treat -EPIPE like any other sort of unexplained
error.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: musb_host: undo incorrect change in musb_advance_schedule()
Sergei Shtylyov [Fri, 10 Jul 2009 17:02:44 +0000 (20:02 +0300)]
USB: musb_host: undo incorrect change in musb_advance_schedule()

Commit c9cd06b3d6ea825c62e277def929cc4315802b48 (musb_host: refactor
URB giveback) included due to my overlook the change incorrect in the
context of the current kernel -- undo it.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: fix LANGID=0 regression
Daniel Mack [Fri, 10 Jul 2009 09:04:58 +0000 (11:04 +0200)]
USB: fix LANGID=0 regression

commit b7af0bb ("USB: allow malformed LANGID descriptors") broke support
for devices without string descriptor support.

Reporting string descriptors is optional to USB devices, and a device
lets us know it can't deal with strings by responding to the LANGID
request with a STALL token.

The kernel handled that correctly before b7af0bb came in, but failed
hard if the LANGID was reported but broken. More than that, if a device
was not able to provide string descriptors, the LANGID was retrieved
over and over again at each string read request.

This patch changes the behaviour so that

 a) the LANGID is only queried once
 b) devices which can't handle string requests are not asked again
 c) devices with malformed LANGID values have a sane fallback to 0x0409

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: serial: sierra driver id_table additions
Elina Pasheva [Fri, 10 Jul 2009 00:55:18 +0000 (17:55 -0700)]
USB: serial: sierra driver id_table additions

- Updated the id_table with all devices that Sierra Wireless currently
   support
 - Re-ordered the contents of the id_table for better readability

Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter.
Krzysztof Halasa [Thu, 9 Jul 2009 23:06:23 +0000 (01:06 +0200)]
USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter.

Adds USB ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter.

Signed-off-by: Krzysztof Ha³asa <khc@pm.waw.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: fix race leading to a write after kfree in usbfs
Oliver Neukum [Wed, 8 Jul 2009 17:09:23 +0000 (19:09 +0200)]
USB: fix race leading to a write after kfree in usbfs

this fixes a race between async_completed() and proc_reapurbnonblock().

CPU A                   CPU B

spin_lock(&ps->lock);
list_move_tail(&as->asynclist, &ps->async_completed);
spin_unlock(&ps->lock);

                                if (!(as = async_getcompleted(ps)))
                                        return -EAGAIN;
                                return processcompl(as, (void __user * __user *)arg);

processcompl() calls free_async() which calls kfree(as)

as->status = urb->status;
if (as->signr) {
        sinfo.si_signo = as->signr;
        sinfo.si_errno = as->status;
        sinfo.si_code = SI_ASYNCIO;
        sinfo.si_addr = as->userurb;
        kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid,
                              as->euid, as->secid);
}
snoop(&urb->dev->dev, "urb complete\n");
snoop_urb(urb, as->userurb);

write after kfree

Signed-off-by: Oliver Neukum <oliver@neukum.org>
15 years agoUSB: Sierra: fix oops upon device close
Alan Stern [Tue, 7 Jul 2009 13:50:14 +0000 (09:50 -0400)]
USB: Sierra: fix oops upon device close

This patch (as1263) fixes a mixup that occurred when conflicting
patches for the sierra driver were merged incorrectly.  The former
sierra_shutdown routine should have been become sierra_release, not
sierra_disconnect.

The symptom this fixes is an oops when the device file is closed after
a Sierra device has been unplugged (Bugzilla #13675).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Peter Naulls <peter@mushroomnetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: option.c: add A-Link 3GU device id
Anssi Hannula [Mon, 6 Jul 2009 16:08:59 +0000 (19:08 +0300)]
USB: option.c: add A-Link 3GU device id

Add A-Link 3GU device id 1e0e:9200 into option driver. The device
has 4 interfaces, of which 1 is handled by storage and the other 3
by option driver.

The device appears first as CD-only 1e0e:f000 device and must be
switched to 1e0e:9200 mode either by using "eject CD" or
usb_modeswitch.

For the record, the device does not work with generic usbserial
driver (usb disconnect when sending the ATDT command).

Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: Serial: Add support for Arkham Technology adapters
Amit Kucheria [Mon, 6 Jul 2009 11:19:59 +0000 (14:19 +0300)]
USB: Serial: Add support for Arkham Technology adapters

As reported by David Potts from Arkham Technology, the current driver
works with their hardware on addition of the device ids.

Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: Fix option_ms regression in 2.6.31-rc2
Jonathan McDowell [Sun, 5 Jul 2009 11:29:51 +0000 (12:29 +0100)]
USB: Fix option_ms regression in 2.6.31-rc2

Commit 32ebbe7b6ad44ae9c276419710b56de6ba705303 which filters the
SCSI REZERO command in option_ms based on a SCSI INQUIRY with a vendor
of Option breaks my Option Icon 225 (0af0:6971). This device returns a
vendor of ZCOPTION for the ZeroCD device. The following trivial patch
fixes things for me.

Signed-Off-By: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: gadget audio: select SND_PCM
Randy Dunlap [Fri, 3 Jul 2009 20:26:57 +0000 (13:26 -0700)]
USB: gadget audio: select SND_PCM

Fix USB gadget audio: select SND_PCM, like many other sound
drivers do, to fix build errors:

drivers/built-in.o: In function `f_audio_playback_work':
audio.c:(.text+0x15a3e7): undefined reference to `snd_pcm_kernel_ioctl'
audio.c:(.text+0x15a471): undefined reference to `snd_pcm_lib_write'
drivers/built-in.o: In function `_snd_pcm_hw_param_set':
audio.c:(.text+0x15aca7): undefined reference to `snd_interval_refine'
drivers/built-in.o: In function `gaudio_setup':
(.init.text+0x12adf): undefined reference to `_snd_pcm_hw_params_any'
drivers/built-in.o: In function `gaudio_setup':
(.init.text+0x12b43): undefined reference to `snd_pcm_kernel_ioctl'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: ftdi: support NDI devices
Martin Geleynse [Thu, 2 Jul 2009 17:10:35 +0000 (13:10 -0400)]
USB: ftdi: support NDI devices

It enhances the driver for FTDI-based USB serial adapters to recognize and
support Northern Digital Inc (NDI) measurement equipment. NDI has been
providing this patch for various kernel flavors for several years and we would
like to see these changes built in to the driver so that our equipement works
without the need for customers to patch the kernel themselves.

The patch makes small modifications to 2 files: ./drivers/usb/serial/ftdi_sio.c
and ./drivers/usb/serial/ftdi_sio.h. It accomplishes 3 things:

1. Define the VID and PIDs to allow the driver to recognize the NDI devices.
2. Map the 19200 baud rate setting to our higher baud rate of 1.2Mb
   We would have chosen to map 38400 to the higher rate, similar to what
   several other vendors have done, but some of our legacy customers actually
   use 38400, therefore we remap 19200 to the higher rate.
3. We set the default transmit latency in the FTDI chip to 1ms for our devices.
   Our devices are typically polled at 60Hz and the default ftdi latency
   seriously affects turn-around time and results in missed data frames. We
   have created a modprobe option that allows this setting to be increased.
   This has proven necessary particularly in some virtualized environments.

Signed-off-by: Martin P. Geleynse <mgeleyns@ndigital.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoRevert USB: usbfs: deprecate and hide option for !embedded
Greg Kroah-Hartman [Fri, 10 Jul 2009 04:35:49 +0000 (21:35 -0700)]
Revert USB: usbfs: deprecate and hide option for !embedded

This reverts commit cc71329b3b89b4a5be849b617f2c4f151f0b9213, so that
Red Hat machines can boot properly.  It seems that the Red Hat initrd
code tries to watch the /proc/bus/usb/devices file to monitor usb
devices showing up.  While this task is prone to lots of races and does
not show the true state of the system, they seem to like it.

So for now, don't move this option under the EMBEDDED config option.

Cc: Scott James Remnant <scott@canonical.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Jeff Chua <jeff.chua.linux@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: usb.h: fix kernel-doc notation
Randy Dunlap [Thu, 18 Jun 2009 17:39:11 +0000 (10:39 -0700)]
USB: usb.h: fix kernel-doc notation

Fix usb.h kernel-doc warnings:

Warning(include/linux/usb.h:918): Excess struct/union/enum/typedef member 'nodename' description in 'usb_device_driver'
Warning(include/linux/usb.h:939): No description found for parameter 'nodename'
Warning(include/linux/usb.h:1219): No description found for parameter 'sg'
Warning(include/linux/usb.h:1219): No description found for parameter 'num_sgs'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: RNDIS gadget, fix issues talking from PXA
David Brownell [Fri, 19 Jun 2009 10:09:04 +0000 (03:09 -0700)]
USB: RNDIS gadget, fix issues talking from PXA

The reworked Ethernet gadget has an RNDIS interop problem when used
with the CDC subset driver ... e.g. on PXA 2xx and 3xx hardware,
which currently has a hard time talking to MS-Windows hosts.

The issue is that Microsoft requires USB_CLASS_COMM.  Fix by tweaking
the CDC subset driver to not switch to USB_CLASS_VENDOR_SPEC if RNDIS
is used in some other device configuration.

[ UPDATED:  some "statements" were comma-terminated; fix that. ]

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Aric Blumer <aric@sdgsystems.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: serial: FTDI with product code FB80 and vendor id 0403
Folkert van Heusden [Fri, 19 Jun 2009 20:14:42 +0000 (22:14 +0200)]
USB: serial: FTDI with product code FB80 and vendor id 0403

It seems an USB device with vendor id 0403 and product code FB80 has an
FTDI serial io chip as well: http://ftdichip.com/Drivers/D2XX.htm
This device in fact is a true random generantor by comsci:
http://comscire.com/Products/R2000KU/
So the following patch should add support for this device if I am
correct. Not tested as I do not own this device (I would like support in
the kernel so that my entropybroker application (which distributes
entrop data (random values) between servers and clients)).

From: Folkert van Heusden <folkert@vanheusden.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: console: Fix regression in usb console on kernel boot
Jason Wessel [Mon, 22 Jun 2009 16:32:20 +0000 (11:32 -0500)]
USB: console: Fix regression in usb console on kernel boot

The commit 335f8514f200e63d689113d29cb7253a5c282967 introduced a
regression which stopped usb consoles from working correctly as a
kernel boot console as well as interactive login device.

The addition of the serial_close() which in turn calls
tty_port_close_start() will change the reference count of port.count
and warn about it.  The usb console code had previously incremented
the port.count to indicate it was making use of the device as a
console and the forced change causes a double open on the usb device
which leads to a non obvious kernel oops later on when the tty is
freed.

To fix the problem instead make use of port->console to track if the
port is in fact an active console port to avoid double initialization
of the usb serial device.  The port.count is incremented and
decremented only with in the scope of usb_console_setup() for the
purpose of the low level driver initialization.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: add missing class descriptions used in usb/devices file
Frans Pop [Fri, 26 Jun 2009 14:10:19 +0000 (16:10 +0200)]
USB: add missing class descriptions used in usb/devices file

Added descriptions (for WIRELESS_CONTROLLER and MISC) were taken from
the usb-devices script now included in usbutils.

Also sort the classes in the same order as in include/linux/usb/ch9.h
for easier comparison for future updates.

Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: fix memleak in usbfs
Oliver Neukum [Sun, 28 Jun 2009 21:34:14 +0000 (23:34 +0200)]
USB: fix memleak in usbfs

This patch fixes a memory leak in devio.c::processcompl

If writing to user space fails the packet must be discarded, as it
already has been removed from the queue of completed packets.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: EHCI: check for STALL before other errors
Alan Stern [Mon, 29 Jun 2009 21:36:14 +0000 (17:36 -0400)]
USB: EHCI: check for STALL before other errors

This patch (as1257) revises the way ehci-hcd detects STALLs.  The
logic is a little peculiar because there's no hardware status bit
specifically meant to indicate a STALL.  You just have to guess that a
STALL was received if the BABBLE bit (which is fatal) isn't set and
the transfer stopped before all its retries were used up.

The existing code doesn't do this properly, because it tests for MMF
(Missed MicroFrame) and DBE (Data Buffer Error) before testing the
retry counter.  Thus, if a transaction gets either MMF or DBE the
corresponding flag is set and the transaction is retried.  If the
second attempt receives a STALL then -EPIPE is the correct return
value.  But the existing code would see the MMF or DBE flag instead
and return -EPROTO, -ENOSR, or -ECOMM.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: EHCI: use the new clear_tt_buffer interface
Alan Stern [Mon, 29 Jun 2009 14:47:30 +0000 (10:47 -0400)]
USB: EHCI: use the new clear_tt_buffer interface

This patch (as1256) changes ehci-hcd and all the other drivers in the
EHCI family to make use of the new clear_tt_buffer callbacks.  When a
Clear-TT-Buffer request is in progress for a QH, the QH is not allowed
to be linked into the async schedule until the request is finished.
At that time, if there are any URBs queued for the QH, it is linked
into the async schedule.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: fix the clear_tt_buffer interface
Alan Stern [Mon, 29 Jun 2009 14:43:32 +0000 (10:43 -0400)]
USB: fix the clear_tt_buffer interface

This patch (as1255) updates the interface for calling
usb_hub_clear_tt_buffer().  Even the name of the function is changed!

When an async URB (i.e., Control or Bulk) going through a high-speed
hub to a non-high-speed device is cancelled or fails, the hub's
Transaction Translator buffer may be left busy still trying to
complete the transaction.  The buffer has to be cleared; that's what
usb_hub_clear_tt_buffer() does.

It isn't safe to send any more URBs to the same endpoint until the TT
buffer is fully clear.  Therefore the HCD needs to be told when the
Clear-TT-Buffer request has finished.  This patch adds a callback
method to struct hc_driver for that purpose, and makes the hub driver
invoke the callback at the proper time.

The patch also changes a couple of names; "hub_tt_kevent" and
"tt.kevent" now look rather antiquated.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: fix uninitialised variable in ti_do_download
Oliver Neukum [Tue, 30 Jun 2009 07:44:24 +0000 (09:44 +0200)]
USB: fix uninitialised variable in ti_do_download

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: option: add Novatel Ovation MC760
Dan Williams [Tue, 30 Jun 2009 20:09:28 +0000 (16:09 -0400)]
USB: option: add Novatel Ovation MC760

Used by Virgin Mobile with the Broadband2Go service, for example.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: cdc-acm: work around some broken devices
Arseniy Lartsev [Wed, 1 Jul 2009 12:27:26 +0000 (16:27 +0400)]
USB: cdc-acm: work around some broken devices

This patch introduces a work around for cdc-acm devices which are
low speed contrary to the specification, which requires bulk endpoints
which are banned in low speed and converted by usbcore to virtual
interrupt endpoints if they are used nevertheless.

Signed-off-by: Arseniy Lartsev <ars3n@yandex.ru>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: musb: silence "suspend as a_wait_vrise is_active" msgs
David Brownell [Wed, 1 Jul 2009 10:36:16 +0000 (03:36 -0700)]
USB: musb: silence "suspend as a_wait_vrise is_active" msgs

Get rid of some obnoxious and inappropriate messaging, mostly on
DaVinci, when usbcore tries to autosuspend a root hub if just a
mini/micro-A connector is connected.  Symptom: endless stream of
messages reading like:

 musb_bus_suspend 2221: trying to suspend as a_wait_vrise is_active=1

Improve that musb bus suspend primitive a bit.  Take advantage of
this call to update the OTG state machine if appropriate, moving
the device out of the A_WAIT_VRISE state.  There's basically no
timer for that state transition just now, except with tusb6010;
that can make trouble.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: gadget: pxa25x compiler warning fix
David Brownell [Wed, 1 Jul 2009 10:43:58 +0000 (03:43 -0700)]
USB: gadget: pxa25x compiler warning fix

Fix config-dependent compiler warning:

  CC      drivers/usb/gadget/pxa25x_udc.o
drivers/usb/gadget/pxa25x_udc.c: In function 'pxa25x_udc_irq':
drivers/usb/gadget/pxa25x_udc.c:1806: warning: array subscript is above array bounds

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: gadget: pxa25x uses gpio_is_valid
Philipp Zabel [Wed, 1 Jul 2009 10:42:45 +0000 (03:42 -0700)]
USB: gadget: pxa25x uses gpio_is_valid

Use gpio_is_valid instead of assuming that every GPIO
number != 0 is valid while 0 is not.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: musb: davinci dm6446evm GPIO renumbering
Kevin Hilman [Wed, 1 Jul 2009 10:33:46 +0000 (03:33 -0700)]
USB: musb: davinci dm6446evm GPIO renumbering

Numbering for GPIOs on the pcf857x chips on the dm644x EVM board
changed when DaVinci chips with more GPIOs were supported.  Update
the GPIO number used for nVBUS_DRV.

Longer term, we need a better abstraction of board-specific setup in
this code so we're not hard-coding board specific GPIOs into the
driver, but for now this at least gets it back to working with
mainline davinci core code.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: musb: davinci dm355 updates (remainder)
David Brownell [Wed, 1 Jul 2009 10:32:43 +0000 (03:32 -0700)]
USB: musb: davinci dm355 updates (remainder)

Finish merging updates for DM355 chips into musb/davinci.c now
that its support is in mainline:  kick in new DRVVBUS controls.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: gadget: rndis conformance tweak
Qiuping Chen [Wed, 1 Jul 2009 10:49:29 +0000 (03:49 -0700)]
USB: gadget: rndis conformance tweak

Support OID_802_3_MAC_OPTIONS in gen_ndis_query_resp() of rndis.c to
make RNDIS gadget pass 1c_SetMulticast subtest in Microsoft NDISTest6:

  http://www.microsoft.com/whdc/DevTools/tools/NDIStest.mspx

The other tests in NDISTest6 are passed.

[ dbrownell@users.sourceforge.net: remove OID_802_3_MAXIMUM_LIST_SIZE
setting ... it was bogus, this code only handles one entry, not 32.
And we don't know what would break if we lied about that... ]

Signed-off-by: Helen Chen <helen.chen@intel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: fix memory leak in usbtmc
Oliver Neukum [Thu, 2 Jul 2009 14:41:39 +0000 (16:41 +0200)]
USB: fix memory leak in usbtmc

If an error is returned kfree must also be called.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: buildfix ppc randconfig
Arnd Bergmann [Fri, 19 Jun 2009 12:35:34 +0000 (05:35 -0700)]
USB: buildfix ppc randconfig

We could just make the USB_OHCI_HCD_PPC_OF option implicit
and selected only if at least one of USB_OHCI_HCD_PPC_OF_BE
and USB_OHCI_HCD_PPC_OF_LE are set.

[ dbrownell@users.sourceforge.net: fix patch manglation and dependencies ]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: ti_usb_3410_5052: fix duplicate device ids.
Greg Kroah-Hartman [Fri, 26 Jun 2009 15:05:20 +0000 (08:05 -0700)]
USB: ti_usb_3410_5052: fix duplicate device ids.

commit 1a1fab513734b3a4fca1bee8229e5ff7e1cb873c accidentally added the
device id to both tables in the driver, which causes problems as this is
only a single port device, not a multiple port device.

Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: gadget: audio: provide correct device id
Greg Kroah-Hartman [Tue, 23 Jun 2009 23:01:06 +0000 (16:01 -0700)]
USB: gadget: audio: provide correct device id

The audio gadget driver should use a "Linux" device id, instead
of relying on NetChip's vendor id.  So provide one out of our reserved
namespace.

Cc: Bryan Wu <cooloney@kernel.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoRevert "USB: Add Intel Langwell USB OTG Transceiver Drive"
Greg Kroah-Hartman [Tue, 23 Jun 2009 22:58:48 +0000 (15:58 -0700)]
Revert "USB: Add Intel Langwell USB OTG Transceiver Drive"

This reverts commit 453f77558810ffa669ed5a510a7173ec49def396.

The driver should not have been accepted as the MSRT code is not
in the main kernel yet, which this depends on.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Hao Wu <hao.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: option.c to support Qisda H21/H20 usb modem
Brad Lu [Tue, 16 Jun 2009 10:04:00 +0000 (18:04 +0800)]
USB: option.c to support Qisda H21/H20 usb modem

This patch added Qisda(VID) & H21/H20(PID) into to supporting list.
Please help to check this patch,

From: Brad Lu <Brad.Lu@Qisda.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: option.c: add Qualcomm/Option iCON 210 modem
Kai Engert [Fri, 12 Jun 2009 06:51:37 +0000 (08:51 +0200)]
USB: option.c: add Qualcomm/Option iCON 210 modem

Add modem portion of USB device labeled:
Model iCON 210, Qualcomm 3G HSDPA, designed in EU by Option

Device starts in usb-storage mode (1e0e:f000) and requires the use of a tool
like usb_modeswitch to switch it to modem mode (1e0e:9000).

Signed-off-by: Kai Engert <kaie@kuix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: isp1760: use __devexit_p() for remove function
Mike Frysinger [Fri, 12 Jun 2009 01:59:00 +0000 (21:59 -0400)]
USB: isp1760: use __devexit_p() for remove function

The isp1760_plat_remove function is declared with __devexit, so the
.remove assignment needs to be wrapped with __devexit_p().

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: EHCI: update toggle state for linked QHs
Alan Stern [Thu, 11 Jun 2009 18:56:22 +0000 (14:56 -0400)]
USB: EHCI: update toggle state for linked QHs

This is an update to the "usb-ehci-update-toggle-state-for-linked-qhs"
patch.  Since an HCD's endpoint_reset method can be called in
interrupt context, it mustn't assume that interrupts are enabled or
that it can sleep.

So we revert to the original way of refreshing QHs' toggle bits.  Now
the endpoint_reset method merely clears the toggle flag in the device
structure (as was done before) and starts an async QH unlink.  When the
QH is linked again, after the unlink finishes and an URB is queued,
the qh_refresh() routine will update the QH's toggle bit.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: David <david@unsolicited.net>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: fhci: mutually exclusive port_status
Roel Kluin [Wed, 10 Jun 2009 19:57:35 +0000 (12:57 -0700)]
USB: fhci: mutually exclusive port_status

FHCI_PORT_DISABLED, -LOW and -FULL are mutually exclusive as status.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: ftdi_sio - product ID's for CCS PIC programmers
Jan Capek [Wed, 10 Jun 2009 16:58:52 +0000 (18:58 +0200)]
USB: ftdi_sio - product ID's for CCS PIC programmers

The product ID's for the following devices have been added:
- LOAD-n-GO
- ICD-U64
- PRIME-8

Signed-off-by: Jan Capek <jan@ccsinfo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: gadget: fix imx_udc entry in Kconfig
Paulius Zaleckas [Tue, 9 Jun 2009 08:11:16 +0000 (11:11 +0300)]
USB: gadget: fix imx_udc entry in Kconfig

Move USB_GADGET_IMX to the right section of Kconfig as this
controller is available only as integrated on i.MX CPU.

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: pl2303: New vendor and product id for the prolific driver
Gianpaolo Cugola [Fri, 5 Jun 2009 20:57:52 +0000 (22:57 +0200)]
USB: pl2303: New vendor and product id for the prolific driver

I recently bought a PC interface for the Cressi Edy dive computer
(www.cressi.it) and discovered that it uses the pl2303 chip, albeit
with ad-hoc vendor and product ids (04b8, 0521 respectively). Being in
the process of writing a linux software for such device (cressi only
provides a windows software), I patched the pl2303 linux driver to
have the interface recognized. I am submitting you the patch (very
basic) for inclusion in next kernel version.

From: Gianpaolo Cugola <gianpaoloc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoStaging: stlc45xx: convert config_interface to bss_info_changed, fixing a build error
Alexander Beregalov [Sat, 20 Jun 2009 16:58:33 +0000 (20:58 +0400)]
Staging: stlc45xx: convert config_interface to bss_info_changed, fixing a build error

See commit 2d0ddec5b2b (mac80211: unify config_interface and
bss_info_changed)

This fixes a build error.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoStaging: comedi: s626: use subvendor:subdevice ids for SAA7146 board
Herton Ronaldo Krzesinski [Thu, 18 Jun 2009 17:43:56 +0000 (14:43 -0300)]
Staging: comedi: s626: use subvendor:subdevice ids for SAA7146 board

The current s626 comedi driver in staging conflicts with philips SAA7146
media/dvb based cards, because it claims the same vendor:device pci id
for all subdevice/subvendor ids. What happens is that for people that have a
philips SAA7146 media/dvb based card, s626 if available gets loaded by udev
and makes system freeze (https://qa.mandriva.com/show_bug.cgi?id=51445).

The s626 driver shouldn't claim all 1131:7146 devices. Fix this by
specifying specific known subvendor:subdevice ids in its pci id table
list.

Also s626_attach is modified to use now pci_get_subsys instead of
pci_get_device as reported by Ian Abbott, and now we loop over pci id
table entries in case more ids are added in the future.

Reference: http://lkml.org/lkml/2009/6/16/552

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoStaging: prevent rtl8192su from crashing dev_ioctl in SIOCGIWNAME
Dan Aloni [Wed, 24 Jun 2009 19:34:39 +0000 (22:34 +0300)]
Staging: prevent rtl8192su from crashing dev_ioctl in SIOCGIWNAME

(adapted from the rtl8187se patch)

ieee80211_wx_get_name() ignores sizeof(wrqu->name) which is IFNAMSIZ (16), and
on certain conditions, the concatenated string will be larger than IFNAMSIZ
including the terminating zero.

    length ("802.11" ++ "b" ++ "/g" ++ " linked" ++ "\x00") == 17

This fix uses strl{cpy,cat} in addition to the reduction of the total
possible length of the output string by a char.

It can be applied to 2.6.30-stable as well.

Signed-off-by: Dan Aloni <dan@aloni.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoStaging: prevent rtl8187se from crashing dev_ioctl() in SIOCGIWNAME
Dan Aloni [Sat, 20 Jun 2009 13:32:22 +0000 (16:32 +0300)]
Staging: prevent rtl8187se from crashing dev_ioctl() in SIOCGIWNAME

I repeatedly get __stack_chk_fail panic()s with this driver before
applying the attached fix.

ieee80211_wx_get_name() ignores sizeof(wrqu->name) which is IFNAMSIZ (16), and
on certain conditions, the concatenated string will be larger than IFNAMSIZ
including the terminating zero.

    length ("802.11" ++ "b" ++ "/g" ++ " linked" ++ "\x00") == 17

This fix uses strl{cpy,cat} in addition to the reduction of the total
possible length of the output string by a char.

It can be applied to 2.6.30-stable as well.

Signed-off-by: Dan Aloni <dan@aloni.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoStaging: rtl8192su: convert to net_device_ops
Bartlomiej Zolnierkiewicz [Thu, 11 Jun 2009 18:49:07 +0000 (20:49 +0200)]
Staging: rtl8192su: convert to net_device_ops

commit e3804cbebb67887879102925961d41b503f7fbe3 removed
COMPAT_NET_DEV_OPS so this change is needed to make rtl8192su
buildable again.

Loosely based on Alexander's patch for rtl8187se, untested.

Cc: Alexander Beregalov <a.beregalov@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoStaging: serqt_usb2: declare qt_open static in serqt_usb2
Bill Pemberton [Fri, 19 Jun 2009 16:32:57 +0000 (12:32 -0400)]
Staging: serqt_usb2: declare qt_open static in serqt_usb2

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoStaging: serqt_usb2: fix qt_close parameters in serqt_usb2
Bill Pemberton [Fri, 19 Jun 2009 16:32:56 +0000 (12:32 -0400)]
Staging: serqt_usb2: fix qt_close parameters in serqt_usb2

The parameter list for qt_close() was from the old non usb-serial
driver.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoStaging: comedi: jr3_pci.c: add required includes
Alexander Beregalov [Fri, 19 Jun 2009 23:52:47 +0000 (03:52 +0400)]
Staging: comedi: jr3_pci.c: add required includes

Fix this build errors:
jr3_pci.c:739: error: 'jiffies' undeclared
jr3_pci.c:748: error: implicit declaration of function 'msecs_to_jiffies'
jr3_pci.c:763: error: implicit declaration of function 'add_timer'
jr3_pci.c:790: error: implicit declaration of function 'init_timer'
jr3_pci.c:951: error: implicit declaration of function 'del_timer_sync'

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoStaging: meilhaus: add email address to TODO
Greg Kroah-Hartman [Thu, 2 Jul 2009 19:55:39 +0000 (12:55 -0700)]
Staging: meilhaus: add email address to TODO

Meilhaus Support also wants to be notified of changes to these drivers.

Cc: David Kiliani <mail@davidkiliani.de>
Cc: Meilhaus Support <support@meilhaus.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoStaging: rspiusb: use NULL virtual address instead of a bogus one
Pete Zaitcev [Wed, 10 Jun 2009 20:44:14 +0000 (14:44 -0600)]
Staging: rspiusb: use NULL virtual address instead of a bogus one

The main problem here is that I just cannot see how this could ever
be correct:

usb_fill_bulk_urb(pdx->PixelUrb[frameInfo][i], pdx->udev, epAddr,
(dma_addr_t *) sg_dma_address(&pdx->sgl[frameInfo][i]),
  sg_dma_len(&pdx->sgl[frameInfo][i]),

You cannot take a DMA address, cast it to a _pointer to_ a DMA address,
and then regard it as a virtual address of the transfer buffer.
However, finding the right virtual address was too hard for me,
so I just stubbed it with NULL. At least usbmon won't oops then
(it will not show any data but it's better than crashing).

Also, too big a buffer was allocated elsewhere.

And since we're at it, drop clearly unnecessary usb_buffer_alloc too,
leaving it where it may be useful.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoStaging: vt6655: compile fix
Alan Cox [Wed, 10 Jun 2009 16:30:49 +0000 (17:30 +0100)]
Staging: vt6655: compile fix

At least make it compile

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoStaging: rt2870: Add USB ID for Sitecom WL-608
Jorrit Schippers [Wed, 10 Jun 2009 13:34:26 +0000 (15:34 +0200)]
Staging: rt2870: Add USB ID for Sitecom WL-608

Add the USB id 0x0DF6,0x003F to the rt2870.h file such that the
Sitecom WL-608 device will be recognized by this driver.

Signed-off-by: Jorrit Schippers <jorrit@ncode.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agowm97xx_batery: replace driver_data with dev_get_drvdata()
Alexander Beregalov [Tue, 23 Jun 2009 13:50:06 +0000 (17:50 +0400)]
wm97xx_batery: replace driver_data with dev_get_drvdata()

direct access of driver_data is going away.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoomap: video: remove direct access of driver_data
Greg Kroah-Hartman [Tue, 23 Jun 2009 15:31:46 +0000 (08:31 -0700)]
omap: video: remove direct access of driver_data

dev_set/get_drvdata() should be used instead, as driver_data is going
away.

Cc: Imre Deak <imre.deak@nokia.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Trilok Soni <soni.trilok@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Felipe Contreras <felipe.contreras@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoSound: remove direct access of driver_data
Greg Kroah-Hartman [Mon, 22 Jun 2009 22:46:03 +0000 (15:46 -0700)]
Sound: remove direct access of driver_data

This is the last in-kernel direct usage of driver_data, replace it with
the proper dev_get/set_drvdata() calls.

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@perex.cz>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agodriver model: fix show/store prototypes in doc.
vibi sreenivasan [Wed, 8 Jul 2009 22:37:03 +0000 (15:37 -0700)]
driver model: fix show/store prototypes in doc.

FIX prototypes for show & store method in struct driver_attribute

Signed-off-by: vibi sreenivasan <vibi_sreenivasan@cms.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoFirmware: firmware_class, fix lock imbalance
Jiri Slaby [Sun, 21 Jun 2009 21:57:31 +0000 (23:57 +0200)]
Firmware: firmware_class, fix lock imbalance

Add omitted unlock in firmware_data_read.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoDriver Core: remove BUS_ID_SIZE
Kay Sievers [Thu, 2 Jul 2009 21:25:44 +0000 (23:25 +0200)]
Driver Core: remove BUS_ID_SIZE

The name size limit is gone from the driver-core, this is
the removal of the last left-over.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agosparc: remove driver-core BUS_ID_SIZE
Kay Sievers [Thu, 2 Jul 2009 21:27:22 +0000 (23:27 +0200)]
sparc: remove driver-core BUS_ID_SIZE

The name size limit is gone from the driver-core, the BUS_ID_SIZE
value will be removed.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agopartitions: fix broken uevent_suppress conversion
Heiko Carstens [Thu, 11 Jun 2009 13:14:40 +0000 (15:14 +0200)]
partitions: fix broken uevent_suppress conversion

git commit f67f129e "Driver core: implement uevent suppress in kobject"
contains this chunk for fs/partitions/check.c:

  /* suppress uevent if the disk supresses it */
- if (!ddev->uevent_suppress)
+ if (!dev_get_uevent_suppress(pdev))
  kobject_uevent(&pdev->kobj, KOBJ_ADD);

However that should have been

- if (!ddev->uevent_suppress)
+ if (!dev_get_uevent_suppress(ddev))

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Ming Lei <tom.leiming@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agodevres: WARN() and return, don't crash on device_del() of uninitialized device
Benjamin Herrenschmidt [Wed, 10 Jun 2009 19:43:02 +0000 (12:43 -0700)]
devres: WARN() and return, don't crash on device_del() of uninitialized device

I just debugged an obscure crash caused by a device_del() of a all NULL'd
out struct device (in usb-serial) and found that a patch like this one would
have saved me time (in addition to improved chances of a bug report from
users hitting similar driver bugs).

[akpm@linux-foundation.org: cleanup]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoMerge branch 'kmemleak' of git://linux-arm.org/linux-2.6
Linus Torvalds [Sun, 12 Jul 2009 19:24:35 +0000 (12:24 -0700)]
Merge branch 'kmemleak' of git://linux-arm.org/linux-2.6

* 'kmemleak' of git://linux-arm.org/linux-2.6:
  kmemleak: Remove alloc_bootmem annotations introduced in the past
  kmemleak: Add callbacks to the bootmem allocator
  kmemleak: Allow partial freeing of memory blocks
  kmemleak: Trace the kmalloc_large* functions in slub
  kmemleak: Scan objects allocated during a scanning episode
  kmemleak: Do not acquire scan_mutex in kmemleak_open()
  kmemleak: Remove the reported leaks number limitation
  kmemleak: Add more cond_resched() calls in the scanning thread
  kmemleak: Renice the scanning thread to +10

15 years agoAFS: Fix compilation warning
Artem Bityutskiy [Thu, 9 Jul 2009 09:44:30 +0000 (10:44 +0100)]
AFS: Fix compilation warning

Fix the following warning:

  fs/afs/dir.c: In function 'afs_d_revalidate':
  fs/afs/dir.c:567: warning: 'fid.vnode' may be used uninitialized in this function
  fs/afs/dir.c:567: warning: 'fid.unique' may be used uninitialized in this function

by marking the 'fid' variable as an uninitialized_var.  The problem is
that gcc doesn't always manage to work out that fid is always set on the
path through the function that uses it.

Cc: linux-afs@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoheaders: smp_lock.h redux
Alexey Dobriyan [Sat, 11 Jul 2009 18:08:37 +0000 (22:08 +0400)]
headers: smp_lock.h redux

* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
  It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

  This will make hardirq.h inclusion cheaper for every PREEMPT=n config
  (which includes allmodconfig/allyesconfig, BTW)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agopersonality: fix PER_CLEAR_ON_SETID
Julien Tinnes [Fri, 26 Jun 2009 18:27:40 +0000 (20:27 +0200)]
personality: fix PER_CLEAR_ON_SETID

We have found that the current PER_CLEAR_ON_SETID mask on Linux doesn't
include neither ADDR_COMPAT_LAYOUT, nor MMAP_PAGE_ZERO.

The current mask is READ_IMPLIES_EXEC|ADDR_NO_RANDOMIZE.

We believe it is important to add MMAP_PAGE_ZERO, because by using this
personality it is possible to have the first page mapped inside a
process running as setuid root.  This could be used in those scenarios:

 - Exploiting a NULL pointer dereference issue in a setuid root binary
 - Bypassing the mmap_min_addr restrictions of the Linux kernel: by
   running a setuid binary that would drop privileges before giving us
   control back (for instance by loading a user-supplied library), we
   could get the first page mapped in a process we control.  By further
   using mremap and mprotect on this mapping, we can then completely
   bypass the mmap_min_addr restrictions.

Less importantly, we believe ADDR_COMPAT_LAYOUT should also be added
since on x86 32bits it will in practice disable most of the address
space layout randomization (only the stack will remain randomized).

Signed-off-by: Julien Tinnes <jt@cr0.org>
Signed-off-by: Tavis Ormandy <taviso@sdf.lonestar.org>
Cc: stable@kernel.org
Acked-by: Christoph Hellwig <hch@infradead.org>
Acked-by: Kees Cook <kees@ubuntu.com>
Acked-by: Eugene Teo <eugene@redhat.com>
[ Shortened lines and fixed whitespace as per Christophs' suggestion ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoDon't use '-fwrapv' compiler option: it's buggy in gcc-4.1.x
Linus Torvalds [Sun, 12 Jul 2009 18:25:04 +0000 (11:25 -0700)]
Don't use '-fwrapv' compiler option: it's buggy in gcc-4.1.x

This causes kernel images that don't run init to completion with certain
broken gcc versions.

This fixes kernel bugzilla entry:
http://bugzilla.kernel.org/show_bug.cgi?id=13012

I suspect the gcc problem is this:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=28230

Fix the problem by using the -fno-strict-overflow flag instead, which
not only does not exist in the known-to-be-broken versions of gcc (it
was introduced later than fwrapv), but seems to be much less disturbing
to gcc too: the difference in the generated code by -fno-strict-overflow
are smaller (compared to using neither flag) than when using -fwrapv.

Reported-by: Barry K. Nathan <barryn@pobox.com>
Pushed-by: Frans Pop <elendil@planet.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelv...
Linus Torvalds [Sat, 11 Jul 2009 18:32:28 +0000 (11:32 -0700)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (abituguru3) DMI probing for AB9, AB9 QuadQT and IX38 QuadGT
  hwmon: (sht15) Remove unnecessary semicolon
  hwmon: (max6650) Fix lock imbalance

15 years agoRevert "fuse: Fix build error" as unnecessary
Linus Torvalds [Sat, 11 Jul 2009 18:22:34 +0000 (11:22 -0700)]
Revert "fuse: Fix build error" as unnecessary

This reverts commit 097041e576ee3a50d92dd643ee8ca65bf6a62e21.

Trond had a better fix, which is the parent of this one ("Fix compile
error due to congestion_wait() changes")

Requested-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoFix compile error due to congestion_wait() changes
Trond Myklebust [Sat, 11 Jul 2009 14:06:54 +0000 (10:06 -0400)]
Fix compile error due to congestion_wait() changes

Move the definition of BLK_RW_ASYNC/BLK_RW_SYNC into linux/backing-dev.h
so that it is available to all callers of set/clear_bdi_congested().

This replaces commit 097041e576ee3a50d92dd643ee8ca65bf6a62e21 ("fuse:
Fix build error"), which will be reverted.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agohwmon: (abituguru3) DMI probing for AB9, AB9 QuadQT and IX38 QuadGT
Alistair John Strachan [Sat, 11 Jul 2009 11:42:38 +0000 (13:42 +0200)]
hwmon: (abituguru3) DMI probing for AB9, AB9 QuadQT and IX38 QuadGT

Switch the AB9, AB9 QuadQT and IX38 QuadGT over from port
probing to the preferred DMI probe method.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: dan <dan@deeog.com>
Tested-by: Nygel Lyndley <nygel.lyndley@gmail.com>
Tested-by: Dmitriy Fedchenko <dmitriy-fedc@yandex.ru>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
15 years agohwmon: (sht15) Remove unnecessary semicolon
Joe Perches [Sat, 11 Jul 2009 11:42:37 +0000 (13:42 +0200)]
hwmon: (sht15) Remove unnecessary semicolon

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
15 years agohwmon: (max6650) Fix lock imbalance
Jiri Slaby [Sat, 11 Jul 2009 11:42:37 +0000 (13:42 +0200)]
hwmon: (max6650) Fix lock imbalance

Add omitted update_lock to one switch/case in set_div.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Sat, 11 Jul 2009 02:19:09 +0000 (19:19 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - targa and targa-2ch fix
  ALSA: hda - fix beep tone calculation for IDT/STAC codecs
  ALSA: hda - Missing volume controls for Intel HDA (ALC269/EeePC)
  ALSA: hda - Disable AMD SB600 64bit address support only
  ALSA: hda - Check widget types while parsing capture source in patch_via.c
  ALSA: hda - Fix capture source selection in patch_via.c
  ALSA: hda - Add missing EAPD initialization for VIA codecs
  ALSA: hda - Clean up VT170x dig-in initialization code
  ALSA: hda - Fix error path in the sanity check in azx_pcm_open()
  ALSA: hda - move 8086:fb30 quirk (stac9205) to the proper section
  ASoC: Fix wm8753 register cache size and initialization
  ASoC: add locking to mpc5200-psc-ac97 driver
  ASoC: Fix mpc5200-psc-ac97 to ensure the data ready bit is cleared
  ASoC: Fix register cache initialisation for WM8753

15 years agoisofs: fix Joliet regression
Bartlomiej Zolnierkiewicz [Fri, 10 Jul 2009 10:34:27 +0000 (12:34 +0200)]
isofs: fix Joliet regression

commit 5404ac8e4418ab3d254950ee4f9bcafc1da20b4a ("isofs: cleanup mount
option processing") missed conversion of joliet option flag resulting
in non-working Joliet support.

CC: walt <w41ter@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agotty: Fix the PL2303 private methods for sysrq
Alan Cox [Thu, 9 Jul 2009 12:36:58 +0000 (13:36 +0100)]
tty: Fix the PL2303 private methods for sysrq

PL2303 has private data shovelling methods that also have no fast path. Fix
them to work the same way as the default handler.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agotty: Fix USB kref leak
Alan Cox [Thu, 9 Jul 2009 12:36:22 +0000 (13:36 +0100)]
tty: Fix USB kref leak

The sysrq code acquired a kref leak. Fix it by passing the tty separately
from the caller (thus effectively using the callers kref which all the
callers hold anyway)

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agotty: Sort out the USB sysrq changes that wrecked performance
Alan Cox [Thu, 9 Jul 2009 12:35:52 +0000 (13:35 +0100)]
tty: Sort out the USB sysrq changes that wrecked performance

We can't go around calling all sorts of magic per character functions at
full rate 3G data speed.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'linux-next' of git://git.infradead.org/ubi-2.6
Linus Torvalds [Sat, 11 Jul 2009 02:15:34 +0000 (19:15 -0700)]
Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: fix compilation warnings
  UBI: fix NOR flash recovery
  UBI: nicify image sequence number handling
  UBI: add image sequence number to EC header
  UBI: remove bogus debugging checks
  UBI: add empty eraseblocks verification

15 years agoMerge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
Linus Torvalds [Sat, 11 Jul 2009 02:14:48 +0000 (19:14 -0700)]
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: fix corruption dump
  UBIFS: clean up free space checking
  UBIFS: small amendments in the LEB scanning code
  UBIFS: dump a little more in case of corruptions
  MAINTAINERS: update ahunter's e-mail address
  UBIFS: allow more than one volume to be mounted
  UBIFS: fix assertion warning
  UBIFS: minor spelling and grammar fixes
  UBIFS: fix 64-bit divisions in debug print
  UBIFS: few spelling fixes
  UBIFS: set write-buffer timout to 3-5 seconds
  UBIFS: slightly optimize write-buffer timer usage
  UBIFS: improve debugging messaged
  UBIFS: fix integer overflow warning