Staging: hv: remove OnChildDeviceRemove vmbus_driver callback

It's only ever set to one function, so just call that function instead.

Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: remove OnChildDeviceDestroy vmbus_driver callback

No one ever calls it so get rid of it, it's pointless.

Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: remove OnChildDeviceCreate vmbus_driver callback

It's only ever set to one function, so just call that function instead.

Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replaced typedef struct wl_info_t by struct wl_info.

Part of the code cleanup effort. CodingStyle doc advises to restrict the usage
of typedefs. Also moved several function declarations from .c to .h file
because this typedef replace operation induced checkpatch.pl warnings.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211 needs lots of delay.h

Fix lots of errors like:

drivers/staging/brcm80211/phy/wlc_phy_n.c:17613: error: implicit declaration of function 'mdelay'
drivers/staging/brcm80211/util/nicpci.c:246: error: implicit declaration of function 'udelay'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Dowan Kim <dowan@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Cc: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: bcmp => memcmp

s/bcmp/memcmp/

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: bzero => memset

s/bzero/memset/g

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove OSL_SYSUPTIME_SUPPORT

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove bogus gcc version checking

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove unused PKTFREESETCB

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove OSL_DMADDRWIDTH

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192u: check return code kmalloc.

This patch checks the return code of  kmalloc when trying to allocate
memory for priv->rx_urb in rtl8192_usb_initendpoints(), return -ENOMEM
when failed.

Signed-off-by: David Chosrova <david.chosrova@libertysurf.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: dds: ad9832: Fix kconfig description

The AD9832 driver doesn't support the AD9833 and AD9834

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192u: remove dead code to disable dot11d

This patch removes all the ENABLE_DOT11D ifdefs.
It is always defined for driver. DOT11D has to do with regulatory domains.

What prompted this patch was a warning message in Sparse.

drivers/staging/rtl8192u/r8192U_core.c:247:1: warning: "eqMacAddr"
redefined in file included from drivers/staging/rtl8192u/:81:81:
drivers/staging/rtl8192u/dot11d.h:35:1: warning: this is the location
of the previous definition

Now there are no ifdefs around dot11d.h it made no sense to have this
second definition, so I removed that macro as well. ( Thanks Dan ;-) ).

Acked-by. Dan Carpenter <error27@gmail.com>
Signed-off-by: David Chosrova <dada2372@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Kill struct wb_usb

This patch kills struct wb_usb which now only contains a pointer to  struct
usb_device.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Remove unused fields from struct wb_usb

This patch removes two unused fields from struct wb_usb:

  - DetectCount which is always zero

  - IsUsb20 which is a write-only struct member

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Kill wblinux_f.h header

The wblinux_f.h header file doesn't contain anything that's actually used. Kill
it.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Merge mlmetxrx.c to mds.c

This patch merges mlmetxrx.c to mds.c because it's small and the functions are
only used in mto.c.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Kill _IBSS_BEACON_SEQ_STICK_

This patch kills the _IBSS_BEACON_SEQ_STICK_ ifdefs because the macro is never
defined.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Kill write-only ->TxToggle

This patch removes ->TxToggle from struct wb35_mds because it's a write only struct member.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Kill Vendor2 ifdef from hal_init_hardware

The Vendor2 macro is never defined so remove the ifdef'd block from
hal_init_hardware().

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Remove empty sysdef.h header

The sysdef.h header is empty now so kill it.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Use pr_debug() for debugging

Use pr_debug() for debugging printk's and kill the FULL_DEBUG macro. It would
be even better to use dev_dbg() but unfortunately looking up struct device in
the current code structure makes things very ugly.

Please note that I dropped the DataDmp() calls from
RFSynthesizer_SwitchingChannel() because that function doesn't exist.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Kill unused code in mac_structures.h

This patch kills tons of unused macros and struct definitions from
mac_structures.h.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Kill WPA2 definitions

The _WPA2_ macro is always defined but the data structures that are wrapped by
it are never used. Kill them.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Kill _USE_FALLBACK_RATE_ macro

The _USE_FALLBACK_RATE_ macro parametrizes DEFAULT_RATE_RETRY_LIMIT. It's only
used in Mxx_initial() in reg.c where _USE_FALLBACK_RATE_ is always defined
because the reg.c file includes sysdef.h at the top. It's therefore safe to
remove the _USE_FALLBACK_RATE_ macro.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Remove unused defines from sysdef.h

This patch removes all the defines in sysdef.h that are not used at all.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ft1000: Fix goto error logic.

Fix goto error logic which could lead to kernel panics
because kthread_stop() is called in not correct error
conditions. Seen it sometimes when dsp_reload() fails
then I got kernel panic.

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ft1000: Remove functions which create devices in kernel space.

Remove exec_mknod() and rm_mknod() helpers which was used for
device nodes creating/removing in kernel space.

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: keucr: fix keucr init other coding style

fix keucr init.c other coding style but not from checkpatch.pl.
replace ternary conditional "?:" with if/else.

Signed-off-by: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: keucr: fix keucr init coding style

fix keucr init.c init.h coding style.
only fix coding style check by checkpatch.pl.

Signed-off-by: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: msm: tvenc: fix error handling

Driver init() function should return error code.
Also fix tvenc_clk leak.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: fix intel_sst/intelmid sound build

SND_INTELMID selects 3 SND_* kconfig symbols, but that is useless
if the SOUND & SND symbols in their hierarchy are not enabled,
so make this symbol depend on SOUND & SND.

ERROR: "snd_pcm_period_elapsed" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_card_create" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_pcm_hw_constraint_integer" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_device_new" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_pcm_set_ops" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_jack_new" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_pcm_lib_free_pages" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_pcm_lib_ioctl" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_pcm_lib_malloc_pages" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_ctl_new1" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_pcm_lib_preallocate_pages_for_all" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_card_free" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_card_register" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_jack_report" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_pcm_new" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!
ERROR: "snd_ctl_add" [drivers/staging/intel_sst/snd-intelmid.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove BUSTYPE macro

BUSTYPE isn't used in this configuration.

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unused dhd_ops_virt variable definition

The variable dhd_ops_virt was used before although its use was rather
limited as can be found in previous commit:

| commit 4fd68ae1a558043a2cc4ea2faf7235e71c3241aa
| Author: Julia Lawall <julia@diku.dk>
| Date:   Tue Oct 26 12:25:33 2010 +0200
|
|    drivers/staging/brcm80211/brcmfmac/dhd_linux.c: delete double assignment
|

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove some more packet related macros

macros PKTHEADROOM and PKTTAILROOM have been replaced by native
skbuff functions and macros PKTALLOCED and PKTUNALLOC have been
removed.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed packet macros for accessing sk_buff fields

With the packet storage type changed from void pointer to struct sk_buff
pointer there is no need for macros for accessing these fields through
casting. These can now be accessed directly.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: change packet buffer type to native struct sk_buff

The packet queues now store struct sk_buff pointer and subsequently
all driver code handling packets now use struct sk_buff as package
storage type. Next step will be getting rid of packet macros.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unneccessary packets funtion prototype

The prototype for function pktsegcnt in bmcutils.h is not defined
nor used anywhere in the driver so it can be removed.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: add include file for using semaphore related definitions

Source wl_iw.c uses semaphore definitions and as such should include
<linux/semaphore.h>.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: OSL shrink: Remove OSL_PCI_READ/WRITE_CONFIG

Replace OSL layer PCI READ/WRITE macros with native calls.

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Merge branch 'work' into staging-next

Staging: sep: do not select the driver by default

The Kconfig file should not have 'y' as the default, especially
as the driver will crash a machine if it is loaded and the hardware
is not present.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mark Allyn <mark.a.allyn@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: do not select the driver by default

The Kconfig file should not have 'y' as the default, especially
as the driver will crash a machine if it is loaded and the hardware
is not present.

Cc: Mark Allyn <mark.a.allyn@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: Fix crash if a device is not found

The existing code works mostly by luck. The PCI probe is done by the
register and completes before the register returns thus allowing the other
init code to run in time. Without a SEP or if unlucky this doesn't occur
and you get an OOPS which for some reason causes grumpiness.

As the season of good b^Hcheer is supposed to be approaching we should
probably fix it.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: clean up a couple of spots missed in pass one

Another copy_user case and some formatting of dbg

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: cant is an angular inclination

So use can't instead.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: Make SEP consistent

SEP is initials so make it consistent in the driver, ditto DMA and DCB
Consistent capitalisation of comment leads

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: Use kzalloc when needed

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: clean up some of the obvious sillies

Various assignments are done but not used
dev_dbg formatting is a bit weird and wraps when not needed
Take out some of the blank lines and reformat a bit to reduce view size
Remove some comments that are obvious
Fix else formatting
Remove some user triggerable dev_warns
Fix copy_from_user error return cases (-EFAULT not bytes copied)

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: Fix the kernel-doc in SEP

The long blurb goes at the end

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: clean up caller_id function

This is called on a kmalloc/memset object. Remove everything that isn't a
set to zero

Oh look 8)

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: netlink - what netlink

Kill unused stuff

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: handle the memrar stuff in the headers

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: handle the rar definition stuff in the header

SEP isn't the only driver that may need to handle both cases easily

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: minimal fix for wrong include

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sst: add ioctls for post processing algorithm interface

This patch adds two new ioctls to intel_sst_ctrl device.
This i/f can be used by application to send algorithm parameters

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
[This will need further discussion in the context of the final ALSA interface
 but is fine for staging, ie anyone who relies on it should expect changes
 Also fixed a missing kmalloc fail check]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sst: Construct fw string name runtime

The firmware name for each platform is appended by PCI id of device.
This patch makes use of pci id to construct the string rather than
hardcode the string.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sst: Add runtime PM support

This adds runtime PM support for audio driver.
This also fixes LPA audio mode for moorestown platform

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Use kernel functions to identify broadcasts

linux/etherdevice.h already provides functions to classify different
ethernet addresses. These inlineable functions should be used instead of
custom functions.

The check for multicast together with multicast can also be replaced
with a single test for multicast because for every ethernet address x
following is always true:

is_broadcast_ether_addr(x) => is_multicast_ether_addr(x)

or when looking more at the implementation:

(FF:FF:FF:FF:FF:FF == x) => [(01:00:00:00:00:00 & x) != 00:00:00:00:00:00]

Reported-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Use kernel version min macro

The kernel headers already provide different versions of a min/max macro
which should be used by all modules according to
Documentation/CodingStyle.

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: add gateway IPv6 support by filtering DHCPv6 messages

Some additional checks will be needed in case of extension headers
like the fragmentation or hop-by-hop (for jumbo frames for example)
headers or ipsec stuff. But this patch should do for most people
for now, the rest can be added with a later one.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: best gw DHCP filter 802.1Q support

The DHCP filter inspects packets to determine whether or not to send
them via ethernet unicast. This patch adds 802.1Q (vlan) support for
this check.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: send DHCP requests directly to the chosen gw

If the gateway client mode is active batman-adv will send the
broadcasted DHCP requests via unicast to the currently selected best
gateway. Therefore attached clients can profit from batman's knowledge
about the network topology.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: adding gateway functionality

Via the /sys filesystem you can change the gateway mode of a node using
gw_mode. Adjustments to it can be done using gw_bandwidth for server
mode and gw_sel_class for client mode.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Limit spin_locks to spin_lock_bh

spin_lock_irqsave disables the IRQs and stores them inside the flags
provided by the caller. This is needed to protect a bottom half handler
or a user context critical section from being interrupted by an
interrupt handler which also tries to acquire the spinlock and locks
forever.

The linux device drivers will receive the packets inside an interrupt
handler and the network infrastructure will process them inside bottom
half. Thus batman-adv will only run in user context and bottom half
handlers. We can conclude that batman-adv doesn't share its own
spinlocks with real interrupt handlers.

This makes it possible to exchange the quite complex spin_lock_irqsave
with spin_lock_bh which only stops bottom halves from running on the
current cpu, but allows interrupt handlers to take over to keep the
interrupt latency low.

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Rewrite hash using hlist_*

The hash implementation is a complete implementation of a hash using
buckets as hash entries and overflow buckets attached to them.

The kernel already provides datastructures hlist_head and hlist_node
which can be used to implement an hash using lists as hash buckets. So
it is better to implement heavily used functionality on top of those
instead of providing a full hash implementation.

The rewrite changes the behavior of some functions slightly:
 * hash_add add elements to the front instead of the tail
 * hash_iterate doesn't provide pointer to access bucket->data directly,
   but it can be accessed using hlist_entry

Reported-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Make hash_iterate inlineable

hash_iterate is next to the function pointers the most called function
related to hashes which benefits from inlining as it is uses in loops.

Reported-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Move hash callback related function to header

To enable inlining of the function pointers hashdata_choose_cb,
hashdata_choose_cb and hashdata_free_cb, also the hash functions which
uses them must be inlined by the called function.

This should increase the performance, but also increases the size of the
generated machine code slightly.

Reported-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Remove hashdata_choose_cb from hash

Function pointers cannot be inlined by a compiler and thus always has
the overhead of an call. hashdata_choose_cb's are one of the most often
called function pointers and its overhead must kept relative low.

As first step, every function which uses this function pointer takes it
as parameter instead of storing it inside the hash abstraction
structure.

This not generate any performance gain right now. The called functions
must also be able to be inlined by the calling functions to enable
inlining of the function pointer.

Reported-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Remove hashdata_compare_cb from hash

Function pointers cannot be inlined by a compiler and thus always has
the overhead of an call. hashdata_compare_cb's are one of the most often
called function pointers and its overhead must kept relative low.

As first step, every function which uses this function pointer takes it
as parameter instead of storing it inside the hash abstraction
structure.

This not generate any performance gain right now. The called functions
must also be able to be inlined by the calling functions to enable
inlining of the function pointer.

Reported-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Make hop_penalty configurable via sysfs

When having a mixed topology of both very mobile and rather static
nodes, you are usually best advised to set the originator interval on
all nodes to a level best suited for the most mobile node.

However, if most of the nodes are rather static, this can create a lot
of undesired overhead as a trade-off then. If setting the interval too
low on the static nodes, a mobile node might be chosen as a router for
too long, not switching away from it fast enough because of its
mobility and the low frequency of ogms of static nodes.

Exposing the hop_penalty is especially useful for the stated scenario: A
static node can keep the default originator interval, a mobile node can
select a quicker one resulting in faster route updates towards this
mobile node. Additionally, such a mobile node could select a higher hop
penalty (or even set it to 255 to disable acting as a router for other
nodes) to make it less desirable, letting other nodes avoid selecting
this mobile node as a router.

Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Ommit storing struct device in sysfs functions

We actually do not need an extra struct device variable, therefore
replacing them with defines that directly get the bat_priv or
net_device. This further reduces the code size in bat_sysfs.c and
especially shortens some macros.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Wrapper functions for sysfs storing

Sysfs configuration options that just took a boolean value
(enable(d)/disable(d)/0/1) and integer setting basically all had the same
structure.

To avoid even more copy and pasting in the future and to make introducing
new configuration parameters for batman-adv simpler, more generic
wrapper functions are being introduced with this commit. They can deal with
boolean and unsigned integer parameters, storing them in the specified
atomic_t variables.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Unify sysfs file names with their bat_priv atomics

Both sysfs entries and variable names shall be as descriptive as
possible while not exceeding a certain length. This patch renames
bat_priv atomics to be equally descriptive with their according sysfs
entries.

Unifying sysfs and bat_priv atomic names also makes it easier to find
each others pendant.

The reduced ("type"-)information which was previously indicated with a
_enabled for booleans got substituted by a comment in bat_priv.

This patch has also been done in regards for the future BAT_ATTR_*
macros (they only need one name argument instead of a file and variable
name).

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: softif bridge loop avoidance

By connecting multiple batman-adv mesh nodes to the same ethernet
segment a loop can be created when the soft-interface is bridged
into that ethernet segment. A simple visualization of the loop
involving the most common case - a LAN as ethernet segment:

node1  <-- LAN  -->  node2
   |                   |
 wifi  <-- mesh -->  wifi

Packets from the LAN (e.g. ARP broadcasts) will circle forever from
node1 or node2 over the mesh back into the LAN.

This patch adds the functionality to detect other batman-adv nodes
connected to the LAN and select a 'gateway' to talk to the
non-batman-adv devices on this LAN. All traffic from and to the mesh
will be handled by this gateway to avoid the loop. OGMs received via
the soft-interface are interpreted as 'port announcements' to locate
potential batman-adv nodes. The patch can also deal with vlans on
top of batX and offers a list of LAN neighbors via debugfs.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: reassemble fragmented skb if mtu allows it

Signed-off-by: Andreas Langer <an.langer@gmx.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: fragment forwarded packets

If a packet is too big to be forwarded over an interface it will be
fragmented on-the-fly (if fragmentation is enabled).

Signed-off-by: Andreas Langer <an.langer@gmx.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: remove redundant is_my_mac() check in route_unicast_packet

Callers should check the if the received packet is for us before it
calls route_unicast_packet.

Signed-off-by: Andreas Langer <an.langer@gmx.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: move skb reassembly of fragmented packets into dedicated function

Signed-off-by: Andreas Langer <an.langer@gmx.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: add frag_ prefix to all fragmentation related functions

Signed-off-by: Andreas Langer <an.langer@gmx.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: restructure fragmentation to handle batman unicast packets

The unicast_frag_send_skb() function expected 'raw' packets (without any
batman-adv header) to fragment them. This needs to be changed, so that
this function is able to fragment packets that already traveled inside
the mesh but need to be fragmented now.

Signed-off-by: Andreas Langer <an.langer@gmx.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: use rcu callbacks when freeing batman_if

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: convert batman_if custom refcounting to kref functions

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Don't remove interface with spinlock held

We call a lot of the netdevice code when holding if_list_lock which will
spin the whole time. This is not necessary because we only want to
protect the access to the list to be serialized. An extra queue can be
used which hold all interfaces which should be removed and then use that
queue without any locks for netdevice cleanup.

Reported-by: Rafal Lesniak <lesniak@eresi-project.org>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Add new sysfs files to README

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: ensure that eth_type_trans gets linear memory

eth_type_trans tries to pull data with the length of the ethernet header
from the skb. We only ensured that enough data for the first ethernet
header and the batman header is available in non-paged memory of the skb
and not for the ethernet after the batman header.

eth_type_trans would fail sometimes with drivers which don't ensure that
all there data is perfectly linearised.

Reported-by: Rafal Lesniak <lesniak@eresi-project.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Replace Andrew Lunn as Staging maintainer

Andrew Lunn didn't submit patches to staging since a while and may not
be the right person for new patches.

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: dac: ad5446: Remove unused sign member from chip specific information structure

Remove unused sign member from chip specific information structure
Fix typos

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: dac: ad5446: Enable driver support for AD5620/AD5640/AD5660 DA converters

Initial support for single channel, 12-/14-/16-Bit nanoDAC with On-Chip Reference

staging: iio: dac: ad5446: Fix according to review feedback

Review feedback by Jonathan Cameron:
Use kernel doc style to document headers.
Turn data into a union
Add some comments for clarity

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: documentation rewrite and cleanup of sysfs documetation

Change to capital syntax for documetation e.g. 'inX-inY_raw'
Use multiple 'What:' entries rather than wild cards or options so
as to make the documentation clearer and easier to search.
Some trivial spelling fixes.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: adis16260 add suppport for adis16255 and adis16250.

Unusual element is addition of 'negate' and 'axis' platform data
to ensure we support all the functionality of the adis16255 driver
currently in staging.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Matthias Brugger <mensch0815@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: adis16260 add id table support

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: adc: Enable driver support for ad7887 AD converter

Enable support for AD7887:  SPI Micropower, 2-Channel, 125 kSPS, 12-Bit ADC

staging: iio: adc: Fix according to review feedback

Review feedback by Jonathan Cameron:
Combine statements.
Document struct members.
Remove redundant variable initialization.
Simplify multichannel scan from ring logic.
Fix coding style.

[v2]
staging: iio: adc: ad7887: Fix typos

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: dac: Enable driver support for AD5444 and AD5446 DA converters

Enable support for AD5444 and AD5446:  12-/14-Bit High Bandwidth
Multiplying DACs with Serial Interface.

staging: iio: dac: Add support for AD5541A, AD5512A digital to analog convertors

staging: iio: dac: Fix according to review feedback

Review feedback by Jonathan Cameron:
Remove spurious new line.
Document struct members.
Remove redundant variable initialization.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove duplicated #include

Remove duplicated #include('s) in
  drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

sst: log error returned by scu ipc read/write

scu ipc driver fails sometimes to read/write. This add logs with register
addr and ret code when these errors occur.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

sst: Firmware error codes force number values

To avoid mismatch in driver and firmware error codes assign specfic values
to each enum.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

sst: Change the SST driver PCM interface

The PCM interface in SST driver is cmds only, this patch changes the interface to open, close and cmd interface.
This allows SST driver to keep easy track of handles open

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: Introduce sep driver

This driver is for the Security Processor, a dedicated encryption
and decryption driver that is used on the Intel mobile platform.

This has been checked with checkpatch and there are four
warnings for lines over 80 charactors.

There is one compile warning. This is for a function that is
only used if the rar register driver is needed. There is an
ifdef in a header file that stubs out the rar register driver
if the rar register is not configured.

This driver does add a configuration, which is CONFIG_DX_SEP.

Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>