Tony Lindgren [Thu, 14 Jan 2010 02:11:01 +0000 (18:11 -0800)]
Linux-omap rebuilt: updated to -rc4
$ git checkout -b tmp-rebuild-
1263435052 linus
$ git merge -m "Merge omap-fixes" omap-fixes
$ git merge -m "Merge omap-testing" omap-testing
$ git merge -m "Merge for-next" for-next
$ git merge -m "Merge cbus" cbus
$ git merge -s ours master
$ git checkout master
$ git merge tmp-rebuild-
1263435052
To view the changes since the last rebuild, please do
$ git diff
6d1ee3221f2f1125298a92b77e815556bc11c24f..
f84bd29c74be5f6fa2dafb2aca8f4dba918d5da8 arch/arm/*omap*/
Tony Lindgren [Thu, 14 Jan 2010 02:10:56 +0000 (18:10 -0800)]
Merge cbus
Tony Lindgren [Thu, 14 Jan 2010 02:10:55 +0000 (18:10 -0800)]
Merge for-next
Tony Lindgren [Thu, 14 Jan 2010 02:10:54 +0000 (18:10 -0800)]
Merge omap-testing
vikram pandita [Thu, 14 Jan 2010 02:10:34 +0000 (18:10 -0800)]
omap: zoom3: enable ehci support
Zoom3 board has omap3630 EHCI port2 connected to a ULPI phy.
GPIO_64 is connected to the PHY reset pin.
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Cc: Gadiyar, Anand <gadiyar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
vikram pandita [Thu, 14 Jan 2010 02:10:34 +0000 (18:10 -0800)]
omap: serial: fix coding style indentaion
No logical code change
Fix coding style indentaion as per checkpatch.pl
Fix multi-line comment style reported by Nishanth Menon
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Cc: Menon, Nishanth <nm@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Lesly A M [Thu, 14 Jan 2010 02:10:33 +0000 (18:10 -0800)]
omap3: pm: Add T2 Keypad as a wakeup source
Changes for setting the padconf value for sys_nirq line which is
connected to T2 INTR1. This will fix the T2 keypad wakeup.
Signed-off-by: Lesly A M <x0080970@ti.com>
Signed-off-by: Teerth Reddy <teerth@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Sriram [Thu, 14 Jan 2010 02:10:33 +0000 (18:10 -0800)]
ARCH OMAP : enable ARCH_HAS_HOLES_MEMORYMODEL for OMAP
OMAP platforms(like OMAP3530) include DSP or other co-processors
for media acceleration. when carving out memory for the
accelerators we can end up creating a hole in the memory map
of sort:
<kernel memory><hole(memory for accelerator)><kernel memory>
To handle such a memory configuration ARCH_HAS_HOLES_MEMORYMODEL
has to be enabled. For further information refer discussion at:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15262.html.
Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Thu, 14 Jan 2010 02:10:33 +0000 (18:10 -0800)]
omap: Clean-up for omap_mux_init
Get rid of the ifdeffery in omap_mux_init by creating
omap_mux_init_package and omap_mux_init_signals functions.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ladislav Michl [Thu, 14 Jan 2010 02:10:33 +0000 (18:10 -0800)]
MTD: remove no longer used OMAP flash map
All OMAP boards are now using physmap-flash.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ladislav Michl [Thu, 14 Jan 2010 02:10:32 +0000 (18:10 -0800)]
omap: convert boards to use physmap-flash
Convert OMAP based boards to use physmap-flash. Refreshed against today's
Linux omap kernel tree
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Roel Kluin [Thu, 14 Jan 2010 02:10:29 +0000 (18:10 -0800)]
OMAP: dma_chan[lch_head].flag & OMAP_DMA_ACTIVE tested twice in omap_dma_unlink_lch()
The same flag and bits were tested twice.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Thu, 14 Jan 2010 02:10:29 +0000 (18:10 -0800)]
omap: Fix cmdline muxing
Looks like cmdline muxing got broken at some point when we
decided to limit muxing to __init code. Currently omap_mux_entry
list is not yet initialized when we try to initialize cmdline
muxing.
Fix this by calling omap_mux_init_list() before calling
omap_mux_set_cmdline_signals().
Reported-by: Philip Balister <philip@balister.org>
Tested-by: Philip Balister <philip@balister.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Francisco Alecrim [Thu, 14 Jan 2010 02:10:02 +0000 (18:10 -0800)]
fix compile for tahvo-usb.c
drivers/cbus/tahvo-usb.c:138: undefined reference to 'usb_bus_start_enum'
usb_bus_start_enum only exported if USB_OTG enabled
Signed-off-by: Francisco Alecrim <francisco.alecrim@openbossa.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Francisco Alecrim [Thu, 14 Jan 2010 02:10:02 +0000 (18:10 -0800)]
n8x0_defconfig: active cbus, retu-wd and omap-wd
It's critical for correct n8x0 operation. Device turn power-off after some
seconds without these options.
Signed-off-by: Francisco Alecrim <alecrim@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Thu, 14 Jan 2010 02:10:02 +0000 (18:10 -0800)]
cbus: add platform_data to pass gpios
also add the platform_data to the related
board files.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Thu, 14 Jan 2010 02:10:01 +0000 (18:10 -0800)]
cbus: move to platform_driver
also add the platform_device to 770 and n8x0 board files.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Thu, 14 Jan 2010 02:10:01 +0000 (18:10 -0800)]
cbus: separate into several MODULE_AUTHOR entries
will look cleaner on modinfo.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Thu, 14 Jan 2010 02:10:01 +0000 (18:10 -0800)]
cbus: move EXPORT_SYMBOL close to its exported symbols
while there, also add a missing static to cbus_bus_init().
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Thu, 14 Jan 2010 02:10:00 +0000 (18:10 -0800)]
cbus: switch to kzalloc
change kmalloc() + memset() to kzalloc(), no functional
changes.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Thu, 14 Jan 2010 02:10:00 +0000 (18:10 -0800)]
cbus: tahvo-usb: make it build again
plenty of legacy code sitting there. Make it build
again. Later patches will come to clean that up.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Thu, 14 Jan 2010 02:09:59 +0000 (18:09 -0800)]
cbus: Make retu watchdog behave like a standard Linux watchdog
Make retu watchdog behave like a standard Linux watchdog.
Let the kernel do the kicking until the watchdog device is opened.
Note: We should remove the old non-standard interface, please
change to use standard /dev/watchdog instead.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Thu, 14 Jan 2010 02:09:59 +0000 (18:09 -0800)]
cbus: Fix compile and don't try to use tag
Fix compile and don't try to use tag
This should be really passed as platform_data from
the board-*.c files.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Thu, 14 Jan 2010 02:09:59 +0000 (18:09 -0800)]
omap: Search and replace headers to use plat
Search and replace headers to use plat
Signed-off-by: Tony Lindgren <tony@atomide.com>
Juha Yrjola [Thu, 14 Jan 2010 02:09:58 +0000 (18:09 -0800)]
omap: Add drivers/cbus support
CBUS is the bus that Energy Management ASICs are connected to on
some Nokia mobile devices. Added support for CBUS and two EM ASIC
drivers.
This commit is a merge of all the commits that were in the linux-omap
tree:
aae6da6d5f09307b1feb391a47d1ddb6bf2d523e CBUS: Switch to gpio_request/free calls
702e65cebefe0af8ac4a648286f229947f3e1b68 cbus build fixes
f03fdeddbbaafb57f0f62629a316036f270a973d use gpio_to_irq (OMAP tree only)
570f10b7d3aaa3d542b749622df2a1f86e54ebc3 use gpio_direction_output (OMAP tree only)
d59842e6881e8f58cb17de5c0d11866796347d50 use gpio_direction_input (OMAP tree only)
7270f33b7b0139f40fcfbf771dc5ec5a773a71cd use standard gpio get/set calls (OMAP tree only)
f228a725b975832ac5771ab2fc86d06bd694cdb3 ARM: OMAP: Remove io_p2v, use ioremap and XXX_IO_ADDRESS
fdee8764947cde1e6933e7d981ce5b9de00e83e6 Merge current mainline tree into linux-omap tree
5061bcd119547453b32c847d2b9490a052bc1755 Merge mainline v2.6.27-rc2 tree into linux-omap tree
2d46b9c984d1c862f2525b4d0cabcb092f77ac64 CBUS: A workaround for ADC S/H HW bug: always keep ch 8 selected when S/H is used
648f41f57c2bfa7152f0760ca29a1e9dac566ca4 USB: Change omap USB code to use omap_read/write instead of __REG for multi-omap
d305c615bb7f85d49788a4ed28cb6aace2317ab7 ARM: OMAP: Misc compile fixes
bfbd53fcc738ff33ebcf91bc3ef25ae637cc4175 CBUS: Checkpatch.pl fixes for retu-wdt.c
2d28be5848928fbb17952e8eb5295fb506e0c40e CBUS: Fix retu mutex handling
7faa6dd4ae4db44f9c3142484266e17080314d79 CBUS: Fix retu-headset driver by not using removed input_dev->private field
8964c7d13133723ef2fe6a2b798a3fd336b15f4e ARM: OMAP: Add return value check for input_register_device()
2cf7bc8a039d6a6b4558c8c3a319ea15eccab60c CBUS: Fix retu-headset driver by not using removed input_dev->cdev field
97b705ad835f1481270c4b67b402d6e37fa8ad15 ARM: OMAP: Misc compile fixes after syncing with mainline
488de021a75771df95473c85bfaa9c8f1c9db659 tahvo-usb: compile fix usb/gadget.h
d079a1c74ea46f75cc406838c45652b97205e6be CBUS: Do not BUG_ON in retu-headset in case of spurious release event
074e3419440ba83e659be554f827e928826b512d CBUS: Fix reentrant issues in retu-headset driver
9afd4b705891e8afd505ecabec25539b22416d7a CBUS: Manage bias voltage in retu-headset suspend/resume code
0de1ae4b1cee28514dec435bf58c4b5960dfb4e1 CBUS: Cleanup retu-headset driver
dff99b718dffb5c041c99eebb3607f411d377f4d ARM: OMAP: Misc compile fixes after updating to current mainline tree
e0f2c271e0e3feaab8f8190b39876683099d3f6a ARM: OMAP: Fix inconsistency of completion in retu-rtc
6cda72c73944cc50250b3ae959174b6778d5e19f ARM: OMAP: Fix USB compilation for N770 defconfig
d041f80e997ff7c21b14fdee920a034e576aa226 CBUS: Add driver for Retu/Vilma headset detection
699d8412c1bf505f24d1a2048b49b8ffd8fe1d00 ARM: OMAP: Clean up bitrot to sync with mainline
ba9ca80b6468c5500a84a5c5e84383a6925a0bc3 ARM: OMAP: Convert driver interrupt flags SA_* to IRQF_*
7adeaaa4390dff8dcd4e44e6bcb144befcc2816f ARM: OMAP: Workqueue changes for retu-rtc
708739a058a59b76f72062bda81fb961e05d61e8 ARM: OMAP: Workqueue changes for tahvo-usb
995dda5fa21c77d337fa2fc07914ecb15cd08e54 ARM: OMAP: Fix warnings in N770 build
e2f0b012fd0fc16899dcdabc0b43fabdfdadcd8c ARM: OMAP: Fix broken N770 build (tahvo-usb)
d5c772f519236d8683b460e5da37f4a943ca4aae Fix some pt_regs users
229b59cdb41742aa4aee3628962af6ef2c4d944a Sync with mainline: Get rid of unnecessary pt_regs
b983452be56be4169233c34be1134e8030be674b Sync with mainline: Get rid of <#include linux/config.h>
77845293a4eb6cfea806ecc74ea9988c044a76bc CBUS: Retu: add atomic set and clear register bits function
d2db44bd92af99576cdf976f7dfc95f54884b14d CBUS: Tahvo: add atomic set and clear register bits function
e19cba0ecf9dd2d9adfdba175e335aebe973023a CBUS: Enable suspend wakeup for Retu IRQ
8c81aa40bea255769f13449dfb7699552ddb8438 Merge source.mvista.com:/home/git/linux-omap-2.6
1230366a669d16c7a292586adc7ab0725395f5b4 Manual merge to make things compile after updating to 2.6.18-rc4
6b411907432fe97bce3e6a253f6b98ab6c105efc CBUS: turn off tahvo-usb OTG idle mode during enabling
e3b2a7b6c6bcb4d6e839695fdac3e23b86046f98 CBUS: Make Retu RTC and Tahvo USB drivers use sysfs_notify
fe3702054f6412aea04373ceb9d27a4a417ff3f0 OMAP: Fix USB on Nokia 770
9c926661738080ee298bc3a51240dd102973fa61 [PATCH] ARM: OMAP: tahvo_user: sem2mutex conversion
ea90ef431139e4ac40b1d08726f45283f98d50ef [PATCH] ARM: OMAP: tahvo usb: sem2mutex conversion
06563a863d399ab6a3a5c104ddf086030f33b6f6 [PATCH] ARM: OMAP: retu-user: sem2mutex conversion
72a222f41989a4b8ad8cddf62c47608ad2e9e358 [PATCH] ARM: OMAP: retu-rtc: sem2mutex conversion
7508d984603f5ce3cb6883c229c97ed0a35d24c6 [PATCH] CBUS: Fix tahvo-usb omap_otg_remove
07f4f04763e2ff4333d44bec438d4bacbea0b4ae CBUS: Convert Retu power button driver to use input_allocate_device()
c604ff0bb1bbd3c6bf14bb9e5cae67c5a89e4ece cbus: Update tahvo-usb for kernel API changes.
f5c9432bb9bd44968cb785e3bb8aad95d6af3431 [PATCH] ARM: OMAP: gpio-switch and retu-rtc kobject_uevent() fixes
517df76f9295ac1865494476e8b531c65232dc5a ARM: OMAP: Replace clock.h with clk.h
93cb1e87df6ac03d315c0408634831e7db898a77 ARM: OMAP: Support for new Retu chips
480a299b3f3a5302f068fb7e3c68069ab3d355a5 ARM: OMAP: Support for 7-bit backlight register on new Tahvo chips
19deb6846965d9fdd5a87cae3593a953ccfea778 ARM: OMAP: Add CBUS support
Tony Lindgren [Thu, 14 Jan 2010 02:09:55 +0000 (18:09 -0800)]
i2c-omap: Fix reg_shift init
Otherwise register access won't work during probe
for omap_i2c_unidle.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cory Maccarrone [Thu, 14 Jan 2010 02:09:55 +0000 (18:09 -0800)]
Add support for 16-bit registers
The current i2c-omap driver is set up for 32-bit registers, which
corresponds to most OMAP devices. However, OMAP730/850 based
devices use a 16-bit register size.
This change modifies the driver to perform a runtime CPU type check
to determine the register sizes, and uses a bit shift of either 1
or 2 bits to compute the proper register sizes for all registers.
Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Marek Belisko [Thu, 14 Jan 2010 02:09:54 +0000 (18:09 -0800)]
mmc-omap: Add support for 16-bit and 32-bit registers
The omap850 and omap730 use 16-bit registers instead of 32-bit, requiring
a modification of the register addresses in the mmc-omap driver. To resolve
this, a bit shift is performed on base register addresses, either by 1 or 2
bits depending on the CPU in use. This yields the correct registers for
each CPU.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ajay Kumar Gupta [Thu, 14 Jan 2010 02:09:54 +0000 (18:09 -0800)]
ehci: fix missing kfree in remove path also
Added missing kfree() in ehci_hcd_omap_remove().
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Linus Torvalds [Wed, 13 Jan 2010 05:15:00 +0000 (21:15 -0800)]
Linux 2.6.33-rc4
Linus Torvalds [Wed, 13 Jan 2010 05:13:06 +0000 (21:13 -0800)]
Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
pmu_battery: Fix battery full reporting
Bryn M. Reeves [Thu, 12 Nov 2009 18:31:54 +0000 (18:31 +0000)]
[SCSI] megaraid_sas: remove sysfs poll_mode_io world writeable permissions
/sys/bus/pci/drivers/megaraid_sas/poll_mode_io defaults to being
world-writable, which seems bad (letting any user affect kernel driver
behavior).
This turns off group and user write permissions, so that on typical
production systems only root can write to it.
Signed-off-by: Bryn M. Reeves <bmr@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 13 Jan 2010 05:04:04 +0000 (21:04 -0800)]
Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux:
OMAP: DSS2: OMAPFB: fix crash when panel driver was not loaded
OMAP: DSS2: Reject scaling settings when they cannot be supported
OMAP: DSS2: Make check-delay-loops consistent
OMAP: DSS2: OMAPFB: fix omapfb_free_fbmem()
video/omap: add __init/__exit macros to drivers/video/omap/lcd_htcherald.c
OMAP: DSS2: Fix compile warning
MAINTAINERS: Combine DSS2 and OMAPFB2 into one entry
MAINTAINERS: change omapfb maintainer
OMAP: OMAPFB: add dummy release function for omapdss
OMAP: OMAPFB: fix clk_get for RFBI
OMAP: DSS2: RFBI: convert to new kfifo API
OMAP: DSS2: Fix crash when panel doesn't define enable_te()
OMAP: DSS2: Collect interrupt statistics
OMAP: DSS2: DSI: print debug DCS cmd in hex
OMAP: DSS2: DSI: fix VC channels in send_short and send_null
Dave Chinner [Tue, 12 Jan 2010 06:39:16 +0000 (17:39 +1100)]
lib: Introduce generic list_sort function
There are two copies of list_sort() in the tree already, one in the DRM
code, another in ubifs. Now XFS needs this as well. Create a generic
list_sort() function from the ubifs version and convert existing users
to it so we don't end up with yet another copy in the tree.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Artem Bityutskiy <dedekind@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Jones [Tue, 12 Jan 2010 21:59:52 +0000 (16:59 -0500)]
remove my email address from checkpatch.
Maybe this will stop people emailing me about it.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 13 Jan 2010 04:56:20 +0000 (20:56 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: retry link resume if necessary
ata_piix: enable 32bit PIO on SATA piix
sata_promise: don't classify overruns as HSM errors
Linus Torvalds [Wed, 13 Jan 2010 04:56:01 +0000 (20:56 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: Ensure ARMv6/7 mm files are built using appropriate assembler options
ARM: Fix wrong dmb
ARM: 5874/1: serial21285: fix disable_irq-from-interrupt-handler deadlock
ARM: 5873/1: ARM: Fix the reset logic for ARM RealView boards
ARM: 5872/1: ARM: include needed linux/cpu.h in asm/cpu.h
ARM: 5871/1: arch/arm: Fix build failure for lpd7a404_defconfig caused by missing includes
ARM: 5870/1: arch/arm: Fix build failure for defconfigs without CONFIG_ISA_DMA_API set
ARM: 5868/1: ARM: fix "BUG: using smp_processor_id() in preemptible code"
ARM: 5867/1: Update U300 defconfig
ARM: 5866/1: arm ptrace: use unsigned types for kernel pt_regs
[ARM] pxa: fix strange characters in zaurus gpio .desc
ARM: add missing recvmmsg syscall number
[ARM] pxa: fix compiler warnings of unused variable 'id' in cpu_is_pxa9*()
[ARM] pxa: update pwm_backlight->notify() to include missed 'struct device *'
[ARM] pxa: enable L2 if present in XSC3
[ARM] pxa: do not enable L2 after MMU is enabled
Linus Torvalds [Wed, 13 Jan 2010 04:55:31 +0000 (20:55 -0800)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (22 commits)
MIPS: Ignore vmlinux.*
MIPS: Move vmlinux.ecoff to arch/mips/boot
MIPS: cpumask_of_node() should handle -1 as a node
MIPS: Octeon: Use non-overflowing arithmetic in sched_clock
MIPS: Malta, PowerTV: Remove unnecessary "Linux started"
MIPS: BCM63xx: Remove duplicate CONFIG_CMDLINE.
MIPS: AR7: Remove unused prom_getchar()
MIPS: PowerTV: Remove extra r4k_clockevent_init() call
MIPS: Cobalt use strlcat() for the command line arguments
MIPS: Octeon: Add sched_clock() to csrc-octeon.c
MIPS: TXx9: Cleanup builtin-cmdline processing
MIPS: PowerTV: simplify prom_init_cmdline() and merge into prom_init()
MIPS: PowerTV: Remove unused platform_die()
MIPS: PowerTV: Remove mips_machine_halt()
MIPS: PowerTV: Remove unused ptv_memsize
MIPS: PowerTV: Remove unused prom_getcmdline()
MIPS: AR7: Remove kgdb_enabled
MIPS: Alchemy: Correct code taking the size of a pointer
MIPS: BCM63xx: Fix whitespace damaged board_bcm963xx.c
MIPS: VR41xx: Use strlcat() for the command line arguments
...
Linus Torvalds [Wed, 13 Jan 2010 04:54:52 +0000 (20:54 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: hda - Fix ALC861-VD capture source mixer
ALSA: ac97: add AC97 STMicroelectronics' codecs
ALSA: ac97: Add Dell Dimension 2400 to Headphone/Line Jack Sense blacklist
ASoC: Fix WM8350 DSP mode B configuration
sbawe: fix memory detection part 2
sound: oss: off by one bug
ALSA: usb-audio - Avoid Oops after disconnect
ALSA: test off by one in setsamplerate()
ALSA: atiixp: Specify codec for Foxconn RC4107MA-RS2
Linus Torvalds [Wed, 13 Jan 2010 04:53:29 +0000 (20:53 -0800)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits)
sky2: Fix oops in sky2_xmit_frame() after TX timeout
Documentation/3c509: document ethtool support
af_packet: Don't use skb after dev_queue_xmit()
vxge: use pci_dma_mapping_error to test return value
netfilter: ebtables: enforce CAP_NET_ADMIN
e1000e: fix and commonize code for setting the receive address registers
e1000e: e1000e_enable_tx_pkt_filtering() returns wrong value
e1000e: perform 10/100 adaptive IFS only on parts that support it
e1000e: don't accumulate PHY statistics on PHY read failure
e1000e: call pci_save_state() after pci_restore_state()
netxen: update version to 4.0.72
netxen: fix set mac addr
netxen: fix smatch warning
netxen: fix tx ring memory leak
tcp: update the netstamp_needed counter when cloning sockets
TI DaVinci EMAC: Handle emac module clock correctly.
dmfe/tulip: Let dmfe handle DM910x except for SPARC on-board chips
ixgbe: Fix compiler warning about variable being used uninitialized
netfilter: nf_ct_ftp: fix out of bounds read in update_nl_seq()
mv643xx_eth: don't include cache padding in rx desc buffer size
...
Fix trivial conflict in drivers/scsi/cxgb3i/cxgb3i_offload.c
Greg Ungerer [Wed, 13 Jan 2010 00:42:05 +0000 (10:42 +1000)]
m68knommu: fix definitions of __pa() and __va()
Fix compilation breakage of all m68knommu targets:
CC arch/m68knommu/kernel/asm-offsets.s
In file included from include/linux/sched.h:77,
from arch/m68knommu/kernel/asm-offsets.c:12:
include/linux/percpu.h: In function 'per_cpu_ptr_to_phys':
include/linux/percpu.h:161: error: implicit declaration of function 'virt_to_phy
This is broken in linux-2.6.33-rc3.
Change the definitions of __pa() and __va() to not use virt_to_phys()
and phys_to_virt(). Trivial 1:1 conversion required for the non-MMU case.
A side effect if this is that the m68knommu can now use asm/virtconvert.h
for the definition of virt_to_phys() and phys_to_virt().
Also cleaned up the definition of page_to_phys() when moving into
virtconvert.h.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Mon, 11 Jan 2010 02:14:44 +0000 (11:14 +0900)]
libata: retry link resume if necessary
Interestingly, when SIDPR is used in ata_piix, writes to DET in
SControl sometimes get ignored leading to detection failure. Update
sata_link_resume() such that it reads back SControl after clearing DET
and retry if it's not clear.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: fengxiangjun <fengxiangjun@neusoft.com>
Reported-by: Jim Faulkner <jfaulkne@ccs.neu.edu>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Mon, 11 Jan 2010 08:03:11 +0000 (17:03 +0900)]
ata_piix: enable 32bit PIO on SATA piix
Commit
871af1210f13966ab911ed2166e4ab2ce775b99d enabled 32bit PIO for
PATA piix but didn't for SATA. There's no reason not to use 32bit PIO
on SATA piix. Enable it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Mikael Pettersson [Sat, 9 Jan 2010 22:32:06 +0000 (23:32 +0100)]
sata_promise: don't classify overruns as HSM errors
When sata_promise encounters an overrun or underrun error it
translates that to a libata AC_ERR_HSM, causing a hard reset.
Since over/under-runs were thought to be rare and transient,
this action seemed reasonable.
Unfortunately it turns out that the controller throws overrun
errors when e.g. hal polls a CD or DVD writer containing blank
media, causing long sequences of hard resets and retries before
EH finally gives up.
This patch updates sata_promise to classify over/under-runs as
AC_ERR_OTHER instead. This allows libata EH and upper layers to
retry or fail the operation as they see fit without the disruption
caused by repeated hard resets.
This fixes a problem using a DVD-RAM drive with sata_promise,
reported by Thomas Schorpp. I also tested it on a DVD-RW drive.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Tested-by: thomas schorpp <thomas.schorpp@googlemail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Russell King [Tue, 12 Jan 2010 19:02:05 +0000 (19:02 +0000)]
ARM: Ensure ARMv6/7 mm files are built using appropriate assembler options
A kernel with both ARMv6 and ARMv7 selected results in build errors.
Fix this by specifying the proper architectures for these assembly
files.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 12 Jan 2010 18:59:16 +0000 (18:59 +0000)]
ARM: Fix wrong dmb
The __kuser_cmpxchg code uses an ARMv6 dmb instruction, rather than
one based upon the architecture being built for. Switch to using
the macro provided for this purpose, which also eliminates the
need for an ifdef.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Yoichi Yuasa [Fri, 18 Dec 2009 12:14:19 +0000 (21:14 +0900)]
MIPS: Ignore vmlinux.*
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/795/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Yoichi Yuasa [Fri, 18 Dec 2009 12:13:17 +0000 (21:13 +0900)]
MIPS: Move vmlinux.ecoff to arch/mips/boot
It moves to the same directory as the boot files in other formats.
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/796/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Anton Blanchard [Wed, 6 Jan 2010 04:55:13 +0000 (15:55 +1100)]
MIPS: cpumask_of_node() should handle -1 as a node
pcibus_to_node can return -1 if we cannot determine which node a pci bus
is on. If passed -1, cpumask_of_node will negatively index the lookup array
and pull in random data:
# cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus
00000000,
00000003,
00000000,
00000000
# cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist
64-65
Change cpumask_of_node to check for -1 and return cpu_all_mask in this
case:
# cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus
ffffffff,
ffffffff,
ffffffff,
ffffffff
# cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist
0-127
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Patchwork: http://patchwork.linux-mips.org/patch/831/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 8 Jan 2010 22:47:36 +0000 (14:47 -0800)]
MIPS: Octeon: Use non-overflowing arithmetic in sched_clock
With typical mult and shift values, the calculation for Octeon's sched_clock
overflows when using 64-bit arithmetic. Use 128-bit calculations instead.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/849/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Yoichi Yuasa [Sun, 3 Jan 2010 05:47:34 +0000 (14:47 +0900)]
MIPS: Malta, PowerTV: Remove unnecessary "Linux started"
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/813/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Yoichi Yuasa [Sun, 3 Jan 2010 05:39:11 +0000 (14:39 +0900)]
MIPS: BCM63xx: Remove duplicate CONFIG_CMDLINE.
Builtin cmdline is copied by arch_mem_init().
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/812/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Yoichi Yuasa [Sun, 3 Jan 2010 05:13:04 +0000 (14:13 +0900)]
MIPS: AR7: Remove unused prom_getchar()
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/811/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David VomLehn [Tue, 22 Dec 2009 01:43:42 +0000 (17:43 -0800)]
MIPS: PowerTV: Remove extra r4k_clockevent_init() call
A call to r4k_clocksource_init() was added to plat_time_init(), but
when init_mips_clock_source() calls the same function, boot fails in
clockevents_register_device(). This patch removes the extraneous call.
Signed-off-by: David VomLehn <dvomlehn@cisco.com>
Patchwork: http://patchwork.linux-mips.org/patch/803/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Yoichi Yuasa [Thu, 24 Dec 2009 08:06:34 +0000 (17:06 +0900)]
MIPS: Cobalt use strlcat() for the command line arguments
Tested with CoLo v1.22
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/807/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Wed, 23 Dec 2009 21:18:54 +0000 (13:18 -0800)]
MIPS: Octeon: Add sched_clock() to csrc-octeon.c
With the advent of function graph tracing on MIPS, Octeon needs a high
precision sched_clock() implementation. Without it, most timing
numbers are reported as 0.000.
This new sched_clock just uses the 64-bit cycle counter appropriately
scaled.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/805/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Atsushi Nemoto [Mon, 21 Dec 2009 15:48:57 +0000 (00:48 +0900)]
MIPS: TXx9: Cleanup builtin-cmdline processing
Since commit
898d357b5262f9e26bc2418e01f8676e80d9867e (lmo) /
6acc7d485c24c00e111c61b2e6dff9180faebcae (kernel.org) ("Fix and enhance
built-in kernel command line") arcs_cmdline[] does not contain built-in
command line. The commit introduce CONFIG_CMDLINE_BOOL and
CONFIG_CMDLINE_OVERRIDE to control built-in command line, and now we can
use them instead of platform-specific built-in command line processing.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Patchwork: http://patchwork.linux-mips.org/patch/802/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Yoichi Yuasa [Fri, 18 Dec 2009 12:38:37 +0000 (21:38 +0900)]
MIPS: PowerTV: simplify prom_init_cmdline() and merge into prom_init()
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/801/
Reviewed-by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Yoichi Yuasa [Fri, 18 Dec 2009 12:36:32 +0000 (21:36 +0900)]
MIPS: PowerTV: Remove unused platform_die()
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/800/
Reviewed-by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Yoichi Yuasa [Fri, 18 Dec 2009 12:33:46 +0000 (21:33 +0900)]
MIPS: PowerTV: Remove mips_machine_halt()
mips_machine_halt() is same as mips_machine_restart(). Also delete the
registration of _machine_halt and pm_power_off because mips_machine_halt()
is the restart function.
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/798/
Reviewed-by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Yoichi Yuasa [Fri, 18 Dec 2009 12:30:18 +0000 (21:30 +0900)]
MIPS: PowerTV: Remove unused ptv_memsize
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/799/
Reviewed-by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Yoichi Yuasa [Fri, 18 Dec 2009 12:29:17 +0000 (21:29 +0900)]
MIPS: PowerTV: Remove unused prom_getcmdline()
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/797/
Reviewed-by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Yoichi Yuasa [Fri, 18 Dec 2009 12:20:24 +0000 (21:20 +0900)]
MIPS: AR7: Remove kgdb_enabled
An unused leftover from the old KGDB implementation.
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/794/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Julia Lawall [Sun, 13 Dec 2009 11:40:39 +0000 (12:40 +0100)]
MIPS: Alchemy: Correct code taking the size of a pointer
sizeof(dp) is just the size of the pointer. Change it to the size of the
referenced structure.
A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression *x;
expression f;
type T;
@@
*f(...,(T)x,...)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Patchwork: http://patchwork.linux-mips.org/patch/789/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Sat, 12 Dec 2009 16:57:39 +0000 (17:57 +0100)]
MIPS: BCM63xx: Fix whitespace damaged board_bcm963xx.c
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Yoichi Yuasa [Thu, 10 Dec 2009 05:00:39 +0000 (14:00 +0900)]
MIPS: VR41xx: Use strlcat() for the command line arguments
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/784/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Wu Zhangjin [Thu, 10 Dec 2009 14:55:13 +0000 (22:55 +0800)]
MIPS: Cleanup and Fixup of compressed kernel support
o Remove the .initrd section. The initrd section was already handled
when vmlinux was linked.
o Discard .MIPS.options, .options, .pdr, .reginfo, .comment and .note
sections. If .MIPS.options is not removed, kernels compiled with gcc
3.4.6 will not boot.
o Clean up the file format.
o Remove several other unneeded sections.
Tested with GCC 3.4.6 and 4.4.1 with and without initrd.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/785/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 4 Dec 2009 01:43:54 +0000 (17:43 -0800)]
MIPS: Cleanup forgotten label_module_alloc in tlbex.c
commit
c8af165342e83a4eb078c9607d29a7c399d30a53 (lmo) rsp.
e0cc87f59490d7d62a8ab2a76498dc8a2b64927a (kernel.org) left
label_module_alloc unused. Remove it now.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/752/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Takashi Iwai [Tue, 12 Jan 2010 16:50:06 +0000 (17:50 +0100)]
Merge branch 'fix/asoc' into for-linus
Takashi Iwai [Tue, 12 Jan 2010 16:50:03 +0000 (17:50 +0100)]
Merge branch 'fix/hda' into for-linus
Takashi Iwai [Tue, 12 Jan 2010 13:00:11 +0000 (14:00 +0100)]
ALSA: hda - Fix ALC861-VD capture source mixer
The capture source or input source mixer element wasn't created properly
for ALC861-VD codec due to the wrong NID passed to
alc_auto_create_input_ctls().
References: Novell bnc#568305
http://bugzilla.novell.com/show_bug.cgi?id=568305
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>
Jarek Poplawski [Mon, 4 Jan 2010 08:48:41 +0000 (08:48 +0000)]
sky2: Fix oops in sky2_xmit_frame() after TX timeout
During TX timeout procedure dev could be awoken too early, e.g. by
sky2_complete_tx() called from sky2_down(). Then sky2_xmit_frame()
can run while buffers are freed causing an oops. This patch fixes it
by adding netif_device_present() test in sky2_tx_complete().
Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=14925
With debugging by: Mike McCormack <mikem@ring3k.org>
Reported-by: Berck E. Nash <flyboy@gmail.com>
Tested-by: Berck E. Nash <flyboy@gmail.com>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tomi Valkeinen [Thu, 7 Jan 2010 15:45:03 +0000 (17:45 +0200)]
OMAP: DSS2: OMAPFB: fix crash when panel driver was not loaded
If the panel's probe had failed, omapfb would still go on, eventually
crashing.
A better fix would be to handle each display properly, and leaving just
the failed display out. But that is a bigger change.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Ville Syrjälä [Fri, 8 Jan 2010 09:56:41 +0000 (11:56 +0200)]
OMAP: DSS2: Reject scaling settings when they cannot be supported
If the scaling ratio is below 0.5 video output width can't be identical
to the display width. Reject such settings.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Takashi Iwai [Tue, 12 Jan 2010 08:40:48 +0000 (09:40 +0100)]
Merge remote branch 'alsa/fixes' into fix/misc
Tony Lindgren [Tue, 12 Jan 2010 01:23:55 +0000 (17:23 -0800)]
Linux-omap rebuilt: omap-fixes merged into mainline
$ git checkout -b tmp-rebuild-
1263259427 linus
$ git merge -m "Merge omap-fixes" omap-fixes
$ git merge -m "Merge omap-testing" omap-testing
$ git merge -m "Merge for-next" for-next
$ git merge -m "Merge cbus" cbus
$ git merge -s ours master
$ git checkout master
$ git merge tmp-rebuild-
1263259427
To view the changes since the last rebuild, please do
$ git diff
568a9be93b1af122126b01fc57f66856228d6f81..
ee417bb24bcc9a1c5730d8ee10e8717afd41b5e2 arch/arm/*omap*/
Tony Lindgren [Tue, 12 Jan 2010 01:23:50 +0000 (17:23 -0800)]
Merge cbus
Tony Lindgren [Tue, 12 Jan 2010 01:23:49 +0000 (17:23 -0800)]
Merge for-next
Tony Lindgren [Tue, 12 Jan 2010 01:23:48 +0000 (17:23 -0800)]
Merge omap-testing
Tony Lindgren [Tue, 12 Jan 2010 01:22:21 +0000 (17:22 -0800)]
i2c-omap: Fix reg_shift init
Otherwise register access won't work during probe
for omap_i2c_unidle.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ananth N Mavinakayanahalli [Mon, 11 Jan 2010 23:51:04 +0000 (15:51 -0800)]
Revert "x86, apic: Use logical flat on intel with <= 8 logical cpus"
Revert commit
2fbd07a5f5d1295fa9b0c0564ec27da7c276a75a, as this commit
breaks an IBM platform with quad-core Xeon cpu's.
According to Suresh, this might be an IBM platform issue, as on other
Intel platforms with <= 8 logical cpu's, logical flat mode works fine
irespective of physical apic id values (inline with the xapic
architecture).
Revert this for now because of the IBM platform breakage.
Another version will be re-submitted after the complete analysis.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Hutchings [Mon, 11 Jan 2010 23:53:45 +0000 (15:53 -0800)]
Documentation/3c509: document ethtool support
3c509 was changed to support ethtool in 2002, making the 'xcvr' module
parameter obsolete in most cases. More recently 3c509 was converted
to the modern driver model and this parameter was removed. Fix the
documentation to refer to ethtool rather than the module parameter.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
vikram pandita [Mon, 11 Jan 2010 23:53:24 +0000 (15:53 -0800)]
omap: zoom3: enable ehci support
Zoom3 board has omap3630 EHCI port2 connected to a ULPI phy.
GPIO_64 is connected to the PHY reset pin.
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Cc: Gadiyar, Anand <gadiyar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
vikram pandita [Mon, 11 Jan 2010 23:53:24 +0000 (15:53 -0800)]
omap: serial: fix coding style indentaion
No logical code change
Fix coding style indentaion as per checkpatch.pl
Fix multi-line comment style reported by Nishanth Menon
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Cc: Menon, Nishanth <nm@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Lesly A M [Mon, 11 Jan 2010 23:53:23 +0000 (15:53 -0800)]
omap3: pm: Add T2 Keypad as a wakeup source
Changes for setting the padconf value for sys_nirq line which is
connected to T2 INTR1. This will fix the T2 keypad wakeup.
Signed-off-by: Lesly A M <x0080970@ti.com>
Signed-off-by: Teerth Reddy <teerth@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Sriram [Mon, 11 Jan 2010 23:53:23 +0000 (15:53 -0800)]
ARCH OMAP : enable ARCH_HAS_HOLES_MEMORYMODEL for OMAP
OMAP platforms(like OMAP3530) include DSP or other co-processors
for media acceleration. when carving out memory for the
accelerators we can end up creating a hole in the memory map
of sort:
<kernel memory><hole(memory for accelerator)><kernel memory>
To handle such a memory configuration ARCH_HAS_HOLES_MEMORYMODEL
has to be enabled. For further information refer discussion at:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15262.html.
Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 11 Jan 2010 23:53:23 +0000 (15:53 -0800)]
omap: Clean-up for omap_mux_init
Get rid of the ifdeffery in omap_mux_init by creating
omap_mux_init_package and omap_mux_init_signals functions.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ladislav Michl [Mon, 11 Jan 2010 23:53:23 +0000 (15:53 -0800)]
MTD: remove no longer used OMAP flash map
All OMAP boards are now using physmap-flash.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ladislav Michl [Mon, 11 Jan 2010 23:53:22 +0000 (15:53 -0800)]
omap: convert boards to use physmap-flash
Convert OMAP based boards to use physmap-flash. Refreshed against today's
Linux omap kernel tree
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Jarek Poplawski [Sun, 10 Jan 2010 22:04:19 +0000 (22:04 +0000)]
af_packet: Don't use skb after dev_queue_xmit()
tpacket_snd() can change and kfree an skb after dev_queue_xmit(),
which is illegal.
With debugging by: Stephen Hemminger <shemminger@vyatta.com>
Reported-by: Michael Breuer <mbreuer@majjas.com>
With help from: David S. Miller <davem@davemloft.net>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Tested-by: Michael Breuer<mbreuer@majjas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Francisco Alecrim [Fri, 8 Jan 2010 01:03:12 +0000 (01:03 +0000)]
fix compile for tahvo-usb.c
drivers/cbus/tahvo-usb.c:138: undefined reference to 'usb_bus_start_enum'
usb_bus_start_enum only exported if USB_OTG enabled
Signed-off-by: Francisco Alecrim <francisco.alecrim@openbossa.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cory Maccarrone [Sun, 13 Dec 2009 01:54:02 +0000 (01:54 +0000)]
Add support for 16-bit registers
The current i2c-omap driver is set up for 32-bit registers, which
corresponds to most OMAP devices. However, OMAP730/850 based
devices use a 16-bit register size.
This change modifies the driver to perform a runtime CPU type check
to determine the register sizes, and uses a bit shift of either 1
or 2 bits to compute the proper register sizes for all registers.
Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Marek Belisko [Sat, 9 Jan 2010 17:52:16 +0000 (17:52 +0000)]
mmc-omap: Add support for 16-bit and 32-bit registers
The omap850 and omap730 use 16-bit registers instead of 32-bit, requiring
a modification of the register addresses in the mmc-omap driver. To resolve
this, a bit shift is performed on base register addresses, either by 1 or 2
bits depending on the CPU in use. This yields the correct registers for
each CPU.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Roel Kluin [Mon, 11 Jan 2010 23:14:47 +0000 (15:14 -0800)]
OMAP: dma_chan[lch_head].flag & OMAP_DMA_ACTIVE tested twice in omap_dma_unlink_lch()
The same flag and bits were tested twice.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Francisco Alecrim [Thu, 7 Jan 2010 02:20:00 +0000 (02:20 +0000)]
n8x0_defconfig: active cbus, retu-wd and omap-wd
It's critical for correct n8x0 operation. Device turn power-off after some
seconds without these options.
Signed-off-by: Francisco Alecrim <alecrim@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Mon, 11 Jan 2010 22:42:33 +0000 (14:42 -0800)]
cbus: add platform_data to pass gpios
also add the platform_data to the related
board files.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Mon, 11 Jan 2010 22:42:33 +0000 (14:42 -0800)]
cbus: move to platform_driver
also add the platform_device to 770 and n8x0 board files.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Mon, 11 Jan 2010 22:42:32 +0000 (14:42 -0800)]
cbus: separate into several MODULE_AUTHOR entries
will look cleaner on modinfo.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Mon, 11 Jan 2010 22:42:32 +0000 (14:42 -0800)]
cbus: move EXPORT_SYMBOL close to its exported symbols
while there, also add a missing static to cbus_bus_init().
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Mon, 11 Jan 2010 22:42:32 +0000 (14:42 -0800)]
cbus: switch to kzalloc
change kmalloc() + memset() to kzalloc(), no functional
changes.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
git.openpandora.org / pandora-kernel.git / log