John Bowler [Tue, 25 Oct 2005 00:50:27 +0000 (00:50 +0000)]
openslug: move to new configuration file organisation, use IAL 2.0, remove zImage (all versions)
- configuration changes plus a move to use IAL 2.0 for the ethernet
- support and to remove zImage from the default rootfs. This makes
- a lot more space (now around 1MByte) available in the rootfs.
John Bowler [Tue, 25 Oct 2005 00:48:11 +0000 (00:48 +0000)]
ucslugc: reintroduce support for UCSLUGC_* names in parallel with NSLU2_* (all versions)
- the old name form was removed accidentally, reintroduced the original
- names to support existing ucslugc local.conf files.
John Bowler [Mon, 24 Oct 2005 23:57:28 +0000 (23:57 +0000)]
samba: fix uclibc builds (struct timespec) in 3.0.20
- configure.in has an AC_TRY_COMPILE check for the existence of
- struct timespec which fails on uclibc even though struct timespec is
- defined, this causes the build to fail. Fix by supplying a cached
- 'yes' value in all cases.
John Bowler [Mon, 24 Oct 2005 07:50:08 +0000 (07:50 +0000)]
uclibc: rename ucslugc config file to nslu2 in 0.9.28
- the file is actually used in all NSLU2 uclibc builds, even though
- it contains distro settings, therefore to avoid replicating it it
- is made the default for all NSLU2
John Bowler [Mon, 24 Oct 2005 07:46:01 +0000 (07:46 +0000)]
ucslugc, nslu2: formalise different build configs, move to IAL 2.0 and nslu2-kernel
- ucslugc is substantially as before, however the configuration is now
- expressed as a specific instance of nslu2-btu.conf (big-endian, thumb,
- uclibc). The other six buildable variants of ucslugc have been added
- as separate configuration files, all with names of the form 'nslu2-???'
- for big vs little, arm vs thumb and glibc vs uclibc.
- IAL 2.0 is now in a testable state (reboot works) and so is the default
- for all nslu2-??? configurations.
- Overridable variables of the form UCSLUGC_* have been replaced with
- variables named NSLU2_*
John Bowler [Mon, 24 Oct 2005 07:39:02 +0000 (07:39 +0000)]
openslug-image: add udev to RDEPENDS within openslug-image itself
- This change effectively forces all users of openslug-image to use
- udev. Before this change the DISTRO file had to set udev to be
- installed. This ensures consistency and removes the requirement to
- maintain a fully and correctly populated static dev directory (it is
- currently broken and will probably remain so!)
John Bowler [Mon, 24 Oct 2005 07:33:34 +0000 (07:33 +0000)]
ixp4xx-csr: improve Intel license handling in 1.4
- version 1.4 of ixp4xx-csr now behaves like the other versions and
- requires users of the package to download the source code themselves
- from Intel. This helps ensure than no one accidentally violates the
- license agreement (by forcing all builders of the software to read it)
John Bowler [Mon, 24 Oct 2005 07:30:15 +0000 (07:30 +0000)]
ixp400-eth: fix reboot (module unload) problem in LE patch for 1.4
- The LE patch removed code to initialise a semaphore, this caused
- a crash when the semaphore was used during the device close
- Also change config to use the 'only one NPE' option in the build,
- however by examination this doesn't work very well.
openslug defconfig: changed settings to support wider range of hardware
* CONFIG_BLK_DEV_SR=m (for audio extraction from cdrom)
* CONFIG_CHR_DEV_SG=m (for audio extraction from cdrom)
* CONFIG_USB_PWC=m (module for Philips and Logitech Webcams)
* CONFIG_USB_EHCI_SPLIT_ISO=y (support USB 1.1 devices on USB 2.0 hubs)
* CONFIG_CPU_BIG_ENDIAN=y (should be the default until LE is more mature)
defconfig: changed settings to support wider range of hardware
* CONFIG_BLK_DEV_SR=m (for audio extraction from cdrom)
* CONFIG_CHR_DEV_SG=m (for audio extraction from cdrom)
* CONFIG_USB_PWC=m (module for Philips and Logitech Webcams)
* CONFIG_USB_EHCI_SPLIT_ISO=y (support USB 1.1 devices on USB 2.0 hubs)
* CONFIG_CPU_BIG_ENDIAN=y (should be the default until LE is more mature)
John Bowler [Thu, 20 Oct 2005 04:47:57 +0000 (04:47 +0000)]
openslug-kernel: cleanup, move to 2.6.14-rc4
- potentially optional parts of openslug-image can now be removed
- removed 2.6.14-rc2
- moved to 2.6.14-rc4
- added RedBoot FIS Directory automagic byte swap
John Bowler [Wed, 19 Oct 2005 23:42:10 +0000 (23:42 +0000)]
jamvm: thumb builds; force use of arm because of assembler within v 1.3.2
- the code has ARM assembler, which doesn't work when compiled -mthumb
- so disable -mthumb by setting ARM_INSTRUCTION_SET="", only affects
- thumb builds (no PR bump - it didn't even compile before.)
John Bowler [Wed, 19 Oct 2005 01:06:38 +0000 (01:06 +0000)]
uclibc: add uClibc.machine, uClibc.distro + empty defaults in uclibc.inc
- Change uclibc 0.9.28 ucslugc builds (only) to use the new mechanism
- to select ucslugc arm and armeb config
- There is no change to any build config (including ucslugc), just a
- change in mechanism.
openzaurus-3.5.4.conf: tweaked feeds list to use DISTRO_VERSION and added upgrades/${MACHINE} feed
- kernel (or other machine specific) upgrades goes to upgrades/${MACHINE}/ feed
which need to be named without "/" to protect ipkg from failing
pcmcia-cs: cleaned pcmcia config file - close bug #364
I compared pcmcia-cs 3.2.8 config with orinoco-modules and hostap-modules
config files and tried to clean pcmcia-cs/config - currently removed ALL cards
mapped to "orinoco_cs" which are defined also in hostap_cs.conf file.
Patch was reviewed and approved by Mickeyl
John Bowler [Tue, 18 Oct 2005 05:52:03 +0000 (05:52 +0000)]
perl: NSLU2: fix LE config in 5.8.7
- the existing arm (le) config will not work with NSLU2 because of the
- use of 32 bit assembler which is not thumb compatible, this change
- uses a config file derived from the BE (NSLU2) config
dhcp: added patch to fix build problem - close bug #400
- patch add <asm/types.h> into tr.c
- resolution provided by Stefan Sander <stefan-sander@gmx.de>
Justin Patrin [Sat, 15 Oct 2005 21:44:08 +0000 (21:44 +0000)]
efl, e17: update to newest versions
- fixed e-modules build on amd64
- new options evas-xrender-x11 is not disabled for fb builds
- stage new Evas_Engine_XRender_X11.h header
- remove e-utils from e-image, currently broken
Richard Purdie [Fri, 14 Oct 2005 09:00:07 +0000 (09:00 +0000)]
orinoco: Updates to versions 0.15rc1, 0.15rc2, cvs:
Remove firmware patches and use external firmware package
Remove pcmcia-cs config files and use external package
opie-stumbler: new application for scanning WiFi networks
- added both 1.2.1 and CVS versions
- icon added into metadata as author forgot to add it into upstream
Richard Purdie [Thu, 13 Oct 2005 13:25:42 +0000 (13:25 +0000)]
linux-oz-2.6: Rearrange stable patches to reflect order in mainline. Add extra collie scoop fix. Seperate corgi include fix so mainline c7x0 compiles. Update hx2750 base patch for recent mmc changes.