ARM: OMAP: Convert interrupt flags SA_* to IRQF_*

Convert interrupt flags SA_* to IRQF_*

Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Fix warning in pm.c

ARM: OMAP2: Fix warning in pm.c:

arch/arm/mach-omap2/pm.c: In function 'omap2_pm_init':
arch/arm/mach-omap2/pm.c:854: warning: ignoring return value
of 'subsys_create_file', declared with attribute
warn_unused_result

Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Merge PM code from N800 tree

This patch merges omap2 PM code from N800 tree.

Patch adds support for sleep while idle for omap2
and handy serial console debbugging code. It also
moves code from pm-domain.c to pm.c.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Merge board specific files from N800 tree

This patch merges board specific files from N800 tree.
Nokia has published the files at:

http://repository.maemo.org/pool/maemo3.0/free/source/
kernel-source-rx-34_2.6.18.orig.tar.gz
kernel-source-rx-34_2.6.18-osso29.diff.gz

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Merge driver headers from N800 tree

This patch merges omap specific driver headers from
N800 tree.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Merge gpmc changes from N800 tree

This patch merges gpmc changes from N800 tree.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Mostly cosmetic to sync up with linux-omap tree

Mostly cosmetic to sync up with linux-omap tree

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: musb_hdrc: tusb dma patch, minor

Move all DMAREQ for TUSB6010 into its chip setup; it shouldn't be in
either the board-specific code, or the tusb6010 glue.  (Note, we still
aren't passing the "which channels" info to the driver...)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: omap camera builds again; Mistral init and mux

Support the camera connector on the OSK Mistral add-on board:

  - define muxing for both camera controllers
  - mux both of them for Mistral
  - teach ov9640 glue about mistral powerup/powerdown

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Make board-palmz71 compile again

ARM: OMAP: Fix compilation issues in board-palmz71.c

Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: H3 workqueue fixes

Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Fix warning in timer32k.c

ARM: OMAP: Fix warning in timer32k.c if CONFIG_NO_IDLE_HZ
isn't set:

arch/arm/plat-omap/timer32k.c:221: warning:
'omap_32k_timer_handler' defined but not used

Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: cleanup apollon board

- Add etherent gpmc handling
- Remove unused mux setting
- Add MMC switch pin comments

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: osk+mistral backlight, power, board specific

Mistral-specific:

  - Add PWL-driven LCD backlight device

  - Apply power to the board even when the LCD isn't configured; things
    like EEPROM, temperature sensor, and wakeup switch depend on it.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: board-sdp2430.c Remove unnecessary #includes

- and fix the file path.

Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: update board 2430 file for TWL PIH interrupts

This patch updates the board-2430sdp.h for TWL PIH interrupts.

Signed-off-by: Syed Mohammed Khasim <x0khasim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: I2C-1 init fix for 2430

I2C-1 for 2430 was commented previously, enabled in this patch.

Signed-off-by: Syed Mohammed Khasim <x0khasim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Fix gpmc header

Fix gpmc header

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Add omap osk defconfig

Add omap osk defconfig

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Update omap h2 defconfig

Update omap h2 defconfig

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Add DSP common code

Add DSP common code

Signed-off-by: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Add mailbox support for IVA

This patch adds a generic mailbox interface considering IVA
(Image Video Accelerator) use on 2420, but this patch itself
doesn't contain any IVA driver.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: TUSB EVM init

Add init support for the TUSB6010 EVM board, as connected to H4.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Tabify mux.c

Tabify mux.c

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Avoid updating system time for sub-jiffy interrupts

Updating system time and reprogramming timer can cause latency
issues on busy systems with lots of interrupts with constant
updating of time and reprogramming the system timer.

If a non-timer dyntick interrupt happens within a jiffy from
the last interrupt, updating time and reprogramming the timer
is unnecessary as we will get a timer interrupt soon anyways.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Sync board specific files with linux-omap

This patch syncs omap board specific files with linux-omap.

Patch consists mostly of driver updates done in linux-omap
tree for drivers not yet in mainline kernel.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Sync core code with linux-omap

This patch syncs omap specific headers with linux-omap.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Sync headers with linux-omap

This patch syncs omap specific headers with linux-omap.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: MPUIO wake updates

GPIO and MPUIO wake updates:

 - Hook MPUIOs into the irq wakeup framework too.  This uses a platform
   device to update irq enables during system sleep states, instead of
   a sys_device, since the latter is no longer needed for such things.

 - Also forward enable/disable irq wake requests to the relevant GPIO
   controller, so the top level IRQ dispatcher can (eventually) handle
   these wakeup events automatically if more than one GPIO pin needs to
   be a wakeup event source.

 - Minor tweak to the 24xx non-wakeup gpio stuff: no need to check such
   read-only data under the spinlock.

This assumes (maybe wrongly?) that only 16xx can do GPIO wakeup; without
a 15xx I can't test such stuff.

Also this expects the top level IRQ dispatcher to properly handle requests
to enable/disable irq wake, which is currently known to be wrong:  omap1
saves the flags but ignores them, omap2 doesn't even save it.  (Wakeup
events are, wrongly, hardwired in the relevant mach-omapX/pm.c file ...)
So MPUIO irqs won't yet trigger system wakeup.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Fix typo in board-h4.h

Replace OMAP1610 to OMAP2420.

Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: speed up gpio irq handling

Speedup and shrink GPIO irq handling code, by using a pointer
that's available in the irq_chip structure instead of calling
the get_gpio_bank() function.  On OMAP1 this saves 44 words,
most of which were in IRQ critical path methods.  Hey, every
few instructions help.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Set keypad sense delays for the Palms

Wait a fixed amount of time between writing to the columns
register and reading rows state to allow the keypad to respond
on Palm Tungsten E and Zire 71.  The value for Zire 71 keypad
was tested by Marek Vasut.

Signed-off-by: Andrzej Zaborowski <balrog@zabor.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: This patch enables I2C-2 support for 2430 SDP

This patch enables I2C-2 support for 2430 SDP.

Signed-off-by: Syed Mohammed Khasim <x0khasim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Basic support for siemens sx1

This adds basic support for Siemens SX1. More patches are available,
with video driver, mixer, and serial ports working. That is enough to
do gsm calls with right userland.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: plat-omap changes for 2430 SDP

This patch adds minimal OMAP2430 support to plat-omap files to
get the kernel booting on 2430SDP.

Signed-off-by: Syed Mohammed Khasim <x0khasim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Palm Zire71 minor fixes

This patch makes minor changes in palmz71 board file (formating changes) and
renames one GPIO (PALMZ71_PINTDAV_GPIO to PALMZ71_PENIRQ_GPIO) in
board-palmz71.h and board-palmz71.c .

Signed-off-by: Marek Vašut <marek.vasut@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Palm Tungsten|T support

This patch adds board file and necessary includes for Palm Tungsten|T.

Signed-off-by: Marek Vašut <marek.vasut@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: USB peripheral support on H4

H4 has two peripheral ports, one for "download" and one for OTG.
The one to use is selected through Kconfig.

NOTE:  not yet working; I suspect there's a clock still turned off
or something like that, since neither port responds.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>